daily pastebin goal
12%
SHARE
TWEET

Untitled

a guest Jan 13th, 2016 44 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-32-generic] (local build)
  2. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family:     Seagate Momentus SpinPoint M8 (AF)
  6. Device Model:     ST1000LM024 HN-M101MBB
  7. Serial Number:    S2U5J9DCB77375
  8. LU WWN Device Id: 5 0004cf 208f82e60
  9. Firmware Version: 2AR10001
  10. User Capacity:    1,000,204,886,016 bytes [1.00 TB]
  11. Sector Sizes:     512 bytes logical, 4096 bytes physical
  12. Rotation Rate:    5400 rpm
  13. Device is:        In smartctl database [for details use: -P show]
  14. ATA Version is:   ATA8-ACS T13/1699-D revision 6
  15. SATA Version is:  SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
  16. Local Time is:    Wed Jan 13 10:46:32 2016 UTC
  17. SMART support is: Available - device has SMART capability.
  18. SMART support is: Enabled
  19.  
  20. === START OF READ SMART DATA SECTION ===
  21. SMART overall-health self-assessment test result: PASSED
  22.  
  23. General SMART Values:
  24. Offline data collection status:  (0x00) Offline data collection activity
  25.                     was never started.
  26.                     Auto Offline Data Collection: Disabled.
  27. Self-test execution status:      (   0) The previous self-test routine completed
  28.                     without error or no self-test has ever
  29.                     been run.
  30. Total time to complete Offline
  31. data collection:        (13140) seconds.
  32. Offline data collection
  33. capabilities:            (0x5b) SMART execute Offline immediate.
  34.                     Auto Offline data collection on/off support.
  35.                     Suspend Offline collection upon new
  36.                     command.
  37.                     Offline surface scan supported.
  38.                     Self-test supported.
  39.                     No Conveyance Self-test supported.
  40.                     Selective Self-test supported.
  41. SMART capabilities:            (0x0003) Saves SMART data before entering
  42.                     power-saving mode.
  43.                     Supports SMART auto save timer.
  44. Error logging capability:        (0x01) Error logging supported.
  45.                     General Purpose Logging supported.
  46. Short self-test routine
  47. recommended polling time:    (   2) minutes.
  48. Extended self-test routine
  49. recommended polling time:    ( 219) minutes.
  50. SCT capabilities:          (0x003f) SCT Status supported.
  51.                     SCT Error Recovery Control supported.
  52.                     SCT Feature Control supported.
  53.                     SCT Data Table supported.
  54.  
  55. SMART Attributes Data Structure revision number: 16
  56. Vendor Specific SMART Attributes with Thresholds:
  57. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  58.   1 Raw_Read_Error_Rate     0x002f   100   100   051    Pre-fail  Always       -       7230
  59.   2 Throughput_Performance  0x0026   252   252   000    Old_age   Always       -       0
  60.   3 Spin_Up_Time            0x0023   089   078   025    Pre-fail  Always       -       3458
  61.   4 Start_Stop_Count        0x0032   097   097   000    Old_age   Always       -       3206
  62.   5 Reallocated_Sector_Ct   0x0033   252   252   010    Pre-fail  Always       -       0
  63.   7 Seek_Error_Rate         0x002e   252   252   051    Old_age   Always       -       0
  64.   8 Seek_Time_Performance   0x0024   252   252   015    Old_age   Offline      -       0
  65.   9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       15584
  66.  10 Spin_Retry_Count        0x0032   252   252   051    Old_age   Always       -       0
  67.  11 Calibration_Retry_Count 0x0032   099   099   000    Old_age   Always       -       1144
  68.  12 Power_Cycle_Count       0x0032   098   098   000    Old_age   Always       -       3012
  69. 191 G-Sense_Error_Rate      0x0022   100   100   000    Old_age   Always       -       132
  70. 192 Power-Off_Retract_Count 0x0022   252   252   000    Old_age   Always       -       0
  71. 194 Temperature_Celsius     0x0002   058   029   000    Old_age   Always       -       42 (Min/Max 13/71)
  72. 195 Hardware_ECC_Recovered  0x003a   100   100   000    Old_age   Always       -       0
  73. 196 Reallocated_Event_Count 0x0032   252   252   000    Old_age   Always       -       0
  74. 197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       31
  75. 198 Offline_Uncorrectable   0x0030   252   252   000    Old_age   Offline      -       0
  76. 199 UDMA_CRC_Error_Count    0x0036   200   200   000    Old_age   Always       -       0
  77. 200 Multi_Zone_Error_Rate   0x002a   001   001   000    Old_age   Always       -       108438
  78. 223 Load_Retry_Count        0x0032   099   099   000    Old_age   Always       -       1144
  79. 225 Load_Cycle_Count        0x0032   099   099   000    Old_age   Always       -       16317
  80.  
  81. SMART Error Log Version: 1
  82. No Errors Logged
  83.  
  84. SMART Self-test log structure revision number 1
  85. No self-tests have been logged.  [To run self-tests, use: smartctl -t]
  86.  
  87.  
  88. SMART Selective self-test log data structure revision number 0
  89. Note: revision number not 1 implies that no selective self-test has ever been run
  90.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  91.     1        0        0  Completed [00% left] (0-65535)
  92.     2        0        0  Not_testing
  93.     3        0        0  Not_testing
  94.     4        0        0  Not_testing
  95.     5        0        0  Not_testing
  96. Selective self-test flags (0x0):
  97.   After scanning selected spans, do NOT read-scan remainder of disk.
  98. If Selective self-test is pending on power-up, resume after 0 minute delay.
RAW Paste Data
Top