Yorkie

Untitled

Jan 9th, 2020
170
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [stevo@zen ~]$ cat /sys/class/net/enp0s31f6/speed
  2. 1000
  3. [stevo@zen ~]$ lspci
  4. 00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers (rev 07)
  5. 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor PCIe Controller (x16) (rev 07)
  6. 00:02.0 Display controller: Intel Corporation HD Graphics 530 (rev 06)
  7. 00:14.0 USB controller: Intel Corporation 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller (rev 31)
  8. 00:14.2 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Thermal Subsystem (rev 31)
  9. 00:16.0 Communication controller: Intel Corporation 100 Series/C230 Series Chipset Family MEI Controller #1 (rev 31)
  10. 00:17.0 RAID bus controller: Intel Corporation SATA Controller [RAID mode] (rev 31)
  11. 00:1c.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #1 (rev f1)
  12. 00:1f.0 ISA bridge: Intel Corporation Q170 Chipset LPC/eSPI Controller (rev 31)
  13. 00:1f.2 Memory controller: Intel Corporation 100 Series/C230 Series Chipset Family Power Management Controller (rev 31)
  14. 00:1f.3 Audio device: Intel Corporation 100 Series/C230 Series Chipset Family HD Audio Controller (rev 31)
  15. 00:1f.4 SMBus: Intel Corporation 100 Series/C230 Series Chipset Family SMBus (rev 31)
  16. 00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (2) I219-LM (rev 31)
  17. 01:00.0 VGA compatible controller: NVIDIA Corporation GM107 [GeForce GTX 745] (rev a2)
  18. 01:00.1 Audio device: NVIDIA Corporation Device 0fbc (rev a1)
  19. 02:00.0 PCI bridge: Texas Instruments XIO2001 PCI Express-to-PCI Bridge
  20. [stevo@zen ~]$ inxi -Fx
  21. System: Host: zen Kernel: 5.4.6-2-MANJARO x86_64 bits: 64 compiler: gcc v: 9.2.0 Desktop: KDE Plasma 5.17.4
  22. Distro: Manjaro Linux
  23. Machine: Type: Desktop System: Dell product: OptiPlex 7040 v: N/A serial: <root required>
  24. Mobo: Dell model: 0Y7WYT v: A00 serial: <root required> UEFI [Legacy]: Dell v: 1.15.5 date: 07/19/2019
  25. CPU: Topology: Quad Core model: Intel Core i7-6700 bits: 64 type: MT MCP arch: Skylake-S rev: 3 L2 cache: 8192 KiB
  26. flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 54417
  27. Speed: 900 MHz min/max: 800/4000 MHz Core speeds (MHz): 1: 900 2: 900 3: 900 4: 900 5: 901 6: 900 7: 900 8: 900
  28. Graphics: Device-1: Intel HD Graphics 530 vendor: Dell driver: i915 v: kernel bus ID: 00:02.0
  29. Device-2: NVIDIA GM107 [GeForce GTX 745] driver: nvidia v: 440.44 bus ID: 01:00.0
  30. Display: x11 server: X.Org 1.20.6 driver: nvidia resolution: 1920x1080~60Hz, 1920x1080~60Hz, 1920x1080~60Hz
  31. OpenGL: renderer: GeForce GTX 745/PCIe/SSE2 v: 4.6.0 NVIDIA 440.44 direct render: Yes
  32. Audio: Device-1: Intel 100 Series/C230 Series Family HD Audio vendor: Dell driver: snd_hda_intel v: kernel bus ID: 00:1f.3
  33. Device-2: NVIDIA driver: snd_hda_intel v: kernel bus ID: 01:00.1
  34. Sound Server: ALSA v: k5.4.6-2-MANJARO
  35. Network: Device-1: Intel Ethernet I219-LM vendor: Dell driver: e1000e v: 3.2.6-k port: f040 bus ID: 00:1f.6
  36. IF: enp0s31f6 state: up speed: 1000 Mbps duplex: full mac: f4:8e:38:aa:18:54
  37. Device-2: Realtek RTL8188EUS 802.11n Wireless Network Adapter type: USB driver: r8188eu bus ID: 1-1:2
  38. IF: wlp0s20f0u1 state: up mac: 34:e8:94:df:33:f6
  39. Drives: Local Storage: total: 931.52 GiB used: 202.82 GiB (21.8%)
  40. ID-1: /dev/sda vendor: SanDisk model: SSD PLUS 1000GB size: 931.52 GiB
  41. RAID: Hardware-1: Intel SATA Controller [RAID mode] driver: ahci v: 3.0 bus ID: 00:17.0
  42. Partition: ID-1: / size: 887.06 GiB used: 202.82 GiB (22.9%) fs: ext4 dev: /dev/sda2
  43. ID-2: swap-1 size: 29.30 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda1
  44. Sensors: System Temperatures: cpu: 45.0 C mobo: 29.8 C gpu: nvidia temp: 54 C
  45. Fan Speeds (RPM): N/A gpu: nvidia fan: 24%
  46. Info: Processes: 288 Uptime: 11h 22m Memory: 31.25 GiB used: 2.64 GiB (8.5%) Init: systemd Compilers: gcc: 9.2.0
  47. clang: 9.0.0 Shell: bash v: 5.0.11 inxi: 3.0.37
  48. [stevo@zen ~]$ nmcli device show
  49. GENERAL.DEVICE: wlp0s20f0u1
  50. GENERAL.TYPE: wifi
  51. GENERAL.HWADDR: 34:E8:94:DF:33:F6
  52. GENERAL.MTU: 1500
  53. GENERAL.STATE: 100 (connected)
  54. GENERAL.CONNECTION: New 802-11-wireless connection
  55. GENERAL.CON-PATH: /org/freedesktop/NetworkManager/ActiveConnection/5
  56. IP4.ADDRESS[1]: 192.168.30.107/24
  57. IP4.GATEWAY: 192.168.30.1
  58. IP4.ROUTE[1]: dst = 0.0.0.0/0, nh = 192.168.30.1, mt = 600
  59. IP4.ROUTE[2]: dst = 192.168.30.0/24, nh = 0.0.0.0, mt = 600
  60. IP4.DNS[1]: 192.168.30.1
  61. IP6.ADDRESS[1]: fe80::36e8:94ff:fedf:33f6/64
  62. IP6.GATEWAY: --
  63. IP6.ROUTE[1]: dst = ff00::/8, nh = ::, mt = 256, table=255
  64. IP6.ROUTE[2]: dst = fe80::/64, nh = ::, mt = 256
  65.  
  66. GENERAL.DEVICE: enp0s31f6
  67. GENERAL.TYPE: ethernet
  68. GENERAL.HWADDR: F4:8E:38:AA:18:54
  69. GENERAL.MTU: 1500
  70. GENERAL.STATE: 30 (disconnected)
  71. GENERAL.CONNECTION: --
  72. GENERAL.CON-PATH: --
  73. WIRED-PROPERTIES.CARRIER: on
  74.  
  75. GENERAL.DEVICE: lo
  76. GENERAL.TYPE: loopback
  77. GENERAL.HWADDR: 00:00:00:00:00:00
  78. GENERAL.MTU: 65536
  79. GENERAL.STATE: 10 (unmanaged)
  80. GENERAL.CONNECTION: --
  81. GENERAL.CON-PATH: --
  82. IP4.ADDRESS[1]: 127.0.0.1/8
  83. IP4.GATEWAY: --
  84. IP6.ADDRESS[1]: ::1/128
  85. IP6.GATEWAY: --
  86. IP6.ROUTE[1]: dst = ::1/128, nh = ::, mt = 256
  87. [stevo@zen ~]$ inxi -Nxx
  88. Network: Device-1: Intel Ethernet I219-LM vendor: Dell driver: e1000e v: 3.2.6-k port: f040 bus ID: 00:1f.6
  89. chip ID: 8086:15b7
  90. Device-2: Realtek RTL8188EUS 802.11n Wireless Network Adapter type: USB driver: r8188eu bus ID: 1-1:2
  91. chip ID: 0bda:8179
  92. [stevo@zen ~]$ cat /etc/dhcpcd.conf
  93. # A sample configuration for dhcpcd.
  94. # See dhcpcd.conf(5) for details.
  95.  
  96. # Allow users of this group to interact with dhcpcd via the control socket.
  97. #controlgroup wheel
  98.  
  99. # Inform the DHCP server of our hostname for DDNS.
  100. hostname
  101.  
  102. # Use the hardware address of the interface for the Client ID.
  103. #clientid
  104. # or
  105. # Use the same DUID + IAID as set in DHCPv6 for DHCPv4 ClientID as per RFC4361.
  106. # Some non-RFC compliant DHCP servers do not reply with this set.
  107. # In this case, comment out duid and enable clientid above.
  108. duid
  109.  
  110. # Persist interface configuration when dhcpcd exits.
  111. persistent
  112.  
  113. # Rapid commit support.
  114. # Safe to enable by default because it requires the equivalent option set
  115. # on the server to actually work.
  116. option rapid_commit
  117.  
  118. # A list of options to request from the DHCP server.
  119. option domain_name_servers, domain_name, domain_search, host_name
  120. option classless_static_routes
  121. # Respect the network MTU. This is applied to DHCP routes.
  122. option interface_mtu
  123.  
  124. # Most distributions have NTP support.
  125. #option ntp_servers
  126.  
  127. # A ServerID is required by RFC2131.
  128. require dhcp_server_identifier
  129.  
  130. # Generate SLAAC address using the Hardware Address of the interface
  131. #slaac hwaddr
  132. # OR generate Stable Private IPv6 Addresses based from the DUID
  133. slaac private
  134. noipv4ll
  135. [stevo@zen ~]$ cat /etc/default/grub
  136. GRUB_DEFAULT=saved
  137. GRUB_TIMEOUT=10
  138. GRUB_TIMEOUT_STYLE=hidden
  139. GRUB_DISTRIBUTOR="Manjaro"
  140. GRUB_CMDLINE_LINUX_DEFAULT="quiet apparmor=1 security=apparmor udev.log_priority=3"
  141. GRUB_CMDLINE_LINUX=""
  142.  
  143. # If you want to enable the save default function, uncomment the following
  144. # line, and set GRUB_DEFAULT to saved.
  145. GRUB_SAVEDEFAULT=true
  146.  
  147. # Preload both GPT and MBR modules so that they are not missed
  148. GRUB_PRELOAD_MODULES="part_gpt part_msdos"
  149.  
  150. # Uncomment to enable booting from LUKS encrypted devices
  151. #GRUB_ENABLE_CRYPTODISK=y
  152.  
  153. # Uncomment to use basic console
  154. GRUB_TERMINAL_INPUT=console
  155.  
  156. # Uncomment to disable graphical terminal
  157. #GRUB_TERMINAL_OUTPUT=console
  158.  
  159. # The resolution used on graphical terminal
  160. # note that you can use only modes which your graphic card supports via VBE
  161. # you can see them in real GRUB with the command 'videoinfo'
  162. GRUB_GFXMODE=auto
  163.  
  164. # Uncomment to allow the kernel use the same resolution used by grub
  165. GRUB_GFXPAYLOAD_LINUX=keep
  166.  
  167. # Uncomment if you want GRUB to pass to the Linux kernel the old parameter
  168. # format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
  169. #GRUB_DISABLE_LINUX_UUID=true
  170.  
  171. # Uncomment to disable generation of recovery mode menu entries
  172. GRUB_DISABLE_RECOVERY=true
  173.  
  174. # Uncomment and set to the desired menu colors. Used by normal and wallpaper
  175. # modes only. Entries specified as foreground/background.
  176. GRUB_COLOR_NORMAL="light-gray/black"
  177. GRUB_COLOR_HIGHLIGHT="green/black"
  178.  
  179. # Uncomment one of them for the gfx desired, a image background or a gfxtheme
  180. #GRUB_BACKGROUND="/usr/share/grub/background.png"
  181. GRUB_THEME="/usr/share/grub/themes/manjaro/theme.txt"
  182.  
  183. # Uncomment to get a beep at GRUB start
  184. #GRUB_INIT_TUNE="480 440 1"
  185. [stevo@zen ~]$
RAW Paste Data