Advertisement
LukasThyWalls

Cisco Linksys E3000 - Kernel Log - OpenWrt 19.07.4 r11208-ce6496d796

Oct 1st, 2020
218
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 18.29 KB | None | 0 0
  1. [ 0.000000] Linux version 4.14.195 (builder@buildhost) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11208-ce6496d796)) #0 Sun Sep 6 16:19:39 2020
  2. [ 0.000000] CPU0 revision is: 00019740 (MIPS 74Kc)
  3. [ 0.000000] bcm47xx: Using bcma bus
  4. [ 0.000000] (NULL device *): bus0: Found chip with id 0x4716, rev 0x01 and package 0x0A
  5. [ 0.000000] Determined physical RAM map:
  6. [ 0.000000] memory: 04000000 @ 00000000 (usable)
  7. [ 0.000000] Initrd not found or empty - disabling initrd
  8. [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  9. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  10. [ 0.000000] Zone ranges:
  11. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
  12. [ 0.000000] Movable zone start for each node
  13. [ 0.000000] Early memory node ranges
  14. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
  15. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
  16. [ 0.000000] On node 0 totalpages: 16384
  17. [ 0.000000] free_area_init_node: node 0, pgdat 804686c0, node_mem_map 81000020
  18. [ 0.000000] Normal zone: 128 pages used for memmap
  19. [ 0.000000] Normal zone: 0 pages reserved
  20. [ 0.000000] Normal zone: 16384 pages, LIFO batch:3
  21. [ 0.000000] random: get_random_bytes called from 0x8046b738 with crng_init=0
  22. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  23. [ 0.000000] pcpu-alloc: [0] 0
  24. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256
  25. [ 0.000000] Kernel command line: noinitrd console=ttyS0,115200
  26. [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  27. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  28. [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  29. [ 0.000000] Writing ErrCtl register=00000000
  30. [ 0.000000] Readback ErrCtl register=00000000
  31. [ 0.000000] Memory: 59872K/65536K available (3893K kernel code, 156K rwdata, 464K rodata, 212K init, 280K bss, 5664K reserved, 0K cma-reserved)
  32. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  33. [ 0.000000] NR_IRQS: 128
  34. [ 0.000000] (NULL device *): bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x1F, class 0x0)
  35. [ 0.000000] (NULL device *): bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x11, class 0x0)
  36. [ 0.000000] (NULL device *): bus0: Core 2 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x00, class 0x0)
  37. [ 0.000000] (NULL device *): bus0: Core 3 found: MIPS 74K (manuf 0x4A7, id 0x82C, rev 0x01, class 0x0)
  38. [ 0.000000] (NULL device *): bus0: Core 4 found: USB 2.0 Host (manuf 0x4BF, id 0x819, rev 0x04, class 0x0)
  39. [ 0.000000] (NULL device *): bus0: Core 5 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0E, class 0x0)
  40. [ 0.000000] (NULL device *): bus0: Core 6 found: DDR1/DDR2 Memory Controller (manuf 0x4BF, id 0x82E, rev 0x01, class 0x0)
  41. [ 0.000000] (NULL device *): bus0: Core 7 found: Internal Memory (manuf 0x4BF, id 0x80E, rev 0x07, class 0x0)
  42. [ 0.000000] (NULL device *): bus0: Core 8 found: I2S (manuf 0x4BF, id 0x834, rev 0x00, class 0x0)
  43. [ 0.000000] (NULL device *): bus0: Found rev 5 PMU (capabilities 0x11242C05)
  44. [ 0.000000] (NULL device *): bus0: Found parallel flash
  45. [ 0.000000] (NULL device *): bus0: Early bus registered
  46. [ 0.000000] MIPS: machine is Linksys E3000 V1
  47. [ 0.000000] bcm47xx: Setting up vectored interrupts
  48. [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7963585194 ns
  49. [ 0.000016] sched_clock: 32 bits at 240MHz, resolution 4ns, wraps every 8947848189ns
  50. [ 0.000126] Calibrating delay loop... 239.61 BogoMIPS (lpj=1198080)
  51. [ 0.070044] pid_max: default: 32768 minimum: 301
  52. [ 0.070451] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  53. [ 0.070492] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  54. [ 0.074315] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  55. [ 0.074369] futex hash table entries: 256 (order: -1, 3072 bytes)
  56. [ 0.075710] NET: Registered protocol family 16
  57. [ 0.106569] clocksource: Switched to clocksource MIPS
  58. [ 0.108937] NET: Registered protocol family 2
  59. [ 0.110610] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  60. [ 0.110671] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  61. [ 0.110712] TCP: Hash tables configured (established 1024 bind 1024)
  62. [ 0.110977] UDP hash table entries: 256 (order: 0, 4096 bytes)
  63. [ 0.111037] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  64. [ 0.111482] NET: Registered protocol family 1
  65. [ 0.111584] PCI: CLS 0 bytes, default 32
  66. [ 0.165146] (NULL device *): bus0: Using SPROM revision 8 provided by platform.
  67. [ 0.165175] (NULL device *): bus0: PMU resource config unknown or not needed for device 0x4716
  68. [ 0.167244] (NULL device *): bus0: Workarounds unknown or not needed for device 0x4716
  69. [ 0.167262] (NULL device *): bus0: Initializing MIPS core...
  70. [ 0.167277] (NULL device *): bus0: Moved i2s interrupt to oob line 7 instead of 8
  71. [ 0.167299] (NULL device *): bus0: set_irq: core 0x0812, irq 3 => 3
  72. [ 0.167317] (NULL device *): bus0: set_irq: core 0x082d, irq 4 => 4
  73. [ 0.167333] (NULL device *): bus0: set_irq: core 0x0819, irq 5 => 5
  74. [ 0.167350] (NULL device *): bus0: set_irq: core 0x0820, irq 6 => 6
  75. [ 0.167367] (NULL device *): bus0: set_irq: core 0x0800, irq 2 => 2
  76. [ 0.167384] (NULL device *): bus0: set_irq: core 0x0834, irq 0 => 2
  77. [ 0.167394] (NULL device *): bus0: IRQ reconfiguration done
  78. [ 0.167404] bcma: core 0x0800, irq :
  79. [ 0.167414] 2(S)*
  80. [ 0.167422] 3
  81. [ 0.167445] 4
  82. [ 0.167460] 5
  83. [ 0.167475] 6
  84. [ 0.167489] D
  85. [ 0.167504] I
  86. [ 0.167517]
  87. [ 0.167540] bcma: core 0x0812, irq :
  88. [ 0.167548] 2(S)
  89. [ 0.167555] 3*
  90. [ 0.167570] 4
  91. [ 0.167585] 5
  92. [ 0.167599] 6
  93. [ 0.167613] D
  94. [ 0.167628] I
  95. [ 0.167641]
  96. [ 0.167665] bcma: core 0x082d, irq :
  97. [ 0.167672] 2(S)
  98. [ 0.167680] 3
  99. [ 0.167694] 4*
  100. [ 0.167709] 5
  101. [ 0.167723] 6
  102. [ 0.167738] D
  103. [ 0.167752] I
  104. [ 0.167766]
  105. [ 0.167789] bcma: core 0x082c, irq :
  106. [ 0.167796] 2(S)
  107. [ 0.167803] 3
  108. [ 0.167818] 4
  109. [ 0.167833] 5
  110. [ 0.167847] 6
  111. [ 0.167861] D
  112. [ 0.167876] I*
  113. [ 0.167889]
  114. [ 0.167913] bcma: core 0x0819, irq :
  115. [ 0.167920] 2(S)
  116. [ 0.167927] 3
  117. [ 0.167942] 4
  118. [ 0.167957] 5*
  119. [ 0.167971] 6
  120. [ 0.167985] D
  121. [ 0.168000] I
  122. [ 0.168013]
  123. [ 0.168037] bcma: core 0x0820, irq :
  124. [ 0.168045] 2(S)
  125. [ 0.168052] 3
  126. [ 0.168067] 4
  127. [ 0.168081] 5
  128. [ 0.168095] 6*
  129. [ 0.168110] D
  130. [ 0.168124] I
  131. [ 0.168138]
  132. [ 0.168161] bcma: core 0x082e, irq :
  133. [ 0.168169] 2(S)
  134. [ 0.168176] 3
  135. [ 0.168191] 4
  136. [ 0.168205] 5
  137. [ 0.168220] 6
  138. [ 0.168234] D*
  139. [ 0.168248] I
  140. [ 0.168262]
  141. [ 0.168285] bcma: core 0x080e, irq :
  142. [ 0.168292] 2(S)
  143. [ 0.168299] 3
  144. [ 0.168314] 4
  145. [ 0.168328] 5
  146. [ 0.168343] 6
  147. [ 0.168357] D
  148. [ 0.168371] I*
  149. [ 0.168385]
  150. [ 0.168408] bcma: core 0x0834, irq :
  151. [ 0.168416] 2(S)*
  152. [ 0.168423] 3
  153. [ 0.168438] 4
  154. [ 0.168452] 5
  155. [ 0.168466] 6
  156. [ 0.168481] D
  157. [ 0.168495] I
  158. [ 0.168509]
  159. [ 0.168537] (NULL device *): bus0: PCIEcore in host mode found
  160. [ 0.371906] PCI host bridge to bus 0000:00
  161. [ 0.371964] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0bffffff]
  162. [ 0.371995] pci_bus 0000:00: root bus resource [io 0x0100-0x07ff]
  163. [ 0.372024] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
  164. [ 0.372055] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  165. [ 0.372146] pci 0000:00:00.0: [14e4:4716] type 00 class 0x060000
  166. [ 0.372181] bcma: PCI: Fixing up bridge 0000:00:00.0
  167. [ 0.372205] bcma: PCI: Fixing up device 0000:00:00.0
  168. [ 0.372283] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
  169. [ 0.372315] pci 0000:00:00.0: reg 0x18: [mem 0x00000000-0x07ffffff 64bit]
  170. [ 0.372355] pci 0000:00:00.0: enabling Extended Tags
  171. [ 0.372478] pci 0000:00:00.0: supports D1 D2
  172. [ 0.372899] pci 0000:00:00.1: [14e4:0000] type 00 class 0x060000
  173. [ 0.372935] bcma: PCI: Fixing up bridge 0000:00:00.1
  174. [ 0.372969] bcma: PCI: Fixing up device 0000:00:00.1
  175. [ 0.373042] pci 0000:00:00.1: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
  176. [ 0.373074] pci 0000:00:00.1: reg 0x18: [mem 0x00000000-0x07ffffff 64bit]
  177. [ 0.373114] pci 0000:00:00.1: enabling Extended Tags
  178. [ 0.373231] pci 0000:00:00.1: supports D1 D2
  179. [ 0.373674] pci 0000:00:01.0: [14e4:4322] type 00 class 0x028000
  180. [ 0.373793] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
  181. [ 0.373910] pci 0000:00:01.0: enabling Extended Tags
  182. [ 0.373954] bcma: PCI: Fixing up addresses 0000:00:01.0
  183. [ 0.374003] pci 0000:00:01.0: BAR 0: assigned [mem 0x08000000-0x08003fff 64bit]
  184. [ 0.374217] pci 0000:00:01.0: supports D1 D2
  185. [ 0.374641] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
  186. [ 0.374822] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
  187. [ 0.374856] bcma: PCI: Fixing up device 0000:00:01.0
  188. [ 0.426619] ssb: Found chip with id 0x4322, rev 0x01 and package 0x0A
  189. [ 0.426673] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x17, vendor 0x4243)
  190. [ 0.426698] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x10, vendor 0x4243)
  191. [ 0.426722] ssb: Core 2 found: PCI-E (cc 0x820, rev 0x0B, vendor 0x4243)
  192. [ 0.426746] ssb: Core 3 found: PCI (cc 0x804, rev 0x0E, vendor 0x4243)
  193. [ 0.426770] ssb: Core 4 found: USB 2.0 Device (cc 0x81A, rev 0x05, vendor 0x4243)
  194. [ 0.426793] ssb: Core 5 found: UNKNOWN (cc 0x8FF, rev 0x00, vendor 0x4243)
  195. [ 0.426816] ssb: Core 6 found: Internal Memory (cc 0x80E, rev 0x03, vendor 0x4243)
  196. [ 0.486605] ssb: chipcommon status is 0x68040
  197. [ 0.486629] ssb: Found rev 2 PMU (capabilities 0x04583002)
  198. [ 0.486650] ssb: SPROM offset is 0x1000
  199. [ 0.520437] ssb: Using SPROM revision 8 provided by platform
  200. [ 0.697650] ssb: Sonics Silicon Backplane found on PCI device 0000:00:01.0
  201. [ 0.699358] (NULL device *): bus0: Bus registered
  202. [ 0.700732] Crashlog allocated RAM at address 0x3f00000
  203. [ 0.709519] workingset: timestamp_bits=30 max_order=14 bucket_order=0
  204. [ 0.719117] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  205. [ 0.719154] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  206. [ 0.739795] io scheduler noop registered
  207. [ 0.739834] io scheduler deadline registered (default)
  208. [ 0.740380] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  209. [ 0.744633] console [ttyS0] disabled
  210. [ 0.764904] serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 2, base_baud = 1250000) is a U6_16550A
  211. [ 1.442261] console [ttyS0] enabled
  212. [ 1.447392] physmap platform flash device: 02000001 at 1c000000
  213. [ 1.453524] physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0000cb
  214. [ 1.463971] physmap-flash.0: Found an alias at 0x800000 for the chip at 0x0
  215. [ 1.463993] physmap-flash.0: Found an alias at 0x1000000 for the chip at 0x0
  216. [ 1.464012] physmap-flash.0: Found an alias at 0x1800000 for the chip at 0x0
  217. [ 1.464038] Amd/Fujitsu Extended Query Table at 0x0040
  218. [ 1.469338] Amd/Fujitsu Extended Query version 1.1.
  219. [ 1.474488] number of CFI chips: 1
  220. [ 1.522526] 3 bcm47xxpart partitions found on MTD device physmap-flash.0
  221. [ 1.529398] Creating 3 MTD partitions on "physmap-flash.0":
  222. [ 1.535081] 0x000000000000-0x000000040000 : "boot"
  223. [ 1.545876] 0x000000040000-0x0000007f0000 : "firmware"
  224. [ 1.552712] 3 trx partitions found on MTD device firmware
  225. [ 1.558319] Creating 3 MTD partitions on "firmware":
  226. [ 1.563392] 0x00000000001c-0x000000000944 : "loader"
  227. [ 1.573144] 0x000000000944-0x000000179000 : "linux"
  228. [ 1.580655] 0x000000179000-0x0000007b0000 : "rootfs"
  229. [ 1.587287] mtd: device 4 (rootfs) set to be root filesystem
  230. [ 1.593098] 1 squashfs-split partitions found on MTD device rootfs
  231. [ 1.599501] 0x000000410000-0x0000007b0000 : "rootfs_data"
  232. [ 1.610601] 0x0000007f0000-0x000000800000 : "nvram"
  233. [ 1.622926] libphy: Fixed MDIO Bus: probed
  234. [ 1.627668] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds)
  235. [ 1.635534] GPIO_WDT: failed to register misc device
  236. [ 1.642666] NET: Registered protocol family 10
  237. [ 1.655319] Segment Routing with IPv6
  238. [ 1.659360] NET: Registered protocol family 17
  239. [ 1.664013] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  240. [ 1.677262] 8021q: 802.1Q VLAN Support v1.8
  241. [ 1.691642] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
  242. [ 1.700296] Freeing unused kernel memory: 212K
  243. [ 1.704829] This architecture does not have kernel memory protection.
  244. [ 2.503841] init: Console is alive
  245. [ 2.507886] init: - watchdog -
  246. [ 2.556594] random: fast init done
  247. [ 3.773070] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  248. [ 3.923760] usbcore: registered new interface driver usbfs
  249. [ 3.929651] usbcore: registered new interface driver hub
  250. [ 3.935259] usbcore: registered new device driver usb
  251. [ 3.950046] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  252. [ 3.959455] ehci-platform: EHCI generic platform driver
  253. [ 3.964938] ehci-platform ehci-platform.0: EHCI Host Controller
  254. [ 3.971161] ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1
  255. [ 3.979638] ehci-platform ehci-platform.0: irq 5, io mem 0x18004000
  256. [ 4.006641] ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00
  257. [ 4.014795] hub 1-0:1.0: USB hub found
  258. [ 4.019522] hub 1-0:1.0: 2 ports detected
  259. [ 4.029919] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  260. [ 4.038210] ohci-platform: OHCI generic platform driver
  261. [ 4.043699] ohci-platform ohci-platform.0: Generic Platform OHCI controller
  262. [ 4.050956] ohci-platform ohci-platform.0: new USB bus registered, assigned bus number 2
  263. [ 4.059376] ohci-platform ohci-platform.0: irq 5, io mem 0x18009000
  264. [ 4.132375] hub 2-0:1.0: USB hub found
  265. [ 4.137167] hub 2-0:1.0: 2 ports detected
  266. [ 4.149423] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  267. [ 4.168151] init: - preinit -
  268. [ 5.762880] random: jshn: uninitialized urandom read (4 bytes read)
  269. [ 5.936105] random: jshn: uninitialized urandom read (4 bytes read)
  270. [ 6.058723] random: jshn: uninitialized urandom read (4 bytes read)
  271. [ 9.978107] jffs2: notice: (392) jffs2_build_xattr_subsystem: complete building xattr subsystem, 20 of xdatum (3 unchecked, 17 orphan) and 60 of xref (23 dead, 5 orphan) found.
  272. [ 9.997674] mount_root: switching to jffs2 overlay
  273. [ 10.042793] overlayfs: upper fs does not support tmpfile.
  274. [ 10.058611] urandom-seed: Seeding with /etc/urandom.seed
  275. [ 10.200599] procd: - early -
  276. [ 10.203790] procd: - watchdog -
  277. [ 10.944182] procd: - watchdog -
  278. [ 10.948333] procd: - ubus -
  279. [ 11.044508] urandom_read: 1 callbacks suppressed
  280. [ 11.044522] random: ubusd: uninitialized urandom read (4 bytes read)
  281. [ 11.058553] random: ubusd: uninitialized urandom read (4 bytes read)
  282. [ 11.065783] random: ubusd: uninitialized urandom read (4 bytes read)
  283. [ 11.074627] procd: - init -
  284. [ 12.747466] urngd: v1.0.2 started.
  285. [ 13.084616] random: crng init done
  286. [ 13.088194] random: 3 urandom warning(s) missed due to ratelimiting
  287. [ 13.248054] kmodloader: loading kernel modules from /etc/modules.d/*
  288. [ 13.284310] ip6_tables: (C) 2000-2006 Netfilter Core Team
  289. [ 13.342784] Loading modules backported from Linux version v4.19.137-0-gc076c79e03c6
  290. [ 13.350692] Backport generated by backports.git v4.19.137-1-0-g60c3a249
  291. [ 13.384342] ip_tables: (C) 2000-2006 Netfilter Core Team
  292. [ 13.417943] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
  293. [ 13.628185] xt_time: kernel timezone is -0000
  294. [ 13.638576] bgmac_bcma bcma0:2: Found PHY addr: 30 (NOREGS)
  295. [ 13.801972] b53_common: found switch: BCM53115, rev 8
  296. [ 13.807351] libphy: bcma_mdio mii bus: probed
  297. [ 13.811807] bgmac_bcma bcma0:2: Support for Roboswitch not implemented
  298. [ 13.948546] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
  299. [ 14.290873] PPP generic driver version 2.4.2
  300. [ 14.318477] NET: Registered protocol family 24
  301. [ 15.604740] brcmsmac bcma0:1: mfg 4bf core 812 rev 17 class 0 irq 3
  302. [ 15.613078] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  303. [ 15.827137] usbcore: registered new interface driver rt2800usb
  304. [ 16.042755] kmodloader: done loading kernel modules from /etc/modules.d/*
  305. [ 30.217971] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  306. [ 30.276880] br-lan: port 1(eth0.1) entered blocking state
  307. [ 30.282388] br-lan: port 1(eth0.1) entered disabled state
  308. [ 30.288576] device eth0.1 entered promiscuous mode
  309. [ 30.293472] device eth0 entered promiscuous mode
  310. [ 30.407142] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  311. [ 31.287248] bgmac_bcma bcma0:2 eth0: Link is Up - 1Gbps/Full - flow control off
  312. [ 31.294773] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  313. [ 31.366457] br-lan: port 1(eth0.1) entered blocking state
  314. [ 31.372057] br-lan: port 1(eth0.1) entered forwarding state
  315. [ 31.427499] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  316. [ 35.576126] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
  317. [ 35.584390] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
  318. [ 35.595522] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  319. [ 35.617513] br-lan: port 2(wlan0) entered blocking state
  320. [ 35.622940] br-lan: port 2(wlan0) entered disabled state
  321. [ 35.629038] device wlan0 entered promiscuous mode
  322. [ 42.351219] device wlan0 left promiscuous mode
  323. [ 42.355949] br-lan: port 2(wlan0) entered disabled state
  324. [ 42.480806] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
  325. [ 42.489065] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
  326. [ 42.498494] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  327. [ 42.589752] br-lan: port 2(wlan0) entered blocking state
  328. [ 42.595179] br-lan: port 2(wlan0) entered disabled state
  329. [ 42.601230] device wlan0 entered promiscuous mode
  330.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement