Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 7.0 2018-12-30 r4883 [x86_64-linux-4.19.56-Unraid] (local build)
- Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Seagate Barracuda Compute
- Device Model: ST8000DM004-2CX188
- Serial Number: ZCT0X5B8
- LU WWN Device Id: 5 000c50 0b5e90f4f
- Firmware Version: 0001
- User Capacity: 8,001,563,222,016 bytes [8.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 5425 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ACS-3 T13/2161-D revision 5
- SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Thu Jul 18 17:22:14 2019 PDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM feature is: Unavailable
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- DSN feature is: Unavailable
- ATA Security is: Disabled, frozen [SEC2]
- Wt Cache Reorder: Unavailable
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 0) seconds.
- Offline data collection
- capabilities: (0x73) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- No Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: (1001) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x30a5) SCT Status supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-- 100 056 006 - 100928
- 3 Spin_Up_Time PO---- 094 094 000 - 0
- 4 Start_Stop_Count -O--CK 100 100 020 - 7
- 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
- 7 Seek_Error_Rate POSR-- 069 060 045 - 8233076
- 9 Power_On_Hours -O--CK 100 100 000 - 122 (137 70 0)
- 10 Spin_Retry_Count PO--C- 100 100 097 - 0
- 12 Power_Cycle_Count -O--CK 100 100 020 - 7
- 183 Runtime_Bad_Block -O--CK 100 100 000 - 0
- 184 End-to-End_Error -O--CK 100 100 099 - 0
- 187 Reported_Uncorrect -O--CK 098 098 000 - 2
- 188 Command_Timeout -O--CK 100 100 000 - 0
- 189 High_Fly_Writes -O-RCK 100 100 000 - 0
- 190 Airflow_Temperature_Cel -O---K 069 049 040 - 31 (Min/Max 31/33)
- 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
- 192 Power-Off_Retract_Count -O--CK 100 100 000 - 2
- 193 Load_Cycle_Count -O--CK 100 100 000 - 190
- 194 Temperature_Celsius -O---K 031 051 000 - 31 (0 26 0 0 0)
- 195 Hardware_ECC_Recovered -O-RC- 100 066 000 - 100928
- 197 Current_Pending_Sector -O--C- 100 100 000 - 0
- 198 Offline_Uncorrectable ----C- 100 100 000 - 0
- 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
- 240 Head_Flying_Hours ------ 100 253 000 - 90 (60 247 0)
- 241 Total_LBAs_Written ------ 100 253 000 - 4162932440
- 242 Total_LBAs_Read ------ 100 253 000 - 23192475821
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 5 Comprehensive SMART error log
- 0x03 GPL R/O 5 Ext. Comprehensive SMART error log
- 0x04 GPL,SL R/O 8 Device Statistics log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x08 GPL R/O 2 Power Conditions log
- 0x09 SL R/W 1 Selective self-test log
- 0x0c GPL R/O 2048 Pending Defects log
- 0x10 GPL R/O 1 NCQ Command Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters log
- 0x21 GPL R/O 1 Write stream error log
- 0x22 GPL R/O 1 Read stream error log
- 0x24 GPL R/O 512 Current Device Internal Status Data log
- 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xa1 GPL,SL VS 24 Device vendor specific log
- 0xa2 GPL VS 8160 Device vendor specific log
- 0xa6 GPL VS 192 Device vendor specific log
- 0xa8-0xa9 GPL,SL VS 136 Device vendor specific log
- 0xab GPL VS 1 Device vendor specific log
- 0xb0 GPL VS 9048 Device vendor specific log
- 0xbd GPL VS 8 Device vendor specific log
- 0xbe-0xbf GPL VS 65535 Device vendor specific log
- 0xc0 GPL,SL VS 1 Device vendor specific log
- 0xc1 GPL,SL VS 16 Device vendor specific log
- 0xc3 GPL,SL VS 8 Device vendor specific log
- 0xc4 GPL,SL VS 24 Device vendor specific log
- 0xd1 GPL VS 264 Device vendor specific log
- 0xd3 GPL VS 1920 Device vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
- Device Error Count: 2
- CR = Command Register
- FEATR = Features Register
- COUNT = Count (was: Sector Count) Register
- LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
- LH = LBA High (was: Cylinder High) Register ] LBA
- LM = LBA Mid (was: Cylinder Low) Register ] Register
- LL = LBA Low (was: Sector Number) Register ]
- DV = Device (was: Device/Head) Register
- DC = Device Control Register
- ER = Error register
- ST = Status register
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 2 [1] occurred at disk power-on lifetime: 107 hours (4 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 53 00 00 00 01 47 46 6a 48 00 00 Error: UNC at LBA = 0x147466a48 = 5490764360
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 25 00 00 01 00 00 01 47 46 69 b8 e0 00 08:17:25.944 READ DMA EXT
- 25 00 00 01 00 00 01 47 46 68 b8 e0 00 08:17:25.943 READ DMA EXT
- 25 00 00 01 00 00 01 47 46 67 b8 e0 00 08:17:25.942 READ DMA EXT
- 25 00 00 01 00 00 01 47 46 66 b8 e0 00 08:17:25.942 READ DMA EXT
- 25 00 00 01 00 00 01 47 46 65 b8 e0 00 08:17:25.942 READ DMA EXT
- Error 1 [0] occurred at disk power-on lifetime: 107 hours (4 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 53 00 00 00 01 47 46 60 d8 00 00 Error: UNC at LBA = 0x1474660d8 = 5490761944
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 25 00 00 01 00 00 01 47 46 60 b8 e0 00 08:17:03.953 READ DMA EXT
- 25 00 00 01 00 00 01 47 2e 5d b8 e0 00 08:16:56.983 READ DMA EXT
- 25 00 00 01 00 00 01 47 2e 5c b8 e0 00 08:16:56.982 READ DMA EXT
- 25 00 00 01 00 00 01 47 2e 5b b8 e0 00 08:16:56.981 READ DMA EXT
- 25 00 00 01 00 00 01 47 2e 5a b8 e0 00 08:16:56.981 READ DMA EXT
- SMART Extended Self-test Log Version: 1 (1 sectors)
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 522 (0x020a)
- Device State: Active (0)
- Current Temperature: 31 Celsius
- Power Cycle Min/Max Temperature: 30/33 Celsius
- Lifetime Min/Max Temperature: 26/50 Celsius
- Under/Over Temperature Limit Count: 0/0
- SCT Temperature History Version: 2
- Temperature Sampling Period: 3 minutes
- Temperature Logging Interval: 59 minutes
- Min/Max recommended Temperature: 14/55 Celsius
- Min/Max Temperature Limit: 10/60 Celsius
- Temperature History Size (Index): 128 (1)
- Index Estimated Time Temperature Celsius
- 2 2019-07-13 12:02 26 *******
- 3 2019-07-13 13:01 ? -
- 4 2019-07-13 14:00 27 ********
- 5 2019-07-13 14:59 30 ***********
- ... ..( 3 skipped). .. ***********
- 9 2019-07-13 18:55 30 ***********
- 10 2019-07-13 19:54 31 ************
- 11 2019-07-13 20:53 31 ************
- 12 2019-07-13 21:52 31 ************
- 13 2019-07-13 22:51 30 ***********
- 14 2019-07-13 23:50 31 ************
- 15 2019-07-14 00:49 30 ***********
- 16 2019-07-14 01:48 30 ***********
- 17 2019-07-14 02:47 29 **********
- ... ..( 2 skipped). .. **********
- 20 2019-07-14 05:44 29 **********
- 21 2019-07-14 06:43 27 ********
- 22 2019-07-14 07:42 ? -
- 23 2019-07-14 08:41 27 ********
- 24 2019-07-14 09:40 30 ***********
- 25 2019-07-14 10:39 30 ***********
- 26 2019-07-14 11:38 31 ************
- ... ..( 8 skipped). .. ************
- 35 2019-07-14 20:29 31 ************
- 36 2019-07-14 21:28 30 ***********
- ... ..( 6 skipped). .. ***********
- 43 2019-07-15 04:21 30 ***********
- 44 2019-07-15 05:20 31 ************
- ... ..( 13 skipped). .. ************
- 58 2019-07-15 19:06 31 ************
- 59 2019-07-15 20:05 30 ***********
- ... ..( 6 skipped). .. ***********
- 66 2019-07-16 02:58 30 ***********
- 67 2019-07-16 03:57 31 ************
- ... ..( 5 skipped). .. ************
- 73 2019-07-16 09:51 31 ************
- 74 2019-07-16 10:50 ? -
- 75 2019-07-16 11:49 31 ************
- ... ..( 3 skipped). .. ************
- 79 2019-07-16 15:45 31 ************
- 80 2019-07-16 16:44 32 *************
- 81 2019-07-16 17:43 ? -
- 82 2019-07-16 18:42 32 *************
- 83 2019-07-16 19:41 ? -
- 84 2019-07-16 20:40 32 *************
- 85 2019-07-16 21:39 31 ************
- 86 2019-07-16 22:38 31 ************
- 87 2019-07-16 23:37 30 ***********
- ... ..( 3 skipped). .. ***********
- 91 2019-07-17 03:33 30 ***********
- 92 2019-07-17 04:32 31 ************
- 93 2019-07-17 05:31 32 *************
- 94 2019-07-17 06:30 32 *************
- 95 2019-07-17 07:29 32 *************
- 96 2019-07-17 08:28 33 **************
- ... ..( 6 skipped). .. **************
- 103 2019-07-17 15:21 33 **************
- 104 2019-07-17 16:20 32 *************
- 105 2019-07-17 17:19 ? -
- 106 2019-07-17 18:18 32 *************
- 107 2019-07-17 19:17 33 **************
- 108 2019-07-17 20:16 32 *************
- 109 2019-07-17 21:15 32 *************
- 110 2019-07-17 22:14 33 **************
- 111 2019-07-17 23:13 31 ************
- ... ..( 3 skipped). .. ************
- 115 2019-07-18 03:09 31 ************
- 116 2019-07-18 04:08 32 *************
- 117 2019-07-18 05:07 32 *************
- 118 2019-07-18 06:06 31 ************
- ... ..( 10 skipped). .. ************
- 1 2019-07-18 16:55 31 ************
- SCT Error Recovery Control command not supported
- Device Statistics (GP Log 0x04)
- Page Offset Size Value Flags Description
- 0x01 ===== = = === == General Statistics (rev 1) ==
- 0x01 0x008 4 7 --- Lifetime Power-On Resets
- 0x01 0x010 4 122 --- Power-on Hours
- 0x01 0x018 6 4162932440 --- Logical Sectors Written
- 0x01 0x020 6 3336290 --- Number of Write Commands
- 0x01 0x028 6 23192476147 --- Logical Sectors Read
- 0x01 0x030 6 30728950 --- Number of Read Commands
- 0x01 0x038 6 - --- Date and Time TimeStamp
- 0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
- 0x03 0x008 4 122 --- Spindle Motor Power-on Hours
- 0x03 0x010 4 90 --- Head Flying Hours
- 0x03 0x018 4 190 --- Head Load Events
- 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
- 0x03 0x028 4 1 --- Read Recovery Attempts
- 0x03 0x030 4 0 --- Number of Mechanical Start Failures
- 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors
- 0x03 0x040 4 2 --- Number of High Priority Unload Events
- 0x04 ===== = = === == General Errors Statistics (rev 1) ==
- 0x04 0x008 4 21 --- Number of Reported Uncorrectable Errors
- 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
- 0x05 ===== = = === == Temperature Statistics (rev 1) ==
- 0x05 0x008 1 31 --- Current Temperature
- 0x05 0x010 1 31 --- Average Short Term Temperature
- 0x05 0x018 1 - --- Average Long Term Temperature
- 0x05 0x020 1 33 --- Highest Temperature
- 0x05 0x028 1 27 --- Lowest Temperature
- 0x05 0x030 1 32 --- Highest Average Short Term Temperature
- 0x05 0x038 1 29 --- Lowest Average Short Term Temperature
- 0x05 0x040 1 - --- Highest Average Long Term Temperature
- 0x05 0x048 1 - --- Lowest Average Long Term Temperature
- 0x05 0x050 4 0 --- Time in Over-Temperature
- 0x05 0x058 1 55 --- Specified Maximum Operating Temperature
- 0x05 0x060 4 0 --- Time in Under-Temperature
- 0x05 0x068 1 13 --- Specified Minimum Operating Temperature
- 0x06 ===== = = === == Transport Statistics (rev 1) ==
- 0x06 0x008 4 11 --- Number of Hardware Resets
- 0x06 0x010 4 5 --- Number of ASR Events
- 0x06 0x018 4 0 --- Number of Interface CRC Errors
- |||_ C monitored condition met
- ||__ D supports DSN
- |___ N normalized value
- Pending Defects log (GP Log 0x0c)
- No Defects Logged
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
- 0x0001 2 0 Command failed due to ICRC error
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement