Advertisement
Guest User

Untitled

a guest
Jan 8th, 2014
151
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 43.72 KB | None | 0 0
  1. U-Boot SPL 2014.01-rc1-09153-gc75ea90 (Jan 07 2014 - 22:42:38)
  2. Board: A13_MID
  3. DRAM: 512 MiB
  4. CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2
  5. spl: not an uImage at 1600
  6.  
  7.  
  8. U-Boot 2014.01-rc1-09153-gc75ea90 (Jan 07 2014 - 22:42:38) Allwinner Technology
  9.  
  10. CPU: Allwinner A13/A10s (SUN5I)
  11. Board: A13_MID
  12. I2C: ready
  13. DRAM: 512 MiB
  14. MMC: SUNXI SD/MMC: 0
  15. *** Warning - bad CRC, using default environment
  16.  
  17. In: serial
  18. Out: serial
  19. Err: serial
  20. Hit any key to stop autoboot: 3  2  1  0
  21. reading uEnv.txt
  22. 14 bytes read in 6 ms (2 KiB/s)
  23. Loaded environment from uEnv.txt
  24. reading boot.scr
  25. 310 bytes read in 5 ms (60.5 KiB/s)
  26. Jumping to boot.scr
  27. ## Executing script at 44000000
  28. reading boot/script.bin
  29. 28936 bytes read in 14 ms (2 MiB/s)
  30. reading boot/uImage
  31. 4375424 bytes read in 281 ms (14.8 MiB/s)
  32. ## Booting kernel from Legacy Image at 48000000 ...
  33. Image Name: Linux-3.4.67
  34. Image Type: ARM Linux Kernel Image (uncompressed)
  35. Data Size: 4375360 Bytes = 4.2 MiB
  36. Load Address: 40008000
  37. Entry Point: 40008000
  38. Verifying Checksum ... OK
  39. Loading Kernel Image ... OK
  40. Using machid 0x1008 from environment
  41.  
  42. Starting kernel ...
  43.  
  44. <6>Booting Linux on physical CPU 0
  45.  
  46. <6>Initializing cgroup subsys cpuset
  47.  
  48. <5>Linux version 3.4.67 (h36sa@h36sa-ThinkPad-T61) (gcc version 4.8.1 (Ubuntu/Linaro
  49.  
  50. 4.8.1-10ubuntu7) ) #5 PREEMPT Tue Jan 7 22:59:42 PST 2014
  51.  
  52. CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  53.  
  54. CPU: PIPT / VIPT nonaliasing data
  55.  
  56. cache, VIPT aliasing instruction cache
  57.  
  58. Machine: sun4i
  59.  
  60. <6>Memory cut off:
  61.  
  62. <6> MALI : 0x5c000000 - 0x5fffffff ( 64 MB)
  63.  
  64. <4>Ignoring unrecognised tag
  65.  
  66. 0x00000000
  67.  
  68. <6>Memory Reserved:
  69.  
  70. <6> SYS : 0x43000000 - 0x4300ffff ( 64 kB)
  71.  
  72. <6> VE : 0x44000000 - 0x48ffffff ( 80 MB)
  73.  
  74. <6> G2D : 0x49000000 -
  75.  
  76. 0x49ffffff ( 16 MB)
  77.  
  78. <6> LCD : 0x5a000000 - 0x5bffffff ( 32 MB)
  79.  
  80. Memory policy: ECC disabled, Data cache writeback
  81.  
  82. <6>sunxi: Allwinner A13 revision
  83.  
  84. A (AW1625/sun5i) detected.
  85.  
  86. <7>On node 0 totalpages: 114688
  87.  
  88. <7>free_area_init_node: node 0, pgdat c084daa0, node_mem_map c0a15000
  89.  
  90. <7> Normal zone: 896 pages
  91.  
  92. used for memmap
  93.  
  94. <7> Normal zone: 0 pages reserved
  95.  
  96. <7> Normal zone: 113792 pages, LIFO batch:31
  97.  
  98. <7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768<c>
  99.  
  100. <7>pcpu-
  101.  
  102. alloc: <c>[0] <c>0 <c>
  103.  
  104. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113792
  105.  
  106. <5>Kernel command line: console=ttyS0,115200
  107.  
  108. hdmi.audio=EDID:0 disp.screen0_output_mode=EDID:800x480p50 root=/dev/mmcblk0p2 rootwait panic=10
  109.  
  110. <6>PID hash table entries: 2048 (order: 1, 8192 bytes)
  111.  
  112.  
  113.  
  114. <6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  115.  
  116. <6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  117.  
  118. <6>Memory: 448MB = 448MB
  119.  
  120. total
  121.  
  122. <5>Memory: 313260k/313260k available, 145492k reserved, 0K highmem
  123.  
  124. <5>Virtual kernel memory layout:
  125.  
  126. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  127.  
  128.  
  129.  
  130. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  131.  
  132. vmalloc : 0xdc800000 - 0xff000000 ( 552 MB)
  133.  
  134. lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
  135.  
  136. pkmap
  137.  
  138. : 0xbfe00000 - 0xc0000000 ( 2 MB)
  139.  
  140. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  141.  
  142. .text : 0xc0008000 - 0xc07bcd98 (7892 kB)
  143.  
  144. .init :
  145.  
  146. 0xc07bd000 - 0xc07eb000 ( 184 kB)
  147.  
  148. .data : 0xc07ec000 - 0xc0858b10 ( 435 kB)
  149.  
  150. .bss : 0xc0858b34 - 0xc0a144a8 (1775 kB)
  151.  
  152. <6>SLUB: Genslabs=11,
  153.  
  154. HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  155.  
  156. <6>NR_IRQS:128
  157.  
  158. <6>sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  159.  
  160. <6>Console: colour
  161.  
  162. dummy device 80x30
  163.  
  164. <6>Calibrating delay loop... <c>1001.88 BogoMIPS (lpj=5009408)
  165.  
  166. <6>pid_max: default: 32768 minimum: 301
  167.  
  168. <6>Mount-cache hash table entries:
  169.  
  170. 512
  171.  
  172. <6>Initializing cgroup subsys cpuacct
  173.  
  174. <6>Initializing cgroup subsys devices
  175.  
  176. <6>Initializing cgroup subsys freezer
  177.  
  178. <6>Initializing cgroup subsys blkio
  179.  
  180.  
  181.  
  182. <6>CPU: Testing write buffer coherency: ok
  183.  
  184. <6>hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  185.  
  186. <6>Setting up static identity map
  187.  
  188. for 0x4055dba8 - 0x4055dc00
  189.  
  190. <6>devtmpfs: initialized
  191.  
  192. <6>dummy:
  193.  
  194. <6>NET: Registered protocol family 16
  195.  
  196. <6>hw-breakpoint: debug architecture 0x4 unsupported.
  197.  
  198.  
  199.  
  200. <6>Init eGon pin module V2.0
  201.  
  202. SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
  203.  
  204. <6>Initialize DMAC OK
  205.  
  206. <6>bio: create slab <bio-0> at 0
  207.  
  208. <6>sunxi_gpio
  209.  
  210. driver init ver 1.3
  211.  
  212. <6>sunxi_gpio_probe can't find script.bin '[gpio_para]' 'gpio_used'
  213.  
  214. <4>gpio-sunxi: probe of gpio-sunxi failed with error -4
  215.  
  216. <5>SCSI
  217.  
  218. subsystem initialized
  219.  
  220. <7>libata version 3.00 loaded.
  221.  
  222. <6>usbcore: registered new interface driver usbfs
  223.  
  224. <6>usbcore: registered new interface driver hub
  225.  
  226.  
  227.  
  228. <6>usbcore: registered new device driver usb
  229.  
  230. <6>Linux video capture interface: v2.00
  231.  
  232. <6>Advanced Linux Sound Architecture Driver Version 1.0.25.
  233.  
  234. <6>Bluetooth:
  235.  
  236. Core ver 2.16
  237.  
  238. <6>NET: Registered protocol family 31
  239.  
  240. <6>Bluetooth: HCI device and connection manager initialized
  241.  
  242. <6>Bluetooth: HCI socket layer initialized
  243.  
  244.  
  245.  
  246. <6>Bluetooth: L2CAP socket layer initialized
  247.  
  248. <6>Bluetooth: SCO socket layer initialized
  249.  
  250. <6>Switching to clocksource aw_64bits_counter
  251.  
  252. <6>cfg80211: Calling
  253.  
  254. CRDA to update world regulatory domain
  255.  
  256. <5>FS-Cache: Loaded
  257.  
  258. <6>CacheFiles: Loaded
  259.  
  260. [usb_manager]: CONFIG_USB_SW_SUNXI_USB0_OTG
  261.  
  262. [sw_hcd0]: usb host driver
  263.  
  264. initialize........
  265.  
  266. [sw_hcd0]: open_usb_clock
  267.  
  268. [sw_hcd0]: host_init_state = 0
  269.  
  270. [sw_hcd0]: platform is usb host
  271.  
  272. [sw_hcd0]: sw_hcd_host0: ConfigData=0xde (UTMI-8,
  273.  
  274. dyn FIFOs, bulk combine, bulk split, HB-ISO Rx (X), HB-ISO Tx (X), SoftConn)
  275.  
  276. [sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at
  277.  
  278. f1c13000 using PIO, IRQ 38
  279.  
  280. <6>sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
  281.  
  282. <6>sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
  283.  
  284. <6>hub
  285.  
  286. 1-0:1.0: USB hub found
  287.  
  288. <6>hub 1-0:1.0: 1 port detected
  289.  
  290. wrn: hcd is not enable, need not start hcd
  291.  
  292. [sw_hcd0]: sw_usb_host0_disable start
  293.  
  294. -------
  295.  
  296. sw_hcd0_soft_disconnect---------
  297.  
  298. is_on = 0, hcd0_set_vbus_cnt = 0
  299.  
  300. [sw_hcd_host0]: Set USB Power Off
  301.  
  302. wrn: hcd is not enable, need not stop hcd
  303.  
  304. [sw_hcd0]:
  305.  
  306. close_usb_clock
  307.  
  308. [sw_hcd0]: sw_usb_host0_disable end
  309.  
  310. [sw_udc]: udc_init: version 20080411
  311.  
  312. <6>NET: Registered protocol family 2
  313.  
  314. <6>IP route cache hash table
  315.  
  316. entries: 4096 (order: 2, 16384 bytes)
  317.  
  318. <6>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  319.  
  320. <6>TCP bind hash table entries: 16384 (order: 4,
  321.  
  322. 65536 bytes)
  323.  
  324. <6>TCP: Hash tables configured (established 16384 bind 16384)
  325.  
  326. <6>TCP: reno registered
  327.  
  328. <6>UDP hash table entries: 256 (order: 0, 4096 bytes)
  329.  
  330.  
  331.  
  332. <6>UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  333.  
  334. <6>NET: Registered protocol family 1
  335.  
  336. <6>RPC: Registered named UNIX socket transport module.
  337.  
  338. <6>RPC:
  339.  
  340. Registered udp transport module.
  341.  
  342. <6>RPC: Registered tcp transport module.
  343.  
  344. <6>RPC: Registered tcp NFSv4.1 backchannel transport module.
  345.  
  346. <6>audit: initializing
  347.  
  348. netlink socket (disabled)
  349.  
  350. <5>type=2000 audit(0.369:1): initialized
  351.  
  352. <5>VFS: Disk quotas dquot_6.5.2
  353.  
  354. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  355.  
  356.  
  357.  
  358. <5>NFS: Registering the id_resolver key type
  359.  
  360. <6>NTFS driver 2.1.30 [Flags: R/W].
  361.  
  362. <6>fuse init (API version 7.18)
  363.  
  364. <6>msgmni has been set to 611
  365.  
  366. <3>alg: comp:
  367.  
  368. Compression test 1 failed for lzo-generic: output len = 57
  369.  
  370. <6>alg: No test for stdrng (krng)
  371.  
  372. <6>Block layer SCSI generic (bsg) driver version 0.4 loaded
  373.  
  374. (major 253)
  375.  
  376. <6>io scheduler noop registered
  377.  
  378. <6>io scheduler deadline registered
  379.  
  380. <6>io scheduler cfq registered (default)
  381.  
  382. <6>sunxi disp driver loaded (/dev/disp
  383.  
  384. api 1.0)
  385.  
  386. <6>Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  387.  
  388. <3>[uart]: failed to get uart3's used information
  389.  
  390. <6>[uart]: used uart info.: 0x02
  391.  
  392. <6>
  393.  
  394. [uart]: serial probe 1 irq 2 mapbase 0x01c28400
  395.  
  396. <6>sunxi-uart.1: ttyS0 at MMIO 0x1c28400 (irq = 2) is a U6_16550A
  397.  
  398. [ 0.000000] Booting Linux on physical
  399.  
  400. CPU 0
  401. [ 0.000000] Initializing cgroup subsys cpuset
  402. [ 0.000000] Linux version 3.4.67 (h36sa@h36sa-ThinkPad-T61) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu7) ) #5 PREEMPT Tue Jan 7 22:59:42 PST 2014
  403. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  404. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  405. [ 0.000000] Machine: sun4i
  406. [ 0.000000] Memory cut off:
  407. [ 0.000000] MALI : 0x5c000000 - 0x5fffffff ( 64 MB)
  408. [ 0.000000] Ignoring unrecognised tag 0x00000000
  409. [ 0.000000] Memory Reserved:
  410. [ 0.000000] SYS : 0x43000000 - 0x4300ffff ( 64 kB)
  411. [ 0.000000] VE : 0x44000000 - 0x48ffffff ( 80 MB)
  412. [ 0.000000] G2D : 0x49000000 - 0x49ffffff ( 16 MB)
  413. [ 0.000000] LCD : 0x5a000000 - 0x5bffffff ( 32 MB)
  414. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  415. [ 0.000000] sunxi: Allwinner A13 revision A (AW1625/sun5i) detected.
  416. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113792
  417. [ 0.000000] Kernel command line: console=ttyS0,115200 hdmi.audio=EDID:0 disp.screen0_output_mode=EDID:800x480p50 root=/dev/mmcblk0p2 rootwait panic=10
  418. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  419. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  420. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  421. [ 0.000000] Memory: 448MB = 448MB total
  422. [ 0.000000] Memory: 313260k/313260k available, 145492k reserved, 0K highmem
  423. [ 0.000000] Virtual kernel memory layout:
  424. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  425. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  426. [ 0.000000] vmalloc : 0xdc800000 - 0xff000000 ( 552 MB)
  427. [ 0.000000] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
  428. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  429. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  430. [ 0.000000] .text : 0xc0008000 - 0xc07bcd98 (7892 kB)
  431. [ 0.000000] .init : 0xc07bd000 - 0xc07eb000 ( 184 kB)
  432. [ 0.000000] .data : 0xc07ec000 - 0xc0858b10 ( 435 kB)
  433. [ 0.000000] .bss : 0xc0858b34 - 0xc0a144a8 (1775 kB)
  434. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  435. [ 0.000000] NR_IRQS:128
  436. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  437. [ 0.000000] Console: colour dummy device 80x30
  438. [ 0.006007] Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
  439. [ 0.050261] pid_max: default: 32768 minimum: 301
  440. [ 0.053861] Mount-cache hash table entries: 512
  441. [ 0.057777] Initializing cgroup subsys cpuacct
  442. [ 0.061183] Initializing cgroup subsys devices
  443. [ 0.064580] Initializing cgroup subsys freezer
  444. [ 0.067825] Initializing cgroup subsys blkio
  445. [ 0.071383] CPU: Testing write buffer coherency: ok
  446. [ 0.078967] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  447. [ 0.084540] Setting up static identity map for 0x4055dba8 - 0x4055dc00
  448. [ 0.087459] devtmpfs: initialized
  449. [ 0.089728] dummy:
  450. [ 0.093261] NET: Registered protocol family 16
  451. [ 0.098664] hw-breakpoint: debug architecture 0x4 unsupported.
  452. [ 0.102129] Init eGon pin module V2.0
  453. [ 0.107541] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
  454. [ 0.109642] Initialize DMAC OK
  455. [ 0.116970] bio: create slab <bio-0> at 0
  456. [ 0.120317] sunxi_gpio driver init ver 1.3
  457. [ 0.126325] sunxi_gpio_probe can't find script.bin '[gpio_para]' 'gpio_used'
  458. [ 0.131337] gpio-sunxi: probe of gpio-sunxi failed with error -4
  459. [ 0.134375] SCSI subsystem initialized
  460. [ 0.141943] usbcore: registered new interface driver usbfs
  461. [ 0.146259] usbcore: registered new interface driver hub
  462. [ 0.150388] usbcore: registered new device driver usb
  463. [ 0.154041] Linux video capture interface: v2.00
  464. [ 0.159576] Advanced Linux Sound Architecture Driver Version 1.0.25.
  465. [ 0.162459] Bluetooth: Core ver 2.16
  466. [ 0.165893] NET: Registered protocol family 31
  467. [ 0.171221] Bluetooth: HCI device and connection manager initialized
  468. [ 0.175054] Bluetooth: HCI socket layer initialized
  469. [ 0.179067] Bluetooth: L2CAP socket layer initialized
  470. [ 0.182913] Bluetooth: SCO socket layer initialized
  471. [ 0.187587] Switching to clocksource aw_64bits_counter
  472. [ 0.192967] cfg80211: Calling CRDA to update world regulatory domain
  473. [ 0.194991] FS-Cache: Loaded
  474. [ 0.197158] CacheFiles: Loaded
  475. [ 0.204114] [usb_manager]: CONFIG_USB_SW_SUNXI_USB0_OTG
  476. [ 0.208032] [sw_hcd0]: usb host driver initialize........
  477. [ 0.212187] [sw_hcd0]: open_usb_clock
  478. [ 0.236410] [sw_hcd0]: host_init_state = 0
  479. [ 0.237380] [sw_hcd0]: platform is usb host
  480. [ 0.240283] [sw_hcd0]: sw_hcd_host0: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx (X), HB-ISO Tx (X), SoftConn)
  481. [ 0.251464] [sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 38
  482. [ 0.264004] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
  483. [ 0.270719] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
  484. [ 0.273939] hub 1-0:1.0: USB hub found
  485. [ 0.276871] hub 1-0:1.0: 1 port detected
  486. [ 0.280718] wrn: hcd is not enable, need not start hcd
  487. [ 0.281944] [sw_hcd0]: sw_usb_host0_disable start
  488. [ 0.287984] -------sw_hcd0_soft_disconnect---------
  489. [ 0.290950] is_on = 0, hcd0_set_vbus_cnt = 0
  490. [ 0.294000] [sw_hcd_host0]: Set USB Power Off
  491. [ 0.297748] wrn: hcd is not enable, need not stop hcd
  492. [ 0.298758] [sw_hcd0]: close_usb_clock
  493. [ 0.301240] [sw_hcd0]: sw_usb_host0_disable end
  494. [ 0.304430] [sw_udc]: udc_init: version 20080411
  495. [ 0.310667] NET: Registered protocol family 2
  496. [ 0.316764] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  497. [ 0.323331] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  498. [ 0.329054] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
  499. [ 0.334654] TCP: Hash tables configured (established 16384 bind 16384)
  500. [ 0.336856] TCP: reno registered
  501. [ 0.341642] UDP hash table entries: 256 (order: 0, 4096 bytes)
  502. [ 0.346867] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  503. [ 0.350373] NET: Registered protocol family 1
  504. [ 0.355534] RPC: Registered named UNIX socket transport module.
  505. [ 0.359252] RPC: Registered udp transport module.
  506. [ 0.362910] RPC: Registered tcp transport module.
  507. [ 0.368299] RPC: Registered tcp NFSv4.1 backchannel transport module.
  508. [ 0.373429] audit: initializing netlink socket (disabled)
  509. [ 0.377237] type=2000 audit(0.369:1): initialized
  510. [ 0.385822] VFS: Disk quotas dquot_6.5.2
  511. [ 0.391278] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  512. [ 0.396922] NFS: Registering the id_resolver key type
  513. [ 0.401227] NTFS driver 2.1.30 [Flags: R/W].
  514. [ 0.404507] fuse init (API version 7.18)
  515. [ 0.407835] msgmni has been set to 611
  516. [ 0.417991] alg: comp: Compression test 1 failed for lzo-generic: output len = 57
  517. [ 0.421272] alg: No test for stdrng (krng)
  518. [ 0.427868] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  519. [ 0.430845] io scheduler noop registered
  520. [ 0.434070] io scheduler deadline registered
  521. [ 0.437784] io scheduler cfq registered (default)
  522. [ 0.442465] sunxi disp driver loaded (/dev/disp api 1.0)
  523. [ 0.447948] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  524. [ 0.453521] [uart]: failed to get uart3's used information
  525. [ 0.456527] [uart]: used uart info.: 0x02
  526. [ 0.461124] [uart]: serial probe 1 irq 2 mapbase 0x01c28400
  527. [ 0.487209] sunxi-uart.1: ttyS0 at MMIO 0x1c28400 (irq = 2) is a U6_16550A
  528. <6>console [ttyS0] enabled
  529.  
  530. [ 1.174533] console [ttyS0] enabled
  531. <7>G2D: drv_g2d_init
  532.  
  533. <6>G2D: g2dmem: g2d_start=49000000, g2d_size=1000000
  534.  
  535. [ 1.185181] G2D: g2dmem: g2d_start=49000000, g2d_size=1000000
  536. <6>G2D: head:c9000000,tail:ca000000
  537.  
  538. [ 1.194170] G2D: head:c9000000,tail:ca000000
  539. <6>G2D: Module initialized.major:251
  540.  
  541. [ 1.201777] G2D: Module initialized.major:251
  542. <6>brd: module loaded
  543.  
  544. [ 1.208768] brd: module loaded
  545. <6>loop: module loaded
  546.  
  547. [ 1.215938] loop: module loaded
  548. [NAND] nand driver version: 0x2 0x9
  549.  
  550. [ 1.222420] [NAND] nand driver version: 0x2 0x9
  551. <4>Dev Sunxi softw311 nand: part 1, start 32768, size 52768
  552.  
  553. [ 2.634021] Dev Sunxi softw311 nand: part 1, start 32768, size 52768
  554. <4>Dev Sunxi softw311 nand: part 2, start 85536, size 32768
  555.  
  556. [ 2.645749] Dev Sunxi softw311 nand: part 2, start 85536, size 32768
  557. <4>Dev Sunxi softw311 nand: part 3, start 118304, size 65536
  558.  
  559. [ 2.657500] Dev Sunxi softw311 nand: part 3, start 118304, size 65536
  560. <4>Dev Sunxi softw311 nand: part 4, start 183840, size 1228800
  561.  
  562. [ 2.669508] Dev Sunxi softw311 nand: part 4, start 183840, size 1228800
  563. <4>Dev Sunxi softw311 nand: part 5, start 1412640, size 2457600
  564.  
  565. [ 2.681773] Dev Sunxi softw311 nand: part 5, start 1412640, size 2457600
  566. <4>Dev Sunxi softw311 nand: part 6, start 3870240, size 32768
  567.  
  568. [ 2.693951] Dev Sunxi softw311 nand: part 6, start 3870240, size 32768
  569. <4>Dev Sunxi softw311 nand: part 7, start 3903008, size 65536
  570.  
  571. [ 2.705955] Dev Sunxi softw311 nand: part 7, start 3903008, size 65536
  572. <4>Dev Sunxi softw311 nand: part 8, start 3968544, size 524288
  573.  
  574. [ 2.718045] Dev Sunxi softw311 nand: part 8, start 3968544, size 524288
  575. <4>Dev Sunxi softw311 nand: part 9, start 4492832, size 524288
  576.  
  577. [ 2.730223] Dev Sunxi softw311 nand: part 9, start 4492832, size 524288
  578. <4>Dev Sunxi softw311 nand: part 10, start 5017120, size 2765280
  579.  
  580. [ 2.742575] Dev Sunxi softw311 nand: part 10, start 5017120, size 2765280
  581. <6> nand: nanda nandb nandc nandd nande nandf nandg nandh nandi nandj
  582.  
  583. [ 2.755533] nand: nanda nandb nandc nandd nande nandf nandg nandh nandi nandj
  584. [NAND]nand driver, ok.
  585.  
  586. [ 2.766236] [NAND]nand driver, ok.
  587. <4>AHCI is disabled in script.bin
  588.  
  589. [ 2.772902] AHCI is disabled in script.bin
  590. [spi]: sw spi init !!
  591.  
  592. [ 2.779042] [spi]: sw spi init !!
  593. [spi]: sw spi init fetch spi0 uning configuration failed
  594.  
  595. [ 2.787394] [spi]: sw spi init fetch spi0 uning configuration failed
  596. [spi]: sw spi init fetch spi3 uning configuration failed
  597.  
  598. [ 2.798800] [spi]: sw spi init fetch spi3 uning configuration failed
  599. [spi]: Get spi devices number failed
  600.  
  601. [ 2.808463] [spi]: Get spi devices number failed
  602. [spi]: register spi devices board info failed
  603.  
  604. [ 2.817259] [spi]: register spi devices board info failed
  605. <4>spi: cannot find any using configuration for all 4 spi controllers, return directly!
  606.  
  607. [ 2.832192] spi: cannot find any using
  608.  
  609. configuration for all 4 spi controllers, return directly!
  610. <4>emac_init fetch emac using configuration failed
  611.  
  612. [ 2.847250] emac_init fetch emac using configuration failed
  613. <6>emac driver is disabled
  614.  
  615. [ 2.855265] emac driver is disabled
  616. <6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  617.  
  618. [ 2.864295] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  619. <6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  620.  
  621. [ 2.875993] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  622. [sw-ehci1]: open clock
  623.  
  624. [ 2.884460] [sw-ehci1]: open clock
  625. [sw-ehci1]: Set USB Power ON
  626.  
  627. [ 2.910454] [sw-ehci1]: Set USB Power ON
  628. <6>sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  629.  
  630. [ 2.920821] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI)
  631.  
  632. Driver
  633. <6>sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
  634.  
  635. [ 2.934322] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
  636. <6>sw-ehci sw-ehci.1: irq 39, io mem 0x01c14000
  637.  
  638. [ 2.945724] sw-ehci sw-ehci.1: irq 39, io mem 0x01c14000
  639. <6>sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
  640.  
  641. [ 2.967391] sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
  642. ehci_irq: port change detect
  643.  
  644. [ 2.975400] ehci_irq: port change detect
  645. <6>hub 2-0:1.0: USB hub found
  646.  
  647. [ 2.982575] hub 2-0:1.0: USB hub found
  648. <6>hub 2-0:1.0: 1 port detected
  649.  
  650. [ 2.989251] hub 2-0:1.0: 1 port detected
  651. [sw-ohci1]: open clock
  652.  
  653. [ 2.995634] [sw-ohci1]: open clock
  654. <6>sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  655.  
  656. [ 3.025078] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  657. <6>sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
  658.  
  659. [ 3.038224] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
  660. <6>sw-ohci sw-ohci.1: irq 40, io mem 0x01c14400
  661.  
  662. [ 3.049572] sw-ohci sw-ohci.1: irq 40, io mem 0x01c14400
  663. <6>hub 3-0:1.0: USB hub found
  664.  
  665. [ 3.120085] hub 3-0:1.0: USB hub found
  666. <6>hub 3-0:1.0: 1 port detected
  667.  
  668. [ 3.126749] hub 3-0:1.0: 1 port detected
  669. <6>Initializing USB Mass Storage driver...
  670.  
  671. [ 3.134712] Initializing USB Mass Storage driver...
  672. <6>usbcore: registered new interface driver usb-storage
  673.  
  674. [ 3.144697] usbcore: registered new interface driver usb-storage
  675. <6>USB Mass Storage support registered.
  676.  
  677. [ 3.154282] USB Mass Storage support registered.
  678. <6>usbcore: registered new interface driver ums-alauda
  679.  
  680. [ 3.163813] usbcore: registered new interface driver ums-alauda
  681. <6>usbcore: registered new interface driver ums-cypress
  682.  
  683. [ 3.174723] usbcore: registered new interface driver ums-cypress
  684. <6>usbcore: registered new interface driver ums-datafab
  685.  
  686. [ 3.185716] usbcore: registered new interface driver ums-datafab
  687. <6>usbcore: registered new interface driver ums_eneub6250
  688.  
  689. [ 3.196879] usbcore: registered new interface driver ums_eneub6250
  690. <6>usbcore: registered new interface driver ums-freecom
  691.  
  692. [ 3.208138] usbcore: registered new interface driver ums-freecom
  693. <6>usbcore: registered new interface driver ums-isd200
  694.  
  695. [ 3.219057] usbcore: registered new interface driver ums-isd200
  696. <6>usbcore: registered new interface driver ums-jumpshot
  697.  
  698. [ 3.230106] usbcore: registered new interface driver ums-jumpshot
  699. <6>usbcore: registered new interface driver ums-karma
  700.  
  701. [ 3.241010] usbcore: registered new interface driver ums-karma
  702. <6>usbcore: registered new interface driver ums-onetouch
  703.  
  704. [ 3.251935] usbcore: registered new interface driver ums-onetouch
  705. <6>usbcore: registered new interface driver ums-realtek
  706.  
  707. [ 3.263027] usbcore: registered new interface driver ums-realtek
  708. <6>usbcore: registered new interface driver ums-sddr09
  709.  
  710. [ 3.274004] usbcore: registered new interface driver ums-sddr09
  711. <6>usbcore: registered new interface driver ums-sddr55
  712.  
  713. [ 3.284826] usbcore: registered new interface driver ums-sddr55
  714. <6>usbcore: registered new interface driver ums-usbat
  715.  
  716. [ 3.295576] usbcore: registered new interface driver ums-usbat
  717. <6>usbcore: registered new interface driver usbserial
  718.  
  719. [ 3.306297] usbcore: registered new interface driver usbserial
  720. <6>usbserial: USB Serial Driver core
  721.  
  722. [ 3.315448] usbserial: USB Serial Driver core
  723. <6>mousedev: PS/2 mouse device common for all mice
  724.  
  725. [ 3.324475] mousedev: PS/2 mouse device common for all mice
  726. <6>usb 2-1: new high-speed USB device number 2 using sw-ehci
  727.  
  728. [ 3.335483] usb 2-1: new high-speed USB device number 2 using sw-ehci
  729. <3>sunxi-rtc sunxi-rtc: Error: Set LOSC to external failed.
  730.  
  731. [ 3.347729] sunxi-rtc sunxi-rtc: Error: Set LOSC to external failed.
  732. <3>sunxi-rtc sunxi-rtc: Warning: RTC time will be wrong!
  733.  
  734. [ 3.359219] sunxi-rtc sunxi-rtc: Warning: RTC time will be wrong!
  735. <6>sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
  736.  
  737. [ 3.370641] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
  738. <6>i2c /dev entries driver
  739.  
  740. [ 3.379235] i2c /dev entries driver
  741. config i2c gpio with gpio_config api
  742.  
  743. [ 3.386419] config i2c gpio with gpio_config api
  744. <6>axp_mfd 0-0034: AXP (CHIP ID: 0x21) detected
  745.  
  746. [ 3.396676] axp_mfd 0-0034: AXP (CHIP ID: 0x21) detected
  747. <6>I2C: i2c-0: AW16XX I2C adapter
  748.  
  749. [ 3.405588] I2C: i2c-0: AW16XX I2C adapter
  750. <6>I2C: i2c-1: AW16XX I2C adapter
  751.  
  752. [ 3.413028] I2C: i2c-1: AW16XX I2C adapter
  753. <6>I2C: i2c-2: AW16XX I2C adapter
  754.  
  755. [ 3.420408] I2C: i2c-2: AW16XX I2C adapter
  756. <6>lirc_dev: IR Remote Control driver registered, major 249
  757.  
  758. [ 3.430084] lirc_dev: IR Remote Control driver registered, major 249
  759. <6>IR NEC protocol handler initialized
  760.  
  761. [ 3.440025] IR NEC protocol handler initialized
  762. <6>IR RC5(x) protocol handler initialized
  763.  
  764. [ 3.448303] IR RC5(x) protocol handler initialized
  765. <6>IR RC6 protocol handler initialized
  766.  
  767. [ 3.456578] IR RC6 protocol handler initialized
  768. <6>IR JVC protocol handler initialized
  769.  
  770. [ 3.464576] IR JVC protocol handler initialized
  771. <6>IR Sony protocol handler initialized
  772.  
  773. [ 3.472676] IR Sony protocol handler initialized
  774. <6>IR RC5 (streamzap) protocol handler initialized
  775.  
  776. [ 3.481818] IR RC5 (streamzap) protocol handler initialized
  777. <6>IR SANYO protocol handler initialized
  778.  
  779. [ 3.491096] IR SANYO protocol handler initialized
  780. <6>IR MCE Keyboard/mouse protocol handler initialized
  781.  
  782. [ 3.500630] IR MCE Keyboard/mouse protocol handler initialized
  783. <6>IR LIRC bridge handler initialized
  784.  
  785. [ 3.509884] IR LIRC bridge handler initialized
  786. [ace_drv] start!!!
  787.  
  788. [ 3.516080] [ace_drv] start!!!
  789. [ace_drv] init end!!!
  790.  
  791. [ 3.521405] [ace_drv] init end!!!
  792. [pa_drv] start!!!
  793.  
  794. [ 3.526441] [pa_drv] start!!!
  795. [pa_drv] init end!!!
  796.  
  797. [ 3.531657] [pa_drv] init end!!!
  798. <6>Driver for 1-wire Dallas network protocol.
  799.  
  800. [ 3.539052] Driver for 1-wire Dallas network protocol.
  801. <3>invalid gpio pin : -1
  802.  
  803. [ 3.546601] invalid gpio pin : -1
  804. <6>axp20_ldo1: 1300 mV
  805.  
  806. [ 3.552256] axp20_ldo1: 1300 mV
  807. <6>axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  808.  
  809. [ 3.561556] axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  810. <6>axp20_ldo3: 700 <--> 3500 mV at 3300 mV
  811.  
  812. [ 3.571861] axp20_ldo3: 700 <--> 3500 mV at 3300 mV
  813. <6>axp20_ldo4: 1250 <--> 3300 mV at 3300 mV
  814.  
  815. [ 3.582177] axp20_ldo4: 1250 <--> 3300 mV at 3300 mV
  816. <6>axp20_buck2: 700 <--> 2275 mV at 1400 mV
  817.  
  818. [ 3.592356] axp20_buck2: 700 <--> 2275 mV at 1400 mV
  819. <6>axp20_buck3: 700 <--> 3500 mV at 1200 mV
  820.  
  821. [ 3.602759] axp20_buck3: 700 <--> 3500 mV at 1200 mV
  822. <6>axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  823.  
  824. [ 3.612628] axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  825. <6>input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input0
  826.  
  827. [ 3.627329] input: axp20-supplyer as
  828.  
  829. /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input0
  830. <4>axp20_ldo2: Failed to create debugfs directory
  831.  
  832. [ 3.655154] axp20_ldo2: Failed to create debugfs directory
  833. <6>Bluetooth: HCI UART driver ver 2.2
  834.  
  835. [ 3.664592] Bluetooth: HCI UART driver ver 2.2
  836. <6>Bluetooth: HCI H4 protocol initialized
  837.  
  838. [ 3.672803] Bluetooth: HCI H4 protocol initialized
  839. <6>Bluetooth: HCI BCSP protocol initialized
  840.  
  841. [ 3.681512] Bluetooth: HCI BCSP protocol initialized
  842. <6>Bluetooth: HCILL protocol initialized
  843.  
  844. [ 3.690134] Bluetooth: HCILL protocol initialized
  845. <6>cpuidle: using governor ladder
  846.  
  847. [ 3.697891] cpuidle: using governor ladder
  848. <6>cpuidle: using governor menu
  849.  
  850. [ 3.704851] cpuidle: using governor menu
  851. [mmc_pm]: no sdio card used in configuration
  852.  
  853. [ 3.712820] [mmc_pm]: no sdio card used in configuration
  854. [mmc]: sunximmc_init
  855.  
  856. [ 3.720059] [mmc]: sunximmc_init
  857. sunximmc_init fetch mmc3 using configuration failed
  858.  
  859. [ 3.727980] sunximmc_init fetch mmc3 using configuration failed
  860. [mmc]: sunxi mmc controller using config : 0x1
  861.  
  862. [ 3.738081] [mmc]: sunxi mmc controller using config : 0x1
  863. [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
  864.  
  865. [ 3.748473] [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
  866. [mmc]: mmc 0 power off !!
  867.  
  868. [ 3.757297] [mmc]: mmc 0 power off !!
  869. [mmc]: mmc0 Probe: base:0xf1c0f000 irq:32 dma:0 pdes:0xd9aa4000, ret 0.
  870.  
  871. [ 3.768485] [mmc]: mmc0 Probe: base:0xf1c0f000 irq:32 dma:0 pdes:0xd9aa4000, ret
  872.  
  873. 0.
  874. <6>sunxi_leds driver init
  875.  
  876. [ 3.778602] sunxi_leds driver init
  877. <6>sunxi leds can't find script data '[leds_para]' 'leds_used'
  878.  
  879. [ 3.787558] sunxi leds can't find script data '[leds_para]' 'leds_used'
  880. <6>usbcore: registered new interface driver usbhid
  881.  
  882. [ 3.799190] usbcore: registered new interface driver usbhid
  883. <6>usbhid: USB HID core driver
  884.  
  885. [ 3.807567] usbhid: USB HID core driver
  886. <6>logger: created 256K log 'log_main'
  887.  
  888. [ 3.815222] logger: created 256K log 'log_main'
  889. <6>logger: created 256K log 'log_events'
  890.  
  891. [ 3.823524] logger: created 256K log 'log_events'
  892. <6>logger: created 256K log 'log_radio'
  893.  
  894. [ 3.831878] logger: created 256K log 'log_radio'
  895. <6>logger: created 256K log 'log_system'
  896.  
  897. [ 3.840248] logger: created 256K log 'log_system'
  898. <4>sunxi-codec: probe of sunxi-codec failed with error -16
  899.  
  900. [ 3.850797] sunxi-codec: probe of sunxi-codec failed with error -16
  901. <6>IPv4 over IPv4 tunneling driver
  902.  
  903. [ 3.860644] IPv4 over IPv4 tunneling driver
  904. <6>TCP: cubic registered
  905.  
  906. [ 3.867612] TCP: cubic registered
  907. <6>Initializing XFRM netlink socket
  908.  
  909. [ 3.874142] Initializing XFRM netlink socket
  910. <6>NET: Registered protocol family 17
  911.  
  912. [ 3.881864] NET: Registered protocol family 17
  913. <6>NET: Registered protocol family 15
  914.  
  915. [ 3.889743] NET: Registered protocol family 15
  916. <6>Bluetooth: RFCOMM TTY layer initialized
  917.  
  918. [ 3.898226] Bluetooth: RFCOMM TTY layer initialized
  919. <6>Bluetooth: RFCOMM socket layer initialized
  920.  
  921. [ 3.907286] Bluetooth: RFCOMM socket layer initialized
  922. <6>Bluetooth: RFCOMM ver 1.11
  923.  
  924. [ 3.915115] Bluetooth: RFCOMM ver 1.11
  925. <6>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  926.  
  927. [ 3.923139] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  928. <6>Bluetooth: BNEP filters: protocol multicast
  929.  
  930. [ 3.932629] Bluetooth: BNEP filters: protocol multicast
  931. <6>8021q: 802.1Q VLAN Support v1.8
  932.  
  933. [ 3.941031] 8021q: 802.1Q VLAN Support v1.8
  934. [mmc_pm]: No sdio card, please check your config !!
  935.  
  936. [ 3.949852] [mmc_pm]: No sdio card, please check your config !!
  937. <5>Registering the dns_resolver key type
  938.  
  939. [ 3.959440] Registering the dns_resolver key type
  940. <6>VFP support v0.3: [ 3.966132] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  941.  
  942. implementor 41 architecture 3 part 30 variant c
  943.  
  944. rev 3
  945. <5>Registering SWP/SWPB emulation handler
  946.  
  947. [ 3.982353] Registering SWP/SWPB emulation handler
  948. <4>axp20_buck2: Failed to create debugfs directory
  949.  
  950. [ 3.991703] axp20_buck2: Failed to create debugfs directory
  951. <6>registered taskstats version 1
  952.  
  953. [ 4.001138] registered taskstats version 1
  954. [mmc]: mmc 0 detect change, present 1
  955.  
  956. [ 4.756412] [mmc]: mmc 0 detect change, present 1
  957. <6>Console: switching to colour frame buffer device 100x30
  958.  
  959. [ 4.860210] Console: switching to colour frame buffer device 100x30
  960. <6>I2C: i2c-3: HDMI I2C adapter
  961.  
  962. [ 4.878011] I2C: i2c-3: HDMI I2C adapter
  963. <4>axp20_buck3: incomplete constraints, leaving on
  964.  
  965. [ 4.908171] axp20_buck3: incomplete constraints, leaving on
  966. <4>axp20_buck2: incomplete constraints, leaving on
  967.  
  968. [ 4.918542] axp20_buck2: incomplete constraints, leaving on
  969. <4>axp20_ldo4: incomplete constraints, leaving on
  970.  
  971. [ 4.928808] axp20_ldo4: incomplete constraints, leaving on
  972. <4>axp20_ldo3: incomplete constraints, leaving on
  973.  
  974. [ 4.947669] axp20_ldo3: incomplete constraints, leaving on
  975. <4>axp20_ldo2: incomplete constraints, leaving on
  976.  
  977. [ 4.967663] axp20_ldo2: incomplete constraints, leaving on
  978. <6>sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:00:00 UTC (1262304000)
  979.  
  980. [ 4.989127] sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01
  981.  
  982. 00:00:00 UTC (1262304000)
  983. <6>ALSA device list:
  984.  
  985. [ 4.999664] ALSA device list:
  986. <6> No soundcards found.
  987.  
  988. [ 5.004978] No soundcards found.
  989. <6>Waiting for root device /dev/mmcblk0p2...
  990.  
  991. [ 5.012831] Waiting for root device /dev/mmcblk0p2...
  992. [mmc]: mmc 0 power on !!
  993.  
  994. [ 5.055293] [mmc]: mmc 0 power on !!
  995. [mmc]: sdxc_request_done(L1118): [ 5.096669] [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 52, RTO !!
  996.  
  997. smc 0 err, cmd 52, RTO !!
  998. [mmc]: sdxc_request_done(L1118): [ 5.109416] [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 52, RTO !!
  999.  
  1000. smc 0 err, cmd 52, RTO !!
  1001. [mmc]: sdxc_request_done(L1118): [ 5.125790] [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 5, RTO !!
  1002.  
  1003. smc 0 err, cmd 5, RTO !!
  1004. [mmc]: sdxc_request_done(L1118): [ 5.138396] [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 5, RTO !!
  1005.  
  1006. smc 0 err, cmd 5, RTO !!
  1007. [mmc]: sdxc_request_done(L1118): [ 5.150956] [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 5, RTO !!
  1008.  
  1009. smc 0 err, cmd 5, RTO !!
  1010. [mmc]: sdxc_request_done(L1118): [ 5.163509] [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 5, RTO !!
  1011.  
  1012. smc 0 err, cmd 5, RTO !!
  1013. <6>mmc0: new high speed SD card at address 0002
  1014.  
  1015. [ 5.214079] mmc0: new high speed SD card at address 0002
  1016. <6>mmcblk0: mmc0:0002 00000 1.86 GiB
  1017.  
  1018. [ 5.223180] mmcblk0: mmc0:0002 00000 1.86 GiB
  1019. <6> mmcblk0: p1 p2
  1020.  
  1021. [ 5.233027] mmcblk0: p1 p2
  1022. <6>kjournald starting. Commit interval 5 seconds
  1023.  
  1024. [ 5.255924] kjournald starting. Commit interval 5 seconds
  1025. <6>EXT3-fs (mmcblk0p2): using internal journal
  1026.  
  1027. [ 5.265714] EXT3-fs (mmcblk0p2): using internal journal
  1028. <6>EXT3-fs (mmcblk0p2): recovery complete
  1029.  
  1030. [ 5.274734] EXT3-fs (mmcblk0p2): recovery complete
  1031. <6>EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
  1032.  
  1033. [ 5.285361] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
  1034. <6>VFS: Mounted root (ext3 filesystem) on device 179:2.
  1035.  
  1036. [ 5.297234] VFS: Mounted root (ext3 filesystem) on device 179:2.
  1037. <6>devtmpfs: mounted
  1038.  
  1039. [ 5.310363] devtmpfs: mounted
  1040. <6>Freeing init memory: 184K
  1041.  
  1042. [ 5.316226] Freeing init memory: 184K
  1043. [mmc]: sdxc_request_done(L1118): [ 5.365014] [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 18, FE !!
  1044.  
  1045. smc 0 err, cmd 18, FE !!
  1046. [mmc]: sdxc_request_done(L1122): [ 5.376819] [mmc]: sdxc_request_done(L1122): In data read operation
  1047.  
  1048. In data read operation
  1049. [mmc]: found data error, need to send stop command !!
  1050.  
  1051. [ 5.389974] [mmc]: found data error, need to send stop command !!
  1052. [mmc]: sdxc_send_manual_stop(L896): [ 5.399216] [mmc]: sdxc_send_manual_stop(L896): sdc 0 send stop command failed
  1053.  
  1054. sdc 0 send stop command failed
  1055. <3>mmcblk0: unknown error 110 sending read/write command, card status 0x900
  1056.  
  1057. [ 5.415982] mmcblk0: unknown error 110 sending read/write command, card
  1058.  
  1059. status 0x900
  1060. <3>end_request: I/O error, dev mmcblk0, sector 3352408
  1061.  
  1062. [ 5.428621] end_request: I/O error, dev mmcblk0, sector 3352408
  1063. <3>end_request: I/O error, dev mmcblk0, sector 3352416
  1064.  
  1065. [ 5.439399] end_request: I/O error, dev mmcblk0, sector 3352416
  1066. <3>end_request: I/O error, dev mmcblk0, sector 3352424
  1067.  
  1068. [ 5.450174] end_request: I/O error, dev mmcblk0, sector 3352424
  1069. <3>end_request: I/O error, dev mmcblk0, sector 3352432
  1070.  
  1071. [ 5.460947] end_request: I/O error, dev mmcblk0, sector 3352432
  1072. <3>end_request: I/O error, dev mmcblk0, sector 3352440
  1073.  
  1074. [ 5.471722] end_request: I/O error, dev mmcblk0, sector 3352440
  1075. <3>end_request: I/O error, dev mmcblk0, sector 3352448
  1076.  
  1077. [ 5.482496] end_request: I/O error, dev mmcblk0, sector 3352448
  1078. <3>end_request: I/O error, dev mmcblk0, sector 3352456
  1079.  
  1080. [ 5.493270] end_request: I/O error, dev mmcblk0, sector 3352456
  1081. <3>end_request: I/O error, dev mmcblk0, sector 3352464
  1082.  
  1083. [ 5.504044] end_request: I/O error, dev mmcblk0, sector 3352464
  1084. <3>end_request: I/O error, dev mmcblk0, sector 3352472
  1085.  
  1086. [ 5.514819] end_request: I/O error, dev mmcblk0, sector 3352472
  1087. <3>end_request: I/O error, dev mmcblk0, sector 3352480
  1088.  
  1089. [ 5.525593] end_request: I/O error, dev mmcblk0, sector 3352480
  1090. <3>end_request: I/O error, dev mmcblk0, sector 3352488
  1091.  
  1092. [ 5.536367] end_request: I/O error, dev mmcblk0, sector 3352488
  1093. [mmc]: sdxc_request_done(L1118): [ 5.552104] [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 18, FE !!
  1094.  
  1095. smc 0 err, cmd 18, FE !!
  1096. [mmc]: sdxc_request_done(L1122): [ 5.563885] [mmc]: sdxc_request_done(L1122): In data read operation
  1097.  
  1098. In data read operation
  1099. [mmc]: found data error, need to send stop command !!
  1100.  
  1101. [ 5.577039] [mmc]: found data error, need to send stop command !!
  1102. [mmc]: sdxc_send_manual_stop(L896): [ 5.586281] [mmc]: sdxc_send_manual_stop(L896): sdc 0 send stop command failed
  1103.  
  1104. sdc 0 send stop command failed
  1105.  
  1106.  
  1107.  
  1108. insmod_device_driver
  1109.  
  1110.  
  1111. [ 5.598752]
  1112. [ 5.598756]
  1113. [ 5.598758] insmod_device_driver
  1114. [ 5.598762]
  1115. <3>mmcblk0: unknown error 110 sending read/write command, card status 0x900
  1116.  
  1117. [ 5.613169] mmcblk0: unknown error 110 sending read/write command, card
  1118.  
  1119. status 0x900
  1120. [sw_udc]: [ 5.633870] [sw_udc]: sw_usb_device_enable start
  1121.  
  1122. sw_usb_device_enable start
  1123. [sw_udc]: [ 5.641802] [sw_udc]: <3>end_request: I/O error, dev mmcblk0, sector 3352336
  1124. [ 5.648871] end_request: I/O error, dev mmcblk0, sector 3352336
  1125. <3>end_request: I/O error, dev mmcblk0, sector 3352344
  1126.  
  1127. [ 5.659830] end_request: I/O error, dev mmcblk0, sector 3352344
  1128. usb_vbase = 0xf1c13000
  1129.  
  1130. [ 5.675170] usb_vbase = 0xf1c13000
  1131. [sw_udc]: [ 5.679528] [sw_udc]: sram_vbase = 0xf1c00000
  1132.  
  1133. sram_vbase = 0xf1c00000
  1134. [sw_udc]: [ 5.703887] [sw_udc]: open_usb_clock
  1135.  
  1136. open_usb_clock
  1137. [mmc]: sdxc_request_done(L1118): [ 5.736085] [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 18, FE !!
  1138.  
  1139. smc 0 err, cmd 18, FE !!
  1140. [mmc]: sdxc_request_done(L1122): [ 5.747861] [mmc]: sdxc_request_done(L1122): In data read operation
  1141.  
  1142. In data read operation
  1143. [mmc]: found data error, need to send stop command !!
  1144.  
  1145. [ 5.761020] [mmc]: found data error, need to send stop command !!
  1146. [mmc]: sdxc_send_manual_stop(L896): [ 5.770264] [mmc]: sdxc_send_manual_stop(L896): sdc 0 send stop command failed
  1147.  
  1148. sdc 0 send stop command failed
  1149. <3>mmcblk0: unknown error 110 sending read/write command, card status 0x900
  1150.  
  1151. [ 5.786993] mmcblk0: unknown error 110 sending read/write command, card
  1152.  
  1153. status 0x900
  1154. <3>end_request: I/O error, dev mmcblk0, sector 989760
  1155.  
  1156. [ 5.817771] end_request: I/O error, dev mmcblk0, sector 989760
  1157. <3>end_request: I/O error, dev mmcblk0, sector 989768
  1158.  
  1159. [ 5.828374] end_request: I/O error, dev mmcblk0, sector 989768
  1160. <3>end_request: I/O error, dev mmcblk0, sector 989776
  1161.  
  1162. [ 5.838976] end_request: I/O error, dev mmcblk0, sector 989776
  1163. udc->driver is null, udc is need not start
  1164.  
  1165. [ 5.884528] udc->driver is null, udc is need not start
  1166. [sw_udc]: [ 5.890692] [sw_udc]: sw_usb_device_enable end
  1167.  
  1168. sw_usb_device_enable end
  1169. [mmc]: sdxc_request_done(L1118): [ 5.904777] [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 18, FE !!
  1170.  
  1171. smc 0 err, cmd 18, FE !!
  1172. [mmc]: sdxc_request_done(L1122): [ 5.916568] [mmc]: sdxc_request_done(L1122): In data read operation
  1173.  
  1174. In data read operation
  1175. [mmc]: found data error, need to send stop command !!
  1176.  
  1177. [ 5.929722] [mmc]: found data error, need to send stop command !!
  1178. [mmc]: sdxc_send_manual_stop(L896): [ 5.938962] [mmc]: sdxc_send_manual_stop(L896): sdc 0 send stop command failed
  1179.  
  1180. sdc 0 send stop command failed
  1181. <3>mmcblk0: unknown error 110 sending read/write command, card status 0x900
  1182.  
  1183. [ 5.955719] mmcblk0: unknown error 110 sending read/write command, card
  1184.  
  1185. status 0x900
  1186. <3>end_request: I/O error, dev mmcblk0, sector 3345216
  1187.  
  1188. [ 5.968349] end_request: I/O error, dev mmcblk0, sector 3345216
  1189. <3>end_request: I/O error, dev mmcblk0, sector 3345224
  1190.  
  1191. [ 5.979129] end_request: I/O error, dev mmcblk0, sector 3345224
  1192. <3>end_request: I/O error, dev mmcblk0, sector 3345232
  1193.  
  1194. [ 5.989904] end_request: I/O error, dev mmcblk0, sector 3345232
  1195. <3>end_request: I/O error, dev mmcblk0, sector 3345240
  1196.  
  1197. [ 6.000677] end_request: I/O error, dev mmcblk0, sector 3345240
  1198. [mmc]: sdxc_request_done(L1118): [ 6.024705] [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 18, FE !!
  1199.  
  1200. smc 0 err, cmd 18, FE !!
  1201. [mmc]: sdxc_request_done(L1122): [ 6.036476] [mmc]: sdxc_request_done(L1122): In data read operation
  1202.  
  1203. In data read operation
  1204. [mmc]: found data error, need to send stop command !!
  1205.  
  1206. [ 6.049626] [mmc]: found data error, need to send stop command !!
  1207. [mmc]: sdxc_send_manual_stop(L896): [ 6.058857] [mmc]: sdxc_send_manual_stop(L896): sdc 0 send stop command failed
  1208.  
  1209. sdc 0 send stop command failed
  1210. <3>mmcblk0: unknown error 110 sending read/write command, card status 0x900
  1211.  
  1212. [ 6.075669] mmcblk0: unknown error 110 sending read/write command, card
  1213.  
  1214. status 0x900
  1215. <3>end_request: I/O error, dev mmcblk0, sector 3345408
  1216.  
  1217. [ 6.088299] end_request: I/O error, dev mmcblk0, sector 3345408
  1218. <3>end_request: I/O error, dev mmcblk0, sector 3345416
  1219.  
  1220. [ 6.099080] end_request: I/O error, dev mmcblk0, sector 3345416
  1221. <3>end_request: I/O error, dev mmcblk0, sector 3345424
  1222.  
  1223. [ 6.109860] end_request: I/O error, dev mmcblk0, sector 3345424
  1224. <3>end_request: I/O error, dev mmcblk0, sector 3345432
  1225.  
  1226. [ 6.120637] end_request: I/O error, dev mmcblk0, sector 3345432
  1227. <3>end_request: I/O error, dev mmcblk0, sector 3345440
  1228.  
  1229. [ 6.131415] end_request: I/O error, dev mmcblk0, sector 3345440
  1230. <3>end_request: I/O error, dev mmcblk0, sector 3345448
  1231.  
  1232. [ 6.142193] end_request: I/O error, dev mmcblk0, sector 3345448
  1233. <3>end_request: I/O error, dev mmcblk0, sector 3345456
  1234.  
  1235. [ 6.152972] end_request: I/O error, dev mmcblk0, sector 3345456
  1236. <3>end_request: I/O error, dev mmcblk0, sector 3345464
  1237.  
  1238. [ 6.163751] end_request: I/O error, dev mmcblk0, sector 3345464
  1239. <3>end_request: I/O error, dev mmcblk0, sector 3345472
  1240.  
  1241. [ 6.174529] end_request: I/O error, dev mmcblk0, sector 3345472
  1242. <3>end_request: I/O error, dev mmcblk0, sector 3345480
  1243.  
  1244. [ 6.185308] end_request: I/O error, dev mmcblk0, sector 3345480
  1245. <3>end_request: I/O error, dev mmcblk0, sector 3345488
  1246.  
  1247. [ 6.196086] end_request: I/O error, dev mmcblk0, sector 3345488
  1248. <3>end_request: I/O error, dev mmcblk0, sector 3345496
  1249.  
  1250. [ 6.206863] end_request: I/O error, dev mmcblk0, sector 3345496
  1251. <3>end_request: I/O error, dev mmcblk0, sector 3345504
  1252.  
  1253. [ 6.217642] end_request: I/O error, dev mmcblk0, sector 3345504
  1254. <3>end_request: I/O error, dev mmcblk0, sector 3345512
  1255.  
  1256. [ 6.228420] end_request: I/O error, dev mmcblk0, sector 3345512
  1257. <3>end_request: I/O error, dev mmcblk0, sector 3345520
  1258.  
  1259. [ 6.239198] end_request: I/O error, dev mmcblk0, sector 3345520
  1260. <3>end_request: I/O error, dev mmcblk0, sector 3345528
  1261.  
  1262. [ 6.249977] end_request: I/O error, dev mmcblk0, sector 3345528
  1263. <3>end_request: I/O error, dev mmcblk0, sector 3345536
  1264.  
  1265. [ 6.260755] end_request: I/O error, dev mmcblk0, sector 3345536
  1266. <0>Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
  1267.  
  1268.  
  1269. [ 6.276229] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
  1270. [ 6.276241]
  1271. [<c0014c98>] (unwind_backtrace+0x0/0x134) from [<c0554a18>] (panic+0x94/0x1b8)
  1272.  
  1273. [ 6.292364] [<c0014c98>] (unwind_backtrace+0x0/0x134) from [<c0554a18>]
  1274.  
  1275. (panic+0x94/0x1b8)
  1276. [<c0554a18>] (panic+0x94/0x1b8) from [<c0036b84>] (do_exit+0x6dc/0x78c)
  1277.  
  1278. [ 6.306982] [<c0554a18>] (panic+0x94/0x1b8) from [<c0036b84>] (do_exit
  1279.  
  1280. +0x6dc/0x78c)
  1281. [<c0036b84>] (do_exit+0x6dc/0x78c) from [<c0036ca0>] (do_group_exit+0x40/0xc4)
  1282.  
  1283. [ 6.321587] [<c0036b84>] (do_exit+0x6dc/0x78c) from [<c0036ca0>]
  1284.  
  1285. (do_group_exit+0x40/0xc4)
  1286. [<c0036ca0>] (do_group_exit+0x40/0xc4) from [<c0041444>] (get_signal_to_deliver+0x194/0x590)
  1287.  
  1288. [ 6.338029] [<c0036ca0>] (do_group_exit+0x40/0xc4) from
  1289.  
  1290. [<c0041444>] (get_signal_to_deliver+0x194/0x590)
  1291. [<c0041444>] (get_signal_to_deliver+0x194/0x590) from [<c0011c88>] (do_signal+0x68/0x54c)
  1292.  
  1293. [ 6.355415] [<c0041444>] (get_signal_to_deliver+0x194/0x590)
  1294.  
  1295. from [<c0011c88>] (do_signal+0x68/0x54c)
  1296. [<c0011c88>] (do_signal+0x68/0x54c) from [<c0012494>] (do_notify_resume+0x68/0x74)
  1297.  
  1298. [ 6.371926] [<c0011c88>] (do_signal+0x68/0x54c) from [<c0012494>]
  1299.  
  1300. (do_notify_resume+0x68/0x74)
  1301. [<c0012494>] (do_notify_resume+0x68/0x74) from [<c000ea98>] (work_pending+0x24/0x28)
  1302.  
  1303. [ 6.388003] [<c0012494>] (do_notify_resume+0x68/0x74) from
  1304.  
  1305. [<c000ea98>] (work_pending+0x24/0x28)
  1306. <0>Rebooting in 10 seconds..[ 6.399222] Rebooting in 10 seconds..
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement