Guest User

Untitled

a guest
Feb 27th, 2016
1,318
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. baudrate=115200
  2. boot_fastboot=fastboot
  3. boot_normal=fatload mmc 2:1 0x43000000 script.bin;fatload mmc 2:1 40007800 uimage;bootm 40007800
  4. boot_recovery=sunxi_flash read 40007800 recovery;boota 40007800
  5. bootcmd=run setargs_mmc boot_normal
  6. bootdelay=3
  7. console=ttyS0,115200
  8. init=/init
  9. loglevel=8
  10. mmc_root=/dev/mmcblk2p2
  11. nand_root=/dev/nandd
  12. setargs_mmc=setenv bootargs console=${console} root=${mmc_root} init=${init} loglevel=${loglevel} partitions=${partitions}
  13. setargs_nand=setenv bootargs console=${console} root=${nand_root}init=${init} loglevel=${loglevel} partitions=${partitions}
  14. stderr=serial
  15. stdin=serial
  16. stdout=serial
  17.  
  18. Environment size: 657/131068 bytes
  19.  
  20.  
  21. boot0 version : 4.0.0
  22. fel_flag = 0x00000000
  23. rtc[0] value = 0x00000000
  24. rtc[1] value = 0x00000000
  25. rtc[2] value = 0x00000000
  26. rtc[3] value = 0x00000000
  27. rtc[4] value = 0x00000000
  28. rtc[5] value = 0x00000000
  29. rtc[6] value = 0x00000000
  30. rtc[7] value = 0x00000000
  31. DRAM DRIVE INFO: V0.8
  32. DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
  33. DRAM CLK = 672 MHz
  34. DRAM zq value: 003b3bfb
  35. READ DQS LCDL = 001c1c1c
  36. DRAM SIZE =1024 M
  37. odt delay
  38. dram size =1024
  39. card boot number = 2
  40. card no is 2
  41. sdcard 2 line count 8
  42. [mmc]: mmc driver ver 2014-12-10 21:20:39
  43. [mmc]: ***Try SD card 2***
  44. [mmc]: mmc 2 cmd 8 err 00000100
  45. [mmc]: mmc 2 cmd 8 err 00000100
  46. [mmc]: mmc 2 send if cond failed
  47. [mmc]: mmc 2 cmd 55 err 00000100
  48. [mmc]: mmc 2 cmd 55 err 00000100
  49. [mmc]: mmc 2 send app cmd failed
  50. [mmc]: ***Try MMC card 2***
  51. [mmc]: 8bit ddr!!!
  52. [mmc]: MMC ver 4.5
  53. [mmc]: SD/MMC Card: 8bit, capacity: 7475MB
  54. [mmc]: vendor: Man 00880103 Snr 20d90005
  55. [mmc]: product: NCard
  56. [mmc]: revision: 2.0
  57. [mmc]: ***SD/MMC 2 init OK!!!***
  58. sdcard 2 init ok
  59. The size of uboot is 000dc000.
  60. sum=f2e675e8
  61. src_sum=f2e675e8
  62. set_mmc_para,sdly 50M 0
  63. set_mmc_para,sdly 25M 0
  64. Succeed in loading uboot from sdmmc flash.
  65. Ready to disable icache.
  66. Jump to secend Boot.
  67. SUNXI_NORMAL_MODE
  68. [ 0.255]e mode
  69.  
  70. U-Boot 2011.09-rc1 (Jun 21 2015 - 19:46:23) Allwinner Technology
  71.  
  72. [ 0.262]version: 1.1.0
  73. normal mode
  74. [ 0.269]pmbus: ready
  75. not set main pmu id
  76. axp_probe error
  77. [ 0.284]PMU: pll1 1200 Mhz,PLL6=600 Mhz
  78. AXI=400 Mhz,AHB=200 Mhz, APB1=100 Mhz
  79. sid read already
  80. fel key new mode
  81. run key detect
  82. no key found
  83. no key input
  84. dram_para_set start
  85. dram_para_set end
  86. normal mode
  87. [ 0.314]DRAM: 1 GiB
  88. relocation Offset is: 35af9000
  89. [box standby] read rtc = 0x0
  90. [box_start_os] mag be start_type no use
  91. user_gpio config
  92. user_gpio ok
  93. gic: normal or no secure os mode
  94. workmode = 0
  95. MMC: 2
  96. [ 0.388][mmc]: mmc driver ver 2014-12-10 9:23:00
  97. [ 0.393][mmc]: get sdc_phy_wipe fail.
  98. [ 0.397][mmc]: get sdc0 sdc_erase fail.
  99. [ 0.401][mmc]: get sdc_2xmode ok, val = 1
  100. [ 0.405][mmc]: get sdc_ddrmode ok, val = 1
  101. [ 0.409][mmc]: get sdc_f_max fail,use default 50000000Hz
  102. [ 0.415][mmc]: get card_line ok, card_line = 8
  103. [ 0.419][mmc]: get sdc_ex_dly_used fail,use default
  104. [ 0.424][mmc]: SUNXI SD/MMC: 2
  105. [ 0.438][mmc]: *Try SD card 2*
  106. [ 0.441][mmc]: mmc 2 cmd 8 err 100
  107. [ 0.447][mmc]: mmc send if cond failed
  108. [ 0.451][mmc]: mmc 2 cmd 55 err 100
  109. [ 0.456][mmc]: send app cmd failed
  110. [ 0.459][mmc]: *Try MMC card 2*
  111. [ 0.501][mmc]: ddr8
  112. [ 0.515][mmc]: CID 0x8801034e 0x43617264 0x2020d900 0x5223281
  113. [ 0.520][mmc]: MMC ver 4.5
  114. [ 0.523][mmc]: mmc clk 50000000
  115. [ 0.526][mmc]: SD/MMC Card: 8bit, capacity: 7475MB
  116. [ 0.531][mmc]: boot0 capacity: 4000KB,boot1 capacity: 4000KB
  117. [ 0.537][mmc]: ***SD/MMC 2 init OK!!!***
  118. [ 0.542][mmc]: erase_grp_size:0x400WrBlk * 0x200 = 0x80000 Byte
  119. [ 0.548][mmc]: secure_feature 0x15
  120. [ 0.551][mmc]: secure_removal_type 0x0
  121. [ 0.555]sunxi flash init ok
  122. script config pll_de to 864 Mhz
  123. Not Found clk pll_video1 in script
  124. script config pll_video to 297 Mhz
  125. [boot]disp_init_tv
  126. [DISP_TV] disp_init_tv enter g_tv_used
  127. screen 0 do not support TV TYPE!
  128. [BOOOT_DISP_TV] disp tv device_registered
  129. unable to find regulator vcc-hdmi-18 from [pmu1_regu] or [pmu2_regu]
  130. enable power vcc-hdmi-18, ret=-1
  131. DRV_DISP_Init end
  132. boot_disp.auto_hpd=1
  133. auto hpd check has 0 times!
  134. [disk_read_fs] no the partition
  135. error: open disp_rsl.fex, maybe it is not exist
  136. attched ok, mgr0<-->device0, type=4, mode=4----
  137. ready to set mode
  138. [ 1.435]finally, output_type=0x4, output_mode=0x4, screen_id=0x0, disp_para=0x404
  139. fail to find part named env
  140. Using default environment
  141.  
  142. In: serial
  143. Out: serial
  144. Err: serial
  145. --------fastboot partitions--------
  146. mbr not exist
  147. base bootcmd=run setargs_mmc boot_normal
  148. bootcmd set setargs_mmc
  149. key 0
  150. cant find rcvy value
  151. cant find fstbt value
  152. no misc partition is found
  153. to be run cmd=run setargs_mmc boot_normal
  154. the secure storage map is empty
  155. the private part isn't exist
  156. WORK_MODE_BOOT
  157. adver not need show
  158. sunxi_bmp_logo_display
  159. [disk_read_fs] no the partition
  160. error: open bootlogo.bmp, maybe it is not exist
  161. sunxi bmp info error : unable to open logo file bootlogo.bmp
  162. [ 1.497]Hit any key to stop autoboot: 0
  163. [ 4.755][mmc]: blkcnt should not be 0
  164. ## Booting kernel from Legacy Image at 40007800 ...
  165. Image Name: Armbian-sun8i-3.4.110
  166. Image Type: ARM Linux Kernel Image (uncompressed)
  167. Data Size: 4826712 Bytes = 4.6 MiB
  168. Load Address: 40008000
  169. Entry Point: 40008000
  170. Verifying Checksum ... OK
  171. Loading Kernel Image ... OK
  172. OK
  173. [ 4.949][mmc]: mmc exit start
  174. [ 4.969][mmc]: mmc 2 cmd 8 err 100
  175. [ 4.974][mmc]: mmc send if cond failed
  176. [ 4.978][mmc]: mmc 2 cmd 55 err 100
  177. [ 4.983][mmc]: send app cmd failed
  178. [ 4.995][mmc]: get sdc_phy_wipe fail.
  179. [ 4.999][mmc]: get sdc0 sdc_erase fail.
  180. [ 5.002][mmc]: get sdc_2xmode ok, val = 1
  181. [ 5.007][mmc]: get sdc_ddrmode ok, val = 1
  182. [ 5.011][mmc]: get sdc_f_max fail,use default 50000000Hz
  183. [ 5.016][mmc]: get card_line ok, card_line = 8
  184. [ 5.021][mmc]: get sdc_ex_dly_used fail,use default
  185. [ 5.026][mmc]: mmc 2 exit ok
  186. [ 5.029]
  187. Starting kernel ...
  188.  
  189. [sun8i_fixup]: From boot, get meminfo:
  190. Start: 0x40000000
  191. Size: 1024MB
  192. ion_carveout reserve: 160m@0 256m@0 130m@1 200m@1
  193. ion_reserve_common: ion reserve: [0x70000000, 0x80000000]!
  194. [ 0.000000] Booting Linux on physical CPU 0
  195. [ 0.000000] Initializing cgroup subsys cpuset
  196. [ 0.000000] Initializing cgroup subsys cpu
  197. [ 0.000000] Linux version 3.4.110-sun8i (root@production) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-16ubuntu4) ) #12 SMP PREEMPT Sat Feb 27 16:51:29 CET 2016
  198. [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  199. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  200. [ 0.000000] Machine: sun8i
  201. [ 0.000000] cma: CMA: reserved 256 MiB at 70000000
  202. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  203. [ 0.000000] On node 0 totalpages: 262144
  204. [ 0.000000] free_area_init_node: node 0, pgdat c09d62c0, node_mem_map c0ac4000
  205. [ 0.000000] Normal zone: 1710 pages used for memmap
  206. [ 0.000000] Normal zone: 0 pages reserved
  207. [ 0.000000] Normal zone: 192850 pages, LIFO batch:31
  208. [ 0.000000] HighMem zone: 594 pages used for memmap
  209. [ 0.000000] HighMem zone: 66990 pages, LIFO batch:15
  210. [ 0.000000] script_init enter!
  211. [ 0.000000] script_init exit!
  212. [ 0.000000] PERCPU: Embedded 8 pages/cpu @c13db000 s11904 r8192 d12672 u32768
  213. [ 0.000000] pcpu-alloc: s11904 r8192 d12672 u32768 alloc=8*4096
  214. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  215. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259840
  216. [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk2p2 init=/init loglevel=8 partitions=
  217. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  218. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  219. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  220. [ 0.000000] allocated 2097152 bytes of page_cgroup
  221. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  222. [ 0.000000] Memory: 1024MB = 1024MB total
  223. [ 0.000000] Memory: 762872k/762872k available, 285704k reserved, 8192K highmem
  224. [ 0.000000] Virtual kernel memory layout:
  225. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  226. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  227. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  228. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  229. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  230. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  231. [ 0.000000] .text : 0xc0008000 - 0xc0914884 (9267 kB)
  232. [ 0.000000] .init : 0xc0915000 - 0xc0961e80 ( 308 kB)
  233. [ 0.000000] .data : 0xc0962000 - 0xc09db110 ( 485 kB)
  234. [ 0.000000] .bss : 0xc09db8c4 - 0xc0ac3a18 ( 929 kB)
  235. [ 0.000000] Preemptible hierarchical RCU implementation.
  236. [ 0.000000] Additional per-CPU info printed with stalls.
  237. [ 0.000000] NR_IRQS:544
  238. [ 0.000000] Architected local timer running at 24.00MHz.
  239. [ 0.000000] Switching to timer-based delay loop
  240. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  241. [ 0.000000] Console: colour dummy device 80x30
  242. [ 0.000185] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
  243. [ 0.000207] pid_max: default: 32768 minimum: 301
  244. [ 0.000499] Mount-cache hash table entries: 512
  245. [ 0.001375] Initializing cgroup subsys cpuacct
  246. [ 0.001389] Initializing cgroup subsys memory
  247. [ 0.001428] Initializing cgroup subsys devices
  248. [ 0.001439] Initializing cgroup subsys freezer
  249. [ 0.001449] Initializing cgroup subsys blkio
  250. [ 0.001471] Initializing cgroup subsys perf_event
  251. [ 0.001521] CPU: Testing write buffer coherency: ok
  252. [ 0.001560] ftrace: allocating 25349 entries in 75 pages
  253. [ 0.030258] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  254. [ 0.030275] [sunxi_smp_prepare_cpus] enter
  255. [ 0.030307] Setting up static identity map for 0x406834d8 - 0x40683530
  256. [ 0.031113] CPU1: Booted secondary processor
  257. [ 0.031113] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  258. [ 0.031243] CPU2: Booted secondary processor
  259. [ 0.031243] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  260. [ 0.031243] CPU3: Booted secondary processor
  261. [ 0.031243] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  262. [ 0.040165] Brought up 4 CPUs
  263. [ 0.040180] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
  264. [ 0.040792] devtmpfs: initialized
  265. [ 0.043111] wakeup src cnt is : 2.
  266. [ 0.043122] [exstandby]leave extended_standby_enable_wakeup_src : event 0x800000
  267. [ 0.043132] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x0
  268. [ 0.043143] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x40
  269. [ 0.043153] [exstandby]leave extended_standby_enable_wakeup_src : event 0x800000
  270. [ 0.043163] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x8
  271. [ 0.043173] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x40
  272. [ 0.043184] sunxi pm init
  273. [ 0.043312] pinctrl core: initialized pinctrl subsystem
  274. [ 0.053656] NET: Registered protocol family 16
  275. [ 0.054245] DMA: preallocated 2048 KiB pool for atomic coherent allocations
  276. [ 0.054245] script_sysfs_init success
  277. [ 0.054245] sunxi_dump_init success
  278. [ 0.054245] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
  279. [ 0.054245] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
  280. [ 0.054245] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  281. [ 0.054245] hw-breakpoint: maximum watchpoint size is 8 bytes.
  282. [ 0.054270] script config pll_video to 297 Mhz
  283. [ 0.054284] script config pll_de to 864 Mhz
  284. [ 0.054296] script config pll_ve to 402 Mhz
  285. [ 0.054321] sunxi_default_clk_init
  286. [ 0.054329] try to set pll6ahb1 to 200000000
  287. [ 0.054346] try to set ahb clk source to pll6ahb1
  288. [ 0.054354] set ahb clk source to pll6ahb1
  289. [ 0.054363] try to set ahb1 to 200000000
  290. [ 0.054373] try to set apb1 to 100000000
  291. [ 0.054682] ===fe3o4==== sunxi_root_procfs_attach ret:0
  292. [ 0.060204] bio: create slab <bio-0> at 0
  293. [ 0.060268] [ARISC] :sunxi-arisc driver v1.04
  294. [ 0.074100] [ARISC] :arisc version: [v0.1.34]
  295. [ 0.162234] [ARISC] :sunxi-arisc driver v1.04 startup succeeded
  296. [ 0.170388] SCSI subsystem initialized
  297. [ 0.170565] usbcore: registered new interface driver usbfs
  298. [ 0.170630] usbcore: registered new interface driver hub
  299. [ 0.170654] usbcore: registered new device driver usb
  300. [ 0.170654] twi_chan_cfg()335 - [twi0] has no twi_regulator.
  301. [ 0.170654] twi_chan_cfg()335 - [twi1] has no twi_regulator.
  302. [ 0.170654] twi_chan_cfg()335 - [twi2] has no twi_regulator.
  303. [ 0.170680] Linux video capture interface: v2.00
  304. [ 0.170875] Advanced Linux Sound Architecture Driver Version 1.0.25.
  305. [ 0.171522] cfg80211: Calling CRDA to update world regulatory domain
  306. [ 0.171577] Switching to clocksource arch_sys_counter
  307. [ 0.182443] FS-Cache: Loaded
  308. [ 0.182697] CacheFiles: Loaded
  309. [ 0.192450] NET: Registered protocol family 2
  310. [ 0.202746] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  311. [ 0.203270] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  312. [ 0.204750] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  313. [ 0.205583] TCP: Hash tables configured (established 131072 bind 65536)
  314. [ 0.205593] TCP: reno registered
  315. [ 0.205605] UDP hash table entries: 512 (order: 2, 16384 bytes)
  316. [ 0.205639] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  317. [ 0.205949] NET: Registered protocol family 1
  318. [ 0.206293] RPC: Registered named UNIX socket transport module.
  319. [ 0.206304] RPC: Registered udp transport module.
  320. [ 0.206312] RPC: Registered tcp transport module.
  321. [ 0.206320] RPC: Registered tcp NFSv4.1 backchannel transport module.
  322. <6>[ 0.206568] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available
  323. [ 0.206659] sunxi_reg_init enter
  324. [ 0.207355] audit: initializing netlink socket (disabled)
  325. [ 0.207391] type=2000 audit(0.200:1): initialized
  326. [ 0.208314] highmem bounce pool size: 64 pages
  327. [ 0.209110] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  328. [ 0.209211] NFS: Registering the id_resolver key type
  329. [ 0.209521] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  330. [ 0.210210] NTFS driver 2.1.30 [Flags: R/W].
  331. [ 0.210485] fuse init (API version 7.18)
  332. [ 0.211132] Btrfs loaded
  333. [ 0.211155] msgmni has been set to 1473
  334. [ 0.212312] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  335. [ 0.212329] io scheduler noop registered
  336. [ 0.212337] io scheduler deadline registered
  337. [ 0.212397] io scheduler cfq registered (default)
  338. [ 0.212799] [DISP]disp_module_init
  339. [ 0.228749] [DISP] Fb_map_kernel_logo,line:931:Fb_map_kernel_logo failed!
  340. [ 0.260635] Console: switching to colour frame buffer device 240x67
  341. [ 0.293223] [DISP]disp_module_init finish
  342. [ 0.293430] sw_uart_get_devinfo()1503 - uart0 has no uart_regulator.
  343. [ 0.293446] sw_uart_get_devinfo()1503 - uart2 has no uart_regulator.
  344. [ 0.293459] sw_uart_get_devinfo()1503 - uart3 has no uart_regulator.
  345. [ 0.293878] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
  346. [ 0.293890] sw_uart_pm()890 - uart0 clk is already enable
  347. [ 0.293907] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n
  348. [ 0.485506] console [ttyS0] enabled
  349. [ 0.581387] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI
  350. [ 0.800340] uart3: ttyS3 at MMIO 0x1c28c00 (irq = 35) is a SUNXI
  351. [ 0.800827] sunxi_cmatest_init enter
  352. [ 0.800864] sunxi_cmatest_init success
  353. [ 0.804599] loop: module loaded
  354. [ 0.868193] sunxi_spi_chan_cfg()1355 - [spi-0] has no spi_regulator.
  355. [ 0.868205] sunxi_spi_chan_cfg()1355 - [spi-1] has no spi_regulator.
  356. [ 0.868665] spi spi0: master is unqueued, this is deprecated
  357. [ 0.868933] tun: Universal TUN/TAP device driver, 1.6
  358. [ 0.868941] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  359. [ 0.869990] PPP generic driver version 2.4.2
  360. [ 0.870182] PPP BSD Compression module registered
  361. [ 0.870190] PPP Deflate Compression module registered
  362. [ 0.870879] PPP MPPE Compression module registered
  363. [ 0.870891] NET: Registered protocol family 24
  364. [ 0.870946] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  365. [ 0.891022] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  366. [ 0.891050] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
  367. [ 0.964042] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
  368. [ 1.170063] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
  369. [ 1.351576] hub 1-0:1.0: USB hub found
  370. [ 1.355743] hub 1-0:1.0: 1 port detected
  371. [ 1.380445] sunxi-ehci sunxi-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  372. [ 1.389337] sunxi-ehci sunxi-ehci.2: new USB bus registered, assigned bus number 2
  373. [ 1.398198] sunxi-ehci sunxi-ehci.2: irq 106, io mem 0xf1c1b000
  374. [ 1.420025] sunxi-ehci sunxi-ehci.2: USB 0.0 started, EHCI 1.00
  375. [ 1.426592] ehci_irq: highspeed device connect
  376. [ 1.432012] hub 2-0:1.0: USB hub found
  377. [ 1.436176] hub 2-0:1.0: 1 port detected
  378. [ 1.460858] sunxi-ehci sunxi-ehci.4: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  379. [ 1.469754] sunxi-ehci sunxi-ehci.4: new USB bus registered, assigned bus number 3
  380. [ 1.478584] sunxi-ehci sunxi-ehci.4: irq 110, io mem 0xf1c1d000
  381. [ 1.500032] sunxi-ehci sunxi-ehci.4: USB 0.0 started, EHCI 1.00
  382. [ 1.506597] ehci_irq: highspeed device connect
  383. [ 1.512020] hub 3-0:1.0: USB hub found
  384. [ 1.516182] hub 3-0:1.0: 1 port detected
  385. [ 1.520876] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  386. [ 1.547769] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  387. [ 1.556286] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 4
  388. [ 1.564713] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
  389. [ 1.634490] hub 4-0:1.0: USB hub found
  390. [ 1.638654] hub 4-0:1.0: 1 port detected
  391. [ 1.663403] sunxi-ohci sunxi-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  392. [ 1.671924] sunxi-ohci sunxi-ohci.2: new USB bus registered, assigned bus number 5
  393. [ 1.680355] sunxi-ohci sunxi-ohci.2: irq 107, io mem 0xf1c1b400
  394. [ 1.744509] hub 5-0:1.0: USB hub found
  395. [ 1.748674] hub 5-0:1.0: 1 port detected
  396. [ 1.760035] usb 2-1: new high-speed USB device number 2 using sunxi-ehci
  397. [ 1.773326] sunxi-ohci sunxi-ohci.4: SW USB2.0 'Open' Host Controller (OHCI) Driver
  398. [ 1.781841] sunxi-ohci sunxi-ohci.4: new USB bus registered, assigned bus number 6
  399. [ 1.790271] sunxi-ohci sunxi-ohci.4: irq 111, io mem 0xf1c1d400
  400. [ 1.854477] hub 6-0:1.0: USB hub found
  401. [ 1.858640] hub 6-0:1.0: 1 port detected
  402. [ 1.863314] Initializing USB Mass Storage driver...
  403. [ 1.868875] usbcore: registered new interface driver usb-storage
  404. [ 1.875549] USB Mass Storage support registered.
  405. [ 1.880720] usbcore: registered new interface driver ums-alauda
  406. [ 1.887314] usbcore: registered new interface driver ums-cypress
  407. [ 1.894019] usbcore: registered new interface driver ums-datafab
  408. [ 1.900724] usbcore: registered new interface driver ums_eneub6250
  409. [ 1.907609] usbcore: registered new interface driver ums-freecom
  410. [ 1.914316] usbcore: registered new interface driver ums-isd200
  411. [ 1.915426] hub 2-1:1.0: USB hub found
  412. [ 1.915557] hub 2-1:1.0: 4 ports detected
  413. [ 1.929509] usbcore: registered new interface driver ums-jumpshot
  414. [ 1.936312] usbcore: registered new interface driver ums-karma
  415. [ 1.942827] usbcore: registered new interface driver ums-onetouch
  416. [ 1.949627] usbcore: registered new interface driver ums-realtek
  417. [ 1.956344] usbcore: registered new interface driver ums-sddr09
  418. [ 1.962996] usbcore: registered new interface driver ums-sddr55
  419. [ 1.969600] usbcore: registered new interface driver ums-usbat
  420. [ 1.976374] file system registered
  421. [ 1.981731] android_usb gadget: Mass Storage Function, version: 2009/09/11
  422. [ 1.989357] android_usb gadget: Number of LUNs=3
  423. [ 1.994498] lun0: LUN: removable file: (no medium)
  424. [ 1.999906] lun1: LUN: removable file: (no medium)
  425. [ 2.005322] lun2: LUN: removable file: (no medium)
  426. [ 2.011043] android_usb gadget: android_usb ready
  427. [ 2.016454] uinput result 0 , vmouse_init
  428. [ 2.021657] mousedev: PS/2 mouse device common for all mice
  429. [ 2.028505] ls_fetch_sysconfig_para: type err device_used = -1073054916.
  430. [ 2.030089] usb 3-1: new high-speed USB device number 2 using sunxi-ehci
  431. [ 2.043575] =========script_get_err============
  432. [ 2.048597] ltr_init: ls_fetch_sysconfig_para err.
  433. [ 2.054423] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0
  434. [ 2.061809] i2c /dev entries driver
  435. [ 2.066008] IR RC5(x) protocol handler initialized
  436. [ 2.071438] sunxi cedar version 0.1
  437. [ 2.075428] [cedar]: install start!!!
  438. [ 2.079645] [cedar]: install end!!!
  439. [ 2.083818] sunxi_i2c_do_xfer()980 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x18)
  440. [ 2.093168] sunxi_i2c_do_xfer()980 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x19)
  441. [ 2.102499] sunxi_i2c_do_xfer()980 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x1a)
  442. [ 2.111831] sunxi_i2c_do_xfer()980 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x29)
  443. [ 2.121162] sunxi_i2c_do_xfer()980 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x2a)
  444. [ 2.130494] sunxi_i2c_do_xfer()980 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x2b)
  445. [ 2.139813] sunxi_i2c_do_xfer()980 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4c)
  446. [ 2.149144] sunxi_i2c_do_xfer()980 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4d)
  447. [ 2.158493] sunxi_i2c_do_xfer()980 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4e)
  448. [ 2.167852] sunxi_i2c_do_xfer()980 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x18)
  449. [ 2.177210] sunxi_i2c_do_xfer()980 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x19)
  450. [ 2.186586] sunxi_i2c_do_xfer()980 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x1a)
  451. [ 2.195964] sunxi_i2c_do_xfer()980 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x29)
  452. [ 2.205340] sunxi_i2c_do_xfer()980 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x2a)
  453. [ 2.214716] sunxi_i2c_do_xfer()980 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x2b)
  454. [ 2.224093] sunxi_i2c_do_xfer()980 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4c)
  455. [ 2.233470] sunxi_i2c_do_xfer()980 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4d)
  456. [ 2.242854] sunxi_i2c_do_xfer()980 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4e)
  457. [ 2.252061] sunxi_wdt_init_module: sunxi WatchDog Timer Driver v1.0
  458. [ 2.259210] sunxi_wdt_probe: devm_ioremap return wdt_reg 0xf1c20ca0, res->start 0x01c20ca0, res->end 0x01c20cbf
  459. [ 2.270259] scsi0 : usb-storage 3-1:1.0
  460. [ 2.270380] sunxi_wdt_probe: initialized (g_timeout=16s, g_nowayout=0)
  461. [ 2.270390] wdt_enable, write reg 0xf1c20cb8 val 0x00000000
  462. [ 2.270399] timeout_to_interv, line 167
  463. [ 2.270406] interv_to_timeout, line 189
  464. [ 2.270413] wdt_set_tmout, write 0x000000b0 to mode reg 0xf1c20cb8, actual timeout 16 sec
  465. [ 2.305979] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  466. [ 2.315709] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.109 2014-12-4 20:51) Compiled in Feb 27 2016 at 16:50:45
  467. [ 2.327127] [mmc]: get mmc0's sdc_power is null!
  468. [ 2.332270] [mmc]: get mmc1's sdc_power is null!
  469. [ 2.337387] [mmc]: get mmc1's 2xmode ok, val = 1
  470. [ 2.342514] [mmc]: get mmc1's ddrmode ok, val = 1
  471. [ 2.347733] [mmc]: get mmc2's IO(sdc_cd) failed
  472. [ 2.352775] [mmc]: get mmc2's sdc_power is null!
  473. [ 2.357892] [mmc]: get mmc2's 2xmode ok, val = 1
  474. [ 2.363036] [mmc]: get mmc2's ddrmode ok, val = 1
  475. [ 2.368253] [mmc]: MMC host used card: 0x7, boot card: 0x1, io_card 2
  476. [ 2.376301] [mmc]: sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  477. [ 2.387162] [mmc]: sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  478. [ 2.397110] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  479. [ 2.398376] [mmc]: sdc0 power_supply is null
  480. [ 2.410034] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  481. [ 2.424931] [mmc]: sdc2 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  482. [ 2.430849] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 52, RTO !!
  483. [ 2.431690] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 52, RTO !!
  484. [ 2.431720] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  485. [ 2.434208] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  486. [ 2.436118] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 8, RTO !!
  487. [ 2.436144] *******************Try sdio*******************
  488. [ 2.436961] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5, RTO !!
  489. [ 2.437793] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5, RTO !!
  490. [ 2.438626] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5, RTO !!
  491. [ 2.439458] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5, RTO !!
  492. [ 2.439483] *******************Try sd *******************
  493. [ 2.440303] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 55, RTO !!
  494. [ 2.441138] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 55, RTO !!
  495. [ 2.441973] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 55, RTO !!
  496. [ 2.442806] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 55, RTO !!
  497. [ 2.442831] *******************Try mmc*******************
  498. [ 2.442843] [mmc]: sdc0 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  499. [ 2.443754] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 1, RTO !!
  500. [ 2.443784] [mmc]: sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  501. [ 2.443893] [mmc]: sdc0 power_supply is null
  502. [ 2.446472] [mmc]: sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  503. [ 2.447999] [mmc]: sdc0 power_supply is null
  504. [ 2.460041] [mmc]: sdc0 set ios: clk 300000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  505. [ 2.481120] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 52, RTO !!
  506. [ 2.482223] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 52, RTO !!
  507. [ 2.482252] [mmc]: sdc0 set ios: clk 300000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  508. [ 2.484868] [mmc]: sdc0 set ios: clk 300000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  509. [ 2.487060] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 8, RTO !!
  510. [ 2.487085] *******************Try sdio*******************
  511. [ 2.488170] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5, RTO !!
  512. [ 2.489270] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5, RTO !!
  513. [ 2.490370] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5, RTO !!
  514. [ 2.491473] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5, RTO !!
  515. [ 2.491499] *******************Try sd *******************
  516. [ 2.492583] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 55, RTO !!
  517. [ 2.493687] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 55, RTO !!
  518. [ 2.494790] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 55, RTO !!
  519. [ 2.495894] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 55, RTO !!
  520. [ 2.495919] *******************Try mmc*******************
  521. [ 2.495929] [mmc]: sdc0 set ios: clk 300000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  522. [ 2.497121] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 1, RTO !!
  523. [ 2.497151] [mmc]: sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  524. [ 2.497257] [mmc]: sdc0 power_supply is null
  525. [ 2.499835] [mmc]: sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  526. [ 2.501364] [mmc]: sdc0 power_supply is null
  527. [ 2.520036] [mmc]: sdc0 set ios: clk 200000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  528. [ 2.541666] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 52, RTO !!
  529. [ 2.543305] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 52, RTO !!
  530. [ 2.543335] [mmc]: sdc0 set ios: clk 200000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  531. [ 2.546217] [mmc]: sdc0 set ios: clk 200000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  532. [ 2.548971] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 8, RTO !!
  533. [ 2.548996] *******************Try sdio*******************
  534. [ 2.550621] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5, RTO !!
  535. [ 2.552261] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5, RTO !!
  536. [ 2.553901] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5, RTO !!
  537. [ 2.555541] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5, RTO !!
  538. [ 2.555566] *******************Try sd *******************
  539. [ 2.557191] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 55, RTO !!
  540. [ 2.558831] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 55, RTO !!
  541. [ 2.560471] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 55, RTO !!
  542. [ 2.562111] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 55, RTO !!
  543. [ 2.562136] *******************Try mmc*******************
  544. [ 2.562147] [mmc]: sdc0 set ios: clk 200000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  545. [ 2.563901] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 1, RTO !!
  546. [ 2.563931] [mmc]: sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  547. [ 2.564036] [mmc]: sdc0 power_supply is null
  548. [ 2.566614] [mmc]: sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  549. [ 2.568142] [mmc]: sdc0 power_supply is null
  550. [ 2.572808] no blue_led, ignore it!
  551. [ 2.573013] Registered led device: red_led
  552. [ 2.573116] Registered led device: green_led
  553. [ 2.573836] usbcore: registered new interface driver usbhid
  554. [ 2.573843] usbhid: USB HID core driver
  555. [ 2.667013] asoc: sndcodec <-> sunxi-codec mapping ok
  556. [ 2.680045] [mmc]: sdc0 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  557. [ 2.859888] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 52, RTO !!
  558. [ 3.028300] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 52, RTO !!
  559. [ 3.036458] [mmc]: sdc0 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  560. [ 3.047988] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
  561. [ 3.054953] oprofile: using arm/armv7-ca7
  562. [ 3.055229] [mmc]: sdc0 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  563. [ 3.069546] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 8, RTO !!
  564. [ 3.077755] u32 classifier
  565. [ 3.080772] Actions configured
  566. [ 3.080810] *******************Try sdio*******************
  567. [ 3.090629] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5, RTO !!
  568. [ 3.098821] IPv4 over IPv4 tunneling driver
  569. [ 3.103477] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5, RTO !!
  570. [ 3.112077] TCP: bic registered
  571. [ 3.115564] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5, RTO !!
  572. [ 3.123641] TCP: cubic registered
  573. [ 3.127316] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5, RTO !!
  574. [ 3.135367] TCP: westwood registered
  575. [ 3.135374] *******************Try sd *******************
  576. [ 3.145328] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 55, RTO !!
  577. [ 3.153471] TCP: highspeed registered
  578. [ 3.157532] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 55, RTO !!
  579. [ 3.165675] TCP: hybla registered
  580. [ 3.169350] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 55, RTO !!
  581. [ 3.177512] TCP: htcp registered
  582. [ 3.181106] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 55, RTO !!
  583. [ 3.189228] TCP: vegas registered
  584. [ 3.189241] *******************Try mmc*******************
  585. [ 3.189254] [mmc]: sdc0 set ios: clk 150000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  586. [ 3.209016] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 1, RTO !!
  587. [ 3.217064] [mmc]: sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  588. [ 3.217074] TCP: veno registered
  589. [ 3.217081] TCP: scalable registered
  590. [ 3.217086] TCP: lp registered
  591. [ 3.217091] TCP: yeah registered
  592. [ 3.217097] TCP: illinois registered
  593. [ 3.217102] Initializing XFRM netlink socket
  594. [ 3.250104] [mmc]: sdc0 power_supply is null
  595. [ 3.254844] NET: Registered protocol family 10
  596. [ 3.260742] NET: Registered protocol family 17
  597. [ 3.265692] NET: Registered protocol family 15
  598. [ 3.270676] Registering the dns_resolver key type
  599. [ 3.276049] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  600. [ 3.284573] ThumbEE CPU extension supported.
  601. [ 3.289318] Registering SWP/SWPB emulation handler
  602. [ 3.295490] cmdline,disp=
  603. [ 3.298419] [HDMI] power vcc-hdmi-18
  604. [ 3.303145] scsi 0:0:0:0: Direct-Access USB TO I DE/SATA Device 0009 PQ: 0 ANSI: 0
  605. [ 3.315334] sd 0:0:0:0: [sda] Test WP failed, assume Write Enabled
  606. [ 3.323212] sd 0:0:0:0: [sda] Asking for cache data failed
  607. [ 3.329297] sd 0:0:0:0: [sda] Assuming drive cache: write through
  608. [ 3.336279] ths_fetch_sysconfig_para: type err device_used = 1.
  609. [ 3.344039] parse cooler0 from sysconfig failed
  610. [ 3.349466] CPU Budget:Register notifier
  611. [ 3.353860] CPU Budget:register Success
  612. [ 3.358129] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0
  613. [ 3.369730] sd 0:0:0:0: [sda] Test WP failed, assume Write Enabled
  614. [ 3.376778] [rf_pm]: select module num is 7
  615. [ 3.381469] [rf_pm]: module power0 name vcc-wifi-33
  616. [ 3.386886] [rf_pm]: failed to fetch module_power1
  617. [ 3.392240] [rf_pm]: mod has no chip_en gpio
  618. [ 3.396987] [rf_pm]: failed to fetch lpo_use_apclk
  619. [ 3.402327] [rf_pm]: regulator on.
  620. [ 3.406377] [wifi_pm]: wifi gpio init is OK !!
  621. [ 3.411374] [rfkill]: init no bt used in configuration
  622. [ 3.411404] sd 0:0:0:0: [sda] Asking for cache data failed
  623. [ 3.411415] sd 0:0:0:0: [sda] Assuming drive cache: write through
  624. [ 3.411427] sd 0:0:0:0: [sda] Attached SCSI disk
  625. [ 3.435028] ALSA device list:
  626. [ 3.438318] #0: audiocodec
  627. [ 3.440056] [mmc]: mmc 2 detect change, present 1
  628. [ 3.446752] #1: sndhdmi
  629. [ 3.450102] VFS: Cannot open root device "mmcblk2p2" or unknown-block(0,0): error -6
  630. [ 3.458699] Please append a correct "root=" boot option; here are the available partitions:
  631. [ 3.467986] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
RAW Paste Data