ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdffec00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
ata1.00: 490350672 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e400
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e480
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e800
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e880
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ec00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.32 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f000
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.32 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.3
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
cpuidle: using governor ladder
ioatdma: Intel(R) QuickData Technology Driver 4.00
usb 2-5: new high speed USB device using ehci_hcd and address 2
ehci_urb_done called by io_watchdog handler
ehci_urb_done called by io_watchdog handler
ehci_urb_done called by io_watchdog handler
usb 2-5: New USB device found, idVendor=14af, idProduct=af01
usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-5: Product: 2GB eUSB-B
usb 2-5: Manufacturer: ATP
usb 2-5: SerialNumber: 9901011061151034
usb 2-5: configuration #1 chosen from 1 choice
scsi6 : SCSI emulation for USB Mass Storage devices
ehci_urb_done called by io_watchdog handler
ioatdma 0000:00:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ata1.00: configured for UDMA/133
scsi: waiting for bus probes to complete ...
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
scsi 6:0:0:0: Direct-Access     ATP      2GB eUSB-B       1100 PQ: 0 ANSI: 0 CCS

TCP bic registered
TCP cubic registered
TCP westwood registered
TCP dublin registered
TCP skipware_pc registered
TCP skipware_et registered
TCP highspeed registered
TCP hybla registered
TCP htcp registered
TCP vegas registered
TCP veno registered
TCP scalable registered
TCP lp registered
TCP yeah registered
TCP illinois registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
registered taskstats version 1
scsi: waiting for bus probes to complete ...
sd 6:0:0:0: Attached scsi generic sg0 type 0
sd 6:0:0:0: [sda] 4014080 512-byte logical blocks: (2.05 GB/1.91 GiB)
sd 6:0:0:0: [sda] Write Protect is off
sd 6:0:0:0: [sda] Assuming drive cache: write through
sd 6:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
sd 6:0:0:0: Embedded Enclosure Device
sd 6:0:0:0: [sda] Assuming drive cache: write through
sd 6:0:0:0: [sda] Attached SCSI disk
sd 6:0:0:0: Failed to get diagnostic page 0x8000002
sd 6:0:0:0: Failed to bind enclosure -19
rtc_cmos 00:03: setting system clock to 2017-04-07 19:48:32 UTC (1491594512)
Initalizing network drop monitor service
scsi 0:0:0:0: Direct-Access     ATA      WDC WD2503ABYX-0 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sdb] 490350672 512-byte logical blocks: (251 GB/233 GiB)
sd 0:0:0:0: Attached scsi generic sg1 type 0
sd 0:0:0:0: [sdb] Write Protect is off
sd 0:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO
 or FUA
 sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
sd 0:0:0:0: [sdb] Attached SCSI disk
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: WDC WD2503ABYX-01WERA0, 01.01S01, max UDMA/133
ata2.00: 490350672 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      WDC WD2503ABYX-0 01.0 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg2 type 0
sd 1:0:0:0: [sdc] 490350672 512-byte logical blocks: (251 GB/233 GiB)
sd 1:0:0:0: [sdc] Write Protect is off
sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO
 or FUA
 sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 >
sd 1:0:0:0: [sdc] Attached SCSI disk
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD2503ABYX-01WERA0, 01.01S01, max UDMA/133
ata3.00: 490350672 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      WDC WD2503ABYX-0 01.0 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg3 type 0
sd 2:0:0:0: [sdd] 490350672 512-byte logical blocks: (251 GB/233 GiB)
sd 2:0:0:0: [sdd] Write Protect is off
sd 2:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO
 or FUA
 sdd: sdd1 sdd2 sdd3 sdd4 < sdd5 sdd6 >
sd 2:0:0:0: [sdd] Attached SCSI disk
ata4: link is slow to respond, please be patient (ready=0)
ata4: COMRESET failed (errno=-16)
ata4: link is slow to respond, please be patient (ready=0)
ata4: COMRESET failed (errno=-16)
ata4: link is slow to respond, please be patient (ready=0)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
ata4: link is slow to respond, please be patient (ready=0)
ata4: COMRESET failed (errno=-16)
ata4: link is slow to respond, please be patient (ready=0)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: link is slow to respond, please be patient (ready=0)
ata4: COMRESET failed (errno=-16)
ata4: link is slow to respond, please be patient (ready=0)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata4.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
ata4: link is slow to respond, please be patient (ready=0)
ata4: COMRESET failed (errno=-16)
ata4: link is slow to respond, please be patient (ready=0)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
Freeing unused kernel memory: 1248k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1356k freed
Freeing unused kernel memory: 1256k freed
begin to do /sbimd: Autodetecting RAID arrays.
n/mdadm -As
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
udev: starting version 147
EDAC MC: Ver: 2.1.0 May  1 2015
EDAC MC0: Giving out device to 'i5100_edac.c' 'i5100': DEV 0000:00:10.1
Waiting for root device
Root la sha:bel found ROOT_1 sha1
Insmod of shad sha2ow.ko successful sha3
 sha4 < sha5 sha6 sha7 >
Shadow device ready
mount: /dev/sda5 already mounted or /sysroot busy
mount: /dev/sda5 already mounted or /sysroot busy
mount: /dev/sda5 already mounted or /sysroot busy
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sha5): mounted filesystem with ordered data mode
dracut: Remounting /dev/disk/by-label/ROOT_1 with -o noatime,ro
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sha5): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/sha5
EXT3-fs (sha5): using internal journal
dracut: Switching root
i2c /dev entries driver
No RSIS device node found, so exiting the RSIS.
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sha7): using internal journal
EXT3-fs (sha7): recovery complete
EXT3-fs (sha7): mounted filesystem with ordered data mode
Starting udev: udev: starting version 147
[  OK  ]
securetty: Couldn't open /etc/securetty: No such file or directory
Setting hostname localhost:  [  OK  ]
[/sbin/fsck.ext3 (1) -- /config] fsck.ext3 -a -a /dev/sha7
CONFIG: clean, 605/106848 files, 26383/426556 blocks
[  OK  ]
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sha7): using internal journal
EXT3-fs (sha7): mounted filesystem with ordered data mode
Checking Disk Firmware Revisions:
Starting SW Raid Arrays
Starting: var
md: md1 stopped.
md: bind<sdc3>
md: bind<sdd3>
md: bind<sdb3>
bio: create slab <bio-1> at 1
md/raid10:md1: active with 3 out of 4 devices
md1: detected capacity change from 0 to 17190617088
 md1: unknown partition table
Starting: swap
md: md2 stopped.
md: bind<sdc2>
md: bind<sdd2>
md: bind<sdb2>
md/raid10:md2: active with 3 out of 4 devices
md2: detected capacity change from 0 to 6448480256
 md2: unknown partition table
md: md0 stopped.
md: bind<sdc5>
md: bind<sdd5>
md: bind<sdb5>
md/raid10:md0: active with 3 out of 4 devices
md0: detected capacity change from 0 to 400011558912
 md0: unknown partition table
md: md3 stopped.
md: bind<sdc6>
md: bind<sdd6>
md: bind<sdb6>
md/raid10:md3: active with 3 out of 4 devices
md3: detected capacity change from 0 to 75705221120
 md3: unknown partition table
NOP
EXT3-fs (sha5): using internal journal
Updating the label cache file
Checking filesystems
[/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a -a /dev/sha2
BOOT_1: recovering journal
BOOT_1: clean, 35/33320 files, 65532/132928 blocks
[  OK  ]

[/sbin/fsck.ext3 (1) -- /bootmgr] fsck.ext3 -a -a /dev/sha1
BOOTMGR: recovering journal
BOOTMGR: clean, 132/65536 files, 70968/261884 blocks (check in 5 mounts)
[  OK  ]

[/sbin/fsck.ext3 (1) -- /config] fsck.ext3 -a -a /dev/sha7
CONFIG: clean, 605/106848 files, 26383/426556 blocks
[  OK  ]

[/sbin/fsck.ext3 (1) -- /var] fsck.ext3 -a -a /dev/md1
VAR: recovering journal
VAR: Clearing orphaned inode 1369112 (uid=0, gid=0, mode=040755, size=4096)
VAR: clean, 2728/2101152 files, 1100736/4196928 blocks
[  OK  ]

Mounting local filesystems:  kjournald starting.  Commit interval 5 seconds
EXT3-fs (sha2): using internal journal
EXT3-fs (sha2): mounted filesystem with ordered data mode
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sha1): warning: checktime reached, running e2fsck is recommended
EXT3-fs (sha1): using internal journal
EXT3-fs (sha1): mounted filesystem with ordered data mode
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sha7): using internal journal
EXT3-fs (sha7): mounted filesystem with ordered data mode
kjournald starting.  Commit interval 5 seconds
EXT3-fs (md1): warning: checktime reached, running e2fsck is recommended
EXT3-fs (md1): using internal journal
EXT3-fs (md1): mounted filesystem with ordered data mode
[  OK  ]
Enabling /etc/fstab swaps:  Adding 6297336k swap on /dev/md2.  Priority:-1 exten
ts:1 across:6297336k
[  OK  ]
shadow driver loaded
sha found
sha backing device attached
sha shadow device not attached
sha nsectors=4014080 nk=2007040 npages=501760
sha: /var/sha/store already exists; reuse it
mapping config.img to /dev/loop1
mounting /config on /dev/loop1
kjournald starting.  Commit interval 5 seconds
EXT3-fs (loop1): warning: maximal mount count reached, running e2fsck is recomme
nded
EXT3-fs (loop1): using internal journal
EXT3-fs (loop1): recovery complete
EXT3-fs (loop1): mounted filesystem with ordered data mode
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sha7): using internal journal
EXT3-fs (sha7): mounted filesystem with ordered data mode
Starting shadow prepopulation

real    1m8.909s
user    0m0.001s
sys     0m3.562s
Shadow prepopulaEXT3-fs (sha5): tion complete
using internal journal
Flash configuration ok
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave a
ddress 0x20, irq 0
ipmi: Found new BMC (man_id: 0x0019fd,  prod_id: 0x19e7, dev_id: 0x20)
IPMI kcs interface initialized
ipmi device interface
IPMI FW and SDR are up to date for this appliance
Checking virtualization bit and fan mode
0x97 already set
0x90 already set
0x90 already set
Skipping Firmware Checks!
Entering non-interactive startup
iptables: Applip_tables: (C) 2000-2006 Netfilter Core Team
ying firewall rules: [  OK  ]
Starting system logger: [  OK  ]
Starting irqbalance: [  OK  ]
MOBO base revision 400-00100
ro root=LABEL=ROOT_1 nmi_watchdog=0 crashkernel=40M console=tty0 console=ttyS0,9
600n8
6229
Cannot set new wake-on-lan settings: Operation not supported
  not setting wol
Cannot set new wake-on-lan settings: Operation not supported
  not setting wol
mknod: `/dev/rbtqosmod': File exists
net.ipv4.ip_local_port_range = 8000 63000
net.ipv4.ip_local_reserved_ports = 8080-8090,9002,9090
ipmi_sdr_maj_ver=6631
ipmi_sdr_min_ver=12
Temperature logging started.
ls: cannot access /proc/net/rdi: No such file or directory
Checking for unexpected shutdown
Detected unexpected shutdown!shadow driver loaded
sha found
sha backing device attached
Unable to open: /opt/rbt/etc/va_alarm.xmlUnable to open: /opt/rbt/etc/va_alarm.x
ml[Jan  1 00:00:00 8719 -1 /db/postgres INFO] {- -} Database unavailable : could
 not connect to server: No such file or directory
        Is the server running locally and accepting
        connections on Unix domain socket "/tmp/.s.PGSQL.5432"?
Shutting down system logger: [  OK  ]
Starting system logger: [  OK  ]
[Jan  1 00:00:00 8719 -1 /db/postgres INFO] {- -} Database unavailable : could n
ot connect to server: No such file or directory
        Is the server running locally and accepting
        connections on Unix domain socket "/tmp/.s.PGSQL.5432"?
Shutting down system logger: [  OK  ]
Starting system logger: [  OK  ]
Shutting down system logger: [  OK  ]
Starting system logger: [  OK  ]
Executing rsisinit: Starting pm: [  OK  ]
Starting net-linkreset.shStarting mcelog daemon

Starting softwatch:
Starting oom_profile:
Starting softwatch:

Riverbed SteelHead
amnesiac login: admin
Password:
Last login: Fri Apr  7 19:43:36 on ttyS0
amnesiac > en
amnesiac # show version
Product name:      rbt_sh
Product release:   9.0.1a
Build ID:          #1
Build date:        2015-05-01 13:00:07
Build arch:        x86_64
Built by:          mockbuild@bannow-worker1

Uptime:            7m 34s

Product model:     2050
System memory:     5897 MB used / 40 MB free / 5937 MB total
Number of CPUs:    4
CPU load averages: 3.27 / 2.47 / 1.26
amnesiac # show licenses
lines 1-23
Local: LK1-SH10BASE-0000-0000-1-FBAB-E4F4-9174
lines 2-24
   Index:       1
lines 3-25
   Feature:     SH10BASE
lines 4-26
   Valid:       yes
lines 5-27
   Active:      yes
lines 6-28
   Start date:
lines 7-29
   End date:
lines 8-30

lines 9-31
Local: LK1-SH10CIFS-0000-0000-1-FC45-7EE3-9F01
lines 10-32

lines 10-32/32 (END)

   Index:       2
   Feature:     SH10CIFS
   Valid:       yes
   Active:      yes
   Start date:
   End date:

Local: LK1-SH10EXCH-0000-0000-1-3DE3-C4BE-9ECC
   Index:       3
   Feature:     SH10EXCH
   Valid:       yes
   Active:      yes
   Start date:
   End date:


Local: LK1-MSPEC2050L-0000-0000-1-DF40-547E-CC23
   Index:       4
   Feature:     MSPEC2050L
   Valid:       yes
   Active:      yes
   Start date:
   End date:

amnesiac # show info
Current User:      admin

Status:            Critical
Config:            initial
Appliance Up Time: 8m 2s
Service Up Time:   2m 1s
Managed by CMC:    no
Temperature (C):   35

Serial:            C49YH000A11F8
Model:             2050 (2050L)
Revision:          A
Version:           9.0.1a
amnesiac #