Guest User

Untitled

a guest
Feb 17th, 2015
311
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [ 0.000013] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
  2. [ 0.000033] Switching to timer-based delay loop, resolution 52ns
  3. [ 0.000249] Console: colour dummy device 80x30
  4. [ 0.000456] console [tty1] enabled
  5. [ 0.000486] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000)
  6. [ 0.000506] pid_max: default: 32768 minimum: 301
  7. [ 0.000667] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  8. [ 0.000685] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  9. [ 0.001752] CPU: Testing write buffer coherency: ok
  10. [ 0.002279] CPU0: update cpu_capacity 1024
  11. [ 0.002299] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
  12. [ 0.002312] [bcm2709_smp_prepare_cpus] enter
  13. [ 0.002400] Setting up static identity map for 0x4d8ce8 - 0x4d8d1c
  14. [ 0.027364] [bcm2709_boot_secondary] cpu:1 started (0) 17
  15. [ 0.027659] CPU1: Booted secondary processor
  16. [ 0.027666] [bcm2709_secondary_init] enter cpu:1
  17. [ 0.027711] CPU1: update cpu_capacity 1024
  18. [ 0.027719] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
  19. [ 0.033987] [bcm2709_boot_secondary] cpu:2 started (0) 18
  20. [ 0.034224] CPU2: Booted secondary processor
  21. [ 0.034230] [bcm2709_secondary_init] enter cpu:2
  22. [ 0.034258] CPU2: update cpu_capacity 1024
  23. [ 0.034265] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
  24. [ 0.037345] [bcm2709_boot_secondary] cpu:3 started (0) 18
  25. [ 0.037571] CPU3: Booted secondary processor
  26. [ 0.037577] [bcm2709_secondary_init] enter cpu:3
  27. [ 0.037606] CPU3: update cpu_capacity 1024
  28. [ 0.037614] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
  29. [ 0.037701] Brought up 4 CPUs
  30. [ 0.037733] SMP: Total of 4 processors activated (153.00 BogoMIPS).
  31. [ 0.037743] CPU: All CPU(s) started in SVC mode.
  32. [ 0.038496] devtmpfs: initialized
  33. [ 0.059977] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  34. [ 0.060944] pinctrl core: initialized pinctrl subsystem
  35. [ 0.063562] NET: Registered protocol family 16
  36. [ 0.069358] DMA: preallocated 4096 KiB pool for atomic coherent allocations
  37. [ 0.073729] cpuidle: using governor ladder
  38. [ 0.080406] cpuidle: using governor menu
  39. [ 0.080910] bcm2709.uart_clock = 3000000
  40. [ 0.083178] mailbox: Broadcom VideoCore Mailbox driver
  41. [ 0.083281] bcm2708_vcio: mailbox at f300b880
  42. [ 0.083580] bcm_power: Broadcom power driver
  43. [ 0.083596] bcm_power_open() -> 0
  44. [ 0.083606] bcm_power_request(0, 8)
  45. [ 0.584285] bcm_mailbox_read -> 00000080, 0
  46. [ 0.584298] bcm_power_request -> 0
  47. [ 0.584410] Serial: AMBA PL011 UART driver
  48. [ 0.584543] dev:f1: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev3
  49. [ 0.584966] console [ttyAMA0] enabled
  50. [ 0.629967] SCSI subsystem initialized
  51. [ 0.630409] usbcore: registered new interface driver usbfs
  52. [ 0.630504] usbcore: registered new interface driver hub
  53. [ 0.630624] usbcore: registered new device driver usb
  54. [ 0.632590] Switched to clocksource arch_sys_counter
  55. [ 0.643010] NET: Registered protocol family 2
  56. [ 0.644063] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  57. [ 0.644200] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  58. [ 0.644392] TCP: Hash tables configured (established 8192 bind 8192)
  59. [ 0.644507] TCP: reno registered
  60. [ 0.644527] UDP hash table entries: 512 (order: 2, 16384 bytes)
  61. [ 0.644588] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  62. [ 0.644911] NET: Registered protocol family 1
  63. [ 0.645339] RPC: Registered named UNIX socket transport module.
  64. [ 0.645356] RPC: Registered udp transport module.
  65. [ 0.645366] RPC: Registered tcp transport module.
  66. [ 0.645375] RPC: Registered tcp NFSv4.1 backchannel transport module.
  67. [ 0.795305] bcm2708_dma: DMA manager at f3007000
  68. [ 0.795500] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
  69. [ 0.797023] futex hash table entries: 1024 (order: 4, 65536 bytes)
  70. [ 0.811827] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  71. [ 0.814415] NFS: Registering the id_resolver key type
  72. [ 0.814503] Key type id_resolver registered
  73. [ 0.814516] Key type id_legacy registered
  74. [ 0.814552] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  75. [ 0.816849] msgmni has been set to 1218
  76. [ 0.819206] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  77. [ 0.819277] io scheduler noop registered (default)
  78. [ 0.819302] io scheduler deadline registered
  79. [ 0.819633] io scheduler cfq registered
  80. [ 0.821938] BCM2708FB: allocated DMA memory e6c00000
  81. [ 0.821978] BCM2708FB: allocated DMA channel 0 @ f3007000
  82. [ 0.835574] Console: switching to colour frame buffer device 148x39
  83. [ 0.844486] bcm2708-dmaengine bcm2708-dmaengine: Load BCM2835 DMA engine driver
  84. [ 0.844747] uart-pl011 dev:f1: no DMA platform data
  85. [ 0.844773] vc-cma: Videocore CMA driver
  86. [ 0.844784] vc-cma: vc_cma_base = 0x00000000
  87. [ 0.844794] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
  88. [ 0.844804] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
  89. [ 0.853999] brd: module loaded
  90. [ 0.854218] loop: module loaded
  91. [ 0.854737] nbd: registered device at major 43
  92. [ 0.863504] vchiq: vchiq_init_state: slot_zero = 0xa6800000, is_master = 0
  93. [ 0.864384] usbcore: registered new interface driver rtsx_usb
  94. [ 0.864413] Loading iSCSI transport class v2.0-870.
  95. [ 0.864952] iscsi: registered transport (tcp)
  96. [ 0.865474] tun: Universal TUN/TAP device driver, 1.6
  97. [ 0.865487] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  98. [ 0.865883] usbcore: registered new interface driver dm9601
  99. [ 0.866075] usbcore: registered new interface driver smsc95xx
  100. [ 0.866180] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  101. [ 1.066483] Core Release: 2.80a
  102. [ 1.066504] Setting default values for core params
  103. [ 1.066547] Finished setting default values for core params
  104. [ 1.266957] Using Buffer DMA mode
  105. [ 1.266972] Periodic Transfer Interrupt Enhancement - disabled
  106. [ 1.266982] Multiprocessor Interrupt Enhancement - disabled
  107. [ 1.266993] OTG VER PARAM: 0, OTG VER FLAG: 0
  108. [ 1.267010] Dedicated Tx FIFOs mode
  109. [ 1.267317] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xa6c14000 dma = 0xe6c14000 len=9024
  110. [ 1.267355] FIQ FSM acceleration enabled for :
  111. [ 1.267355] Non-periodic Split Transactions
  112. [ 1.267355] Periodic Split Transactions
  113. [ 1.267355] High-Speed Isochronous Endpoints
  114. [ 1.267379] dwc_otg: Microframe scheduler enabled
  115. [ 1.267442] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x8037a58c
  116. [ 1.267460] WARN::hcd_init_fiq:413: FIQ ASM at 0x8037a8fc length 36
  117. [ 1.267478] WARN::hcd_init_fiq:438: MPHI regs_base at 0xa7810000
  118. [ 1.267503] dwc_otg bcm2708_usb: DWC OTG Controller
  119. [ 1.267569] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
  120. [ 1.267614] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
  121. [ 1.267665] Init: Port Power? op_state=1
  122. [ 1.267675] Init: Power Port (0)
  123. [ 1.267910] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  124. [ 1.267929] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  125. [ 1.267944] usb usb1: Product: DWC OTG Controller
  126. [ 1.267959] usb usb1: Manufacturer: Linux 3.18.6 dwc_otg_hcd
  127. [ 1.267973] usb usb1: SerialNumber: bcm2708_usb
  128. [ 1.268860] hub 1-0:1.0: USB hub found
  129. [ 1.268917] hub 1-0:1.0: 1 port detected
  130. [ 1.269396] dwc_otg: FIQ enabled
  131. [ 1.269409] dwc_otg: NAK holdoff enabled
  132. [ 1.269418] dwc_otg: FIQ split-transaction FSM enabled
  133. [ 1.269453] Module dwc_common_port init
  134. [ 1.269718] usbcore: registered new interface driver uas
  135. [ 1.269872] usbcore: registered new interface driver usb-storage
  136. [ 1.270124] mousedev: PS/2 mouse device common for all mice
  137. [ 1.270297] i2c /dev entries driver
  138. [ 1.271129] bcm2835-cpufreq: min=600000 max=1000000
  139. [ 1.284460] sdhci: Secure Digital Host Controller Interface driver
  140. [ 1.284469] sdhci: Copyright(c) Pierre Ossman
  141. [ 1.284578] DMA channels allocated for the MMC driver
  142. [ 1.309266] Load BCM2835 MMC driver
  143. [ 1.309430] sdhci-pltfm: SDHCI platform and OF driver helper
  144. [ 1.311880] hidraw: raw HID events driver (C) Jiri Kosina
  145. [ 1.317129] usbcore: registered new interface driver usbhid
  146. [ 1.317137] usbhid: USB HID core driver
  147. [ 1.317335] TCP: cubic registered
  148. [ 1.317998] NET: Registered protocol family 10
  149. [ 1.318801] NET: Registered protocol family 17
  150. [ 1.318902] Key type dns_resolver registered
  151. [ 1.319270] Registering SWP/SWPB emulation handler
  152. [ 1.322102] console [netcon0] enabled
  153. [ 1.322112] netconsole: network logging started
  154. [ 1.324608] Freeing unused kernel memory: 2172K (80623000 - 80842000)
  155. [ 1.362645] mmc0: host does not support reading read-only switch, assuming write-enable
  156. [ 1.366789] mmc0: new high speed SDHC card at address aaaa
  157. [ 1.370546] mmcblk0: mmc0:aaaa SU08G 7.40 GiB
  158. [ 1.372192] mmcblk0: p1 p2
  159. [ 1.466061] Indeed it is in host mode hprt0 = 00021501
  160. [ 1.632745] usb 1-1: new high-speed USB device number 2 using dwc_otg
  161. [ 1.632938] Indeed it is in host mode hprt0 = 00001101
  162. [ 1.812946] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
  163. [ 1.812965] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  164. [ 1.813529] hub 1-1:1.0: USB hub found
  165. [ 1.813626] hub 1-1:1.0: 5 ports detected
  166. [ 2.092690] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  167. [ 2.186248] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  168. [ 2.186270] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  169. [ 2.189124] smsc95xx v1.0.4
  170. [ 2.233027] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:51:43:f6
  171. [ 2.312689] usb 1-1.3: new high-speed USB device number 4 using dwc_otg
  172. [ 2.409794] usb 1-1.3: New USB device found, idVendor=1b80, idProduct=e409
  173. [ 2.409821] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  174. [ 2.409836] usb 1-1.3: Product: DVB-T TV Stick
  175. [ 2.409851] usb 1-1.3: Manufacturer: ITE Technologies, Inc.
  176. [ 2.609388] usb 1-1.5: new full-speed USB device number 5 using dwc_otg
  177. [ 2.713568] usb 1-1.5: New USB device found, idVendor=046e, idProduct=5577
  178. [ 2.713594] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  179. [ 2.713611] usb 1-1.5: Product: USB Multimedia Cordless Keyboard
  180. [ 2.713625] usb 1-1.5: Manufacturer: BTC
  181. [ 2.721122] input: BTC USB Multimedia Cordless Keyboard as /devices/platform/bcm2708_usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:046E:5577.0001/input/input0
  182. [ 2.721585] topseed 0003:046E:5577.0001: input,hidraw0: USB HID v1.11 Keyboard [BTC USB Multimedia Cordless Keyboard] on usb-bcm2708_usb-1.5/input0
  183. [ 2.730205] input: BTC USB Multimedia Cordless Keyboard as /devices/platform/bcm2708_usb/usb1/1-1/1-1.5/1-1.5:1.1/0003:046E:5577.0002/input/input1
  184. [ 2.731219] topseed 0003:046E:5577.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [BTC USB Multimedia Cordless Keyboard] on usb-bcm2708_usb-1.5/input1
  185. [ 3.243761] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
  186. [ 3.244282] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
  187. [ 3.275171] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  188. [ 3.762110] random: nonblocking pool is initialized
  189. [ 4.562724] bcm2708_rng_init=a796a000
  190. [ 4.998837] systemd-journald[174]: Received request to flush runtime journal from PID 1
  191. [ 6.086563] Console: switching to colour dummy device 80x30
  192. [ 6.490441] input: eventlircd as /devices/virtual/input/input3
  193. [ 6.709628] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  194. [ 6.709924] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  195. [ 8.226349] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  196. [ 8.229559] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
  197. [ 8.322961] usb 1-1.3: dvb_usb_v2: 2nd usb_bulk_msg() failed=-110
  198. [ 8.323009] dvb_usb_af9035: probe of 1-1.3:1.0 failed with error -110
  199. [ 8.323138] usbcore: registered new interface driver dvb_usb_af9035
RAW Paste Data