- geek@Kubuntu:~$ cdrecord -v dev=/dev/sr0 /home/geek/archlinux-2011.08.19-netinstall-i686.iso
- wodim: No write mode specified.
- wodim: Assuming -tao mode.
- wodim: Future versions of wodim may have different drive dependent defaults.
- TOC Type: 1 = CD-ROM
- scsidev: '/dev/sr0'
- devname: '/dev/sr0'
- scsibus: -2 target: -2 lun: -2
- Linux sg driver version: 3.5.27
- Wodim version: 1.1.11
- SCSI buffer size: 64512
- Device type : Removable CD-ROM
- Version : 5
- Response Format: 2
- Capabilities :
- Vendor_info : 'HL-DT-ST'
- Identification : 'DVDRAM GT20L '
- Revision : 'DC03'
- Device seems to be: Generic mmc2 DVD-R/DVD-RW.
- Current: 0x001A (DVD+RW)
- Profile: 0x0012 (DVD-RAM)
- Profile: 0x0011 (DVD-R sequential recording)
- Profile: 0x0015 (DVD-R/DL sequential recording)
- Profile: 0x0016 (DVD-R/DL layer jump recording)
- Profile: 0x0014 (DVD-RW sequential recording)
- Profile: 0x0013 (DVD-RW restricted overwrite)
- Profile: 0x001A (DVD+RW) (current)
- Profile: 0x001B (DVD+R)
- Profile: 0x002B (DVD+R/DL)
- Profile: 0x0010 (DVD-ROM)
- Profile: 0x0009 (CD-R)
- Profile: 0x000A (CD-RW)
- Profile: 0x0008 (CD-ROM)
- Profile: 0x0002 (Removable disk)
- Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
- Driver flags : SWABAUDIO BURNFREE
- Supported modes: PACKET SAO
- Drive buf size : 458752 = 448 KB
- Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
- communication breaks or freezes immediately after that.
- Drive DMA Speed: 15811 kB/s 89x CD 11x DVD
- FIFO size : 12582912 = 12288 KB
- Track 01: data 181 MB
- Total size: 207 MB (20:35.62) = 92672 sectors
- Lout start: 208 MB (20:37/47) = 92672 sectors
- Current Secsize: 2048
- HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
- Speed set to 5540 KB/s
- Starting to write CD/DVD at speed 4.0 in real unknown mode for single session.
- Last chance to quit, starting real write in 0 seconds. Operation starts.
- Waiting for reader process to fill input buffer ... input buffer ready.
- Performing OPC...
- Starting new track at sector: 0
- Track 02: 0 of 181 MB written.Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
- CDB: 2A 00 00 00 00 00 00 00 1F 00
- status: 0x2 (CHECK CONDITION)
- Sense Bytes: 70 00 03 00 00 00 00 0A 35 2D 03 0F 0C 00 00 00
- Sense Key: 0x3 Medium Error, Segment 0
- Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
- Sense flags: Blk 0 (not valid)
- cmd finished after 24.725s timeout 40s
- write track data: error after 0 bytes
- wodim: A write error occured.
- wodim: Please properly read the error message above.
- Writing time: 49.350s
- Average write speed 4.6x.
- Fixating...
- Errno: 5 (Input/output error), flush cache scsi sendcmd: no error
- CDB: 35 00 00 00 00 00 00 00 00 00
- status: 0x2 (CHECK CONDITION)
- Sense Bytes: 70 00 03 00 00 00 00 0A 0C 00 BB 0F A0 80 00 00
- Sense Key: 0x3 Medium Error, Segment 0
- Sense Code: 0xA0 Qual 0x80 (vendor unique sense code 0xA0) [No matching qualifier] Fru 0x0
- Sense flags: Blk 0 (not valid)
- cmd finished after 0.003s timeout 120s
- Trouble flushing the cache
- wodim: Cannot fixate disk.
- Fixating time: 0.003s
- wodim: fifo had 192 puts and 1 gets.
- wodim: fifo was 0 times empty and 0 times full, min fill was 100%.
SHARE
TWEET
c_smith cdrecord output
a guest
Jun 23rd, 2012
26
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
RAW Paste Data

