[  112.928023] WARNING: at /build/linux-rWiNF8/linux-3.2.68/drivers/ata/libata-core.c:3386 ata_wait_ready+0x5e/0x134 [libata]()
[  112.928027] Hardware name: MediaSmart Server
[  112.928029] Modules linked in: crc_t10dif usb_storage ata_generic pata_marvell ahci libahci sata_sis pata_sis libata fan thermal thermal_sys ohci_hcd ehci_hcd scsi_mod
usbcore sis190 mii usb_common
[  112.928047] Pid: 137, comm: scsi_eh_3 Tainted: G        W    3.2.0-4-amd64 #1 Debian 3.2.68-1+deb7u5
[  112.928050] Call Trace:
[  112.928058]  [<ffffffff81046de1>] ? warn_slowpath_common+0x78/0x8c
[  112.928066]  [<ffffffffa012caf2>] ? ata_is_dma+0x1a/0x1a [libata]
[  112.928075]  [<ffffffffa01233e4>] ? ata_wait_ready+0x5e/0x134 [libata]
[  112.928083]  [<ffffffffa012caf2>] ? ata_is_dma+0x1a/0x1a [libata]
[  112.928091]  [<ffffffffa0123667>] ? sata_link_hardreset+0x179/0x1bd [libata]
[  112.928100]  [<ffffffffa012ee03>] ? ata_bmdma_qc_prep+0x8d/0x8d [libata]
[  112.928108]  [<ffffffffa012ee3b>] ? sata_sff_hardreset+0x38/0x64 [libata]
[  112.928117]  [<ffffffffa012a1aa>] ? ata_eh_reset+0x455/0x9bf [libata]
[  112.928125]  [<ffffffffa012e0eb>] ? ata_sff_wait_after_reset+0x100/0x100 [libata]
[  112.928132]  [<ffffffffa012ee03>] ? ata_bmdma_qc_prep+0x8d/0x8d [libata]
[  112.928141]  [<ffffffffa012db77>] ? ata_sff_drain_fifo+0x62/0x62 [libata]
[  112.928150]  [<ffffffffa012aae7>] ? ata_eh_recover+0x2c6/0xfde [libata]
[  112.928157]  [<ffffffffa011ee85>] ? ata_dev_next+0x84/0xed [libata]
[  112.928165]  [<ffffffffa012f043>] ? ata_sff_lost_interrupt+0x58/0x58 [libata]
[  112.928173]  [<ffffffffa012e0eb>] ? ata_sff_wait_after_reset+0x100/0x100 [libata]
[  112.928181]  [<ffffffffa012ee03>] ? ata_bmdma_qc_prep+0x8d/0x8d [libata]
[  112.928189]  [<ffffffffa012db77>] ? ata_sff_drain_fifo+0x62/0x62 [libata]
[  112.928198]  [<ffffffffa0127b29>] ? ata_eh_clear_action+0x44/0xb3 [libata]
[  112.928207]  [<ffffffffa012bed3>] ? ata_do_eh+0x47/0x93 [libata]
[  112.928215]  [<ffffffffa012db77>] ? ata_sff_drain_fifo+0x62/0x62 [libata]
[  112.928223]  [<ffffffffa012ee03>] ? ata_bmdma_qc_prep+0x8d/0x8d [libata]
[  112.928230]  [<ffffffffa012e0eb>] ? ata_sff_wait_after_reset+0x100/0x100 [libata]
[  112.928238]  [<ffffffffa012f043>] ? ata_sff_lost_interrupt+0x58/0x58 [libata]
[  112.928247]  [<ffffffffa012bacc>] ? ata_scsi_port_error_handler+0x232/0x53d [libata]
[  112.928253]  [<ffffffff81351247>] ? _raw_spin_unlock_irqrestore+0xe/0xf
[  112.928262]  [<ffffffffa0127eef>] ? ata_scsi_cmd_error_handler+0xdd/0x116 [libata]
[  112.928272]  [<ffffffffa0083076>] ? scsi_eh_get_sense+0x189/0x189 [scsi_mod]
[  112.928281]  [<ffffffffa012be63>] ? ata_scsi_error+0x8c/0xb5 [libata]
[  112.928289]  [<ffffffffa0083076>] ? scsi_eh_get_sense+0x189/0x189 [scsi_mod]
[  112.928296]  [<ffffffffa0083184>] ? scsi_error_handler+0x10e/0x606 [scsi_mod]
[  112.928304]  [<ffffffffa0083076>] ? scsi_eh_get_sense+0x189/0x189 [scsi_mod]
[  112.928310]  [<ffffffff8105f829>] ? kthread+0x76/0x7e
[  112.928315]  [<ffffffff813583f4>] ? kernel_thread_helper+0x4/0x10
[  112.928320]  [<ffffffff8105f7b3>] ? kthread_worker_fn+0x139/0x139
[  112.928324]  [<ffffffff813583f0>] ? gs_change+0x13/0x13
[  112.928327] ---[ end trace d2c6b5992a77bcaf ]---
[  112.928361] ata4.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  112.928371] ata4.01: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  112.928380] ata4.01: link online but device misclassified
[  112.928383] ata4.00: link online but 1 devices misclassified, device detection might fail
[  112.976355] ata4.00: ATA-8: Hitachi HDS5C3020ALA632, ML6OA580, max UDMA/133
[  112.976360] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[  112.992334] ata4.00: configured for UDMA/133
[  112.992475] scsi 3:0:0:0: Direct-Access     ATA      Hitachi HDS5C302 ML6O PQ: 0 ANSI: 5
[  113.013490] sd 4:0:0:0: [sda] 506880 512-byte logical blocks: (259 MB/247 MiB)
[  113.013618] sd 4:0:0:0: Attached scsi generic sg0 type 0
[  113.013670] sd 5:0:0:0: [sdb] 7864320 512-byte logical blocks: (4.02 GB/3.75 GiB)
[  113.014171] sd 5:0:0:0: Attached scsi generic sg1 type 0
[  113.014331] sd 5:0:0:0: [sdb] Write Protect is off
[  113.014336] sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00
[  113.014365] sd 2:0:0:0: Attached scsi generic sg2 type 0
[  113.014400] sd 4:0:0:0: [sda] Write Protect is off
[  113.014403] sd 4:0:0:0: [sda] Mode Sense: 43 00 00 00
[  113.014527] sd 3:0:0:0: Attached scsi generic sg3 type 0
[  113.014925] sd 5:0:0:0: [sdb] No Caching mode page found
[  113.014982] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[  113.015324] sd 4:0:0:0: [sda] No Caching mode page found
[  113.015379] sd 4:0:0:0: [sda] Assuming drive cache: write through
[  113.016749] sd 2:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
[  113.016754] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[  113.016821] sd 2:0:0:0: [sdc] Write Protect is off
[  113.016825] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[  113.016850] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  113.018654] sd 4:0:0:0: [sda] No Caching mode page found
[  113.018712] sd 4:0:0:0: [sda] Assuming drive cache: write through
[  113.019034] sd 5:0:0:0: [sdb] No Caching mode page found
[  113.019089] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[  113.020611]  sda: sda1
[  113.022248]  sdb: sdb1 sdb2 < sdb5 >
[  113.022860] sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[  113.022937] sd 3:0:0:0: [sdd] Write Protect is off
[  113.022941] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[  113.022964] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  113.024924] sd 5:0:0:0: [sdb] No Caching mode page found
[  113.024982] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[  113.025042] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[  113.025068] sd 4:0:0:0: [sda] No Caching mode page found
[  113.025120] sd 4:0:0:0: [sda] Assuming drive cache: write through
[  113.025173] sd 4:0:0:0: [sda] Attached SCSI disk
[  113.041816]  sdd: sdd1 sdd2
[  113.042934] sd 3:0:0:0: [sdd] Attached SCSI disk
[  113.062108] GPT:Primary header thinks Alt. header is not at the end of the disk.
[  113.062114] GPT:1565565871 != 5860533167
[  113.062117] GPT:Alternate GPT header not at the end of the disk.
[  113.062120] GPT:1565565871 != 5860533167
[  113.062121] GPT: Use GNU Parted to correct GPT errors.
[  113.062159]  sdc: sdc1 sdc2
[  113.062754] sd 2:0:0:0: [sdc] Attached SCSI disk
[  113.372314] microcode: CPU0: family 15 not supported
[  113.372855] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[  113.427891] device-mapper: uevent: version 1.0.3
[  113.428496] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[  113.442046] PM: Starting manual resume from disk
[  113.442052] PM: Hibernation image partition 8:21 present
[  113.442054] PM: Looking for hibernation image.
[  113.443044] PM: Image not found (code -22)
[  113.443047] PM: Hibernation image not present or could not be loaded.
[  113.468721] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[  114.211445] udevd[343]: starting version 175
[  114.336280] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  114.369097] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[  114.369107] ACPI: Power Button [PWRB]
[  114.369207] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[  114.369212] ACPI: Power Button [PWRF]
[  114.496228] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[  114.501844] EDAC MC: Ver: 2.1.0
[  114.570900] MCE: In-kernel MCE decoding enabled.
[  114.575624] AMD64 EDAC driver v3.4.0
[  114.575680] EDAC amd64: DRAM ECC disabled.
[  114.575685] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[  114.575687]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[  114.575689]  (Note that use of the override may cause unknown side effects.)
[  114.578848] powernow-k8: Found 1 AMD Sempron(tm) Processor 3400+ (1 cpu cores) (version 2.20.00)
[  114.578899] powernow-k8: fid 0xa (1800 MHz), vid 0xa
[  114.578902] powernow-k8: fid 0x2 (1000 MHz), vid 0x16
[  114.580631] input: PC Speaker as /devices/platform/pcspkr/input/input2
[  114.640391] Error: Driver 'pcspkr' is already registered, aborting...
[  114.920164] Marking TSC unstable due to cpufreq changes
[  114.924047] Switching to clocksource acpi_pm
[  115.607302] Adding 211964k swap on /dev/sdb5.  Priority:-1 extents:1 across:211964k
[  115.616133] EXT4-fs (sdb1): re-mounted. Opts: (null)
[  115.777533] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[  115.943869] loop: module loaded
[  118.793024] fuse init (API version 7.17)
[  120.118193] ADDRCONF(NETDEV_UP): lo: link is not ready
[  120.882784] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  120.952724] RPC: Registered named UNIX socket transport module.
[  120.952733] RPC: Registered udp transport module.
[  120.952738] RPC: Registered tcp transport module.
[  120.952742] RPC: Registered tcp NFSv4.1 backchannel transport module.
[  120.976570] FS-Cache: Loaded
[  121.030290] FS-Cache: Netfs 'nfs' registered for caching
[  121.057799] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[  127.773338] Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout= 0)
[  130.944030] sis190 0000:00:04.0: eth0: mii ext = 0000
[  130.968025] sis190 0000:00:04.0: eth0: mii lpa=cde1 adv=01e1 exp=000f
[  130.984021] sis190 0000:00:04.0: eth0: link on 1000 Mbps Full Duplex mode
[  130.984774] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready