SHARE
TWEET

Untitled

a guest Aug 24th, 2019 67 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:3;RCY:0;EMMC:0;READ:0;CHK:AA;SD:0;READ:0;0.0;CHK:0;
  2. no sdio debug board detected
  3. TE: 499372
  4.  
  5. BL2 Built : 14:59:36, Aug  9 2017.
  6. gxl ge8c6a83 - xiaobo.gu@droid12
  7.  
  8. set vdd cpu_a to 1120 mv
  9. set vdd cpu_b to 1050 mv
  10. set vddee to 1000 mv
  11. Board ID = 7
  12. CPU clk: 1200MHz
  13. DQS-corr enabled
  14. DDR scramble enabled
  15. DDR3 chl: Rank0+1 @ 912MHz - FAIL
  16. DDR4 chl: Rank0+1 @ 1008MHz - PASS
  17. Rank0: 2048MB(auto)-2T-18
  18. Rank1: 1024MB(auto)-2T-18
  19. DataBus test pass!
  20. AddrBus test pass!
  21. Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x00004000
  22. New fip structure!
  23. Load bl30 from SD, src: 0x00010200, des: 0x01100000, size: 0x0000d600
  24. Load bl31 from SD, src: 0x00020200, des: 0x05100000, size: 0x0002c600
  25. Load bl33 from SD, src: 0x00050200, des: 0x01000000, size: 0x00085000
  26. NOTICE:  BL3-1: v1.0(release):801e730
  27. NOTICE:  BL3-1: Built : 22:09:38, Aug 10 2017
  28. mpu_config_enable:ok
  29. [Image: gxl_v1.1.3244-a3237e2 2017-08-16 14:01:18 hong.guo@droid04]
  30. OPS=0x82
  31. wdt: reset registers!
  32. da 14 14 da 62 d 1a 1c 77 6f ca 5 [0.988008 Inits done]
  33. secure task start!
  34. high task start!
  35. low task start!
  36. ERROR:   Error initializing runtime service opteed_fast
  37.  
  38.  
  39. U-Boot 2019.04 (Aug 10 2019 - 09:30:27 +0300) khadas-vim2
  40.  
  41. DRAM:  3 GiB
  42. MMC:   mmc@70000: 0, mmc@72000: 1, mmc@74000: 2
  43. In:    serial
  44. Out:   serial
  45. Err:   serial
  46. [BL31]: tee size: 0
  47. [BL31]: tee size: 0
  48. Net:  
  49. Warning: ethernet@c9410000 (eth0) using random MAC address - 8e:43:cf:90:5e:28
  50. eth0: ethernet@c9410000
  51. Hit any key to stop autoboot:  0
  52. Card did not respond to voltage select!
  53. switch to partitions #0, OK
  54. mmc1 is current device
  55. Scanning mmc 1:1...
  56. Found U-Boot script /boot.scr.uimg
  57. 2331 bytes read in 1 ms (2.2 MiB/s)
  58. ## Executing script at 08000000
  59. **KRESCUE LOAD by fatload mmc 1  FROM //  //  **
  60. load env
  61. 518 bytes read in 5 ms (100.6 KiB/s)
  62. env import -t 0x1000000 206
  63. load dtb to 0x08008000
  64. fatload mmc 1 0x08008000 /rescue/linux.dtb
  65. 29182 bytes read in 5 ms (5.6 MiB/s)
  66. fatload mmc 1 0x50000000 /rescue/linux.dtb
  67. 29182 bytes read in 2 ms (13.9 MiB/s)
  68. load logo
  69. fatload mmc 1 0x1000000 /rescue/splash.bmp.gz
  70. 28264 bytes read in 5 ms (5.4 MiB/s)
  71. Unknown command 'bmp' - try 'help'
  72. load initrd
  73. fatload mmc 1 0x40000000 /rescue/uInitrd
  74. 5763136 bytes read in 250 ms (22 MiB/s)
  75. bootm 0x30000000 0x40000000 0x50000000
  76. booti 1080000 0x40000000 0x50000000
  77. [i] bootargs: root=/dev/ram0 rw init=/init panic=10 net.ifnames=0 loglevel=3 passw=khadas ap_ssid=Krescue ap_passw=12345678 wifi_mode=2g script=sd:hello.sh script=sd:sd2ram.sh eth_hw=C0:4A:00:C0:3F:DB booted= hwver= console=tty0 console=ttyAML0,115200n8 console=ttyS0,115200n8 no_console_suspend consoleblank=0 vout=,enable hdmitx=, hdmimode= cvbsmode= osd_reverse= video_reverse= jtag= reboot_mode= ddr_size=
  78. [i] bootcmd:  run distro_bootcmd
  79. activate emmc before run
  80. switch to partitions #0, OK
  81. mmc1 is current device
  82. [i] sleep 1 sec Ctrl+C for break boot
  83. load raw kernel
  84. fatload mmc 1 1080000 /rescue/Image
  85. 12128264 bytes read in 518 ms (22.3 MiB/s)
  86. ## Loading init Ramdisk from Legacy Image at 40000000 ...
  87.    Image Name:   uInitrd
  88.    Image Type:   AArch64 Linux RAMDisk Image (uncompressed)
  89.    Data Size:    5763072 Bytes = 5.5 MiB
  90.    Load Address: 00000000
  91.    Entry Point:  00000000
  92.    Verifying Checksum ... OK
  93. ## Flattened Device Tree blob at 50000000
  94.    Booting using the fdt blob at 0x50000000
  95.    Loading Ramdisk to bd9da000, end bdf59000 ... OK
  96.    Loading Device Tree to 00000000bd9cf000, end 00000000bd9d91fd ... OK
  97.  
  98. Starting kernel ...
  99.  
  100. domain-0 init dvfs: 4
  101. domain-1 init dvfs: 4
  102.  
  103.  
  104. BusyBox v1.28.4 () built-in shell (ash)
  105.  
  106.  OpenWrt 18.06.3, r7798-97ae9e0ccb
  107.                   Khadas ## hyphop ##
  108.  _  ______                            
  109. | |/ /  _ \ ___  ___  ___ _   _  ___  
  110. | ' /| |_) / _ \/ __|/ __| | | |/ _ \
  111. | . \|  _ <  __/\__ \ (__| |_| |  __/
  112. |_|\_\_| \_\___||___/\___|\__,_|\___|
  113.  extreme tiny and fast rescue system  
  114.  
  115. BUILD: Mon Aug 12 12:09:31 MSK 2019
  116. =====================================
  117. HELP: type 'help' for more info
  118.  
  119. [i] POST_CONFIG:  passw=khadas ap_ssid=Krescue ap_passw=12345678 wifi_mode=2g script=sd:hello.sh script=sd:sd2ram.sh eth_hw=C0:4A:00:C0:3F:DB
  120. root@(none):/#
  121. root@Krescue:/#
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top