Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Setup guide for Simplicity MasterNode by Koma#1963
- DO NOT COPY ANY "" marks, they are there to make the commands more clear!
- THIS GUIDE IS ONLY FOR WINDOWS
- requirements:
- - 200000.00 SPL
- - your IP address http://www.whatsmyip.org/
- - ports 11958, 11957, 9999 open in Firewall/ Router
- - Simplicity Qt wallet https://mega.nz/#!j0Ah2aoR!BNQcLwAm9IHiHDk3hSdiCAa9NVFxej8UhvTBFQkNHVI
- Step 1:
- Open wallet and close it. Now go to %appdata% (press start in windows and type it then hit enter) and open Roaming and the Simplicity folder.
- Step 2:
- Create a text file named "simplicity.conf" inside the Simplicity folder. Then copy all these addnode=xxx into it (this is so the wallet synch faster):
- addnode=82.199.168.63
- addnode=108.61.89.39
- addnode=73.9.245.182
- addnode=192.210.241.56
- addnode=81.157.7.157
- addnode=192.210.241.56
- addnode=185.139.236.72
- addnode=93.114.161.46
- addnode=192.3.41.197
- addnode=185.141.166.174
- addnode=185.137.94.216
- addnode=185.139.0.152
- addnode=185.139.239.160
- addnode=195.201.9.2
- addnode=35.227.18.152
- addnode=195.201.21.155
- addnode=195.201.22.34
- addnode=23.95.130.191
- addnode=185.139.238.32
- addnode=173.212.230.232
- addnode=81.157.7.157
- addnode=202.155.199.82
- addnode=45.119.82.123
- addnode=45.32.118.45
- addnode=81.157.7.157
- addnode=207.148.78.192
- addnode=45.32.39.243
- addnode=185.174.63.172
- addnode=68.148.239.72
- addnode=207.148.69.81
- addnode=35.196.241.65
- addnode=78.139.62.253
- addnode=92.28.133.205
- addnode=103.72.163.208
- addnode=195.201.43.143
- addnode=103.253.73.115
- addnode=176.78.145.58
- addnode=79.206.76.202
- addnode=150.129.80.244
- addnode=45.76.54.84
- addnode=103.53.231.13
- addnode=93.114.161.41
- addnode=193.124.128.68
- addnode=81.157.7.157
- addnode=52.10.192.151
- addnode=80.211.183.63
- addnode=86.120.188.61
- addnode=72.222.182.53
- addnode=77.56.155.195
- addnode=58.10.50.57
- addnode=24.56.0.209
- addnode=94.79.185.14
- addnode=46.4.59.215
- addnode=109.51.26.103
- addnode=192.228.206.21
- addnode=93.116.29.98
- addnode=212.12.20.198
- addnode=85.96.68.60
- addnode=183.89.224.44
- addnode=78.61.18.211
- addnode=95.136.63.227
- addnode=86.1.31.116
- addnode=46.249.13.212
- addnode=71.215.88.96
- after this save the file as All Files. !!! double check you have a file called simplicity.conf !!! this is a wrong example: simplicity.conf.txt
- Step 3:
- Open the wallet again and let it synch completely.
- Step 4:
- Open the debug console in the wallet like this: Help > Debug Window > Console
- with the console open, type in there: "masternode genkey"
- write it up with any program (Notepad etc.)
- Step 5:
- now type in: "getaccountaddress masternodename"
- masternodename is the name of you masternode, change it to whatever you like, example: getaccountaddress masternode01
- write it up with any program (Notepad etc.)
- Step 6:
- Send 200000.00 SPL to the address you generated.
- !!! IMPORTANT: it has to be exactly 200000 SPL, if you end up with too much in the MN wallet, send it all back and try again.
- NOTE: the 200000 has to be made from ONE transaction, so sending 2x 100k wont work. !!!
- Step 7:
- Ok so now you should have a synched wallet, and 200000 SPL in it. You can double check by going to Recieve tab in the wallet,
- and if you have another adress there Labeled with same name you chose in Step 5, and same adress that you sent the 200k SPL to.
- Step 8:
- Open up the debug console again, and type in: "masternode outputs" this is the proof of the 200000 SPL transaction.
- write it up with any program (Notepad etc.)
- Step 9:
- Open up again the Simplicity folder in %appdata% > roaming > Simplicity
- Create another text document and name it "masternode.conf"
- Fill it with this info, and check my example so you fill it right!
- <Name of Masternode(Check step 5)> <IP address>:9999> <The result of Step 4> <Result of Step 8> <The number after long character line in Step 8>
- Example:
- masternode01 51.13.115.21:9999 jjapuFzAXwETCrpPJubnrmU6aKzh892WPpkqbr7sr6Si4fdsfss 2a54bba0160dbdcad529370a49fadc7d2bb3f3e9ca4e92533eabeac7b0cc93ea 0
- so everything is in one row, and each part only separated with one space " "
- Now save it As All Files type and "masternode.conf" !!! masternode.conf.txt is WRONG!!!
- Step 10:
- Open up the simplicity.conf file you created in Step 2, and copy in this above all the addnode=xxx lines:
- rpcuser=youruser
- rpcpassword=yourpassword
- rpcport=11958
- port=11957
- server=1
- listen=1
- staking=0
- maxconnections=32
- masternode=1
- masternodeaddr=yourpublicip:9999
- masternodeprivkey=resultofstep1
- And this is how you should edit it:
- rpcuser=write here anything you like
- rpcpassword=anything also
- rpcport=11958
- port=11957
- server=1
- listen=1
- staking=0
- maxconnections=32
- masternode=1
- masternodeaddr=youripaddress:9999
- masternodeprivkey=resultofstep4
- aaand to clarify even more, an example of how it could look:
- rpcuser=user1337
- rpcpassword=123456
- rpcport=11958
- port=11957
- server=1
- listen=1
- staking=0
- maxconnections=32
- masternode=1
- masternodeaddr=51.13.115.21:9999
- masternodeprivkey=2a54bba0160dbdcad529370a49fadc7d2bb3f3e9ca4e92533eabeac7b0cc93ea
- addnode=82.199.168.63
- addnode=108.61.89.39
- addnode=73.9.245.182
- addnode=192.210.241.56
- addnode=81.157.7.157
- addnode=192.210.241.56
- addnode=185.139.236.72
- addnode=93.114.161.46
- addnode=192.3.41.197
- addnode=185.141.166.174
- etc.
- etc...
- After that, Save it.
- Step 11:
- Close the wallet, and restart it.
- Step 12:
- Open up the debug window again, and type in:
- "masternode start-alias yourmasternodename" example: masternode start-alias masternode01
- check step 5 if you forgot what name you chose
- Step 13:
- restart wallet again
- Step 14:
- open up the debug window, and type in "masternode start"
- If you did everything correctly you masternode should now be up and running!
- To check if it is running, Click Maternodes on the left panel in the wallet, and then click on the Simplicity Network tab.
- See if you can find you IP adress there. Wait 30min -1h and look if your Active time has changed. it takes a while for it to update.
- Good luck with your masternode! it should be up and running. rewards are inconsistent, so it can take many hours before you see any rewards.
- MN rewards are labeled as Mined coins
- Guide written by Koma#1963
- If you feel like it
- my SPL address is: 8arNAGFGdPV5LtffAdiH8ArfeGWiM3o5a1
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement