Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- 3: System Boot system code via Flash.
- ## Checking image at bc600000 ...
- Image Name: MIPS NATCAP Linux-4.14.50
- Image Type: MIPS Linux Kernel Image (lzma compressed)
- Data Size: 1677380 Bytes = 1.6 MB
- Load Address: 80000000
- Entry Point: 80000000
- .......................... Verifying Checksum ... OK
- Uncompressing Kernel Image ... OK
- No initrd
- ## Transferring control to Linux (at address 80000000) ...
- ## Giving linux memsize in MB, 128
- Starting kernel ...
- [ 0.000000] Linux version 4.14.50 (ptpt52@SC-GAME) (gcc version 7.3.0 (OpenWr t GCC 7.3.0 r6813-189ab0dfac)) #0 Mon Jun 25 15:12:35 2018
- [ 0.000000] Board has DDR2
- [ 0.000000] Analog PMU set to hw control
- [ 0.000000] Digital PMU set to hw control
- [ 0.000000] SoC Type: MediaTek MT7620A ver:2 eco:6
- [ 0.000000] bootconsole [early0] enabled
- [ 0.000000] CPU0 revision is: 00019650 (MIPS 24KEc)
- [ 0.000000] MIPS: machine is Xiaomi Mi Router R3
- [ 0.000000] Determined physical RAM map:
- [ 0.000000] memory: 08000000 @ 00000000 (usable)
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
- [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 byt es
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
- [ 0.000000] random: get_random_bytes called from start_kernel+0x8c/0x474 with crng_init=0
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512
- [ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jff s2
- [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
- [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.000000] Writing ErrCtl register=00040ce1
- [ 0.000000] Readback ErrCtl register=00040ce1
- [ 0.000000] Memory: 124432K/131072K available (3915K kernel code, 172K rwdata , 884K rodata, 204K init, 221K bss, 6640K reserved, 0K cma-reserved)
- [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] NR_IRQS: 256
- [ 0.000000] CPU Clock: 580MHz
- [ 0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_n s: 583261500 ns
- [ 0.000000] systick: enable autosleep mode
- [ 0.000000] systick: running - mult: 214748, shift: 32
- [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_i dle_ns: 6590553264 ns
- [ 0.000011] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 74051 15902ns
- [ 0.007586] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
- [ 0.073560] pid_max: default: 32768 minimum: 301
- [ 0.078264] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.084642] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.093693] devtmpfs: initialized
- [ 0.101070] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 19112604462750000 ns
- [ 0.110611] futex hash table entries: 256 (order: -1, 3072 bytes)
- [ 0.116589] pinctrl core: initialized pinctrl subsystem
- [ 0.122208] NET: Registered protocol family 16
- [ 0.388039] PCI host bridge /pcie@10140000 ranges:
- [ 0.392654] MEM 0x0000000020000000..0x000000002fffffff
- [ 0.397703] IO 0x0000000010160000..0x000000001016ffff
- [ 0.418470] rt2880_gpio 10000600.gpio: registering 24 gpios
- [ 0.423927] rt2880_gpio 10000600.gpio: registering 24 irq handlers
- [ 0.430371] rt2880_gpio 10000638.gpio: registering 16 gpios
- [ 0.435803] rt2880_gpio 10000638.gpio: registering 16 irq handlers
- [ 0.443304] PCI host bridge to bus 0000:00
- [ 0.447294] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
- [ 0.453910] pci_bus 0000:00: root bus resource [io 0xffffffff]
- [ 0.459670] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
- [ 0.466251] pci_bus 0000:00: No busn resource found for root bus, will use [b us 00-ff]
- [ 0.475134] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
- [ 0.481497] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
- [ 0.488307] pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff]
- [ 0.494853] pci 0000:00:00.0: BAR 9: assigned [mem 0x20100000-0x201fffff pref ]
- [ 0.501883] pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff]
- [ 0.508470] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bi t]
- [ 0.515590] pci 0000:01:00.0: BAR 6: assigned [mem 0x20100000-0x2010ffff pref ]
- [ 0.522576] pci 0000:00:00.0: PCI bridge to [bus 01]
- [ 0.527407] pci 0000:00:00.0: bridge window [mem 0x20000000-0x200fffff]
- [ 0.533986] pci 0000:00:00.0: bridge window [mem 0x20100000-0x201fffff pref ]
- [ 0.544487] clocksource: Switched to clocksource systick
- [ 0.553268] NET: Registered protocol family 2
- [ 0.558367] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.565154] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.571277] TCP: Hash tables configured (established 1024 bind 1024)
- [ 0.577622] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.583248] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.589640] NET: Registered protocol family 1
- [ 0.595881] rt-timer 10000100.timer: maximum frequency is 1220Hz
- [ 0.602478] Crashlog allocated RAM at address 0x3f00000
- [ 0.609267] workingset: timestamp_bits=30 max_order=15 bucket_order=0
- [ 0.621099] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.626752] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORIT Y) (c) 2001-2006 Red Hat, Inc.
- [ 0.646173] io scheduler noop registered
- [ 0.649919] io scheduler deadline registered (default)
- [ 0.656997] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- [ 0.665445] console [ttyS0] disabled
- [ 0.668894] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103
- [ 0.678582] console [ttyS0] enabled
- [ 0.678582] console [ttyS0] enabled
- [ 0.685610] bootconsole [early0] disabled
- [ 0.685610] bootconsole [early0] disabled
- [ 0.695167] cacheinfo: Failed to find cpu0 device node
- [ 0.700419] cacheinfo: Unable to detect cache hierarchy for CPU 0
- [ 0.707065] !!! nand page size = 2048, addr len=4
- [ 0.712869] mtk_nand_probe: alloc 13a8, at 87ddc000 , btt(87ddd0c0, 100), ran fc_mtd:87ddd1c0
- [ 0.721922] 10 fixed-partitions partitions found on MTD device ra_nfc
- [ 0.728550] Creating 10 MTD partitions on "ra_nfc":
- [ 0.733535] 0x000000000000-0x000000040000 : "Bootloader"
- [ 0.740592] 0x000000040000-0x000000080000 : "Config"
- [ 0.747920] 0x000000080000-0x0000000c0000 : "Bdata"
- [ 0.755068] 0x0000000c0000-0x000000100000 : "Factory"
- [ 0.762294] 0x000000100000-0x000000140000 : "crash"
- [ 0.769482] 0x000000140000-0x000000180000 : "crash_syslog"
- [ 0.777310] 0x000000180000-0x000000200000 : "reserved0"
- [ 0.784925] 0x000000200000-0x000000600000 : "kernel0_rsvd"
- [ 0.793934] 0x000000600000-0x000000a00000 : "kernel"
- [ 0.802452] 0x000000a00000-0x000008000000 : "ubi"
- [ 0.836786] _nfc_read_raw_data: fail
- [ 0.840518] nfc_read_oob: fail
- [ 0.843630] nand_block_checkbad: offs:6000000 tag: BAD
- [ 0.862526] libphy: Fixed MDIO Bus: probed
- [ 0.871041] gsw: setting port4 to ephy mode
- [ 0.875401] mtk_soc_eth 10100000.ethernet eth0 (uninitialized): port 0 link u p (100Mbps/Full duplex)
- [ 0.885223] mtk_soc_eth 10100000.ethernet: loaded mt7620 driver
- [ 0.891946] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0 100000, irq 5
- [ 0.901963] rt2880_wdt 100x474 with crng_init=0
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512
- [ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jff s2
- [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
- [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.000000] Writing ErrCtl register=00040ce1
- [ 0.000000] Readback ErrCtl register=00040ce1
- [ 0.000000] Memory: 124432K/131072K available (3915K kernel code, 172K rwdata , 884K rodata, 204K init, 221K bss, 6640K reserved, 0K cma-reserved)
- [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] NR_IRQS: 256
- [ 0.000000] CPU Clock: 580MHz
- [ 0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_n s: 583261500 ns
- [ 0.000000] systick: enable autosleep mode
- [ 0.000000] systick: running - mult: 214748, shift: 32
- [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_i dle_ns: 6590553264 ns
- [ 0.000011] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 74051 15902ns
- [ 0.007585] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
- [ 0.073557] pid_max: default: 32768 minimum: 301
- [ 0.078261] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.084640] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.093690] devtmpfs: initialized
- [ 0.101067] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 19112604462750000 ns
- [ 0.110608] futex hash table entries: 256 (order: -1, 3072 bytes)
- [ 0.116587] pinctrl core: initialized pinctrl subsystem
- [ 0.122206] NET: Registered protocol family 16
- [ 0.388036] PCI host bridge /pcie@10140000 ranges:
- [ 0.392651] MEM 0x0000000020000000..0x000000002fffffff
- [ 0.397700] IO 0x0000000010160000..0x000000001016ffff
- [ 0.418467] rt2880_gpio 10000600.gpio: registering 24 gpios
- [ 0.423924] rt2880_gpio 10000600.gpio: registering 24 irq handlers
- [ 0.430368] rt2880_gpio 10000638.gpio: registering 16 gpios
- [ 0.435801] rt2880_gpio 10000638.gpio: registering 16 irq handlers
- [ 0.443303] PCI host bridge to bus 0000:00
- [ 0.447294] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
- [ 0.453909] pci_bus 0000:00: root bus resource [io 0xffffffff]
- [ 0.459669] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
- [ 0.466251] pci_bus 0000:00: No busn resource found for root bus, will use [b us 00-ff]
- [ 0.475131] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
- [ 0.481495] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
- [ 0.488305] pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff]
- [ 0.494851] pci 0000:00:00.0: BAR 9: assigned [mem 0x20100000-0x201fffff pref ]
- [ 0.501880] pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff]
- [ 0.508468] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bi t]
- [ 0.515588] pci 0000:01:00.0: BAR 6: assigned [mem 0x20100000-0x2010ffff pref ]
- [ 0.522574] pci 0000:00:00.0: PCI bridge to [bus 01]
- [ 0.527405] pci 0000:00:00.0: bridge window [mem 0x20000000-0x200fffff]
- [ 0.533984] pci 0000:00:00.0: bridge window [mem 0x20100000-0x201fffff pref ]
- [ 0.544485] clocksource: Switched to clocksource systick
- [ 0.553267] NET: Registered protocol family 2
- [ 0.558365] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.565152] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.571274] TCP: Hash tables configured (established 1024 bind 1024)
- [ 0.577619] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.583245] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.589638] NET: Registered protocol family 1
- [ 0.595878] rt-timer 10000100.timer: maximum frequency is 1220Hz
- [ 0.602475] Crashlog allocated RAM at address 0x3f00000
- [ 0.609264] workingset: timestamp_bits=30 max_order=15 bucket_order=0
- [ 0.621096] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.626749] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORIT Y) (c) 2001-2006 Red Hat, Inc.
- [ 0.646171] io scheduler noop registered
- [ 0.649917] io scheduler deadline registered (default)
- [ 0.656994] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- [ 0.665442] console [ttyS0] disabled
- [ 0.668891] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103
- [ 0.678580] console [ttyS0] enabled
- [ 0.678580] console [ttyS0] enabled
- [ 0.685607] bootconsole [early0] disabled
- [ 0.685607] bootconsole [early0] disabled
- [ 0.695163] cacheinfo: Failed to find cpu0 device node
- [ 0.700417] cacheinfo: Unable to detect cache hierarchy for CPU 0
- [ 0.707063] !!! nand page size = 2048, addr len=4
- [ 0.712866] mtk_nand_probe: alloc 13a8, at 87ddc000 , btt(87ddd0c0, 100), ran fc_mtd:87ddd1c0
- [ 0.721920] 10 fixed-partitions partitions found on MTD device ra_nfc
- [ 0.728549] Creating 10 MTD partitions on "ra_nfc":
- [ 0.733534] 0x000000000000-0x000000040000 : "Bootloader"
- [ 0.740590] 0x000000040000-0x000000080000 : "Config"
- [ 0.747918] 0x000000080000-0x0000000c0000 : "Bdata"
- [ 0.755068] 0x0000000c0000-0x000000100000 : "Factory"
- [ 0.762296] 0x000000100000-0x000000140000 : "crash"
- [ 0.769485] 0x000000140000-0x000000180000 : "crash_syslog"
- [ 0.777313] 0x000000180000-0x000000200000 : "reserved0"
- [ 0.784927] 0x000000200000-0x000000600000 : "kernel0_rsvd"
- [ 0.793934] 0x000000600000-0x000000a00000 : "kernel"
- [ 0.802452] 0x000000a00000-0x000008000000 : "ubi"
- [ 0.836783] _nfc_read_raw_data: fail
- [ 0.840515] nfc_read_oob: fail
- [ 0.843627] nand_block_checkbad: offs:6000000 tag: BAD
- [ 0.862523] libphy: Fixed MDIO Bus: probed
- [ 0.871036] gsw: setting port4 to ephy mode
- [ 0.875396] mtk_soc_eth 10100000.ethernet eth0 (uninitialized): port 0 link u p (100Mbps/Full duplex)
- [ 0.885218] mtk_soc_eth 10100000.ethernet: loaded mt7620 driver
- [ 0.891941] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0 100000, irq 5
- [ 0.901958] rt2880_wdt 10000120.watchdog: Initialized
- [ 0.908541] NET: Registered protocol family 10
- [ 0.916235] Segment Routing with IPv6
- [ 0.920096] NET: Registered protocol family 17
- [ 0.924755] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
- [ 0.937991] 8021q: 802.1Q VLAN Support v1.8
- [ 0.946765] UBI error: no valid UBI magic found inside mtd9
- [ 0.953554] VFS: Cannot open root device "(null)" or unknown-block(0,0): erro r -6
- [ 0.961269] Please append a correct "root=" boot option; here are the availab le partitions:
- [ 0.969811] 1f00 256 mtdblock0
- [ 0.969815] (driver?)
- [ 0.976499] 1f01 256 mtdblock1
- [ 0.976503] (driver?)
- [ 0.983171] 1f02 256 mtdblock2
- [ 0.983175] (driver?)
- [ 0.989856] 1f03 256 mtdblock3
- [ 0.989860] (driver?)
- [ 0.996539] 1f04 256 mtdblock4
- [ 0.996543] (driver?)
- [ 1.003211] 1f05 256 mtdblock5
- [ 1.003215] (driver?)
- [ 1.009895] 1f06 512 mtdblock6
- [ 1.009899] (driver?)
- [ 1.016577] 1f07 4096 mtdblock7
- [ 1.016581] (driver?)
- [ 1.023250] 1f08 4096 mtdblock8
- [ 1.023254] (driver?)
- [ 1.029934] 1f09 120832 mtdblock9
- [ 1.029938] (driver?)
- [ 1.036616] Kernel panic - not syncing: VFS: Unable to mount root fs on unkno wn-block(0,0)
- [ 1.046480] Rebooting in 1 seconds..
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement