# generated by Slic3r 0.9.2-dev on Sun Oct 14 22:06:02 2012
acceleration = 0
bed_size = 200,200
bed_temperature = 65
bridge_fan_speed = 100
bridge_flow_ratio = 0.93
bridge_speed = 20
brim_width = 0
complete_objects = 0
cooling = 1
disable_fan_first_layers = 0
duplicate = 1
duplicate_distance = 6
duplicate_grid = 1,1
end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors\nM140 S0 ; turn off bed temperature
external_perimeter_speed = 100%
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extruder_offset = 0x0
extrusion_axis = E
extrusion_multiplier = 1.15
extrusion_width = 220%
fan_always_on = 1
fan_below_layer_time = 100
filament_diameter = 1.65
fill_angle = 45
fill_density = 0.18
fill_pattern = honeycomb
first_layer_bed_temperature = 65
first_layer_extrusion_width = 200%
first_layer_height = 100%
first_layer_speed = 20%
first_layer_temperature = 170
g0 = 0
gcode_arcs = 0
gcode_comments = 0
gcode_flavor = reprap
infill_acceleration = 50
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_speed = 60
layer_gcode =
layer_height = 0.3
max_fan_speed = 100
min_fan_speed = 100
min_print_speed = 10
notes =
nozzle_diameter = 0.57
only_retract_when_crossing_perimeters = 0
output_filename_format = [input_filename_base].gcode
perimeter_acceleration = 25
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 40
perimeters = 2
post_process =
print_center = 100,100
randomize_start = 1
retract_before_travel = 4
retract_length = 1.5
retract_length_toolchange = 3
retract_lift = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 12
rotate = 0
scale = 1
skirt_distance = 10
skirt_height = 1
skirts = 1
slowdown_below_layer_time = 15
small_perimeter_speed = 40
solid_fill_pattern = rectilinear
solid_infill_below_area = 70
solid_infill_speed = 50
solid_layers = 3
start_gcode = G28 ; home all axes
support_material =
support_material_angle = 45
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_pattern = rectilinear
support_material_spacing = 1
support_material_threshold = 45
temperature = 150
threads = 2
top_solid_infill_speed = 40
travel_speed = 135
use_relative_e_distances = 0
z_offset = 0