SHARE
TWEET

Hikey960 Boot Log

a guest Sep 9th, 2019 7 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. hikey960 boarid:5301 xloader use UART6
  2. scsysstat_value[0].
  3. clear reset source
  4. last_keypoint0,reboot_type0
  5. secdbg not DCU.
  6. SecDbgVer exit
  7.  
  8.  xloader chipid is: 0x36600110, start at 532ms.
  9. Build Date: Dec  6 2017, 15:31:59
  10. [clock_init] ++
  11. hikey960 [hikey960_clk_init]
  12. hi3660 [clk_setup]
  13. [clock_init] --
  14. storage type is UFS
  15. ufs retry: 6 count v_tx:0 v_rx:0
  16. ufs set v_tx:0 v_rx:0
  17. Hikey960[5301] no need avs_init.
  18. ddr ft:0xf20332a3,mode:1 target:4
  19. UceLdOk
  20. ch 0 gt_errfail, STATUS:0x00000060
  21. ch 0 gdst_errfail, STATUS:0x00000040
  22. ch 1 gt_errfail, STATUS:0x00000060
  23. ch 1 gdst_errfail, STATUS:0x00000040
  24. ch 2 gt_errfail, STATUS:0x00000060
  25. ch 2 gdst_errfail, STATUS:0x00000040
  26. ch 3 gt_errfail, STATUS:0x00000060
  27. ch 3 gdst_errfail, STATUS:0x00000040
  28. timeout
  29. timeout
  30. timeout
  31. timeout
  32. density: 0x0c0c0c0c,0x00000000,0x0c0c0c0c,0x00000000,0x0c0c0c0c,0x00000000,0x0c0c0c0c,0x00000000
  33. ddr info 0x00000306
  34. 400M
  35. 685M
  36. 1067M
  37. C2R,V0x0000002d e:113
  38. C3R,V0x0000002c e:113
  39. C0R,V0x0000002d e:66
  40. C1R,V0x0000002c e:66
  41. C2R,V0x0000002e e:66
  42. C3R,V0x0000002d e:66
  43. C0R,V0x0000002e e:66
  44. C1R,V0x0000002d e:66
  45. C2R,V0x0000002f e:66
  46. C3R,V0x0000002e e:66
  47. C0R,V0x0000002f e:66
  48. C1R,V0x0000002e e:66
  49. C2R,V0x00000030 e:66
  50. C3R,V0x0000002f e:66
  51. C0R,V0x00000030 e:65
  52. C1R,V0x0000002f e:66
  53. C2R,V0x00000031 e:65
  54. C3R,V0x00000030 e:65
  55. 1244M
  56. 1866M
  57. C1R,V0x00000016 e:66
  58. C0R,V0x00000017 e:66
  59. C1R,V0x00000017 e:66
  60. C3R,V0x00000017 e:66
  61. iomcu_subsys_init
  62. boot_c0 PROFILE 4
  63. slave0 irq0:0x00000014
  64. NOTICE:  BL2: v2.0(release):v2.0-427-g72b3226f
  65. NOTICE:  BL2: Built : 11:21:36, Dec 19 2018
  66. NOTICE:  BL2: Booting BL31
  67. NOTICE:  BL31: v2.0(release):v2.0-427-g72b3226f
  68. NOTICE:  BL31: Built : 11:21:36, Dec 19 2018
  69. I/TC:  
  70. I/TC:  OP-TEE version: 3.0.0 #1 Wed Dec 19 11:21:34 UTC 2018 aarch64
  71. I/TC:  Initialized
  72. UEFI firmware (version Alpha built at 11:21:17 on Dec 19 2018)
  73. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll 0xBF18C000
  74. Loading DxeCore at 0x00BF18B000 EntryPoint=0x00BF18C000
  75. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll 0xBF18C000
  76. HOBLIST address in DXE = 0xBEF4D018
  77. Memory Allocation 0x00000004 0xBFFE8000 - 0xBFFE8FFF
  78. Memory Allocation 0x00000004 0xBFFE7000 - 0xBFFE7FFF
  79. Memory Allocation 0x00000004 0xBFFE6000 - 0xBFFE6FFF
  80. Memory Allocation 0x00000004 0xBFFE5000 - 0xBFFE5FFF
  81. Memory Allocation 0x00000004 0xBFFE9000 - 0xBFFFFFFF
  82. Memory Allocation 0x00000004 0xBFFD5000 - 0xBFFE4FFF
  83. Memory Allocation 0x00000004 0xBF8CF000 - 0xBFFD4FFF
  84. Memory Allocation 0x00000004 0xBF1C9000 - 0xBF8CEFFF
  85. Memory Allocation 0x00000004 0xBF18B000 - 0xBF1C8FFF
  86. Memory Allocation 0x00000003 0xBF18B000 - 0xBF1C8FFF
  87. FV Hob            0x1AC98000 - 0x1AD87FFF
  88. FV Hob            0xBF1C9000 - 0xBF8CDF3F
  89. FV2 Hob           0xBF1C9000 - 0xBF8CDF3F
  90. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/MdeModulePkg/Universal/PCD/Dxe/Pcd/DEBUG/PcdDxe.dll 0xBF0D1000
  91. Loading driver at 0x000BF0D0000 EntryPoint=0x000BF0D1048 PcdDxe.efi
  92. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/ArmPkg/Drivers/CpuDxe/CpuDxe/DEBUG/ArmCpuDxe.dll 0xBF0C1000
  93. Loading driver at 0x000BF0C0000 EntryPoint=0x000BF0C1048 ArmCpuDxe.efi
  94. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/MdeModulePkg/Core/RuntimeDxe/RuntimeDxe/DEBUG/RuntimeDxe.dll 0xBA0D0000
  95. Loading driver at 0x000BA0C0000 EntryPoint=0x000BA0D0048 RuntimeDxe.efi
  96. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe/DEBUG/SecurityStubDxe.dll 0xBF0B1000
  97. Loading driver at 0x000BF0B0000 EntryPoint=0x000BF0B1048 SecurityStubDxe.efi
  98. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter/DEBUG/EmbeddedMonotonicCounter.dll 0xBA030000
  99. Loading driver at 0x000BA020000 EntryPoint=0x000BA030048 EmbeddedMonotonicCounter.efi
  100. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe/DEBUG/Reset.dll 0xB9F90000
  101. Loading driver at 0x000B9F80000 EntryPoint=0x000B9F90048 Reset.efi
  102. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe/DEBUG/RealTimeClock.dll 0xB9EF0000
  103. Loading driver at 0x000B9EE0000 EntryPoint=0x000B9EF0048 RealTimeClock.efi
  104. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/EmbeddedPkg/MetronomeDxe/MetronomeDxe/DEBUG/MetronomeDxe.dll 0xBF0A9000
  105. Loading driver at 0x000BF0A8000 EntryPoint=0x000BF0A9048 MetronomeDxe.efi
  106. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/MdeModulePkg/Universal/SerialDxe/SerialDxe/DEBUG/SerialDxe.dll 0xBF0A1000
  107. Loading driver at 0x000BF0A0000 EntryPoint=0x000BF0A1048 SerialDxe.efi
  108. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/OpenPlatformPkg/Platforms/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe/DEBUG/HiKey960Gpio.dll 0xBF09A000
  109. Loading driver at 0x000BF099000 EntryPoint=0x000BF09A048 HiKey960Gpio.efi
  110. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe/DEBUG/PL061GpioDxe.dll 0xBF091000
  111. Loading driver at 0x000BF090000 EntryPoint=0x000BF091048 PL061GpioDxe.efi
  112. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/OpenPlatformPkg/Platforms/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe/DEBUG/HiKey960Dxe.dll 0xBF07C000
  113. Loading driver at 0x000BF07B000 EntryPoint=0x000BF07C048 HiKey960Dxe.efi
  114. [BDID]Adcin0:228
  115. [BDID]Adcin0Remap:1
  116. [BDID]Adcin1:0
  117. [BDID]Adcin1Remap:0
  118. [BDID]Adcin2:591
  119. [BDID]Adcin2Remap:3
  120. [BDID]boardid: 5301
  121. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/MdeModulePkg/Universal/Network/DpcDxe/DpcDxe/DEBUG/DpcDxe.dll 0xBF074000
  122. Loading driver at 0x000BF073000 EntryPoint=0x000BF074048 DpcDxe.efi
  123. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe/DEBUG/EmuVariableRuntimeDxe.dll 0xB9E50000
  124. Loading driver at 0x000B9E40000 EntryPoint=0x000B9E50048 EmuVariableRuntimeDxe.efi
  125. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe/DEBUG/HiiDatabase.dll 0xBF043000
  126. Loading driver at 0x000BF042000 EntryPoint=0x000BF043048 HiiDatabase.efi
  127. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe/DEBUG/DevicePathDxe.dll 0xBF02E000
  128. Loading driver at 0x000BF02D000 EntryPoint=0x000BF02E048 DevicePathDxe.efi
  129. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe/DEBUG/CapsuleRuntimeDxe.dll 0xB9DB0000
  130. Loading driver at 0x000B9DA0000 EntryPoint=0x000B9DB0048 CapsuleRuntimeDxe.efi
  131. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/ArmPkg/Drivers/ArmGic/ArmGicDxe/DEBUG/ArmGicDxe.dll 0xBF024000
  132. Loading driver at 0x000BF023000 EntryPoint=0x000BF024048 ArmGicDxe.efi
  133. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe/DEBUG/FaultTolerantWriteDxe.dll 0xBF015000
  134. Loading driver at 0x000BF014000 EntryPoint=0x000BF015048 FaultTolerantWriteDxe.efi
  135. Ftw: Workspace or Spare block does not exist!
  136. Error: Image at 000BF014000 start failed: Invalid Parameter
  137. remove-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe/DEBUG/FaultTolerantWriteDxe.dll 0xBF015000
  138. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe/DEBUG/SetupBrowser.dll 0xBEFF8000
  139. Loading driver at 0x000BEFF7000 EntryPoint=0x000BEFF8048 SetupBrowser.efi
  140. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/MdeModulePkg/Universal/BdsDxe/BdsDxe/DEBUG/BdsDxe.dll 0xBEFCD000
  141. Loading driver at 0x000BEFCC000 EntryPoint=0x000BEFCD048 BdsDxe.efi
  142. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/EmbeddedPkg/Drivers/DtPlatformDxe/DtPlatformDxe/DEBUG/DtPlatformDxe.dll 0xBEFC3000
  143. Loading driver at 0x000BEFC2000 EntryPoint=0x000BEFC3048 DtPlatformDxe.efi
  144. DtPlatformDxeEntryPoint: no DT/ACPI preference found, defaulting to DT
  145. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/ArmPkg/Drivers/TimerDxe/TimerDxe/DEBUG/ArmTimerDxe.dll 0xBEFBA000
  146. Loading driver at 0x000BEFB9000 EntryPoint=0x000BEFBA048 ArmTimerDxe.efi
  147. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe/DEBUG/DisplayEngine.dll 0xBEF97000
  148. Loading driver at 0x000BEF96000 EntryPoint=0x000BEF97048 DisplayEngine.efi
  149. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer/DEBUG/WatchdogTimer.dll 0xBEF8F000
  150. Loading driver at 0x000BEF8E000 EntryPoint=0x000BEF8F048 WatchdogTimer.efi
  151. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe/DEBUG/ConPlatformDxe.dll 0xBEF84000
  152. Loading driver at 0x000BEF83000 EntryPoint=0x000BEF84048 ConPlatformDxe.efi
  153. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe/DEBUG/TerminalDxe.dll 0xBEF71000
  154. Loading driver at 0x000BEF70000 EntryPoint=0x000BEF71048 TerminalDxe.efi
  155. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/OpenPlatformPkg/Drivers/Keyboard/VirtualKeyboardDxe/VirtualKeyboardDxe/DEBUG/VirtualKeyboardDxe.dll 0xBEF66000
  156. Loading driver at 0x000BEF65000 EntryPoint=0x000BEF66048 VirtualKeyboardDxe.efi
  157. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/OpenPlatformPkg/Platforms/Hisilicon/HiKey960/HiKey960MmcDxe/HiKey960MmcDxe/DEBUG/HiKey960MmcDxe.dll 0xBEF5D000
  158. Loading driver at 0x000BEF5C000 EntryPoint=0x000BEF5D048 HiKey960MmcDxe.efi
  159. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/MdeModulePkg/Bus/Pci/NonDiscoverablePciDeviceDxe/NonDiscoverablePciDeviceDxe/DEBUG/NonDiscoverablePciDeviceDxe.dll 0xB9D44000
  160. Loading driver at 0x000B9D43000 EntryPoint=0x000B9D44048 NonDiscoverablePciDeviceDxe.efi
  161. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/OpenPlatformPkg/Drivers/SdMmc/DwMmcHcDxe/DwMmcHcDxe/DEBUG/DwMmcHcDxe.dll 0xB9D30000
  162. Loading driver at 0x000B9D2F000 EntryPoint=0x000B9D30048 DwMmcHcDxe.efi
  163. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/MdeModulePkg/Bus/Sd/SdDxe/SdDxe/DEBUG/SdDxe.dll 0xB9D20000
  164. Loading driver at 0x000B9D1F000 EntryPoint=0x000B9D20048 SdDxe.efi
  165. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/MdeModulePkg/Universal/Network/MnpDxe/MnpDxe/DEBUG/MnpDxe.dll 0xB9D08000
  166. Loading driver at 0x000B9D07000 EntryPoint=0x000B9D08048 MnpDxe.efi
  167. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/MdeModulePkg/Universal/Network/ArpDxe/ArpDxe/DEBUG/ArpDxe.dll 0xB9CF8000
  168. Loading driver at 0x000B9CF7000 EntryPoint=0x000B9CF8048 ArpDxe.efi
  169. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe/DEBUG/Ip4Dxe.dll 0xB9CD1000
  170. Loading driver at 0x000B9CD0000 EntryPoint=0x000B9CD1048 Ip4Dxe.efi
  171. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe/DEBUG/Udp4Dxe.dll 0xB9CBC000
  172. Loading driver at 0x000B9CBB000 EntryPoint=0x000B9CBC048 Udp4Dxe.efi
  173. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe/DEBUG/Tcp4Dxe.dll 0xB9C9A000
  174. Loading driver at 0x000B9C99000 EntryPoint=0x000B9C9A048 Tcp4Dxe.efi
  175. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe/DEBUG/Dhcp4Dxe.dll 0xB9C84000
  176. Loading driver at 0x000B9C83000 EntryPoint=0x000B9C84048 Dhcp4Dxe.efi
  177. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe/DEBUG/Mtftp4Dxe.dll 0xB9C6E000
  178. Loading driver at 0x000B9C6D000 EntryPoint=0x000B9C6E048 Mtftp4Dxe.efi
  179. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe/DEBUG/UefiPxe4BcDxe.dll 0xB9C57000
  180. Loading driver at 0x000B9C56000 EntryPoint=0x000B9C57048 UefiPxe4BcDxe.efi
  181. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/OptionRomPkg/Bus/Usb/UsbNetworking/Ax88772b/Ax88772b/DEBUG/Ax88772b.dll 0xB9C10000
  182. Loading driver at 0x000B9C00000 EntryPoint=0x000B9C10048 Ax88772b.efi
  183. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/OpenPlatformPkg/Drivers/Block/DwUfsHcDxe/DwUfsHcDxe/DEBUG/DwUfsHcDxe.dll 0xB9BA4000
  184. Loading driver at 0x000B9BA3000 EntryPoint=0x000B9BA4048 DwUfsHcDxe.efi
  185. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruDxe/DEBUG/UfsPassThruDxe.dll 0xB9B92000
  186. Loading driver at 0x000B9B91000 EntryPoint=0x000B9B92048 UfsPassThruDxe.efi
  187. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe/DEBUG/ScsiBus.dll 0xB9B85000
  188. Loading driver at 0x000B9B84000 EntryPoint=0x000B9B85048 ScsiBus.efi
  189. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe/DEBUG/ScsiDisk.dll 0xB9B6F000
  190. Loading driver at 0x000B9B6E000 EntryPoint=0x000B9B6F048 ScsiDisk.efi
  191. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe/DEBUG/DiskIoDxe.dll 0xB9B62000
  192. Loading driver at 0x000B9B61000 EntryPoint=0x000B9B62048 DiskIoDxe.efi
  193. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe/DEBUG/PartitionDxe.dll 0xB9B53000
  194. Loading driver at 0x000B9B52000 EntryPoint=0x000B9B53048 PartitionDxe.efi
  195. add-symbol-file /work/jenkins/workspace/ap-uefi-bin/EDK2_ARCH/ARM/EDK2_BINARY/FatPkg/label/sas-sw/Build/Fat/RELEASE_GCC49/AARCH64/FatPkg/EnhancedFatDxe/Fat/DEBUG/Fat.dll 0xBEF55260
  196. Loading driver at 0x000BEF55000 EntryPoint=0x000BEF552A8 Fat.efi
  197. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe/DEBUG/EnglishDxe.dll 0xBA115000
  198. Loading driver at 0x000BA114000 EntryPoint=0x000BA115048 EnglishDxe.efi
  199. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe/DEBUG/UsbBusDxe.dll 0xB9B3E000
  200. Loading driver at 0x000B9B3D000 EntryPoint=0x000B9B3E048 UsbBusDxe.efi
  201. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe/DEBUG/UsbMassStorageDxe.dll 0xB9B2F000
  202. Loading driver at 0x000B9B2E000 EntryPoint=0x000B9B2F048 UsbMassStorageDxe.efi
  203. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/OpenPlatformPkg/Platforms/Hisilicon/HiKey960/HiKey960UsbDxe/HiKey960UsbDxe/DEBUG/HiKey960UsbDxe.dll 0xB9B1D000
  204. Loading driver at 0x000B9B1C000 EntryPoint=0x000B9B1D048 HiKey960UsbDxe.efi
  205. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/OpenPlatformPkg/Platforms/Hisilicon/HiKey960/HiKey960FastbootDxe/HiKey960FastbootDxe/DEBUG/HiKey960FastbootDxe.dll 0xB9B08000
  206. Loading driver at 0x000B9B07000 EntryPoint=0x000B9B08048 HiKey960FastbootDxe.efi
  207. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/OpenPlatformPkg/Drivers/Usb/DwUsb3Dxe/DwUsb3Dxe/DEBUG/DwUsb3Dxe.dll 0xB9AF9000
  208. Loading driver at 0x000B9AF8000 EntryPoint=0x000B9AF9048 DwUsb3Dxe.efi
  209. add-symbol-file /home/buildslave/workspace/96boards-reference-uefi-staging/84/edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/EmbeddedPkg/Drivers/AndroidFastbootTransportUsbDxe/FastbootTransportUsbDxe/DEBUG/FastbootTransportUsbDxe.dll 0xB9AF1000
  210. Loading driver at 0x000B9AF0000 EntryPoint=0x000B9AF1048 FastbootTransportUsbDxe.efi
  211. 3h3h3h3hPress ESCAPE for boot options UfsExecScsiCmds() fails with Target Failure
  212. UfsExecScsiCmds() fails with Target Failure
  213. UfsExecScsiCmds() fails with Target Failure
  214. UfsExecScsiCmds() fails with Target Failure
  215. .[Bds]Booting Boot from SD
  216. [Bds]Booting Grub
  217. Loading driver at 0x000B9A44000 EntryPoint=0x000B9A44400
  218. Loading driver at 0x000B9A44000 EntryPoint=0x000B9A44400
  219. GNU GRUB  version 2.02~beta3-5+deb9u1
  220.  
  221. /----------------------------------------------------------------------------\||||||||||||||||||||||||\----------------------------------------------------------------------------/     Use the ^ and v keys to select which entry is highlighted.          
  222.       Press enter to boot the selected OS, `e' to edit the commands      
  223.       before booting or `c' for a command-line. ESC to return previous    
  224.       menu.                                                                
  225. *Debian 9.0 (Stretch)                                                        Fastboot                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            
  226.    The highlighted entry will be executed automatically in 10s.                                                                                                                                                                              GNU GRUB  version 2.02~beta3-5+deb9u1
  227.  
  228. /----------------------------------------------------------------------------\||||||||||||||||||||||||||\----------------------------------------------------------------------------/     Minimum Emacs-like screen editing is supported. TAB lists          
  229.       completions. Press Ctrl-x or F10 to boot, Ctrl-c or F2 for a        
  230.       command-line or ESC to discard edits and return to the GRUB menu.   setparams 'Debian 9.0 (Stretch)'                                                                                                                            linux /boot/Image console=tty0 console=ttyAMA6,115200n8 root=/dev/sdd10\
  231.  rootwait rw efi=noruntime                                                      devicetree /boot/hi3660-hikey960.dtb                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    
  232.  
  233. GNU GRUB  version 2.02~beta3-5+deb9u1
  234.  
  235. /----------------------------------------------------------------------------\||||||||||||||||||||||||\----------------------------------------------------------------------------/     Use the ^ and v keys to select which entry is highlighted.          
  236.       Press enter to boot the selected OS, `e' to edit the commands      
  237.       before booting or `c' for a command-line. ESC to return previous    
  238.       menu.                                                                
  239. *Debian 9.0 (Stretch)                                                        Fastboot                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            
  240.                                                                                                                                                               Loading driver at 0x000B77FD000 EntryPoint=0x000B86A150C
  241. Loading driver at 0x000B77FD000 EntryPoint=0x000B86A150C
  242. EFI stub: Booting Linux Kernel...
  243. EFI stub: Using DTB from configuration table
  244. EFI stub: Exiting boot services and installing virtual address map...
  245. I/TC:  Dynamic shared memory is enabled
  246. [    0.000000] Booting Linux on physical CPU 0x0
  247. [    0.000000] Linux version 4.14.0-rc7-linaro-hikey960+ (bas@hikey960) (gcc version 6.3.0 20170516 (Debian 6.3.0-18)) #8 SMP PREEMPT Thu Mar 8 11:34:37 UTC 2018
  248. [    0.000000] Boot CPU: AArch64 Processor [410fd034]
  249. [    0.000000] Machine model: HiKey960
  250. [    0.000000] efi: Getting EFI parameters from FDT:
  251. [    0.000000] efi: EFI v2.60 by EDK II
  252. [    0.000000] efi:  MEMATTR=0xbde6c018
  253. [    0.000000] cma: Reserved 16 MiB at 0x00000000be000000
  254. [    0.000000] NUMA: No NUMA configuration found
  255. [    0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000bfffffff]
  256. [    0.000000] NUMA: NODE_DATA [mem 0xbffa7f00-0xbffa99ff]
  257. [    0.000000] Zone ranges:
  258. [    0.000000]   DMA      [mem 0x0000000000000000-0x00000000bfffffff]
  259. [    0.000000]   Normal   empty
  260. [    0.000000] Movable zone start for each node
  261. [    0.000000] Early memory node ranges
  262. [    0.000000]   node   0: [mem 0x0000000000000000-0x000000001abfffff]
  263. [    0.000000]   node   0: [mem 0x000000001ad88000-0x0000000031ffffff]
  264. [    0.000000]   node   0: [mem 0x0000000032101000-0x000000003dffffff]
  265. [    0.000000]   node   0: [mem 0x0000000040000000-0x0000000089b7ffff]
  266. [    0.000000]   node   0: [mem 0x0000000089cc0000-0x00000000b9baffff]
  267. [    0.000000]   node   0: [mem 0x00000000b9bb0000-0x00000000b9c4ffff]
  268. [    0.000000]   node   0: [mem 0x00000000b9c50000-0x00000000b9d4ffff]
  269. [    0.000000]   node   0: [mem 0x00000000b9d50000-0x00000000ba113fff]
  270. [    0.000000]   node   0: [mem 0x00000000ba114000-0x00000000bf0dffff]
  271. [    0.000000]   node   0: [mem 0x00000000bf0e0000-0x00000000bf11ffff]
  272. [    0.000000]   node   0: [mem 0x00000000bf120000-0x00000000bf12ffff]
  273. [    0.000000]   node   0: [mem 0x00000000bf130000-0x00000000bf17ffff]
  274. [    0.000000]   node   0: [mem 0x00000000bf180000-0x00000000bfffffff]
  275. [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000bfffffff]
  276. [    0.000000] psci: probing for conduit method from DT.
  277. [    0.000000] psci: PSCIv1.1 detected in firmware.
  278. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  279. [    0.000000] psci: Trusted OS migration not required
  280. [    0.000000] random: fast init done
  281. [    0.000000] percpu: Embedded 23 pages/cpu @ffff8000bfeec000 s55448 r8192 d30568 u94208
  282. [    0.000000] Detected VIPT I-cache on CPU0
  283. [    0.000000] CPU features: enabling workaround for ARM erratum 845719
  284. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 764983
  285. [    0.000000] Policy zone: DMA
  286. [    0.000000] Kernel command line: BOOT_IMAGE=/boot/Image console=tty0 console=ttyAMA6,115200n8 root=/dev/sdd10 rootwait rw efi=noruntime
  287. [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  288. [    0.000000] Memory: 3017548K/3109084K available (10236K kernel code, 1180K rwdata, 4684K rodata, 1152K init, 405K bss, 75152K reserved, 16384K cma-reserved)
  289. [    0.000000] Virtual kernel memory layout:
  290. [    0.000000]     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
  291. [    0.000000]     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
  292. [    0.000000]       .text : 0xffff000008080000 - 0xffff000008a80000   ( 10240 KB)
  293. [    0.000000]     .rodata : 0xffff000008a80000 - 0xffff000008f20000   (  4736 KB)
  294. [    0.000000]       .init : 0xffff000008f20000 - 0xffff000009040000   (  1152 KB)
  295. [    0.000000]       .data : 0xffff000009040000 - 0xffff000009167200   (  1181 KB)
  296. [    0.000000]        .bss : 0xffff000009167200 - 0xffff0000091cc960   (   406 KB)
  297. [    0.000000]     fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
  298. [    0.000000]     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
  299. [    0.000000]     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
  300. [    0.000000]               0xffff7e0000000000 - 0xffff7e0003000000   (    48 MB actual)
  301. [    0.000000]     memory  : 0xffff800000000000 - 0xffff8000c0000000   (  3072 MB)
  302. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  303. [    0.000000] Preemptible hierarchical RCU implementation.
  304. [    0.000000]  RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
  305. [    0.000000]  Tasks RCU enabled.
  306. [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
  307. [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  308. [    0.000000] GIC: Using split EOI/Deactivate mode
  309. [    0.000000] arch_timer: cp15 timer(s) running at 1.92MHz (phys).
  310. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1c570327e, max_idle_ns: 1763180809505 ns
  311. [    0.000004] sched_clock: 56 bits at 1920kHz, resolution 520ns, wraps every 4398046510977ns
  312. [    0.000097] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58334160866034 ns
  313. [    0.000594] Console: colour dummy device 80x25
  314. [    0.000977] console [tty0] enabled
  315. [    0.001071] Calibrating delay loop (skipped), value calculated using timer frequency.. 3.84 BogoMIPS (lpj=7680)
  316. [    0.001087] pid_max: default: 32768 minimum: 301
  317. [    0.001158] Security Framework initialized
  318. [    0.002392] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
  319. [    0.002999] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
  320. [    0.003039] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
  321. [    0.003065] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
  322. [    0.020068] ASID allocator initialised with 65536 entries
  323. [    0.028046] Hierarchical SRCU implementation.
  324. [    0.037223] EFI runtime services will be disabled.
  325. [    0.044077] smp: Bringing up secondary CPUs ...
  326. [    0.072464] Detected VIPT I-cache on CPU1
  327. [    0.072551] CPU1: Booted secondary processor [410fd034]
  328. [    0.100425] Detected VIPT I-cache on CPU2
  329. [    0.100447] CPU2: Booted secondary processor [410fd034]
  330. [    0.128436] Detected VIPT I-cache on CPU3
  331. [    0.128454] CPU3: Booted secondary processor [410fd034]
  332. [    0.158031] CPU features: enabling workaround for ARM erratum 858921
  333. [    0.158035] Detected VIPT I-cache on CPU4
  334. [    0.158042] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU4: 0x00000000101122
  335. [    0.158048] CPU features: Unsupported CPU feature variation detected.
  336. [    0.158152] arch_timer: Enabling local workaround for ARM erratum 858921
  337. [    0.158160] arch_timer: CPU4: Trapping CNTVCT access
  338. [    0.158164] CPU4: Booted secondary processor [410fd091]
  339. [    0.184439] Detected VIPT I-cache on CPU5
  340. [    0.184444] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU5: 0x00000000101122
  341. [    0.184454] arch_timer: Enabling local workaround for ARM erratum 858921
  342. [    0.184458] arch_timer: CPU5: Trapping CNTVCT access
  343. [    0.184461] CPU5: Booted secondary processor [410fd091]
  344. [    0.212468] Detected VIPT I-cache on CPU6
  345. [    0.212472] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU6: 0x00000000101122
  346. [    0.212481] arch_timer: Enabling local workaround for ARM erratum 858921
  347. [    0.212486] arch_timer: CPU6: Trapping CNTVCT access
  348. [    0.212489] CPU6: Booted secondary processor [410fd091]
  349. [    0.240494] Detected VIPT I-cache on CPU7
  350. [    0.240499] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU7: 0x00000000101122
  351. [    0.240508] arch_timer: Enabling local workaround for ARM erratum 858921
  352. [    0.240513] arch_timer: CPU7: Trapping CNTVCT access
  353. [    0.240516] CPU7: Booted secondary processor [410fd091]
  354. [    0.240566] smp: Brought up 1 node, 8 CPUs
  355. [    0.240738] SMP: Total of 8 processors activated.
  356. [    0.240745] CPU features: detected feature: 32-bit EL0 Support
  357. [    0.240928] CPU: All CPU(s) started at EL2
  358. [    0.240961] alternatives: patching kernel code
  359. [    0.241736] devtmpfs: initialized
  360. [    0.246829] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  361. [    0.246906] futex hash table entries: 2048 (order: 6, 262144 bytes)
  362. [    0.247425] pinctrl core: initialized pinctrl subsystem
  363. [    0.248717] DMI not present or invalid.
  364. [    0.249031] NET: Registered protocol family 16
  365. [    0.250422] cpuidle: using governor menu
  366. [    0.251132] vdso: 2 pages (1 code @ ffff000008a86000, 1 data @ ffff000009045000)
  367. [    0.251157] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  368. [    0.251976] DMA: preallocated 256 KiB pool for atomic allocations
  369. [    0.252257] Serial: AMBA PL011 UART driver
  370. [    0.273333] hi3660-mbox e896b000.mailbox: Mailbox enabled
  371. [    0.274092] uart-pl011 ffd74000.serial: could not find pctldev for node /soc/pinmux@e896c000/uart3_pmx_func, deferring probe
  372. [    0.274221] uart-pl011 fdf01000.serial: could not find pctldev for node /soc/pinmux@e896c000/uart4_pmx_func, deferring probe
  373. [    0.274335] uart-pl011 fff32000.serial: could not find pctldev for node /soc/pinmux@e896c000/uart6_pmx_func, deferring probe
  374. [    0.286855] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  375. [    0.287690] ACPI: Interpreter disabled.
  376. [    0.289030] vgaarb: loaded
  377. [    0.289247] SCSI subsystem initialized
  378. [    0.289495] ssp-pl022 ffd68000.spi: could not find pctldev for node /soc/pinmux@fff11000/spi2_pmx_func, deferring probe
  379. [    0.289529] ssp-pl022 ff3b3000.spi: could not find pctldev for node /soc/pinmux@ff3b6000/spi3_pmx_func, deferring probe
  380. [    0.289719] usbcore: registered new interface driver usbfs
  381. [    0.289752] usbcore: registered new interface driver hub
  382. [    0.289818] usbcore: registered new device driver usb
  383. [    0.289993] tcpc_class_init_1.1.1_G
  384. [    0.290008] TCPC class init OK
  385. [    0.290019] Init Richtek RegMap
  386. [    0.290153] i2c_designware ffd71000.i2c: could not find pctldev for node /soc/pinmux@fff11000/i2c0_pmx_func, deferring probe
  387. [    0.290186] i2c_designware ffd72000.i2c: could not find pctldev for node /soc/pinmux@fff11000/i2c1_pmx_func, deferring probe
  388. [    0.290218] i2c_designware fdf0b000.i2c: could not find pctldev for node /soc/pinmux@fff11000/i2c7_pmx_func, deferring probe
  389. [    0.290581] pps_core: LinuxPPS API ver. 1 registered
  390. [    0.290589] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  391. [    0.290608] PTP clock support registered
  392. [    0.290697] EDAC MC: Ver: 3.0.0
  393. [    0.290886] dmi: Firmware registration failed.
  394. [    0.291052] Registered efivars operations
  395. [    0.291290] Advanced Linux Sound Architecture Driver Initialized.
  396. [    0.291890] clocksource: Switched to clocksource arch_sys_counter
  397. [    0.292042] VFS: Disk quotas dquot_6.6.0
  398. [    0.292089] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  399. [    0.292210] pnp: PnP ACPI: disabled
  400. [    0.295841] NET: Registered protocol family 2
  401. [    0.296355] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
  402. [    0.296555] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
  403. [    0.296968] TCP: Hash tables configured (established 32768 bind 32768)
  404. [    0.297097] UDP hash table entries: 2048 (order: 4, 65536 bytes)
  405. [    0.297165] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
  406. [    0.297355] NET: Registered protocol family 1
  407. [    0.297642] RPC: Registered named UNIX socket transport module.
  408. [    0.297652] RPC: Registered udp transport module.
  409. [    0.297658] RPC: Registered tcp transport module.
  410. [    0.297665] RPC: Registered tcp NFSv4.1 backchannel transport module.
  411. [    0.298642] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  412. [    0.298906] kvm [1]: 8-bit VMID
  413. [    0.298913] kvm [1]: IDMAP page: a71000
  414. [    0.298919] kvm [1]: HYP VA range: 800000000000:ffffffffffff
  415. [    0.299563] kvm [1]: Hyp mode initialized successfully
  416. [    0.299753] kvm [1]: vgic-v2@e82b4000
  417. [    0.299843] kvm [1]: vgic interrupt IRQ1
  418. [    0.299858] kvm [1]: virtual timer IRQ4
  419. [    0.302232] audit: initializing netlink subsys (disabled)
  420. [    0.302343] audit: type=2000 audit(0.295:1): state=initialized audit_enabled=0 res=1
  421. [    0.302596] workingset: timestamp_bits=44 max_order=20 bucket_order=0
  422. [    0.306225] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  423. [    0.306643] NFS: Registering the id_resolver key type
  424. [    0.306680] Key type id_resolver registered
  425. [    0.306686] Key type id_legacy registered
  426. [    0.306698] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  427. [    0.306857] 9p: Installing v9fs 9p2000 file system support
  428. [    0.308682] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  429. [    0.308710] io scheduler noop registered
  430. [    0.308823] io scheduler cfq registered (default)
  431. [    0.308833] io scheduler mq-deadline registered
  432. [    0.308839] io scheduler kyber registered
  433. [    0.310931] pinctrl-single e896c000.pinmux: 124 pins at pa ffff0000099d5000 size 496
  434. [    0.311243] pinctrl-single ff37e000.pinmux: 6 pins at pa ffff0000099dd000 size 24
  435. [    0.311372] pinctrl-single ff3b6000.pinmux: 12 pins at pa ffff0000099e5000 size 48
  436. [    0.311457] pinctrl-single ff3fd000.pinmux: 6 pins at pa ffff0000099ed000 size 24
  437. [    0.311579] pinctrl-single fff11000.pinmux: 42 pins at pa ffff0000099f5000 size 168
  438. [    0.311793] pinctrl-single e896c800.pinmux: 128 pins at pa ffff0000099fd800 size 512
  439. [    0.312041] pinctrl-single ff3b6800.pinmux: 6 pins at pa ffff000009a05800 size 24
  440. [    0.312146] pinctrl-single ff3fd800.pinmux: 6 pins at pa ffff000009a0d800 size 24
  441. [    0.312246] pinctrl-single ff37e800.pinmux: 6 pins at pa ffff000009a15800 size 24
  442. [    0.312432] pinctrl-single fff11800.pinmux: 47 pins at pa ffff000009a1d800 size 188
  443. [    0.313849] pl061_gpio e8a0b000.gpio: PL061 GPIO chip @0x00000000e8a0b000 registered
  444. [    0.314086] pl061_gpio e8a0c000.gpio: PL061 GPIO chip @0x00000000e8a0c000 registered
  445. [    0.314244] pl061_gpio e8a0d000.gpio: PL061 GPIO chip @0x00000000e8a0d000 registered
  446. [    0.314379] pl061_gpio e8a0e000.gpio: PL061 GPIO chip @0x00000000e8a0e000 registered
  447. [    0.314506] pl061_gpio e8a0f000.gpio: PL061 GPIO chip @0x00000000e8a0f000 registered
  448. [    0.314635] pl061_gpio e8a10000.gpio: PL061 GPIO chip @0x00000000e8a10000 registered
  449. [    0.314776] pl061_gpio e8a11000.gpio: PL061 GPIO chip @0x00000000e8a11000 registered
  450. [    0.314909] pl061_gpio e8a12000.gpio: PL061 GPIO chip @0x00000000e8a12000 registered
  451. [    0.315039] pl061_gpio e8a13000.gpio: PL061 GPIO chip @0x00000000e8a13000 registered
  452. [    0.315171] pl061_gpio e8a14000.gpio: PL061 GPIO chip @0x00000000e8a14000 registered
  453. [    0.315292] pl061_gpio e8a15000.gpio: PL061 GPIO chip @0x00000000e8a15000 registered
  454. [    0.315419] pl061_gpio e8a16000.gpio: PL061 GPIO chip @0x00000000e8a16000 registered
  455. [    0.315553] pl061_gpio e8a17000.gpio: PL061 GPIO chip @0x00000000e8a17000 registered
  456. [    0.315684] pl061_gpio e8a18000.gpio: PL061 GPIO chip @0x00000000e8a18000 registered
  457. [    0.315820] pl061_gpio e8a19000.gpio: PL061 GPIO chip @0x00000000e8a19000 registered
  458. [    0.315992] pl061_gpio e8a1a000.gpio: PL061 GPIO chip @0x00000000e8a1a000 registered
  459. [    0.316146] pl061_gpio e8a1b000.gpio: PL061 GPIO chip @0x00000000e8a1b000 registered
  460. [    0.316291] pl061_gpio e8a1c000.gpio: PL061 GPIO chip @0x00000000e8a1c000 registered
  461. [    0.316472] pl061_gpio ff3b4000.gpio: PL061 GPIO chip @0x00000000ff3b4000 registered
  462. [    0.316623] pl061_gpio ff3b5000.gpio: PL061 GPIO chip @0x00000000ff3b5000 registered
  463. [    0.316751] pl061_gpio e8a1f000.gpio: PL061 GPIO chip @0x00000000e8a1f000 registered
  464. [    0.316886] pl061_gpio e8a20000.gpio: PL061 GPIO chip @0x00000000e8a20000 registered
  465. [    0.317025] pl061_gpio fff0b000.gpio: PL061 GPIO chip @0x00000000fff0b000 registered
  466. [    0.317173] pl061_gpio fff0c000.gpio: PL061 GPIO chip @0x00000000fff0c000 registered
  467. [    0.317313] pl061_gpio fff0d000.gpio: PL061 GPIO chip @0x00000000fff0d000 registered
  468. [    0.317464] pl061_gpio fff0e000.gpio: PL061 GPIO chip @0x00000000fff0e000 registered
  469. [    0.317599] pl061_gpio fff0f000.gpio: PL061 GPIO chip @0x00000000fff0f000 registered
  470. [    0.317748] pl061_gpio fff10000.gpio: PL061 GPIO chip @0x00000000fff10000 registered
  471. [    0.317887] pl061_gpio fff1d000.gpio: PL061 GPIO chip @0x00000000fff1d000 registered
  472. [    0.322524] k3-dma fdf30000.dma: initialized
  473. [    0.326394] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  474. [    0.327960] SuperH (H)SCI(F) driver initialized
  475. [    0.328218] msm_serial: driver initialized
  476. [    0.329241] [drm] +.
  477. [    0.329266] [drm] wait for external HDMI bridge driver.
  478. [    0.334341] loop: module loaded
  479. [    0.334740] [I/GPIO_HUB] gpio_hub_probe: step in
  480. [    0.334953] [I/GPIO_HUB] gpio_hub_init:gpio hub init status:0
  481. [    0.337215] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
  482. [    0.337247] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vcc-supply regulator, assuming enabled
  483. [    0.337260] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
  484. [    0.337272] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled
  485. [    0.359237] scsi host0: ufshcd
  486. [    0.370036] libphy: Fixed MDIO Bus: probed
  487. [    0.370261] tun: Universal TUN/TAP device driver, 1.6
  488. [    0.371035] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  489. [    0.371047] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  490. [    0.371084] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
  491. [    0.371092] igb: Copyright (c) 2007-2014 Intel Corporation.
  492. [    0.371120] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
  493. [    0.371129] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  494. [    0.371320] sky2: driver version 1.30
  495. [    0.371632] VFIO - User Level meta-driver version: 0.3
  496. [    0.372267] [USB3][hisi_dwc3_probe]+
  497. [    0.372679] [USB3][get_phy_param]eye diagram param: 0x1c466e3
  498. [    0.372689] [USB3][get_phy_param]eye diagram host param: 0x1c466e3
  499. [    0.372697] [USB3][get_phy_param]usb3_phy_cr_param: 0xb80
  500. [    0.372704] [USB3][get_phy_param]usb3_phy_host_cr_param: 0x980
  501. [    0.372712] [USB3][get_phy_param]usb3_phy_tx_vboost_lvl: 5
  502. [    0.372741] [USB3][get_resource]this is asic platform (fpga flag 0)
  503. [    0.372750] [USB3][create_attr_file]+
  504. [    0.372818] [USB3][create_attr_file]-
  505. [    0.372829] [USB3][hi3660_usb3phy_init]+
  506. [    0.400014] [USB3][config_femtophy_param]set hs phy param 0x1c466e3 for device
  507. [    0.400526] [USB3][config_femtophy_param]set ss phy rx equalization 0xb80
  508. [    0.401410] [USB3][config_femtophy_param]set ss RX_SCOPE_VDCC 0x1
  509. [    0.401419] [USB3][config_femtophy_param]set ss phy tx vboost lvl 0x5
  510. [    0.401427] [USB3][set_hisi_dwc3_power_flag]set hisi_dwc3_power_flag 1
  511. [    0.401434] [USB3][hi3660_usb3phy_init]-
  512. [    0.402730] [dwc3_otg_init]+
  513. [    0.402744] DWC3_OCFG:   0x0
  514. [    0.402749] DWC3_OCTL:   0x40
  515. [    0.402754] DWC3_OEVT:   0x80000000
  516. [    0.402760] DWC3_OEVTEN: 0x0
  517. [    0.402765] DWC3_OSTS:   0x19
  518. [    0.402770] DWC3_BCFG:   0x0
  519. [    0.402775] DWC3_BCEVT:  0x0
  520. [    0.402780] DWC3_BCEVTEN:    0x0
  521. [    0.402785] [dwc3_otg_init]-
  522. [    0.402821] dwc3 ff100000.dwc3: dwc3_host_init if otg, otg will do device_add.
  523. [    0.404795] [USB3][hisi_dwc3_wake_lock]usb otg wake lock
  524. [    0.404819] [USB3][hisi_dwc3_probe]init state: OFF
  525. [    0.404826] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:1
  526. [    0.404833] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:1
  527. [    0.404842] [USB3][hisi_usb_otg_event]event: 1
  528. [    0.404852] [USB3][hisi_dwc3_probe]-
  529. [    0.404855] [USB3][event_work]+
  530. [    0.404857] [USB3][handle_event][handle_event] type: 1
  531. [    0.404861] [dwc3_otg_work]+
  532. [    0.404861]  evt = 4
  533. [    0.404865] [dwc3_otg_stop_peripheral]+
  534. [    0.404866] [dwc3_otg_stop_peripheral]-
  535. [    0.404868] [dwc3_suspend_device] +
  536. [    0.404897] [dwc3_suspend_device] -
  537. [    0.404905] [dwc3_otg_work]-
  538. [    0.404910] [USB3][hisi_dwc3_wake_unlock]usb otg wake unlock
  539. [    0.404920] [USB3][handle_event]hisi usb status: DEVICE -> OFF
  540. [    0.404927] [USB3][event_work]-
  541. [    0.405551] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  542. [    0.405560] ehci-pci: EHCI PCI platform driver
  543. [    0.405588] ehci-platform: EHCI generic platform driver
  544. [    0.405672] ehci-orion: EHCI orion driver
  545. [    0.405730] ehci-exynos: EHCI EXYNOS driver
  546. [    0.405785] ehci-msm: Qualcomm On-Chip EHCI Host Controller
  547. [    0.405838] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  548. [    0.405859] ohci-pci: OHCI PCI platform driver
  549. [    0.405891] ohci-platform: OHCI generic platform driver
  550. [    0.405955] ohci-exynos: OHCI EXYNOS driver
  551. [    0.406233] usbcore: registered new interface driver usb-storage
  552. [    0.406958] [I/hisi_pd] pd_dpm_init
  553. [    0.407053] [I/hisi_pd] pd_dpm_probe : +++++++++
  554. [    0.407097] [I/hisi_pd] pd_dpm_probe ++++
  555. [    0.407097]
  556. [    0.407267] rt1711h_init (1.1.8_G): initializing...
  557. [    0.407294] rt1711h node found...
  558. [    0.408135] rtc-pl031 fff04000.rtc: rtc core: registered pl031 as rtc0
  559. [    0.408602] i2c /dev entries driver
  560. [    0.410350] hi3660_thermal fff30000.tsensor: failed to register thermal sensor0: -19
  561. [    0.410383] hi3660_thermal fff30000.tsensor: failed to register thermal sensor1: -19
  562. [    0.410399] hi3660_thermal fff30000.tsensor: failed to register thermal sensor2: -19
  563. [    0.410416] hi3660_thermal fff30000.tsensor: failed to register thermal sensor3: -19
  564. [    0.410460] hi3660_thermal fff30000.tsensor: failed to register thermal sensor5: -19
  565. [    0.410471] hi3660_thermal fff30000.tsensor: Thermal Sensor Loaded
  566. [    0.413037] sdhci: Secure Digital Host Controller Interface driver
  567. [    0.413063] sdhci: Copyright(c) Pierre Ossman
  568. [    0.413179] Synopsys Designware Multimedia Card Interface Driver
  569. [    0.413728] dwmmc_k3 ff37f000.dwmmc1: 'num-slots' was deprecated.
  570. [    0.413741] dwmmc_k3 ff37f000.dwmmc1: fifo-depth property not found, using value of FIFOTH register as default
  571. [    0.415907] dwmmc_k3 ff37f000.dwmmc1: IDMAC supports 64-bit address mode.
  572. [    0.416220] dwmmc_k3 ff37f000.dwmmc1: Using internal DMA controller.
  573. [    0.416233] dwmmc_k3 ff37f000.dwmmc1: Version ID is 270a
  574. [    0.416284] dwmmc_k3 ff37f000.dwmmc1: DW MMC controller at irq 57,32 bit host data width,256 deep fifo
  575. [    0.416534] dwmmc_k3 ff37f000.dwmmc1: Got CD GPIO
  576. [    0.438397] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  577. [    0.459611] dwmmc_k3 ff3ff000.dwmmc2: 'num-slots' was deprecated.
  578. [    0.459655] dwmmc_k3 ff3ff000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
  579. [    0.461896] dwmmc_k3 ff3ff000.dwmmc2: IDMAC supports 64-bit address mode.
  580. [    0.462742] dwmmc_k3 ff3ff000.dwmmc2: Using internal DMA controller.
  581. [    0.462787] dwmmc_k3 ff3ff000.dwmmc2: Version ID is 270a
  582. [    0.462881] dwmmc_k3 ff3ff000.dwmmc2: DW MMC controller at irq 58,32 bit host data width,256 deep fifo
  583. [    0.464747] sdhci-pltfm: SDHCI platform and OF driver helper
  584. [    0.469896] ledtrig-cpu: registered to indicate activity on CPUs
  585. [    0.471578] usbcore: registered new interface driver usbhid
  586. [    0.471607] usbhid: USB HID core driver
  587. [    0.473042] optee: probing for conduit method from DT.
  588. [    0.477709] optee: initialized driver
  589. [    0.479682] NET: Registered protocol family 17
  590. [    0.479812] 9pnet: Installing 9P2000 support
  591. [    0.479916] Key type dns_resolver registered
  592. [    0.480849] registered taskstats version 1
  593. [    0.487572] ffd74000.serial: ttyAMA3 at MMIO 0xffd74000 (irq = 21, base_baud = 0) is a PL011 rev2
  594. [    0.488596] fdf01000.serial: ttyAMA4 at MMIO 0xfdf01000 (irq = 22, base_baud = 0) is a PL011 rev2
  595. [    0.488729] serial serial0: tty port ttyAMA4 registered
  596. [    0.488972] fff32000.serial: ttyAMA6 at MMIO 0xfff32000 (irq = 23, base_baud = 0) is a PL011 rev2
  597. [    0.504371] ufshcd-hi3660 ff3b0000.ufs: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
  598. [    0.795142] ufs final power mode: gear = 3, lane = 1, pwr = 1, rate = 2
  599. [    0.795146] ufshcd-hi3660 ff3b0000.ufs: set TX_EQUALIZER 3.5db
  600. [    0.797188] ufshcd-hi3660 ff3b0000.ufs: check TX_EQUALIZER DB value lane0 = 0x1
  601. [    0.797192] ufshcd-hi3660 ff3b0000.ufs: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[1, 1], pwr[FAST MODE, FAST MODE], rate = 2
  602. [    0.797676] ufshcd-hi3660 ff3b0000.ufs: ufshcd_find_max_sup_active_icc_level: Regulator capability was not set, actvIccLevel=0
  603. [    0.798464] scsi 0:0:0:49488: scsi_add_lun: correcting incorrect peripheral device type 0x0 for W-LUN 0x            c150hN
  604. [    0.798470] scsi 0:0:0:49488: Well-known LUN    SAMSUNG  KLUBG4G1CE-B0B1  1000 PQ: 0 ANSI: 6
  605. [    0.799852] scsi 0:0:0:49456: scsi_add_lun: correcting incorrect peripheral device type 0x0 for W-LUN 0x            c130hN
  606. [    0.799856] scsi 0:0:0:49456: Well-known LUN    SAMSUNG  KLUBG4G1CE-B0B1  1000 PQ: 0 ANSI: 6
  607. [    0.801409] scsi 0:0:0:49476: scsi_add_lun: correcting incorrect peripheral device type 0x0 for W-LUN 0x            c144hN
  608. [    0.801414] scsi 0:0:0:49476: Well-known LUN    SAMSUNG  KLUBG4G1CE-B0B1  1000 PQ: 0 ANSI: 6
  609. [    0.802503] scsi 0:0:0:0: Direct-Access     SAMSUNG  KLUBG4G1CE-B0B1  1000 PQ: 0 ANSI: 6
  610. [    0.804282] scsi 0:0:0:1: Direct-Access     SAMSUNG  KLUBG4G1CE-B0B1  1000 PQ: 0 ANSI: 6
  611. [    0.805064] sd 0:0:0:0: [sda] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
  612. [    0.805065] scsi 0:0:0:2: Direct-Access     SAMSUNG  KLUBG4G1CE-B0B1  1000 PQ: 0 ANSI: 6
  613. [    0.805068] sd 0:0:0:0: [sda] 16384-byte physical blocks
  614. [    0.805228] sd 0:0:0:0: [sda] Write Protect is off
  615. [    0.805677] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
  616. [    0.805849] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
  617. [    0.805852] sd 0:0:0:1: [sdb] 16384-byte physical blocks
  618. [    0.806004] sd 0:0:0:1: [sdb] Write Protect is off
  619. [    0.806217] scsi 0:0:0:3: Direct-Access     SAMSUNG  KLUBG4G1CE-B0B1  1000 PQ: 0 ANSI: 6
  620. [    0.806748] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
  621. [    0.807086] sd 0:0:0:2: [sdc] 2048 4096-byte logical blocks: (8.39 MB/8.00 MiB)
  622. [    0.807089] sd 0:0:0:2: [sdc] 16384-byte physical blocks
  623. [    0.807460] sd 0:0:0:2: [sdc] Write Protect is off
  624. [    0.808047] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
  625. [    0.809012] sd 0:0:0:3: [sdd] 7805952 4096-byte logical blocks: (32.0 GB/29.8 GiB)
  626. [    0.809015] sd 0:0:0:3: [sdd] 16384-byte physical blocks
  627. [    0.809555] sd 0:0:0:3: [sdd] Write Protect is off
  628. [    0.810474] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
  629. [    0.812724] sd 0:0:0:1: [sdb] Attached SCSI disk
  630. [    0.813061] sd 0:0:0:0: [sda] Attached SCSI disk
  631. [    0.813434] Alternate GPT is invalid, using primary GPT.
  632. [    0.813451]  sdc: sdc1
  633. [    0.814242] Alternate GPT is invalid, using primary GPT.
  634. [    0.814277]  sdd: sdd1 sdd2 sdd3 sdd4 sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 sdd11 sdd12 sdd13
  635. [    0.814681] sd 0:0:0:2: [sdc] Attached SCSI disk
  636. [    0.816106] sd 0:0:0:3: [sdd] Attached SCSI disk
  637. [    2.864281] console [ttyAMA6] enabled
  638. [    2.869069] ssp-pl022 ffd68000.spi: ARM PL022 driver, device ID: 0x00041022
  639. [    2.876176] ssp-pl022 ffd68000.spi: mapped registers from 0x00000000ffd68000 to ffff000009d05000
  640. [    2.885047] ssp-pl022 ffd68000.spi: setup for DMA on RX dma0chan0, TX dma0chan1
  641. [    2.892837] ssp-pl022 ff3b3000.spi: ARM PL022 driver, device ID: 0x00041022
  642. [    2.899914] ssp-pl022 ff3b3000.spi: mapped registers from 0x00000000ff3b3000 to ffff000009d0d000
  643. [    2.908761] ssp-pl022 ff3b3000.spi: setup for DMA on RX dma0chan2, TX dma0chan3
  644. [    2.918363] rt1711_i2c_probe
  645. [    2.921275] I2C functionality : OK...
  646. [    2.927131] rt_parse_dt
  647. [    2.929598] rt1711h_chipID = 0x2171
  648. [    2.933094] regmap_device_register: name = rt1711-4e
  649. [    2.938088]  rt_regmap_rt1711-4e: rt register cache data init
  650. [    2.943848]  rt_regmap_rt1711-4e: cache cata init successfully
  651. [    2.949752] tcpc_device_register register tcpc device (type_c_port0)
  652. [    2.956195] [I/hisi_pd] tcpc_device_register register_pd_wake_unlock_notifier OK
  653. [    2.963598] PD Timer number = 37
  654. [    2.967461] tcpci_timer_init : init OK
  655. [    2.971879] pd_parse_pdata
  656. [    2.974669] pd_parse_pdata src pdo data =
  657. [    2.978689] pd_parse_pdata 0: 0x00019064
  658. [    2.982616] pd_parse_pdata snk pdo data =
  659. [    2.986626] pd_parse_pdata 0: 0x000190c8
  660. [    2.990549] pd_parse_pdata 1: 0x0002d0c8
  661. [    2.994473] pd_parse_pdata id vdos data =
  662. [    2.998483] pd_parse_pdata 0: 0xd00029cf
  663. [    3.002406] pd_parse_pdata 1: 0x00000000
  664. [    3.006329] pd_parse_pdata 2: 0x00010000
  665. [    3.010256] dpm_caps: local_dr_power
  666. [    3.013831] dpm_caps: local_dr_data
  667. [    3.017327] dpm_caps: local_ext_power
  668. [    3.020990] dpm_caps: local_usb_comm
  669. [    3.024564] dpm_caps: local_usb_suspend
  670. [    3.028409] dpm_caps: local_high_cap
  671. [    3.031985] dpm_caps: local_give_back
  672. [    3.035643] dpm_caps: local_no_suspend
  673. [    3.039391] dpm_caps: local_vconn_supply
  674. [    3.043315] dpm_caps: attemp_discover_cable_dfp
  675. [    3.047847] dpm_caps: attemp_enter_dp_mode
  676. [    3.051944] dpm_caps: attemp_discover_cable
  677. [    3.056128] dpm_caps: attemp_discover_id
  678. [    3.060051] dpm_caps: pr_reject_as_source
  679. [    3.064060] dpm_caps: pr_reject_as_sink
  680. [    3.067896] dpm_caps: pr_check_gp_source
  681. [    3.071814] dpm_caps: pr_check_gp_sink
  682. [    3.075563] dpm_caps: dr_reject_as_dfp
  683. [    3.079321] dpm_caps: dr_reject_as_ufp
  684. [    3.083071] dpm_caps: snk_prefer_low_voltage
  685. [    3.087342] dpm_caps: snk_ignore_mismatch_current
  686. [    3.092048] dpm_caps = 0xc010c10b
  687. [    3.095358] [I/hisi_pd] PE:pd_core_init
  688. [    3.100879] rt1711_init_alert name = type_c_port0
  689. [    3.105658] rt1711_init_alert gpio # = 291
  690. [    3.109819] GPIO requested...
  691. [    3.112926] rt1711_init_alert : IRQ number = 69
  692. [    3.117486] rt1711_init_alert : irq initialized...
  693. [    3.123126] IRQF_NO_THREAD Test
  694. [    3.134365] [I/hisi_pd] TPC-I:typec_init: DRP
  695. [    3.191783] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!+++++++++++
  696. [    3.199221] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!-----------
  697. [    3.206657] [E/hisi_pd] typec_unattached_power_entry:!!!+++++++++++
  698. [    3.213967] [E/hisi_pd] tcpci_disable_vbus_control: !!!++++++++
  699. [    3.219931] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=0,+++
  700. [    3.225805] [E/hisi_pd] typec_unattached_power_entry:!!!-----------
  701. [    3.232122] [E/GPIO_HUB] gpio_hub_switch_to_hub: switch to hub
  702. [    3.237996] [I/GPIO_HUB] gpio_hub_change_typec_power: set typec vbus gpio to 0
  703. [    3.245271] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:1
  704. [    3.251050] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:1
  705. [    3.257179] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:2
  706. [    3.262956] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:2
  707. [    3.269084] [USB3][hisi_usb_otg_event]event: 2
  708. [    3.273577] [I/hisi_pd] TPC-I:** Unattached.SNK
  709. [    3.273840] [USB3][event_work]+
  710. [    3.273846] [USB3][handle_event][handle_event] type: 2
  711. [    3.273851] [USB3][set_vbus_power]set port power 1
  712. [    3.273859] [dwc3_otg_work]+
  713. [    3.273859]  evt = 2
  714. [    3.273865] [dwc3_resume_device] +
  715. [    3.274669] [dwc3_resume_device] -
  716. [    3.274673] [dwc3_otg_start_host]+
  717. [    3.275686] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  718. [    3.275725] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  719. [    3.277171] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x00010010
  720. [    3.277252] xhci-hcd xhci-hcd.0.auto: irq 66, io mem 0xff100000
  721. [    3.280275] hub 1-0:1.0: USB hub found
  722. [    3.280320] hub 1-0:1.0: 1 port detected
  723. [    3.280778] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  724. [    3.280803] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  725. [    3.280909] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  726. [    3.281996] hub 2-0:1.0: USB hub found
  727. [    3.282037] hub 2-0:1.0: 1 port detected
  728. [    3.282494] [dwc3_otg_start_host]-
  729. [    3.282498] [dwc3_otg_work]-
  730. [    3.282503] [USB3][hisi_dwc3_wake_lock]usb otg wake lock
  731. [    3.282511] [USB3][handle_event]hisi usb_status: OFF -> HOST
  732. [    3.282516] [USB3][event_work]-
  733. [    3.392270] tcpc_device_irq_enable : tcpc irq enable OK!
  734. [    3.393466] [I/hisi_pd] [TCPC-I]ps_change=1
  735. [    3.401934] rt1711_i2c_probe probe OK!
  736. [    3.408927] [drm] +.
  737. [    3.411241] [drm] wait for external HDMI bridge driver.
  738. [    3.417917] dwmmc_k3 ff3ff000.dwmmc2: 'num-slots' was deprecated.
  739. [    3.424035] dwmmc_k3 ff3ff000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
  740. [    3.436173] dwmmc_k3 ff3ff000.dwmmc2: IDMAC supports 64-bit address mode.
  741. [    3.443091] dwmmc_k3 ff3ff000.dwmmc2: Using internal DMA controller.
  742. [    3.449456] dwmmc_k3 ff3ff000.dwmmc2: Version ID is 270a
  743. [    3.454805] dwmmc_k3 ff3ff000.dwmmc2: DW MMC controller at irq 58,32 bit host data width,128 deep fifo
  744. [    3.464314] mmc_host mmc1: card is non-removable.
  745. [    3.570288] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  746. [    3.596860] [drm] +.
  747. [    3.599177] [drm] wait for external HDMI bridge driver.
  748. [    3.605806] input: keys as /devices/platform/keys/input/input0
  749. [    3.612932] [drm] +.
  750. [    3.615221] rtc-pl031 fff04000.rtc: setting system clock to 1970-01-01 00:02:06 UTC (126)
  751. [    3.615927] usb 1-1: new high-speed USB device number 2 using xhci-hcd
  752. [    3.618979] ALSA device list:
  753. [    3.618981]   No soundcards found.
  754. [    3.630247] dwmmc_k3 ff3ff000.dwmmc2: card claims to support voltages below defined range
  755. [    3.644653] [drm] wait for external HDMI bridge driver.
  756. [    3.650425] uart-pl011 fff32000.serial: no DMA platform data
  757. [    3.656664] EXT4-fs (sdd10): couldn't mount as ext3 due to feature incompatibilities
  758. [    3.657623] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
  759. [    3.660376] mmc1: new SDIO card at address 0001
  760. [    3.709826] EXT4-fs (sdd10): recovery complete
  761. [    3.714885] EXT4-fs (sdd10): mounted filesystem with ordered data mode. Opts: (null)
  762. [    3.722688] VFS: Mounted root (ext4 filesystem) on device 8:58.
  763. [    3.730342] devtmpfs: mounted
  764. [    3.733659] Freeing unused kernel memory: 1152K
  765. [    3.793795] hub 1-1:1.0: USB hub found
  766. [    3.797947] hub 1-1:1.0: 5 ports detected
  767. [    3.805316] systemd[1]: System time before build time, advancing clock.
  768.  
  769. Welcome to Debian GNU/Linux 9 (stretch)!
  770.  
  771. [    3.836226] [drm] +.
  772. [    3.841368] [drm] wait for external HDMI bridge driver.
  773. [    3.912451] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
  774. NetworkManager-wait-online.service: Cannot add dependency job, ignoring: Unit NetworkManager-wait-online.service is masked.
  775. [  OK  ] Reached target Remote File Systems.
  776. [  OK  ] Created slice System[    3.955041] hub 2-1:1.0: USB hub found
  777.  Slice.
  778. [  OK  ] Created slice system-serial\x2dgetty.[    3.962826] hub 2-1:1.0: 5 ports detected
  779. slice.
  780.          Mounting POSIX Message Queue File System...
  781. [  OK[    3.973647] [drm] +.
  782.   ] Reached target Swap.
  783. [  [    3.981203] [drm] wait for external HDMI bridge driver.
  784. OK  ] Started Dispatch Password Requests to Console Directory Watch.
  785. [  OK  ] Created slice system-getty.slice.
  786. [  OK  ] Listening on Journal Socket (/dev/log).
  787. [  OK  ] Created slice User and Session Slice.
  788. [  OK  ] Listening on Journal Socket.
  789.          Starting Nameserver information manager...
  790.          Starting Create Static Device Nodes in /dev...
  791.          Starting Set the console keyboard layout...
  792.          Mounting Debug File System...
  793. [  OK  ] Listening on Journal Audit Socket.
  794. [  OK  ] Listening on fsck to fsckd communication Socket.
  795. [  OK  ] Started Forward Password Requests to Wall Directory Watch.
  796. [  OK  ] Reached target Encrypted Volumes.
  797.          Starting Load Kernel Modules...
  798. [  OK  ] Listening on udev Control Socket.
  799. [  OK  ] Reached target Paths.
  800. [  OK  ] Listening on udev Kernel Socket.
  801. [  OK  ] Reached target Slices.
  802. [  OK  ] Listening on Syslog Socket.
  803.          Starting Journal Servic[    4.080367] EXT4-fs (sdd10): re-mounted. Opts: (null)
  804. e...
  805.          Starting Remount Root and Kernel File Systems...
  806. [  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
  807.          Mounting Huge Pages File System...
  808. [  OK  ] Mounted Debug File System.
  809. [  OK  ] Mounted POSIX Message Queue File System.
  810. [  OK  ] Mounted Huge Pages File System.
  811. [  OK  ] Started Create Static Device Nodes in /dev.
  812. [  OK  ] Started L[    4.124156] usb 1-1.5: new high-speed USB device number 3 using xhci-hcd
  813. oad Kernel Modules.
  814. [  OK  ] Started Nameserver information manager.
  815.          Mounting Configuration File System...
  816.          Starting Apply Kernel Variables...
  817.          Starting udev Kernel Device Manager...
  818. [  OK  ] Mounted Configuration File System.
  819. [  OK  ] Started Apply Kernel Variables.
  820. [  OK  ] Started udev Kernel Device Manager.
  821. [  OK  ] Started Journal Service.
  822. [  OK  ] Started Set the console keyboard layout.
  823. [  OK  ] Started Remount Root and Kernel File Systems.
  824.          Starting Load/Save Random Seed...
  825.          Starting udev Coldplug all Devices...
  826. [    4.237134] [drm] +.
  827. [    4.239753] [drm] wait for external HDMI bridge driver.
  828. [  OK  ] Reached target Local File Systems (Pre).
  829. [  OK  ] Reached target Local File Systems.
  830.          Starting Raise network interfaces...
  831.          Starting Set console font and keymap...
  832.          Starting Flush Journal to Persistent Storage...
  833. [  OK  ] Started Load/Save Random Seed.
  834. [  OK  ] Started Set console font and keymap.
  835. [    4.347064] systemd-journald[1690]: Received request to flush runtime journal from PID 1
  836. [  OK  ] Started Flush Journal to Persistent Storage.
  837.          Starting Create Volatile Files and Directories...
  838. [  OK  ] Started Create Volatile Files and Directories.
  839. [  OK  ] Started udev Coldplug all Devices.
  840. [  OK  ] Found device /dev/ttyAMA6.
  841.          Starting Network Time Synchronization...
  842.          Starting Update UTMP about System Boot/Shutdown...
  843. [  OK  ] Started Update UTMP about System Boot/Shutdown.
  844. [  OK  ] Found device KLUBG4G1CE-B0B1 BOOT.
  845. [  OK  ] Started Raise network interfaces.
  846. [  OK  ] Started Network Time Synchronization.
  847. [  OK  ] Reached target System Time Synchronized.
  848.          Mounting /boot/efi...
  849. [    4.635182] FAT-fs (sdd7): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  850. [  OK  ] Reached target System Initialization.
  851. [  OK  ] Started Daily Cleanup of Temporary Directories.
  852. [  OK  ] Started Daily apt download activities.
  853. [  OK  ] Listening on D-Bus System Message Bus Socket.
  854. [  OK  ] Reached target Sockets.
  855. [  OK  ] Started Trigger anacron every hour.
  856. [  OK  ] Started Daily apt upgrade and clean activities.
  857. [  OK  ] Reached target Timers.
  858. [  OK  ] Reached target Basic System.
  859.          Starting LSB: Load kernel modules needed to enable cpufreq scaling...
  860. [  OK  ] Started D-Bus System Message Bus.
  861.          Starting Network Manager...
  862.          Starting System Logging Service...
  863.          Starting Initialize hardware monitoring sensors...
  864. [  OK  ] Started Run anacron jobs.
  865. [  OK  ] Started Regular background program processing daemon.
  866.          Starting Link to plaform specific files...
  867.          Starting Login Service...
  868. [  OK  ] Mounted /boot/efi.
  869. [  OK  ] Started System Logging Service.
  870. [  OK  ] Started Link to plaform specific files.
  871. [  OK  ] Started Initialize hardware monitoring sensors.
  872. [  OK  ] Started Network Manager.
  873. [  OK  ] Started Login Service.
  874.          Starting Network Manager Script Dispatcher Service...
  875. [  OK  ] Reached target Network.
  876.          Starting Permit User Sessions...
  877.          Starting OpenBSD Secure Shell server...
  878. [  OK  ] Reached target Network is Online.
  879.          Starting /etc/rc.local Compatibility...
  880.          Starting LSB: Advanced IEEE 802.11 management daemon...
  881. [  OK  ] Started LSB: Load kernel modules needed to enable cpufreq scaling.
  882. [  OK  ] Started Permit User Sessions.
  883. [  OK  ] Started /etc/rc.local Compatibility.
  884. [  OK  ] Started LSB: Advanced IEEE 802.11 management daemon.
  885. [  OK  ] Started OpenBSD Secure Shell server.
  886. [  OK  ] Started Network Manager Script Dispatcher Service.
  887.          Starting Hostname Service...
  888. [  OK  ] Started Getty on tty1.
  889. [  OK  ] Started Serial Getty on ttyAMA6.
  890. [  OK  ] Reached target Login Prompts.
  891.          Starting LSB: set CPUFreq kernel parameters...
  892. [  OK  ] Started LSB: set CPUFreq kernel parameters.
  893. [  OK  ] Reached target Multi-User System.
  894. [  OK  ] Reached target Graphical Interface.
  895.          Starting Update UTMP about System Runlevel Changes...
  896. [  OK  ] Started Hostname Service.
  897.          Starting Authorization Manager...
  898. [  OK  ] Started Update UTMP about System Runlevel Changes.
  899. [  OK  ] Started Authorization Manager.
  900.  
  901. Debian GNU/Linux 9 linaro-developer ttyAMA6
  902.  
  903. linaro-developer login: root (automatic login)
  904.  
  905. Last login: Thu Nov  3 17:16:43 UTC 2016 on ttyAMA6
  906. Linux linaro-developer 4.14.0-rc7-linaro-hikey960+ #8 SMP PREEMPT Thu Mar 8 11:34:37 UTC 2018 aarch64
  907.  
  908. The programs included with the Debian GNU/Linux system are free software;
  909. the exact distribution terms for each program are described in the
  910. individual files in /usr/share/doc/*/copyright.
  911.  
  912. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
  913. permitted by applicable law.
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top