Advertisement
Guest User

Untitled

a guest
Nov 10th, 2019
110
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 20.75 KB | None
  1. [ 0.000000] Linux version 4.14.151 (builder@buildhost) (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r10649-c4fdb377a2)) #0 Tue Nov 5 23:26:40 2019
  2. [ 0.000000] bootconsole [early0] enabled
  3. [ 0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
  4. [ 0.000000] MIPS: machine is TP-Link Archer C7 v2
  5. [ 0.000000] SoC: Qualcomm Atheros QCA9558 ver 1 rev 0
  6. [ 0.000000] Determined physical RAM map:
  7. [ 0.000000] memory: 08000000 @ 00000000 (usable)
  8. [ 0.000000] Initrd not found or empty - disabling initrd
  9. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  10. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  11. [ 0.000000] Zone ranges:
  12. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
  13. [ 0.000000] Movable zone start for each node
  14. [ 0.000000] Early memory node ranges
  15. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
  16. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
  17. [ 0.000000] On node 0 totalpages: 32768
  18. [ 0.000000] free_area_init_node: node 0, pgdat 804f9f90, node_mem_map 81008c20
  19. [ 0.000000] Normal zone: 256 pages used for memmap
  20. [ 0.000000] Normal zone: 0 pages reserved
  21. [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
  22. [ 0.000000] random: get_random_bytes called from 0x804fd740 with crng_init=0
  23. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  24. [ 0.000000] pcpu-alloc: [0] 0
  25. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512
  26. [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
  27. [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  28. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  29. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  30. [ 0.000000] Writing ErrCtl register=00000000
  31. [ 0.000000] Readback ErrCtl register=00000000
  32. [ 0.000000] Memory: 123304K/131072K available (4025K kernel code, 159K rwdata, 532K rodata, 1228K init, 211K bss, 7768K reserved, 0K cma-reserved)
  33. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  34. [ 0.000000] NR_IRQS: 51
  35. [ 0.000000] CPU clock: 720.000 MHz
  36. [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5309056796 ns
  37. [ 0.000008] sched_clock: 32 bits at 360MHz, resolution 2ns, wraps every 5965232126ns
  38. [ 0.008297] Calibrating delay loop... 358.80 BogoMIPS (lpj=1794048)
  39. [ 0.074984] pid_max: default: 32768 minimum: 301
  40. [ 0.080063] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  41. [ 0.087103] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  42. [ 0.098238] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  43. [ 0.108733] futex hash table entries: 256 (order: -1, 3072 bytes)
  44. [ 0.115288] pinctrl core: initialized pinctrl subsystem
  45. [ 0.122717] NET: Registered protocol family 16
  46. [ 0.130042] PCI host bridge /ahb/apb/pcie-controller@18250000 ranges:
  47. [ 0.136944] MEM 0x0000000012000000..0x0000000013ffffff
  48. [ 0.142499] IO 0x0000000000000001..0x0000000000000001
  49. [ 0.162744] PCI host bridge to bus 0000:00
  50. [ 0.167109] pci_bus 0000:00: root bus resource [mem 0x12000000-0x13ffffff]
  51. [ 0.174455] pci_bus 0000:00: root bus resource [io 0x0001]
  52. [ 0.180383] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
  53. [ 0.187609] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  54. [ 0.196066] pci 0000:00:00.0: [168c:003c] type 00 class 0x028000
  55. [ 0.196120] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
  56. [ 0.196174] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
  57. [ 0.196247] pci 0000:00:00.0: supports D1 D2
  58. [ 0.196424] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
  59. [ 0.196445] pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit]
  60. [ 0.204269] pci 0000:00:00.0: BAR 6: assigned [mem 0x12200000-0x1220ffff pref]
  61. [ 0.214351] clocksource: Switched to clocksource MIPS
  62. [ 0.220562] NET: Registered protocol family 2
  63. [ 0.225950] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  64. [ 0.233368] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  65. [ 0.240175] TCP: Hash tables configured (established 1024 bind 1024)
  66. [ 0.247048] UDP hash table entries: 256 (order: 0, 4096 bytes)
  67. [ 0.253271] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  68. [ 0.260167] NET: Registered protocol family 1
  69. [ 0.264866] PCI: CLS 0 bytes, default 32
  70. [ 0.267264] Crashlog allocated RAM at address 0x3f00000
  71. [ 0.273846] workingset: timestamp_bits=30 max_order=15 bucket_order=0
  72. [ 0.284913] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  73. [ 0.291116] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  74. [ 0.309103] io scheduler noop registered
  75. [ 0.313276] io scheduler deadline registered (default)
  76. [ 0.319061] ar7200-usb-phy 18030000.usb-phy0: phy reset is missing
  77. [ 0.325718] ar7200-usb-phy 18030010.usb-phy1: phy reset is missing
  78. [ 0.333892] pinctrl-single 1804002c.pinmux: 544 pins at pa b804002c size 68
  79. [ 0.341820] gpio-export gpio-export: 2 gpio(s) exported
  80. [ 0.348138] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  81. [ 0.356937] console [ttyS0] disabled
  82. [ 0.360767] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 2500000) is a 16550A
  83. [ 0.369981] console [ttyS0] enabled
  84. [ 0.377409] bootconsole [early0] disabled
  85. [ 0.403952] m25p80 spi0.0: w25q128 (16384 Kbytes)
  86. [ 0.408802] 3 fixed-partitions partitions found on MTD device spi0.0
  87. [ 0.415261] Creating 3 MTD partitions on "spi0.0":
  88. [ 0.420129] 0x000000000000-0x000000020000 : "u-boot"
  89. [ 0.425838] 0x000000020000-0x000000ff0000 : "firmware"
  90. [ 0.432007] 2 tplink-fw partitions found on MTD device firmware
  91. [ 0.438050] Creating 2 MTD partitions on "firmware":
  92. [ 0.443096] 0x000000000000-0x0000001855a5 : "kernel"
  93. [ 0.448752] 0x0000001855a8-0x000000fd0000 : "rootfs"
  94. [ 0.454399] mtd: device 3 (rootfs) set to be root filesystem
  95. [ 0.460178] 1 squashfs-split partitions found on MTD device rootfs
  96. [ 0.466477] 0x000000440000-0x000000fd0000 : "rootfs_data"
  97. [ 0.472568] 0x000000ff0000-0x000001000000 : "art"
  98. [ 0.478945] libphy: Fixed MDIO Bus: probed
  99. [ 0.826061] libphy: ag71xx_mdio: probed
  100. [ 0.832569] switch0: Atheros AR8327 rev. 4 switch registered on mdio-bus.0
  101. [ 1.483658] ag71xx 19000000.eth: connected to PHY at mdio-bus.0:00 [uid=004dd034, driver=Atheros AR8216/AR8236/AR8316]
  102. [ 1.495045] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: rgmii
  103. [ 1.835939] ag71xx 1a000000.eth: connected to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY]
  104. [ 1.845556] eth1: Atheros AG71xx at 0xba000000, irq 5, mode: sgmii
  105. [ 1.854037] NET: Registered protocol family 10
  106. [ 1.863036] Segment Routing with IPv6
  107. [ 1.866890] NET: Registered protocol family 17
  108. [ 1.871440] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  109. [ 1.884599] 8021q: 802.1Q VLAN Support v1.8
  110. [ 1.891083] hctosys: unable to open rtc device (rtc0)
  111. [ 1.903210] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
  112. [ 1.914819] Freeing unused kernel memory: 1228K
  113. [ 1.919418] This architecture does not have kernel memory protection.
  114. [ 2.584365] random: fast init done
  115. [ 2.626924] init: Console is alive
  116. [ 2.630543] init: - watchdog -
  117. [ 3.813908] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  118. [ 4.077654] usbcore: registered new interface driver usbfs
  119. [ 4.083306] usbcore: registered new interface driver hub
  120. [ 4.088802] usbcore: registered new device driver usb
  121. [ 4.099057] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  122. [ 4.107028] ehci-platform: EHCI generic platform driver
  123. [ 4.112554] ehci-platform 1b000000.usb: EHCI Host Controller
  124. [ 4.118364] ehci-platform 1b000000.usb: new USB bus registered, assigned bus number 1
  125. [ 4.126393] ehci-platform 1b000000.usb: irq 14, io mem 0x1b000000
  126. [ 4.154375] ehci-platform 1b000000.usb: USB 2.0 started, EHCI 1.00
  127. [ 4.161309] hub 1-0:1.0: USB hub found
  128. [ 4.165526] hub 1-0:1.0: 1 port detected
  129. [ 4.170022] ehci-platform 1b400000.usb: EHCI Host Controller
  130. [ 4.175837] ehci-platform 1b400000.usb: new USB bus registered, assigned bus number 2
  131. [ 4.183853] ehci-platform 1b400000.usb: irq 15, io mem 0x1b400000
  132. [ 4.214383] ehci-platform 1b400000.usb: USB 2.0 started, EHCI 1.00
  133. [ 4.221350] hub 2-0:1.0: USB hub found
  134. [ 4.225483] hub 2-0:1.0: 1 port detected
  135. [ 4.230413] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  136. [ 4.248137] init: - preinit -
  137. [ 5.410624] random: jshn: uninitialized urandom read (4 bytes read)
  138. [ 5.658772] random: jshn: uninitialized urandom read (4 bytes read)
  139. [ 5.824430] random: jshn: uninitialized urandom read (4 bytes read)
  140. [ 7.086457] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
  141. [ 7.092436] IPv6: ADDRCONF(NETDEV_UP): eth1.1: link is not ready
  142. [ 7.133760] urandom_read: 4 callbacks suppressed
  143. [ 7.133766] random: procd: uninitialized urandom read (4 bytes read)
  144. [ 8.115488] eth1: link up (1000Mbps/Full duplex)
  145. [ 8.120198] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
  146. [ 8.126873] IPv6: ADDRCONF(NETDEV_CHANGE): eth1.1: link becomes ready
  147. [ 10.368088] jffs2: notice: (488) jffs2_build_xattr_subsystem: complete building xattr subsystem, 4 of xdatum (3 unchecked, 1 orphan) and 29 of xref (1 dead, 0 orphan) found.
  148. [ 10.386037] mount_root: switching to jffs2 overlay
  149. [ 10.417633] overlayfs: upper fs does not support tmpfile.
  150. [ 10.428331] urandom-seed: Seeding with /etc/urandom.seed
  151. [ 10.532559] eth1: link down
  152. [ 10.551509] procd: - early -
  153. [ 10.555241] procd: - watchdog -
  154. [ 11.220827] procd: - watchdog -
  155. [ 11.224253] procd: - ubus -
  156. [ 11.287376] random: ubusd: uninitialized urandom read (4 bytes read)
  157. [ 11.295669] random: ubusd: uninitialized urandom read (4 bytes read)
  158. [ 11.303256] procd: - init -
  159. [ 12.044723] kmodloader: loading kernel modules from /etc/modules.d/*
  160. [ 12.206934] urngd: v1.0.0 started.
  161. [ 12.289116] ip6_tables: (C) 2000-2006 Netfilter Core Team
  162. [ 12.317065] Loading modules backported from Linux version v4.19.79-0-gdafd634415a7
  163. [ 12.324781] Backport generated by backports.git v4.19.79-1-0-g0c303298
  164. [ 12.356874] ip_tables: (C) 2000-2006 Netfilter Core Team
  165. [ 12.369441] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
  166. [ 12.389425] random: crng init done
  167. [ 12.439222] xt_time: kernel timezone is -0000
  168. [ 12.498751] PPP generic driver version 2.4.2
  169. [ 12.505160] NET: Registered protocol family 24
  170. [ 12.533220] ath10k 4.19 driver, optimized for CT firmware, probing pci device: 0x3c.
  171. [ 12.542404] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
  172. [ 12.548349] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
  173. [ 13.508524] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/fwcfg-pci-0000:00:00.0.txt failed with error -2
  174. [ 13.519241] ath10k_pci 0000:00:00.0: Falling back to user helper
  175. [ 13.729457] firmware ath10k!fwcfg-pci-0000:00:00.0.txt: firmware_loading_store: map pages failed
  176. [ 13.738648] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:00:00.0.bin failed with error -2
  177. [ 13.749532] ath10k_pci 0000:00:00.0: Falling back to user helper
  178. [ 14.123298] firmware ath10k!pre-cal-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed
  179. [ 14.134679] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/ct-firmware-5.bin failed with error -2
  180. [ 14.145825] ath10k_pci 0000:00:00.0: Falling back to user helper
  181. [ 14.326904] firmware ath10k!QCA988X!hw2.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
  182. [ 14.336525] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/ct-firmware-2.bin failed with error -2
  183. [ 14.347668] ath10k_pci 0000:00:00.0: Falling back to user helper
  184. [ 14.529946] firmware ath10k!QCA988X!hw2.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
  185. [ 14.539566] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-6.bin failed with error -2
  186. [ 14.550447] ath10k_pci 0000:00:00.0: Falling back to user helper
  187. [ 14.731278] firmware ath10k!QCA988X!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
  188. [ 14.740639] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-5.bin failed with error -2
  189. [ 14.751518] ath10k_pci 0000:00:00.0: Falling back to user helper
  190. [ 14.935347] firmware ath10k!QCA988X!hw2.0!firmware-5.bin: firmware_loading_store: map pages failed
  191. [ 14.944709] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-4.bin failed with error -2
  192. [ 14.955590] ath10k_pci 0000:00:00.0: Falling back to user helper
  193. [ 15.137328] firmware ath10k!QCA988X!hw2.0!firmware-4.bin: firmware_loading_store: map pages failed
  194. [ 15.146709] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-3.bin failed with error -2
  195. [ 15.157596] ath10k_pci 0000:00:00.0: Falling back to user helper
  196. [ 15.339046] firmware ath10k!QCA988X!hw2.0!firmware-3.bin: firmware_loading_store: map pages failed
  197. [ 15.351624] ath10k_pci 0000:00:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
  198. [ 15.361026] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
  199. [ 15.373428] ath10k_pci 0000:00:00.0: firmware ver 10.1-ct-8x-__fW-022-64cc8007 api 2 features wmi-10.x,has-wmi-mgmt-tx,mfp,txstatus-noack,wmi-10.x-CT,ratemask-CT,txrate-CT,get-temp-CT,tx-rc-CT,cust-stats-CT,retry-gt2-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT crc32 156478f0
  200. [ 15.495321] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
  201. [ 15.505938] ath10k_pci 0000:00:00.0: Falling back to user helper
  202. [ 15.611316] firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed
  203. [ 15.620589] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
  204. [ 16.571060] ath10k_pci 0000:00:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256
  205. [ 16.587826] ath10k_pci 0000:00:00.0: wmi print 'P 128 V 8 T 410'
  206. [ 16.594119] ath10k_pci 0000:00:00.0: wmi print 'msdu-desc: 1424 sw-crypt: 0 ct-sta: 0'
  207. [ 16.602267] ath10k_pci 0000:00:00.0: wmi print 'alloc rem: 20904 iram: 26072'
  208. [ 16.664714] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 2 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
  209. [ 16.677517] ath10k_pci 0000:00:00.0: NOTE: Firmware DBGLOG output disabled in debug_mask: 0x10000000
  210. [ 16.817197] ath: EEPROM regdomain: 0x0
  211. [ 16.817204] ath: EEPROM indicates default country code should be used
  212. [ 16.817207] ath: doing EEPROM country->regdmn map search
  213. [ 16.817219] ath: country maps to regdmn code: 0x3a
  214. [ 16.817224] ath: Country alpha2 being used: US
  215. [ 16.817227] ath: Regpair used: 0x3a
  216. [ 16.878316] ath: EEPROM regdomain: 0x0
  217. [ 16.878323] ath: EEPROM indicates default country code should be used
  218. [ 16.878326] ath: doing EEPROM country->regdmn map search
  219. [ 16.878339] ath: country maps to regdmn code: 0x3a
  220. [ 16.878344] ath: Country alpha2 being used: US
  221. [ 16.878347] ath: Regpair used: 0x3a
  222. [ 16.895891] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
  223. [ 16.897362] ieee80211 phy1: Atheros AR9550 Rev:0 mem=0xb8100000, irq=13
  224. [ 16.994544] kmodloader: done loading kernel modules from /etc/modules.d/*
  225. [ 27.556082] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
  226. [ 27.563150] eth1: link up (1000Mbps/Full duplex)
  227. [ 27.584534] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
  228. [ 27.599433] br-lan: port 1(eth1.1) entered blocking state
  229. [ 27.604956] br-lan: port 1(eth1.1) entered disabled state
  230. [ 27.610682] device eth1.1 entered promiscuous mode
  231. [ 27.615679] device eth1 entered promiscuous mode
  232. [ 27.658202] br-lan: port 1(eth1.1) entered blocking state
  233. [ 27.663691] br-lan: port 1(eth1.1) entered forwarding state
  234. [ 27.669516] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  235. [ 28.594736] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  236. [ 33.520718] ath10k_pci 0000:00:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256
  237. [ 33.537485] ath10k_pci 0000:00:00.0: wmi print 'P 128 V 8 T 410'
  238. [ 33.543794] ath10k_pci 0000:00:00.0: wmi print 'msdu-desc: 1424 sw-crypt: 0 ct-sta: 0'
  239. [ 33.551952] ath10k_pci 0000:00:00.0: wmi print 'alloc rem: 20904 iram: 26072'
  240. [ 33.614690] ath10k_pci 0000:00:00.0: pdev param 0 not supported by firmware
  241. [ 33.629391] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  242. [ 33.662749] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
  243. [ 33.678483] br-lan: port 2(wlan0) entered blocking state
  244. [ 33.683947] br-lan: port 2(wlan0) entered disabled state
  245. [ 33.689687] device wlan0 entered promiscuous mode
  246. [ 33.698260] br-lan: port 3(wlan1) entered blocking state
  247. [ 33.703657] br-lan: port 3(wlan1) entered disabled state
  248. [ 33.709346] device wlan1 entered promiscuous mode
  249. [ 35.265497] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
  250. [ 35.272100] br-lan: port 3(wlan1) entered blocking state
  251. [ 35.277536] br-lan: port 3(wlan1) entered forwarding state
  252. [ 95.305464] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  253. [ 95.312106] br-lan: port 2(wlan0) entered blocking state
  254. [ 95.317553] br-lan: port 2(wlan0) entered forwarding state
  255. [ 105.427104] device wlan0 left promiscuous mode
  256. [ 105.431697] br-lan: port 2(wlan0) entered disabled state
  257. [ 107.145561] ath10k_pci 0000:00:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256
  258. [ 107.162321] ath10k_pci 0000:00:00.0: wmi print 'P 128 V 8 T 410'
  259. [ 107.168902] ath10k_pci 0000:00:00.0: wmi print 'msdu-desc: 1424 sw-crypt: 0 ct-sta: 0'
  260. [ 107.177075] ath10k_pci 0000:00:00.0: wmi print 'alloc rem: 20904 iram: 26072'
  261. [ 107.239806] ath10k_pci 0000:00:00.0: pdev param 0 not supported by firmware
  262. [ 107.254428] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  263. [ 107.265127] br-lan: port 2(wlan0) entered blocking state
  264. [ 107.270574] br-lan: port 2(wlan0) entered disabled state
  265. [ 107.276257] device wlan0 entered promiscuous mode
  266. [ 118.875593] br-lan: port 2(wlan0) entered disabled state
  267. [ 118.922606] device wlan0 left promiscuous mode
  268. [ 118.927125] br-lan: port 2(wlan0) entered disabled state
  269. [ 120.591293] ath10k_pci 0000:00:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256
  270. [ 120.608066] ath10k_pci 0000:00:00.0: wmi print 'P 128 V 8 T 410'
  271. [ 120.614408] ath10k_pci 0000:00:00.0: wmi print 'msdu-desc: 1424 sw-crypt: 0 ct-sta: 0'
  272. [ 120.622585] ath10k_pci 0000:00:00.0: wmi print 'alloc rem: 20904 iram: 26072'
  273. [ 120.685339] ath10k_pci 0000:00:00.0: pdev param 0 not supported by firmware
  274. [ 120.699942] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  275. [ 132.485676] ath10k_pci 0000:00:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256
  276. [ 132.502440] ath10k_pci 0000:00:00.0: wmi print 'P 128 V 8 T 410'
  277. [ 132.508742] ath10k_pci 0000:00:00.0: wmi print 'msdu-desc: 1424 sw-crypt: 0 ct-sta: 0'
  278. [ 132.516911] ath10k_pci 0000:00:00.0: wmi print 'alloc rem: 20904 iram: 26072'
  279. [ 132.579663] ath10k_pci 0000:00:00.0: pdev param 0 not supported by firmware
  280. [ 132.594261] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  281. [ 218.287495] ath10k_pci 0000:00:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256
  282. [ 218.304261] ath10k_pci 0000:00:00.0: wmi print 'P 128 V 8 T 410'
  283. [ 218.310576] ath10k_pci 0000:00:00.0: wmi print 'msdu-desc: 1424 sw-crypt: 0 ct-sta: 0'
  284. [ 218.318735] ath10k_pci 0000:00:00.0: wmi print 'alloc rem: 20904 iram: 26072'
  285. [ 218.381471] ath10k_pci 0000:00:00.0: pdev param 0 not supported by firmware
  286. [ 218.396089] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  287. [ 507.834743] ath10k_pci 0000:00:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256
  288. [ 507.851518] ath10k_pci 0000:00:00.0: wmi print 'P 128 V 8 T 410'
  289. [ 507.857826] ath10k_pci 0000:00:00.0: wmi print 'msdu-desc: 1424 sw-crypt: 0 ct-sta: 0'
  290. [ 507.865999] ath10k_pci 0000:00:00.0: wmi print 'alloc rem: 20904 iram: 26072'
  291. [ 507.928780] ath10k_pci 0000:00:00.0: pdev param 0 not supported by firmware
  292. [ 507.943516] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  293. [ 519.736875] ath10k_pci 0000:00:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256
  294. [ 519.753668] ath10k_pci 0000:00:00.0: wmi print 'P 128 V 8 T 410'
  295. [ 519.760015] ath10k_pci 0000:00:00.0: wmi print 'msdu-desc: 1424 sw-crypt: 0 ct-sta: 0'
  296. [ 519.768187] ath10k_pci 0000:00:00.0: wmi print 'alloc rem: 20904 iram: 26072'
  297. [ 519.830970] ath10k_pci 0000:00:00.0: pdev param 0 not supported by firmware
  298. [ 519.845578] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Advertisement
RAW Paste Data Copied
Advertisement