Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Logging into Xen Virtual machine dev.vm, Press Ctrl-] to Quit. Press a couple of Enters
- to start.
- Bootdata ok (command line is root=/dev/sda1 ro)
- Linux version 2.6.18-308.4.1.el5xen (mockbuild@builder10.centos.org) (gcc version 4.1.2
- 20080704 (Red Hat 4.1.2-52)) #1 SMP Tue Apr 17 17:49:15 EDT 2012
- BIOS-provided physical RAM map:
- Xen: 0000000000000000 - 0000000020800000 (usable)
- No mptable found.
- Built 1 zonelists. Total pages: 129529
- Kernel command line: root=/dev/sda1 ro
- Initializing CPU#0
- PID hash table entries: 2048 (order: 11, 16384 bytes)
- Xen reported: 2666.666 MHz processor.
- Console: colour dummy device 80x25
- Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
- Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
- Software IO TLB disabled
- Memory: 499368k/532480k available (2546k kernel code, 24484k reserved, 1757k data, 196k
- init)
- Calibrating delay using timer specific routine.. 6669.13 BogoMIPS (lpj=13338269)
- Security Framework v1.0.0 initialized
- SELinux: Initializing.
- selinux_register_security: Registering secondary module capability
- Capability LSM initialized as secondary
- Mount-cache hash table entries: 256
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 256K
- CPU: L3 cache: 8192K
- (SMP-)alternatives turned off
- Brought up 1 CPUs
- checking if image is initramfs... it is
- Grant table initialized
- NET: Registered protocol family 16
- Initializing CPU#1
- migration_cost=32
- Initializing CPU#2
- migration_cost=32
- Initializing CPU#3
- migration_cost=32
- migration_cost=Initializing CPU#4
- 32
- migration_cost=Initializing CPU#5
- 32
- migration_cost=Initializing CPU#6
- 32
- Initializing CPU#7
- migration_cost=32
- Brought up 8 CPUs
- PCI: setting up Xen PCI frontend stub
- ACPI: Interpreter disabled.
- Linux Plug and Play Support v0.97 (c) Adam Belay
- pnp: PnP ACPI: disabled
- xen_mem: Initialising balloon driver.
- usbcore: registered new driver usbfs
- usbcore: registered new driver hub
- PCI: System does not support PCI
- PCI: System does not support PCI
- NetLabel: Initializing
- NetLabel: domain hash size = 128
- NetLabel: protocols = UNLABELED CIPSOv4
- NetLabel: unlabeled traffic allowed by default
- NET: Registered protocol family 2
- IP route cache hash table entries: 16384 (order: 5, 131072 bytes)
- TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
- TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
- TCP: Hash tables configured (established 65536 bind 32768)
- TCP reno registered
- audit: initializing netlink socket (disabled)
- type=2000 audit(1338125620.488:1): initialized
- VFS: Disk quotas dquot_6.5.1
- Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- Initializing Cryptographic API
- alg: No test for crc32c (crc32c-generic)
- ksign: Installing public key data
- Loading keyring
- - Added public key 9914D352C271AE64
- - User ID: CentOS (Kernel Module GPG key)
- io scheduler noop registered
- io scheduler anticipatory registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- rtc: IRQ 8 is not free.
- Non-volatile memory driver v1.2
- Linux agpgart interface v0.101 (c) Dave Jones
- brd: module loaded
- Xen virtual console successfully installed as xvc0
- Bootdata ok (command line is root=/dev/sda1 ro)
- Linux version 2.6.18-308.4.1.el5xen (mockbuild@builder10.centos.org) (gcc version 4.1.2
- 20080704 (Red Hat 4.1.2-52)) #1 SMP Tue Apr 17 17:49:15 EDT 2012
- BIOS-provided physical RAM map:
- Xen: 0000000000000000 - 0000000020800000 (usable)
- No mptable found.
- Built 1 zonelists. Total pages: 129529
- Kernel command line: root=/dev/sda1 ro
- Initializing CPU#0
- PID hash table entries: 2048 (order: 11, 16384 bytes)
- Xen reported: 2666.666 MHz processor.
- Console: colour dummy device 80x25
- Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
- Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
- Software IO TLB disabled
- Memory: 499368k/532480k available (2546k kernel code, 24484k reserved, 1757k data, 196k
- init)
- Calibrating delay using timer specific routine.. 6669.13 BogoMIPS (lpj=13338269)
- Security Framework v1.0.0 initialized
- SELinux: Initializing.
- selinux_register_security: Registering secondary module capability
- Capability LSM initialized as secondary
- Mount-cache hash table entries: 256
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 256K
- CPU: L3 cache: 8192K
- (SMP-)alternatives turned off
- Brought up 1 CPUs
- checking if image is initramfs... it is
- Grant table initialized
- NET: Registered protocol family 16
- Initializing CPU#1
- migration_cost=32
- Initializing CPU#2
- migration_cost=32
- Initializing CPU#3
- migration_cost=32
- migration_cost=Initializing CPU#4
- 32
- migration_cost=Initializing CPU#5
- 32
- migration_cost=Initializing CPU#6
- 32
- Initializing CPU#7
- migration_cost=32
- Brought up 8 CPUs
- PCI: setting up Xen PCI frontend stub
- ACPI: Interpreter disabled.
- Linux Plug and Play Support v0.97 (c) Adam Belay
- pnp: PnP ACPI: disabled
- xen_mem: Initialising balloon driver.
- usbcore: registered new driver usbfs
- usbcore: registered new driver hubPCI: System does not support PCI
- NetLabel: Initializing
- NetLabel: domain hash size = 128
- NetLabel: protocols = UNLABELED CIPSOv4
- NetLabel: unlabeled traffic allowed by default
- NET: Registered protocol family 2
- IP route cache hash table entries: 16384 (order: 5, 131072 bytes)
- TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
- TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
- TCP: Hash tables configured (established 65536 bind 32768)
- TCP reno registered
- audit: initializing netlink socket (disabled)
- type=2000 audit(1338125620.488:1): initialized
- VFS: Disk quotas dquot_6.5.1
- Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- Initializing Cryptographic API
- alg: No test for crc32c (crc32c-generic)
- ksign: Installing public key data
- Loading keyring
- - Added public key 9914D352C271AE64
- - User ID: CentOS (Kernel Module GPG key)
- io scheduler noop registered
- io scheduler anticipatory registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- rtc: IRQ 8 is not free.
- Non-volatile memory driver v1.2
- Linux agpgart interface v0.101 (c) Dave Jones
- brd: module loaded
- Xen virtual console successfully installed as xvc0
- Event-channel device installed.
- Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
- ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
- ide-floppy driver 0.99.newide
- usbcore: registered new driver hiddev
- usbcore: registered new driver usbhid
- drivers/usb/input/hid-core.c: v2.6:USB HID core driver
- PNP: No PS/2 controller found. Probing ports directly.
- i8042.c: No controller found.
- mice: PS/2 mouse device common for all mice
- md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
- md: bitmap version 4.39
- TCP bic registered
- Initializing IPsec netlink socket
- NET: Registered protocol family 1
- NET: Registered protocol family 17
- XENBUS: Device with no driver: dev
- XENBUS: Device with no driver: device/vbd/2050
- XENBUS: Device with no driver: device/vif/0
- Initalizing network drop monitor service
- Write protecting the kernel read-only data: 504k
- Red Hat nash version 5.1.19.6 starting
- Mounting proc filesystem
- Mounting sysfs filesystem
- Creating /dev
- Creating initial device nodes
- Setting up hotplug.
- Creating block device nodes.
- Loading xenblk.ko module
- Registering block device major 8
- Loading ehci-hcd.ko module
- Loading ohci-hcd.ko module
- Loading uhci-hcd.ko module
- USB Universal Host Controller Interface driver v3.0
- Loading jbd.ko module
- Loading ext3.ko module
- Loading scsi_mod.ko module
- SCSI subsystem initialized
- Loading sd_mod.ko module
- register_blkdev: cannot get major 8 for sd
- Loading libata.ko module
- Loading dm-mem-cache.ko module
- Loading dm-mod.ko module
- device-mapper: uevent: version 1.0.3
- device-mapper: ioctl: 4.11.6-ioctl (2011-02-18) initialised: dm-devel@redhat.com
- Loading dm-log.ko module
- Loading dm-region_hash.ko module
- Loading dm-message.ko module
- Loading dm-raid45.ko module
- device-mapper: dm-raid45: initialized v0.2594l
- Loading xennet.ko module
- netfront: Initialising virtual ethernet driver.
- netfront: device eth0 has copying receive path.
- Waiting for driver initialization.
- Scanning and configuring dmraid supported devices
- Creating root device.
- Mounting root filesystem.
- kjournald starting. Commit interval 5 seconds
- EXT3-fs: mounted filesystem with ordered data mode.
- Setting up other filesystems.
- Setting up new root fs
- no fstab.sys, mounting internal defaults
- Switching to new root and running init.
- unmounting old /dev
- unmounting old /proc
- unmounting old /sys
- SELinux: Could not open policy file <= /etc/selinux/targeted/policy/policy.24: No suc
- h file or directory
- INIT: version 2.88 booting
- Using makefile-style concurrent boot in runlevel S.
- udev requires a kernel >= 2.6.26, not started. ... failed!
- failed!
- Setting the system clock.
- Cannot access the Hardware Clock via any known method.
- Use the --debug option to see the details of our search for an access method.
- Unable to set System Clock to: Sun May 27 13:34:04 UTC 2012 ... (warning).
- Setting preliminary keymap...done.
- Activating swap...Adding 524280k swap on /dev/sda2. Priority:-1 extents:1 across:52428
- 0k
- done.
- Checking root file system...fsck from util-linux-ng 2.17.2
- /dev/sda1: clean, 25131/393216 files, 199963/786432 blocks
- done.
- EXT3 FS on sda1, internal journal
- Loading kernel modules...done.
- Cleaning up ifupdown....
- Setting the system clock.
- Cannot access the Hardware Clock via any known method.
- Use the --debug option to see the details of our search for a
- Unable to set System Clock to: Sun May 27 13:34:05 UTC 2012 ... (warning).
- Setting up networking....
- Activating lvm and md swap...done.
- Checking file systems...fsck from util-linux-ng 2.17.2
- done.
- Mounting local filesystems...mount: none already mounted or /dev/pts busy
- mount: according to mtab, devpts is already mounted on /dev/pts
- mount: none already mounted or /sys busy
- mount: according to mtab, sysfs is already mounted on /sys
- failed.
- Activating swapfile swap...done.
- Cleaning up temporary files....
- Setting kernel variables ...done.
- Configuring network interfaces...ifup: failed to open statefile /etc/network/run/ifstat
- e: No such file or directory
- failed.
- Cleaning up temporary files....
- Setting console screen modes.
- Skipping font and keymap setup (handled by console-setup).
- Setting up console font and keymap...done.
- startpar: service(s) returned failure: udev ... failed!
- INIT: Entering runlevel: 2
- Using makefile-style concurrent boot in runlevel 2.
- Starting enhanced syslogd: rsyslogd.
- Checking battery state...done.
- Starting ACPI services...RTNETLINK1 answers: No such file or directory
- acpid: error talking to the kernel via netlink
- .
- Starting anac(h)ronistic cron: anacron.
- Starting deferred execution scheduler: atd failed!
- Starting periodic command scheduler: cron.
- NET: Registered protocol family 10
- lo: Disabled Privacy Extensions
- IPv6 over IPv4 tunneling driver
- sit0: Disabled Privacy Extensions
- Starting OpenBSD Secure Shell server: sshd.
- Starting MTA: exim4.
- ALERT: exim paniclog /var/log/exim4/paniclog has non-zero size, mail system possibly br
- oken ... failed!
- Starting acpi_fakekey daemon...done.
- INIT: Id "hvc0" respawning too fast: disabled for 5 minutes
Add Comment
Please, Sign In to add comment