SHARE
TWEET

NAS eTRAYz Xtreamer

a guest Aug 3rd, 2017 480 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. U-Boot 1.1.2 (Jan 19 2010 - 17:23:36)
  2.  
  3. U-Boot code: 48D00000 -> 48D1B860  BSS: -> 48D1F670
  4. RAM Configuration:
  5.         Bank #0: 48000000 128 MB
  6. SRAM Configuration:
  7.         128KB at 0x58000000
  8. Flash:  4 MB
  9. In:    serial
  10. Out:   serial
  11. Err:   serial
  12. Extinguish LED
  13. Light LED
  14. Initialising disks
  15. No FIS received from device 0
  16. No FIS received from device 0
  17. Detecting SATA busses:
  18. Bus 0: Found second device OK
  19.   Device 0: not available
  20.   Device 1: Model: SAMSUNG HD082GJ  Firm: JE100-19 Ser#: S0VPJ90P719445
  21.             Type: Hard Disk
  22.             Supports 48-bit addressing
  23.             Capacity: 76319.0 MB = 74.5 GB (156301488 x 512)
  24.  
  25. IDE read: device 1 block # 288, count 1 ... 1 blocks read: OK
  26. Hit any key to stop autoboot:  0
  27.  
  28. IDE device 0: not available
  29.  
  30. IDE device 0: not available
  31. Light LED
  32.  
  33. IDE device 1: Model: SAMSUNG HD082GJ  Firm: JE100-19 Ser#: S0VPJ90P719445
  34.             Type: Hard Disk
  35.             Supports 48-bit addressing
  36.             Capacity: 76319.0 MB = 74.5 GB (156301488 x 512)
  37. ... is now current device
  38.  
  39. IDE read: device 1 block # 290, count 5700 ... wait_dma_not_busy() Timed out of wait for DMA not busy
  40. wait_no_error() SATA core flagged error
  41. oxnas_sata_outb() Wait for ATA no-error timed-out
  42. Error (no IRQ) dev 1 blk 513: status 0x59
  43. 223 blocks read: ERROR
  44. Light LED
  45.  
  46. IDE device 1: Model: SAMSUNG HD082GJ  Firm: JE100-19 Ser#: S0VPJ90P719445
  47.             Type: Hard Disk
  48.             Supports 48-bit addressing
  49.             Capacity: 76319.0 MB = 74.5 GB (156301488 x 512)
  50. ... is now current device
  51.  
  52. IDE read: device 1 block # 57344, count 5700 ... wait_sata_command_not_busy() Timed out of wait for SATA command to finish
  53. wait_sata_command_not_busy() Timed out of wait for SATA command to finish
  54. wait_no_error() SATA core flagged error
  55. oxnas_sata_outb() Wait for ATA no-error timed-out
  56. No Powersaving mode 59
  57. wait_sata_command_not_busy() Timed out of wait for SATA command to finish
  58. wait_sata_command_not_busy() Timed out of wait for SATA command to finish
  59. wait_no_error() SATA core flagged error
  60. oxnas_sata_outb() Wait for ATA no-error timed-out
  61. Error (no IRQ) dev 1 blk 57344: status 0x59
  62. 0 blocks read: ERROR
  63. Light LED
  64. ## Booting image at 41020000 ...
  65.    Image Name:   Linux-2.6.24.4
  66.    Image Type:   ARM Linux Kernel Image (uncompressed)
  67.    Data Size:    1614872 Bytes =  1.5 MB
  68.    Load Address: 48008000
  69.    Entry Point:  48008000
  70.    Verifying Checksum ... OK
  71. OK
  72. ## Loading Ramdisk Image at 4a000000 ...
  73.    Image Name:   Ramdisk
  74.    Image Type:   ARM Linux RAMDisk Image (gzip compressed)
  75.    Data Size:    2262100 Bytes =  2.2 MB
  76.    Load Address: 00000000
  77.    Entry Point:  00000000
  78.    Verifying Checksum ... OK
  79.  
  80. Starting kernel ...
  81.  
  82. Uncompressing Linux...................................................................................................... done, booting the kernel.
  83. Linux version 2.6.24.4 (root@etrayz-build) (gcc version 4.2.1) #1 Tue Jan 19 17:28:40 KST 2010
  84. CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
  85. Machine: Oxsemi NAS
  86. Ignoring unrecognised tag 0x00000000
  87. Memory policy: ECC disabled, Data cache writeback
  88. CPU0: D VIVT write-back cache
  89. CPU0: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
  90. CPU0: D cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
  91. Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
  92. Kernel command line: console=ttyS0,115200 root=/dev/md0 ro mac_adr=0x00,0x1c,0x85,0x20,0x4a,0xfe mem=128M poweroutage=yes
  93. PID hash table entries: 512 (order: 9, 2048 bytes)
  94. Console: colour dummy device 80x30
  95. console [ttyS0] enabled
  96. Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  97. Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  98. Memory: 128MB = 128MB total
  99. Memory: 124316KB available (2940K code, 156K data, 108K init)
  100. Mount-cache hash table entries: 512
  101. CPU: Testing write buffer coherency: ok
  102. net_namespace: 64 bytes
  103. NET: Registered protocol family 16
  104. Number of DMA channels = 5, version = 4
  105. Allocating 891 SRAM generic DMA descriptors
  106. Chip Id: die-id 0x0dc9da7170c0 read back 0xbeefcafe
  107. PCI: bus0: Fast back to back transfers enabled
  108. SCSI subsystem initialized
  109. NET: Registered protocol family 2
  110. IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  111. TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  112. TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
  113. TCP: Hash tables configured (established 4096 bind 4096)
  114. TCP reno registered
  115. checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
  116. Freeing initrd memory: 2209K
  117. Init Macpower NT2-GIGA-NAS(OX810) GPIO driver...
  118. GPIO driver registered
  119. thermAndFan: initializing - ox810
  120. SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
  121. SGI XFS Quota Management subsystem
  122. io scheduler noop registered
  123. io scheduler anticipatory registered (default)
  124. io scheduler deadline registered
  125. io scheduler cfq registered
  126. Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
  127. â–’serial8250: ttyS0 at MMIO 0x44900000 (irq = 0) is a 16550A
  128. RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
  129. loop: module loaded
  130. Driver 'sd' needs updating - please use bus_type methods
  131. ox810sata: OX810 sata core.
  132. scsi0 : oxnassata
  133. ata1: SATA max UDMA/133 irq 18
  134. ata1: SATA link down (SStatus 0 SControl 300)
  135. ox810sata: OX810 sata core.
  136. scsi1 : oxnassata
  137. ata2: SATA max UDMA/133 irq 18
  138. ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  139. ata2.00: ATA-7: SAMSUNG HD082GJ, JE100-19, max UDMA7
  140. ata2.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 0/32)
  141. ata2.00: configured for UDMA/133
  142. scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD082GJ  JE10 PQ: 0 ANSI: 5
  143. sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
  144. sd 1:0:0:0: [sda] Write Protect is off
  145. sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
  146. sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
  147. sd 1:0:0:0: [sda] Write Protect is off
  148. sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
  149.  sda: sda1 sda2 sda3
  150. sd 1:0:0:0: [sda] Attached SCSI disk
  151. physmap platform flash device: 00400000 at 41000000
  152. physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
  153.  Amd/Fujitsu Extended Query Table at 0x0040
  154. physmap-flash.0: Swapping erase regions for broken CFI table.
  155. number of CFI chips: 1
  156. cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
  157. RedBoot partition parsing not available
  158. mice: PS/2 mouse device common for all mice
  159. i2c /dev entries driver
  160. rtc-ds1307 0-0068: rtc core: registered m41t00 as rtc0
  161. OXNAS bit-bash I2C driver initialisation OK
  162. md: linear personality registered for level -1
  163. md: raid0 personality registered for level 0
  164. md: raid1 personality registered for level 1
  165. device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
  166. TCP cubic registered
  167. NET: Registered protocol family 1
  168. NET: Registered protocol family 17
  169. rtc-ds1307 0-0068: setting system clock to 2017-08-03 18:31:58 UTC (1501785118)
  170. md: Autodetecting RAID arrays.
  171. md: Scanned 0 and added 0 devices.
  172. md: autorun ...
  173. md: ... autorun DONE.
  174. RAMDISK: Compressed image found at block 0
  175. VFS: Mounted root (ext2 filesystem).
  176. gmac: Unknown symbol mii_ethtool_sset
  177. gmac: Unknown symbol mii_check_media_ex
  178. gmac: Unknown symbol mii_check_link
  179. gmac: Unknown symbol mii_nway_restart
  180. gmac: Unknown symbol mii_ethtool_gset
  181. Probing for Synopsis GMAC, unit 0
  182. eth0: PHY is LSI ET1011C
  183. eth0: GMAC ver = 51, vendor ver = 17 at 0xe8000000, IRQ 8
  184. eth0: Found PHY at address 1, type 0x0282f014 -> 10/100/1000
  185. eth0: Ethernet addr: 00:1c:85:20:4a:fe
  186. eth0: PHY is LSI ET1011C
  187. CoPro: Programming start address as 0x9801e000 (basic adr = 0x9801e000)
  188. eth0: LSI ET1011C PHY no Rx clk workaround start
  189. Resetting GMAC
  190. eth0: LSI ET1011C PHY no Rx clk workaround end
  191. GMAC reset complete
  192. none scsi0
  193. sh: scsi1: unknown operand
  194. exist scsi1
  195. eth0: PHY is LSI ET1011C
  196. eth0: link down
  197. rtc_time        : 18:32:05
  198. rtc_date        : 2017-08-03
  199. 24hr            : yes
  200. Thu Aug  3 18:32:05 UTC 2017
  201. rtc_time        : 18:32:05
  202. rtc_date        : 2017-08-03
  203. 24hr            : yes
  204. Thu Aug  3 18:32:05 UTC 2017
  205. Thu Aug  3 18:32:05 2017  0.000000 seconds
  206. Thu Aug  3 18:32:05 2017  0.000000 seconds
  207. Thu Aug  3 18:32:05 UTC 2017
  208. Thu Aug  3 18:32:05 UTC 2017
  209. rdate: bad address 'time.bora.net'
  210. Thu Aug  3 18:32:05 2017  0.000000 seconds
  211. Thu Aug  3 18:32:06 2017  0.000000 seconds
  212. Thu Aug  3 18:32:05 UTC 2017
  213. /bin/sh: can't access tty; job control turned off
  214. / #
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top