johnvick

Untitled

Nov 5th, 2016
108
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. root@odroid:~# dmesg
  2. [ 0.000000] [c0] Booting Linux on physical CPU 0x100
  3. [ 0.000000] [c0] Initializing cgroup subsys cpuset
  4. [ 0.000000] [c0] Initializing cgroup subsys cpu
  5. [ 0.000000] [c0] Initializing cgroup subsys cpuacct
  6. [ 0.000000] [c0] Linux version 3.10.104+ (root@odroid-wheezy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP PREEMPT Wed Oct 26 16:17:46 CEST 2016
  7. [ 0.000000] [c0] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
  8. [ 0.000000] [c0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  9. [ 0.000000] [c0] Machine: ODROID-XU3, model: Hardkernel odroid-xu3 board based on EXYNOS5422
  10. [ 0.000000] [c0] ION: Contiguous 0x6650000 bytes @ 0x0 defined for 0:common
  11. [ 0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 2:mfc_sh
  12. [ 0.000000] [c0] ION: Contiguous 0x800000 bytes @ 0x0 defined for 10:g2d_wfd
  13. [ 0.000000] [c0] ION: Contiguous 0x6000000 bytes @ 0x0 defined for 11:video
  14. [ 0.000000] [c0] ION: Contiguous 0x1000000 bytes @ 0x0 defined for 7:mfc_input
  15. [ 0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 9:sectbl
  16. [ 0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 8:mfc_fw
  17. [ 0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 12:mfc_nfw
  18. [ 0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 13:secdma
  19. [ 0.000000] [c0] cma: CMA: reserved 104 MiB at b8000000
  20. [ 0.000000] [c0] cma: CMA: reserved 4 MiB at b7c00000
  21. [ 0.000000] [c0] cma: CMA: reserved 8 MiB at b7400000
  22. [ 0.000000] [c0] cma: CMA: reserved 96 MiB at b1400000
  23. [ 0.000000] [c0] cma: CMA: reserved 16 MiB at b0400000
  24. [ 0.000000] [c0] cma: CMA: reserved 4 MiB at b0000000
  25. [ 0.000000] [c0] cma: CMA: reserved 4 MiB at afc00000
  26. [ 0.000000] [c0] cma: CMA: reserved 4 MiB at af800000
  27. [ 0.000000] [c0] cma: CMA: reserved 4 MiB at af400000
  28. [ 0.000000] [c0] cma: CMA: reserved 256 MiB at 5f800000
  29. [ 0.000000] [c0] Memory policy: ECC disabled, Data cache writealloc
  30. [ 0.000000] [c0] create_mapping_memory: section: 40000000 ~ 6f800000
  31. [ 0.000000] [c0] CPU EXYNOS5422 (id 0xe5422001)
  32. [ 0.000000] [c0] On node 0 totalpages: 518656
  33. [ 0.000000] [c0] free_area_init_node: node 0, pgdat c0988340, node_mem_map c0df9000
  34. [ 0.000000] [c0] Normal zone: 1520 pages used for memmap
  35. [ 0.000000] [c0] Normal zone: 0 pages reserved
  36. [ 0.000000] [c0] Normal zone: 194560 pages, LIFO batch:31
  37. [ 0.000000] [c0] HighMem zone: 2532 pages used for memmap
  38. [ 0.000000] [c0] HighMem zone: 324096 pages, LIFO batch:31
  39. [ 0.000000] [c0] PERCPU: Embedded 9 pages/cpu @c1e07000 s14912 r8192 d13760 u36864
  40. [ 0.000000] [c0] pcpu-alloc: s14912 r8192 d13760 u36864 alloc=9*4096
  41. [ 0.000000] [c0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
  42. [ 0.000000] [c0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517136
  43. [ 0.000000] [c0] Kernel command line: console=tty1 root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro fsck.repair=yes drm_kms_helper.edid_firmware=edid/1920x1080.bin smsc95xx.macaddr=00:1e:06:61:7a:72 governor=performance hdmi_tx_amp_lvl=31 hdmi_tx_lvl_ch0=3 hdmi_tx_lvl_ch1=3 hdmi_tx_lvl_ch2=3 hdmi_tx_emp_lvl=6 hdmi_clk_amp_lvl=31 hdmi_tx_res=0 HPD=true vout=hdmi
  44. [ 0.000000] [c0] hdmi: using HDMI Mode
  45. [ 0.000000] [c0] PID hash table entries: 4096 (order: 2, 16384 bytes)
  46. [ 0.000000] [c0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  47. [ 0.000000] [c0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  48. [ 0.000000] [c0] allocated 4149248 bytes of page_cgroup
  49. [ 0.000000] [c0] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  50. [ 0.000000] [c0] Memory: 2026MB = 2026MB total
  51. [ 0.000000] [c0] Memory: 1522196k/1522196k available, 552428k reserved, 1046528K highmem
  52. [ 0.000000] [c0] Virtual kernel memory layout:
  53. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  54. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  55. vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  56. lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  57. pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  58. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  59. .text : 0xc0008000 - 0xc08acffc (8852 kB)
  60. .init : 0xc08ad000 - 0xc0917a40 ( 427 kB)
  61. .data : 0xc0918000 - 0xc098ebb8 ( 475 kB)
  62. .bss : 0xc098ebb8 - 0xc0df8d78 (4521 kB)
  63. [ 0.000000] [c0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  64. [ 0.000000] [c0] Preemptible hierarchical RCU implementation.
  65. [ 0.000000] [c0] NR_IRQS:16 nr_irqs:16 16
  66. [ 0.000000] [c0] apll 800000000
  67. [ 0.000000] [c0] bpll 825000000
  68. [ 0.000000] [c0] cpll 666000000
  69. [ 0.000000] [c0] dpll 600000000
  70. [ 0.000000] [c0] epll 180633609
  71. [ 0.000000] [c0] rpll 66000000
  72. [ 0.000000] [c0] ipll 432000000
  73. [ 0.000000] [c0] spll 800000000
  74. [ 0.000000] [c0] dout_spll_ctrl_div2 400000000
  75. [ 0.000000] [c0] vpll 400000000
  76. [ 0.000000] [c0] mpll 532000000
  77. [ 0.000000] [c0] Clock enables : TOP, MIF
  78. [ 0.000000] [c0] mmc0: dout_mmc0 666000000
  79. [ 0.000000] [c0] mmc1: dout_mmc1 800000000
  80. [ 0.000000] [c0] mmc2: dout_mmc2 666000000
  81. [ 0.000000] [c0] scaler: dout_aclk_400_mscl 333000000 aclk_400_mscl 333000000
  82. [ 0.000000] [c0] [g2d_init_clock:319] aclk_333_g2d:333000000
  83. [ 0.000000] [c0] gscaler: dout_aclk_300_gscl 300000000 aclk_300_gscl 300000000
  84. [ 0.000000] [c0] [jpeg_clock_init:374]jpeg: dout_aclk_300_jpeg 300000000 aclk_300_jpeg 300000000
  85. [ 0.000000] [c0] mfc: aclk_333 400000000
  86. [ 0.000000] [c0] Exynos5422: clock setup completed
  87. [ 0.000000] [c0] Exynos: pwm: clock setup completed
  88. [ 0.000000] [c0] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  89. [ 0.000000] [c0] Switching to timer-based delay loop
  90. [ 0.000000] [c0] EXYNOS5422 PMU Initialize
  91. [ 0.000000] [c0] Console: colour dummy device 80x30
  92. [ 0.000000] [c0] console [tty1] enabled
  93. [ 0.000000] [c0] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
  94. [ 0.000000] [c0] ... MAX_LOCKDEP_SUBCLASSES: 8
  95. [ 0.000000] [c0] ... MAX_LOCK_DEPTH: 48
  96. [ 0.000000] [c0] ... MAX_LOCKDEP_KEYS: 8191
  97. [ 0.000000] [c0] ... CLASSHASH_SIZE: 4096
  98. [ 0.000000] [c0] ... MAX_LOCKDEP_ENTRIES: 16384
  99. [ 0.000000] [c0] ... MAX_LOCKDEP_CHAINS: 32768
  100. [ 0.000000] [c0] ... CHAINHASH_SIZE: 16384
  101. [ 0.000000] [c0] memory used by lock dependency info: 3679 kB
  102. [ 0.000000] [c0] per task-struct memory footprint: 1152 bytes
  103. [ 0.007154] [c0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000)
  104. [ 0.007248] [c0] pid_max: default: 32768 minimum: 301
  105. [ 0.007749] [c0] Mount-cache hash table entries: 512
  106. [ 0.043722] [c0] Initializing cgroup subsys debug
  107. [ 0.043797] [c0] Initializing cgroup subsys memory
  108. [ 0.043912] [c0] Initializing cgroup subsys devices
  109. [ 0.043977] [c0] Initializing cgroup subsys freezer
  110. [ 0.044039] [c0] Initializing cgroup subsys blkio
  111. [ 0.044088] [c0] Initializing cgroup subsys perf_event
  112. [ 0.044346] [c0] CPU: Testing write buffer coherency: ok
  113. [ 0.044444] [c0] ftrace: allocating 22999 entries in 68 pages
  114. [ 0.093228] [c0] /cpus/cpu@0 missing clock-frequency property
  115. [ 0.093297] [c0] /cpus/cpu@1 missing clock-frequency property
  116. [ 0.093344] [c0] /cpus/cpu@2 missing clock-frequency property
  117. [ 0.093391] [c0] /cpus/cpu@3 missing clock-frequency property
  118. [ 0.093435] [c0] /cpus/cpu@4 missing clock-frequency property
  119. [ 0.093479] [c0] /cpus/cpu@5 missing clock-frequency property
  120. [ 0.093524] [c0] /cpus/cpu@6 missing clock-frequency property
  121. [ 0.093568] [c0] /cpus/cpu@7 missing clock-frequency property
  122. [ 0.093667] [c0] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
  123. [ 0.093874] [c0] Running under secure firmware.
  124. [ 0.093946] [c0] Setting up static identity map for 0xc0625620 - 0xc0625678
  125. [ 0.094004] [c0] Exynos-SnapShot: exynos_ss_init failed
  126. [ 0.114363] [c0] ftrace: Allocated trace_printk buffers
  127. [ 0.136029] [c0] cpu1: SWRESET
  128. [ 0.136285] [c1] CPU1: Booted secondary processor
  129. [ 0.136314] [c1] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
  130. [ 0.145967] [c0] cpu2: SWRESET
  131. [ 0.146284] [c2] CPU2: Booted secondary processor
  132. [ 0.146311] [c2] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
  133. [ 0.155948] [c0] cpu3: SWRESET
  134. [ 0.156259] [c3] CPU3: Booted secondary processor
  135. [ 0.156286] [c3] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
  136. [ 0.165211] [c4] CPU4: Booted secondary processor
  137. [ 0.165988] [c4] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
  138. [ 0.175204] [c5] CPU5: Booted secondary processor
  139. [ 0.175981] [c5] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
  140. [ 0.185225] [c6] CPU6: Booted secondary processor
  141. [ 0.186003] [c6] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
  142. [ 0.195210] [c7] CPU7: Booted secondary processor
  143. [ 0.195988] [c7] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
  144. [ 0.196250] [c0] Brought up 8 CPUs
  145. [ 0.196571] [c0] SMP: Total of 8 processors activated (384.00 BogoMIPS).
  146. [ 0.196612] [c0] CPU: All CPU(s) started in HYP mode.
  147. [ 0.196648] [c0] CPU: Virtualization extensions available.
  148. [ 0.199138] [c0] devtmpfs: initialized
  149. [ 0.237892] [c6] sched: registering cpufreq notifiers for scale-invariant loads
  150. [ 0.240340] [c6] pinctrl core: initialized pinctrl subsystem
  151. [ 0.241422] [c6] regulator-dummy: no parameters
  152. [ 0.251241] [c6] NET: Registered protocol family 16
  153. [ 0.251801] [c6] DMA: preallocated 256 KiB pool for atomic coherent allocations
  154. [ 0.258621] [c6] gpiochip_add: registered GPIOs 0 to 7 on device: gpy7
  155. [ 0.258799] [c6] gpiochip_add: registered GPIOs 8 to 15 on device: gpx0
  156. [ 0.258966] [c6] gpiochip_add: registered GPIOs 16 to 23 on device: gpx1
  157. [ 0.259133] [c6] gpiochip_add: registered GPIOs 24 to 31 on device: gpx2
  158. [ 0.259305] [c6] gpiochip_add: registered GPIOs 32 to 39 on device: gpx3
  159. [ 0.261263] [c6] gpiochip_add: registered GPIOs 40 to 47 on device: gpc0
  160. [ 0.261440] [c6] gpiochip_add: registered GPIOs 48 to 55 on device: gpc1
  161. [ 0.261607] [c6] gpiochip_add: registered GPIOs 56 to 62 on device: gpc2
  162. [ 0.261774] [c6] gpiochip_add: registered GPIOs 63 to 66 on device: gpc3
  163. [ 0.261946] [c6] gpiochip_add: registered GPIOs 67 to 68 on device: gpc4
  164. [ 0.262123] [c6] gpiochip_add: registered GPIOs 69 to 76 on device: gpd1
  165. [ 0.262294] [c6] gpiochip_add: registered GPIOs 77 to 82 on device: gpy0
  166. [ 0.262461] [c6] gpiochip_add: registered GPIOs 83 to 86 on device: gpy1
  167. [ 0.262627] [c6] gpiochip_add: registered GPIOs 87 to 92 on device: gpy2
  168. [ 0.262803] [c6] gpiochip_add: registered GPIOs 93 to 100 on device: gpy3
  169. [ 0.262970] [c6] gpiochip_add: registered GPIOs 101 to 108 on device: gpy4
  170. [ 0.263138] [c6] gpiochip_add: registered GPIOs 109 to 116 on device: gpy5
  171. [ 0.263316] [c6] gpiochip_add: registered GPIOs 117 to 124 on device: gpy6
  172. [ 0.265051] [c6] gpiochip_add: registered GPIOs 125 to 132 on device: gpe0
  173. [ 0.265228] [c6] gpiochip_add: registered GPIOs 133 to 134 on device: gpe1
  174. [ 0.265397] [c6] gpiochip_add: registered GPIOs 135 to 140 on device: gpf0
  175. [ 0.265565] [c6] gpiochip_add: registered GPIOs 141 to 148 on device: gpf1
  176. [ 0.265738] [c6] gpiochip_add: registered GPIOs 149 to 156 on device: gpg0
  177. [ 0.265907] [c6] gpiochip_add: registered GPIOs 157 to 164 on device: gpg1
  178. [ 0.266108] [c6] gpiochip_add: registered GPIOs 165 to 166 on device: gpg2
  179. [ 0.266285] [c6] gpiochip_add: registered GPIOs 167 to 170 on device: gpj4
  180. [ 0.267721] [c6] gpiochip_add: registered GPIOs 171 to 178 on device: gpa0
  181. [ 0.267895] [c6] gpiochip_add: registered GPIOs 179 to 184 on device: gpa1
  182. [ 0.268066] [c6] gpiochip_add: registered GPIOs 185 to 192 on device: gpa2
  183. [ 0.268243] [c6] gpiochip_add: registered GPIOs 193 to 197 on device: gpb0
  184. [ 0.268443] [c6] gpiochip_add: registered GPIOs 198 to 202 on device: gpb1
  185. [ 0.268633] [c6] gpiochip_add: registered GPIOs 203 to 206 on device: gpb2
  186. [ 0.268813] [c6] gpiochip_add: registered GPIOs 207 to 214 on device: gpb3
  187. [ 0.268987] [c6] gpiochip_add: registered GPIOs 215 to 216 on device: gpb4
  188. [ 0.269160] [c6] gpiochip_add: registered GPIOs 217 to 224 on device: gph0
  189. [ 0.271116] [c6] gpiochip_add: registered GPIOs 225 to 231 on device: gpz
  190. [ 0.290981] [c6] syscon 10040000.system-controller: regmap [mem 0x10040000-0x10044fff] registered
  191. [ 0.291516] [c6] syscon 10050000.syscon: regmap [mem 0x10050000-0x10054fff] registered
  192. [ 0.299365] [c6] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  193. [ 0.299415] [c6] hw-breakpoint: maximum watchpoint size is 8 bytes.
  194. [ 0.301384] [c6] S3C Power Management, Copyright 2004 Simtec Electronics
  195. [ 0.305579] [c6] PM DOMAIN: pd-cam has a new child pd-isp.
  196. [ 0.306500] [c6] PM DOMAIN: pd-gscl has a new child pd-cam.
  197. [ 0.306551] [c6] EXYNOS5: PM Domain Initialize
  198. [ 0.306857] [c6] pd-gscl - on
  199. [ 0.307046] [c6] pd-isp - on
  200. [ 0.307235] [c6] pd-mfc - on
  201. [ 0.307268] [c6] pd-g3d - on, always
  202. [ 0.307303] [c6] pd-disp1 - on, always
  203. [ 0.307496] [c6] pd-maudio - on
  204. [ 0.307529] [c6] pd-g2d - on, always
  205. [ 0.307721] [c6] pd-mscl - on
  206. [ 0.307755] [c6] pd-fsys - on, always
  207. [ 0.307791] [c6] pd-psgen - on, always
  208. [ 0.307826] [c6] pd-peric - on, always
  209. [ 0.307859] [c6] pd-wcore - on, always
  210. [ 0.308053] [c6] pd-cam - on
  211. [ 0.308093] [c6] EXYNOS: Initializing architecture
  212. [ 0.309715] [c6] exynos-sysmmu 10a60000.sysmmu: --> 10850000.fimg2d
  213. [ 0.309760] [c6] exynos-sysmmu 10a60000.sysmmu: [OK]
  214. [ 0.310110] [c6] exynos-sysmmu 10a70000.sysmmu: --> 10850000.fimg2d
  215. [ 0.310154] [c6] exynos-sysmmu 10a70000.sysmmu: [OK]
  216. [ 0.310508] [c6] exynos-sysmmu 14650000.sysmmu: --> 14450000.mixer
  217. [ 0.310551] [c6] exynos-sysmmu 14650000.sysmmu: [OK]
  218. [ 0.310880] [c6] exynos-sysmmu 13e80000.sysmmu: --> 13e00000.gsc
  219. [ 0.310922] [c6] exynos-sysmmu 13e80000.sysmmu: [OK]
  220. [ 0.311282] [c6] exynos-sysmmu 13e90000.sysmmu: --> 13e10000.gsc
  221. [ 0.311325] [c6] exynos-sysmmu 13e90000.sysmmu: [OK]
  222. [ 0.311660] [c6] exynos-sysmmu 12880000.sysmmu: --> 12800000.scaler
  223. [ 0.311703] [c6] exynos-sysmmu 12880000.sysmmu: [OK]
  224. [ 0.312039] [c6] exynos-sysmmu 12890000.sysmmu: --> 12810000.scaler
  225. [ 0.312081] [c6] exynos-sysmmu 12890000.sysmmu: [OK]
  226. [ 0.312433] [c6] exynos-sysmmu 128a0000.sysmmu: --> 12820000.scaler
  227. [ 0.312475] [c6] exynos-sysmmu 128a0000.sysmmu: [OK]
  228. [ 0.312807] [c6] exynos-sysmmu 128c0000.sysmmu: --> 12800000.scaler
  229. [ 0.312850] [c6] exynos-sysmmu 128c0000.sysmmu: [OK]
  230. [ 0.313182] [c6] exynos-sysmmu 128d0000.sysmmu: --> 12810000.scaler
  231. [ 0.313224] [c6] exynos-sysmmu 128d0000.sysmmu: [OK]
  232. [ 0.313558] [c6] exynos-sysmmu 128e0000.sysmmu: --> 12820000.scaler
  233. [ 0.313600] [c6] exynos-sysmmu 128e0000.sysmmu: [OK]
  234. [ 0.313929] [c6] exynos-sysmmu 11f10000.sysmmu: --> 11f50000.jpeg
  235. [ 0.313971] [c6] exynos-sysmmu 11f10000.sysmmu: [OK]
  236. [ 0.314311] [c6] exynos-sysmmu 11f20000.sysmmu: --> 11f60000.jpeg
  237. [ 0.314353] [c6] exynos-sysmmu 11f20000.sysmmu: [OK]
  238. [ 0.314678] [c6] exynos-sysmmu 11200000.sysmmu: --> 11000000.mfc
  239. [ 0.314719] [c6] exynos-sysmmu 11200000.sysmmu: [OK]
  240. [ 0.315034] [c6] exynos-sysmmu 11210000.sysmmu: --> 11000000.mfc
  241. [ 0.315075] [c6] exynos-sysmmu 11210000.sysmmu: [OK]
  242. [ 0.315442] [c6] exynos-sysmmu 14640000.sysmmu: --> 14400000.fimd
  243. [ 0.315484] [c6] exynos-sysmmu 14640000.sysmmu: [OK]
  244. [ 0.315844] [c6] exynos-sysmmu 14680000.sysmmu: --> 14400000.fimd
  245. [ 0.315886] [c6] exynos-sysmmu 14680000.sysmmu: [OK]
  246. [ 0.316365] [c6] CPU Info : Samsung Exynos5422 Soc is BIN1
  247. [ 0.316401] [c6] Exynos5422 ASV : Use Fusing Speed Group 5
  248. [ 0.316433] [c6] Exynos5422 ASV : invalid IDS value
  249. [ 0.316464] [c6] EXYNOS5422 ASV : IDS : 0 HPM : 0
  250. [ 0.316523] [c6] VDD_ARM ASV group is 5
  251. [ 0.316555] [c6] VDD_KFC ASV group is 5
  252. [ 0.316586] [c6] VDD_INT ASV group is 5
  253. [ 0.316616] [c6] VDD_MIF ASV group is 5
  254. [ 0.316646] [c6] VDD_G3D ASV group is 5
  255. [ 0.316676] [c6] VDD_ISP ASV group is 5
  256. [ 0.330385] [c7] bio: create slab <bio-0> at 0
  257. [ 0.332181] [c7] of_get_named_gpio_flags exited with status 119
  258. [ 0.332434] [c7] VUSB_BOOST_5V: 5000 mV
  259. [ 0.332748] [c7] of_get_named_gpio_flags: can't parse gpios property
  260. [ 0.332963] [c7] MAIN_DC: no parameters
  261. [ 0.333225] [c7] of_get_named_gpio_flags: can't parse gpios property
  262. [ 0.333444] [c7] hdmi-en: no parameters
  263. [ 0.334647] [c7] SCSI subsystem initialized
  264. [ 0.335072] [c7] usbcore: registered new interface driver usbfs
  265. [ 0.335202] [c7] usbcore: registered new interface driver hub
  266. [ 0.335442] [c7] usbcore: registered new device driver usb
  267. [ 0.341512] [c4] vdd_mif: 700 <--> 1300 mV at 1100 mV
  268. [ 0.342682] [c4] vdd_eagle: 800 <--> 1500 mV at 1000 mV
  269. [ 0.343838] [c4] vdd_int: 800 <--> 1400 mV at 1000 mV
  270. [ 0.344987] [c4] vdd_g3d: 700 <--> 1400 mV at 1000 mV
  271. [ 0.346175] [c4] vdd_kfc: 800 <--> 1500 mV at 1025 mV
  272. [ 0.347942] [c4] vddf_2v85: 3300 mV
  273. [ 0.349247] [c4] vdd_adc: 1800 mV
  274. [ 0.350602] [c4] vdd_pll: 1800 mV
  275. [ 0.351960] [c4] vdd_ldo6: 1000 mV
  276. [ 0.353263] [c4] vdd_ldo7: 1800 mV
  277. [ 0.354559] [c4] vdd_ldo8: 1800 mV
  278. [ 0.355983] [c4] vdd_ldo9: 3300 mV
  279. [ 0.357307] [c4] vdd_ldo10: 1800 mV
  280. [ 0.358602] [c4] vdd_ldo11: 1000 mV
  281. [ 0.359717] [c4] vdd_ldo13: 1800 <--> 3300 mV at 3300 mV
  282. [ 0.361205] [c4] vdd_ldo15: 3300 mV
  283. [ 0.362635] [c4] vdd_eth: 3300 mV
  284. [ 0.363941] [c4] vdd_ldo18: 1850 mV
  285. [ 0.365059] [c4] vdd_ldo19: 2800 <--> 3300 mV at 3300 mV
  286. [ 0.366053] [c4] vdd_mifs: 800 <--> 1100 mV at 925 mV
  287. [ 0.367397] [c4] vdd_ldo26: 3000 mV
  288. [ 0.368386] [c4] vdd_g3ds: 800 <--> 1100 mV at 950 mV
  289. [ 0.369753] [c4] vdd_ldo28: 3300 mV
  290. [ 0.371100] [c4] vdd_ldo30: 3300 mV
  291. [ 0.374047] [c4] of_get_named_gpio_flags exited with status 177
  292. [ 0.374079] [c4] of_get_named_gpio_flags exited with status 178
  293. [ 0.374989] [c4] i2c-gpio i2c_gpio.8: using pins 177 (SDA) and 178 (SCL)
  294. [ 0.375150] [c4] media: Linux media interface: v0.10
  295. [ 0.375254] [c4] Linux video capture interface: v2.00
  296. [ 0.377377] [c5] IOVMMU: Created debugfs entry at debugfs/iovmm
  297. [ 0.377991] [c5] Advanced Linux Sound Architecture Driver Initialized.
  298. [ 0.378635] [c5] PM DOMAIN: pd-maudio, Device : 3810000.lpass Registered
  299. [ 0.378698] [c5] Samsung Low Power Audio Subsystem driver, (c)2013 Samsung Electronics
  300. [ 0.380718] [c5] Loading modules backported from Linux version next-20150222-0-g53e418f1
  301. [ 0.380767] [c5] Backport integrated by backports.git backports-20150222-0-g2745ccd
  302. [ 0.382607] [c5] Switching to clocksource mct-frc
  303. [ 0.460424] [c5] NET: Registered protocol family 2
  304. [ 0.462211] [c5] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  305. [ 0.462711] [c5] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
  306. [ 0.464744] [c5] TCP: Hash tables configured (established 8192 bind 8192)
  307. [ 0.464887] [c5] TCP: reno registered
  308. [ 0.464936] [c5] UDP hash table entries: 512 (order: 3, 40960 bytes)
  309. [ 0.465236] [c5] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
  310. [ 0.466320] [c5] NET: Registered protocol family 1
  311. [ 0.466844] [c5] Unpacking initramfs...
  312. [ 0.766388] [c4] Freeing initrd memory: 3928K (c2001000 - c23d7000)
  313. [ 0.780361] [c4] bounce pool size: 64 pages
  314. [ 0.789083] [c4] VFS: Disk quotas dquot_6.5.2
  315. [ 0.789472] [c4] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  316. [ 0.792305] [c4] ROMFS MTD (C) 2007 Red Hat, Inc.
  317. [ 0.792886] [c4] msgmni has been set to 1448
  318. [ 0.796956] [c4] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  319. [ 0.797388] [c4] io scheduler noop registered
  320. [ 0.797424] [c4] io scheduler deadline registered
  321. [ 0.797678] [c4] io scheduler cfq registered (default)
  322. [ 0.807422] [c4] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330
  323. [ 0.807472] [c4] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
  324. [ 0.813449] [c4] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330
  325. [ 0.813498] [c4] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  326. [ 0.819300] [c4] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330
  327. [ 0.819348] [c4] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  328. [ 0.822448] [c4] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330
  329. [ 0.822495] [c4] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6
  330. [ 0.966618] [c4] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  331. [ 0.969475] [c4] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 83) is a S3C6400/10
  332. [ 0.970248] [c4] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 84) is a S3C6400/10
  333. [ 0.971068] [c4] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 85) is a S3C6400/10
  334. [ 0.971808] [c4] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 86) is a S3C6400/10
  335. [ 0.975143] [c4] [drm] Initialized drm 1.1.0 20060810
  336. [ 0.978489] [c4] of_get_named_gpio_flags exited with status 39
  337. [ 0.982570] [c4] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  338. [ 0.982615] [c4] [drm] No driver support for vblank timestamp query.
  339. [ 0.982663] [c4] exynos-mixer 14450000.mixer: probe start
  340. [ 0.983004] [c4] exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops)
  341. [ 0.983358] [c4] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_component_ops)
  342. [ 0.983435] [c4] [drm] Initialized exynos 1.0.0 20110530 on minor 0
  343. [ 0.984063] [c4] mali 11800000.mali: Continuing without Mali clock control
  344. [ 0.987666] [c4] hrtimer: interrupt took 119750 ns
  345. [ 0.988080] [c4] mali 11800000.mali: GPU identified as 0x0620 r0p1 status 0
  346. [ 0.994090] mali 11800000.mali: Probed as mali0
  347. [ 1.002535] [c6] loop: module loaded
  348. [ 1.007609] [c6] of_get_named_gpio_flags exited with status 48
  349. [ 1.007636] [c6] of_get_named_gpio_flags exited with status 37
  350. [ 1.210285] [c6] of_get_named_gpio_flags exited with status 17
  351. [ 1.210312] [c6] of_get_named_gpio_flags exited with status 36
  352. [ 1.411850] [c6] dwc3 12400000.dwc3: dwc3_otg address space is not supported
  353. [ 1.412971] [c6] dwc3 12400000.dwc3: Binding gadget dwc3-gadget
  354. [ 1.413792] [c7] dwc3 12400000.dwc3: Turn on host
  355. [ 1.614932] [c7] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  356. [ 1.614975] [c7] ehci-s5p: EHCI s5p driver
  357. [ 1.615316] [c7] of_get_named_gpio_flags exited with status 121
  358. [ 1.615589] [c7] s5p-ehci 12110000.usb: EHCI Host Controller
  359. [ 1.615737] [c7] s5p-ehci 12110000.usb: new USB bus registered, assigned bus number 1
  360. [ 1.615991] [c7] s5p-ehci 12110000.usb: irq 103, io mem 0x12110000
  361. [ 1.622866] [c7] s5p-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
  362. [ 1.624327] [c7] hub 1-0:1.0: USB hub found
  363. [ 1.624389] [c7] hub 1-0:1.0: 3 ports detected
  364. [ 1.625768] [c7] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  365. [ 1.626203] [c7] exynos-ohci 12120000.usb: EXYNOS OHCI Host Controller
  366. [ 1.626278] [c7] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2
  367. [ 1.626377] [c7] exynos-ohci 12120000.usb: irq 103, io mem 0x12120000
  368. [ 1.683189] [c7] hub 2-0:1.0: USB hub found
  369. [ 1.683248] [c7] hub 2-0:1.0: 3 ports detected
  370. [ 1.684861] [c7] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
  371. [ 1.684933] [c7] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3
  372. [ 1.685229] [c7] xhci-hcd xhci-hcd.2.auto: irq 104, io mem 0x12000000
  373. [ 1.686148] [c7] xHCI xhci_add_endpoint called for root hub
  374. [ 1.686165] [c7] xHCI xhci_check_bandwidth called for root hub
  375. [ 1.686440] [c7] hub 3-0:1.0: USB hub found
  376. [ 1.686535] [c7] hub 3-0:1.0: 1 port detected
  377. [ 1.687125] [c7] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
  378. [ 1.687190] [c7] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4
  379. [ 1.688258] [c7] xHCI xhci_add_endpoint called for root hub
  380. [ 1.688274] [c7] xHCI xhci_check_bandwidth called for root hub
  381. [ 1.688558] [c7] hub 4-0:1.0: USB hub found
  382. [ 1.688617] [c7] hub 4-0:1.0: 1 port detected
  383. [ 1.689324] [c7] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
  384. [ 1.689396] [c7] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 5
  385. [ 1.689701] [c7] xhci-hcd xhci-hcd.5.auto: irq 105, io mem 0x12400000
  386. [ 1.690627] [c7] xHCI xhci_add_endpoint called for root hub
  387. [ 1.690643] [c7] xHCI xhci_check_bandwidth called for root hub
  388. [ 1.690924] [c7] hub 5-0:1.0: USB hub found
  389. [ 1.690986] [c7] hub 5-0:1.0: 1 port detected
  390. [ 1.691573] [c7] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
  391. [ 1.691637] [c7] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 6
  392. [ 1.692615] [c7] xHCI xhci_add_endpoint called for root hub
  393. [ 1.692632] [c7] xHCI xhci_check_bandwidth called for root hub
  394. [ 1.692982] [c7] hub 6-0:1.0: USB hub found
  395. [ 1.693042] [c7] hub 6-0:1.0: 1 port detected
  396. [ 1.693913] [c7] usbcore: registered new interface driver usb-storage
  397. [ 1.694145] [c7] usbcore: registered new interface driver usbserial
  398. [ 1.694267] [c7] usbcore: registered new interface driver usbserial_generic
  399. [ 1.694389] [c7] usbserial: USB Serial support registered for generic
  400. [ 1.695189] [c7] of_get_named_gpio_flags: can't parse gpios property
  401. [ 1.695210] [c7] exynos-usb-switch usb-switch.10: host detect gpio is not available
  402. [ 1.695257] [c7] of_get_named_gpio_flags: can't parse gpios property
  403. [ 1.695275] [c7] exynos-usb-switch usb-switch.10: device detect gpio is not available
  404. [ 1.695318] [c7] of_get_named_gpio_flags: can't parse gpios property
  405. [ 1.695335] [c7] exynos-usb-switch usb-switch.10: vbus control gpio is not available
  406. [ 1.695405] [c7] exynos-usb-switch usb-switch.10: failed to configure pins
  407. [ 1.695643] [c7] exynos-usb-switch usb-switch.10: udc device is not available
  408. [ 1.695684] [c7] exynos-usb-switch usb-switch.10: Disable device detect IRQ
  409. [ 1.695731] [c7] usb cable = 1
  410. [ 1.696731] [c7] mousedev: PS/2 mouse device common for all mice
  411. [ 1.700358] [c7] s2m-rtc s2m-rtc: s2m_rtc_enable_wtsr: enable WTSR
  412. [ 1.700697] [c7] s2m-rtc s2m-rtc: s2m_rtc_enable_smpl: enable SMPL
  413. [ 1.701193] [c7] s2m_rtc_enable_smpl: WTSR_SMPL(0xc7)
  414. [ 1.705646] [c7] s2m-rtc s2m-rtc: rtc core: registered s2m-rtc as rtc0
  415. [ 1.706543] [c7] i2c /dev entries driver
  416. [ 1.707934] [c7] IR NEC protocol handler initialized
  417. [ 1.707973] [c7] IR RC5(x) protocol handler initialized
  418. [ 1.708008] [c7] IR RC6 protocol handler initialized
  419. [ 1.708042] [c7] IR JVC protocol handler initialized
  420. [ 1.708075] [c7] IR Sony protocol handler initialized
  421. [ 1.708108] [c7] IR RC5 (streamzap) protocol handler initialized
  422. [ 1.708144] [c7] IR SANYO protocol handler initialized
  423. [ 1.708178] [c7] IR MCE Keyboard/mouse protocol handler initialized
  424. [ 1.708732] [c7] PM DOMAIN: pd-mfc, Device : 11000000.mfc Registered
  425. [ 1.708794] [c7] s5p-mfc 11000000.mfc: exynos-iommu gpd_dev_ops inserted!
  426. [ 1.708858] [c7] s5p-mfc 11000000.mfc: s5p_mfc_probe()
  427. [ 1.708886] [c7] s5p-mfc 11000000.mfc: of alias get id : mfc-0
  428. [ 1.709640] [c7] s5p-mfc 11000000.mfc: decoder registered as /dev/video6
  429. [ 1.710004] [c7] s5p-mfc 11000000.mfc: encoder registered as /dev/video7
  430. [ 1.710404] [c7] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
  431. [ 1.710472] [c7] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x50000000.
  432. [ 1.710529] [c7] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0x70000000.
  433. [ 1.710593] [c7] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x80000000.
  434. [ 1.710655] [c7] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0xb0000000.
  435. [ 1.710712] [c7] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
  436. [ 1.711773] [c7] ion_cma ion_mfc_nfw: Alread isolated!
  437. [ 1.711810] [c7] s5p_mfc_probe--
  438. [ 1.712141] [c7] S5P CEC for Exynos4 Driver, (c) 2009 Samsung Electronics
  439. [ 1.713039] [c7] of_get_named_gpio_flags exited with status 38
  440. [ 1.713158] [c7] s5p-tvout-cec 101b0000.cec: success request GPIO for hdmi-cec
  441. [ 1.713255] s5p-tvout-cec 101b0000.cec: probe successful
  442. [ 1.714794] [c7] TRIMINFO[0] = 0x80682f
  443. [ 1.714829] [c7] TMU_CONTROL[0] = 0x10609803
  444. [ 1.714860] [c7] CURRENT_TEMP[0] = 0x0
  445. [ 1.714889] [c7] THRESHOLD_TEMP_RISE[0] = 0x847f7a75
  446. [ 1.714921] [c7] THRESHOLD_TEMP_FALL[0] = 0x827d7873
  447. [ 1.714952] [c7] INTEN[0] = 0x11111111
  448. [ 1.714980] [c7] INTCLEAR[0] = 0x0
  449. [ 1.715040] [c7] TRIMINFO[1] = 0x805e23
  450. [ 1.715069] [c7] TMU_CONTROL[1] = 0x10609803
  451. [ 1.715098] [c7] CURRENT_TEMP[1] = 0x0
  452. [ 1.715126] [c7] THRESHOLD_TEMP_RISE[1] = 0x78736e69
  453. [ 1.715157] [c7] THRESHOLD_TEMP_FALL[1] = 0x76716c67
  454. [ 1.715188] [c7] INTEN[1] = 0x11111111
  455. [ 1.715215] [c7] INTCLEAR[1] = 0x0
  456. [ 1.715274] [c7] TRIMINFO[2] = 0x806a32
  457. [ 1.715303] [c7] TMU_CONTROL[2] = 0x10609803
  458. [ 1.715332] [c7] CURRENT_TEMP[2] = 0x0
  459. [ 1.715360] [c7] THRESHOLD_TEMP_RISE[2] = 0x87827d78
  460. [ 1.715390] [c7] THRESHOLD_TEMP_FALL[2] = 0x85807b76
  461. [ 1.715421] [c7] INTEN[2] = 0x11111111
  462. [ 1.715449] [c7] INTCLEAR[2] = 0x0
  463. [ 1.715507] [c7] TRIMINFO[3] = 0x806b32
  464. [ 1.715536] [c7] TMU_CONTROL[3] = 0x10609803
  465. [ 1.715565] [c7] CURRENT_TEMP[3] = 0x0
  466. [ 1.715593] [c7] THRESHOLD_TEMP_RISE[3] = 0x85807b76
  467. [ 1.715623] [c7] THRESHOLD_TEMP_FALL[3] = 0x837e7974
  468. [ 1.715654] [c7] INTEN[3] = 0x11111111
  469. [ 1.715682] [c7] INTCLEAR[3] = 0x0
  470. [ 1.715741] [c7] TRIMINFO[4] = 0x806930
  471. [ 1.715770] [c7] TMU_CONTROL[4] = 0x10609803
  472. [ 1.715799] [c7] CURRENT_TEMP[4] = 0x0
  473. [ 1.715827] [c7] THRESHOLD_TEMP_RISE[4] = 0x87827d78
  474. [ 1.715858] [c7] THRESHOLD_TEMP_FALL[4] = 0x85807b76
  475. [ 1.715889] [c7] INTEN[4] = 0x11111111
  476. [ 1.715916] [c7] INTCLEAR[4] = 0x0
  477. [ 1.717337] [c7] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled
  478. [ 1.718297] [c7] device-mapper: uevent: version 1.0.3
  479. [ 1.718936] [c7] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
  480. [ 1.719861] [c7] cpuidle: using governor ladder
  481. [ 1.721536] [c7] cpuidle: using governor menu
  482. [ 1.721626] [c7] Synopsys Designware Multimedia Card Interface Driver
  483. [ 1.722740] [c7] dwmmc_exynos 12200000.dwmmc0: Clock pin control Pin:gpc0-0 Addr:13410000.pinctrl Val:3 Num:4
  484. [ 1.723149] of_get_named_gpio_flags exited with status 69
  485. [ 1.723196] [c7] dwmmc_exynos 12200000.dwmmc0: dw_mci_parse_dt : emmc h/w reset gpio[69] notifier registered.
  486. [ 1.723368] [c7] dwmmc_exynos 12200000.dwmmc0: Using internal DMA controller.
  487. [ 1.723425] [c7] dwmmc_exynos 12200000.dwmmc0: FIFOTH: 0x 300f0030
  488. [ 1.723472] dwmmc_exynos 12200000.dwmmc0: Version ID is 250a
  489. [ 1.724035] [c4] dwmmc_exynos 12200000.dwmmc0: DW MMC controller at irq 107, 64 bit host data width, 64 deep fifo
  490. [ 1.742914] [c4] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 400000Hz, actual 385416HZ div = 27)
  491. [ 1.758076] [c4] dwmmc_exynos 12200000.dwmmc0: 1 slots initialized
  492. [ 1.758694] [c4] dwmmc_exynos 12220000.dwmmc2: Clock pin control Pin:gpc2-0 Addr:13410000.pinctrl Val:3 Num:3
  493. [ 1.758809] of_get_named_gpio_flags: can't parse gpios property
  494. [ 1.758920] [c4] dwmmc_exynos 12220000.dwmmc2: Using internal DMA controller.
  495. [ 1.758967] [c4] dwmmc_exynos 12220000.dwmmc2: FIFOTH: 0x 300f0030
  496. [ 1.759004] dwmmc_exynos 12220000.dwmmc2: Version ID is 250a
  497. [ 1.759440] [c4] dwmmc_exynos 12220000.dwmmc2: DW MMC controller at irq 109, 64 bit host data width, 64 deep fifo
  498. [ 1.759850] [c4] mmc1: vmmc regulator found
  499. [ 1.760023] [c4] mmc1: vqmmc regulator found
  500. [ 1.777899] [c4] mmc_host mmc1: Bus speed (slot 0) = 20812500Hz (slot req 400000Hz, actual 385416HZ div = 27)
  501. [ 1.793068] [c4] dwmmc_exynos 12220000.dwmmc2: 1 slots initialized
  502. [ 1.794252] [c4] leds-gpio leds.15: pins are not configured from the driver
  503. [ 1.794319] [c4] of_get_named_gpio_flags exited with status 205
  504. [ 1.794346] [c4] of_get_named_gpio_flags exited with status 204
  505. [ 1.794371] [c4] of_get_named_gpio_flags exited with status 27
  506. [ 1.794400] [c4] of_get_named_gpio_flags exited with status 205
  507. [ 1.794718] [c4] of_get_named_gpio_flags exited with status 204
  508. [ 1.794971] [c4] of_get_named_gpio_flags exited with status 27
  509. [ 1.795594] [c4] ledtrig-cpu: registered to indicate activity on CPUs
  510. [ 1.795684] [c4] S5P ACE Driver(SLIMSSS), (c) 2013 Samsung Electronics
  511. [ 1.796504] [c4] ACE: ecb-aes-s5p-ace
  512. [ 1.796828] [c4] ACE: cbc-aes-s5p-ace
  513. [ 1.797163] [c4] ACE: ctr-aes-s5p-ace
  514. [ 1.797466] [c4] ACE: xts-aes-s5p-ace
  515. [ 1.797830] [c4] ACE: sha1-s5p-ace
  516. [ 1.798185] [c5] ACE: sha256-s5p-ace
  517. [ 1.798219] [c5] ACE driver is initialized
  518. [ 1.798594] [c5] hidraw: raw HID events driver (C) Jiri Kosina
  519. [ 1.799025] [c5] usbcore: registered new interface driver usbhid
  520. [ 1.799062] [c5] usbhid: USB HID core driver
  521. [ 1.800040] [c5] exynos-adc 12d10000.adc: operating without regulator vdd[-19]
  522. [ 1.800636] [c5] exynos-adc 12d10000.adc: Probed successfully driver.
  523. [ 1.801569] [c5] odroid-fan odroid_fan.14: unable to request PWM, trying legacy API
  524. [ 1.801750] [c5] pwm-samsung: tin parent at 66600000
  525. [ 1.803908] [c5] of_get_named_gpio_flags exited with status 34
  526. [ 1.805801] [c5] lpass_register_subip: i2s(de346c10) registered
  527. [ 1.992911] [c6] usb 3-1: new high-speed USB device number 2 using xhci-hcd
  528. [ 1.997479] [c6] mmc0: BKOPS_EN bit is not set
  529. [ 2.016304] [c6] mmc_host mmc0: Bus speed (slot 0) = 166500000Hz (slot req 400000Hz, actual 398325HZ div = 209)
  530. [ 2.016403] [c6] mmc_host mmc0: Bus speed (slot 0) = 166500000Hz (slot req 166500000Hz, actual 166500000HZ div = 0)
  531. [ 2.016552] [c6] mmc_host mmc0: Bus speed (slot 0) = 333000000Hz (slot req 166500000Hz, actual 166500000HZ div = 1)
  532. [ 2.016639] [c6] mmc_host mmc0: Bus speed (slot 0) = 333000000Hz (slot req 200000000Hz, actual 166500000HZ div = 1)
  533. [ 2.017457] [c0] dwmmc_exynos 12200000.dwmmc0: End bit error
  534. [ 2.017636] [c6] mmc_host mmc0: Tuning error: cmd.error:0, data.error:-5
  535. [ 2.017794] [c0] dwmmc_exynos 12200000.dwmmc0: End bit error
  536. [ 2.017974] [c6] mmc_host mmc0: Tuning error: cmd.error:0, data.error:-5
  537. [ 2.018564] [c6] dwmmc_exynos 12200000.dwmmc0: sample_good: 0x cf best_sample: 0x 00
  538. [ 2.019482] [c6] mmc_host mmc0: Bus speed (slot 0) = 41625000Hz (slot req 200000000Hz, actual 41625000HZ div = 0)
  539. [ 2.019579] [c6] mmc_host mmc0: Bus speed (slot 0) = 41625000Hz (slot req 41625000Hz, actual 41625000HZ div = 0)
  540. [ 2.020921] [c6] mmc_host mmc0: Bus speed (slot 0) = 333000000Hz (slot req 41625000Hz, actual 41625000HZ div = 4)
  541. [ 2.021017] [c6] mmc_host mmc0: Bus speed (slot 0) = 333000000Hz (slot req 200000000Hz, actual 166500000HZ div = 1)
  542. [ 2.022018] [c6] mmc0: new HS200-DDR MMC card at address 0001
  543. [ 2.023366] [c6] mmcblk0: mmc0:0001 SDW32G 29.1 GiB
  544. [ 2.023941] [c6] mmcblk0boot0: mmc0:0001 SDW32G partition 1 4.00 MiB
  545. [ 2.024518] [c6] mmcblk0boot1: mmc0:0001 SDW32G partition 2 4.00 MiB
  546. [ 2.026725] [c6] mmcblk0: p1 p2
  547. [ 2.030071] [c6] mmcblk0boot1: unknown partition table
  548. [ 2.032327] [c6] mmcblk0boot0: unknown partition table
  549. [ 2.040267] [c7] hub 3-1:1.0: USB hub found
  550. [ 2.040770] [c7] hub 3-1:1.0: 2 ports detected
  551. [ 2.238258] [c7] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd
  552. [ 2.254413] [c7] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted.
  553. [ 2.264403] [c7] hub 4-1:1.0: USB hub found
  554. [ 2.264869] [c7] hub 4-1:1.0: 2 ports detected
  555. [ 2.373147] [c7] usb 6-1: new SuperSpeed USB device number 2 using xhci-hcd
  556. [ 2.388424] [c7] usb 6-1: Parent hub missing LPM exit latency info. Power management will be impacted.
  557. [ 2.624382] [c6] usb 4-1.1: new SuperSpeed USB device number 3 using xhci-hcd
  558. [ 2.639176] [c6] usb 4-1.1: Parent hub missing LPM exit latency info. Power management will be impacted.
  559. [ 2.643018] [c6] usb-storage 4-1.1:1.0: USB Mass Storage device detected
  560. [ 2.643698] [c7] scsi0 : usb-storage 4-1.1:1.0
  561. [ 2.802847] [c5] exynos5-hsi2c 12cb0000.hsi2c: Register dump(suspended : 0)
  562. : CTL 0x00000089
  563. : FIFO_CTL 0x00200203
  564. : TRAILING_CTL 0x0000000f
  565. : CLK_CTL 0x00000000
  566. : CLK_SLOT 0x00000000
  567. : INT_EN 0x00000000
  568. : INT_STAT 0x00000000
  569. : ERR_STAT 0x00000000
  570. : FIFO_STAT 0x01000002
  571. : TXDATA 0xdeadbeaf
  572. : RXDATA 0x00000000
  573. : CONF 0xb00300ff
  574. : AUTO_CONF 0x00020002
  575. : TIMEOUT 0x000000ff
  576. : MANUAL_CMD 0x00000000
  577. : TRANS_STAT 0x00000000
  578. : TIMING_HS1 0x4b4b4b00
  579. : TIMING_HS2 0x25004b4b
  580. : TIMING_HS3 0x00000096
  581. : TIMING_FS1 0x4b4b4b00
  582. : TIMING_FS2 0x25004b4b
  583. : TIMING_FS3 0x00000096
  584. : TIMING_SLA 0x00000025
  585. : ADDR 0x00004000
  586. [ 2.803215] [c5] exynos5-hsi2c 12cb0000.hsi2c: tx timeout
  587. [ 2.834382] [c7] usb 4-1.2: new SuperSpeed USB device number 4 using xhci-hcd
  588. [ 2.849263] [c7] usb 4-1.2: Parent hub missing LPM exit latency info. Power management will be impacted.
  589. [ 2.853260] [c7] usb-storage 4-1.2:1.0: USB Mass Storage device detected
  590. [ 2.853875] [c7] scsi1 : usb-storage 4-1.2:1.0
  591. [ 3.781842] [c7] scsi 0:0:0:0: Direct-Access SRT USB 3.0 JET 16G 1100 PQ: 0 ANSI: 6
  592. [ 3.783792] [c7] sd 0:0:0:0: Attached scsi generic sg0 type 0
  593. [ 3.784616] [c4] sd 0:0:0:0: [sda] 31457280 512-byte logical blocks: (16.1 GB/15.0 GiB)
  594. [ 3.785327] [c6] sd 0:0:0:0: [sda] Write Protect is off
  595. [ 3.785374] [c6] sd 0:0:0:0: [sda] Mode Sense: 22 00 00 00
  596. [ 3.785880] [c6] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
  597. [ 3.791386] [c7] sda: sda1
  598. [ 3.794746] [c7] sd 0:0:0:0: [sda] Attached SCSI removable disk
  599. [ 3.802859] [c5] exynos5-hsi2c 12cb0000.hsi2c: Register dump(suspended : 0)
  600. : CTL 0x00000089
  601. : FIFO_CTL 0x00200203
  602. : TRAILING_CTL 0x0000000f
  603. : CLK_CTL 0x00000000
  604. : CLK_SLOT 0x00000000
  605. : INT_EN 0x00000000
  606. : INT_STAT 0x00000000
  607. : ERR_STAT 0x00000000
  608. : FIFO_STAT 0x01000002
  609. : TXDATA 0xdeadbeaf
  610. : RXDATA 0x00000000
  611. : CONF 0xb00300ff
  612. : AUTO_CONF 0x00020002
  613. : TIMEOUT 0x000000ff
  614. : MANUAL_CMD 0x00000000
  615. : TRANS_STAT 0x00000000
  616. : TIMING_HS1 0x4b4b4b00
  617. : TIMING_HS2 0x25004b4b
  618. : TIMING_HS3 0x00000096
  619. : TIMING_FS1 0x4b4b4b00
  620. : TIMING_FS2 0x25004b4b
  621. : TIMING_FS3 0x00000096
  622. : TIMING_SLA 0x00000025
  623. : ADDR 0x00004000
  624. [ 3.803224] [c5] exynos5-hsi2c 12cb0000.hsi2c: tx timeout
  625. [ 3.803365] [c5] exynos5-hsi2c 12cb0000.hsi2c: xfer message failed
  626. [ 3.803433] [c5] max98090 1-0010: Failed to reset codec: -5
  627. [ 3.803475] [c5] max98090 1-0010: Failed to device reset : -5
  628. [ 3.803517] [c5] max98090 1-0010: ASoC: failed to probe CODEC -5
  629. [ 3.803784] [c5] odroid-audio sound.13: ASoC: failed to instantiate card -5
  630. [ 3.804152] [c5] odroid-audio sound.13: snd_soc_register_card() failed(max98090): -5
  631. [ 3.805147] [c5] dummy-codec dummy-codec.11: ASoC: Failed to create Capture debugfs file
  632. [ 3.805215] [c5] dummy-codec dummy-codec.11: ASoC: Failed to create Playback debugfs file
  633. [ 3.805280] [c5] dummy-codec dummy-codec.11: ASoC: Failed to create Capture debugfs file
  634. [ 3.805343] [c5] dummy-codec dummy-codec.11: ASoC: Failed to create Playback debugfs file
  635. [ 3.805406] [c5] dummy-codec dummy-codec.11: ASoC: Failed to create Capture debugfs file
  636. [ 3.805469] [c5] dummy-codec dummy-codec.11: ASoC: Failed to create Playback debugfs file
  637. [ 3.806134] [c5] odroid-audio sound.13: dummy-aif1 <-> samsung-i2s-sec mapping ok
  638. [ 3.807128] [c5] odroid-audio sound.13: dummy-aif2 <-> 3830000.i2s mapping ok
  639. [ 3.810386] [c5] Netfilter messages via NETLINK v0.30.
  640. [ 3.811135] [c5] arp_tables: (C) 2002 David S. Miller
  641. [ 3.811347] [c5] TCP: cubic registered
  642. [ 3.811385] [c5] Initializing XFRM netlink socket
  643. [ 3.812184] [c5] NET: Registered protocol family 10
  644. [ 3.814015] [c5] NET: Registered protocol family 17
  645. [ 3.814103] [c5] NET: Registered protocol family 15
  646. [ 3.814187] [c5] NET: Registered protocol family 35
  647. [ 3.814709] [c5] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
  648. [ 3.814829] [c5] Registering SWP/SWPB emulation handler
  649. [ 3.814871] [c5] SRAM ASV group [5] : MIF(925000), G3D(950000)
  650. [ 3.820511] [c5] registered taskstats version 1
  651. [ 3.820732] [c5] hdmi-en: disabling
  652. [ 3.820765] [c5] MAIN_DC: disabling
  653. [ 3.820799] [c5] regulator-dummy: disabling
  654. [ 3.821763] [c5] of_get_named_gpio_flags exited with status 11
  655. [ 3.821893] [c5] gpiod_set_debounce: gpio-11 status -22
  656. [ 3.822379] [c5] input: gpio_keys.7 as /devices/gpio_keys.7/input/input0
  657. [ 3.825021] [c5] s2m-rtc s2m-rtc: setting system clock to 2016-11-05 18:09:21 UTC (1478369361)
  658. [ 3.825076] [c5] CPUFREQ of CA7 L0 : 1300000 uV
  659. [ 3.825109] [c5] CPUFREQ of CA7 L0 : ABB 8
  660. [ 3.825139] [c5] CPUFREQ of CA7 L1 : 1287500 uV
  661. [ 3.825169] [c5] CPUFREQ of CA7 L1 : ABB 255
  662. [ 3.825199] [c5] CPUFREQ of CA7 L2 : 1212500 uV
  663. [ 3.825229] [c5] CPUFREQ of CA7 L2 : ABB 255
  664. [ 3.825258] [c5] CPUFREQ of CA7 L3 : 1162500 uV
  665. [ 3.825287] [c5] CPUFREQ of CA7 L3 : ABB 255
  666. [ 3.825316] [c5] CPUFREQ of CA7 L4 : 1112500 uV
  667. [ 3.825346] [c5] CPUFREQ of CA7 L4 : ABB 255
  668. [ 3.825375] [c5] CPUFREQ of CA7 L5 : 1075000 uV
  669. [ 3.825404] [c5] CPUFREQ of CA7 L5 : ABB 255
  670. [ 3.825433] [c5] CPUFREQ of CA7 L6 : 1037500 uV
  671. [ 3.825463] [c5] CPUFREQ of CA7 L6 : ABB 255
  672. [ 3.825491] [c5] CPUFREQ of CA7 L7 : 1000000 uV
  673. [ 3.825521] [c5] CPUFREQ of CA7 L7 : ABB 255
  674. [ 3.825550] [c5] CPUFREQ of CA7 L8 : 962500 uV
  675. [ 3.825579] [c5] CPUFREQ of CA7 L8 : ABB 255
  676. [ 3.825608] [c5] CPUFREQ of CA7 L9 : 925000 uV
  677. [ 3.825637] [c5] CPUFREQ of CA7 L9 : ABB 255
  678. [ 3.825666] [c5] CPUFREQ of CA7 L10 : 900000 uV
  679. [ 3.825696] [c5] CPUFREQ of CA7 L10 : ABB 255
  680. [ 3.825725] [c5] CPUFREQ of CA7 L11 : 900000 uV
  681. [ 3.825755] [c5] CPUFREQ of CA7 L11 : ABB 255
  682. [ 3.825784] [c5] CPUFREQ of CA7 L12 : 900000 uV
  683. [ 3.825814] [c5] CPUFREQ of CA7 L12 : ABB 255
  684. [ 3.825843] [c5] CPUFREQ of CA7 L13 : 900000 uV
  685. [ 3.825873] [c5] CPUFREQ of CA7 L13 : ABB 255
  686. [ 3.825902] [c5] CPUFREQ of CA7 L14 : 900000 uV
  687. [ 3.825932] [c5] CPUFREQ of CA7 L14 : ABB 255
  688. [ 3.826231] [c5] kfc clock[800000], mx_mspll clock[666000]
  689. [ 3.826275] [c5] [SET_EMA_TEST] volt : 887500 value : 0x44
  690. [ 3.826308] [c5] [SET_EMA_TEST] volt : 937500 value : 0x44
  691. [ 3.826341] [c5] [SET_EMA_TEST] volt : 1032500 value : 0x33
  692. [ 3.826373] [c5] [SET_EMA_TEST] volt : 1142500 value : 0x11
  693. [ 3.826406] [c5] [SET_EMA_TEST] volt : 1167500 value : 0x11
  694. [ 3.826440] [c5] CPUFREQ of CA15 L0 : 1362500 uV
  695. [ 3.826470] [c5] CPUFREQ of CA15 L0 : ABB 8
  696. [ 3.826499] [c5] CPUFREQ of CA15 L1 : 1362500 uV
  697. [ 3.826529] [c5] CPUFREQ of CA15 L1 : ABB 8
  698. [ 3.826558] [c5] CPUFREQ of CA15 L2 : 1362500 uV
  699. [ 3.826587] [c5] CPUFREQ of CA15 L2 : ABB 8
  700. [ 3.826615] [c5] CPUFREQ of CA15 L3 : 1312500 uV
  701. [ 3.826645] [c5] CPUFREQ of CA15 L3 : ABB 255
  702. [ 3.826674] [c5] CPUFREQ of CA15 L4 : 1262500 uV
  703. [ 3.826704] [c5] CPUFREQ of CA15 L4 : ABB 255
  704. [ 3.826732] [c5] CPUFREQ of CA15 L5 : 1187500 uV
  705. [ 3.826762] [c5] CPUFREQ of CA15 L5 : ABB 255
  706. [ 3.826791] [c5] CPUFREQ of CA15 L6 : 1137500 uV
  707. [ 3.826820] [c5] CPUFREQ of CA15 L6 : ABB 255
  708. [ 3.826849] [c5] CPUFREQ of CA15 L7 : 1100000 uV
  709. [ 3.826879] [c5] CPUFREQ of CA15 L7 : ABB 255
  710. [ 3.826908] [c5] CPUFREQ of CA15 L8 : 1062500 uV
  711. [ 3.826937] [c5] CPUFREQ of CA15 L8 : ABB 255
  712. [ 3.826966] [c5] CPUFREQ of CA15 L9 : 1025000 uV
  713. [ 3.826996] [c5] CPUFREQ of CA15 L9 : ABB 255
  714. [ 3.827025] [c5] CPUFREQ of CA15 L10 : 1000000 uV
  715. [ 3.827055] [c5] CPUFREQ of CA15 L10 : ABB 255
  716. [ 3.827084] [c5] CPUFREQ of CA15 L11 : 987500 uV
  717. [ 3.827113] [c5] CPUFREQ of CA15 L11 : ABB 255
  718. [ 3.827143] [c5] CPUFREQ of CA15 L12 : 962500 uV
  719. [ 3.827172] [c5] CPUFREQ of CA15 L12 : ABB 255
  720. [ 3.827202] [c5] CPUFREQ of CA15 L13 : 937500 uV
  721. [ 3.827231] [c5] CPUFREQ of CA15 L13 : ABB 255
  722. [ 3.827261] [c5] CPUFREQ of CA15 L14 : 912500 uV
  723. [ 3.827290] [c5] CPUFREQ of CA15 L14 : ABB 255
  724. [ 3.827319] [c5] CPUFREQ of CA15 L15 : 900000 uV
  725. [ 3.827349] [c5] CPUFREQ of CA15 L15 : ABB 255
  726. [ 3.827378] [c5] CPUFREQ of CA15 L16 : 900000 uV
  727. [ 3.827408] [c5] CPUFREQ of CA15 L16 : ABB 255
  728. [ 3.827437] [c5] CPUFREQ of CA15 L17 : 900000 uV
  729. [ 3.827467] [c5] CPUFREQ of CA15 L17 : ABB 255
  730. [ 3.827496] [c5] CPUFREQ of CA15 L18 : 900000 uV
  731. [ 3.827526] [c5] CPUFREQ of CA15 L18 : ABB 255
  732. [ 3.827555] [c5] CPUFREQ of CA15 L19 : 900000 uV
  733. [ 3.827585] [c5] CPUFREQ of CA15 L19 : ABB 255
  734. [ 3.827614] [c5] CPUFREQ of CA15 L20 : 900000 uV
  735. [ 3.827644] [c5] CPUFREQ of CA15 L20 : ABB 255
  736. [ 3.827673] [c5] CPUFREQ of CA15 L21 : 900000 uV
  737. [ 3.827703] [c5] CPUFREQ of CA15 L21 : ABB 255
  738. [ 3.827732] [c5] CPUFREQ of CA15 L22 : 900000 uV
  739. [ 3.827848] [c5] CPUFREQ of CA15 L22 : ABB 255
  740. [ 3.828192] [c5] eagle clock[800000], mpll clock[800000]
  741. [ 3.832553] [c6] Exynos: Kernel Thermal management registered
  742. [ 3.833072] [c5] ### dt-test ### No testcase data in device tree; not running tests
  743. [ 3.853592] [c7] scsi 1:0:0:0: Direct-Access INTEL SS DSC2BW120A4 1003 PQ: 0 ANSI: 6
  744. [ 3.854433] [c7] sd 1:0:0:0: Attached scsi generic sg1 type 0
  745. [ 3.854615] [c7] sd 1:0:0:0: [sdb] 234441632 512-byte logical blocks: (120 GB/111 GiB)
  746. [ 3.855391] [c7] sd 1:0:0:0: [sdb] Write Protect is off
  747. [ 3.855411] [c7] sd 1:0:0:0: [sdb] Mode Sense: 5f 00 10 08
  748. [ 3.856192] [c7] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
  749. [ 3.862951] [c7] sdb: unknown partition table
  750. [ 3.865377] [c7] sd 1:0:0:0: [sdb] Attached SCSI disk
  751. [ 3.871093] [c5] MIF 825000Khz ASV is 937500uV
  752. [ 3.871172] [c5] DEVFREQ(MIF) : 825000Khz, ABB 14
  753. [ 3.871188] [c5] MIF 728000Khz ASV is 900000uV
  754. [ 3.871204] [c5] DEVFREQ(MIF) : 728000Khz, ABB 14
  755. [ 3.871218] [c5] MIF 633000Khz ASV is 862500uV
  756. [ 3.871234] [c5] DEVFREQ(MIF) : 633000Khz, ABB 14
  757. [ 3.871247] [c5] MIF 543000Khz ASV is 837500uV
  758. [ 3.871263] [c5] DEVFREQ(MIF) : 543000Khz, ABB 14
  759. [ 3.871276] [c5] MIF 413000Khz ASV is 800000uV
  760. [ 3.871292] [c5] DEVFREQ(MIF) : 413000Khz, ABB 14
  761. [ 3.871305] [c5] MIF 275000Khz ASV is 787500uV
  762. [ 3.871321] [c5] DEVFREQ(MIF) : 275000Khz, ABB 14
  763. [ 3.871334] [c5] MIF 206000Khz ASV is 787500uV
  764. [ 3.871350] [c5] DEVFREQ(MIF) : 206000Khz, ABB 14
  765. [ 3.871364] [c5] MIF 165000Khz ASV is 787500uV
  766. [ 3.871379] [c5] DEVFREQ(MIF) : 165000Khz, ABB 14
  767. [ 3.871393] [c5] MIF 138000Khz ASV is 787500uV
  768. [ 3.871409] [c5] DEVFREQ(MIF) : 138000Khz, ABB 14
  769. [ 3.872711] [c5] MIF: set ASV freq 825000, voltage 937500
  770. [ 3.873333] [c5] INT 600000Khz ASV is 925000uV
  771. [ 3.873357] [c5] DEVFREQ(INT) : 600000Khz, ABB 255
  772. [ 4.872794] [c5] PM DOMAIN: Power off unused power domains.
  773. [ 4.873300] [c5] ALSA device list:
  774. [ 4.873350] [c5] #0: odroid-audio
  775. [ 4.873795] [c5] Freeing unused kernel memory: 424K (c08ad000 - c0917000)
  776. [ 4.908190] [c4] systemd-udevd[146]: starting version 215
  777. [ 5.867338] [c5] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  778. [ 6.024466] [c4] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
  779. [ 6.024742] [c4] systemd[1]: Detected architecture 'arm'.
  780. [ 6.032191] [c6] systemd[1]: Set hostname to <odroid>.
  781. [ 6.266373] [c4] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
  782. [ 6.267867] [c4] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
  783. [ 6.268193] [c4] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  784. [ 6.268237] [c4] systemd[1]: Starting Remote File Systems (Pre).
  785. [ 6.268683] [c4] systemd[1]: Reached target Remote File Systems (Pre).
  786. [ 6.268750] [c4] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
  787. [ 6.268988] [c4] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  788. [ 6.269027] [c4] systemd[1]: Starting Paths.
  789. [ 6.269329] [c4] systemd[1]: Reached target Paths.
  790. [ 6.269435] [c4] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
  791. [ 6.270233] [c4] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  792. [ 6.270286] [c4] systemd[1]: Starting Encrypted Volumes.
  793. [ 6.270597] [c4] systemd[1]: Reached target Encrypted Volumes.
  794. [ 6.270633] [c4] systemd[1]: Starting Swap.
  795. [ 6.270934] [c4] systemd[1]: Reached target Swap.
  796. [ 6.270970] [c4] systemd[1]: Expecting device dev-disk-by\x2duuid-96C3\x2d9298.device...
  797. [ 6.271260] [c4] systemd[1]: Expecting device dev-disk-by\x2duuid-63bc3e29\x2dc616\x2d43f4\x2da71e\x2d3465a9481c42.device...
  798. [ 6.271560] [c4] systemd[1]: Expecting device dev-disk-by\x2duuid-923cb99c\x2da4fd\x2d47e7\x2d99ca\x2deb260494eea7.device...
  799. [ 6.271858] [c4] systemd[1]: Starting Root Slice.
  800. [ 6.272260] [c4] systemd[1]: Created slice Root Slice.
  801. [ 6.272294] [c4] systemd[1]: Starting User and Session Slice.
  802. [ 6.273003] [c4] systemd[1]: Created slice User and Session Slice.
  803. [ 6.273041] [c4] systemd[1]: Starting Delayed Shutdown Socket.
  804. [ 6.273461] [c4] systemd[1]: Listening on Delayed Shutdown Socket.
  805. [ 6.273496] [c4] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
  806. [ 6.273965] [c4] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  807. [ 6.274004] [c4] systemd[1]: Starting Journal Socket (/dev/log).
  808. [ 6.274466] [c4] systemd[1]: Listening on Journal Socket (/dev/log).
  809. [ 6.274520] [c4] systemd[1]: Starting udev Control Socket.
  810. [ 6.274900] [c4] systemd[1]: Listening on udev Control Socket.
  811. [ 6.274950] [c4] systemd[1]: Starting udev Kernel Socket.
  812. [ 6.275310] [c4] systemd[1]: Listening on udev Kernel Socket.
  813. [ 6.275350] [c4] systemd[1]: Starting Journal Socket.
  814. [ 6.275805] [c4] systemd[1]: Listening on Journal Socket.
  815. [ 6.275860] [c4] systemd[1]: Starting System Slice.
  816. [ 6.276364] [c4] systemd[1]: Created slice System Slice.
  817. [ 6.276417] [c4] systemd[1]: Started File System Check on Root Device.
  818. [ 6.276451] [c4] systemd[1]: Starting system-systemd\x2dfsck.slice.
  819. [ 6.277012] [c4] systemd[1]: Created slice system-systemd\x2dfsck.slice.
  820. [ 6.277049] [c4] systemd[1]: Starting system-getty.slice.
  821. [ 6.277598] [c4] systemd[1]: Created slice system-getty.slice.
  822. [ 6.277728] [c4] systemd[1]: Starting Increase datagram queue length...
  823. [ 6.280861] [c4] systemd[1]: Starting Restore / save the current clock...
  824. [ 6.285545] [c4] systemd[1]: Starting Nameserver information manager...
  825. [ 6.289325] [c4] systemd[1]: Starting udev Coldplug all Devices...
  826. [ 6.293459] [c4] systemd[1]: Mounting Debug File System...
  827. [ 6.303037] [c7] systemd[1]: Starting Load Kernel Modules...
  828. [ 6.307250] [c7] systemd[1]: Mounting POSIX Message Queue File System...
  829. [ 6.313075] [c7] systemd[1]: Started Set Up Additional Binary Formats.
  830. [ 6.313325] [c7] systemd[1]: Mounted Huge Pages File System.
  831. [ 6.317680] [c5] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  832. [ 6.321563] [c6] systemd[1]: Starting LSB: Set keymap...
  833. [ 6.325305] [c6] systemd[1]: Starting Slices.
  834. [ 6.326419] [c6] systemd[1]: Reached target Slices.
  835. [ 6.330691] [c6] systemd[1]: Mounted POSIX Message Queue File System.
  836. [ 6.331156] [c6] systemd[1]: Mounted Debug File System.
  837. [ 6.333175] [c6] systemd[1]: Started Increase datagram queue length.
  838. [ 6.356279] [c7] systemd[1]: Started Restore / save the current clock.
  839. [ 6.364927] [c5] fuse init (API version 7.22)
  840. [ 6.368335] [c7] systemd[1]: Started Create list of required static device nodes for the current kernel.
  841. [ 6.370415] [c7] systemd[1]: Started LSB: Set keymap.
  842. [ 6.374450] [c6] of_get_named_gpio_flags exited with status 190
  843. [ 6.374468] [c6] of_get_named_gpio_flags exited with status 25
  844. [ 6.382257] [c7] systemd[1]: Started Nameserver information manager.
  845. [ 6.385147] [c6] of_get_named_gpio_flags exited with status 190
  846. [ 6.387766] [c7] systemd[1]: Time has been changed
  847. [ 6.394809] [c5] of_get_named_gpio_flags exited with status 25
  848. [ 6.395194] [c5] of_get_named_gpio_flags exited with status 174
  849. [ 6.395737] [c5] ads7846 spi1.1: touchscreen, irq 534
  850. [ 6.396773] [c4] input: ADS7846 Touchscreen as /devices/12d30000.spi/spi_master/spi1/spi1.1/input/input1
  851. [ 6.398314] [c4] PM DOMAIN: pd-isp, Device : 131a0000.spi Registered
  852. [ 6.398361] [c4] s3c64xx-spi 131a0000.spi: spi bus clock parent not specified, using clock at index 0 as parent
  853. [ 6.398391] [c4] s3c64xx-spi 131a0000.spi: number of chip select lines not specified, assuming 1 chip select line
  854. [ 6.398721] [c4] PM DOMAIN: pd-isp, Device : 131b0000.spi Registered
  855. [ 6.398787] [c4] s3c64xx-spi 131b0000.spi: spi bus clock parent not specified, using clock at index 0 as parent
  856. [ 6.398814] [c4] s3c64xx-spi 131b0000.spi: number of chip select lines not specified, assuming 1 chip select line
  857. [ 6.409677] [c6] fbtft_device: SPI devices registered:
  858. [ 6.409711] [c6] fbtft_device: spidev spi1.0 1000kHz 8 bits mode=0x00
  859. [ 6.409735] [c6] fbtft_device: ads7846 spi1.1 1000kHz 8 bits mode=0x00
  860. [ 6.409757] [c6] fbtft_device: 'fb' Platform devices registered:
  861. [ 6.409986] [c6] fbtft_device: Deleting spi1.0
  862. [ 6.412077] [c6] fbtft_device: GPIOS used by 'hktft9340':
  863. [ 6.412102] [c6] fbtft_device: 'reset' = GPIO21
  864. [ 6.412119] [c6] fbtft_device: 'dc' = GPIO22
  865. [ 6.412136] [c6] fbtft_device: 'led' = GPIO18
  866. [ 6.412152] [c6] fbtft_device: SPI devices registered:
  867. [ 6.412173] [c6] fbtft_device: ads7846 spi1.1 1000kHz 8 bits mode=0x00
  868. [ 6.412194] [c6] fbtft_device: fb_ili9340 spi1.0 40000kHz 8 bits mode=0x00
  869. [ 6.416777] [c7] systemd[1]: Started Load Kernel Modules.
  870. [ 6.454717] [c7] systemd[1]: Starting Apply Kernel Variables...
  871. [ 6.459097] [c7] systemd[1]: Mounting Configuration File System...
  872. [ 6.465034] [c6] systemd[1]: Mounting FUSE Control File System...
  873. [ 6.472875] [c6] systemd[1]: Starting Create Static Device Nodes in /dev...
  874. [ 6.477149] [c5] systemd[1]: Starting Syslog Socket.
  875. [ 6.477946] [c5] systemd[1]: Listening on Syslog Socket.
  876. [ 6.478109] [c5] systemd[1]: Starting Journal Service...
  877. [ 6.483760] [c6] systemd[1]: Started Journal Service.
  878. [ 6.545575] [c5] systemd-udevd[282]: starting version 215
  879. [ 6.834230] [c7] [d:0, c:0] s5p_mfc_open:1629: NORMAL instance is opened [0:1]
  880. [ 6.835401] [c7] [d:0] s5p_mfc_alloc_firmware:122: Port for DRM F/W : 0xafc00000
  881. [ 6.837597] [c5] [d:0] s5p_mfc_init_memctrl:304: [1] Base Address : 10000000
  882. [ 6.838267] [c5] [d:0] mfc_init_hw:426: MFC v8.0, F/W: 14yy, 01mm, 13dd (D)
  883. [ 6.838458] [c5] [d:0, c:0] s5p_mfc_open:1725: MFC open completed [0:1] dev = dd97a010, ctx = dd97c800
  884. [ 6.838785] [c5] [d:0, c:0] s5p_mfc_release:1883: MFC driver release is called [0:1], is_drm(0)
  885. [ 6.838947] [c5] s5p_mfc_dev_release:1801: power off
  886. [ 6.839713] [c5] [d:0] s5p_mfc_release:2037: mfc driver release finished [0:0], dev = dd97a010
  887. [ 6.839930] [c7] [d:0, c:0] s5p_mfc_open:1629: NORMAL instance is opened [0:1]
  888. [ 6.841292] [c7] [d:0] s5p_mfc_alloc_firmware:122: Port for DRM F/W : 0xafc00000
  889. [ 6.844211] [c7] [d:0] s5p_mfc_init_memctrl:304: [1] Base Address : 10000000
  890. [ 6.846450] [c7] [d:0] mfc_init_hw:426: MFC v8.0, F/W: 14yy, 01mm, 13dd (D)
  891. [ 6.846646] [c7] [d:0, c:0] s5p_mfc_open:1725: MFC open completed [0:1] dev = dd97a010, ctx = dd97d000
  892. [ 6.846917] [c7] [d:0, c:0] s5p_mfc_release:1883: MFC driver release is called [0:1], is_drm(0)
  893. [ 6.846967] [c7] s5p_mfc_dev_release:1801: power off
  894. [ 6.847493] [c7] [d:0] s5p_mfc_release:2037: mfc driver release finished [0:0], dev = dd97a010
  895. [ 6.876496] [c1] s3c-i2c 12c60000.i2c: slave address 0x00
  896. [ 6.923635] [c7] i2c-core: driver [INA231] using legacy suspend method
  897. [ 6.923684] [c7] i2c-core: driver [INA231] using legacy resume method
  898. [ 6.926825] [c2] INA231 3-0040: I2C write error: (-6) reg: 0x0
  899. [ 6.926876] [c2] INA231 3-0040: ============= Probe INA231 Fail! : sensor_arm (0xFFFFFFFA) =============
  900. [ 6.939880] [c1] INA231 3-0041: I2C write error: (-6) reg: 0x0
  901. [ 6.939923] [c1] INA231 3-0041: ============= Probe INA231 Fail! : sensor_mem (0xFFFFFFFA) =============
  902. [ 6.955365] [c7] INA231 3-0044: I2C write error: (-6) reg: 0x0
  903. [ 6.955403] [c7] INA231 3-0044: ============= Probe INA231 Fail! : sensor_g3d (0xFFFFFFFA) =============
  904. [ 6.961838] [c1] INA231 3-0045: I2C write error: (-6) reg: 0x0
  905. [ 6.961933] [c4] INA231 3-0045: ============= Probe INA231 Fail! : sensor_kfc (0xFFFFFFFA) =============
  906. [ 6.962007] [c4] s3c-i2c 12c60000.i2c: i2c-3: S3C I2C adapter
  907. [ 6.962246] [c4] s3c-i2c 12c70000.i2c: slave address 0x00
  908. [ 6.966112] [c5] s3c-i2c 12c70000.i2c: i2c-4: S3C I2C adapter
  909. [ 7.106722] [c7] EXT4-fs (mmcblk0p2): re-mounted. Opts: discard
  910. [ 7.271747] [c7] Console: switching to colour frame buffer device 40x30
  911. [ 7.272586] [c7] graphics fb0: fb_ili9340 frame buffer, 320x240, 150 KiB video memory, 4 KiB DMA buffer memory, fps=20, spi1.0 at 40 MHz
  912. [ 7.369032] [c6] usbcore: registered new interface driver r8152
  913. [ 7.534124] [c7] usb 6-1: reset SuperSpeed USB device number 2 using xhci-hcd
  914. [ 7.548258] [c7] usb 6-1: Parent hub missing LPM exit latency info. Power management will be impacted.
  915. [ 7.549365] [c7] xhci-hcd xhci-hcd.5.auto: xHCI xhci_drop_endpoint called with disabled ep dd9a80c0
  916. [ 7.550211] [c7] xhci-hcd xhci-hcd.5.auto: xHCI xhci_drop_endpoint called with disabled ep dd9a80ec
  917. [ 7.551029] [c7] xhci-hcd xhci-hcd.5.auto: xHCI xhci_drop_endpoint called with disabled ep dd9a8118
  918. [ 7.621348] [c7] r8152 6-1:1.0 eth0: v2.07.0 (2016/06/14)
  919. [ 7.621934] [c7] r8152 6-1:1.0 eth0: This product is covered by one or more of the following patents:
  920. US6,570,884, US6,115,776, and US6,327,625.
  921.  
  922. [ 7.642036] [c4] usbcore: registered new interface driver cdc_ether
  923. [ 7.878134] [c5] systemd-udevd[305]: renamed network interface eth0 to eth1
  924. [ 8.290649] [c5] EXT4-fs (sda1): mounting with "discard" option, but the device does not support discard
  925. [ 8.291504] [c5] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard
  926. [ 8.292214] [c7] sdb: unknown partition table
  927. [ 8.340711] [c7] EXT4-fs (sdb): mounting with "discard" option, but the device does not support discard
  928. [ 8.341533] [c7] EXT4-fs (sdb): mounted filesystem with ordered data mode. Opts: discard
  929. [ 8.566237] [c7] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
  930. [ 8.673967] [c6] Key type dns_resolver registered
  931. [ 8.691182] [c7] RPC: Registered named UNIX socket transport module.
  932. [ 8.691727] [c7] RPC: Registered udp transport module.
  933. [ 8.692234] [c7] RPC: Registered tcp transport module.
  934. [ 8.692715] [c7] RPC: Registered tcp NFSv4.1 backchannel transport module.
  935. [ 8.723207] [c7] NFS: Registering the id_resolver key type
  936. [ 8.723842] [c7] Key type id_resolver registered
  937. [ 8.724325] [c7] Key type id_legacy registered
  938. [ 8.938557] [c7] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  939. [ 11.149448] [c0] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
  940. [ 12.714356] [c4] systemd-journald[274]: Received request to flush runtime journal from PID 1
  941. [ 32.008853] [c7] Adding 2047456k swap on /home/john/.swapfile. Priority:-1 extents:135 across:11755516k SS
  942. root@odroid:~#
RAW Paste Data