SHARE
TWEET

Untitled

a guest Feb 16th, 2020 206 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. #
  2. # Sample configuration file for the Samba suite for Debian GNU/Linux.
  3. #
  4. #
  5. # This is the main Samba configuration file. You should read the
  6. # smb.conf(5) manual page in order to understand the options listed
  7. # here. Samba has a huge number of configurable options most of which
  8. # are not shown in this example
  9. #
  10. # Some options that are often worth tuning have been included as
  11. # commented-out examples in this file.
  12. #  - When such options are commented with ";", the proposed setting
  13. #    differs from the default Samba behaviour
  14. #  - When commented with "#", the proposed setting is the default
  15. #    behaviour of Samba but the option is considered important
  16. #    enough to be mentioned here
  17. #
  18. # NOTE: Whenever you modify this file you should run the command
  19. # "testparm" to check that you have not made any basic syntactic
  20. # errors.
  21.  
  22. #======================= Global Settings =======================
  23.  
  24. [global]
  25.  
  26. ## Browsing/Identification ###
  27.  
  28. # Change this to the workgroup/NT-domain name your Samba server will part of
  29.    workgroup = WORKGROUP
  30.  
  31. # Windows Internet Name Serving Support Section:
  32. # WINS Support - Tells the NMBD component of Samba to enable its WINS Server
  33. #   wins support = no
  34.  
  35. # WINS Server - Tells the NMBD components of Samba to be a WINS Client
  36. # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
  37. ;   wins server = w.x.y.z
  38.  
  39. # This will prevent nmbd to search for NetBIOS names through DNS.
  40.    dns proxy = no
  41.  
  42. #### Networking ####
  43.  
  44. # The specific set of interfaces / networks to bind to
  45. # This can be either the interface name or an IP address/netmask;
  46. # interface names are normally preferred
  47. ;   interfaces = 127.0.0.0/8 eth0
  48.  
  49. # Only bind to the named interfaces and/or networks; you must use the
  50. # 'interfaces' option above to use this.
  51. # It is recommended that you enable this feature if your Samba machine is
  52. # not protected by a firewall or is a firewall itself.  However, this
  53. # option cannot handle dynamic or non-broadcast interfaces correctly.
  54. ;   bind interfaces only = yes
  55.  
  56.  
  57.  
  58. #### Debugging/Accounting ####
  59.  
  60. # This tells Samba to use a separate log file for each machine
  61. # that connects
  62.    log file = /var/log/samba/log.%m
  63.  
  64. # Cap the size of the individual log files (in KiB).
  65.    max log size = 1000
  66.  
  67. # If you want Samba to only log through syslog then set the following
  68. # parameter to 'yes'.
  69. #   syslog only = no
  70.  
  71. # We want Samba to log a minimum amount of information to syslog. Everything
  72. # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
  73. # through syslog you should set the following parameter to something higher.
  74.    syslog = 0
  75.  
  76. # Do something sensible when Samba crashes: mail the admin a backtrace
  77.    panic action = /usr/share/samba/panic-action %d
  78.  
  79.  
  80. ####### Authentication #######
  81.  
  82. # Server role. Defines in which mode Samba will operate. Possible
  83. # values are "standalone server", "member server", "classic primary
  84. # domain controller", "classic backup domain controller", "active
  85. # directory domain controller".
  86. #
  87. # Most people will want "standalone sever" or "member server".
  88. # Running as "active directory domain controller" will require first
  89. # running "samba-tool domain provision" to wipe databases and create a
  90. # new domain.
  91.    server role = standalone server
  92.  
  93. # If you are using encrypted passwords, Samba will need to know what
  94. # password database type you are using.  
  95.    passdb backend = tdbsam
  96.  
  97.    obey pam restrictions = yes
  98.  
  99. # This boolean parameter controls whether Samba attempts to sync the Unix
  100. # password with the SMB password when the encrypted SMB password in the
  101. # passdb is changed.
  102.    unix password sync = yes
  103.  
  104. # For Unix password sync to work on a Debian GNU/Linux system, the following
  105. # parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
  106. # sending the correct chat script for the passwd program in Debian Sarge).
  107.    passwd program = /usr/bin/passwd %u
  108.    passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
  109.  
  110. # This boolean controls whether PAM will be used for password changes
  111. # when requested by an SMB client instead of the program listed in
  112. # 'passwd program'. The default is 'no'.
  113.    pam password change = yes
  114.  
  115. # This option controls how unsuccessful authentication attempts are mapped
  116. # to anonymous connections
  117.    map to guest = bad user
  118.  
  119. ########## Domains ###########
  120.  
  121. #
  122. # The following settings only takes effect if 'server role = primary
  123. # classic domain controller', 'server role = backup domain controller'
  124. # or 'domain logons' is set
  125. #
  126.  
  127. # It specifies the location of the user's
  128. # profile directory from the client point of view) The following
  129. # required a [profiles] share to be setup on the samba server (see
  130. # below)
  131. ;   logon path = \\%N\profiles\%U
  132. # Another common choice is storing the profile in the user's home directory
  133. # (this is Samba's default)
  134. #   logon path = \\%N\%U\profile
  135.  
  136. # The following setting only takes effect if 'domain logons' is set
  137. # It specifies the location of a user's home directory (from the client
  138. # point of view)
  139. ;   logon drive = H:
  140. #   logon home = \\%N\%U
  141.  
  142. # The following setting only takes effect if 'domain logons' is set
  143. # It specifies the script to run during logon. The script must be stored
  144. # in the [netlogon] share
  145. # NOTE: Must be store in 'DOS' file format convention
  146. ;   logon script = logon.cmd
  147.  
  148. # This allows Unix users to be created on the domain controller via the SAMR
  149. # RPC pipe.  The example command creates a user account with a disabled Unix
  150. # password; please adapt to your needs
  151. ; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
  152.  
  153. # This allows machine accounts to be created on the domain controller via the
  154. # SAMR RPC pipe.  
  155. # The following assumes a "machines" group exists on the system
  156. ; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u
  157.  
  158. # This allows Unix groups to be created on the domain controller via the SAMR
  159. # RPC pipe.  
  160. ; add group script = /usr/sbin/addgroup --force-badname %g
  161.  
  162. ############ Misc ############
  163.  
  164. # Using the following line enables you to customise your configuration
  165. # on a per machine basis. The %m gets replaced with the netbios name
  166. # of the machine that is connecting
  167. ;   include = /home/samba/etc/smb.conf.%m
  168.  
  169. # Some defaults for winbind (make sure you're not using the ranges
  170. # for something else.)
  171. ;   idmap uid = 10000-20000
  172. ;   idmap gid = 10000-20000
  173. ;   template shell = /bin/bash
  174.  
  175. # Setup usershare options to enable non-root users to share folders
  176. # with the net usershare command.
  177.  
  178. # Maximum number of usershare. 0 (default) means that usershare is disabled.
  179. ;   usershare max shares = 100
  180.  
  181. # Allow users who've been granted usershare privileges to create
  182. # public shares, not just authenticated ones
  183.    usershare allow guests = yes
  184.  
  185. #======================= Share Definitions =======================
  186.  
  187. [public]
  188.        path = /data/public
  189.        valid users = nobody
  190.        read only = No
  191.        #create mask = 0777
  192.        #directory mask = 0777
  193.        browseable = yes
  194.        writeable = yes
  195.        guest ok = yes
  196.        public = yes
  197.        available = yes
  198.        comment = Public
  199.        printable = no
  200.  
  201. [ocMirror]
  202.     path = /data/minecraft/projectOC_2.0/world/opencomputers
  203.     valid users = nobody
  204.     read only = NO
  205.        browseable = yes
  206.        writeable = yes
  207.        guest ok = yes
  208.        public = yes
  209.        available = yes
  210.        comment = Mirror
  211.        printable = no
  212.     force user = noname
  213.  
  214. [nosPoMirror]
  215.         path = /data/minecraft/nosPo/world/opencomputers
  216.         valid users = nobody
  217.         read only = NO
  218.        browseable = yes
  219.        writeable = yes
  220.        guest ok = yes
  221.        public = yes
  222.        available = yes
  223.        comment = Mirror
  224.        printable = no
  225.         force user = noname
  226.  
  227.  
  228. #end of file
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
Top