Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- log.smart 100% 9858 26.1KB/s 00:00
- abdallah@poupon-la-peste:~/conneries$ cat log.smart
- smartctl 6.6 2016-05-31 r4324 [i686-linux-4.15.0-54-generic] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Toshiba 2.5" HDD MK..65GSX
- Device Model: TOSHIBA MK3265GSX
- Serial Number: 90BIP4CNT
- LU WWN Device Id: 5 000039 2c2a02756
- Firmware Version: GJ002F
- User Capacity: 320 072 933 376 bytes [320 GB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: 5400 rpm
- Form Factor: 2.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS (minor revision not indicated)
- SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
- Local Time is: Fri Jul 12 17:25:26 2019 CEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 120) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 99) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000b 100 099 050 Pre-fail Always - 0
- 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
- 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1146
- 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 1415
- 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 155
- 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
- 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
- 9 Power_On_Hours 0x0032 028 028 000 Old_age Always - 28878
- 10 Spin_Retry_Count 0x0033 127 100 030 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1413
- 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 937
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 235
- 193 Load_Cycle_Count 0x0032 081 081 000 Old_age Always - 196430
- 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 46 (Min/Max 14/53)
- 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 122
- 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 48
- 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 3
- 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 60
- 222 Loaded_Hours 0x0032 038 038 000 Old_age Always - 24889
- 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
- 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
- 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 309
- 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
- SMART Error Log Version: 1
- ATA Error Count: 1890 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 1890 occurred at disk power-on lifetime: 28807 hours (1200 days + 7 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 12 c6 0a a4 e4 Error: UNC 18 sectors at LBA = 0x04a40ac6 = 77859526
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 20 b8 0a a4 e0 00 27d+22:22:50.276 READ DMA EXT
- 25 00 20 40 80 75 e0 00 27d+22:22:50.271 READ DMA EXT
- 25 00 20 08 3d 7b e0 00 27d+22:22:50.256 READ DMA EXT
- 25 00 20 a0 12 76 e0 00 27d+22:22:50.241 READ DMA EXT
- 25 00 20 f0 df c3 e0 00 27d+22:22:50.230 READ DMA EXT
- Error 1889 occurred at disk power-on lifetime: 28772 hours (1198 days + 20 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 34 ac 9e bb e7 Error: UNC 52 sectors at LBA = 0x07bb9eac = 129736364
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 40 a0 9e bb e7 00 26d+10:42:43.435 READ DMA
- c8 00 30 00 12 54 e8 00 26d+10:42:43.435 READ DMA
- c8 00 00 28 49 ba e9 00 26d+10:42:43.301 READ DMA
- c8 00 00 30 12 54 e8 00 26d+10:42:43.290 READ DMA
- c8 00 d8 58 26 d6 ea 00 26d+10:42:42.625 READ DMA
- Error 1888 occurred at disk power-on lifetime: 28732 hours (1197 days + 4 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 12 c6 0a a4 e4 Error: UNC 18 sectors at LBA = 0x04a40ac6 = 77859526
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 20 b8 0a a4 e0 00 24d+18:46:18.421 READ DMA EXT
- 25 00 20 40 80 75 e0 00 24d+18:46:18.416 READ DMA EXT
- 25 00 20 08 3d 7b e0 00 24d+18:46:18.402 READ DMA EXT
- 25 00 20 a0 12 76 e0 00 24d+18:46:18.386 READ DMA EXT
- 25 00 20 f0 df c3 e0 00 24d+18:46:18.374 READ DMA EXT
- Error 1887 occurred at disk power-on lifetime: 28730 hours (1197 days + 2 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 3d 03 e3 8e e0 Error: UNC 61 sectors at LBA = 0x008ee303 = 9364227
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 40 00 e3 8e e0 00 24d+17:01:54.072 READ DMA EXT
- 25 00 40 c0 e2 8e e0 00 24d+17:01:54.071 READ DMA EXT
- 25 00 40 80 e2 8e e0 00 24d+17:01:54.071 READ DMA EXT
- 25 00 40 40 e2 8e e0 00 24d+17:01:54.070 READ DMA EXT
- 25 00 40 00 e2 8e e0 00 24d+17:01:54.070 READ DMA EXT
- Error 1886 occurred at disk power-on lifetime: 28711 hours (1196 days + 7 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 e4 1c c9 32 e8 Error: UNC 228 sectors at LBA = 0x0832c91c = 137546012
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 00 00 c9 32 e8 00 23d+21:40:48.375 READ DMA
- 25 00 00 00 0c ba e0 00 23d+21:40:46.485 READ DMA EXT
- 25 00 00 00 0b ba e0 00 23d+21:40:44.472 READ DMA EXT
- 25 00 00 00 0a ba e0 00 23d+21:40:43.948 READ DMA EXT
- 25 00 00 00 09 ba e0 00 23d+21:40:43.880 READ DMA EXT
- SMART Self-test log structure revision number 1
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement