Guest User

Untitled

a guest
Jun 30th, 2014
415
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. 6>[ 1.064217] mdss_mdp_probe: MDP HW Base phy_Address=0xfd900000 virt=0xc5dc0000
  2. <6>[ 1.064274] mdss_mdp_probe: MDSS VBIF HW Base phy_Address=0xfd924000 virt=0xc5d5e000
  3. <6>[ 1.065859] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
  4. <7>[ 1.065966] mdss_dsi_get_dt_vreg_data: vreg found. count=2
  5. <7>[ 1.065981] mdss_dsi_get_dt_vreg_data: vddio min=1800000, max=1800000, enable=100000, disable=100, preonsleep=0, postonsleep=20, preoffsleep=0, postoffsleep=0
  6. <7>[ 1.065993] mdss_dsi_get_dt_vreg_data: vdda min=1200000, max=1200000, enable=100000, disable=100, preonsleep=0, postonsleep=0, preoffsleep=0, postoffsleep=0
  7. <7>[ 1.066001] mdss_dsi_get_panel_cfg:334: cfg:[0:qcom,dsi_jdi_1440p_video_0:1:qcom,dsi_jdi_1440p_video_1]
  8. <3>[ 1.066007] mdss_dsi_find_panel_of_node 1023 ctrl id=0
  9. <3>[ 1.066053] mdss_dsi_find_panel_of_node 1024 ctrl id stream=0:
  10. <3>[ 1.066098] mdss_dsi_find_panel_of_node 1036 YXQ pan=:1:qcom,dsi_jdi_1440p_video_1
  11. <3>[ 1.066146] mdss_dsi_find_panel_of_node 1037 stream=qcom,dsi_jdi_1440p_video_0:1:qcom,dsi_jdi_1440p_video_1
  12. <7>[ 1.066232] mdss_dsi_find_panel_of_node:1047:0:qcom,dsi_jdi_1440p_video_0:1:qcom,dsi_jdi_1440p_video_1:qcom,dsi_jdi_1440p_video_0
  13. <6>[ 1.066250] mdss_dsi_panel_init: Panel Name = jdi 1440p video mode dsi panel1
  14. <6>[ 1.066335] mdss_dsi_panel_init: Panel Manufacture = JDI
  15. <6>[ 1.066381] mdss_dsi_panel_init: Panel Version = R63319
  16. <6>[ 1.066939] mdss_dsi_panel_init:1681 Continuous splash flag enabled.
  17. <6>[ 1.066988] mdss_dsi_panel_init:1693 Partial update disabled.
  18. <3>[ 1.067315] config gpio 46 LCD -5v
  19. <3>[ 1.067372] dsi_panel_device_register: te_gpio=0
  20. <6>[ 1.067473] mdss_dsi_retrieve_ctrl_resources: dsi base=c5d74800 size=600
  21. <7>[ 1.067885] dsi_panel_device_register: pclk=148192440, bclk=111144330
  22. <7>[ 1.067891] mdss_dsi_panel_power_on: enable=1
  23. <6>[ 1.090202] mdss_register_panel: adding framebuffer device fd922800.qcom,mdss_dsi
  24. <6>[ 1.090485] mdss_hw_init: MDP Rev=10020001
  25. <7>[ 1.091717] dsi_panel_device_register: Panel data initialized
  26. <7>[ 1.091722] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized
  27. <6>[ 1.091744] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
  28. <7>[ 1.091845] mdss_dsi_get_dt_vreg_data: vreg found. count=2
  29. <7>[ 1.091858] mdss_dsi_get_dt_vreg_data: vddio min=1800000, max=1800000, enable=100000, disable=100, preonsleep=0, postonsleep=20, preoffsleep=0, postoffsleep=0
  30. <7>[ 1.091870] mdss_dsi_get_dt_vreg_data: vdda min=1200000, max=1200000, enable=100000, disable=100, preonsleep=0, postonsleep=0, preoffsleep=0, postoffsleep=0
  31. <7>[ 1.091877] mdss_dsi_get_panel_cfg:334: cfg:[0:qcom,dsi_jdi_1440p_video_0:1:qcom,dsi_jdi_1440p_video_1]
  32. <3>[ 1.091882] mdss_dsi_find_panel_of_node 1023 ctrl id=1
  33. <3>[ 1.091930] mdss_dsi_find_panel_of_node 1024 ctrl id stream=0:
  34. <3>[ 1.092016] mdss_dsi_find_panel_of_node 1036 YXQ pan=(null)
  35. <3>[ 1.092063] mdss_dsi_find_panel_of_node 1037 stream=qcom,dsi_jdi_1440p_video_1
  36. <7>[ 1.092149] mdss_dsi_find_panel_of_node:1047:0:qcom,dsi_jdi_1440p_video_0:1:qcom,dsi_jdi_1440p_video_1:qcom,dsi_jdi_1440p_video_1
  37. <6>[ 1.092161] mdss_dsi_panel_init: Panel Name = jdi 1440p video mode dsi panel2
  38. <6>[ 1.092208] mdss_dsi_panel_init: Panel Manufacture = JDI
  39. <6>[ 1.092292] mdss_dsi_panel_init: Panel Version = R63319
  40. <4>[ 1.092342] ------------[ cut here ]------------
  41. <4>[ 1.092437] WARNING: at ../../../../../../kernel/oppo/find7_stock/fs/proc/generic.c:586 proc_register+0x14c/0x1ac()
  42. <4>[ 1.092523] proc_dir_entry 'devinfo/lcd' already registered
  43. <4>[ 1.092567] Modules linked in:
  44. <4>[ 1.092673] [<c010c0a0>] (unwind_backtrace+0x0/0x11c) from [<c0192734>] (warn_slowpath_common+0x4c/0x64)
  45. <4>[ 1.092762] [<c0192734>] (warn_slowpath_common+0x4c/0x64) from [<c01927cc>] (warn_slowpath_fmt+0x2c/0x3c)
  46. <4>[ 1.092853] [<c01927cc>] (warn_slowpath_fmt+0x2c/0x3c) from [<c029fa60>] (proc_register+0x14c/0x1ac)
  47. <4>[ 1.092943] [<c029fa60>] (proc_register+0x14c/0x1ac) from [<c029fd80>] (create_proc_entry+0x70/0x8c)
  48. <4>[ 1.093038] [<c029fd80>] (create_proc_entry+0x70/0x8c) from [<c018dee0>] (register_device_proc+0x84/0xd4)
  49. <4>[ 1.093095] [<c018dee0>] (register_device_proc+0x84/0xd4) from [<c03e3924>] (mdss_dsi_panel_init+0x154/0x1714)
  50. <4>[ 1.093192] [<c03e3924>] (mdss_dsi_panel_init+0x154/0x1714) from [<c08dea98>] (mdss_dsi_ctrl_probe+0x77c/0x8fc)
  51. <4>[ 1.093288] [<c08dea98>] (mdss_dsi_ctrl_probe+0x77c/0x8fc) from [<c0474b2c>] (platform_drv_probe+0x14/0x18)
  52. <4>[ 1.093378] [<c0474b2c>] (platform_drv_probe+0x14/0x18) from [<c047385c>] (driver_probe_device+0x134/0x334)
  53. <4>[ 1.093471] [<c047385c>] (driver_probe_device+0x134/0x334) from [<c0473ac4>] (__driver_attach+0x68/0x8c)
  54. <4>[ 1.093561] [<c0473ac4>] (__driver_attach+0x68/0x8c) from [<c0471dcc>] (bus_for_each_dev+0x48/0x80)
  55. <4>[ 1.093651] [<c0471dcc>] (bus_for_each_dev+0x48/0x80) from [<c0472e58>] (bus_add_driver+0x100/0x26c)
  56. <4>[ 1.093702] [<c0472e58>] (bus_add_driver+0x100/0x26c) from [<c0473f9c>] (driver_register+0x9c/0x120)
  57. <4>[ 1.093796] [<c0473f9c>] (driver_register+0x9c/0x120) from [<c0f1e6b8>] (mdss_dsi_driver_init+0xc/0x2c)
  58. <4>[ 1.093887] [<c0f1e6b8>] (mdss_dsi_driver_init+0xc/0x2c) from [<c0100644>] (do_one_initcall+0x90/0x160)
  59. <4>[ 1.093978] [<c0100644>] (do_one_initcall+0x90/0x160) from [<c0f00b38>] (kernel_init+0xec/0x1a8)
  60. <4>[ 1.094071] [<c0f00b38>] (kernel_init+0xec/0x1a8) from [<c0106c24>] (kernel_thread_exit+0x0/0x8)
  61. <4>[ 1.094137] ---[ end trace 0da3e76b87a358c1 ]---
  62. <4>[ 1.094212] LED trigger bkl-trigger failed to register (-17)
  63. <6>[ 1.094389] mdss_dsi_panel_init:1681 Continuous splash flag enabled.
  64. <6>[ 1.094479] mdss_dsi_panel_init:1693 Partial update disabled.
  65. <6>[ 1.094734] mdss_dsi_retrieve_ctrl_resources: dsi base=c5d7ce00 size=600
  66. <7>[ 1.095051] dsi_panel_device_register: pclk=148192440, bclk=111144330
  67. <7>[ 1.095056] mdss_dsi_panel_power_on: enable=1
  68. <7>[ 1.121601] dsi_panel_device_register: Panel data initialized
  69. <7>[ 1.121607] mdss_dsi_ctrl_probe: Dsi Ctrl->1 initialized
  70. <6>[ 1.124978] mdss_register_panel: adding framebuffer device qcom,mdss_wb_panel.7
  71. <6>[ 1.125691] mdss_fb_parse_dt_split: split framebuffer left=720 right=720
  72. <6>[ 1.125741] mdss_fb_alloc_fbmem_iommu: mdss_fb_alloc_fbmem_iommu frame buffer reserve_size=0x2a30000
  73. <6>[ 1.126328] mdss_fb_alloc_fbmem_iommu: allocating 44236800 bytes at c7000000 (bd400000 phys) for fb 0
  74. <6>[ 1.126494] mdss_fb_register: FrameBuffer[0] 1440x2560 size=44236800 registered successfully!
  75. <7>[ 1.126611] mdss_dsi_event_handler+:event=1
  76. <7>[ 1.126616] mdss_dsi_event_handler: unhandled event=1
  77. <7>[ 1.126621] mdss_dsi_event_handler-:event=1, rc=0
  78. <7>[ 1.126625] mdss_dsi_event_handler+:event=1
  79. <7>[ 1.126629] mdss_dsi_event_handler: unhandled event=1
  80. <7>[ 1.126634] mdss_dsi_event_handler-:event=1, rc=0
  81. <4>[ 1.126691] mdss_mdp_smp_handoff: SMP MMB 3 assigned to a pipe not marked for handoff (client id 17)
  82. <4>[ 1.126780] mdss_mdp_smp_handoff: SMP MMB 4 assigned to a pipe not marked for handoff (client id 17)
  83. <7>[ 1.126934] Registered led device: lcd-backlight
  84. <7>[ 1.126996] mdss_dsi_event_handler+:event=13
  85. <7>[ 1.127000] mdss_dsi_event_handler: unhandled event=13
  86. <7>[ 1.127005] mdss_dsi_event_handler-:event=13, rc=0
  87. <6>[ 1.127100] mdss_fb_register: FrameBuffer[1] 1920x1080 size=0 registered successfully!
  88. <3>[ 1.147880] sps: BAM device 0xf9944000 is not registered yet.
  89. <6>[ 1.147980] sps:BAM 0xf9944000 is registered.
  90. <6>[ 1.148029] msm_serial_hs: BAM device registered. bam_handle=0x0
  91. <6>[ 1.150065] f995d000.uart: ttyHS0 at MMIO 0xf995d000 (irq = 145) is a MSM HS UART
  92. <6>[ 1.152159] msm_serial_hs module loaded
  93. <6>[ 1.152370] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
  94. <6>[ 1.152549] f991e000.serial: ttyHSL0 at MMIO 0xf991e000 (irq = 140) is a MSM
  95. <6>[ 1.154137] msm_hsl_console_setup: console setup on port #0
  96. <6>[ 3.459633] console [ttyHSL0] enabled
  97. <6>[ 3.463387] msm_serial_hsl_init: driver initialized
  98. <6>[ 3.470411] diagchar initialized now
  99. <6>[ 3.475059] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
  100. <6>[ 3.486156] brd: module loaded
  101. <6>[ 3.490061] loop: module loaded
  102. <3>[ 3.492676] isa1200 0-0048: isa1200_probe: gpio is not used/Invalid -22
  103. <3>[ 3.502430] qup_i2c f9967000.i2c: QUP: I2C status flags :0x81321d0, irq:137
  104. <3>[ 3.508498] isa1200 0-0048: isa1200_write_reg: err -135471568
  105. <3>[ 3.514137] isa1200_setup: i2c write failure
  106. <3>[ 3.518371] isa1200 0-0048: isa1200_probe: setup fail -135471568
  107. <4>[ 3.524894] isa1200: probe of 0-0048 failed with error -135471568
  108. <4>[ 3.530483] i2c-core: driver [isa1200] using legacy suspend method
  109. <4>[ 3.536635] i2c-core: driver [isa1200] using legacy resume method
  110. <4>[ 3.543095] QSEECOM: qseecom_probe: support_bus_scaling=0x1
  111. <4>[ 3.548059] QSEECOM: qseecom_probe: bam_pipe_pair=0x2
  112. <4>[ 3.553110] QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
  113. <4>[ 3.558726] QSEECOM: qseecom_probe: hlos-ce-hw-instance=0x1
  114. <4>[ 3.564254] QSEECOM: qseecom_probe: secure app region addr=0x7b00000 size=0x500000
  115. <6>[ 3.572405] SN3193 13097 forbiden shineld driver init
  116. <4>[ 3.577097] i2c-core: driver [tabla-i2c-core] using legacy suspend method
  117. <4>[ 3.583755] i2c-core: driver [tabla-i2c-core] using legacy resume method
  118. <4>[ 3.590539] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
  119. <4>[ 3.597400] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
  120. <6>[ 3.604297] Loading pn544 driver
  121. <6>[ 3.607526] pn544_probe : requesting IRQ 345
  122. <6>[ 3.629979] SCSI Media Changer driver v0.25
  123. <6>[ 3.633890] sps:BAM 0xf9944000 (va:0xc5da0000) enabled: ver:0x13, number of pipes:24
  124. <6>[ 3.641302] spi_qsd f9966000.spi: master is unqueued, this is deprecated
  125. <6>[ 3.651310] spi_qsd f9965000.spi: master is unqueued, this is deprecated
  126. <6>[ 3.660988] tun: Universal TUN/TAP device driver, 1.6
  127. <6>[ 3.665036] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  128. <6>[ 3.671363] rmnet_init: BAM devices[9]
  129. <6>[ 3.678704] PPP generic driver version 2.4.2
  130. <6>[ 3.682105] PPP BSD Compression module registered
  131. <6>[ 3.686713] PPP Deflate Compression module registered
  132. <6>[ 3.692118] PPP MPPE Compression module registered
  133. <6>[ 3.696507] NET: Registered protocol family 24
  134. <6>[ 3.700987] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  135. <6>[ 3.710629] CSLIP: code copyright 1989 Regents of the University of California.
  136. <6>[ 3.718099] wcnss_wlan probed in built-in mode
  137. <6>[ 3.722908] usbcore: registered new interface driver asix
  138. <6>[ 3.727714] usbcore: registered new interface driver cdc_ether
  139. <6>[ 3.733494] usbcore: registered new interface driver net1080
  140. <6>[ 3.739153] usbcore: registered new interface driver cdc_subset
  141. <6>[ 3.745082] usbcore: registered new interface driver zaurus
  142. <6>[ 3.750687] usbcore: registered new interface driver cdc_ncm
  143. <6>[ 4.004585] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  144. <6>[ 4.011096] usbcore: registered new interface driver cdc_acm
  145. <6>[ 4.015821] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  146. <6>[ 4.023795] Initializing USB Mass Storage driver...
  147. <6>[ 4.028635] usbcore: registered new interface driver usb-storage
  148. <6>[ 4.034680] USB Mass Storage support registered.
  149. <6>[ 4.039212] usbcore: registered new interface driver ums-alauda
  150. <6>[ 4.045168] usbcore: registered new interface driver ums-cypress
  151. <6>[ 4.051157] usbcore: registered new interface driver ums-datafab
  152. <6>[ 4.057133] usbcore: registered new interface driver ums_eneub6250
  153. <6>[ 4.063275] usbcore: registered new interface driver ums-freecom
  154. <6>[ 4.069319] usbcore: registered new interface driver ums-isd200
  155. <6>[ 4.075202] usbcore: registered new interface driver ums-jumpshot
  156. <6>[ 4.081246] usbcore: registered new interface driver ums-karma
  157. <6>[ 4.087134] usbcore: registered new interface driver ums-onetouch
  158. <6>[ 4.093142] usbcore: registered new interface driver ums-sddr09
  159. <6>[ 4.099068] usbcore: registered new interface driver ums-sddr55
  160. <6>[ 4.104977] usbcore: registered new interface driver ums-usbat
  161. <6>[ 4.110799] usbcore: registered new interface driver usb_ehset_test
  162. <6>[ 4.117433] mbim_init: initialize 1 instances
  163. <6>[ 4.121447] mbim_init: Initialized 1 ports
  164. <6>[ 4.126350] rndis_qc_init: initialize rndis QC instance
  165. <6>[ 4.130857] gadget: Mass Storage Function, version: 2009/09/11
  166. <6>[ 4.136537] gadget: Number of LUNs=1
  167. <6>[ 4.140207] lun0: LUN: read only CD-ROM file: (no medium)
  168. <6>[ 4.145817] gadget: android_usb ready
  169. <6>[ 4.150528] mousedev: PS/2 mouse device common for all mice
  170. <6>[ 4.155370] usbcore: registered new interface driver xpad
  171. <4>[ 4.160634] 8941_l22: Failed to create debugfs directory
  172. <4>[ 4.166034] 8941_s3: Failed to create debugfs directory
  173. <3>[ 4.679760] [syna] vendor id: 2
  174. <4>[ 4.959160] [syna]maxx=1440,maxy=2712,vkh=142
  175. <6>[ 4.962678] input: synaptics-rmi-ts as /devices/f9924000.i2c/i2c-2/2-0020/input/input0
  176. <4>[ 4.970495] [syna]maxx=1440,maxy=2712,vkh=142
  177. <4>[ 5.718474] [syna]maxx=1440,maxy=2712,vkh=142
  178. <6>[ 5.750440] using rtc device, qpnp_rtc, for alarms
  179. <6>[ 5.754099] qcom,qpnp-rtc qpnp-rtc-f6138000: rtc core: registered qpnp_rtc as rtc0
  180. <6>[ 5.761969] i2c /dev entries driver
  181. <6>[ 5.766609] ocmem: Notifier registered for 1
  182. <7>[ 5.769984] msm_vidc: 1: Failed to read qcom,load-freq-tbl from device tree
  183. <7>[ 5.769991] msm_vidc: 1: no elements in frequency table
  184. <7>[ 5.769996] msm_vidc: 1: Failed to read qcom,reg-presets from device tree
  185. <7>[ 5.770059] msm_vidc: 1: Failed to read qcom,buffer-type-tz-usage-table from device tree
  186. <7>[ 5.770069] msm_vidc: 1: Q6 hfi device probe called
  187. <7>[ 5.770253] msm_vidc: 1: debugfs_create_file: fail
  188. <3>[ 5.772092] msm_cci_probe: pdev f60ea400 device id = -1
  189. <3>[ 5.779560] msm_led_trigger_add_driver:298 It Find7S
  190. <7>[ 5.783606] Registered led device: torch-light
  191. <3>[ 5.783929] msm_led_cci_add_driver:972 It Find7S
  192. <3>[ 6.413554] msm_eeprom_platform_probe line 901
  193. <4>[ 6.498350] [syna]maxx=1440,maxy=2712,vkh=142
  194. <3>[ 6.509075] msm_sensor_power_up:999
  195. <3>[ 6.529864] msm_sensor_power_up exit
  196. <3>[ 6.532653] msm_sensor_power_down:1183
  197. <3>[ 6.552540] msm_sensor_power_down exit
  198. <3>[ 6.555764] msm_sensor_power_up:999
  199. <3>[ 6.581236] msm_sensor_power_up exit
  200. <3>[ 6.583986] msm_sensor_power_down:1183
  201. <3>[ 6.608280] msm_sensor_power_down exit
  202. <3>[ 6.612289] __msm_jpeg_init:946] Jpeg Device id 0
  203. <3>[ 6.615951] __msm_jpeg_init:946] Jpeg Device id 1
  204. <3>[ 6.620634] __msm_jpeg_init:946] Jpeg Device id 2
  205. <6>[ 6.641982] lirc_dev: IR Remote Control driver registered, major 235
  206. <6>[ 6.647591] IR NEC protocol handler initialized
  207. <6>[ 6.652216] IR RC5(x) protocol handler initialized
  208. <6>[ 6.656885] IR RC6 protocol handler initialized
  209. <6>[ 6.661450] IR JVC protocol handler initialized
  210. <6>[ 6.665908] IR Sony protocol handler initialized
  211. <6>[ 6.670564] IR RC5 (streamzap) protocol handler initialized
  212. <6>[ 6.676105] IR SANYO protocol handler initialized
  213. <6>[ 6.680769] IR MCE Keyboard/mouse protocol handler initialized
  214. <6>[ 6.686646] IR LIRC bridge handler initialized
  215. <6>[ 6.691073] usbcore: registered new interface driver uvcvideo
  216. <6>[ 6.696761] USB Video Class driver (1.1.1)
  217. <6>[ 6.701313] bq27541_battery_probe
  218. <4>[ 6.704449] i2c-core: driver [bq27541-battery] using legacy suspend method
  219. <4>[ 6.711136] i2c-core: driver [bq27541-battery] using legacy resume method
  220. <6>[ 6.718038] spmi qpnp-charger-f6137a00: Driver qcom,qpnp-charger requests probe deferral
  221. <4>[ 6.726050] lfc bq24196_probe
  222. <6>[ 6.730534] bq24196 SYS_STS:0x74,fault_reg:0x0
  223. <3>[ 6.735770] pic16F_probe pic16F_probe
  224. <6>[ 6.738463] bq27541_authenticate Enter
  225. <3>[ 6.742319] pic16f_fw_update pic16F_update_fw,erase data ing.......
  226. <6>[ 6.799919] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  227. <6>[ 6.807478] Bluetooth: HCI UART driver ver 2.2
  228. <6>[ 6.811799] Bluetooth: HCIATH3K protocol initialized
  229. <6>[ 6.818098] cpuidle: using governor ladder
  230. <6>[ 6.821540] cpuidle: using governor menu
  231. <6>[ 6.823675] bq27541_authenticate success
  232. <6>[ 6.829069] sdhci: Secure Digital Host Controller Interface driver
  233. <6>[ 6.835194] sdhci: Copyright(c) Pierre Ossman
  234. <6>[ 6.839916] sdhci-pltfm: SDHCI platform and OF driver helper
  235. <6>[ 6.849076] mmc0: no vmmc regulator found
  236. <7>[ 6.853215] Registered led device: mmc0::
  237. <6>[ 6.854335] mmc0: SDHCI controller on msm_sdcc.1 [msm_sdcc.1] using ADMA
  238. <6>[ 6.861960] bq27541_batt_type_detect battery_type:1
  239. <6>[ 6.865920] bq27541-battery 1-0055: DEVICE_TYPE is 0x541, FIRMWARE_VERSION is 0x200
  240. <6>[ 6.873591] bq27541-battery 1-0055: Complete bq27541 configuration 0x601B
  241. <6>[ 6.881937] mmc1: no vmmc regulator found
  242. <7>[ 6.886019] Registered led device: mmc1::
  243. <6>[ 6.887146] mmc1: SDHCI controller on msm_sdcc.2 [msm_sdcc.2] using ADMA
  244. <7>[ 6.893359] Registered led device: rgb_red
  245. <7>[ 6.893471] Registered led device: rgb_green
  246. <7>[ 6.893586] Registered led device: rgb_blue
  247. <3>[ 6.893658] qcom,leds-qpnp leds-qpnp-f6139200: Regulator get failed(-517)
  248. <3>[ 6.899624] qcom,leds-qpnp leds-qpnp-f6139200: Unable to read flash config data
  249. <6>[ 6.906984] spmi leds-qpnp-f6139200: Driver qcom,leds-qpnp requests probe deferral
  250. <7>[ 6.914691] Registered led device: button-backlight
  251. <7>[ 6.915006] Registered led device: kpdbl-lut-2
  252. <7>[ 6.915164] Registered led device: kpdbl-pwm-3
  253. <7>[ 6.915320] Registered led device: kpdbl-pwm-4
  254. <4>[ 6.915618] QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x1
  255. <4>[ 6.920481] QCE50: __qce_get_device_tree_data: ce_phy_reg_base=0xfd440000
  256. <4>[ 6.927450] QCE50: __qce_get_device_tree_data: ce_virt_reg_base=0xc6140000
  257. <4>[ 6.934451] QCE50: __qce_get_device_tree_data: ce_bam_phy_reg_base=0xfd444000
  258. <4>[ 6.941605] QCE50: __qce_get_device_tree_data: CRYPTO BAM IRQ = 268.
  259. <6>[ 6.948267] qce qcedev.0: Qualcomm Crypto 5.1.0 device found @0xfd440000
  260. <6>[ 6.954757] qce qcedev.0: IO base, CE = 0xc6140000
  261. <6>[ 6.954760] , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
  262. <6>[ 6.954762] IO base BAM = 0x0
  263. <6>[ 6.954764] BAM IRQ 268
  264. <6>[ 6.970636] sps:BAM 0xfd444000 is registered.
  265. <6>[ 6.974827] sps:BAM 0xfd444000 (va:0xc5df0000) enabled: ver:0x20, number of pipes:8
  266. <6>[ 6.982781] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x00000000fd444000 irq 268
  267. <6>[ 6.990727] usbcore: registered new interface driver usbhid
  268. <6>[ 6.993194] mmc0: BKOPS_EN bit = 0
  269. <6>[ 6.999120] usbhid: USB HID core driver
  270. <6>[ 7.003310] ashmem: initialized
  271. <6>[ 7.006092] logger: created 256K log 'log_main'
  272. <6>[ 7.010621] logger: created 256K log 'log_events'
  273. <6>[ 7.011379] mmc0: new HS400 MMC card at address 0001
  274. <6>[ 7.020277] mmcblk0: mmc0:0001 032GE4 29.1 GiB
  275. <6>[ 7.020294] logger: created 256K log 'log_radio'
  276. <6>[ 7.020341] logger: created 256K log 'log_system'
  277. <6>[ 7.034179] sps:BAM 0xf9304000 is registered.
  278. <6>[ 7.038225] mmcblk0rpmb: mmc0:0001 032GE4 partition 3 4.00 MiB
  279. <6>[ 7.038242] sps:BAM 0xf9a44000 is registered.
  280. <3>[ 7.038249] usb_bam_ipa_create_resources: Failed to create USB_PROD resource
  281. <6>[ 7.038547] PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'warm' boot
  282. <6>[ 7.038704] input: qpnp_pon as /devices/virtual/input/input1
  283. <3>[ 7.068560] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1300c8, irq:127
  284. <3>[ 7.075539] qup_i2c f9923000.i2c: I2C slave addr:0x25 not connected
  285. <3>[ 7.081785] pic16f_fw_update pic16F_update_fw,i2c_write 0x01 error
  286. <6>[ 7.082100] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=800 ohm
  287. <6>[ 7.082240] PMIC@SID4: PM8841 v2.1 options: 0, 0, 2, 2
  288. <6>[ 7.082319] PMIC@SID0: PM8941 v3.1 options: 0, 0, 0, 0
  289. <6>[ 7.082563] coresight-fuse fc4be024.fuse: Fuse initialized
  290. <6>[ 7.083287] coresight-cti fc308000.cti: CTI initialized
  291. <6>[ 7.083397] coresight-cti fc309000.cti: CTI initialized
  292. <6>[ 7.083488] coresight-cti fc30a000.cti: CTI initialized
  293. <6>[ 7.083576] coresight-cti fc30b000.cti: CTI initialized
  294. <6>[ 7.083667] coresight-cti fc30c000.cti: CTI initialized
  295. <6>[ 7.083754] coresight-cti fc30d000.cti: CTI initialized
  296. <6>[ 7.083843] coresight-cti fc30e000.cti: CTI initialized
  297. <6>[ 7.083931] coresight-cti fc30f000.cti: CTI initialized
  298. <6>[ 7.084023] coresight-cti fc310000.cti: CTI initialized
  299. <6>[ 7.084110] coresight-cti fc340000.cti: CTI initialized
  300. <6>[ 7.084204] coresight-cti fc341000.cti: CTI initialized
  301. <6>[ 7.084292] coresight-cti fc342000.cti: CTI initialized
  302. <6>[ 7.084384] coresight-cti fc343000.cti: CTI initialized
  303. <6>[ 7.084472] coresight-cti fc344000.cti: CTI initialized
  304. <6>[ 7.084564] coresight-cti fc348000.cti: CTI initialized
  305. <6>[ 7.084653] coresight-cti fc34d000.cti: CTI initialized
  306. <6>[ 7.084810] coresight-cti fc350000.cti: CTI initialized
  307. <6>[ 7.084899] coresight-cti fc354000.cti: CTI initialized
  308. <6>[ 7.084994] coresight-cti fc358000.cti: CTI initialized
  309. <6>[ 7.085378] coresight-csr fc302000.csr: CSR initialized
  310. <3>[ 7.216245] pic16f_fw_update pic16F update_fw fail
  311. <6>[ 7.216251] msm_thermal: Limiting cpu0 max frequency to 1958400
  312. <4>[ 7.217065] Alternate GPT is invalid, using primary GPT.
  313. <6>[ 7.217131] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30
  314. <4>[ 7.244222] pic16f_fw_updat used greatest stack depth: 6012 bytes left
  315. <6>[ 7.250676] msm_thermal: Limiting cpu1 max frequency to 1958400
  316. <6>[ 7.256675] msm_thermal: Limiting cpu2 max frequency to 1958400
  317. <6>[ 7.262972] coresight-tmc fc322000.tmc: Byte Counter feature enabled
  318. <6>[ 7.268895] msm_thermal: Limiting cpu3 max frequency to 1958400
  319. <6>[ 7.274778] sps:BAM 0xfc37c000 is registered.
  320. <6>[ 7.278956] coresight-tmc fc322000.tmc: TMC initialized
  321. <6>[ 7.284413] coresight-tmc fc307000.tmc: TMC initialized
  322. <3>[ 7.290462] coresight-tpiu fc318000.tpiu: seta gpios not specified
  323. <3>[ 7.295695] coresight-tpiu fc318000.tpiu: setb gpios not specified
  324. <6>[ 7.301941] coresight-tpiu fc318000.tpiu: TPIU initialized
  325. <6>[ 7.307744] coresight-funnel fc31b000.funnel: FUNNEL initialized
  326. <6>[ 7.313437] coresight-funnel fc319000.funnel: FUNNEL initialized
  327. <6>[ 7.319397] coresight-funnel fc31a000.funnel: FUNNEL initialized
  328. <6>[ 7.325374] coresight-funnel fc345000.funnel: FUNNEL initialized
  329. <6>[ 7.331394] coresight-funnel fc364000.funnel: FUNNEL initialized
  330. <6>[ 7.337762] coresight-replicator fc31c000.replicator: REPLICATOR initialized
  331. <6>[ 7.344890] coresight-stm fc321000.stm: STM initialized
  332. <6>[ 7.349943] coresight-hwevent fdf30018.hwevent: Hardware Event driver initialized
  333. <6>[ 7.357512] coresight-etm fc33c000.etm: ETM initialized
  334. <6>[ 7.362169] coresight-etm fc33c000.etm: PC save enabled
  335. <6>[ 7.367569] coresight-etm fc33d000.etm: ETM initialized
  336. <6>[ 7.372578] coresight-etm fc33d000.etm: PC save enabled
  337. <6>[ 7.377984] coresight-etm fc33e000.etm: ETM initialized
  338. <6>[ 7.383171] coresight-etm fc33f000.etm: ETM initialized
  339. <6>[ 7.388648] coresight-audio-etm audio_etm0.2: Audio ETM initialized
  340. <6>[ 7.394863] coresight-modem-etm modem_etm0.3: Modem ETM initialized
  341. <6>[ 7.401150] coresight-wcn-etm wcn_etm0.4: Wireless ETM initialized
  342. <6>[ 7.407260] coresight-rpm-etm rpm_etm0.5: RPM ETM initialized
  343. <6>[ 7.413159] usbcore: registered new interface driver snd-usb-audio
  344. <6>[ 7.420180] es325_init(): entry
  345. <6>[ 7.422198] es325_init(): slim_driver_register()es325_init:pcb version:22
  346. <6>[ 7.429099] es325_init(): exit
  347. <6>[ 7.440380] msm-compr-dsp msm-compr-dsp: msm_compr_probe: dev name msm-compr-dsp
  348. <6>[ 7.447384] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
  349. <6>[ 7.454309] platform qcom,msm-voip-dsp.42: Driver msm-voip-dsp requests probe deferral
  350. <6>[ 7.461774] platform qcom,msm-pcm-voice.43: Driver msm-pcm-voice requests probe deferral
  351. <6>[ 7.471556] ocmem: Notifier registered for 5
  352. <4>[ 7.475442] msm8974_asoc_machine_probe:pcb_version 22
  353. <6>[ 7.479961] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
  354. <6>[ 7.488937] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
  355. <6>[ 7.498122] oprofile: using arm/armv7-krait
  356. <6>[ 7.501443] u32 classifier
  357. <6>[ 7.504002] Actions configured
  358. <6>[ 7.507394] Netfilter messages via NETLINK v0.30.
  359. <6>[ 7.512187] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  360. <6>[ 7.518565] ctnetlink v0.93: registering with nfnetlink.
  361. <6>[ 7.523553] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  362. <6>[ 7.530415] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  363. <6>[ 7.536422] xt_time: kernel timezone is -0000
  364. <6>[ 7.540809] ip_tables: (C) 2000-2006 Netfilter Core Team
  365. <6>[ 7.546078] arp_tables: (C) 2002 David S. Miller
  366. <6>[ 7.550507] TCP: cubic registered
  367. <6>[ 7.553745] Initializing XFRM netlink socket
  368. <6>[ 7.558506] NET: Registered protocol family 10
  369. <6>[ 7.564296] Mobile IPv6
  370. <6>[ 7.565774] ip6_tables: (C) 2000-2006 Netfilter Core Team
  371. <6>[ 7.571329] IPv6 over IPv4 tunneling driver
  372. <6>[ 7.575666] NET: Registered protocol family 17
  373. <5>[ 7.579849] Bridge firewalling registered
  374. <6>[ 7.583729] Ebtables v2.0 registered
  375. <6>[ 7.587452] Bluetooth: RFCOMM TTY layer initialized
  376. <6>[ 7.592213] Bluetooth: RFCOMM socket layer initialized
  377. <6>[ 7.597261] Bluetooth: RFCOMM ver 1.11
  378. <6>[ 7.601057] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  379. <6>[ 7.606290] Bluetooth: BNEP filters: protocol multicast
  380. <6>[ 7.611515] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  381. <6>[ 7.617863] VFP support v0.3: implementor 51 architecture 64 part 6f variant 2 rev 1
  382. <5>[ 7.625187] Registering SWP/SWPB emulation handler
  383. <6>[ 7.637679] gdsc_oxili_gx: disabling
  384. <6>[ 7.640341] gdsc_venus: disabling
  385. <6>[ 7.644158] platform fe12f000.slim: Driver ngd_msm_ctrl requests probe deferral
  386. <4>[ 7.644180] msm8974_asoc_machine_probe:pcb_version 22
  387. <6>[ 7.644355] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
  388. <6>[ 7.644508] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
  389. <3>[ 7.645234] qcom,leds-qpnp leds-qpnp-f6139200: Regulator get failed(-517)
  390. <3>[ 7.645239] qcom,leds-qpnp leds-qpnp-f6139200: Unable to read flash config data
  391. <6>[ 7.645250] spmi leds-qpnp-f6139200: Driver qcom,leds-qpnp requests probe deferral
  392. <6>[ 7.650889] bq24196_vddmax_set voltage:4352
  393. <3>[ 7.651751] bad vbatdet:4252,default to 100mv
  394. <6>[ 7.652607] bq24196_ibatmax_set chg_current:2000
  395. <6>[ 7.655478] batfet:
  396. <6>[ 7.655692] 8941_smbb_otg:
  397. <6>[ 7.655713] 8941_smbb_otg: supplied by 8941_boost
  398. <6>[ 7.656025] 8941_smbb_boost: 5000 mV
  399. <6>[ 7.661042] soc:100, soc_calib:100
  400. <6>[ 7.667561] qpnp_batt_external_power_changed: qpnp_batt_external_power_changed chg_done:0
  401. <6>[ 7.667588] bq24196_charge_en enable:0
  402. <6>[ 7.667674] bq24196_vddmax_set voltage:4352
  403. <6>[ 7.668407] bq24196_iusbmax_set mA:100
  404. <6>[ 7.671446] qpnp_chg_usb_usbin_valid_irq_handler: !!!!!usb_present[1]
  405. <6>[ 7.673726] soc:100, soc_calib:100
  406. <6>[ 7.673734] qpnp_batt_external_power_changed: qpnp_batt_external_power_changed chg_done:0
  407. <6>[ 7.673773] qpnp_batt_external_power_changed: qpnp_batt_external_power_changed chg_done:0
  408. <6>[ 7.674306] qpnp_charger_probe: success chg_dis = 0, bpd = 1, usb = 1, dc = 0 b_health = 1 batt_present = 1
  409. <6>[ 7.674411] platform spi_eth_phy_vreg.71: Driver reg-fixed-voltage requests probe deferral
  410. <6>[ 7.674953] qpnp_bsi_clear_bsi_error: PMIC BSI module in error state, error=5
  411. <6>[ 7.678330] soc:100, soc_calib:100
  412. <6>[ 7.689974] qpnp_bsi_clear_bsi_error: PMIC BSI module in error state, error=5
  413. <3>[ 7.690066] qcom,qpnp-bsi qpnp-bsi-f6136e00: qpnp_bsi_wait_for_tx: transaction error occurred, BSI error=5
  414. <6>[ 7.690181] qpnp_bsi_clear_bsi_error: PMIC BSI module in error state, error=5
  415. <3>[ 7.690278] qcom,qpnp-bsi qpnp-bsi-f6136e00: qpnp_bsi_wait_for_tx: transaction error occurred, BSI error=5
  416. <6>[ 7.690395] qpnp_bsi_clear_bsi_error: PMIC BSI module in error state, error=5
  417. <3>[ 7.690489] qcom,qpnp-bsi qpnp-bsi-f6136e00: qpnp_bsi_wait_for_tx: transaction error occurred, BSI error=5
  418. <6>[ 7.690609] qpnp_bsi_clear_bsi_error: PMIC BSI module in error state, error=5
  419. <3>[ 7.690699] qcom,qpnp-bsi qpnp-bsi-f6136e00: qpnp_bsi_wait_for_tx: transaction error occurred, BSI error=5
  420. <6>[ 7.690816] qpnp_bsi_clear_bsi_error: PMIC BSI module in error state, error=5
  421. <3>[ 7.690907] qcom,qpnp-bsi qpnp-bsi-f6136e00: qpnp_bsi_wait_for_tx: transaction error occurred, BSI error=5
  422. <3>[ 7.690914] bif_add_all_slaves: BIF bus_transaction failed, rc=-5
  423. <6>[ 7.690938] bif_ctrl_register: Battery pack present = Y
  424. <6>[ 7.695315] bif_ctrl_register: Battery pack type = unknown (Rid=887 ohm)
  425. <6>[ 7.695542] 8941_mvs1:
  426. <6>[ 7.695562] 8941_mvs1: supplied by 8941_smbb_otg
  427. <4>[ 7.695938] msm8974_asoc_machine_probe:pcb_version 22
  428. <6>[ 7.695997] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
  429. <6>[ 7.696158] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
  430. <7>[ 7.696644] Registered led device: led:flash_0
  431. <7>[ 7.697010] Registered led device: led:flash_1
  432. <7>[ 7.697192] Registered led device: led:flash_torch
  433. <6>[ 7.697288] platform spi_eth_phy_vreg.71: Driver reg-fixed-voltage requests probe deferral
  434. <4>[ 7.697667] msm8974_asoc_machine_probe:pcb_version 22
  435. <6>[ 7.697726] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
  436. <6>[ 7.697865] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
  437. <6>[ 7.789818] qpnp_batt_external_power_changed: qpnp_batt_external_power_changed chg_done:0
  438. <7>[ 7.968214] gpio_set_debounce: gpio-538 status -22
  439. <7>[ 7.968294] gpio_set_debounce: gpio-539 status -22
  440. <7>[ 7.968363] gpio_set_debounce: gpio-540 status -22
  441. <7>[ 7.968431] gpio_set_debounce: gpio-537 status -22
  442. <7>[ 7.968495] gpio_set_debounce: gpio-68 status -22
  443. <6>[ 7.968756] input: gpio-keys as /devices/gpio_keys.73/input/input2
  444. <6>[ 7.974415] qcom,qpnp-rtc qpnp-rtc-f6138000: setting system clock to 1970-01-05 06:40:00 UTC (369600)
  445. <6>[ 7.974440] platform fe12f000.slim: Driver ngd_msm_ctrl requests probe deferral
  446. <4>[ 7.974680] msm8974_asoc_machine_probe:pcb_version 22
  447. <6>[ 7.974756] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
  448. <6>[ 7.974920] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
  449. <6>[ 7.975016] platform spi_eth_phy_vreg.71: Driver reg-fixed-voltage requests probe deferral
  450. <6>[ 8.020814] clock_late_init: Removing enables held for handed-off clocks
  451. <6>[ 8.031855] ALSA device list:
  452. <6>[ 8.033831] No soundcards found.
  453. <6>[ 8.037747] Freeing init memory: 184K
  454. <7>[ 8.063245] SELinux: 1024 avtab hash slots, 2801 rules.
  455. <7>[ 8.064065] SELinux: 1024 avtab hash slots, 2801 rules.
  456. <7>[ 8.064078] SELinux: 1 users, 2 roles, 293 types, 1 bools, 1 sens, 1024 cats
  457. <7>[ 8.064088] SELinux: 84 classes, 2801 rules
  458. <7>[ 8.064630] SELinux: Completing initialization.
  459. <7>[ 8.064636] SELinux: Setting up existing superblocks.
  460. <7>[ 8.064654] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  461. <7>[ 8.064670] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
  462. <7>[ 8.064790] SELinux: initialized (dev bdev, type bdev), not configured for labeling
  463. <7>[ 8.064804] SELinux: initialized (dev proc, type proc), uses genfs_contexts
  464. <7>[ 8.064823] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  465. <7>[ 8.064843] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
  466. <7>[ 8.075718] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
  467. <7>[ 8.075739] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
  468. <7>[ 8.075755] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
  469. <7>[ 8.075771] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
  470. <7>[ 8.075797] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
  471. <7>[ 8.075903] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  472. <7>[ 8.075941] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  473. <5>[ 8.086956] type=1403 audit(369600.600:2): policy loaded auid=4294967295 ses=4294967295
  474. <4>[ 8.094152] SELinux: Loaded policy from /sepolicy
  475. <4>[ 8.100572] SELinux: Loaded file_contexts from /file_contexts
  476. <6>[ 8.539940] msm-dwc3 msm_dwc3: chg_type = USB_SDP_CHARGER
  477. <6>[ 8.545644] qpnp_batt_external_power_changed: qpnp_batt_external_power_changed chg_done:0
  478. <3>[ 9.962012] init: /init.find7.rc: 801: ignored duplicate definition of service 'wififtmserver'
  479. <3>[ 9.969706] init: /init.find7.rc: 811: ignored duplicate definition of service 'wifisingle'
  480. <3>[ 9.978564] init: could not import file '/init.carrier.rc' from '/init.rc'
  481. <4>[ 9.985179] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  482. <3>[ 9.994277] init: do_chown: Could not access /selinux/booleans
  483. <3>[ 9.995759] init: invalid uid 'fm_radio'
  484. <3>[ 10.388074] init: cannot open '/initlogo.rle'
  485. <7>[ 10.392302] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  486. <7>[ 10.392582] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  487. <7>[ 10.394248] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  488. <7>[ 10.394401] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  489. <7>[ 10.394548] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  490. <7>[ 10.395851] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  491. <6>[ 10.404999] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: barrier=1
  492. <7>[ 10.412605] SELinux: initialized (dev mmcblk0p14, type ext4), uses xattr
  493. <6>[ 10.420670] EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
  494. <7>[ 10.430434] SELinux: initialized (dev mmcblk0p15, type ext4), uses xattr
  495. <6>[ 10.439890] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/userdata
  496. <4>[ 10.480009] e2fsck used greatest stack depth: 5416 bytes left
  497. <6>[ 10.484836] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
  498. <6>[ 10.489390] e2fsck: /dev/block/platform/msm_sdcc.1/by-name/userdata: clean, 838/196608 files, 41745/786432 blocks
  499. <6>[ 10.508088] EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc
  500. <7>[ 10.517017] SELinux: initialized (dev mmcblk0p15, type ext4), uses xattr
  501. <6>[ 10.524584] EXT4-fs (mmcblk0p17): mounted filesystem with ordered data mode. Opts: barrier=1
  502. <7>[ 10.532114] SELinux: initialized (dev mmcblk0p17, type ext4), uses xattr
  503. <6>[ 10.539291] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts: barrier=1
  504. <7>[ 10.546833] SELinux: initialized (dev mmcblk0p16, type ext4), uses xattr
  505. <7>[ 10.552572] SELinux: initialized (dev mmcblk0p1, type vfat), uses genfs_contexts
  506. <7>[ 10.573471] SELinux: 1024 avtab hash slots, 2801 rules.
  507. <7>[ 10.574300] SELinux: 1024 avtab hash slots, 2801 rules.
  508. <7>[ 10.574314] SELinux: 1 users, 2 roles, 293 types, 1 bools, 1 sens, 1024 cats
  509. <7>[ 10.574324] SELinux: 84 classes, 2801 rules
  510. <5>[ 10.595124] type=1403 audit(369603.100:3): policy loaded auid=4294967295 ses=4294967295
  511. <4>[ 10.602361] SELinux: Loaded policy from /sepolicy
  512. <4>[ 10.609001] SELinux: Loaded file_contexts from /file_contexts
  513. <4>[ 10.614843] SELinux: Skipping restorecon_recursive(/data)
  514. <6>[ 10.623767] wcnss_wlan triggered by userspace
  515. <3>[ 10.659857] wcnss_trigger_config: adc get failed
  516. <5>[ 10.666847] type=1400 audit(369603.170:4): avc: denied { search } for pid=186 comm="ueventd" name="/" dev="mmcblk0p1" ino=1 scontext=u:r:ueventd:s0 tcontext=u:object_r:sdcard_external:s0 tclass=dir
  517. <5>[ 10.684958] type=1400 audit(369603.190:5): avc: denied { read } for pid=186 comm="ueventd" name="wcnss.mdt" dev="mmcblk0p1" ino=3 scontext=u:r:ueventd:s0 tcontext=u:object_r:sdcard_external:s0 tclass=file
  518. <5>[ 10.702463] type=1400 audit(369603.210:6): avc: denied { open } for pid=186 comm="ueventd" name="wcnss.mdt" dev="mmcblk0p1" ino=3 scontext=u:r:ueventd:s0 tcontext=u:object_r:sdcard_external:s0 tclass=file
  519. <5>[ 10.720922] type=1400 audit(369603.230:7): avc: denied { getattr } for pid=186 comm="ueventd" path="/firmware/image/wcnss.mdt" dev="mmcblk0p1" ino=3 scontext=u:r:ueventd:s0 tcontext=u:object_r:sdcard_external:s0 tclass=file
  520. <6>[ 10.741704] pil_pronto fb21b000.qcom,pronto: wcnss: loading from 0x05a00000 to 0x0600e000
  521. <6>[ 10.932737] pil_pronto fb21b000.qcom,pronto: wcnss: Brought out of reset
  522. <6>[ 11.494259] pil_pronto fb21b000.qcom,pronto: Subsystem error monitoring/handling services are up
  523. <6>[ 11.502770] platform spi_eth_phy_vreg.71: Driver reg-fixed-voltage requests probe deferral
  524. <3>[ 11.510490] diag: In diag_send_msg_mask_update, invalid status 0
  525. <3>[ 11.516125] diag: In diag_send_log_mask_update, invalid status 0msm8974_asoc_machine_probe:pcb_version 22
  526. <6>[ 11.517353] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
  527. <6>[ 11.517704] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
  528. <6>[ 11.518070] platform fe12f000.slim: Driver ngd_msm_ctrl requests probe deferral
  529. <7>[ 11.524662] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  530. <6>[ 11.527322] msm_thermal: Core control disabled
  531. <6>[ 11.529797] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  532. <6>[ 11.560089] pil_pronto fb21b000.qcom,pronto: wcnss: Power/Clock ready interrupt received
  533. <6>[ 11.562872] coresight-etm fc33e000.etm: PC save enabled
  534. <6>[ 11.566314] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  535. <6>[ 11.568865] coresight-etm fc33f000.etm: PC save enabled
  536. <6>[ 11.571048] msm_thermal: Core control enabled
  537. <3>[ 11.571054] msm_thermal: Hotplug task is not initialized
  538. <6>[ 11.604630] pil-q6v5-lpass fe200000.qcom,lpass: adsp: loading from 0x06100000 to 0x07500000
  539. <6>[ 11.652785] pil-q6v5-mss fc880000.qcom,mss: mba: loading from 0x0d100000 to 0x0d139000
  540. <6>[ 11.698992] pil-q6v5-mss fc880000.qcom,mss: mba: Brought out of reset
  541. <6>[ 11.717201] pil-q6v5-mss fc880000.qcom,mss: modem: loading from 0x08000000 to 0x0d100000
  542. <6>[ 11.756890] platform fe12f000.slim: Driver ngd_msm_ctrl requests probe deferral
  543. <6>[ 11.763864] wcnss_wlan_ctrl_probe: SMD ctrl channel up
  544. <6>[ 11.771909] wcnss: version 01050102
  545. <6>[ 11.774422] wcnss: schedule dnld work for pronto
  546. <4>[ 11.779412] msm8974_asoc_machine_probe:pcb_version 22
  547. <6>[ 11.794094] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
  548. <6>[ 11.806286] msm_thermal: Max frequency reset for cpu0
  549. <6>[ 11.812518] msm_thermal: Max frequency reset for cpu1
  550. <6>[ 11.817280] msm_thermal: Max frequency reset for cpu2
  551. <6>[ 11.822306] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
  552. <6>[ 11.825298] msm_thermal: Max frequency reset for cpu3
  553. <6>[ 11.825337] wcnss: build version MSM8974-PR_1_4_c2-00084
  554. <6>[ 11.825350] wcnss: NV download
  555. <6>[ 11.844369] platform spi_eth_phy_vreg.71: Driver reg-fixed-voltage requests probe deferral
  556. <6>[ 11.857851] wcnss: NV bin size: 29812, total_fragments: 10
  557. <3>[ 11.865244] wcnss: no space available for smd frame
  558. <3>[ 11.889826] wcnss: no space available for smd frame
  559. <3>[ 11.919847] wcnss: no space available for smd frame
  560. <3>[ 11.949882] wcnss: no space available for smd frame
  561. <3>[ 12.000960] wcnss: not setting up vbatt
  562. <6>[ 12.055938] platform spi_eth_phy_vreg.71: Driver reg-fixed-voltage requests probe deferral
  563. <6>[ 12.062483] pil-q6v5-lpass fe200000.qcom,lpass: adsp: Brought out of reset
  564. <6>[ 12.062512] adsp-loader qcom,msm-adsp-loader.35: adsp_loader_do: Q6/ADSP image is loaded
  565. <3>[ 12.069004] healthd: wakealarm_init: timerfd_create failed
  566. <3>[ 12.069233] init: cannot find '/system/bin/auditd', disabling 'auditd'
  567. <3>[ 12.074087] init: cannot find '/system/bin/ptt_socket_app', disabling 'ptt_socket_app'
  568. <3>[ 12.074266] init: cannot find '/system/bin/qrngd', disabling 'qrngd'
  569. <4>[ 12.105202] msm8974_asoc_machine_probe:pcb_version 22
  570. <6>[ 12.109521] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
  571. <6>[ 12.118626] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
  572. <3>[ 12.119190] diag: In diag_send_msg_mask_update, invalid status 0
  573. <3>[ 12.119197] diag: In diag_send_log_mask_update, invalid status 0
  574. <6>[ 12.138132] pil-q6v5-lpass fe200000.qcom,lpass: adsp: Power/Clock ready interrupt received
  575. <6>[ 12.140058] taiko-slim taiko-slim-pgd: Platform data from device tree
  576. <6>[ 12.140400] taiko-slim taiko-slim-pgd: cdc-vdd-buck: vol=[2150000 2150000]uV, curr=[650000]uA, ond 0
  577. <6>[ 12.140445] taiko-slim taiko-slim-pgd: cdc-vdd-tx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
  578. <6>[ 12.140487] taiko-slim taiko-slim-pgd: cdc-vdd-rx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
  579. <6>[ 12.140533] taiko-slim taiko-slim-pgd: cdc-vddpx-1: vol=[1800000 1800000]uV, curr=[10000]uA, ond 0
  580. <6>[ 12.140582] taiko-slim taiko-slim-pgd: cdc-vdd-a-1p2v: vol=[1225000 1225000]uV, curr=[10000]uA, ond 0
  581. <6>[ 12.140627] taiko-slim taiko-slim-pgd: cdc-vddcx-1: vol=[1225000 1225000]uV, curr=[10000]uA, ond 0
  582. <6>[ 12.140672] taiko-slim taiko-slim-pgd: cdc-vddcx-2: vol=[1225000 1225000]uV, curr=[10000]uA, ond 0
  583. <4>[ 12.140918] wcd9xxx_slim_probe:get the hpmic regulator, count 1
  584. <6>[ 12.144327] apr_tal:Q6 Is Up
  585. <6>[ 12.145166] pil-q6v5-lpass fe200000.qcom,lpass: Subsystem error monitoring/handling services are up
  586. <3>[ 12.154762] init: cannot find '/system/bin/mm-gesture-daemon', disabling 'qgesturesvr'
  587. <3>[ 12.157170] enable_store: android_usb: already disabled
  588. <6>[ 12.163269] adb_open
  589. <6>[ 12.163279] mtp_bind_config
  590. <6>[ 12.222883] 'opened /dev/adsprpc-smd c 244 0'
  591. <3>[ 12.259821] ngd_msm_ctrl fe12f000.slim: ADSP slimbus not up yet
  592. <6>[ 12.265917] Slimbus QMI NGD CB received event:2
  593. <6>[ 12.269795] dwc3 f9200000.dwc3: Avail curr from USB = 2
  594. <6>[ 12.275032] android_work: android_work: did not send uevent (0 0 (null))
  595. <6>[ 12.275041] slim_clk_pause: txn-rsp for 0 pending
  596. <6>[ 12.286450] qpnp_batt_external_power_changed: qpnp_batt_external_power_changed chg_done:0
  597. <6>[ 12.294645] SLIM SAT: Received master capability
  598. <6>[ 12.299076] sps:BAM 0xfe104000 (va:0xf7b00000) enabled: ver:0x13, number of pipes:31
  599. <6>[ 12.306968] sps:BAM 0xfe104000 is registered.
  600. <6>[ 12.314523] slimbus:1 laddr:0xcb, EAPC:0x1:0xa0
  601. <6>[ 12.318750] slimbus:1 laddr:0xca, EAPC:0x0:0xa0
  602. <6>[ 12.329500] taiko-slim taiko-slim-pgd: wcd9xxx_check_codec_type: detected taiko_codec, major 0x102, minor 0x1, ver 0x2
  603. <6>[ 12.339587] wcd9xxx_core_res_init: num_irqs = 31, num_irq_regs = 4
  604. <6>[ 12.345609] msm_thermal: enabled = 0
  605. <6>[ 12.349818] taiko_probe:pcb_version 22
  606. <6>[ 12.353805] platform spi_eth_phy_vreg.71: Driver reg-fixed-voltage requests probe deferral
  607. <6>[ 12.362122] msm8974_asoc_machine_probe:pcb_version 22
  608. <6>[ 12.366914] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
  609. <6>[ 12.376260] taiko_codec taiko_codec: taiko_codec_probe()
  610. <6>[ 12.382696] taiko_codec_probe: get the hpmic regulator
  611. <6>[ 12.390107] dwc3 f9200000.dwc3: Avail curr from USB = 0
  612. <6>[ 12.394503] qpnp_batt_external_power_changed: qpnp_batt_external_power_changed chg_done:0
  613. <6>[ 12.411950] warning: `qseecomd' uses 32-bit capabilities (legacy support in use)
  614. <6>[ 12.445283] android_work: android_work: did not send uevent (0 0 (null))
  615. <6>[ 12.518142] android_work: android_work: sent uevent USB_STATE=CONNECTED
  616. <6>[ 12.525442] android_usb gadget: high-speed config #1: fe8050c8.android_usb
  617. <6>[ 12.528810] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
  618. <6>[ 12.529203] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
  619. <6>[ 12.529536] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok
  620. <6>[ 12.530105] asoc: snd-soc-dummy-dai <-> VoIP mapping ok
  621. <6>[ 12.540159] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
  622. <6>[ 12.540843] asoc: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok
  623. <6>[ 12.541428] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
  624. <6>[ 12.541962] asoc: msm-stub-rx <-> msm-dai-q6-dev.241 mapping ok
  625. <6>[ 12.542559] asoc: msm-stub-tx <-> msm-dai-q6-dev.240 mapping ok
  626. <6>[ 12.543271] asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
  627. <6>[ 12.543901] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
  628. <6>[ 12.544489] asoc: snd-soc-dummy-dai <-> SLIMBUS1_HOSTLESS mapping ok
  629. <6>[ 12.545098] asoc: snd-soc-dummy-dai <-> SLIMBUS3_HOSTLESS mapping ok
  630. <6>[ 12.545694] asoc: snd-soc-dummy-dai <-> SLIMBUS4_HOSTLESS mapping ok
  631. <6>[ 12.546353] asoc: snd-soc-dummy-dai <-> VoLTE mapping ok
  632. <6>[ 12.547057] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
  633. <6>[ 12.547645] asoc: snd-soc-dummy-dai <-> LSM mapping ok
  634. <6>[ 12.548344] asoc: snd-soc-dummy-dai <-> MultiMedia6 mapping ok
  635. <6>[ 12.548940] asoc: snd-soc-dummy-dai <-> MultiMedia7 mapping ok
  636. <6>[ 12.549639] asoc: snd-soc-dummy-dai <-> MultiMedia8 mapping ok
  637. <6>[ 12.550399] asoc: snd-soc-dummy-dai <-> QCHAT mapping ok
  638. <6>[ 12.550961] asoc: snd-soc-dummy-dai <-> HDMI_HOSTLESS mapping ok
  639. <6>[ 12.551509] asoc: taiko_vifeedback <-> msm-dai-q6-dev.16393 mapping ok
  640. <6>[ 12.552034] asoc: taiko_rx2 <-> msm-dai-q6-dev.16388 mapping ok
  641. <6>[ 12.552621] asoc: taiko_tx2 <-> msm-dai-q6-dev.16389 mapping ok
  642. <6>[ 12.553158] asoc: msm-stub-rx <-> msm-dai-q6-dev.12288 mapping ok
  643. <6>[ 12.553677] asoc: msm-stub-tx <-> msm-dai-q6-dev.12289 mapping ok
  644. <6>[ 12.554181] asoc: msm-stub-rx <-> msm-dai-q6-dev.12292 mapping ok
  645. <6>[ 12.554719] asoc: msm-stub-tx <-> msm-dai-q6-dev.12293 mapping ok
  646. <6>[ 12.555208] asoc: msm-stub-rx <-> msm-dai-q6-dev.224 mapping ok
  647. <6>[ 12.555724] asoc: msm-stub-tx <-> msm-dai-q6-dev.225 mapping ok
  648. <6>[ 12.556253] asoc: msm-stub-rx <-> msm-dai-q6-auxpcm.1 mapping ok
  649. <6>[ 12.556771] asoc: msm-stub-tx <-> msm-dai-q6-auxpcm.1 mapping ok
  650. <6>[ 12.557284] asoc: msm-stub-rx <-> msm-dai-q6-auxpcm.2 mapping ok
  651. <6>[ 12.557786] asoc: msm-stub-tx <-> msm-dai-q6-auxpcm.2 mapping ok
  652. <6>[ 12.558250] msm_audrx_init(), dev_namemsm-dai-q6-dev.16384
  653. <6>[ 12.743787] dwc3 f9200000.dwc3: Avail curr from USB = 500
  654. <6>[ 12.749885] qpnp_batt_external_power_changed: qpnp_batt_external_power_changed chg_done:0
  655. <6>[ 12.758632] msm_audrx_init:enable_spk_gpio(73)
  656. <6>[ 12.762265] msm_audrx_init:yda145_ctr_gpio(77)
  657. <6>[ 12.766546] msm_audrx_init:yda145_boost_gpio(67)
  658. <6>[ 12.771285] taiko_hs_detect: get the hpmic regulator
  659. <6>[ 12.776410] qpnp_check_charger_uovp: qpnp_check_charger_uovp 5012 0
  660. <6>[ 12.782467] bq24196_usb_suspend_enable enable:0
  661. <6>[ 12.787824] bq24196_charge_en enable:1
  662. <3>[ 12.792534] qpnp_start_charging: qpnp_start_charging:starting to enable charging
  663. <6>[ 12.799302] bq24196_iusbmax_set mA:500
  664. <6>[ 12.803934] bq24196_vddmax_set voltage:4352
  665. <6>[ 12.808828] bq24196_ibatmax_set chg_current:1024
  666. <6>[ 12.812946] android_work: android_work: sent uevent USB_STATE=CONFIGURED
  667. <6>[ 12.820535] bq24196_ibatmax_set chg_current:1024
  668. <6>[ 12.824281] soc:100, soc_calib:100
  669. <3>[ 12.828679] bad vbatdet:4252,default to 100mv
  670. <6>[ 12.833457] bq24196_charge_en enable:1
  671. <6>[ 12.840736] soc:100, soc_calib:100
  672. <3>[ 12.843171] is_alow_fast_chg: is_alow_fast_chg auth:1,temp:275,cap:100,chg_type:4,low_temp_full:0
  673. <4>[ 12.843299] QSEECOM: qseecom_release: data: released=false, type=1, mode=0, data=0xf3101a80
  674. <6>[ 12.860615] switch_fast_chg: switch_fast_chg end,allow_fast_chg:0
  675. <6>[ 12.875402] alarm_set_rtc: Failed to set RTC, time will be lost on reboot
  676. <6>[ 12.881376] alarm qpnp-rtc.c .c qpnp_rtc_set_alarm
  677. <6>[ 13.020576] EXT4-fs (mmcblk0p14): re-mounted. Opts: (null)
  678. <4>[ 13.034913] QSEECOM: qseecom_load_app: App (keymaste) does'nt exist, loading apps for first time
  679. <4>[ 13.043993] QSEECOM: qseecom_load_app: App with id 2 (keymaste) now loaded
  680. <6>[ 13.074400] soc:100, soc_calib:100
  681. <6>[ 13.078695] asoc: taiko_rx1 <-> msm-dai-q6-dev.16384 mapping ok
  682. <6>[ 13.086126] asoc: taiko_tx1 <-> msm-dai-q6-dev.16385 mapping ok
  683. <6>[ 13.092147] asoc: taiko_rx1 <-> msm-dai-q6-dev.16386 mapping ok
  684. <6>[ 13.097892] asoc: taiko_tx1 <-> msm-dai-q6-dev.16387 mapping ok
  685. <6>[ 13.104223] asoc: taiko_rx1 <-> msm-dai-q6-dev.16390 mapping ok
  686. <6>[ 13.109191] soc:100, soc_calib:100
  687. <6>[ 13.110163] asoc: taiko_tx1 <-> msm-dai-q6-dev.16391 mapping ok
  688. <6>[ 13.110783] asoc: taiko_rx1 <-> msm-dai-q6-dev.16392 mapping ok
  689. <6>[ 13.111847] asoc: msm-stub-tx <-> msm-dai-q6-dev.32772 mapping ok
  690. <6>[ 13.112405] asoc: msm-stub-tx <-> msm-dai-q6-dev.32771 mapping ok
  691. <6>[ 13.112943] asoc: taiko_mad1 <-> msm-dai-q6-dev.16395 mapping ok
  692. <6>[ 13.113502] asoc: msm-stub-rx <-> msm-dai-q6-dev.32773 mapping ok
  693. <3>[ 13.114924] msm8974-asoc-taiko fe02c000.sound: DAI AIF widget for MM_UL6 not found
  694. <3>[ 13.114939] msm8974-asoc-taiko fe02c000.sound: DAI AIF widget for MM_UL6 not found
  695. <3>[ 13.114953] msm8974-asoc-taiko fe02c000.sound: DAI AIF widget for MM_UL6 not found
  696. <3>[ 13.114966] msm8974-asoc-taiko fe02c000.sound: DAI AIF widget for MM_UL6 not found
  697. <3>[ 13.114979] msm8974-asoc-taiko fe02c000.sound: DAI AIF widget for MM_UL6 not found
  698. <3>[ 13.114992] msm8974-asoc-taiko fe02c000.sound: DAI AIF widget for MM_UL6 not found
  699. <3>[ 13.115005] msm8974-asoc-taiko fe02c000.sound: DAI AIF widget for MM_UL6 not found
  700. <3>[ 13.115018] msm8974-asoc-taiko fe02c000.sound: DAI AIF widget for MM_UL6 not found
  701. <3>[ 13.115030] msm8974-asoc-taiko fe02c000.sound: DAI AIF widget for MM_UL6 not found
  702. <3>[ 13.115043] msm8974-asoc-taiko fe02c000.sound: DAI AIF widget for MM_UL6 not found
  703. <3>[ 13.115048] msm-dai-fe msm-dai-fe: unable to find capture DAI AIF MM_UL6
  704. <6>[ 13.124909] EXT4-fs (mmcblk0p14): re-mounted. Opts: (null)
  705. <3>[ 13.141841] MSM-CPP msm_cpp_poll:451 Poll failed: expect: 0x1
  706. <6>[ 13.145945] input: msm8974-taiko-mtp-snd-card Button Jack as /devices/fe02c000.sound/sound/card0/input3
  707. <6>[ 13.146775] input: msm8974-taiko-mtp-snd-card Headset Jack as /devices/fe02c000.sound/sound/card0/input4
  708. <6>[ 13.154712] msm8974-asoc-taiko fe02c000.sound: property qcom,us-euro-gpios not detected in node /soc/sound
  709. <6>[ 13.155215] platform spi_eth_phy_vreg.71: Driver reg-fixed-voltage requests probe deferral
  710. <3>[ 13.184846] MSM-CPP msm_cpp_poll:451 Poll failed: expect: 0x1
  711. <3>[ 13.231130] MSM-CPP msm_cpp_poll:451 Poll failed: expect: 0xabcdefaa
  712. <6>[ 13.231147] MSM-CPP cpp_load_fw:855 MC Bootloader Version: 0x3e646d63
  713. <6>[ 13.245453] MSM-CPP cpp_load_fw:867 CPP FW Version: 0x1002000a
  714. <6>[ 13.318541] soc:100, soc_calib:100
  715. <6>[ 13.320568] EXT4-fs (mmcblk0p14): re-mounted. Opts: (null)
  716. <6>[ 13.340701] soc:100, soc_calib:100
  717. <6>[ 13.459802] pil-q6v5-mss fc880000.qcom,mss: modem: Brought out of reset
  718. <3>[ 13.523175] Notify: smsm init
  719. <6>[ 13.562942] pil-q6v5-mss fc880000.qcom,mss: Subsystem error monitoring/handling services are up
  720. <6>[ 13.562965] pil-q6v5-mss fc880000.qcom,mss: mba: Power/Clock ready interrupt received
  721. <6>[ 13.563078] platform spi_eth_phy_vreg.71: Driver reg-fixed-voltage requests probe deferral
  722. <3>[ 13.606584] msm_routing_get_dolby_dap_param_to_get_control, port_id not set, returning error
  723. <3>[ 13.614248] APR: Wrong parameters
  724. <3>[ 13.617609] adm_get_params: Failed to Get Params on port 16385
  725. <3>[ 13.623377] msm_routing_get_rms_value_control: get parameters failed
  726. <3>[ 13.647597] msm_voice_gain_put: volume: 0 session_id: 0xffffffff ramp_duration: 20
  727. <3>[ 13.676993] msm_audio_ion_import: DMA Buf name=audio_acdb_client, fd=21 handle=f37d5a80
  728. <6>[ 13.759312] platform spi_eth_phy_vreg.71: Driver reg-fixed-voltage requests probe deferral
  729. <6>[ 13.764716] apr_tal:Modem Is Up
  730. <6>[ 13.770409] platform spi_eth_phy_vreg.71: Driver reg-fixed-voltage requests probe deferral
  731. <3>[ 13.771401] diag: In diag_send_msg_mask_update, invalid status 0
  732. <3>[ 13.771407] diag: In diag_send_log_mask_update, invalid status 0
  733. <6>[ 13.979402] platform spi_eth_phy_vreg.71: Driver reg-fixed-voltage requests probe deferral
  734. <7>[ 14.038212] mdss_dsi_event_handler+:event=1
  735. <7>[ 14.038230] mdss_dsi_event_handler: unhandled event=1
  736. <7>[ 14.038248] mdss_dsi_event_handler-:event=1, rc=0
  737. <7>[ 14.038262] mdss_dsi_event_handler+:event=1
  738. <7>[ 14.038276] mdss_dsi_event_handler: unhandled event=1
  739. <7>[ 14.038291] mdss_dsi_event_handler-:event=1, rc=0
  740. <7>[ 14.039269] mdss_dsi_event_handler+:event=2
  741. <4>[ 14.039274] mdss_dsi_on:410 Panel already on.
  742. <7>[ 14.042668] mdss_dsi_unblank+:
  743. <7>[ 14.042673] mdss_dsi_unblank-:
  744. <7>[ 14.042680] mdss_dsi_event_handler-:event=2, rc=0
  745. <7>[ 14.042685] mdss_dsi_event_handler+:event=2
  746. <4>[ 14.042690] mdss_dsi_on:410 Panel already on.
  747. <7>[ 14.046967] mdss_dsi_unblank+:
  748. <7>[ 14.046973] mdss_dsi_unblank-:
  749. <7>[ 14.046978] mdss_dsi_event_handler-:event=2, rc=0
  750. <7>[ 14.048559] mdss_dsi_event_handler+:event=3
  751. <7>[ 14.048568] mdss_dsi_event_handler-:event=3, rc=0
  752. <7>[ 14.048575] mdss_dsi_event_handler+:event=3
  753. <7>[ 14.048582] mdss_dsi_event_handler-:event=3, rc=0
  754. <3>[ 14.053962] msm_iommu_v1: Unexpected IOMMU page fault!
  755. <3>[ 14.058853] msm_iommu_v1: name = mdp_iommu
  756. <3>[ 14.062249] msm_iommu_v1: context = mdp_0 (0)
  757. <3>[ 14.066605] msm_iommu_v1: Interesting registers:
  758. <3>[ 14.066629] msm_iommu_v1: FAR = 0000000003c85250
  759. <3>[ 14.066634] msm_iommu_v1: PAR = 0000000000000000
  760. <3>[ 14.066641] msm_iommu_v1: FSR = 00000002 [TF ]
  761. <3>[ 14.066646] msm_iommu_v1: FSYNR0 = 000005a2 FSYNR1 = 000b0005
  762. <3>[ 14.066651] msm_iommu_v1: TTBR0 = 00000000358b8000
  763. <3>[ 14.066656] msm_iommu_v1: TTBR1 = 0000000000000000
  764. <3>[ 14.066661] msm_iommu_v1: SCTLR = 00001043 ACTLR = 70000000
  765. <3>[ 14.066667] msm_iommu_v1: PRRR = ff0a81a8 NMRR = 40e040e0
  766. <3>[ 14.113483] msm_iommu_v1: Unexpected IOMMU page fault!
  767. <3>[ 14.113491] msm_iommu_v1: name = mdp_iommu
  768. <3>[ 14.113498] msm_iommu_v1: context = mdp_0 (0)
  769. <3>[ 14.113502] msm_iommu_v1: Interesting registers:
  770. <3>[ 14.113526] msm_iommu_v1: FAR = 0000000003c83e80
  771. <3>[ 14.113531] msm_iommu_v1: PAR = 0000000000000000
  772. <3>[ 14.113537] msm_iommu_v1: FSR = 00000002 [TF ]
  773. <3>[ 14.113543] msm_iommu_v1: FSYNR0 = 000005a2 FSYNR1 = 000b0001
  774. <3>[ 14.113548] msm_iommu_v1: TTBR0 = 00000000358b8000
  775. <3>[ 14.113552] msm_iommu_v1: TTBR1 = 0000000000000000
  776. <3>[ 14.113558] msm_iommu_v1: SCTLR = 00001043 ACTLR = 70000000
  777. <3>[ 14.113564] msm_iommu_v1: PRRR = ff0a81a8 NMRR = 40e040e0
  778. <6>[ 14.180851] qpnp_check_charger_uovp: qpnp_check_charger_uovp 4851 0
  779. <6>[ 14.186242] sps:BAM 0xfc834000 is registered.
  780. <6>[ 14.191288] platform spi_eth_phy_vreg.71: Driver reg-fixed-voltage requests probe deferral
  781. <6>[ 14.194988] qpnp_check_battery_uovp: qpnp_check_battery_uovp bat vol:4288000
  782. <6>[ 14.196238] qpnp_check_battery_temp: qpnp_check_battery_temp temp:275
  783. <6>[ 14.197137] update_heartbeat: update_heartbeat current:568
  784. <6>[ 14.217952] sps:BAM 0xfc834000 (va:0xc6168000) enabled: ver:0x20, number of pipes:6
  785. <6>[ 14.225829] soc:100, soc_calib:100
  786. <6>[ 14.240545] soc:100, soc_calib:100
  787. <6>[ 14.692432] platform spi_eth_phy_vreg.71: Driver reg-fixed-voltage requests probe deferral
  788. <6>[ 14.700837] platform spi_eth_phy_vreg.71: Driver reg-fixed-voltage requests probe deferral
  789. <6>[ 14.710517] platform spi_eth_phy_vreg.71: Driver reg-fixed-voltage requests probe deferral
  790. <4>[ 15.479111] thermal-engine used greatest stack depth: 5396 bytes left
  791. <6>[ 16.576314] soc:100, soc_calib:100
  792. <6>[ 16.668325] lowmem_shrink: convert oom_adj to oom_score_adj:
  793. <6>[ 16.673246] oom_adj 0 => oom_score_adj 0
  794. <6>[ 16.676931] oom_adj 1 => oom_score_adj 58
  795. <6>[ 16.681191] oom_adj 2 => oom_score_adj 117
  796. <6>[ 16.685092] oom_adj 3 => oom_score_adj 176
  797. <6>[ 16.689122] oom_adj 9 => oom_score_adj 529
  798. <6>[ 16.693461] oom_adj 15 => oom_score_adj 1000
  799. <6>[ 16.963604] acc_open
  800. <6>[ 16.964893] acc_release
  801. <6>[ 17.484006] platform spi_eth_phy_vreg.71: Driver reg-fixed-voltage requests probe deferral
  802. <4>[ 17.502487] EXT4-fs (mmcblk0p29): warning: mounting fs with errors, running e2fsck is recommended
  803. <6>[ 17.511141] EXT4-fs (mmcblk0p29): mounted filesystem with ordered data mode. Opts:
  804. <7>[ 17.518079] SELinux: initialized (dev mmcblk0p29, type ext4), uses mountpoint labeling
  805. <7>[ 17.715432] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
RAW Paste Data