SHARE
TWEET

vsftpd.conf

Mohammed_AhmedAF Jul 4th, 2014 214 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. # Example config file /etc/vsftpd.conf
  2. #
  3. # The default compiled in settings are fairly paranoid. This sample file
  4. # loosens things up a bit, to make the ftp daemon more usable.
  5. # Please see vsftpd.conf.5 for all compiled in defaults.
  6. #
  7. # READ THIS: This example file is NOT an exhaustive list of vsftpd options.
  8. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
  9. # capabilities.
  10. #
  11. #
  12. # Run standalone?  vsftpd can run either from an inetd or as a standalone
  13. # daemon started from an initscript.
  14. listen=YES
  15. #
  16. # Run standalone with IPv6?
  17. # Like the listen parameter, except vsftpd will listen on an IPv6 socket
  18. # instead of an IPv4 one. This parameter and the listen parameter are mutually
  19. # exclusive.
  20. #listen_ipv6=YES
  21. #
  22. # Allow anonymous FTP? (Disabled by default)
  23. anonymous_enable=NO
  24. #
  25. # Uncomment this to allow local users to log in.
  26. local_enable=YES
  27. #
  28. # Uncomment this to enable any form of FTP write command.
  29. write_enable=YES
  30. #
  31. # Default umask for local users is 077. You may wish to change this to 022,
  32. # if your users expect that (022 is used by most other ftpd's)
  33. #local_umask=022
  34. #
  35. # Uncomment this to allow the anonymous FTP user to upload files. This only
  36. # has an effect if the above global write enable is activated. Also, you will
  37. # obviously need to create a directory writable by the FTP user.
  38. #anon_upload_enable=YES
  39. #
  40. # Uncomment this if you want the anonymous FTP user to be able to create
  41. # new directories.
  42. #anon_mkdir_write_enable=YES
  43. #
  44. # Activate directory messages - messages given to remote users when they
  45. # go into a certain directory.
  46. dirmessage_enable=YES
  47. #
  48. # If enabled, vsftpd will display directory listings with the time
  49. # in  your  local  time  zone.  The default is to display GMT. The
  50. # times returned by the MDTM FTP command are also affected by this
  51. # option.
  52. use_localtime=YES
  53. #
  54. # Activate logging of uploads/downloads.
  55. xferlog_enable=YES
  56. #
  57. # Make sure PORT transfer connections originate from port 20 (ftp-data).
  58. connect_from_port_20=YES
  59. #
  60. # If you want, you can arrange for uploaded anonymous files to be owned by
  61. # a different user. Note! Using "root" for uploaded files is not
  62. # recommended!
  63. #chown_uploads=YES
  64. #chown_username=whoever
  65. #
  66. # You may override where the log file goes if you like. The default is shown
  67. # below.
  68. #xferlog_file=/var/log/vsftpd.log
  69. #
  70. # If you want, you can have your log file in standard ftpd xferlog format.
  71. # Note that the default log file location is /var/log/xferlog in this case.
  72. #xferlog_std_format=YES
  73. #
  74. # You may change the default value for timing out an idle session.
  75. #idle_session_timeout=600
  76. #
  77. # You may change the default value for timing out a data connection.
  78. #data_connection_timeout=120
  79. #
  80. # It is recommended that you define on your system a unique user which the
  81. # ftp server can use as a totally isolated and unprivileged user.
  82. #nopriv_user=ftpsecure
  83. #
  84. # Enable this and the server will recognise asynchronous ABOR requests. Not
  85. # recommended for security (the code is non-trivial). Not enabling it,
  86. # however, may confuse older FTP clients.
  87. #async_abor_enable=YES
  88. #
  89. # By default the server will pretend to allow ASCII mode but in fact ignore
  90. # the request. Turn on the below options to have the server actually do ASCII
  91. # mangling on files when in ASCII mode.
  92. # Beware that on some FTP servers, ASCII support allows a denial of service
  93. # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
  94. # predicted this attack and has always been safe, reporting the size of the
  95. # raw file.
  96. # ASCII mangling is a horrible feature of the protocol.
  97. #ascii_upload_enable=YES
  98. #ascii_download_enable=YES
  99. #
  100. # You may fully customise the login banner string:
  101. #ftpd_banner=Welcome to blah FTP service.
  102. #
  103. # You may specify a file of disallowed anonymous e-mail addresses. Apparently
  104. # useful for combatting certain DoS attacks.
  105. #deny_email_enable=YES
  106. # (default follows)
  107. #banned_email_file=/etc/vsftpd.banned_emails
  108. #
  109. # You may restrict local users to their home directories.  See the FAQ for
  110. # the possible risks in this before using chroot_local_user or
  111. # chroot_list_enable below.
  112. chroot_local_user=YES
  113. #
  114. # You may specify an explicit list of local users to chroot() to their home
  115. # directory. If chroot_local_user is YES, then this list becomes a list of
  116. # users to NOT chroot().
  117. # (Warning! chroot'ing can be very dangerous. If using chroot, make sure that
  118. # the user does not have write access to the top level directory within the
  119. # chroot)
  120. #chroot_local_user=YES
  121. #chroot_list_enable=YES
  122. # (default follows)
  123. #chroot_list_file=/etc/vsftpd.chroot_list
  124. #
  125. # You may activate the "-R" option to the builtin ls. This is disabled by
  126. # default to avoid remote users being able to cause excessive I/O on large
  127. # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
  128. # the presence of the "-R" option, so there is a strong case for enabling it.
  129. #ls_recurse_enable=YES
  130. #
  131. # Customization
  132. #
  133. # Some of vsftpd's settings don't fit the filesystem layout by
  134. # default.
  135. #
  136. # This option should be the name of a directory which is empty.  Also, the
  137. # directory should not be writable by the ftp user. This directory is used
  138. # as a secure chroot() jail at times vsftpd does not require filesystem
  139. # access.
  140. secure_chroot_dir=/var/run/vsftpd/empty
  141. #
  142. # This string is the name of the PAM service vsftpd will use.
  143. pam_service_name=vsftpd
  144. #
  145. # This option specifies the location of the RSA certificate to use for SSL
  146. # encrypted connections.
  147. rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
  148. # This option specifies the location of the RSA key to use for SSL
  149. # encrypted connections.
  150. rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!
 
Top