SHARE
TWEET

Tyre change log 5/26/2019

a guest May 26th, 2019 91 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [2019-05-26 21:56:02] [Output] : ★ Anna Pohl bends down to touch her toes, then moves to the rear of the 86
  2. [2019-05-26 21:56:20] [Output] : ★ Anna Pohl opens the rear hatch revealing a folded down back seat
  3. [2019-05-26 21:56:42] [Output] : ★ there would be 4 rims and 4 tyres in the car      ((Anna Pohl))
  4. [2019-05-26 21:56:53] [Output] : ★ Anna Pohl starts taking out the items one by one
  5. [2019-05-26 21:58:17] [Output] : ★ Anna Pohl sets them down by the tyre changer
  6. [2019-05-26 21:59:22] [Output] : ★ Anna Pohl sets one of the rims on the machine
  7. [2019-05-26 22:00:37] [Output] : ★ Anna Pohl takes one of the tyres and spreads a dollup of dry soap on the bead
  8. [2019-05-26 22:01:31] [Output] : ★ Anna Pohl sets the tyre atop the rim and turns it applying downward force
  9. [2019-05-26 22:01:56] [Output] : ★ the lower bead would run over the upper lip of the rim      ((Anna Pohl))
  10. [2019-05-26 22:02:44] [Output] : ★ Anna Pohl lowers the alignment tongue of the machine onto the wheel/tyre assembly into place
  11. [2019-05-26 22:03:26] [Output] : ★ Anna Pohl steps on the pedal to make the assembly start rotating on the machine
  12. [2019-05-26 22:03:57] [Output] : ★ guiding the tyre along until the upper bead runs over the upper lip of the rim      ((Anna Pohl))
  13. [2019-05-26 22:04:10] [Output] : ★ Anna Pohl releases the pedal
  14. [2019-05-26 22:04:24] [Output] : ★ the wheel assembly would release from the machine      ((Anna Pohl))
  15. [2019-05-26 22:08:39] [Output] : ★ Anna Pohl would take the assembled wheel and tyre combe off the horisontal bed of the machine
  16. [2019-05-26 22:10:36] [Output] : ★ Anna Pohl sets the assembly down to the side for the moment, as shed take rim #2 and put it on the
  17. [2019-05-26 22:10:40] [Output] : ★ tyre changer      ((Anna Pohl))
  18. [2019-05-26 22:11:03] [Output] : ★ Anna Pohl presses the pedal to lock the rim in place on the machine
  19. [2019-05-26 22:11:35] [Output] : ★ Anna Pohl takes another dollup of dry soap and smears it on the beads of tyre #2
  20. [2019-05-26 22:12:01] [Output] : ★ Anna Pohl sets the tyre atop the rim and starts wiggling it on the rim applying downward force
  21. [2019-05-26 22:12:42] [Output] : ★ the lower bead of the tyre would roll over the upper lip of the rim      ((Anna Pohl))
  22. [2019-05-26 22:13:07] [Output] : ★ Anna Pohl then lowers the bead setting assist arm onto the assembly
  23. [2019-05-26 22:13:57] [Output] : ★ Anna Pohl steps on the pedal to make the assembly rotate on the machine, guiding the tyre along
  24. [2019-05-26 22:14:16] [Output] : ★ until the top bead of the tyre runs over the top lip of the rim      ((Anna Pohl))
  25. [2019-05-26 22:14:36] [Output] : ★ Anna Pohl moves the bead setting assist lever away from the combo
  26. [2019-05-26 22:15:19] [Output] : ★ Anna Pohl steps on the pedal to release the newly assembled tyre/wheel assembly
  27. [2019-05-26 22:15:36] [Output] : ★ Anna Pohl turns it vertical and inspects the bead of the tyre
  28. [2019-05-26 22:16:06] [Output] : ★ Anna Pohl sets the assembly down by the first one
  29. [2019-05-26 22:16:24] [Output] : Anna Pohl: (( /me refuses to write this out 2 more times, sorrow) ))
  30. [2019-05-26 22:17:12] [Output] : ★ there would now be four wheel and tyre assemblies with no balancing or air in them      ((Anna Pohl))
  31. [2019-05-26 22:28:29] [Output] : ★ Anna Pohl walks up to the compressor, grabs the hose with a pump attatchment on it
  32. [2019-05-26 22:28:38] [Output] : ★ Anna Pohl walks back to the assembly
  33. [2019-05-26 22:29:21] [Output] : ★ Anna Pohl uncaps the air valve on one of the wheel assemblies and attatches the pump
  34. [2019-05-26 22:29:36] [Output] : ★ Anna Pohl depresses the trigger on the pump
  35. [2019-05-26 22:29:50] [Output] : ★ air would start rushing into the wheel/tyre assembly      ((Anna Pohl))
  36. [2019-05-26 22:30:00] [Output] : ★ Anna Pohl would keep an eye on the gauge on the pump
  37. [2019-05-26 22:30:17] [Output] : ★ Anna Pohl would stop before the needle on the gauge reaches the correct pressure
  38. [2019-05-26 22:30:34] [Output] : ★ Anna Pohl would then repeatedly depress the trigger to get the air inside up to pressure
  39. [2019-05-26 22:30:54] [Output] : ★ Anna Pohl takes the pumps nozzle off the valve
  40. [2019-05-26 22:31:05] [Output] : ★ Anna Pohl caps the valve on the wheel
  41. [2019-05-26 22:31:22] [Output] : Anna Pohl: (( Again I would repeat the process 3 more times ensuring correct pressure ))
  42. [2019-05-26 22:31:57] [Output] : ★ there would now be 4 wheel/tyre assemblies that are balanced and filled with air next to the      ((Anna Pohl))
  43. [2019-05-26 22:17:53] [Output] : ★ Anna Pohl takes one of the assemblies and sets it on the wheel balancer shaft of the trye changer
  44. [2019-05-26 22:18:15] [Output] : ★ Anna Pohl takes the lock nut and screws it onto the shaft to lock the wheel assembly onto the balancer
  45. [2019-05-26 22:18:36] [Output] : ★ Anna Pohl runs the assembly around a few times by hand to ensure proper seating
  46. [2019-05-26 22:19:11] [Output] : ★ Anna Pohl turns on the balancer DRO and lowers the safety shroud onto the wheel assembly
  47. [2019-05-26 22:19:29] [Output] : ★ Anna Pohl presses the button to run the balance test on the wheel
  48. [2019-05-26 22:20:03] [Output] : ★ the wheel would start spinning on the machine slowly, rotate a bunch of times, then come to      ((Anna Pohl))
  49. [2019-05-26 22:20:07] [Output] : ★ a stop slowly      ((Anna Pohl))
  50. [2019-05-26 22:20:26] [Output] : ★ the machine would beep, indicating a succsessful test      ((Anna Pohl))
  51. [2019-05-26 22:20:40] [Output] : ★ Anna Pohl takes a a look at the DRO
  52. [2019-05-26 22:21:06] [Output] :  [English] Anna Pohl says: Okay, 15 grams on this side and 45 on the other
  53. [2019-05-26 22:21:33] [Output] : ★ Anna Pohl grabs a wheel weight labelled 15 from the box atop the balancer
  54. [2019-05-26 22:21:50] [Output] : ★ Anna Pohl also grabs a rubber mallet that is atop the balancer
  55. [2019-05-26 22:22:06] [Output] : ★ Anna Pohl lifts the safety shroud and starts rotating the wheel, looking at the DRO
  56. [2019-05-26 22:22:27] [Output] : ★ the machine would beep indicating correcto positioning for the wheel weight      ((Anna Pohl))
  57. 2019-05-26 22:23:36] [Output] : ★ Anna Pohl places the wheel weight on the side that needed 15 grams and gently taps it on with the
  58. [2019-05-26 22:23:43] [Output] : ★ rubber mallet      ((Anna Pohl))
  59. [2019-05-26 22:24:03] [Output] : ★ Anna Pohl would then press on the button to change readout to the other side of the wheel
  60. [2019-05-26 22:24:28] [Output] : ★ Anna Pohl spins the assembly around again until the machine beeps indicating correct position
  61. [2019-05-26 22:25:02] [Output] : ★ Anna Pohl takes two weights, one 20, the other 25 and sets them onto the wheel, estimating the center
  62. [2019-05-26 22:25:21] [Output] : ★ Anna Pohl then taps them gently into place with the rubber mallet
  63. [2019-05-26 22:25:31] [Output] : ★ Anna Pohl sets down the mallet atop the balancer
  64. [2019-05-26 22:25:59] [Output] : ★ Anna Pohl presses a button to run the balancing test again
  65. [2019-05-26 22:26:27] [Output] : ★ the wheel would slowly start spinning, get up to speed, rotate a number of times, then come      ((Anna Pohl))
  66. [2019-05-26 22:26:31] [Output] : ★ a stop slowly      ((Anna Pohl))
  67. [2019-05-26 22:26:50] [Output] : ★ the balancer would beep to indicate a succsessful test      ((Anna Pohl))
  68. [2019-05-26 22:26:56] [Output] : ★ Anna Pohl takes a look at the DRO
  69. [2019-05-26 22:27:05] [Output] :  [English] Anna Pohl says: Spot on, nice!
  70. [2019-05-26 22:31:22] [Output] : Anna Pohl: (( Again I would repeat the process 3 more times ensuring correct pressure ))
  71. [2019-05-26 22:31:57] [Output] : ★ there would now be 4 wheel/tyre assemblies that are balanced and filled with air next to the      ((Anna Pohl))
  72. [2019-05-26 22:32:00] [Output] : ★ balancer      ((Anna Pohl))
  73. [2019-05-26 22:32:41] [Output] : ★ Anna Pohl walks up to the ae86 that would now parked between the towers of the lift
  74. [2019-05-26 22:33:03] [Output] : ★ Anna Pohl starts going around the car placing the four arms of the lift under the pickup points
  75. [2019-05-26 22:33:09] [Output] : ★ of the car      ((Anna Pohl))
  76. [2019-05-26 22:33:30] [Output] : ★ Anna Pohl gets up and moves to the button to raise the car
  77. [2019-05-26 22:33:41] [Output] : ★ Anna Pohl would stop just as the arms connect with the pickup points
  78. [2019-05-26 22:33:56] [Output] : ★ Anna Pohl goes around the car making sure the arms connect in the right place
  79. [2019-05-26 22:34:19] [Output] : ★ Anna Pohl walks back to the button and raises the vehicle to hip height
  80. [2019-05-26 22:34:47] [Output] : ★ Anna Pohl grabs the air gun that would lie beside the lift and be connected to the compressor
  81. [2019-05-26 22:35:43] [Output] : ★ Anna Pohl moves to the FR wheel, places the air wrench' socket on one of the lug nuts and presses the
  82. [2019-05-26 22:35:54] [Output] : ★ trigger to undo the nut      ((Anna Pohl))
  83. [2019-05-26 22:36:06] [Output] : ★ Anna Pohl would repeat the process 5 more times on the wheel
  84. [2019-05-26 22:36:32] [Output] : ★ Anna Pohl would repeat the general process on the 4 remaining wheels pocketing all the lug nuts
  85. [2019-05-26 22:36:57] [Output] : Anna Pohl: (( /me starts going around the car cautiousley removing all the wheels one by wone ))
  86. [2019-05-26 22:37:13] [Output] : ★ Anna Pohl starts going around the car removing all the wheels one by one
  87. [2019-05-26 22:37:23] [Output] : ★ setting them down by the posts of the lift      ((Anna Pohl))
  88. [2019-05-26 22:37:39] [Output] : ★ Anna Pohl goes to the balancer and starts rolling the new wheels closer to the car
  89. [2019-05-26 22:37:47] [Output] : ★ Anna Pohl finishes moving the wheel assemblies
  90. [2019-05-26 22:38:22] [Output] : ★ Anna Pohl starts placing the wheels onto the car one after the other securing them temporarily in plac
  91. [2019-05-26 22:38:41] [Output] : ★ place by screwing on a few of the nuts onto the studs by hand      ((Anna Pohl))
  92. [2019-05-26 22:39:09] [Output] : ★ Anna Pohl would then go around the car screwing on the rest of the nuts by hand
  93.                                
  94. [2019-05-26 22:39:26] [Output] : ★ Anna Pohl then reaches for her torque wrench
  95. [2019-05-26 22:40:24] [Output] : ★ Anna Pohl starts going around the vehicle tightening all the nuts up to spec,
  96. [2019-05-26 22:40:26] [Output] : ★ The torque wrench would click as it reaches set torque
  97.  
  98. [2019-05-26 22:41:11] [Output] : ★ Anna Pohl sets down the air gun, and goes around the vehicle inspecting her work
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top