Advertisement
Guest User

Untitled

a guest
Jun 25th, 2017
482
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 15.84 KB | None | 0 0
  1. Texas Instruments X-Loader 1.41 (Aug 16 2010 - 17:25:31)
  2. Starting OS Bootloader from NAND ...
  3.  
  4.  
  5. U-Boot 1.1.4-gbbf7b94a (Aug 16 2010 - 17:23:54)
  6.  
  7. OMAP3630-GP rev 1, CPU-OPP2 L3-200MHz
  8. OMAP36XX SDP # 1.0 Version + mDDR (Boot NAND)
  9. DRAM: 512 MB
  10. Flash: 128 MB
  11. NAND:512 MiB
  12. Muxed OneNAND 256MB 1.8V 16-bit (0x40)
  13. Scanning device for bad blocks
  14. num of blocks = 4096
  15. Bad eraseblock 855 at 0x06ae0000
  16. Bad eraseblock 901 at 0x070a0000
  17. Bad eraseblock 2037 at 0x0fea0000
  18.  
  19.  
  20. In: serial
  21. Out: serial
  22. Err: serial
  23. Battery levels: main 3575 mV, backup 2906 mV
  24. Hit any key to stop autoboot: 0
  25.  
  26. Warning: MAC addresses don't match:
  27. HW MAC address: 00:80:EE:03:12:0D
  28. "ethaddr" value: 08:00:28:01:4D:B6
  29. Using MAC Address 08:00:28:01:4D:B6
  30. TFTP from server 10.24.244.190; our IP address is 10.24.244.222
  31. Filename 'govindraj/uImage'.
  32. Load address: 0x80300000
  33. Loading: #################################################################
  34. #################################################################
  35. #################################################################
  36. #################################################################
  37. #################################################################
  38. #################################################################
  39. #################################################################
  40. #################################################################
  41. ########################################
  42. done
  43. Bytes transferred = 2866168 (2bbbf8 hex)
  44. ## Booting image at 80300000 ...
  45. Image Name: Linux-2.6.36-rc7-13271-ge0bcaca
  46. Image Type: ARM Linux Kernel Image (uncompressed)
  47. Data Size: 2866104 Bytes = 2.7 MB
  48. Load Address: 80008000
  49. Entry Point: 80008000
  50. Verifying Checksum ... OK
  51. OK
  52.  
  53. Starting kernel ...
  54.  
  55. Uncompressing Linux... done, booting the kernel.
  56. [ 0.000000] Linux version 2.6.36-rc7-13271-ge0bcaca (govindraj@Linux-BSP-Server) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #272 SMP Mon Nov 8 13:10:47 IST 2010
  57. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
  58. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  59. [ 0.000000] Machine: OMAP 3630SDP board
  60. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  61. [ 0.000000] OMAP3630 ES1.0 (l2cache iva sgx neon isp 192mhz_clk )
  62. [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000
  63. [ 0.000000] PERCPU: Embedded 7 pages/cpu @c0f24000 s5984 r8192 d14496 u65536
  64. [ 0.000000] pcpu-alloc: s5984 r8192 d14496 u65536 alloc=16*4096
  65. [ 0.000000] pcpu-alloc: [0] 0
  66. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
  67. [ 0.000000] Kernel command line: console=ttyO0,115200n8=noinitrd root=/dev/nfs rw nfsroot=10.24.244.190:/rootfs/govindraj/mfs1_lat,nolock,tcp,wsize=1024,rsize=1024 ip=dhcp devfs=mount earlyprintk
  68. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  69. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  70. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  71. [ 0.000000] Memory: 256MB 256MB = 512MB total
  72. [ 0.000000] Memory: 508360k/508360k available, 15928k reserved, 0K highmem
  73. [ 0.000000] Virtual kernel memory layout:
  74. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  75. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  76. [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  77. [ 0.000000] vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB)
  78. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  79. [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  80. [ 0.000000] .init : 0xc0008000 - 0xc004b000 ( 268 kB)
  81. [ 0.000000] .text : 0xc004b000 - 0xc0534000 (5028 kB)
  82. [ 0.000000] .data : 0xc0558000 - 0xc05c2be0 ( 427 kB)
  83. [ 0.000000] Hierarchical RCU implementation.
  84. [ 0.000000] RCU-based detection of stalled CPUs is disabled.
  85. [ 0.000000] Verbose stalled-CPUs detection is disabled.
  86. [ 0.000000] NR_IRQS:402
  87. [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
  88. [ 0.000000] Reprogramming SDRC clock to 400000000 Hz
  89. [ 0.000000] GPMC revision 5.0
  90. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
  91. [ 0.000000] Total of 96 interrupts on 1 active controller
  92. [ 0.000000] Could not get gpios_ick
  93. [ 0.000000] Could not get gpios_fck
  94. [ 0.000000] OMAP GPIO hardware version 2.5
  95. [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
  96. [ 0.000000] Console: colour dummy device 80x30
  97. [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
  98. [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
  99. [ 0.000000] ... MAX_LOCK_DEPTH: 48
  100. [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
  101. [ 0.000000] ... CLASSHASH_SIZE: 4096
  102. [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
  103. [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
  104. [ 0.000000] ... CHAINHASH_SIZE: 16384
  105. [ 0.000000] memory used by lock dependency info: 3695 kB
  106. [ 0.000000] per task-struct memory footprint: 1152 bytes
  107. [ 0.000000] Calibrating delay loop... 597.64 BogoMIPS (lpj=2334720)
  108. [ 0.000000] pid_max: default: 32768 minimum: 301
  109. [ 0.000000] Security Framework initialized
  110. [ 0.000000] Mount-cache hash table entries: 512
  111. [ 0.000000] CPU: Testing write buffer coherency: ok
  112. [ 0.000000] Brought up 1 CPUs
  113. [ 0.000000] SMP: Total of 1 processors activated (597.64 BogoMIPS).
  114. [ 0.000000] regulator: core version 0.5
  115. [ 0.000000] NET: Registered protocol family 16
  116. [ 0.000000] OMAP DMA hardware revision 5.0
  117. [ 0.045410] bio: create slab <bio-0> at 0
  118. [ 0.052429] SCSI subsystem initialized
  119. [ 0.058135] usbcore: registered new interface driver usbfs
  120. [ 0.059082] usbcore: registered new interface driver hub
  121. [ 0.059814] usbcore: registered new device driver usb
  122. [ 0.062042] omap_device: i2c_omap.1: new worst case activate latency 0: 91552
  123. [ 0.062347] i2c_omap i2c_omap.1: bus 1 rev4.0 at 2400 kHz
  124. [ 0.071624] twl4030: PIH (irq 7) chaining IRQs 368..375
  125. [ 0.071746] twl4030: power (irq 373) chaining IRQs 376..383
  126. [ 0.073364] twl4030: gpio (irq 368) chaining IRQs 384..401
  127. [ 0.084564] regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
  128. [ 0.087005] regulator: VMMC2: 1850 mV normal standby
  129. [ 0.089080] regulator: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby
  130. [ 0.089447] omap_device: i2c_omap.1: new worst case deactivate latency 0: 30517
  131. [ 0.089691] i2c_omap i2c_omap.2: bus 2 rev4.0 at 400 kHz
  132. [ 0.100952] i2c_omap i2c_omap.3: bus 3 rev4.0 at 400 kHz
  133. [ 0.108703] Switching to clocksource 32k_counter
  134. [ 0.188354] NET: Registered protocol family 2
  135. [ 0.189056] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  136. [ 0.190765] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  137. [ 0.191375] TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
  138. [ 0.201141] TCP: Hash tables configured (established 16384 bind 16384)
  139. [ 0.201232] TCP reno registered
  140. [ 0.201293] UDP hash table entries: 256 (order: 2, 20480 bytes)
  141. [ 0.201599] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
  142. [ 0.202575] NET: Registered protocol family 1
  143. [ 0.203796] RPC: Registered udp transport module.
  144. [ 0.203826] RPC: Registered tcp transport module.
  145. [ 0.203826] RPC: Registered tcp NFSv4.1 backchannel transport module.
  146. [ 0.208801] NetWinder Floating Point Emulator V0.97 (double precision)
  147. [ 0.362365] VFS: Disk quotas dquot_6.5.2
  148. [ 0.362640] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  149. [ 0.364929] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  150. [ 0.366088] msgmni has been set to 992
  151. [ 0.370147] io scheduler noop registered
  152. [ 0.370147] io scheduler deadline registered
  153. [ 0.370422] io scheduler cfq registered (default)
  154. [ 0.374176] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  155. [ 0.379791] omap-hsuart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
  156. [ 0.959808] console [ttyO0] enabled
  157. [ 0.964874] omap-hsuart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
  158. [ 0.973663] omap-hsuart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
  159. [ 0.982269] omap-hsuart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3
  160. [ 1.020050] brd: module loaded
  161. [ 1.037963] loop: module loaded
  162. [ 1.049346] mtdoops: mtd device (mtddev=name/number) must be supplied
  163. [ 1.056732] omap2-nand driver initializing
  164. [ 1.061492] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron omap2-nand.0)
  165. [ 1.069580] NAND bus width 8 instead 16 bit
  166. [ 1.074005] No NAND device found.
  167. [ 1.077636] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron NAND 512MiB 1,8V 16-bit)
  168. [ 1.086761] Creating 5 MTD partitions on "omap2-nand.0":
  169. [ 1.092315] 0x000000000000-0x000000080000 : "X-Loader-NAND"
  170. [ 1.105255] 0x000000080000-0x0000001c0000 : "U-Boot-NAND"
  171. [ 1.115875] 0x0000001c0000-0x000000280000 : "Boot Env-NAND"
  172. [ 1.126464] 0x000000280000-0x000000780000 : "Kernel-NAND"
  173. [ 1.138641] 0x000000780000-0x000020000000 : "File System - NAND"
  174. [ 1.379272] OneNAND driver initializing
  175. [ 1.383819] omap2-onenand omap2-onenand: initializing on CS1, phys base 0x20000000, virtual base e08c0000
  176. [ 1.393951] Muxed OneNAND 256MB 1.8V 16-bit (0x40)
  177. [ 1.398986] OneNAND version = 0x0121
  178. [ 1.404357] Scanning device for bad blocks
  179. [ 1.459594] onenand_bbt_wait: ecc error = 0x2222, controller error 0x2400
  180. [ 1.466735] Bad eraseblock 855 at 0x06ae0000
  181. [ 1.473937] onenand_bbt_wait: ecc error = 0x2222, controller error 0x2400
  182. [ 1.481140] Bad eraseblock 901 at 0x070a0000
  183. [ 1.552581] onenand_bbt_wait: ecc error = 0x2222, controller error 0x2400
  184. [ 1.559722] Bad eraseblock 2037 at 0x0fea0000
  185. [ 1.564941] Creating 5 MTD partitions on "omap2-onenand":
  186. [ 1.570648] 0x000000000000-0x000000080000 : "X-Loader-OneNAND"
  187. [ 1.581207] 0x000000080000-0x0000000c0000 : "U-Boot-OneNAND"
  188. [ 1.591400] 0x0000000c0000-0x0000000e0000 : "U-Boot Environment-OneNAND"
  189. [ 1.602966] 0x0000000e0000-0x0000002e0000 : "Kernel-OneNAND"
  190. [ 1.613586] 0x0000002e0000-0x000010000000 : "File System-OneNAND"
  191. [ 1.641998] smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <nico@fluxnic.net>
  192. [ 1.652404] eth0: SMC91C94 (rev 9) at e0884300 IRQ 318 [nowait]
  193. [ 1.658782] eth0: Ethernet addr: 08:00:28:01:4d:b6
  194. [ 1.665496] usbcore: registered new interface driver asix
  195. [ 1.671600] usbcore: registered new interface driver cdc_ether
  196. [ 1.678375] usbcore: registered new interface driver net1080
  197. [ 1.684936] usbcore: registered new interface driver cdc_subset
  198. [ 1.691711] usbcore: registered new interface driver zaurus
  199. [ 1.699676] usbcore: registered new interface driver cdc_wdm
  200. [ 1.705718] Initializing USB Mass Storage driver...
  201. [ 1.711425] usbcore: registered new interface driver usb-storage
  202. [ 1.717742] USB Mass Storage support registered.
  203. [ 1.723724] usbcore: registered new interface driver libusual
  204. [ 1.730407] usbcore: registered new interface driver usbtest
  205. [ 1.736419] udc: OMAP UDC driver, version: 4 October 2004 (iso) (dma)
  206. [ 1.746765] mice: PS/2 mouse device common for all mice
  207. [ 1.754791] input: TWL4030 Keypad as /devices/platform/omap/i2c_omap.1/i2c-1/1-004a/twl4030_keypad/input/input0
  208. [ 1.774749] input: twl4030_pwrbutton as /devices/platform/omap/i2c_omap.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1
  209. [ 1.789581] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
  210. [ 1.796264] twl_rtc twl_rtc: Power up reset detected.
  211. [ 1.802490] twl_rtc twl_rtc: Enabling TWL-RTC.
  212. [ 1.808715] i2c /dev entries driver
  213. [ 1.816558] Driver for 1-wire Dallas network protocol.
  214. [ 1.823699] omap_device: omap_wdt.-1: new worst case activate latency 0: 30517
  215. [ 1.832885] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
  216. [ 1.839385] omap_device: omap_wdt.-1: new worst case deactivate latency 0: 30517
  217. [ 1.848083] twl4030_wdt twl4030_wdt: Failed to register misc device
  218. [ 1.854949] twl4030_wdt: probe of twl4030_wdt failed with error -16
  219. [ 1.877319] usbcore: registered new interface driver usbhid
  220. [ 1.883300] usbhid: USB HID core driver
  221. [ 1.887329] oprofile: hardware counters not available
  222. [ 1.892669] oprofile: using timer interrupt.
  223. [ 1.897705] TCP cubic registered
  224. [ 1.901184] Initializing XFRM netlink socket
  225. [ 1.905792] NET: Registered protocol family 17
  226. [ 1.910736] NET: Registered protocol family 15
  227. [ 1.915893] Registering the dns_resolver key type
  228. [ 1.921356] ThumbEE CPU extension supported.
  229. [ 1.933410] Power Management for TI OMAP3.
  230. [ 1.966583] clock: disabling unused clocks to save power
  231. [ 1.972595] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  232. [ 1.987396] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
  233. [ 2.179992] mmc1: new high speed MMC card at address 0001
  234. [ 2.187835] mmcblk0: mmc1:0001 STM16G 14.8 GiB
  235. [ 2.199188] mmcblk0: unknown partition table
  236. [ 2.502227] eth0: link up
  237. [ 3.508666] Sending DHCP requests ., OK
  238. [ 3.523803] IP-Config: Got DHCP answer from 0.0.0.0, my address is 10.24.244.79
  239. [ 3.532806] IP-Config: Complete:
  240. [ 3.536010] device=eth0, addr=10.24.244.79, mask=255.255.255.0, gw=10.24.244.1,
  241. [ 3.544158] host=10.24.244.79, domain=, nis-domain=(none),
  242. [ 3.550415] bootserver=0.0.0.0, rootserver=10.24.244.190, rootpath=
  243. [ 3.560546] Looking up port of RPC 100003/2 on 10.24.244.190
  244. [ 3.573822] Looking up port of RPC 100005/1 on 10.24.244.190
  245. [ 3.598480] VFS: Mounted root (nfs filesystem) on device 0:13.
  246. [ 3.604919] Freeing init memory: 268K
  247. Mounting proc : OK
  248. Mounting sysfs : OK
  249. Mounting /dev : OK
  250. Creating local mdev devices
  251. umount: can't umount /mnt/mmc: Invalid argument
  252.  
  253. ******************************************
  254. Starting System Init for 12.2
  255. Release: 12.2
  256. ******************************************
  257. Saving kernel ring buffer : OK
  258. Mounting devpts : OK
  259. Setting up networking
  260. Configuring lo : OK
  261. Configuring eth0 : OK - 10.24.244.79
  262. Starting telnetd : OK
  263. Starting syslogd : OK
  264. Starting klogd : OK
  265. Mounting filesystems : OK
  266.  
  267. Please press Enter to activate this console.
  268. / #
  269. / #
  270. / #
  271. / # echo mem > /sys/power/state
  272. [ 193.157531] PM: Syncing filesystems ... done.
  273. [ 193.182342] Freezing user space processes ... (elapsed 0.01 seconds) done.
  274. [ 193.205993] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
  275. [ 193.238342] Suspending console(s) (use no_console_suspend to debug)
  276. [ 193.339721] PM: suspend of devices complete after 91.064 msecs
  277. [ 193.341369] omap_device: i2c_omap.1: new worst case deactivate latency 0: 152587
  278. [ 193.341461] PM: late suspend of devices complete after 1.739 msecs
  279. [ 193.341552] Disabling non-boot CPUs ...
  280. [ 193.342346] omap_device: omap-hsuart.2: new worst case deactivate latency 0: 61035
  281. [ 194.323913] omap_device: omap-hsuart.0: new worst case activate latency 0: 30517
  282. [ 194.324005] Successfully put all powerdomains to target state
  283. [ 194.324523] PM: early resume of devices complete after 0.335 msecs
  284. [ 194.416809] PM: resume of devices complete after 91.918 msecs
  285. [ 194.420074] omap_device: omap_wdt.-1: new worst case deactivate latency 0: 183105
  286. [ 194.488403] Restarting tasks ... done.
  287. / #
  288. / #
  289. / # echo mem > /sys/power/state
  290. [ 205.920562] PM: Syncing filesystems ... done.
  291. [ 205.973297] Freezing user space processes ... (elapsed 0.02 seconds) done.
  292. [ 206.000915] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
  293. [ 206.032745] Suspending console(s) (use no_console_suspend to debug)
  294. [ 206.121368] PM: suspend of devices complete after 78.399 msecs
  295. [ 206.122772] PM: late suspend of devices complete after 1.403 msecs
  296. [ 206.122802] Disabling non-boot CPUs ...
  297. [ 209.442504] Successfully put all powerdomains to target state
  298. [ 209.443054] PM: early resume of devices complete after 0.396 msecs
  299. [ 209.532714] PM: resume of devices complete after 89.477 msecs
  300. [ 209.572387] Restarting tasks ... done.
  301. / #
  302. / #
  303. / #
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement