GO API tools faq
paste
Guest User

Untitled

a guest
Jan 15th, 2020
12
174 days
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.51 KB
raw download clone embed report print
  1. === START OF INFORMATION SECTION ===
  2. Model Family: Western Digital Red
  3. Device Model: WDC WD30EFRX-68EUZN0
  4. LU WWN Device Id: 5 0014ee 0aeab0fe8
  5. Firmware Version: 82.00A82
  6. User Capacity: 3 000 592 982 016 bytes [3,00 TB]
  7. Sector Sizes: 512 bytes logical, 4096 bytes physical
  8. Rotation Rate: 5400 rpm
  9. Device is: In smartctl database [for details use: -P show]
  10. ATA Version is: ACS-2 (minor revision not indicated)
  11. SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
  12. Local Time is: Wed Jan 15 11:33:32 2020 CET
  13. SMART support is: Available - device has SMART capability.
  14. SMART support is: Enabled
  15.  
  16. === START OF READ SMART DATA SECTION ===
  17. SMART overall-health self-assessment test result: PASSED
  18.  
  19. General SMART Values:
  20. Offline data collection status: (0x85) Offline data collection activity
  21. was aborted by an interrupting command from host.
  22. Auto Offline Data Collection: Enabled.
  23. Self-test execution status: ( 17) The self-test routine was aborted by
  24. the host.
  25. Total time to complete Offline
  26. data collection: (39600) seconds.
  27. Offline data collection
  28. capabilities: (0x7b) SMART execute Offline immediate.
  29. Auto Offline data collection on/off support.
  30. Suspend Offline collection upon new
  31. command.
  32. Offline surface scan supported.
  33. Self-test supported.
  34. Conveyance Self-test supported.
  35. Selective Self-test supported.
  36. SMART capabilities: (0x0003) Saves SMART data before entering
  37. power-saving mode.
  38. Supports SMART auto save timer.
  39. Error logging capability: (0x01) Error logging supported.
  40. General Purpose Logging supported.
  41. Short self-test routine
  42. recommended polling time: ( 2) minutes.
  43. Extended self-test routine
  44. recommended polling time: ( 398) minutes.
  45. Conveyance self-test routine
  46. recommended polling time: ( 5) minutes.
  47. SCT capabilities: (0x703d) SCT Status supported.
  48. SCT Error Recovery Control supported.
  49. SCT Feature Control supported.
  50. SCT Data Table supported.
  51.  
  52. SMART Attributes Data Structure revision number: 16
  53. Vendor Specific SMART Attributes with Thresholds:
  54. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  55. 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
  56. 3 Spin_Up_Time 0x0027 192 180 021 Pre-fail Always - 5383
  57. 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 73
  58. 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
  59. 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
  60. 9 Power_On_Hours 0x0032 089 089 000 Old_age Always - 8600
  61. 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
  62. 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
  63. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 73
  64. 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 31
  65. 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 744
  66. 194 Temperature_Celsius 0x0022 116 108 000 Old_age Always - 34
  67. 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
  68. 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
  69. 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
  70. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
  71. 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
  72.  
  73. SMART Error Log Version: 1
  74. ATA Error Count: 6 (device log contains only the most recent five errors)
  75. CR = Command Register [HEX]
  76. FR = Features Register [HEX]
  77. SC = Sector Count Register [HEX]
  78. SN = Sector Number Register [HEX]
  79. CL = Cylinder Low Register [HEX]
  80. CH = Cylinder High Register [HEX]
  81. DH = Device/Head Register [HEX]
  82. DC = Device Command Register [HEX]
  83. ER = Error register [HEX]
  84. ST = Status register [HEX]
  85. Powered_Up_Time is measured from power on, and printed as
  86. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  87. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  88.  
  89. Error 6 occurred at disk power-on lifetime: 5 hours (0 days + 5 hours)
  90. When the command that caused the error occurred, the device was active or idle.
  91.  
  92. After command completion occurred, registers were:
  93. ER ST SC SN CL CH DH
  94. -- -- -- -- -- -- --
  95. 04 61 46 00 00 00 a0 Device Fault; Error: ABRT
  96.  
  97. Commands leading to the command that caused the error were:
  98. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  99. -- -- -- -- -- -- -- -- ---------------- --------------------
  100. ef 03 46 00 00 00 a0 00 02:56:50.984 SET FEATURES [Set transfer mode]
  101. ec 00 00 00 00 00 a0 00 02:56:50.984 IDENTIFY DEVICE
  102. ec 00 00 00 00 00 a0 00 02:56:50.977 IDENTIFY DEVICE
  103. ef 03 46 00 00 00 a0 00 02:56:50.976 SET FEATURES [Set transfer mode]
  104.  
  105. Error 5 occurred at disk power-on lifetime: 5 hours (0 days + 5 hours)
  106. When the command that caused the error occurred, the device was active or idle.
  107.  
  108. After command completion occurred, registers were:
  109. ER ST SC SN CL CH DH
  110. -- -- -- -- -- -- --
  111. 04 61 46 00 00 00 a0 Device Fault; Error: ABRT
  112.  
  113. Commands leading to the command that caused the error were:
  114. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  115. -- -- -- -- -- -- -- -- ---------------- --------------------
  116. ef 03 46 00 00 00 a0 00 02:56:50.976 SET FEATURES [Set transfer mode]
  117. ec 00 00 00 00 00 a0 00 02:56:50.976 IDENTIFY DEVICE
  118. ec 00 00 00 00 00 a0 00 02:56:50.969 IDENTIFY DEVICE
  119. ef 03 46 00 00 00 a0 00 02:56:50.968 SET FEATURES [Set transfer mode]
  120.  
  121. Error 4 occurred at disk power-on lifetime: 5 hours (0 days + 5 hours)
  122. When the command that caused the error occurred, the device was active or idle.
  123.  
  124. After command completion occurred, registers were:
  125. ER ST SC SN CL CH DH
  126. -- -- -- -- -- -- --
  127. 04 61 46 00 00 00 a0 Device Fault; Error: ABRT
  128.  
  129. Commands leading to the command that caused the error were:
  130. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  131. -- -- -- -- -- -- -- -- ---------------- --------------------
  132. ef 03 46 00 00 00 a0 00 02:56:50.968 SET FEATURES [Set transfer mode]
  133. ec 00 00 00 00 00 a0 00 02:56:50.968 IDENTIFY DEVICE
  134. ec 00 00 00 00 00 a0 00 02:56:32.191 IDENTIFY DEVICE
  135. ef 03 46 00 00 00 a0 00 02:56:32.191 SET FEATURES [Set transfer mode]
  136.  
  137. Error 3 occurred at disk power-on lifetime: 5 hours (0 days + 5 hours)
  138. When the command that caused the error occurred, the device was active or idle.
  139.  
  140. After command completion occurred, registers were:
  141. ER ST SC SN CL CH DH
  142. -- -- -- -- -- -- --
  143. 04 61 46 00 00 00 a0 Device Fault; Error: ABRT
  144.  
  145. Commands leading to the command that caused the error were:
  146. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  147. -- -- -- -- -- -- -- -- ---------------- --------------------
  148. ef 03 46 00 00 00 a0 00 02:56:32.191 SET FEATURES [Set transfer mode]
  149. ec 00 00 00 00 00 a0 00 02:56:32.190 IDENTIFY DEVICE
  150. ec 00 01 00 00 00 00 00 02:56:10.965 IDENTIFY DEVICE
  151. ec 00 00 00 00 00 a0 00 02:55:44.600 IDENTIFY DEVICE
  152. ef 03 46 00 00 00 a0 00 02:55:44.600 SET FEATURES [Set transfer mode]
  153.  
  154. Error 2 occurred at disk power-on lifetime: 5 hours (0 days + 5 hours)
  155. When the command that caused the error occurred, the device was active or idle.
  156.  
  157. After command completion occurred, registers were:
  158. ER ST SC SN CL CH DH
  159. -- -- -- -- -- -- --
  160. 04 61 46 00 00 00 a0 Device Fault; Error: ABRT
  161.  
  162. Commands leading to the command that caused the error were:
  163. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  164. -- -- -- -- -- -- -- -- ---------------- --------------------
  165. ef 03 46 00 00 00 a0 00 02:55:44.600 SET FEATURES [Set transfer mode]
  166. ec 00 00 00 00 00 a0 00 02:55:44.596 IDENTIFY DEVICE
  167. ef 03 46 00 00 00 a0 00 02:55:36.024 SET FEATURES [Set transfer mode]
  168. ec 00 00 00 00 00 a0 00 02:55:35.973 IDENTIFY DEVICE
  169.  
  170. SMART Self-test log structure revision number 1
  171. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  172. # 1 Short offline Aborted by host 10% 8600 -
  173. # 2 Short offline Completed without error 00% 8563 -
  174. # 3 Short offline Completed without error 00% 8471 -
  175. # 4 Short offline Completed without error 00% 8447 -
  176. # 5 Short offline Completed without error 00% 8423 -
  177. # 6 Short offline Completed without error 00% 8400 -
  178. # 7 Short offline Completed without error 00% 8376 -
  179. # 8 Short offline Completed without error 00% 8352 -
  180. # 9 Extended offline Completed without error 00% 8337 -
  181. #10 Short offline Completed without error 00% 8328 -
  182. #11 Short offline Completed without error 00% 8304 -
  183. #12 Short offline Completed without error 00% 8280 -
  184. #13 Short offline Completed without error 00% 8256 -
  185. #14 Short offline Completed without error 00% 8232 -
  186. #15 Short offline Completed without error 00% 8208 -
  187. #16 Short offline Completed without error 00% 8184 -
  188. #17 Extended offline Completed without error 00% 8170 -
  189. #18 Short offline Completed without error 00% 8160 -
  190. #19 Short offline Completed without error 00% 8136 -
  191. #20 Short offline Completed without error 00% 8112 -
  192. #21 Short offline Completed without error 00% 8088 -
  193.  
  194. SMART Selective self-test log data structure revision number 1
  195. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  196. 1 0 0 Not_testing
  197. 2 0 0 Not_testing
  198. 3 0 0 Not_testing
  199. 4 0 0 Not_testing
  200. 5 0 0 Not_testing
  201. Selective self-test flags (0x0):
  202. After scanning selected spans, do NOT read-scan remainder of disk.
  203. If Selective self-test is pending on power-up, resume after 0 minute delay
RAW Paste Data
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!