Public Pastes
daily pastebin goal
10%
SHARE
TWEET

Untitled

a guest Nov 12th, 2012 34 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. martctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-23-generic] (local build)
  2. Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family:     SAMSUNG SpinPoint T166
  6. Device Model:     SAMSUNG HD501LJ
  7. Serial Number:    S0MUJQSSB01139
  8. LU WWN Device Id: 5 0000f0 0bbb01139
  9. Firmware Version: CR100-13
  10. User Capacity:    500,107,862,016 bytes [500 GB]
  11. Sector Size:      512 bytes logical/physical
  12. Device is:        In smartctl database [for details use: -P show]
  13. ATA Version is:   8
  14. ATA Standard is:  ATA-8-ACS revision 3b
  15. Local Time is:    Mon Nov 12 17:55:21 2012 UTC
  16. SMART support is: Available - device has SMART capability.
  17. SMART support is: Enabled
  18.  
  19. === START OF READ SMART DATA SECTION ===
  20. SMART overall-health self-assessment test result: FAILED!
  21. Drive failure expected in less than 24 hours. SAVE ALL DATA.
  22. See vendor-specific Attribute list for failed Attributes.
  23.  
  24. General SMART Values:
  25. Offline data collection status:  (0x00) Offline data collection activity
  26.                                         was never started.
  27.                                         Auto Offline Data Collection: Disabled.
  28. Self-test execution status:      (   0) The previous self-test routine completed
  29.                                         without error or no self-test has ever
  30.                                         been run.
  31. Total time to complete Offline
  32. data collection:                ( 8887) seconds.
  33. Offline data collection
  34. capabilities:                    (0x5b) SMART execute Offline immediate.
  35.                                         Auto Offline data collection on/off support.
  36.                                         Suspend Offline collection upon new
  37.                                         command.
  38.                                         Offline surface scan supported.
  39.                                         Self-test supported.
  40.                                         No Conveyance Self-test supported.
  41.                                         Selective Self-test supported.
  42. SMART capabilities:            (0x0003) Saves SMART data before entering
  43.                                         power-saving mode.
  44.                                         Supports SMART auto save timer.
  45. Error logging capability:        (0x01) Error logging supported.
  46.                                         General Purpose Logging supported.
  47. Short self-test routine
  48. recommended polling time:        (   2) minutes.
  49. Extended self-test routine
  50. recommended polling time:        ( 152) minutes.
  51. SCT capabilities:              (0x003f) SCT Status supported.
  52.                                         SCT Error Recovery Control supported.
  53.                                         SCT Feature Control supported.
  54.                                         SCT Data Table supported.
  55.  
  56. SMART Attributes Data Structure revision number: 16
  57. Vendor Specific SMART Attributes with Thresholds:
  58. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  59.   1 Raw_Read_Error_Rate     0x000f   253   045   051    Pre-fail  Always   In_the_past 260
  60.   3 Spin_Up_Time            0x0007   100   100   015    Pre-fail  Always       -       2752
  61.   4 Start_Stop_Count        0x0032   098   098   000    Old_age   Always       -       2918
  62.   5 Reallocated_Sector_Ct   0x0033   001   001   010    Pre-fail  Always   FAILING_NOW 1231
  63.   7 Seek_Error_Rate         0x000f   253   253   051    Pre-fail  Always       -       0
  64.   8 Seek_Time_Performance   0x0025   253   253   015    Pre-fail  Offline      -       0
  65.   9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       10924
  66.  10 Spin_Retry_Count        0x0033   253   253   051    Pre-fail  Always       -       0
  67.  11 Calibration_Retry_Count 0x0012   253   100   000    Old_age   Always       -       0
  68.  12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1793
  69.  13 Read_Soft_Error_Rate    0x000e   100   100   000    Old_age   Always       -       104693
  70. 187 Reported_Uncorrect      0x0032   001   001   000    Old_age   Always       -       10093207
  71. 188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       31
  72. 190 Airflow_Temperature_Cel 0x0022   065   058   000    Old_age   Always       -       35
  73. 194 Temperature_Celsius     0x0022   133   112   000    Old_age   Always       -       35
  74. 195 Hardware_ECC_Recovered  0x001a   100   100   000    Old_age   Always       -       104693
  75. 196 Reallocated_Event_Count 0x0032   001   001   000    Old_age   Always       -       1231
  76. 197 Total_Pending_Sectors   0x0012   089   089   000    Old_age   Always       -       103
  77. 198 Offline_Uncorrectable   0x0030   253   253   000    Old_age   Offline      -       0
  78. 199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
  79. 200 Multi_Zone_Error_Rate   0x000a   253   100   000    Old_age   Always       -       0
  80. 201 Soft_Read_Error_Rate    0x000a   253   088   000    Old_age   Always       -       129
  81. 202 Data_Address_Mark_Errs  0x0032   253   253   000    Old_age   Always       -       0
  82.  
  83. SMART Error Log Version: 1
  84. ATA Error Count: 1985 (device log contains only the most recent five errors)
  85.         CR = Command Register [HEX]
  86.         FR = Features Register [HEX]
  87.         SC = Sector Count Register [HEX]
  88.         SN = Sector Number Register [HEX]
  89.         CL = Cylinder Low Register [HEX]
  90.         CH = Cylinder High Register [HEX]
  91.         DH = Device/Head Register [HEX]
  92.         DC = Device Command Register [HEX]
  93.         ER = Error register [HEX]
  94.         ST = Status register [HEX]
  95. Powered_Up_Time is measured from power on, and printed as
  96. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  97. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  98.  
  99. Error 1985 occurred at disk power-on lifetime: 10924 hours (455 days + 4 hours)
  100.   When the command that caused the error occurred, the device was active or idle.
  101.  
  102.   After command completion occurred, registers were:
  103.   ER ST SC SN CL CH DH
  104.   -- -- -- -- -- -- --
  105.   40 51 08 e8 47 51 e3  Error: UNC 8 sectors at LBA = 0x035147e8 = 55658472
  106.  
  107.   Commands leading to the command that caused the error were:
  108.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  109.   -- -- -- -- -- -- -- --  ----------------  --------------------
  110.   c8 00 08 e8 47 51 e3 00      00:34:32.688  READ DMA
  111.   ec 00 00 00 00 00 a0 00      00:34:27.250  IDENTIFY DEVICE
  112.   ef 03 45 00 00 00 a0 00      00:34:27.250  SET FEATURES [Set transfer mode]
  113.   ec 00 00 00 00 00 a0 00      00:34:27.250  IDENTIFY DEVICE
  114.  
  115. Error 1984 occurred at disk power-on lifetime: 10924 hours (455 days + 4 hours)
  116.   When the command that caused the error occurred, the device was active or idle.
  117.  
  118.   After command completion occurred, registers were:
  119.   ER ST SC SN CL CH DH
  120.   -- -- -- -- -- -- --
  121.   40 51 08 e8 47 51 e3  Error: UNC 8 sectors at LBA = 0x035147e8 = 55658472
  122.  
  123.   Commands leading to the command that caused the error were:
  124.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  125.   -- -- -- -- -- -- -- --  ----------------  --------------------
  126.   c8 00 08 e8 47 51 e3 00      00:34:27.125  READ DMA
  127.   ec 00 00 00 00 00 a0 00      00:34:21.438  IDENTIFY DEVICE
  128.   ef 03 45 00 00 00 a0 00      00:34:21.438  SET FEATURES [Set transfer mode]
  129.   ec 00 00 00 00 00 a0 00      00:34:21.438  IDENTIFY DEVICE
  130.  
  131. Error 1983 occurred at disk power-on lifetime: 10924 hours (455 days + 4 hours)
  132.   When the command that caused the error occurred, the device was active or idle.
  133.  
  134.   After command completion occurred, registers were:
  135.   ER ST SC SN CL CH DH
  136.   -- -- -- -- -- -- --
  137.   40 51 08 e8 47 51 e3  Error: UNC 8 sectors at LBA = 0x035147e8 = 55658472
  138.  
  139.   Commands leading to the command that caused the error were:
  140.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  141.   -- -- -- -- -- -- -- --  ----------------  --------------------
  142.   c8 00 08 e8 47 51 e3 00      00:34:21.313  READ DMA
  143.   ec 00 00 00 00 00 a0 00      00:34:15.375  IDENTIFY DEVICE
  144.   ef 03 45 00 00 00 a0 00      00:34:15.375  SET FEATURES [Set transfer mode]
  145.   ec 00 00 00 00 00 a0 00      00:34:15.375  IDENTIFY DEVICE
  146.  
  147. Error 1982 occurred at disk power-on lifetime: 10924 hours (455 days + 4 hours)
  148.   When the command that caused the error occurred, the device was active or idle.
  149.  
  150.   After command completion occurred, registers were:
  151.   ER ST SC SN CL CH DH
  152.   -- -- -- -- -- -- --
  153.   40 51 08 e8 47 51 e3  Error: UNC 8 sectors at LBA = 0x035147e8 = 55658472
  154.  
  155.   Commands leading to the command that caused the error were:
  156.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  157.   -- -- -- -- -- -- -- --  ----------------  --------------------
  158.   c8 00 08 e8 47 51 e3 00      00:34:15.250  READ DMA
  159.   ec 00 00 00 00 00 a0 00      00:34:09.875  IDENTIFY DEVICE
  160.   ef 03 45 00 00 00 a0 00      00:34:09.875  SET FEATURES [Set transfer mode]
  161.   ec 00 00 00 00 00 a0 00      00:34:09.875  IDENTIFY DEVICE
  162.  
  163. Error 1981 occurred at disk power-on lifetime: 10924 hours (455 days + 4 hours)
  164.   When the command that caused the error occurred, the device was active or idle.
  165.  
  166.   After command completion occurred, registers were:
  167.   ER ST SC SN CL CH DH
  168.   -- -- -- -- -- -- --
  169.   40 51 08 e8 47 51 e3  Error: UNC 8 sectors at LBA = 0x035147e8 = 55658472
  170.  
  171.   Commands leading to the command that caused the error were:
  172.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  173.   -- -- -- -- -- -- -- --  ----------------  --------------------
  174.   c8 00 08 e8 47 51 e3 00      00:34:09.750  READ DMA
  175.   ec 00 00 00 00 00 a0 00      00:34:03.000  IDENTIFY DEVICE
  176.   ef 03 45 00 00 00 a0 00      00:34:03.000  SET FEATURES [Set transfer mode]
  177.   ec 00 00 00 00 00 a0 00      00:34:03.000  IDENTIFY DEVICE
  178.  
  179. SMART Self-test log structure revision number 1
  180. Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
  181. # 1  Short offline       Completed without error       00%      8912         -
  182. # 2  Short offline       Completed without error       00%      7123         -
  183.  
  184. Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
  185. SMART Selective self-test log data structure revision number 0
  186. Note: revision number not 1 implies that no selective self-test has ever been run
  187.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  188.     1        0        0  Not_testing
  189.     2        0        0  Not_testing
  190.     3        0        0  Not_testing
  191.     4        0        0  Not_testing
  192.     5        0        0  Not_testing
  193. Selective self-test flags (0x0):
  194.   After scanning selected spans, do NOT read-scan remainder of disk.
  195. If Selective self-test is pending on power-up, resume after 0 minute delay.
RAW Paste Data
Top