yungplayz

S.M.A.R.T.

Apr 19th, 2021
637
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [ root@x99BigBoy ~ ] # smartctl -a /dev/sda
  2. smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.18.0-193.19.1.el8_2.x86_64] (local build)
  3. Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Device Model:     OOS4000G
  7. Serial Number:    00000000
  8. LU WWN Device Id: 5 000c50 0a591ddce
  9. Firmware Version: 0001OOS1
  10. User Capacity:    4,000,787,030,016 bytes [4.00 TB]
  11. Sector Sizes:     512 bytes logical, 4096 bytes physical
  12. Rotation Rate:    5425 rpm
  13. Form Factor:      3.5 inches
  14. Device is:        Not in smartctl database [for details use: -P showall]
  15. ATA Version is:   ACS-3 T13/2161-D revision 5
  16. SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  17. Local Time is:    Mon Apr 19 21:18:22 2021 EEST
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20.  
  21. === START OF READ SMART DATA SECTION ===
  22. SMART overall-health self-assessment test result: PASSED
  23.  
  24. General SMART Values:
  25. Offline data collection status:  (0x00) Offline data collection activity
  26.                     was never started.
  27.                     Auto Offline Data Collection: Disabled.
  28. Self-test execution status:      (   0) The previous self-test routine completed
  29.                     without error or no self-test has ever
  30.                     been run.
  31. Total time to complete Offline
  32. data collection:        (    0) seconds.
  33. Offline data collection
  34. capabilities:            (0x73) SMART execute Offline immediate.
  35.                     Auto Offline data collection on/off support.
  36.                     Suspend Offline collection upon new
  37.                     command.
  38.                     No Offline surface scan supported.
  39.                     Self-test supported.
  40.                     Conveyance Self-test supported.
  41.                     Selective Self-test supported.
  42. SMART capabilities:            (0x0003) Saves SMART data before entering
  43.                     power-saving mode.
  44.                     Supports SMART auto save timer.
  45. Error logging capability:        (0x01) Error logging supported.
  46.                     General Purpose Logging supported.
  47. Short self-test routine
  48. recommended polling time:    (   1) minutes.
  49. Extended self-test routine
  50. recommended polling time:    ( 507) minutes.
  51. Conveyance self-test routine
  52. recommended polling time:    (   2) minutes.
  53. SCT capabilities:          (0x30a5) SCT Status supported.
  54.                     SCT Data Table supported.
  55.  
  56. SMART Attributes Data Structure revision number: 10
  57. Vendor Specific SMART Attributes with Thresholds:
  58. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  59.   1 Raw_Read_Error_Rate     0x000f   100   064   006    Pre-fail  Always       -       369054
  60.   3 Spin_Up_Time            0x0003   097   096   000    Pre-fail  Always       -       0
  61.   4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       81
  62.   5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  63.   7 Seek_Error_Rate         0x000f   073   060   045    Pre-fail  Always       -       19259394
  64.   9 Power_On_Hours          0x0032   096   096   000    Old_age   Always       -       4011 (213 51 0)
  65.  10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
  66.  12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       77
  67. 183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
  68. 184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
  69. 187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
  70. 188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
  71. 189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
  72. 190 Airflow_Temperature_Cel 0x0022   070   058   040    Old_age   Always       -       30 (Min/Max 21/31)
  73. 191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
  74. 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       43
  75. 193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       1568
  76. 194 Temperature_Celsius     0x0022   030   042   000    Old_age   Always       -       30 (0 21 0 0 0)
  77. 195 Hardware_ECC_Recovered  0x001a   100   064   000    Old_age   Always       -       369054
  78. 197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
  79. 198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
  80. 199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
  81. 240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       1422 (126 158 0)
  82. 241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       1582478934
  83. 242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       15642906362
  84.  
  85. SMART Error Log Version: 1
  86. No Errors Logged
  87.  
  88. SMART Self-test log structure revision number 1
  89. No self-tests have been logged.  [To run self-tests, use: smartctl -t]
  90.  
  91. SMART Selective self-test log data structure revision number 1
  92.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  93.     1        0        0  Not_testing
  94.     2        0        0  Not_testing
  95.     3        0        0  Not_testing
  96.     4        0        0  Not_testing
  97.     5        0        0  Not_testing
  98. Selective self-test flags (0x0):
  99.   After scanning selected spans, do NOT read-scan remainder of disk.
  100. If Selective self-test is pending on power-up, resume after 0 minute delay.
  101.  
  102.  
  103. [ root@x99BigBoy ~ ] # smartctl -a /dev/sdb
  104. smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.18.0-193.19.1.el8_2.x86_64] (local build)
  105. Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
  106.  
  107. === START OF INFORMATION SECTION ===
  108. Device Model:     OOS4000G
  109. Serial Number:    00000000
  110. LU WWN Device Id: 5 000c50 0b655e8fb
  111. Firmware Version: 0001OOS1
  112. User Capacity:    4,000,787,030,016 bytes [4.00 TB]
  113. Sector Sizes:     512 bytes logical, 4096 bytes physical
  114. Rotation Rate:    5425 rpm
  115. Form Factor:      3.5 inches
  116. Device is:        Not in smartctl database [for details use: -P showall]
  117. ATA Version is:   ACS-3 T13/2161-D revision 5
  118. SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  119. Local Time is:    Mon Apr 19 21:18:24 2021 EEST
  120. SMART support is: Available - device has SMART capability.
  121. SMART support is: Enabled
  122.  
  123. === START OF READ SMART DATA SECTION ===
  124. SMART overall-health self-assessment test result: PASSED
  125.  
  126. General SMART Values:
  127. Offline data collection status:  (0x00) Offline data collection activity
  128.                     was never started.
  129.                     Auto Offline Data Collection: Disabled.
  130. Self-test execution status:      (   0) The previous self-test routine completed
  131.                     without error or no self-test has ever
  132.                     been run.
  133. Total time to complete Offline
  134. data collection:        (    0) seconds.
  135. Offline data collection
  136. capabilities:            (0x73) SMART execute Offline immediate.
  137.                     Auto Offline data collection on/off support.
  138.                     Suspend Offline collection upon new
  139.                     command.
  140.                     No Offline surface scan supported.
  141.                     Self-test supported.
  142.                     Conveyance Self-test supported.
  143.                     Selective Self-test supported.
  144. SMART capabilities:            (0x0003) Saves SMART data before entering
  145.                     power-saving mode.
  146.                     Supports SMART auto save timer.
  147. Error logging capability:        (0x01) Error logging supported.
  148.                     General Purpose Logging supported.
  149. Short self-test routine
  150. recommended polling time:    (   1) minutes.
  151. Extended self-test routine
  152. recommended polling time:    ( 503) minutes.
  153. Conveyance self-test routine
  154. recommended polling time:    (   2) minutes.
  155. SCT capabilities:          (0x30a5) SCT Status supported.
  156.                     SCT Data Table supported.
  157.  
  158. SMART Attributes Data Structure revision number: 10
  159. Vendor Specific SMART Attributes with Thresholds:
  160. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  161.   1 Raw_Read_Error_Rate     0x000f   072   064   006    Pre-fail  Always       -       17126913
  162.   3 Spin_Up_Time            0x0003   097   096   000    Pre-fail  Always       -       0
  163.   4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       83
  164.   5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  165.   7 Seek_Error_Rate         0x000f   073   060   045    Pre-fail  Always       -       19023045
  166.   9 Power_On_Hours          0x0032   096   096   000    Old_age   Always       -       4011 (71 63 0)
  167.  10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
  168.  12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       79
  169. 183 Runtime_Bad_Block       0x0032   095   095   000    Old_age   Always       -       5
  170. 184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
  171. 187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
  172. 188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
  173. 189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
  174. 190 Airflow_Temperature_Cel 0x0022   070   059   040    Old_age   Always       -       30 (Min/Max 21/31)
  175. 191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
  176. 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       42
  177. 193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       1553
  178. 194 Temperature_Celsius     0x0022   030   041   000    Old_age   Always       -       30 (0 21 0 0 0)
  179. 195 Hardware_ECC_Recovered  0x001a   072   064   000    Old_age   Always       -       17126913
  180. 197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
  181. 198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
  182. 199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       30
  183. 240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       1369 (79 154 0)
  184. 241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       1582674430
  185. 242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       15836052966
  186.  
  187. SMART Error Log Version: 1
  188. No Errors Logged
  189.  
  190. SMART Self-test log structure revision number 1
  191. No self-tests have been logged.  [To run self-tests, use: smartctl -t]
  192.  
  193. SMART Selective self-test log data structure revision number 1
  194.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  195.     1        0        0  Not_testing
  196.     2        0        0  Not_testing
  197.     3        0        0  Not_testing
  198.     4        0        0  Not_testing
  199.     5        0        0  Not_testing
  200. Selective self-test flags (0x0):
  201.   After scanning selected spans, do NOT read-scan remainder of disk.
  202. If Selective self-test is pending on power-up, resume after 0 minute delay.
  203.  
  204.  
  205. [ root@x99BigBoy ~ ] # smartctl -a /dev/sdc
  206. smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.18.0-193.19.1.el8_2.x86_64] (local build)
  207. Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
  208.  
  209. === START OF INFORMATION SECTION ===
  210. Device Model:     OOS4000G
  211. Serial Number:    00000000
  212. LU WWN Device Id: 5 000c50 0c36909fd
  213. Firmware Version: 0001OOS1
  214. User Capacity:    4,000,787,030,016 bytes [4.00 TB]
  215. Sector Sizes:     512 bytes logical, 4096 bytes physical
  216. Rotation Rate:    5425 rpm
  217. Form Factor:      3.5 inches
  218. Device is:        Not in smartctl database [for details use: -P showall]
  219. ATA Version is:   ACS-3 T13/2161-D revision 5
  220. SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  221. Local Time is:    Mon Apr 19 21:18:25 2021 EEST
  222. SMART support is: Available - device has SMART capability.
  223. SMART support is: Enabled
  224.  
  225. === START OF READ SMART DATA SECTION ===
  226. SMART overall-health self-assessment test result: PASSED
  227.  
  228. General SMART Values:
  229. Offline data collection status:  (0x00) Offline data collection activity
  230.                     was never started.
  231.                     Auto Offline Data Collection: Disabled.
  232. Self-test execution status:      (   0) The previous self-test routine completed
  233.                     without error or no self-test has ever
  234.                     been run.
  235. Total time to complete Offline
  236. data collection:        (    0) seconds.
  237. Offline data collection
  238. capabilities:            (0x73) SMART execute Offline immediate.
  239.                     Auto Offline data collection on/off support.
  240.                     Suspend Offline collection upon new
  241.                     command.
  242.                     No Offline surface scan supported.
  243.                     Self-test supported.
  244.                     Conveyance Self-test supported.
  245.                     Selective Self-test supported.
  246. SMART capabilities:            (0x0003) Saves SMART data before entering
  247.                     power-saving mode.
  248.                     Supports SMART auto save timer.
  249. Error logging capability:        (0x01) Error logging supported.
  250.                     General Purpose Logging supported.
  251. Short self-test routine
  252. recommended polling time:    (   1) minutes.
  253. Extended self-test routine
  254. recommended polling time:    ( 514) minutes.
  255. Conveyance self-test routine
  256. recommended polling time:    (   2) minutes.
  257. SCT capabilities:          (0x30a5) SCT Status supported.
  258.                     SCT Data Table supported.
  259.  
  260. SMART Attributes Data Structure revision number: 10
  261. Vendor Specific SMART Attributes with Thresholds:
  262. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  263.   1 Raw_Read_Error_Rate     0x000f   082   065   006    Pre-fail  Always       -       169486017
  264.   3 Spin_Up_Time            0x0003   097   096   000    Pre-fail  Always       -       0
  265.   4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       82
  266.   5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  267.   7 Seek_Error_Rate         0x000f   071   060   045    Pre-fail  Always       -       13975873
  268.   9 Power_On_Hours          0x0032   096   096   000    Old_age   Always       -       4012 (156 161 0)
  269.  10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
  270.  12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       78
  271. 183 Runtime_Bad_Block       0x0032   097   097   000    Old_age   Always       -       3
  272. 184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
  273. 187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
  274. 188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
  275. 189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
  276. 190 Airflow_Temperature_Cel 0x0022   070   058   040    Old_age   Always       -       30 (Min/Max 22/31)
  277. 191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
  278. 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       37
  279. 193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       539
  280. 194 Temperature_Celsius     0x0022   030   042   000    Old_age   Always       -       30 (0 22 0 0 0)
  281. 195 Hardware_ECC_Recovered  0x001a   082   065   000    Old_age   Always       -       169486017
  282. 197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
  283. 198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
  284. 199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       21
  285. 240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       520 (61 82 0)
  286. 241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       2628588574
  287. 242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       7830426277
  288.  
  289. SMART Error Log Version: 1
  290. No Errors Logged
  291.  
  292. SMART Self-test log structure revision number 1
  293. No self-tests have been logged.  [To run self-tests, use: smartctl -t]
  294.  
  295. SMART Selective self-test log data structure revision number 1
  296.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  297.     1        0        0  Not_testing
  298.     2        0        0  Not_testing
  299.     3        0        0  Not_testing
  300.     4        0        0  Not_testing
  301.     5        0        0  Not_testing
  302. Selective self-test flags (0x0):
  303.   After scanning selected spans, do NOT read-scan remainder of disk.
  304. If Selective self-test is pending on power-up, resume after 0 minute delay.
  305.  
  306.  
  307. [ root@x99BigBoy ~ ] # smartctl -a /dev/sdd
  308. smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.18.0-193.19.1.el8_2.x86_64] (local build)
  309. Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
  310.  
  311. === START OF INFORMATION SECTION ===
  312. Device Model:     OOS4000G
  313. Serial Number:    00000000
  314. LU WWN Device Id: 5 000c50 0b54301be
  315. Firmware Version: 0001OOS1
  316. User Capacity:    4,000,787,030,016 bytes [4.00 TB]
  317. Sector Sizes:     512 bytes logical, 4096 bytes physical
  318. Rotation Rate:    5425 rpm
  319. Form Factor:      3.5 inches
  320. Device is:        Not in smartctl database [for details use: -P showall]
  321. ATA Version is:   ACS-3 T13/2161-D revision 5
  322. SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  323. Local Time is:    Mon Apr 19 21:18:28 2021 EEST
  324. SMART support is: Available - device has SMART capability.
  325. SMART support is: Enabled
  326.  
  327. === START OF READ SMART DATA SECTION ===
  328. SMART overall-health self-assessment test result: PASSED
  329.  
  330. General SMART Values:
  331. Offline data collection status:  (0x00) Offline data collection activity
  332.                     was never started.
  333.                     Auto Offline Data Collection: Disabled.
  334. Self-test execution status:      (   0) The previous self-test routine completed
  335.                     without error or no self-test has ever
  336.                     been run.
  337. Total time to complete Offline
  338. data collection:        (    0) seconds.
  339. Offline data collection
  340. capabilities:            (0x73) SMART execute Offline immediate.
  341.                     Auto Offline data collection on/off support.
  342.                     Suspend Offline collection upon new
  343.                     command.
  344.                     No Offline surface scan supported.
  345.                     Self-test supported.
  346.                     Conveyance Self-test supported.
  347.                     Selective Self-test supported.
  348. SMART capabilities:            (0x0003) Saves SMART data before entering
  349.                     power-saving mode.
  350.                     Supports SMART auto save timer.
  351. Error logging capability:        (0x01) Error logging supported.
  352.                     General Purpose Logging supported.
  353. Short self-test routine
  354. recommended polling time:    (   1) minutes.
  355. Extended self-test routine
  356. recommended polling time:    ( 507) minutes.
  357. Conveyance self-test routine
  358. recommended polling time:    (   2) minutes.
  359. SCT capabilities:          (0x30a5) SCT Status supported.
  360.                     SCT Data Table supported.
  361.  
  362. SMART Attributes Data Structure revision number: 10
  363. Vendor Specific SMART Attributes with Thresholds:
  364. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  365.   1 Raw_Read_Error_Rate     0x000f   072   064   006    Pre-fail  Always       -       17407697
  366.   3 Spin_Up_Time            0x0003   097   096   000    Pre-fail  Always       -       0
  367.   4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       82
  368.   5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  369.   7 Seek_Error_Rate         0x000f   071   060   045    Pre-fail  Always       -       11776498
  370.   9 Power_On_Hours          0x0032   096   096   000    Old_age   Always       -       4011 (117 63 0)
  371.  10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
  372.  12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       78
  373. 183 Runtime_Bad_Block       0x0032   095   095   000    Old_age   Always       -       5
  374. 184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
  375. 187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
  376. 188 Command_Timeout         0x0032   100   078   000    Old_age   Always       -       12885098528
  377. 189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
  378. 190 Airflow_Temperature_Cel 0x0022   070   058   040    Old_age   Always       -       30 (Min/Max 21/31)
  379. 191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
  380. 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       32
  381. 193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       539
  382. 194 Temperature_Celsius     0x0022   030   042   000    Old_age   Always       -       30 (0 21 0 0 0)
  383. 195 Hardware_ECC_Recovered  0x001a   072   064   000    Old_age   Always       -       17407697
  384. 197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
  385. 198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
  386. 199 UDMA_CRC_Error_Count    0x003e   200   197   000    Old_age   Always       -       30
  387. 240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       514 (73 73 0)
  388. 241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       1522474230
  389. 242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       8163136342
  390.  
  391. SMART Error Log Version: 1
  392. No Errors Logged
  393.  
  394. SMART Self-test log structure revision number 1
  395. No self-tests have been logged.  [To run self-tests, use: smartctl -t]
  396.  
  397. SMART Selective self-test log data structure revision number 1
  398.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  399.     1        0        0  Not_testing
  400.     2        0        0  Not_testing
  401.     3        0        0  Not_testing
  402.     4        0        0  Not_testing
  403.     5        0        0  Not_testing
  404. Selective self-test flags (0x0):
  405.   After scanning selected spans, do NOT read-scan remainder of disk.
  406. If Selective self-test is pending on power-up, resume after 0 minute delay.
  407.  
  408.  
  409. [ root@x99BigBoy ~ ] # smartctl -a /dev/sde
  410. smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.18.0-193.19.1.el8_2.x86_64] (local build)
  411. Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
  412.  
  413. === START OF INFORMATION SECTION ===
  414. Device Model:     OOS4000G
  415. Serial Number:    00000000
  416. LU WWN Device Id: 5 000c50 0b286f25b
  417. Firmware Version: 0001OOS1
  418. User Capacity:    4,000,787,030,016 bytes [4.00 TB]
  419. Sector Sizes:     512 bytes logical, 4096 bytes physical
  420. Rotation Rate:    5425 rpm
  421. Form Factor:      3.5 inches
  422. Device is:        Not in smartctl database [for details use: -P showall]
  423. ATA Version is:   ACS-3 T13/2161-D revision 5
  424. SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  425. Local Time is:    Mon Apr 19 21:18:32 2021 EEST
  426. SMART support is: Available - device has SMART capability.
  427. SMART support is: Enabled
  428.  
  429. === START OF READ SMART DATA SECTION ===
  430. SMART overall-health self-assessment test result: PASSED
  431.  
  432. General SMART Values:
  433. Offline data collection status:  (0x00) Offline data collection activity
  434.                     was never started.
  435.                     Auto Offline Data Collection: Disabled.
  436. Self-test execution status:      (   0) The previous self-test routine completed
  437.                     without error or no self-test has ever
  438.                     been run.
  439. Total time to complete Offline
  440. data collection:        (    0) seconds.
  441. Offline data collection
  442. capabilities:            (0x73) SMART execute Offline immediate.
  443.                     Auto Offline data collection on/off support.
  444.                     Suspend Offline collection upon new
  445.                     command.
  446.                     No Offline surface scan supported.
  447.                     Self-test supported.
  448.                     Conveyance Self-test supported.
  449.                     Selective Self-test supported.
  450. SMART capabilities:            (0x0003) Saves SMART data before entering
  451.                     power-saving mode.
  452.                     Supports SMART auto save timer.
  453. Error logging capability:        (0x01) Error logging supported.
  454.                     General Purpose Logging supported.
  455. Short self-test routine
  456. recommended polling time:    (   1) minutes.
  457. Extended self-test routine
  458. recommended polling time:    ( 487) minutes.
  459. Conveyance self-test routine
  460. recommended polling time:    (   2) minutes.
  461. SCT capabilities:          (0x30a5) SCT Status supported.
  462.                     SCT Data Table supported.
  463.  
  464. SMART Attributes Data Structure revision number: 10
  465. Vendor Specific SMART Attributes with Thresholds:
  466. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  467.   1 Raw_Read_Error_Rate     0x000f   082   065   006    Pre-fail  Always       -       172960393
  468.   3 Spin_Up_Time            0x0003   094   092   000    Pre-fail  Always       -       0
  469.   4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       77
  470.   5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  471.   7 Seek_Error_Rate         0x000f   072   061   045    Pre-fail  Always       -       17697224
  472.   9 Power_On_Hours          0x0032   096   096   000    Old_age   Always       -       4011 (162 168 0)
  473.  10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
  474.  12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       73
  475. 183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
  476. 184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
  477. 187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
  478. 188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
  479. 189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
  480. 190 Airflow_Temperature_Cel 0x0022   066   056   040    Old_age   Always       -       34 (Min/Max 20/34)
  481. 191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
  482. 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       34
  483. 193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       1464
  484. 194 Temperature_Celsius     0x0022   034   044   000    Old_age   Always       -       34 (0 20 0 0 0)
  485. 195 Hardware_ECC_Recovered  0x001a   082   065   000    Old_age   Always       -       172960393
  486. 197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
  487. 198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
  488. 199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
  489. 240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       1349 (93 253 0)
  490. 241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       1582409862
  491. 242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       15115867151
  492.  
  493. SMART Error Log Version: 1
  494. No Errors Logged
  495.  
  496. SMART Self-test log structure revision number 1
  497. No self-tests have been logged.  [To run self-tests, use: smartctl -t]
  498.  
  499. SMART Selective self-test log data structure revision number 1
  500.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  501.     1        0        0  Not_testing
  502.     2        0        0  Not_testing
  503.     3        0        0  Not_testing
  504.     4        0        0  Not_testing
  505.     5        0        0  Not_testing
  506. Selective self-test flags (0x0):
  507.   After scanning selected spans, do NOT read-scan remainder of disk.
  508. If Selective self-test is pending on power-up, resume after 0 minute delay.
  509.  
  510.  
  511. [ root@x99BigBoy ~ ] # smartctl -a /dev/sdf
  512. smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.18.0-193.19.1.el8_2.x86_64] (local build)
  513. Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
  514.  
  515. === START OF INFORMATION SECTION ===
  516. Device Model:     OOS4000G
  517. Serial Number:    00000000
  518. LU WWN Device Id: 5 000c50 0a40ac4f2
  519. Firmware Version: 0001OOS1
  520. User Capacity:    4,000,787,030,016 bytes [4.00 TB]
  521. Sector Sizes:     512 bytes logical, 4096 bytes physical
  522. Rotation Rate:    5425 rpm
  523. Form Factor:      3.5 inches
  524. Device is:        Not in smartctl database [for details use: -P showall]
  525. ATA Version is:   ACS-3 T13/2161-D revision 5
  526. SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  527. Local Time is:    Mon Apr 19 21:18:35 2021 EEST
  528. SMART support is: Available - device has SMART capability.
  529. SMART support is: Enabled
  530.  
  531. === START OF READ SMART DATA SECTION ===
  532. SMART overall-health self-assessment test result: PASSED
  533.  
  534. General SMART Values:
  535. Offline data collection status:  (0x00) Offline data collection activity
  536.                     was never started.
  537.                     Auto Offline Data Collection: Disabled.
  538. Self-test execution status:      (   0) The previous self-test routine completed
  539.                     without error or no self-test has ever
  540.                     been run.
  541. Total time to complete Offline
  542. data collection:        (    0) seconds.
  543. Offline data collection
  544. capabilities:            (0x73) SMART execute Offline immediate.
  545.                     Auto Offline data collection on/off support.
  546.                     Suspend Offline collection upon new
  547.                     command.
  548.                     No Offline surface scan supported.
  549.                     Self-test supported.
  550.                     Conveyance Self-test supported.
  551.                     Selective Self-test supported.
  552. SMART capabilities:            (0x0003) Saves SMART data before entering
  553.                     power-saving mode.
  554.                     Supports SMART auto save timer.
  555. Error logging capability:        (0x01) Error logging supported.
  556.                     General Purpose Logging supported.
  557. Short self-test routine
  558. recommended polling time:    (   1) minutes.
  559. Extended self-test routine
  560. recommended polling time:    ( 483) minutes.
  561. Conveyance self-test routine
  562. recommended polling time:    (   2) minutes.
  563. SCT capabilities:          (0x30a5) SCT Status supported.
  564.                     SCT Data Table supported.
  565.  
  566. SMART Attributes Data Structure revision number: 10
  567. Vendor Specific SMART Attributes with Thresholds:
  568. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  569.   1 Raw_Read_Error_Rate     0x000f   082   065   006    Pre-fail  Always       -       172970172
  570.   3 Spin_Up_Time            0x0003   097   096   000    Pre-fail  Always       -       0
  571.   4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       78
  572.   5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  573.   7 Seek_Error_Rate         0x000f   073   060   045    Pre-fail  Always       -       18634058
  574.   9 Power_On_Hours          0x0032   096   096   000    Old_age   Always       -       4012 (230 204 0)
  575.  10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
  576.  12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       74
  577. 183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
  578. 184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
  579. 187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
  580. 188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
  581. 189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
  582. 190 Airflow_Temperature_Cel 0x0022   069   058   040    Old_age   Always       -       31 (Min/Max 21/32)
  583. 191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
  584. 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       32
  585. 193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       1546
  586. 194 Temperature_Celsius     0x0022   031   042   000    Old_age   Always       -       31 (0 21 0 0 0)
  587. 195 Hardware_ECC_Recovered  0x001a   082   065   000    Old_age   Always       -       172970172
  588. 197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
  589. 198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
  590. 199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
  591. 240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       1343 (124 115 0)
  592. 241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       1582360214
  593. 242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       14968015442
  594.  
  595. SMART Error Log Version: 1
  596. No Errors Logged
  597.  
  598. SMART Self-test log structure revision number 1
  599. No self-tests have been logged.  [To run self-tests, use: smartctl -t]
  600.  
  601. SMART Selective self-test log data structure revision number 1
  602.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  603.     1        0        0  Not_testing
  604.     2        0        0  Not_testing
  605.     3        0        0  Not_testing
  606.     4        0        0  Not_testing
  607.     5        0        0  Not_testing
  608. Selective self-test flags (0x0):
  609.   After scanning selected spans, do NOT read-scan remainder of disk.
  610. If Selective self-test is pending on power-up, resume after 0 minute delay.
  611.  
  612.  
  613. [ root@x99BigBoy ~ ] # smartctl -a /dev/sdg
  614. smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.18.0-193.19.1.el8_2.x86_64] (local build)
  615. Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
  616.  
  617. === START OF INFORMATION SECTION ===
  618. Device Model:     OOS4000G
  619. Serial Number:    00000000
  620. LU WWN Device Id: 5 000c50 0b52ff3c6
  621. Firmware Version: 0001OOS1
  622. User Capacity:    4,000,787,030,016 bytes [4.00 TB]
  623. Sector Sizes:     512 bytes logical, 4096 bytes physical
  624. Rotation Rate:    5425 rpm
  625. Form Factor:      3.5 inches
  626. Device is:        Not in smartctl database [for details use: -P showall]
  627. ATA Version is:   ACS-3 T13/2161-D revision 5
  628. SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  629. Local Time is:    Mon Apr 19 21:18:36 2021 EEST
  630. SMART support is: Available - device has SMART capability.
  631. SMART support is: Enabled
  632.  
  633. === START OF READ SMART DATA SECTION ===
  634. SMART overall-health self-assessment test result: PASSED
  635.  
  636. General SMART Values:
  637. Offline data collection status:  (0x00) Offline data collection activity
  638.                     was never started.
  639.                     Auto Offline Data Collection: Disabled.
  640. Self-test execution status:      (   0) The previous self-test routine completed
  641.                     without error or no self-test has ever
  642.                     been run.
  643. Total time to complete Offline
  644. data collection:        (    0) seconds.
  645. Offline data collection
  646. capabilities:            (0x73) SMART execute Offline immediate.
  647.                     Auto Offline data collection on/off support.
  648.                     Suspend Offline collection upon new
  649.                     command.
  650.                     No Offline surface scan supported.
  651.                     Self-test supported.
  652.                     Conveyance Self-test supported.
  653.                     Selective Self-test supported.
  654. SMART capabilities:            (0x0003) Saves SMART data before entering
  655.                     power-saving mode.
  656.                     Supports SMART auto save timer.
  657. Error logging capability:        (0x01) Error logging supported.
  658.                     General Purpose Logging supported.
  659. Short self-test routine
  660. recommended polling time:    (   1) minutes.
  661. Extended self-test routine
  662. recommended polling time:    ( 493) minutes.
  663. Conveyance self-test routine
  664. recommended polling time:    (   2) minutes.
  665. SCT capabilities:          (0x30a5) SCT Status supported.
  666.                     SCT Data Table supported.
  667.  
  668. SMART Attributes Data Structure revision number: 10
  669. Vendor Specific SMART Attributes with Thresholds:
  670. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  671.   1 Raw_Read_Error_Rate     0x000f   083   067   006    Pre-fail  Always       -       206326870
  672.   3 Spin_Up_Time            0x0003   094   092   000    Pre-fail  Always       -       0
  673.   4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       85
  674.   5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  675.   7 Seek_Error_Rate         0x000f   073   061   045    Pre-fail  Always       -       17861201
  676.   9 Power_On_Hours          0x0032   096   096   000    Old_age   Always       -       4011 (193 148 0)
  677.  10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
  678.  12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       81
  679. 183 Runtime_Bad_Block       0x0032   095   095   000    Old_age   Always       -       5
  680. 184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
  681. 187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
  682. 188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
  683. 189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
  684. 190 Airflow_Temperature_Cel 0x0022   067   053   040    Old_age   Always       -       33 (Min/Max 21/34)
  685. 191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
  686. 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       38
  687. 193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       1475
  688. 194 Temperature_Celsius     0x0022   033   047   000    Old_age   Always       -       33 (0 21 0 0 0)
  689. 195 Hardware_ECC_Recovered  0x001a   083   067   000    Old_age   Always       -       206326870
  690. 197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
  691. 198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
  692. 199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       29
  693. 240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       1379 (169 121 0)
  694. 241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       1582600814
  695. 242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       15292806442
  696.  
  697. SMART Error Log Version: 1
  698. No Errors Logged
  699.  
  700. SMART Self-test log structure revision number 1
  701. No self-tests have been logged.  [To run self-tests, use: smartctl -t]
  702.  
  703. SMART Selective self-test log data structure revision number 1
  704.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  705.     1        0        0  Not_testing
  706.     2        0        0  Not_testing
  707.     3        0        0  Not_testing
  708.     4        0        0  Not_testing
  709.     5        0        0  Not_testing
  710. Selective self-test flags (0x0):
  711.   After scanning selected spans, do NOT read-scan remainder of disk.
  712. If Selective self-test is pending on power-up, resume after 0 minute delay.
  713.  
  714.  
  715. [ root@x99BigBoy ~ ] # smartctl -a /dev/sdh
  716. smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.18.0-193.19.1.el8_2.x86_64] (local build)
  717. Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
  718.  
  719. === START OF INFORMATION SECTION ===
  720. Device Model:     OOS4000G
  721. Serial Number:    00000000
  722. LU WWN Device Id: 5 000c50 0c34dc67d
  723. Firmware Version: 0001OOS1
  724. User Capacity:    4,000,787,030,016 bytes [4.00 TB]
  725. Sector Sizes:     512 bytes logical, 4096 bytes physical
  726. Rotation Rate:    5425 rpm
  727. Form Factor:      3.5 inches
  728. Device is:        Not in smartctl database [for details use: -P showall]
  729. ATA Version is:   ACS-3 T13/2161-D revision 5
  730. SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  731. Local Time is:    Mon Apr 19 21:18:38 2021 EEST
  732. SMART support is: Available - device has SMART capability.
  733. SMART support is: Enabled
  734.  
  735. === START OF READ SMART DATA SECTION ===
  736. SMART overall-health self-assessment test result: PASSED
  737.  
  738. General SMART Values:
  739. Offline data collection status:  (0x00) Offline data collection activity
  740.                     was never started.
  741.                     Auto Offline Data Collection: Disabled.
  742. Self-test execution status:      (   0) The previous self-test routine completed
  743.                     without error or no self-test has ever
  744.                     been run.
  745. Total time to complete Offline
  746. data collection:        (    0) seconds.
  747. Offline data collection
  748. capabilities:            (0x73) SMART execute Offline immediate.
  749.                     Auto Offline data collection on/off support.
  750.                     Suspend Offline collection upon new
  751.                     command.
  752.                     No Offline surface scan supported.
  753.                     Self-test supported.
  754.                     Conveyance Self-test supported.
  755.                     Selective Self-test supported.
  756. SMART capabilities:            (0x0003) Saves SMART data before entering
  757.                     power-saving mode.
  758.                     Supports SMART auto save timer.
  759. Error logging capability:        (0x01) Error logging supported.
  760.                     General Purpose Logging supported.
  761. Short self-test routine
  762. recommended polling time:    (   1) minutes.
  763. Extended self-test routine
  764. recommended polling time:    ( 487) minutes.
  765. Conveyance self-test routine
  766. recommended polling time:    (   2) minutes.
  767. SCT capabilities:          (0x30a5) SCT Status supported.
  768.                     SCT Data Table supported.
  769.  
  770. SMART Attributes Data Structure revision number: 10
  771. Vendor Specific SMART Attributes with Thresholds:
  772. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  773.   1 Raw_Read_Error_Rate     0x000f   082   064   006    Pre-fail  Always       -       173118583
  774.   3 Spin_Up_Time            0x0003   094   092   000    Pre-fail  Always       -       0
  775.   4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       82
  776.   5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  777.   7 Seek_Error_Rate         0x000f   072   061   045    Pre-fail  Always       -       17605435
  778.   9 Power_On_Hours          0x0032   096   096   000    Old_age   Always       -       4011 (15 139 0)
  779.  10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
  780.  12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       78
  781. 183 Runtime_Bad_Block       0x0032   096   096   000    Old_age   Always       -       4
  782. 184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
  783. 187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
  784. 188 Command_Timeout         0x0032   099   099   000    Old_age   Always       -       7
  785. 189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
  786. 190 Airflow_Temperature_Cel 0x0022   066   055   040    Old_age   Always       -       34 (Min/Max 21/35)
  787. 191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
  788. 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       34
  789. 193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       1481
  790. 194 Temperature_Celsius     0x0022   034   045   000    Old_age   Always       -       34 (0 21 0 0 0)
  791. 195 Hardware_ECC_Recovered  0x001a   082   064   000    Old_age   Always       -       173118583
  792. 197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
  793. 198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
  794. 199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       87
  795. 240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       1347 (6 209 0)
  796. 241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       1582381160
  797. 242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       15160432316
  798.  
  799. SMART Error Log Version: 1
  800. No Errors Logged
  801.  
  802. SMART Self-test log structure revision number 1
  803. No self-tests have been logged.  [To run self-tests, use: smartctl -t]
  804.  
  805. SMART Selective self-test log data structure revision number 1
  806.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  807.     1        0        0  Not_testing
  808.     2        0        0  Not_testing
  809.     3        0        0  Not_testing
  810.     4        0        0  Not_testing
  811.     5        0        0  Not_testing
  812. Selective self-test flags (0x0):
  813.   After scanning selected spans, do NOT read-scan remainder of disk.
  814. If Selective self-test is pending on power-up, resume after 0 minute delay.
  815.  
  816.  
  817. [ root@x99BigBoy ~ ] #
RAW Paste Data

Adblocker detected! Please consider disabling it...

We've detected AdBlock Plus or some other adblocking software preventing Pastebin.com from fully loading.

We don't have any obnoxious sound, or popup ads, we actively block these annoying types of ads!

Please add Pastebin.com to your ad blocker whitelist or disable your adblocking software.

×