Guest User

Untitled

a guest
Jun 5th, 2018
218
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. hikey960 boarid:5301 xloader use UART6
  2. scsysstat_value[0].
  3. clear reset source
  4. last_keypoint0,reboot_type0
  5. secdbg not DCU.
  6. SecDbgVer exit
  7.  
  8. xloader chipid is: 0x36600110, start at 3400ms.
  9. Build Date: Dec 6 2017, 15:31:59
  10. [clock_init] ++
  11. hikey960 [hikey960_clk_init]
  12. hi3660 [clk_setup]
  13. [clock_init] --
  14. storage type is UFS
  15. ufs retry: 6 count v_tx:0 v_rx:0
  16. ufs set v_tx:0 v_rx:0
  17. UfsLuInit ret:0
  18. UsbMode, nvData invalid
  19. rtc_nve_read failed !
  20. Hikey960[5301] no need avs_init.
  21. ddr ft:0xf20332a3,mode:1 target:4
  22. [USBI]driver init:0003e800 0003f840 00000000
  23. [USBI]download start! total_frame:24
  24. +1 0|+2 0|+3 0|+4 0|+5 0|+6 0|+7 0|+8 0|+9 0|+10 0|+11 0|+12 0|+1|
  25. [USBI]expected:23680, received:23680 (bytes)
  26. [USBI]download suc
  27. UceLdOk
  28. ch 0 gt_errfail, STATUS:0x00000060
  29. ch 0 gdst_errfail, STATUS:0x00000040
  30. ch 1 gt_errfail, STATUS:0x00000060
  31. ch 1 gdst_errfail, STATUS:0x00000040
  32. ch 2 gt_errfail, STATUS:0x00000060
  33. ch 2 gdst_errfail, STATUS:0x00000040
  34. ch 3 gt_errfail, STATUS:0x00000060
  35. ch 3 gdst_errfail, STATUS:0x00000040
  36. timeout
  37. timeout
  38. timeout
  39. timeout
  40. density: 0x0c0c0c0c,0x00000000,0x0c0c0c0c,0x00000000,0x0c0c0c0c,0x00000000,0x0c0c0c0c,0x00000000
  41. ddr info 0x00000306
  42. 400M
  43. 685M
  44. 1067M
  45. C3R,V0x0000002c e:66
  46. C3R,V0x0000002d e:66
  47. C0R,V0x0000002d e:66
  48. C3R,V0x0000002e e:66
  49. C0R,V0x0000002e e:66
  50. C1R,V0x0000002e e:66
  51. C2R,V0x0000002d e:66
  52. C3R,V0x0000002f e:66
  53. C0R,V0x0000002f e:65
  54. C1R,V0x0000002f e:66
  55. C2R,V0x0000002e e:66
  56. C3R,V0x00000030 e:66
  57. C0R,V0x00000030 e:65
  58. C1R,V0x00000030 e:66
  59. C2R,V0x0000002f e:66
  60. C3R,V0x00000031 e:65
  61. 1244M
  62. 1866M
  63. C0R,V0x00000017 e:66
  64. C2R,V0x00000017 e:113
  65. C3R,V0x00000017 e:66
  66. UsbMode, nvData invalid
  67. UsbMode, nvData invalid
  68. UsbMode, nvData invalid
  69. [USBI]driver init:0003e800 0003f840 00000000
  70. [USBI]download start! total_frame:3350
  71. +1 0|+2 0|+3 0|+4 0|+5 0|+6 0|+7 0|+8 0|+9 0|+10 0|+11 0|+12 0|+1|
  72. [USBI]expected:3430400, received:3430400 (bytes)
  73. [USBI]download suc
  74. iomcu_subsys_init
  75. boot_c0 PROFILE 4
  76. slave0 irq0:0x00000004
  77. slave1 irq0:0x00000004
  78. main: ******** Fastboot for Kirin *****************
  79. main: ******** Build Date: Apr 8 2017, 15:34:11 **
  80. main: ******** Fastboot start at 18111 ms **********
  81.  
  82. main: print soc_id computed in xloader phase, is below:
  83. main: 00000000 main: 00000000 main: 00000000 main: 00000000 main:
  84. main: 00000000 main: 00000000 main: 00000000 main: 00000000 main:
  85. led_alwayson: can't get dtb operators
  86. bbox: bbox_register_module_ops success.
  87. bfm: : >>>>>enter bfm_init
  88. bfm: : [disable_boot_fail_system] boot_fail_system state is 0
  89. clock: PLL Stat
  90. clock: PLL2 ctrl0=0x04909604,ctrl1=0x02000000
  91. clock: PLL2 acpu en_stat:0x00000008, acpu gt_stat:0x00040000
  92. clock: PLL2 final en_stat:0x00100000, final gt_stat:0x00020000
  93. clock: PLL3 ctrl0=0x04904005,ctrl1=0x07555555
  94. clock: PLL3 acpu en_stat:0x00000000, acpu gt_stat:0x00000000
  95. clock: PLL3 final en_stat:0x00200000, final gt_stat:0x00040000
  96. clock: clock init OK
  97. ufs: ufs start on platform[36600110]ufs: ufs current mode: 0x00000011
  98. ufs: ufs current gear: 0x00000003
  99. ufs: ufs mphy reg 0x4A = 0x00000000
  100. ufs: bUD0BaseOffset: 0x00000010, bUDConfigPLength: 0x00000010
  101. ufs: UFS device manufacturerid = 0x000001ce
  102. ufs: UFS device: S******
  103. bfm: : >>>>>enter set_boot_stage
  104. bfm: : bootStageCode is 0x02000001, mntnStageCode is 27
  105. bfm: : <<<<<exit set_boot_stage.
  106. storage: emmc_ops invalid
  107. storage: storage type is UFS
  108. bfm: : bfm system is disabled!
  109. storage: emmc_init: BL2_STAGE_EMMC_OK is 33554435!
  110. bfm: : >>>>>enter set_boot_stage
  111. bfm: : bootStageCode is 0x02000003, mntnStageCode is 29
  112. bfm: : <<<<<exit set_boot_stage.
  113. bfm: : >>>>>enter set_boot_stage
  114. bfm: : bootStageCode is 0x02010001, mntnStageCode is 30
  115. bfm: : <<<<<exit set_boot_stage.
  116. ddr: current logic version is lpddr4 verison !!!
  117. ddr: ddr size is 3072MB
  118. bbox: register modid [0x81fff200]
  119. bbox: register exception succeed.
  120. bbox: register modid [0x81fff202]
  121. bbox: register exception succeed.
  122. bbox: register modid [0x81fff20b]
  123. bbox: register exception succeed.
  124. watchdog: Enable watchdog start
  125. boardid: [BDID]boardid: 5301
  126. gpio: hikey960_gpio_init: GPIO 46 202 206 ouput low, GPIO 219 pullup.
  127. load_kernel: register_update_dt_ops for usb!
  128. usb: [USBERR]random_serial: fastboot serial: 8670462972000000
  129. secureboot: Enter secboot_init: set pll efuse flag!
  130. secureboot: pll efuse flag has been succ set!bbox: register modid [0x81fff20a]
  131. bbox: register exception succeed.
  132. secureboot: SECBOOT_DEV_INFO_DADDR = 0x1d7fff00, SECBOOT_DEV_INFO_SIZE = 0x00000040!
  133. dtimage: Invalid dtb image header
  134. dtimage: dtb_init init fail
  135. load_kernel: register_update_dt_ops for led!
  136. reboot_reason: scsysstat_value is 0x00000000
  137. pmu: get_fdt_addr: can't get fdt operators
  138. pmu: pmu_get_fdt_addr failed
  139. pmu: pmu_mntn_record_dts_parse failed!
  140. bbox: save_tempbuffer_to_loop_area():727:storage_read fail[-1]
  141. reboot_reason: reboot_reason is AP_S_COLDBOOT
  142. reboot_reason: clear_reset_source in!
  143. reboot_reason: tmp =0x0effcc70
  144. power: get_chargerIC_type: can't get dtb operators
  145. power: get_coul_type: can't get dtb operators
  146. power: get coul_type failed!
  147. power: hi6421v500 register coulometer ops fail!
  148. no_module: [hi6523_get_config_info]: can't get dtb operators
  149. no_module: [hi6523_start_charging_by_init_params]: can't get dtb operators
  150. max77813: get_buckboost_type: can't get dtb operators
  151. max77813: get dts buckboost type fail!
  152. cpu_buck: pmu type3 not registered
  153. cpu_buck: Bad cpu buck info:1
  154. bbox: failed to get dtimage operators
  155. mntn: tele_mntn_stat_point_init: can not bbox_ops !
  156. mntn: tele_mntn_m3_wdt_config: get dtb_ops failed!
  157. mntn: mntn init
  158. mntndump: [MNTN]:failed to get dtimage operators
  159. mntndump: mntn_dump_init failed
  160. mntndump: get_mntn_dump_addr:mid[2] is not init
  161. mntn: kernel dump is not available
  162. mntn: reboot_type is 0
  163. mntn:
  164. no need to dump_mem...
  165. mntn: enter [registe_pstore_ramoops_dump]
  166. mntndump: get_mntn_dump_addr:mid[5] is not init
  167. mntn: no mdump_pstore info
  168. mntn: M3_RDR_SYS_CONTEXT_BASE_ADDR is null
  169. uart_cfg: [MNTN]:failed to get dtimage operators
  170. uart_cfg: set_default_uart_cfg: uart_from_dts_read failed!
  171. uart_cfg: module_idx 2, uart_no 6
  172. uart_cfg: odule_idx 11, uart_no 15
  173. uart_cfg: module_idx 2, uart_no 6
  174. uart_cfg: 15
  175. uart_cfg: [get_uart_board_type]: can't get dtb operators
  176. uart_cfg: boardid: 5301 use uart port: 6
  177. pasr: in pasr_init-43 ...ddr: current logic version is lpddr4 verison !!!
  178. ddr: current logic version is lpddr4 verison !!!
  179. display: [display]get_detect_type: failed to get dtimage operators!
  180. display: lcd:no lcd detect_type
  181. no_module: [LOGO] get_logo_buffer_from_dtsi: failed to get dtimage operators
  182. no_module: [LOGO] logo_init: logo init failed!!! used the default fb addr.
  183. display: [display]jdi_otm2503b_panel_init: lcd type is not JDI_OTM2503B_5P5_LCD.
  184. display: [display]jdi_nt35696_panel_init: lcd type is not JDI_NT35696_5P5_LCD.
  185. display: [display]get_dts_value: failed to get dtimage operators!
  186. display: [display]get_dts_value: failed to get dtimage operators!
  187. display: get lm36923_support failed!
  188. bfm: : >>>>>enter set_boot_stage
  189. bfm: : bootStageCode is 0x02010002, mntnStageCode is 31
  190. bfm: : <<<<<exit set_boot_stage.
  191. Audio_codec: [audio]:failed to get dtimage operators
  192. load_teeos: failed to get dtimage operators, change fb dts failed
  193. load_teeos: failed to get dtimage operators, change fb dts failed
  194. display: [display]hisi_get_disp_info: hisifb_data is NULL pointer, return!
  195. mem_cfg: load_nomap_mem_config: get_operators fail, 00000000 1ae98040 1ae6f390
  196. bfm: : >>>>>enter set_boot_stage
  197. bfm: : bootStageCode is 0x02010003, mntnStageCode is 32
  198. bfm: : <<<<<exit set_boot_stage.
  199. watchdog: Disable watchdog start
  200. bfm: : [disable_boot_fail_system] boot_fail_system state is 0
  201. rescue: ^^^^^^^^^[rescue_init] ok !
  202. usbloader: bootmode is 4
  203. usb: [USBFINFO]USB RESET
  204. usb: [USBFINFO]USB CONNDONE, highspeed
  205. usb: [USBFINFO]USB RESET
  206. usb: [USBFINFO]USB CONNDONE, highspeed
  207. usb: [USBFINFO]USB RESET
  208. usb: [USBFINFO]USB CONNDONE, highspeed
  209. usbloader: usb: online (highspeed)
  210. usb: [USBFINFO]usb enum done
  211. usbloader: usb_rx_cmd_complete() 'getvar:slot-count', size is 0x00000011
  212. usbloader: usb_rx_cmd_complete() 'getvar:slot-suffixes', size is 0x00000014
  213. usbloader: usb_rx_cmd_complete() 'getvar:has-slot:ptable', size is 0x00000016
  214. usbloader: usb_rx_cmd_complete() 'getvar:partition-type:ptable', size is 0x0000001c
  215. usbloader: usb_rx_cmd_complete() 'getvar:max-download-size', size is 0x00000018
  216. usbloader: usb_rx_cmd_complete() 'download:00031000', size is 0x00000011
  217. usbloader: usb_rx_cmd_complete() 'flash:ptable', size is 0x0000000c
  218. secureboot: SecBoot_GetVrlOffset: get ptn offset error!
  219. secureboot: SecBoot_GetVrlOffset: get ptn offset error!
  220. usbloader: [auto_resize]:start amend ptable
  221. usbloader: [auto_resize]:Success to resize ptable image
  222. usbloader: usb_rx_cmd_complete() 'getvar:slot-count', size is 0x00000011
  223. usbloader: usb_rx_cmd_complete() 'getvar:slot-suffixes', size is 0x00000014
  224. usbloader: usb_rx_cmd_complete() 'getvar:has-slot:xloader', size is 0x00000017
  225. usbloader: usb_rx_cmd_complete() 'getvar:partition-type:xloader', size is 0x0000001d
  226. usbloader: usb_rx_cmd_complete() 'getvar:max-download-size', size is 0x00000018
  227. usbloader: usb_rx_cmd_complete() 'download:00025c80', size is 0x00000011
  228. usbloader: usb_rx_cmd_complete() 'flash:xloader', size is 0x0000000d
  229. usbloader: writing 154752 bytes to 'xloader'...
  230. secureboot: SecBoot_WriteVRL: imageNamePtr:xloader, vrl_offset:0x00000000
  231. usbloader: can get secdbg_ops!
  232. secdbg: save_secdbg_img_func: entering
  233. secdbg: get_xloader_img_size: entering
  234. secdbg: get_xloader_img_size: exit
  235. secdbg: read_secdbg_img_from_emmc: entering
  236. secdbg: verify_secdbg_img: entering
  237. secdbg: verify_secdbg_img: magic value or version in Developer certificate are invalid.
  238. secdbg: read_secdbg_img_from_emmc: secdbg image verified failure
  239. secdbg: save_secdbg_img_func: read secure debug image failure
  240. usbloader: pre-save secure debug image fail!
  241. secureboot: SecBoot_WriteVRL: imageNamePtr:xloader, vrl_offset:0x00000000
  242. usbloader:
  243. partition 'xloader' updated
  244. usbloader: - OKAY
  245. reboot_reason: set_reboot_type is 0x00000013.
  246. usbloader: usb_rx_cmd_complete() 'getvar:slot-count', size is 0x00000011
  247. usbloader: usb_rx_cmd_complete() 'getvar:slot-suffixes', size is 0x00000014
  248. usbloader: usb_rx_cmd_complete() 'getvar:has-slot:fastboot', size is 0x00000018
  249. usbloader: usb_rx_cmd_complete() 'getvar:partition-type:fastboot', size is 0x0000001e
  250. usbloader: usb_rx_cmd_complete() 'getvar:max-download-size', size is 0x00000018
  251. usbloader: usb_rx_cmd_complete() 'download:00344800', size is 0x00000011
  252. usbloader: usb_rx_cmd_complete() 'flash:fastboot', size is 0x0000000e
  253. usbloader: writing 3426304 bytes to 'fastboot'...
  254. usbloader:
  255. partition 'fastboot' updated
  256. usbloader: - OKAY
  257. reboot_reason: set_reboot_type is 0x00000013.
  258. usbloader: usb_rx_cmd_complete() 'getvar:slot-count', size is 0x00000011
  259. usbloader: usb_rx_cmd_complete() 'getvar:slot-suffixes', size is 0x00000014
  260. usbloader: usb_rx_cmd_complete() 'getvar:has-slot:nvme', size is 0x00000014
  261. usbloader: usb_rx_cmd_complete() 'getvar:partition-type:nvme', size is 0x0000001a
  262. usbloader: usb_rx_cmd_complete() 'getvar:max-download-size', size is 0x00000018
  263. usbloader: usb_rx_cmd_complete() 'download:00020000', size is 0x00000011
  264. usbloader: usb_rx_cmd_complete() 'flash:nvme', size is 0x0000000a
  265. usbloader: writing 131072 bytes to 'nvme'...
  266. usbloader:
  267. partition 'nvme' updated
  268. usbloader: - OKAY
  269. reboot_reason: set_reboot_type is 0x00000013.
  270. usbloader: usb_rx_cmd_complete() 'getvar:slot-count', size is 0x00000011
  271. usbloader: usb_rx_cmd_complete() 'getvar:slot-suffixes', size is 0x00000014
  272. usbloader: usb_rx_cmd_complete() 'getvar:has-slot:fw_lpm3', size is 0x00000017
  273. usbloader: usb_rx_cmd_complete() 'getvar:partition-type:fw_lpm3', size is 0x0000001d
  274. usbloader: usb_rx_cmd_complete() 'getvar:max-download-size', size is 0x00000018
  275. usbloader: usb_rx_cmd_complete() 'download:00035100', size is 0x00000011
  276. usbloader: usb_rx_cmd_complete() 'flash:fw_lpm3', size is 0x0000000d
  277. usbloader: writing 217344 bytes to 'fw_lpm3'...
  278. usbloader:
  279. partition 'fw_lpm3' updated
  280. usbloader: - OKAY
  281. reboot_reason: set_reboot_type is 0x00000013.
  282. usbloader: usb_rx_cmd_complete() 'getvar:slot-count', size is 0x00000011
  283. usbloader: usb_rx_cmd_complete() 'getvar:slot-suffixes', size is 0x00000014
  284. usbloader: usb_rx_cmd_complete() 'getvar:has-slot:trustfirmware', size is 0x0000001d
  285. usbloader: usb_rx_cmd_complete() 'getvar:partition-type:trustfirmware', size is 0x00000023
  286. usbloader: usb_rx_cmd_complete() 'getvar:max-download-size', size is 0x00000018
  287. usbloader: usb_rx_cmd_complete() 'download:000245e8', size is 0x00000011
  288. usbloader: usb_rx_cmd_complete() 'flash:trustfirmware', size is 0x00000013
  289. usbloader: writing 148968 bytes to 'trustfirmware'...
  290. usbloader:
  291. partition 'trustfirmware' updated
  292. usbloader: - OKAY
  293. reboot_reason: set_reboot_type is 0x00000013.
RAW Paste Data