Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- cbx-1f07ec[25254]:~$ smartctl -a /dev/sda
- smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-87-generic] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Device Model: ZTC-SM201-064G
- Serial Number: 978042460012
- LU WWN Device Id: 0 000000 000000000
- Firmware Version: 1.74.00
- User Capacity: 64,023,257,088 bytes [64.0 GB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: Solid State Device
- Form Factor: 2.5 inches
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: Unknown(0x0ff8) (minor revision not indicated)
- SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Thu Feb 21 12:45:04 2019 GMT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (65535) seconds.
- Offline data collection
- capabilities: (0x79) SMART execute Offline immediate.
- No Auto Offline data collection support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 30) minutes.
- Conveyance self-test routine
- recommended polling time: ( 6) minutes.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
- 5 Reallocated_Sector_Ct 0x0000 100 100 000 Old_age Offline - 1
- 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1764
- 12 Power_Cycle_Count 0x0000 100 100 000 Old_age Offline - 21
- 160 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0
- 161 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0
- 163 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0
- 164 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 7918
- 165 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 24
- 166 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 1
- 167 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 17
- 192 Power-Off_Retract_Count 0x0000 100 100 000 Old_age Offline - 16
- 194 Temperature_Celsius 0x0000 100 100 000 Old_age Offline - 33
- 195 Hardware_ECC_Recovered 0x0000 100 100 000 Old_age Offline - 35861605
- 196 Reallocated_Event_Count 0x0000 100 100 000 Old_age Offline - 4
- 241 Total_LBAs_Written 0x0000 100 100 000 Old_age Offline - 6708
- 242 Total_LBAs_Read 0x0000 100 100 000 Old_age Offline - 527
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 1764 -
- SMART Selective self-test log data structure revision number 0
- Note: revision number not 1 implies that no selective self-test has ever been run
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement