Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- root@ubuntu:/home/ubuntu# fsck.ext3 /dev/LVG/ROOT_VOL
- e2fsck 1.41.14 (22-Dec-2010)
- fsck.ext3: Superblock invalid, trying backup blocks...
- fsck.ext3: Bad magic number in super-block while trying to open /dev/LVG/ROOT_VOL
- The superblock could not be read or does not describe a correct ext2
- filesystem. If the device is valid and it really contains an ext2
- filesystem (and not swap or ufs or something else), then the superblock
- is corrupt, and you might try running e2fsck with an alternate superblock:
- e2fsck -b 8193 <device>
- root@ubuntu:/home/ubuntu# dmesg
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.0.0-12-generic (buildd@vernadsky) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #20-Ubuntu SMP Fri Oct 7 14:50:42 UTC 2011 (Ubuntu 3.0.0-12.20-generic 3.0.4)
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] NSC Geode by NSC
- [ 0.000000] Cyrix CyrixInstead
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] Transmeta GenuineTMx86
- [ 0.000000] Transmeta TransmetaCPU
- [ 0.000000] UMC UMC UMC UMC
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
- [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 00000000efff0000 (usable)
- [ 0.000000] BIOS-e820: 00000000efff0000 - 00000000efff3000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000efff3000 - 00000000f0000000 (ACPI data)
- [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
- [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
- [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
- [ 0.000000] DMI 2.3 present.
- [ 0.000000] DMI: MS-9249 /MS-9249, BIOS 6.00 PG 02/05/2005
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- [ 0.000000] last_pfn = 0xefff0 max_arch_pfn = 0x100000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-EFFFF uncachable
- [ 0.000000] F0000-FFFFF write-through
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000 mask F80000000 write-back
- [ 0.000000] 1 base 080000000 mask FC0000000 write-back
- [ 0.000000] 2 base 0C0000000 mask FE0000000 write-back
- [ 0.000000] 3 base 0E0000000 mask FF0000000 write-back
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] found SMP MP-table at [c00f5530] f5530
- [ 0.000000] initial memory mapped : 0 - 01c00000
- [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
- [ 0.000000] 0000000000 - 0000400000 page 4k
- [ 0.000000] 0000400000 - 0037400000 page 2M
- [ 0.000000] 0037400000 - 00377fe000 page 4k
- [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
- [ 0.000000] RAMDISK: 7f1df000 - 80000000
- [ 0.000000] Allocated new RAMDISK: 369dd000 - 377fd07f
- [ 0.000000] Move RAMDISK from 000000007f1df000 - 000000007ffff07e to 369dd000 - 377fd07e
- [ 0.000000] ACPI: RSDP 000f72c0 00014 (v00 IntelR)
- [ 0.000000] ACPI: RSDT efff3000 0002C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
- [ 0.000000] ACPI: FACP efff3040 00074 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
- [ 0.000000] ACPI: DSDT efff30c0 03B97 (v01 INTELR AWRDACPI 00001000 MSFT 0100000E)
- [ 0.000000] ACPI: FACS efff0000 00040
- [ 0.000000] ACPI: APIC efff6c80 00074 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] 2951MB HIGHMEM available.
- [ 0.000000] 887MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 377fe000
- [ 0.000000] low ram: 0 - 377fe000
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] Normal 0x00001000 -> 0x000377fe
- [ 0.000000] HighMem 0x000377fe -> 0x000efff0
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[2] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009f
- [ 0.000000] 0: 0x00000100 -> 0x000efff0
- [ 0.000000] On node 0 totalpages: 982911
- [ 0.000000] free_area_init_node: node 0, pgdat c17b11c0, node_mem_map f4bdc200
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
- [ 0.000000] Normal zone: 1744 pages used for memmap
- [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 5904 pages used for memmap
- [ 0.000000] HighMem zone: 749794 pages, LIFO batch:31
- [ 0.000000] Using APIC driver default
- [ 0.000000] ACPI: PM-Timer IO Port: 0x408
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[24])
- [ 0.000000] IOAPIC[1]: apic_id 3, version 32, address 0xfec10000, GSI 24-47
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 64
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
- [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
- [ 0.000000] Allocating PCI resources starting at f0000000 (gap: f0000000:ec00000)
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 12 pages/cpu @f4400000 s26240 r0 d22912 u2097152
- [ 0.000000] pcpu-alloc: s26240 r0 d22912 u2097152 alloc=1*4194304
- [ 0.000000] pcpu-alloc: [0] 0 1
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 975231
- [ 0.000000] Kernel command line: noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Initializing CPU#0
- [ 0.000000] allocated 15728128 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Initializing HighMem for node 0 (000377fe:000efff0)
- [ 0.000000] Memory: 3860592k/3932096k available (5329k kernel code, 71052k reserved, 2589k data, 696k init, 3022792k highmem)
- [ 0.000000] virtual kernel memory layout:
- [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
- [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
- [ 0.000000] .init : 0xc17bc000 - 0xc186a000 ( 696 kB)
- [ 0.000000] .data : 0xc1534784 - 0xc17bbd80 (2589 kB)
- [ 0.000000] .text : 0xc1000000 - 0xc1534784 (5329 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] NR_IRQS:2304 nr_irqs:512 16
- [ 0.000000] CPU 0 irqstacks, hard=f3008000 soft=f300a000
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 3191.990 MHz processor.
- [ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6383.98 BogoMIPS (lpj=12767960)
- [ 0.004010] pid_max: default: 32768 minimum: 301
- [ 0.004039] Security Framework initialized
- [ 0.004066] AppArmor: AppArmor initialized
- [ 0.004069] Yama: becoming mindful.
- [ 0.004146] Mount-cache hash table entries: 512
- [ 0.004345] Initializing cgroup subsys cpuacct
- [ 0.004353] Initializing cgroup subsys memory
- [ 0.004364] Initializing cgroup subsys devices
- [ 0.004367] Initializing cgroup subsys freezer
- [ 0.004370] Initializing cgroup subsys net_cls
- [ 0.004373] Initializing cgroup subsys blkio
- [ 0.004384] Initializing cgroup subsys perf_event
- [ 0.004432] CPU: Physical Processor ID: 0
- [ 0.004435] CPU: Processor Core ID: 0
- [ 0.004439] mce: CPU supports 4 MCE banks
- [ 0.004452] CPU0: Thermal monitoring enabled (TM1)
- [ 0.004458] using mwait in idle threads.
- [ 0.007251] ACPI: Core revision 20110413
- [ 0.011919] ftrace: allocating 24885 entries in 49 pages
- [ 0.016077] Enabling APIC mode: Flat. Using 2 I/O APICs
- [ 0.016451] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.056179] CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 04
- [ 0.060003] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
- [ 0.060003] ... version: 0
- [ 0.060003] ... bit width: 40
- [ 0.060003] ... generic registers: 18
- [ 0.060003] ... value mask: 000000ffffffffff
- [ 0.060003] ... max period: 0000007fffffffff
- [ 0.060003] ... fixed-purpose events: 0
- [ 0.060003] ... event mask: 000000000003ffff
- [ 0.060003] CPU 1 irqstacks, hard=f30b0000 soft=f30b2000
- [ 0.060003] Booting Node 0, Processors #1 Ok.
- [ 0.060003] smpboot cpu 1: start_ip = 9b000
- [ 0.008000] Initializing CPU#1
- [ 0.148031] Brought up 2 CPUs
- [ 0.148037] Total of 2 processors activated (12768.33 BogoMIPS).
- [ 0.148705] devtmpfs: initialized
- [ 0.148705] PM: Registering ACPI NVS region at efff0000 (12288 bytes)
- [ 0.152159] print_constraints: dummy:
- [ 0.152185] Time: 0:24:27 Date: 01/18/12
- [ 0.152238] NET: Registered protocol family 16
- [ 0.152253] Trying to unpack rootfs image as initramfs...
- [ 0.152488] EISA bus registered
- [ 0.152504] ACPI: bus type pci registered
- [ 0.153966] PCI: PCI BIOS revision 2.10 entry at 0xfaf40, last bus=3
- [ 0.153970] PCI: Using configuration type 1 for base access
- [ 0.156190] bio: create slab <bio-0> at 0
- [ 0.157919] ACPI: EC: Look up EC in DSDT
- [ 0.163936] ACPI: Interpreter enabled
- [ 0.163943] ACPI: (supports S0 S1 S4 S5)
- [ 0.163982] ACPI: Using IOAPIC for interrupt routing
- [ 0.170809] ACPI: No dock devices found.
- [ 0.170814] HEST: Table not found.
- [ 0.170820] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
- [ 0.170922] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.171149] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
- [ 0.171156] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
- [ 0.171162] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
- [ 0.171168] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
- [ 0.171174] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored)
- [ 0.171195] pci 0000:00:00.0: [8086:2578] type 0 class 0x000600
- [ 0.171202] pci 0000:00:00.0: Enabling MCH 'Overflow' Device
- [ 0.171216] pci 0000:00:00.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
- [ 0.171283] pci 0000:00:03.0: [8086:257b] type 1 class 0x000604
- [ 0.171332] pci 0000:00:06.0: [8086:257e] type 0 class 0x000880
- [ 0.171347] pci 0000:00:06.0: reg 10: [mem 0xfecf0000-0xfecf0fff]
- [ 0.171446] pci 0000:00:1c.0: [8086:25ae] type 1 class 0x000604
- [ 0.171518] pci 0000:00:1d.0: [8086:25a9] type 0 class 0x000c03
- [ 0.171574] pci 0000:00:1d.0: reg 20: [io 0xc400-0xc41f]
- [ 0.171617] pci 0000:00:1d.1: [8086:25aa] type 0 class 0x000c03
- [ 0.171673] pci 0000:00:1d.1: reg 20: [io 0xc000-0xc01f]
- [ 0.171719] pci 0000:00:1d.4: [8086:25ab] type 0 class 0x000880
- [ 0.171737] pci 0000:00:1d.4: reg 10: [mem 0xfb101000-0xfb10100f]
- [ 0.171820] pci 0000:00:1d.5: [8086:25ac] type 0 class 0x000800
- [ 0.171931] pci 0000:00:1d.7: [8086:25ad] type 0 class 0x000c03
- [ 0.171958] pci 0000:00:1d.7: reg 10: [mem 0xfb100000-0xfb1003ff]
- [ 0.172068] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
- [ 0.172076] pci 0000:00:1d.7: PME# disabled
- [ 0.172097] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
- [ 0.172152] pci 0000:00:1f.0: [8086:25a1] type 0 class 0x000601
- [ 0.172250] pci 0000:00:1f.1: [8086:25a2] type 0 class 0x000101
- [ 0.172270] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
- [ 0.172284] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
- [ 0.172298] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
- [ 0.172312] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
- [ 0.172326] pci 0000:00:1f.1: reg 20: [io 0xf000-0xf00f]
- [ 0.172340] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
- [ 0.172379] pci 0000:00:1f.2: [8086:25a3] type 0 class 0x000101
- [ 0.172397] pci 0000:00:1f.2: reg 10: [io 0xc800-0xc807]
- [ 0.172410] pci 0000:00:1f.2: reg 14: [io 0xcc00-0xcc03]
- [ 0.172423] pci 0000:00:1f.2: reg 18: [io 0xd000-0xd007]
- [ 0.172436] pci 0000:00:1f.2: reg 1c: [io 0xd400-0xd403]
- [ 0.172449] pci 0000:00:1f.2: reg 20: [io 0xd800-0xd80f]
- [ 0.172490] pci 0000:00:1f.3: [8086:25a4] type 0 class 0x000c05
- [ 0.172545] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
- [ 0.172609] pci 0000:01:01.0: [8086:1075] type 0 class 0x000200
- [ 0.172630] pci 0000:01:01.0: reg 10: [mem 0xfb000000-0xfb01ffff]
- [ 0.172650] pci 0000:01:01.0: reg 18: [io 0xa000-0xa01f]
- [ 0.172703] pci 0000:01:01.0: PME# supported from D0 D3hot D3cold
- [ 0.172710] pci 0000:01:01.0: PME# disabled
- [ 0.172757] pci 0000:00:03.0: PCI bridge to [bus 01-01]
- [ 0.172765] pci 0000:00:03.0: bridge window [io 0xa000-0xafff]
- [ 0.172772] pci 0000:00:03.0: bridge window [mem 0xfb000000-0xfb0fffff]
- [ 0.172779] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- [ 0.172862] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
- [ 0.172869] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
- [ 0.172877] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
- [ 0.172887] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- [ 0.172936] pci 0000:03:0a.0: [8086:1076] type 0 class 0x000200
- [ 0.172962] pci 0000:03:0a.0: reg 10: [mem 0xfa000000-0xfa01ffff]
- [ 0.172985] pci 0000:03:0a.0: reg 18: [io 0xb000-0xb03f]
- [ 0.173050] pci 0000:03:0a.0: PME# supported from D0 D3hot D3cold
- [ 0.173057] pci 0000:03:0a.0: PME# disabled
- [ 0.173085] pci 0000:03:0c.0: [1002:4752] type 0 class 0x000300
- [ 0.173109] pci 0000:03:0c.0: reg 10: [mem 0xf8000000-0xf8ffffff]
- [ 0.173123] pci 0000:03:0c.0: reg 14: [io 0xb400-0xb4ff]
- [ 0.173138] pci 0000:03:0c.0: reg 18: [mem 0xfa020000-0xfa020fff]
- [ 0.173180] pci 0000:03:0c.0: reg 30: [mem 0x00000000-0x0001ffff pref]
- [ 0.173205] pci 0000:03:0c.0: supports D1 D2
- [ 0.173243] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
- [ 0.173251] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
- [ 0.173259] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfaffffff]
- [ 0.173267] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- [ 0.173273] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
- [ 0.173278] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
- [ 0.173300] pci_bus 0000:00: on NUMA node 0
- [ 0.173307] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.173490] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
- [ 0.173718] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HRB_._PRT]
- [ 0.173872] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
- [ 0.184565] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
- [ 0.184669] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
- [ 0.184770] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
- [ 0.184870] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12 14 15)
- [ 0.184971] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
- [ 0.185073] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
- [ 0.185176] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 *12 14 15)
- [ 0.185277] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 *10 11 12 14 15)
- [ 0.185484] vgaarb: device added: PCI:0000:03:0c.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.185490] vgaarb: loaded
- [ 0.185493] vgaarb: bridge control possible 0000:03:0c.0
- [ 0.185971] SCSI subsystem initialized
- [ 0.186072] libata version 3.00 loaded.
- [ 0.186171] usbcore: registered new interface driver usbfs
- [ 0.186198] usbcore: registered new interface driver hub
- [ 0.186256] usbcore: registered new device driver usb
- [ 0.186429] PCI: Using ACPI for IRQ routing
- [ 0.186437] PCI: pci_cache_line_size set to 64 bytes
- [ 0.186545] reserve RAM buffer: 000000000009f800 - 000000000009ffff
- [ 0.186550] reserve RAM buffer: 00000000efff0000 - 00000000efffffff
- [ 0.186740] NetLabel: Initializing
- [ 0.186745] NetLabel: domain hash size = 128
- [ 0.186748] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.186773] NetLabel: unlabeled traffic allowed by default
- [ 0.202121] AppArmor: AppArmor Filesystem Enabled
- [ 0.202177] pnp: PnP ACPI init
- [ 0.202207] ACPI: bus type pnp registered
- [ 0.202376] pnp 00:00: [bus 00-ff]
- [ 0.202382] pnp 00:00: [io 0x0cf8-0x0cff]
- [ 0.202387] pnp 00:00: [io 0x0000-0x0cf7 window]
- [ 0.202393] pnp 00:00: [io 0x0d00-0xffff window]
- [ 0.202398] pnp 00:00: [mem 0x000a0000-0x000bffff window]
- [ 0.202403] pnp 00:00: [mem 0x000c0000-0x000dffff window]
- [ 0.202408] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
- [ 0.202508] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
- [ 0.202577] pnp 00:01: [io 0x0010-0x001f]
- [ 0.202582] pnp 00:01: [io 0x0022-0x003f]
- [ 0.202587] pnp 00:01: [io 0x0044-0x005f]
- [ 0.202591] pnp 00:01: [io 0x0062-0x0063]
- [ 0.202596] pnp 00:01: [io 0x0065-0x006f]
- [ 0.202600] pnp 00:01: [io 0x0074-0x007f]
- [ 0.202604] pnp 00:01: [io 0x0091-0x0093]
- [ 0.202609] pnp 00:01: [io 0x00a2-0x00bf]
- [ 0.202613] pnp 00:01: [io 0x00e0-0x00ef]
- [ 0.202617] pnp 00:01: [io 0x04d0-0x04d1]
- [ 0.202622] pnp 00:01: [io 0x0800-0x087f]
- [ 0.202723] system 00:01: [io 0x04d0-0x04d1] has been reserved
- [ 0.202730] system 00:01: [io 0x0800-0x087f] has been reserved
- [ 0.202738] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.202764] pnp 00:02: [dma 4]
- [ 0.202769] pnp 00:02: [io 0x0000-0x000f]
- [ 0.202774] pnp 00:02: [io 0x0080-0x0090]
- [ 0.202782] pnp 00:02: [io 0x0094-0x009f]
- [ 0.202787] pnp 00:02: [io 0x00c0-0x00df]
- [ 0.202837] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.202862] pnp 00:03: [io 0x0070-0x0073]
- [ 0.202882] pnp 00:03: [irq 8]
- [ 0.202943] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.202962] pnp 00:04: [io 0x0061]
- [ 0.203016] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
- [ 0.203036] pnp 00:05: [io 0x00f0-0x00ff]
- [ 0.203045] pnp 00:05: [irq 13]
- [ 0.203100] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.203216] pnp 00:06: [io 0x03f2-0x03f5]
- [ 0.203221] pnp 00:06: [io 0x03f7]
- [ 0.203230] pnp 00:06: [irq 6]
- [ 0.203234] pnp 00:06: [dma 2]
- [ 0.203314] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
- [ 0.203533] pnp 00:07: [io 0x03f8-0x03ff]
- [ 0.203542] pnp 00:07: [irq 4]
- [ 0.203639] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
- [ 0.203873] pnp 00:08: [io 0x02f8-0x02ff]
- [ 0.203882] pnp 00:08: [irq 3]
- [ 0.203980] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
- [ 0.204308] pnp 00:09: [io 0x0378-0x037f]
- [ 0.204318] pnp 00:09: [irq 7]
- [ 0.204417] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
- [ 0.204599] pnp 00:0a: [io 0x0400-0x04bf]
- [ 0.204692] system 00:0a: [io 0x0400-0x04bf] has been reserved
- [ 0.204700] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.204745] pnp 00:0b: [mem 0xffb80000-0xffbfffff]
- [ 0.204806] pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active)
- [ 0.205397] pnp 00:0c: [mem 0x000cd000-0x000cffff]
- [ 0.205403] pnp 00:0c: [mem 0x000f0000-0x000f7fff]
- [ 0.205408] pnp 00:0c: [mem 0x000f8000-0x000fbfff]
- [ 0.205413] pnp 00:0c: [mem 0x000fc000-0x000fffff]
- [ 0.205417] pnp 00:0c: [mem 0xefff0000-0xefffffff]
- [ 0.205422] pnp 00:0c: [mem 0x00000000-0x0009ffff]
- [ 0.205427] pnp 00:0c: [mem 0x00100000-0xeffeffff]
- [ 0.205431] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
- [ 0.205436] pnp 00:0c: [mem 0xfec01000-0xfed8ffff]
- [ 0.205440] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
- [ 0.205445] pnp 00:0c: [mem 0xffb00000-0xffb7ffff]
- [ 0.205450] pnp 00:0c: [mem 0xfff00000-0xffffffff]
- [ 0.205454] pnp 00:0c: [mem 0x000e0000-0x000effff]
- [ 0.205586] system 00:0c: [mem 0x000cd000-0x000cffff] has been reserved
- [ 0.205593] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved
- [ 0.205599] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved
- [ 0.205605] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved
- [ 0.205611] system 00:0c: [mem 0xefff0000-0xefffffff] could not be reserved
- [ 0.205617] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
- [ 0.205623] system 00:0c: [mem 0x00100000-0xeffeffff] could not be reserved
- [ 0.205630] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 0.205636] system 00:0c: [mem 0xfec01000-0xfed8ffff] could not be reserved
- [ 0.205642] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
- [ 0.205648] system 00:0c: [mem 0xffb00000-0xffb7ffff] has been reserved
- [ 0.205654] system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved
- [ 0.205660] system 00:0c: [mem 0x000e0000-0x000effff] has been reserved
- [ 0.205667] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.205685] pnp: PnP ACPI: found 13 devices
- [ 0.205689] ACPI: ACPI bus type pnp unregistered
- [ 0.205695] PnPBIOS: Disabled by ACPI PNP
- [ 0.243785] Switching to clocksource acpi_pm
- [ 4.674181] PCI: max bus depth: 1 pci_try_num: 2
- [ 4.674227] pci 0000:00:1e.0: BAR 15: assigned [mem 0xfb200000-0xfb2fffff pref]
- [ 4.674236] pci 0000:00:1f.1: BAR 5: assigned [mem 0xfb100400-0xfb1007ff]
- [ 4.674247] pci 0000:00:1f.1: BAR 5: set to [mem 0xfb100400-0xfb1007ff] (PCI address [0xfb100400-0xfb1007ff])
- [ 4.674254] pci 0000:00:03.0: PCI bridge to [bus 01-01]
- [ 4.674261] pci 0000:00:03.0: bridge window [io 0xa000-0xafff]
- [ 4.674269] pci 0000:00:03.0: bridge window [mem 0xfb000000-0xfb0fffff]
- [ 4.674276] pci 0000:00:03.0: bridge window [mem pref disabled]
- [ 4.674286] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
- [ 4.674290] pci 0000:00:1c.0: bridge window [io disabled]
- [ 4.674298] pci 0000:00:1c.0: bridge window [mem disabled]
- [ 4.674305] pci 0000:00:1c.0: bridge window [mem pref disabled]
- [ 4.674318] pci 0000:03:0c.0: BAR 6: assigned [mem 0xfb200000-0xfb21ffff pref]
- [ 4.674324] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
- [ 4.674331] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
- [ 4.674340] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfaffffff]
- [ 4.674348] pci 0000:00:1e.0: bridge window [mem 0xfb200000-0xfb2fffff pref]
- [ 4.674389] pci 0000:00:1e.0: setting latency timer to 64
- [ 4.674399] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
- [ 4.674405] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
- [ 4.674410] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
- [ 4.674416] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfb0fffff]
- [ 4.674421] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
- [ 4.674426] pci_bus 0000:03: resource 1 [mem 0xf8000000-0xfaffffff]
- [ 4.674432] pci_bus 0000:03: resource 2 [mem 0xfb200000-0xfb2fffff pref]
- [ 4.674437] pci_bus 0000:03: resource 4 [io 0x0000-0xffff]
- [ 4.674442] pci_bus 0000:03: resource 5 [mem 0x00000000-0xffffffff]
- [ 4.674538] NET: Registered protocol family 2
- [ 4.674703] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 4.675282] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 4.675282] Switched to NOHz mode on CPU #0
- [ 4.674617] Switched to NOHz mode on CPU #1
- [ 4.675282] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 4.675282] TCP: Hash tables configured (established 131072 bind 65536)
- [ 4.675282] TCP reno registered
- [ 4.675282] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 4.675282] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 4.675555] NET: Registered protocol family 1
- [ 4.675651] pci 0000:00:1d.5: disabled boot interrupts on device [8086:25ac]
- [ 4.675727] PCI: CLS mismatch (64 != 32), using 64 bytes
- [ 4.675741] pci 0000:03:0c.0: Boot video device
- [ 4.676471] audit: initializing netlink socket (disabled)
- [ 4.676498] type=2000 audit(1326846271.672:1): initialized
- [ 4.718294] highmem bounce pool size: 64 pages
- [ 4.718306] HugeTLB registered 4 MB page size, pre-allocated 0 pages
- [ 4.747643] VFS: Disk quotas dquot_6.5.2
- [ 4.747799] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 4.749449] fuse init (API version 7.16)
- [ 4.749689] msgmni has been set to 1636
- [ 4.750553] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 4.750620] io scheduler noop registered
- [ 4.750625] io scheduler deadline registered
- [ 4.750660] io scheduler cfq registered (default)
- [ 4.750964] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 4.751023] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 4.751332] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
- [ 4.751343] ACPI: Power Button [PWRB]
- [ 4.751468] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- [ 4.751477] ACPI: Power Button [PWRF]
- [ 4.751598] ACPI: Fan [FAN] (on)
- [ 4.751616] ACPI: acpi_idle registered with cpuidle
- [ 4.754670] thermal LNXTHERM:00: registered as thermal_zone0
- [ 4.754676] ACPI: Thermal Zone [THRM] (40 C)
- [ 4.754750] ERST: Table is not found!
- [ 4.755046] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
- [ 4.775572] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 4.775651] isapnp: Scanning for PnP cards...
- [ 5.129972] isapnp: No Plug & Play device found
- [ 5.676038] Refined TSC clocksource calibration: 3191.999 MHz.
- [ 5.676047] Switching to clocksource tsc
- [ 6.316437] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- [ 6.316993] Freeing initrd memory: 14468k freed
- [ 6.364625] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 6.385031] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- [ 6.385360] Linux agpgart interface v0.103
- [ 6.385574] agpgart-intel 0000:00:00.0: Intel i875 Chipset
- [ 6.390398] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
- [ 6.392178] brd: module loaded
- [ 6.393022] loop: module loaded
- [ 6.393227] ata_piix 0000:00:1f.1: version 2.13
- [ 6.393256] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 6.393309] ata_piix 0000:00:1f.1: setting latency timer to 64
- [ 6.393765] scsi0 : ata_piix
- [ 6.393906] scsi1 : ata_piix
- [ 6.394575] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
- [ 6.394579] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
- [ 6.394623] ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 6.394634] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
- [ 6.394703] ata_piix 0000:00:1f.2: setting latency timer to 64
- [ 6.395080] scsi2 : ata_piix
- [ 6.395186] scsi3 : ata_piix
- [ 6.395840] ata3: SATA max UDMA/133 cmd 0xc800 ctl 0xcc00 bmdma 0xd800 irq 18
- [ 6.395845] ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xd400 bmdma 0xd808 irq 18
- [ 6.396545] Fixed MDIO Bus: probed
- [ 6.396584] PPP generic driver version 2.4.2
- [ 6.396665] tun: Universal TUN/TAP device driver, 1.6
- [ 6.396668] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 6.396795] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 6.396830] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
- [ 6.396850] ehci_hcd 0000:00:1d.7: setting latency timer to 64
- [ 6.396855] ehci_hcd 0000:00:1d.7: EHCI Host Controller
- [ 6.396907] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
- [ 6.400829] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
- [ 6.400849] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfb100000
- [ 6.416014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- [ 6.416199] hub 1-0:1.0: USB hub found
- [ 6.416205] hub 1-0:1.0: 4 ports detected
- [ 6.416307] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 6.416327] uhci_hcd: USB Universal Host Controller Interface driver
- [ 6.416378] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 6.416387] uhci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 6.416392] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [ 6.416442] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
- [ 6.416477] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000c400
- [ 6.416645] hub 2-0:1.0: USB hub found
- [ 6.416651] hub 2-0:1.0: 2 ports detected
- [ 6.416740] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 6.416749] uhci_hcd 0000:00:1d.1: setting latency timer to 64
- [ 6.416754] uhci_hcd 0000:00:1d.1: UHCI Host Controller
- [ 6.416805] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
- [ 6.416839] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c000
- [ 6.417003] hub 3-0:1.0: USB hub found
- [ 6.417009] hub 3-0:1.0: 2 ports detected
- [ 6.417171] i8042: PNP: No PS/2 controller found. Probing ports directly.
- [ 6.556614] ata2.00: ATAPI: SR244W, T01A, max UDMA/33
- [ 6.564281] ata1.00: CFA: 64MB CHH, Rev 1.00, max PIO2
- [ 6.564287] ata1.00: 125184 sectors, multi 0: LBA
- [ 6.572286] ata1.00: configured for PIO2
- [ 6.572320] ata2.00: configured for UDMA/33
- [ 6.572496] scsi 0:0:0:0: Direct-Access ATA 64MB CHH Rev PQ: 0 ANSI: 5
- [ 6.572733] sd 0:0:0:0: [sda] 125184 512-byte logical blocks: (64.0 MB/61.1 MiB)
- [ 6.572756] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 6.572853] sd 0:0:0:0: [sda] Write Protect is off
- [ 6.572860] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 6.572920] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
- [ 6.573802] ata4.00: ATA-7: WDC WD5000KS-00MNB0, 06.02E06, max UDMA/133
- [ 6.573806] ata4.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 0/32)
- [ 6.574892] sda: sda1
- [ 6.575325] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 6.580654] ata4.00: configured for UDMA/133
- [ 6.580789] scsi 1:0:0:0: CD-ROM MITSUMI CD-ROM SR244W T01A PQ: 0 ANSI: 5
- [ 6.589927] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
- [ 6.589931] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 6.590075] sr 1:0:0:0: Attached scsi CD-ROM sr0
- [ 6.590157] sr 1:0:0:0: Attached scsi generic sg1 type 5
- [ 6.668401] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 6.668522] mousedev: PS/2 mouse device common for all mice
- [ 6.668671] rtc_cmos 00:03: RTC can wake from S4
- [ 6.668780] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
- [ 6.668803] rtc0: alarms up to one month, 242 bytes nvram
- [ 6.668958] device-mapper: uevent: version 1.0.3
- [ 6.669070] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
- [ 6.669119] EISA: Probing bus 0 at eisa.0
- [ 6.669161] EISA: Detected 0 cards.
- [ 6.669174] cpufreq-nforce2: No nForce2 chipset.
- [ 6.669178] cpuidle: using governor ladder
- [ 6.669181] cpuidle: using governor menu
- [ 6.669183] EFI Variables Facility v0.08 2004-May-17
- [ 6.669611] TCP cubic registered
- [ 6.669807] NET: Registered protocol family 10
- [ 6.670744] NET: Registered protocol family 17
- [ 6.670773] Registering the dns_resolver key type
- [ 6.670806] Using IPI No-Shortcut mode
- [ 6.670928] PM: Hibernation image not present or could not be loaded.
- [ 6.670945] registered taskstats version 1
- [ 6.673477] ata3.00: ATA-6: ST380013AS, 3.18, max UDMA/133
- [ 6.673484] ata3.00: 156301488 sectors, multi 1: LBA48
- [ 6.688389] ata3.00: configured for UDMA/133
- [ 6.688594] scsi 2:0:0:0: Direct-Access ATA ST380013AS 3.18 PQ: 0 ANSI: 5
- [ 6.688963] sd 2:0:0:0: Attached scsi generic sg2 type 0
- [ 6.689120] sd 2:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
- [ 6.689199] scsi 3:0:0:0: Direct-Access ATA WDC WD5000KS-00M 06.0 PQ: 0 ANSI: 5
- [ 6.689244] sd 2:0:0:0: [sdb] Write Protect is off
- [ 6.689251] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 6.689300] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 6.689504] sd 3:0:0:0: Attached scsi generic sg3 type 0
- [ 6.689547] sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
- [ 6.689664] sd 3:0:0:0: [sdc] Write Protect is off
- [ 6.689672] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
- [ 6.689729] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 6.692626] Magic number: 12:690:405
- [ 6.692729] rtc_cmos 00:03: setting system clock to 2012-01-18 00:24:34 UTC (1326846274)
- [ 6.692756] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 6.692759] EDD information not available.
- [ 6.697990] sdc: sdc1
- [ 6.698398] sd 3:0:0:0: [sdc] Attached SCSI disk
- [ 6.707884] sdb: sdb1
- [ 6.708263] sd 2:0:0:0: [sdb] Attached SCSI disk
- [ 6.708318] Freeing unused kernel memory: 696k freed
- [ 6.708906] Write protecting the kernel text: 5332k
- [ 6.708971] Write protecting the kernel read-only data: 2188k
- [ 6.728077] usb 1-3: new high speed USB device number 2 using ehci_hcd
- [ 6.742305] udevd[96]: starting version 173
- [ 6.908723] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
- [ 6.908730] e1000: Copyright (c) 1999-2006 Intel Corporation.
- [ 6.908805] e1000 0000:01:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 6.908821] e1000 0000:01:01.0: setting latency timer to 64
- [ 6.951951] Floppy drive(s): fd0 is unknown type 15 (usb?), fd1 is unknown type 15 (usb?)
- [ 6.971259] FDC 0 is a National Semiconductor PC87306
- [ 7.098700] usbcore: registered new interface driver uas
- [ 7.100481] Initializing USB Mass Storage driver...
- [ 7.104564] scsi4 : usb-storage 1-3:1.0
- [ 7.105089] usbcore: registered new interface driver usb-storage
- [ 7.105094] USB Mass Storage support registered.
- [ 7.371051] e1000 0000:01:01.0: eth0: (PCI:33MHz:32-bit) 00:11:09:a5:73:41
- [ 7.371065] e1000 0000:01:01.0: eth0: Intel(R) PRO/1000 Network Connection
- [ 7.371245] e1000 0000:03:0a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 7.826802] e1000 0000:03:0a.0: eth1: (PCI:33MHz:32-bit) 00:11:09:a5:73:40
- [ 7.826809] e1000 0000:03:0a.0: eth1: Intel(R) PRO/1000 Network Connection
- [ 8.085830] Btrfs loaded
- [ 8.095699] xor: automatically using best checksumming function: pIII_sse
- [ 8.104656] scsi 4:0:0:0: Direct-Access SanDisk Cruzer 8.02 PQ: 0 ANSI: 0 CCS
- [ 8.112010] pIII_sse : 4810.000 MB/sec
- [ 8.112015] xor: using function: pIII_sse (4810.000 MB/sec)
- [ 8.113079] device-mapper: dm-raid45: initialized v0.2594b
- [ 8.228385] sd 4:0:0:0: Attached scsi generic sg4 type 0
- [ 8.229392] sd 4:0:0:0: [sdd] 7856127 512-byte logical blocks: (4.02 GB/3.74 GiB)
- [ 8.229938] sd 4:0:0:0: [sdd] Write Protect is off
- [ 8.229944] sd 4:0:0:0: [sdd] Mode Sense: 45 00 00 08
- [ 8.230633] sd 4:0:0:0: [sdd] No Caching mode page present
- [ 8.230638] sd 4:0:0:0: [sdd] Assuming drive cache: write through
- [ 8.232986] sd 4:0:0:0: [sdd] No Caching mode page present
- [ 8.232993] sd 4:0:0:0: [sdd] Assuming drive cache: write through
- [ 8.236218] sdd: sdd1
- [ 8.239198] sd 4:0:0:0: [sdd] No Caching mode page present
- [ 8.239206] sd 4:0:0:0: [sdd] Assuming drive cache: write through
- [ 8.239213] sd 4:0:0:0: [sdd] Attached SCSI removable disk
- [ 11.299822] EXT3-fs (sdc1): recovery required on readonly filesystem
- [ 11.299827] EXT3-fs (sdc1): write access will be enabled during recovery
- [ 11.302678] EXT3-fs: barriers not enabled
- [ 11.316060] kjournald starting. Commit interval 5 seconds
- [ 11.316438] EXT3-fs (sdc1): recovery complete
- [ 11.317252] EXT3-fs (sdc1): mounted filesystem with ordered data mode
- [ 16.766092] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 18.431686] EXT3-fs: barriers not enabled
- [ 19.114665] kjournald starting. Commit interval 5 seconds
- [ 19.114732] EXT3-fs (loop1): using internal journal
- [ 19.114737] EXT3-fs (loop1): recovery complete
- [ 19.114764] EXT3-fs (loop1): mounted filesystem with ordered data mode
- [ 108.056763] end_request: I/O error, dev fd0, sector 0
- [ 132.433237] end_request: I/O error, dev fd0, sector 0
- [ 132.433242] Buffer I/O error on device fd0, logical block 0
- [ 156.809442] end_request: I/O error, dev fd0, sector 0
- [ 156.809446] Buffer I/O error on device fd0, logical block 0
- [ 181.924531] end_request: I/O error, dev fd1, sector 0
- [ 206.301424] end_request: I/O error, dev fd1, sector 0
- [ 206.301429] Buffer I/O error on device fd1, logical block 0
- [ 230.676637] end_request: I/O error, dev fd1, sector 0
- [ 230.676641] Buffer I/O error on device fd1, logical block 0
- [ 255.873277] end_request: I/O error, dev fd0, sector 0
- [ 280.253179] end_request: I/O error, dev fd0, sector 0
- [ 280.253184] Buffer I/O error on device fd0, logical block 0
- [ 304.629398] end_request: I/O error, dev fd0, sector 0
- [ 304.629403] Buffer I/O error on device fd0, logical block 0
- [ 329.029303] end_request: I/O error, dev fd1, sector 0
- [ 353.409321] end_request: I/O error, dev fd1, sector 0
- [ 353.409327] Buffer I/O error on device fd1, logical block 0
- [ 377.785183] end_request: I/O error, dev fd1, sector 0
- [ 377.785187] Buffer I/O error on device fd1, logical block 0
- [ 388.497361] udevd[2500]: starting version 173
- [ 389.155703] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 389.279344] intel_rng: FWH not detected
- [ 389.432832] device-mapper: multipath: version 1.3.0 loaded
- [ 389.478016] parport_pc 00:09: reported by Plug and Play ACPI
- [ 389.478077] parport0: PC-style at 0x378, irq 7 [PCSPP]
- [ 390.130661] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 390.132427] e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
- [ 390.132847] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 390.153659] ADDRCONF(NETDEV_UP): eth1: link is not ready
- [ 390.428598] init: failsafe main process (2745) killed by TERM signal
- [ 390.447363] init: alsa-restore main process (2867) terminated with status 19
- [ 391.144214] ppdev: user-space parallel port driver
- [ 391.433592] Bluetooth: Core ver 2.16
- [ 391.433646] NET: Registered protocol family 31
- [ 391.433651] Bluetooth: HCI device and connection manager initialized
- [ 391.433656] Bluetooth: HCI socket layer initialized
- [ 391.433660] Bluetooth: L2CAP socket layer initialized
- [ 391.438365] Bluetooth: SCO socket layer initialized
- [ 391.471091] Bluetooth: RFCOMM TTY layer initialized
- [ 391.471105] Bluetooth: RFCOMM socket layer initialized
- [ 391.471110] Bluetooth: RFCOMM ver 1.11
- [ 391.472319] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 391.472326] Bluetooth: BNEP filters: protocol multicast
- [ 391.934211] e1000: eth0 changing MTU from 1500 to 1460
- [ 393.556425] e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
- [ 393.716728] lp0: using parport0 (interrupt-driven).
- [ 393.748607] init: udev-fallback-graphics main process (3737) terminated with status 1
- [ 401.056024] eth0: no IPv6 routers present
- [ 605.324019] usb 3-2: new low speed USB device number 2 using uhci_hcd
- [ 605.571113] usbcore: registered new interface driver usbhid
- [ 605.571119] usbhid: USB HID core driver
- [ 605.602656] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input2
- [ 605.602891] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-2/input0
- [ 605.632963] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
- [ 605.634943] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input3
- [ 605.635361] logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2/input1
- [ 613.721772] usb 3-2: USB disconnect, device number 2
- [ 633.550783] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
- [ 633.550796] CPU1: Core temperature above threshold, cpu clock throttled (total events = 1)
- [ 633.553111] CPU0: Core temperature/speed normal
- [ 633.553116] CPU1: Core temperature/speed normal
- [ 822.356015] usb 3-2: new low speed USB device number 3 using uhci_hcd
- [ 822.551632] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input4
- [ 822.551813] logitech 0003:046D:C517.0003: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-2/input0
- [ 822.582958] logitech 0003:046D:C517.0004: fixing up Logitech keyboard report descriptor
- [ 822.584902] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input5
- [ 822.585281] logitech 0003:046D:C517.0004: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2/input1
- [ 850.312037] usb 3-2: USB disconnect, device number 3
- [ 899.988021] [Hardware Error]: Machine check events logged
- [ 907.006609] EXT3-fs: barriers not enabled
- [ 907.006884] kjournald starting. Commit interval 5 seconds
- [ 907.007796] EXT3-fs (sdc1): using internal journal
- [ 907.007802] EXT3-fs (sdc1): mounted filesystem with ordered data mode
Add Comment
Please, Sign In to add comment