Guest User

suspend-resume

a guest
Sep 1st, 2019
124
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Bash 15.83 KB | None | 0 0
  1. Sep  1 21:49:39 Blizlac kernel: <38>[  199.606089] elogind-daemon[2839]: Suspending system...
  2. Sep  1 21:49:39 Blizlac kernel: elogind-daemon[2839]: Suspending system...
  3. Sep  1 21:49:39 Blizlac kernel: PM: suspend entry (deep)
  4. Sep  1 21:49:39 Blizlac kernel: [  199.606107] PM: suspend entry (deep)
  5. Sep  1 21:49:39 Blizlac kernel: PM: Syncing filesystems ... done.
  6. Sep  1 21:49:39 Blizlac kernel: [  199.606109] PM: Syncing filesystems ... done.
  7. Sep  1 21:50:07 Blizlac kernel: Freezing user space processes ... (elapsed 0.001 seconds) done.
  8. Sep  1 21:50:07 Blizlac kernel: OOM killer disabled.
  9. Sep  1 21:50:07 Blizlac kernel: Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
  10. Sep  1 21:50:07 Blizlac kernel: Suspending console(s) (use no_console_suspend to debug)
  11. Sep  1 21:50:07 Blizlac kernel: e1000e: EEE TX LPI TIMER: 00000011
  12. Sep  1 21:50:07 Blizlac kernel: sd 1:0:0:0: [sda] Synchronizing SCSI cache
  13. Sep  1 21:50:07 Blizlac kernel: sd 1:0:0:0: [sda] Stopping disk
  14. Sep  1 21:50:07 Blizlac kernel: ACPI: Preparing to enter system sleep state S3
  15. Sep  1 21:50:07 Blizlac kernel: PM: Saving platform NVS memory
  16. Sep  1 21:50:07 Blizlac kernel: Disabling non-boot CPUs ...
  17. Sep  1 21:50:07 Blizlac dhcpcd[3504]: eno2: carrier lost
  18. Sep  1 21:50:07 Blizlac kernel: [  199.989969] Freezing user space processes ... (elapsed 0.001 seconds) done.
  19. Sep  1 21:50:07 Blizlac kernel: [  199.991237] OOM killer disabled.
  20. Sep  1 21:50:07 Blizlac kernel: [  199.991237] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
  21. Sep  1 21:50:07 Blizlac kernel: [  199.992216] Suspending console(s) (use no_console_suspend to debug)
  22. Sep  1 21:50:07 Blizlac kernel: [  199.993458] e1000e: EEE TX LPI TIMER: 00000011
  23. Sep  1 21:50:07 Blizlac kernel: [  200.006084] sd 1:0:0:0: [sda] Synchronizing SCSI cache
  24. Sep  1 21:50:07 Blizlac kernel: [  200.008063] sd 1:0:0:0: [sda] Stopping disk
  25. Sep  1 21:50:07 Blizlac kernel: [  200.818004] ACPI: Preparing to enter system sleep state S3
  26. Sep  1 21:50:07 Blizlac kernel: [  201.186908] PM: Saving platform NVS memory
  27. Sep  1 21:50:07 Blizlac kernel: [  201.186930] Disabling non-boot CPUs ...
  28. Sep  1 21:50:07 Blizlac kernel: [  201.193642] smpboot: CPU 1 is now offline
  29. Sep  1 21:50:07 Blizlac kernel: [  201.201597] IRQ 128: no longer affine to CPU2
  30. Sep  1 21:50:07 Blizlac kernel: [  201.202673] smpboot: CPU 2 is now offline
  31. Sep  1 21:50:07 Blizlac kernel: [  201.212615] IRQ 129: no longer affine to CPU3
  32. Sep  1 21:50:07 Blizlac kernel: [  201.213673] smpboot: CPU 3 is now offline
  33. Sep  1 21:50:07 Blizlac kernel: [  201.220620] IRQ 130: no longer affine to CPU4
  34. Sep  1 21:50:07 Blizlac kernel: smpboot: CPU 1 is now offline
  35. Sep  1 21:50:07 Blizlac kernel: IRQ 128: no longer affine to CPU2
  36. Sep  1 21:50:07 Blizlac kernel: smpboot: CPU 2 is now offline
  37. Sep  1 21:50:07 Blizlac kernel: IRQ 129: no longer affine to CPU3
  38. Sep  1 21:50:07 Blizlac kernel: smpboot: CPU 3 is now offline
  39. Sep  1 21:50:07 Blizlac kernel: IRQ 130: no longer affine to CPU4
  40. Sep  1 21:50:07 Blizlac kernel: smpboot: CPU 4 is now offline
  41. Sep  1 21:50:07 Blizlac kernel: IRQ 131: no longer affine to CPU5
  42. Sep  1 21:50:07 Blizlac kernel: smpboot: CPU 5 is now offline
  43. Sep  1 21:50:07 Blizlac kernel: ACPI: Low-level resume complete
  44. Sep  1 21:50:07 Blizlac bluetoothd[3564]: Endpoint unregistered: sender=:1.55 path=/MediaEndpoint/A2DPSource
  45. Sep  1 21:50:07 Blizlac bluetoothd[3564]: Endpoint unregistered: sender=:1.55 path=/MediaEndpoint/A2DPSink
  46. Sep  1 21:50:07 Blizlac kernel: [  201.221676] smpboot: CPU 4 is now offline
  47. Sep  1 21:50:07 Blizlac kernel: [  201.227609] IRQ 131: no longer affine to CPU5
  48. Sep  1 21:50:07 Blizlac kernel: [  201.228662] smpboot: CPU 5 is now offline
  49. Sep  1 21:50:07 Blizlac kernel: [  201.233337] ACPI: Low-level resume complete
  50. Sep  1 21:50:07 Blizlac kernel: [  201.233426] PM: Restoring platform NVS memory
  51. Sep  1 21:50:07 Blizlac kernel: PM: Restoring platform NVS memory
  52. Sep  1 21:50:07 Blizlac kernel: Enabling non-boot CPUs ...
  53. Sep  1 21:50:07 Blizlac kernel: x86: Booting SMP configuration:
  54. Sep  1 21:50:07 Blizlac kernel: smpboot: Booting Node 0 Processor 1 APIC 0x2
  55. Sep  1 21:50:07 Blizlac kernel:  cache: parent cpu1 should not be sleeping
  56. Sep  1 21:50:07 Blizlac kernel: CPU1 is up
  57. Sep  1 21:50:07 Blizlac kernel: smpboot: Booting Node 0 Processor 2 APIC 0x4
  58. Sep  1 21:50:07 Blizlac kernel:  cache: parent cpu2 should not be sleeping
  59. Sep  1 21:50:07 Blizlac kernel: CPU2 is up
  60. Sep  1 21:50:07 Blizlac kernel: smpboot: Booting Node 0 Processor 3 APIC 0x6
  61. Sep  1 21:50:07 Blizlac kernel: [  201.234318] Enabling non-boot CPUs ...
  62. Sep  1 21:50:07 Blizlac kernel: [  201.234332] x86: Booting SMP configuration:
  63. Sep  1 21:50:07 Blizlac kernel: [  201.234333] smpboot: Booting Node 0 Processor 1 APIC 0x2
  64. Sep  1 21:50:07 Blizlac kernel: [  201.234802]  cache: parent cpu1 should not be sleeping
  65. Sep  1 21:50:07 Blizlac kernel: [  201.235044] CPU1 is up
  66. Sep  1 21:50:07 Blizlac kernel:  cache: parent cpu3 should not be sleeping
  67. Sep  1 21:50:07 Blizlac kernel: CPU3 is up
  68. Sep  1 21:50:07 Blizlac kernel: smpboot: Booting Node 0 Processor 4 APIC 0x8
  69. Sep  1 21:50:07 Blizlac kernel:  cache: parent cpu4 should not be sleeping
  70. Sep  1 21:50:07 Blizlac kernel: CPU4 is up
  71. Sep  1 21:50:07 Blizlac kernel: smpboot: Booting Node 0 Processor 5 APIC 0xa
  72. Sep  1 21:50:07 Blizlac kernel:  cache: parent cpu5 should not be sleeping
  73. Sep  1 21:50:07 Blizlac kernel: CPU5 is up
  74. Sep  1 21:50:07 Blizlac kernel: ACPI: Waking up from system sleep state S3
  75. Sep  1 21:50:07 Blizlac kernel: usb usb1: root hub lost power or was reset
  76. Sep  1 21:50:07 Blizlac kernel: [  201.235052] smpboot: Booting Node 0 Processor 2 APIC 0x4
  77. Sep  1 21:50:07 Blizlac kernel: [  201.235543]  cache: parent cpu2 should not be sleeping
  78. Sep  1 21:50:07 Blizlac kernel: [  201.235867] CPU2 is up
  79. Sep  1 21:50:07 Blizlac kernel: [  201.235875] smpboot: Booting Node 0 Processor 3 APIC 0x6
  80. Sep  1 21:50:07 Blizlac kernel: [  201.236362]  cache: parent cpu3 should not be sleeping
  81. Sep  1 21:50:07 Blizlac kernel: usb usb2: root hub lost power or was reset
  82. Sep  1 21:50:07 Blizlac kernel: sd 1:0:0:0: [sda] Starting disk
  83. Sep  1 21:50:07 Blizlac kernel: usb usb3: root hub lost power or was reset
  84. Sep  1 21:50:07 Blizlac kernel: usb usb4: root hub lost power or was reset
  85. Sep  1 21:50:07 Blizlac kernel: ata4: SATA link down (SStatus 4 SControl 300)
  86. Sep  1 21:50:07 Blizlac kernel: ata3: SATA link down (SStatus 4 SControl 300)
  87. Sep  1 21:50:07 Blizlac kernel: ata1: SATA link down (SStatus 4 SControl 300)
  88. Sep  1 21:50:07 Blizlac kernel: usb 1-11: reset full-speed USB device number 3 using xhci_hcd
  89. Sep  1 21:50:07 Blizlac kernel: iwlwifi 0000:00:14.3: BIOS contains WGDS but no WRDS
  90. Sep  1 21:50:07 Blizlac kernel: usb 1-4: reset full-speed USB device number 2 using xhci_hcd
  91. Sep  1 21:50:07 Blizlac kernel: [  201.236706] CPU3 is up
  92. Sep  1 21:50:07 Blizlac kernel: [  201.236713] smpboot: Booting Node 0 Processor 4 APIC 0x8
  93. Sep  1 21:50:07 Blizlac kernel: [  201.237189]  cache: parent cpu4 should not be sleeping
  94. Sep  1 21:50:07 Blizlac kernel: [  201.237461] CPU4 is up
  95. Sep  1 21:50:07 Blizlac kernel: [  201.237469] smpboot: Booting Node 0 Processor 5 APIC 0xa
  96. Sep  1 21:50:07 Blizlac kernel: [  201.237910]  cache: parent cpu5 should not be sleeping
  97. Sep  1 21:50:07 Blizlac kernel: [  201.238131] CPU5 is up
  98. Sep  1 21:50:07 Blizlac kernel: usb 1-14: reset full-speed USB device number 4 using xhci_hcd
  99. Sep  1 21:50:07 Blizlac kernel: ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  100. Sep  1 21:50:07 Blizlac kernel: ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
  101. Sep  1 21:50:07 Blizlac kernel: ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
  102. Sep  1 21:50:07 Blizlac kernel: ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
  103. Sep  1 21:50:07 Blizlac kernel: ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
  104. Sep  1 21:50:07 Blizlac kernel: ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
  105. Sep  1 21:50:07 Blizlac kernel: ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
  106. Sep  1 21:50:07 Blizlac kernel: ata2.00: configured for UDMA/133
  107. Sep  1 21:50:07 Blizlac kernel: acpi LNXPOWER:04: Turning OFF
  108. Sep  1 21:50:07 Blizlac kernel: [  201.241204] ACPI: Waking up from system sleep state S3
  109. Sep  1 21:50:07 Blizlac kernel: [  202.317046] usb usb1: root hub lost power or was reset
  110. Sep  1 21:50:07 Blizlac kernel: OOM killer enabled.
  111. Sep  1 21:50:07 Blizlac kernel: Restarting tasks ... done.
  112. Sep  1 21:50:07 Blizlac kernel: Bluetooth: hci0: Firmware revision 0.1 build 216 week 27 2019
  113. Sep  1 21:50:07 Blizlac kernel: [  202.317049] usb usb2: root hub lost power or was reset
  114. Sep  1 21:50:07 Blizlac kernel: [  202.326873] sd 1:0:0:0: [sda] Starting disk
  115. Sep  1 21:50:07 Blizlac kernel: [  202.337001] usb usb3: root hub lost power or was reset
  116. Sep  1 21:50:07 Blizlac kernel: [  202.337002] usb usb4: root hub lost power or was reset
  117. Sep  1 21:50:07 Blizlac kernel: [  202.636656] ata4: SATA link down (SStatus 4 SControl 300)
  118. Sep  1 21:50:07 Blizlac kernel: [  202.636714] ata3: SATA link down (SStatus 4 SControl 300)
  119. Sep  1 21:50:07 Blizlac kernel: [  202.636788] ata1: SATA link down (SStatus 4 SControl 300)
  120. Sep  1 21:50:07 Blizlac kernel: [  202.642117] usb 1-11: reset full-speed USB device number 3 using xhci_hcd
  121. Sep  1 21:50:07 Blizlac kernel: [  202.882216] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
  122. Sep  1 21:50:07 Blizlac kernel: [  203.122220] usb 1-14: reset full-speed USB device number 4 using xhci_hcd
  123. Sep  1 21:50:07 Blizlac kernel: [  204.196131] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  124. Sep  1 21:50:07 Blizlac kernel: [  204.208198] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
  125. Sep  1 21:50:07 Blizlac kernel: [  204.208202] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
  126. Sep  1 21:50:07 Blizlac kernel: [  204.279882] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
  127. Sep  1 21:50:07 Blizlac kernel: [  204.279886] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
  128. Sep  1 21:50:07 Blizlac kernel: [  204.317121] ata2.00: configured for UDMA/133
  129. Sep  1 21:50:07 Blizlac kernel: [  204.340415] acpi LNXPOWER:04: Turning OFF
  130. Sep  1 21:50:07 Blizlac kernel: [  204.340486] OOM killer enabled.
  131. Sep  1 21:50:07 Blizlac kernel: [  204.340487] Restarting tasks ... done.
  132. Sep  1 21:50:07 Blizlac kernel: [  204.343923] Bluetooth: hci0: Firmware revision 0.1 build 216 week 27 2019
  133. Sep  1 21:50:07 Blizlac kernel: [  204.346740] video LNXVIDEO:00: Restoring backlight state
  134. Sep  1 21:50:07 Blizlac kernel: [  204.346761] PM: suspend exit
  135. Sep  1 21:50:07 Blizlac kernel: <38>[  204.346776] elogind-daemon[2839]: System resumed.
  136. Sep  1 21:50:07 Blizlac kernel: video LNXVIDEO:00: Restoring backlight state
  137. Sep  1 21:50:07 Blizlac kernel: PM: suspend exit
  138. Sep  1 21:50:07 Blizlac kernel: elogind-daemon[2839]: System resumed.
  139. Sep  1 21:50:07 Blizlac dhcpcd[3504]: eno2: deleting route to 192.168.1.0/24
  140. Sep  1 21:50:07 Blizlac dhcpcd[3504]: eno2: deleting default route via 192.168.1.1
  141. Sep  1 21:50:07 Blizlac kernel: e1000e: eno2 NIC Link is Down
  142. Sep  1 21:50:07 Blizlac kernel: [  204.463384] e1000e: eno2 NIC Link is Down
  143. Sep  1 21:50:07 Blizlac kernel: IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
  144. Sep  1 21:50:07 Blizlac kernel: [  204.475420] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
  145. Sep  1 21:50:07 Blizlac kernel: IPv6: ADDRCONF(NETDEV_UP): eno2: link is not ready
  146. Sep  1 21:50:07 Blizlac kernel: [  204.478920] IPv6: ADDRCONF(NETDEV_UP): eno2: link is not ready
  147. Sep  1 21:50:07 Blizlac nm-dispatcher[4863]: req:1 'down' [eno2]: new request (1 scripts)
  148. Sep  1 21:50:07 Blizlac nm-dispatcher[4863]: req:1 'down' [eno2]: start running ordered scripts...
  149. Sep  1 21:50:07 Blizlac nm-dispatcher[4863]: req:2 'connectivity-change': new request (1 scripts)
  150. Sep  1 21:50:07 Blizlac dhcpcd[3504]: wlo1: new hardware address: d4:3b:04:4a:45:89
  151. Sep  1 21:50:07 Blizlac kernel: [  204.687446] IPv6: ADDRCONF(NETDEV_UP): eno2: link is not ready
  152. Sep  1 21:50:07 Blizlac kernel: IPv6: ADDRCONF(NETDEV_UP): eno2: link is not ready
  153. Sep  1 21:50:07 Blizlac kernel: IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
  154. Sep  1 21:50:07 Blizlac kernel: [  204.690904] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
  155. Sep  1 21:50:07 Blizlac kernel: IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
  156. Sep  1 21:50:07 Blizlac kernel: [  204.767223] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
  157. Sep  1 21:50:07 Blizlac bluetoothd[3564]: Endpoint registered: sender=:1.55 path=/MediaEndpoint/A2DPSource
  158. Sep  1 21:50:07 Blizlac bluetoothd[3564]: Endpoint registered: sender=:1.55 path=/MediaEndpoint/A2DPSink
  159. Sep  1 21:50:08 Blizlac kernel: [  206.211493] e1000e: eno2 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
  160. Sep  1 21:50:08 Blizlac kernel: [  206.211501] e1000e 0000:00:1f.6 eno2: 10/100 speed: disabling TSO
  161. Sep  1 21:50:08 Blizlac kernel: [  206.211658] IPv6: ADDRCONF(NETDEV_CHANGE): eno2: link becomes ready
  162. Sep  1 21:50:08 Blizlac dhcpcd[3504]: eno2: carrier acquired
  163. Sep  1 21:50:08 Blizlac kernel: e1000e: eno2 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
  164. Sep  1 21:50:08 Blizlac kernel: e1000e 0000:00:1f.6 eno2: 10/100 speed: disabling TSO
  165. Sep  1 21:50:08 Blizlac kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eno2: link becomes ready
  166. Sep  1 21:50:08 Blizlac dhclient[4942]: DHCPREQUEST for 192.168.1.104 on eno2 to 255.255.255.255 port 67
  167. Sep  1 21:50:08 Blizlac dhclient[4942]: DHCPACK of 192.168.1.104 from 192.168.1.1
  168. Sep  1 21:50:08 Blizlac dhcpcd[3504]: eno2: IAID c2:c5:95:d1
  169. Sep  1 21:50:08 Blizlac dhcpcd[3504]: eno2: adding address fe80::4d81:7096:44b5:539d
  170. Sep  1 21:50:08 Blizlac nm-dispatcher[4863]: req:3 'up' [eno2]: new request (1 scripts)
  171. Sep  1 21:50:08 Blizlac nm-dispatcher[4863]: req:4 'connectivity-change': new request (1 scripts)
  172. Sep  1 21:50:09 Blizlac dhclient[4942]: bound to 192.168.1.104 -- renewal in 39114 seconds.
  173. Sep  1 21:50:09 Blizlac start-stop-daemon[4982]: Will stop /usr/bin/distccd
  174. Sep  1 21:50:09 Blizlac start-stop-daemon[4982]: Will stop PID 3654
  175. Sep  1 21:50:09 Blizlac start-stop-daemon[4982]: Sending signal 15 to PID 3654
  176. Sep  1 21:50:09 Blizlac start-stop-daemon[5008]: Will stop processes owned by UID 201
  177. Sep  1 21:50:09 Blizlac start-stop-daemon[5008]: Sending signal 15 to PID 3535
  178. Sep  1 21:50:09 Blizlac nm-dispatcher[4863]: req:2 'connectivity-change': start running ordered scripts...
  179. Sep  1 21:50:09 Blizlac /etc/init.d/NetworkManager[5053]: status: inactive
  180. Sep  1 21:50:09 Blizlac nm-dispatcher[4863]: req:3 'up' [eno2]: start running ordered scripts...
  181. Sep  1 21:50:09 Blizlac /etc/init.d/NetworkManager[5068]: status: inactive
  182. Sep  1 21:50:09 Blizlac /etc/init.d/NetworkManager[5088]: status: inactive
  183. Sep  1 21:50:09 Blizlac nm-dispatcher[4863]: req:4 'connectivity-change': start running ordered scripts...
  184. Sep  1 21:50:09 Blizlac start-stop-daemon[5178]: pam_unix(start-stop-daemon:session): session opened for user bitlbee by (uid=0)
  185. Sep  1 21:50:09 Blizlac dhcpcd[3504]: eno2: soliciting an IPv6 router
  186. Sep  1 21:50:09 Blizlac ModemManager[3255]: <info>  Couldn't check support for device '/sys/devices/pci0000:00/0000:00:14.3': not supported by any plugin
  187. Sep  1 21:50:09 Blizlac ModemManager[3255]: <info>  Couldn't check support for device '/sys/devices/pci0000:00/0000:00:1f.6': not supported by any plugin
  188. Sep  1 21:50:09 Blizlac dhcpcd[3504]: eno2: rebinding lease of 192.168.1.104
  189. Sep  1 21:50:09 Blizlac dhcpcd[3504]: eno2: leased 192.168.1.104 for 86400 seconds
  190. Sep  1 21:50:09 Blizlac dhcpcd[3504]: eno2: adding route to 192.168.1.0/24
  191. Sep  1 21:50:09 Blizlac dhcpcd[3504]: eno2: adding default route via 192.168.1.1
  192. Sep  1 21:50:22 Blizlac dhcpcd[3504]: eno2: no IPv6 Routers available
  193. Sep  1 21:51:49 Blizlac dhcpcd[3504]: wlo1: new hardware address: 72:36:3e:5b:ab
Add Comment
Please, Sign In to add comment