johnvick

Untitled

Nov 7th, 2016
113
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [ 0.000000] [c0] Booting Linux on physical CPU 0x100
  2. [ 0.000000] [c0] Initializing cgroup subsys cpuset
  3. [ 0.000000] [c0] Initializing cgroup subsys cpu
  4. [ 0.000000] [c0] Initializing cgroup subsys cpuacct
  5. [ 0.000000] [c0] Linux version 3.10.104+ (root@odroid-wheezy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP PREEMPT Wed Oct 26 16:17:46 CEST 2016
  6. [ 0.000000] [c0] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
  7. [ 0.000000] [c0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  8. [ 0.000000] [c0] Machine: ODROID-XU3, model: Hardkernel odroid-xu3 board based on EXYNOS5422
  9. [ 0.000000] [c0] ION: Contiguous 0x6650000 bytes @ 0x0 defined for 0:common
  10. [ 0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 2:mfc_sh
  11. [ 0.000000] [c0] ION: Contiguous 0x800000 bytes @ 0x0 defined for 10:g2d_wfd
  12. [ 0.000000] [c0] ION: Contiguous 0x6000000 bytes @ 0x0 defined for 11:video
  13. [ 0.000000] [c0] ION: Contiguous 0x1000000 bytes @ 0x0 defined for 7:mfc_input
  14. [ 0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 9:sectbl
  15. [ 0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 8:mfc_fw
  16. [ 0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 12:mfc_nfw
  17. [ 0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 13:secdma
  18. [ 0.000000] [c0] cma: CMA: reserved 104 MiB at b8000000
  19. [ 0.000000] [c0] cma: CMA: reserved 4 MiB at b7c00000
  20. [ 0.000000] [c0] cma: CMA: reserved 8 MiB at b7400000
  21. [ 0.000000] [c0] cma: CMA: reserved 96 MiB at b1400000
  22. [ 0.000000] [c0] cma: CMA: reserved 16 MiB at b0400000
  23. [ 0.000000] [c0] cma: CMA: reserved 4 MiB at b0000000
  24. [ 0.000000] [c0] cma: CMA: reserved 4 MiB at afc00000
  25. [ 0.000000] [c0] cma: CMA: reserved 4 MiB at af800000
  26. [ 0.000000] [c0] cma: CMA: reserved 4 MiB at af400000
  27. [ 0.000000] [c0] cma: CMA: reserved 256 MiB at 5f800000
  28. [ 0.000000] [c0] Memory policy: ECC disabled, Data cache writealloc
  29. [ 0.000000] [c0] create_mapping_memory: section: 40000000 ~ 6f800000
  30. [ 0.000000] [c0] CPU EXYNOS5422 (id 0xe5422001)
  31. [ 0.000000] [c0] On node 0 totalpages: 518656
  32. [ 0.000000] [c0] free_area_init_node: node 0, pgdat c0988340, node_mem_map c0df9000
  33. [ 0.000000] [c0] Normal zone: 1520 pages used for memmap
  34. [ 0.000000] [c0] Normal zone: 0 pages reserved
  35. [ 0.000000] [c0] Normal zone: 194560 pages, LIFO batch:31
  36. [ 0.000000] [c0] HighMem zone: 2532 pages used for memmap
  37. [ 0.000000] [c0] HighMem zone: 324096 pages, LIFO batch:31
  38. [ 0.000000] [c0] PERCPU: Embedded 9 pages/cpu @c1e07000 s14912 r8192 d13760 u36864
  39. [ 0.000000] [c0] pcpu-alloc: s14912 r8192 d13760 u36864 alloc=9*4096
  40. [ 0.000000] [c0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
  41. [ 0.000000] [c0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517136
  42. [ 0.000000] [c0] Kernel command line: console=tty1 root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro fsck.repair=yes drm_kms_helper.edid_firmware=edid/1920x1080.bin smsc95xx.macaddr=00:1e:06:61:7a:72 governor=performance hdmi_tx_amp_lvl=31 hdmi_tx_lvl_ch0=3 hdmi_tx_lvl_ch1=3 hdmi_tx_lvl_ch2=3 hdmi_tx_emp_lvl=6 hdmi_clk_amp_lvl=31 hdmi_tx_res=0 HPD=true vout=hdmi
  43. [ 0.000000] [c0] hdmi: using HDMI Mode
  44. [ 0.000000] [c0] PID hash table entries: 4096 (order: 2, 16384 bytes)
  45. [ 0.000000] [c0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  46. [ 0.000000] [c0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  47. [ 0.000000] [c0] allocated 4149248 bytes of page_cgroup
  48. [ 0.000000] [c0] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  49. [ 0.000000] [c0] Memory: 2026MB = 2026MB total
  50. [ 0.000000] [c0] Memory: 1522196k/1522196k available, 552428k reserved, 1046528K highmem
  51. [ 0.000000] [c0] Virtual kernel memory layout:
  52. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  53. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  54. vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  55. lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  56. pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  57. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  58. .text : 0xc0008000 - 0xc08acffc (8852 kB)
  59. .init : 0xc08ad000 - 0xc0917a40 ( 427 kB)
  60. .data : 0xc0918000 - 0xc098ebb8 ( 475 kB)
  61. .bss : 0xc098ebb8 - 0xc0df8d78 (4521 kB)
  62. [ 0.000000] [c0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  63. [ 0.000000] [c0] Preemptible hierarchical RCU implementation.
  64. [ 0.000000] [c0] NR_IRQS:16 nr_irqs:16 16
  65. [ 0.000000] [c0] apll 800000000
  66. [ 0.000000] [c0] bpll 825000000
  67. [ 0.000000] [c0] cpll 666000000
  68. [ 0.000000] [c0] dpll 600000000
  69. [ 0.000000] [c0] epll 180633609
  70. [ 0.000000] [c0] rpll 66000000
  71. [ 0.000000] [c0] ipll 432000000
  72. [ 0.000000] [c0] spll 800000000
  73. [ 0.000000] [c0] dout_spll_ctrl_div2 400000000
  74. [ 0.000000] [c0] vpll 400000000
  75. [ 0.000000] [c0] mpll 532000000
  76. [ 0.000000] [c0] Clock enables : TOP, MIF
  77. [ 0.000000] [c0] mmc0: dout_mmc0 666000000
  78. [ 0.000000] [c0] mmc1: dout_mmc1 800000000
  79. [ 0.000000] [c0] mmc2: dout_mmc2 666000000
  80. [ 0.000000] [c0] scaler: dout_aclk_400_mscl 333000000 aclk_400_mscl 333000000
  81. [ 0.000000] [c0] [g2d_init_clock:319] aclk_333_g2d:333000000
  82. [ 0.000000] [c0] gscaler: dout_aclk_300_gscl 300000000 aclk_300_gscl 300000000
  83. [ 0.000000] [c0] [jpeg_clock_init:374]jpeg: dout_aclk_300_jpeg 300000000 aclk_300_jpeg 300000000
  84. [ 0.000000] [c0] mfc: aclk_333 400000000
  85. [ 0.000000] [c0] Exynos5422: clock setup completed
  86. [ 0.000000] [c0] Exynos: pwm: clock setup completed
  87. [ 0.000000] [c0] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  88. [ 0.000000] [c0] Switching to timer-based delay loop
  89. [ 0.000000] [c0] EXYNOS5422 PMU Initialize
  90. [ 0.000000] [c0] Console: colour dummy device 80x30
  91. [ 0.000000] [c0] console [tty1] enabled
  92. [ 0.000000] [c0] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
  93. [ 0.000000] [c0] ... MAX_LOCKDEP_SUBCLASSES: 8
  94. [ 0.000000] [c0] ... MAX_LOCK_DEPTH: 48
  95. [ 0.000000] [c0] ... MAX_LOCKDEP_KEYS: 8191
  96. [ 0.000000] [c0] ... CLASSHASH_SIZE: 4096
  97. [ 0.000000] [c0] ... MAX_LOCKDEP_ENTRIES: 16384
  98. [ 0.000000] [c0] ... MAX_LOCKDEP_CHAINS: 32768
  99. [ 0.000000] [c0] ... CHAINHASH_SIZE: 16384
  100. [ 0.000000] [c0] memory used by lock dependency info: 3679 kB
  101. [ 0.000000] [c0] per task-struct memory footprint: 1152 bytes
  102. [ 0.007156] [c0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000)
  103. [ 0.007249] [c0] pid_max: default: 32768 minimum: 301
  104. [ 0.007749] [c0] Mount-cache hash table entries: 512
  105. [ 0.043716] [c0] Initializing cgroup subsys debug
  106. [ 0.043790] [c0] Initializing cgroup subsys memory
  107. [ 0.043905] [c0] Initializing cgroup subsys devices
  108. [ 0.043969] [c0] Initializing cgroup subsys freezer
  109. [ 0.044030] [c0] Initializing cgroup subsys blkio
  110. [ 0.044079] [c0] Initializing cgroup subsys perf_event
  111. [ 0.044338] [c0] CPU: Testing write buffer coherency: ok
  112. [ 0.044437] [c0] ftrace: allocating 22999 entries in 68 pages
  113. [ 0.093226] [c0] /cpus/cpu@0 missing clock-frequency property
  114. [ 0.093295] [c0] /cpus/cpu@1 missing clock-frequency property
  115. [ 0.093342] [c0] /cpus/cpu@2 missing clock-frequency property
  116. [ 0.093388] [c0] /cpus/cpu@3 missing clock-frequency property
  117. [ 0.093433] [c0] /cpus/cpu@4 missing clock-frequency property
  118. [ 0.093477] [c0] /cpus/cpu@5 missing clock-frequency property
  119. [ 0.093521] [c0] /cpus/cpu@6 missing clock-frequency property
  120. [ 0.093565] [c0] /cpus/cpu@7 missing clock-frequency property
  121. [ 0.093664] [c0] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
  122. [ 0.093872] [c0] Running under secure firmware.
  123. [ 0.093944] [c0] Setting up static identity map for 0xc0625620 - 0xc0625678
  124. [ 0.094008] [c0] Exynos-SnapShot: exynos_ss_init failed
  125. [ 0.114360] [c0] ftrace: Allocated trace_printk buffers
  126. [ 0.136026] [c0] cpu1: SWRESET
  127. [ 0.136281] [c1] CPU1: Booted secondary processor
  128. [ 0.136310] [c1] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
  129. [ 0.145966] [c0] cpu2: SWRESET
  130. [ 0.146282] [c2] CPU2: Booted secondary processor
  131. [ 0.146310] [c2] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
  132. [ 0.155945] [c0] cpu3: SWRESET
  133. [ 0.156256] [c3] CPU3: Booted secondary processor
  134. [ 0.156283] [c3] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
  135. [ 0.165206] [c4] CPU4: Booted secondary processor
  136. [ 0.165984] [c4] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
  137. [ 0.175224] [c5] CPU5: Booted secondary processor
  138. [ 0.175981] [c5] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
  139. [ 0.185213] [c6] CPU6: Booted secondary processor
  140. [ 0.185993] [c6] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
  141. [ 0.195231] [c7] CPU7: Booted secondary processor
  142. [ 0.195987] [c7] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
  143. [ 0.196253] [c0] Brought up 8 CPUs
  144. [ 0.196575] [c0] SMP: Total of 8 processors activated (384.00 BogoMIPS).
  145. [ 0.196617] [c0] CPU: All CPU(s) started in HYP mode.
  146. [ 0.196652] [c0] CPU: Virtualization extensions available.
  147. [ 0.199153] [c0] devtmpfs: initialized
  148. [ 0.237892] [c6] sched: registering cpufreq notifiers for scale-invariant loads
  149. [ 0.240364] [c6] pinctrl core: initialized pinctrl subsystem
  150. [ 0.241453] [c6] regulator-dummy: no parameters
  151. [ 0.251318] [c5] NET: Registered protocol family 16
  152. [ 0.251935] [c5] DMA: preallocated 256 KiB pool for atomic coherent allocations
  153. [ 0.258833] [c5] gpiochip_add: registered GPIOs 0 to 7 on device: gpy7
  154. [ 0.259012] [c5] gpiochip_add: registered GPIOs 8 to 15 on device: gpx0
  155. [ 0.259179] [c5] gpiochip_add: registered GPIOs 16 to 23 on device: gpx1
  156. [ 0.259353] [c5] gpiochip_add: registered GPIOs 24 to 31 on device: gpx2
  157. [ 0.259526] [c5] gpiochip_add: registered GPIOs 32 to 39 on device: gpx3
  158. [ 0.261455] [c5] gpiochip_add: registered GPIOs 40 to 47 on device: gpc0
  159. [ 0.261630] [c5] gpiochip_add: registered GPIOs 48 to 55 on device: gpc1
  160. [ 0.261800] [c5] gpiochip_add: registered GPIOs 56 to 62 on device: gpc2
  161. [ 0.261967] [c5] gpiochip_add: registered GPIOs 63 to 66 on device: gpc3
  162. [ 0.262137] [c5] gpiochip_add: registered GPIOs 67 to 68 on device: gpc4
  163. [ 0.262303] [c5] gpiochip_add: registered GPIOs 69 to 76 on device: gpd1
  164. [ 0.262468] [c5] gpiochip_add: registered GPIOs 77 to 82 on device: gpy0
  165. [ 0.262639] [c5] gpiochip_add: registered GPIOs 83 to 86 on device: gpy1
  166. [ 0.262804] [c5] gpiochip_add: registered GPIOs 87 to 92 on device: gpy2
  167. [ 0.262983] [c5] gpiochip_add: registered GPIOs 93 to 100 on device: gpy3
  168. [ 0.263149] [c5] gpiochip_add: registered GPIOs 101 to 108 on device: gpy4
  169. [ 0.263314] [c5] gpiochip_add: registered GPIOs 109 to 116 on device: gpy5
  170. [ 0.263485] [c5] gpiochip_add: registered GPIOs 117 to 124 on device: gpy6
  171. [ 0.265129] [c5] gpiochip_add: registered GPIOs 125 to 132 on device: gpe0
  172. [ 0.265303] [c5] gpiochip_add: registered GPIOs 133 to 134 on device: gpe1
  173. [ 0.265470] [c5] gpiochip_add: registered GPIOs 135 to 140 on device: gpf0
  174. [ 0.265637] [c5] gpiochip_add: registered GPIOs 141 to 148 on device: gpf1
  175. [ 0.265811] [c5] gpiochip_add: registered GPIOs 149 to 156 on device: gpg0
  176. [ 0.265979] [c5] gpiochip_add: registered GPIOs 157 to 164 on device: gpg1
  177. [ 0.266180] [c5] gpiochip_add: registered GPIOs 165 to 166 on device: gpg2
  178. [ 0.266354] [c5] gpiochip_add: registered GPIOs 167 to 170 on device: gpj4
  179. [ 0.267775] [c5] gpiochip_add: registered GPIOs 171 to 178 on device: gpa0
  180. [ 0.267962] [c5] gpiochip_add: registered GPIOs 179 to 184 on device: gpa1
  181. [ 0.268130] [c5] gpiochip_add: registered GPIOs 185 to 192 on device: gpa2
  182. [ 0.268304] [c5] gpiochip_add: registered GPIOs 193 to 197 on device: gpb0
  183. [ 0.268511] [c5] gpiochip_add: registered GPIOs 198 to 202 on device: gpb1
  184. [ 0.268700] [c5] gpiochip_add: registered GPIOs 203 to 206 on device: gpb2
  185. [ 0.268880] [c5] gpiochip_add: registered GPIOs 207 to 214 on device: gpb3
  186. [ 0.269056] [c5] gpiochip_add: registered GPIOs 215 to 216 on device: gpb4
  187. [ 0.269229] [c5] gpiochip_add: registered GPIOs 217 to 224 on device: gph0
  188. [ 0.271239] [c5] gpiochip_add: registered GPIOs 225 to 231 on device: gpz
  189. [ 0.291083] [c5] syscon 10040000.system-controller: regmap [mem 0x10040000-0x10044fff] registered
  190. [ 0.291577] [c5] syscon 10050000.syscon: regmap [mem 0x10050000-0x10054fff] registered
  191. [ 0.299340] [c5] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  192. [ 0.299390] [c5] hw-breakpoint: maximum watchpoint size is 8 bytes.
  193. [ 0.301363] [c5] S3C Power Management, Copyright 2004 Simtec Electronics
  194. [ 0.305525] [c5] PM DOMAIN: pd-cam has a new child pd-isp.
  195. [ 0.306446] [c5] PM DOMAIN: pd-gscl has a new child pd-cam.
  196. [ 0.306497] [c5] EXYNOS5: PM Domain Initialize
  197. [ 0.306806] [c5] pd-gscl - on
  198. [ 0.306995] [c5] pd-isp - on
  199. [ 0.307182] [c5] pd-mfc - on
  200. [ 0.307215] [c5] pd-g3d - on, always
  201. [ 0.307249] [c5] pd-disp1 - on, always
  202. [ 0.307445] [c5] pd-maudio - on
  203. [ 0.307477] [c5] pd-g2d - on, always
  204. [ 0.307670] [c5] pd-mscl - on
  205. [ 0.307704] [c5] pd-fsys - on, always
  206. [ 0.307739] [c5] pd-psgen - on, always
  207. [ 0.307773] [c5] pd-peric - on, always
  208. [ 0.307805] [c5] pd-wcore - on, always
  209. [ 0.308000] [c5] pd-cam - on
  210. [ 0.308041] [c5] EXYNOS: Initializing architecture
  211. [ 0.309651] [c5] exynos-sysmmu 10a60000.sysmmu: --> 10850000.fimg2d
  212. [ 0.309696] [c5] exynos-sysmmu 10a60000.sysmmu: [OK]
  213. [ 0.310038] [c5] exynos-sysmmu 10a70000.sysmmu: --> 10850000.fimg2d
  214. [ 0.310081] [c5] exynos-sysmmu 10a70000.sysmmu: [OK]
  215. [ 0.310433] [c5] exynos-sysmmu 14650000.sysmmu: --> 14450000.mixer
  216. [ 0.310476] [c5] exynos-sysmmu 14650000.sysmmu: [OK]
  217. [ 0.310807] [c5] exynos-sysmmu 13e80000.sysmmu: --> 13e00000.gsc
  218. [ 0.310849] [c5] exynos-sysmmu 13e80000.sysmmu: [OK]
  219. [ 0.311213] [c5] exynos-sysmmu 13e90000.sysmmu: --> 13e10000.gsc
  220. [ 0.311256] [c5] exynos-sysmmu 13e90000.sysmmu: [OK]
  221. [ 0.311593] [c5] exynos-sysmmu 12880000.sysmmu: --> 12800000.scaler
  222. [ 0.311634] [c5] exynos-sysmmu 12880000.sysmmu: [OK]
  223. [ 0.311975] [c5] exynos-sysmmu 12890000.sysmmu: --> 12810000.scaler
  224. [ 0.312017] [c5] exynos-sysmmu 12890000.sysmmu: [OK]
  225. [ 0.312355] [c5] exynos-sysmmu 128a0000.sysmmu: --> 12820000.scaler
  226. [ 0.312398] [c5] exynos-sysmmu 128a0000.sysmmu: [OK]
  227. [ 0.312738] [c5] exynos-sysmmu 128c0000.sysmmu: --> 12800000.scaler
  228. [ 0.312782] [c5] exynos-sysmmu 128c0000.sysmmu: [OK]
  229. [ 0.313113] [c5] exynos-sysmmu 128d0000.sysmmu: --> 12810000.scaler
  230. [ 0.313155] [c5] exynos-sysmmu 128d0000.sysmmu: [OK]
  231. [ 0.313490] [c5] exynos-sysmmu 128e0000.sysmmu: --> 12820000.scaler
  232. [ 0.313532] [c5] exynos-sysmmu 128e0000.sysmmu: [OK]
  233. [ 0.313863] [c5] exynos-sysmmu 11f10000.sysmmu: --> 11f50000.jpeg
  234. [ 0.313905] [c5] exynos-sysmmu 11f10000.sysmmu: [OK]
  235. [ 0.314234] [c5] exynos-sysmmu 11f20000.sysmmu: --> 11f60000.jpeg
  236. [ 0.314276] [c5] exynos-sysmmu 11f20000.sysmmu: [OK]
  237. [ 0.314592] [c5] exynos-sysmmu 11200000.sysmmu: --> 11000000.mfc
  238. [ 0.314634] [c5] exynos-sysmmu 11200000.sysmmu: [OK]
  239. [ 0.314961] [c5] exynos-sysmmu 11210000.sysmmu: --> 11000000.mfc
  240. [ 0.315002] [c5] exynos-sysmmu 11210000.sysmmu: [OK]
  241. [ 0.315367] [c5] exynos-sysmmu 14640000.sysmmu: --> 14400000.fimd
  242. [ 0.315410] [c5] exynos-sysmmu 14640000.sysmmu: [OK]
  243. [ 0.315766] [c5] exynos-sysmmu 14680000.sysmmu: --> 14400000.fimd
  244. [ 0.315808] [c5] exynos-sysmmu 14680000.sysmmu: [OK]
  245. [ 0.316312] [c5] CPU Info : Samsung Exynos5422 Soc is BIN1
  246. [ 0.316348] [c5] Exynos5422 ASV : Use Fusing Speed Group 5
  247. [ 0.316380] [c5] Exynos5422 ASV : invalid IDS value
  248. [ 0.316412] [c5] EXYNOS5422 ASV : IDS : 0 HPM : 0
  249. [ 0.316472] [c5] VDD_ARM ASV group is 5
  250. [ 0.316504] [c5] VDD_KFC ASV group is 5
  251. [ 0.316536] [c5] VDD_INT ASV group is 5
  252. [ 0.316567] [c5] VDD_MIF ASV group is 5
  253. [ 0.316597] [c5] VDD_G3D ASV group is 5
  254. [ 0.316627] [c5] VDD_ISP ASV group is 5
  255. [ 0.330409] [c6] bio: create slab <bio-0> at 0
  256. [ 0.332220] [c6] of_get_named_gpio_flags exited with status 119
  257. [ 0.332473] [c6] VUSB_BOOST_5V: 5000 mV
  258. [ 0.332777] [c6] of_get_named_gpio_flags: can't parse gpios property
  259. [ 0.332996] [c6] MAIN_DC: no parameters
  260. [ 0.333261] [c6] of_get_named_gpio_flags: can't parse gpios property
  261. [ 0.333470] [c6] hdmi-en: no parameters
  262. [ 0.334623] [c6] SCSI subsystem initialized
  263. [ 0.335047] [c6] usbcore: registered new interface driver usbfs
  264. [ 0.335177] [c6] usbcore: registered new interface driver hub
  265. [ 0.335417] [c6] usbcore: registered new device driver usb
  266. [ 0.341597] [c7] vdd_mif: 700 <--> 1300 mV at 1100 mV
  267. [ 0.342961] [c7] vdd_eagle: 800 <--> 1500 mV at 1000 mV
  268. [ 0.344232] [c7] vdd_int: 800 <--> 1400 mV at 1000 mV
  269. [ 0.345508] [c7] vdd_g3d: 700 <--> 1400 mV at 1000 mV
  270. [ 0.346783] [c7] vdd_kfc: 800 <--> 1500 mV at 1025 mV
  271. [ 0.348617] [c7] vddf_2v85: 3300 mV
  272. [ 0.350035] [c7] vdd_adc: 1800 mV
  273. [ 0.351458] [c7] vdd_pll: 1800 mV
  274. [ 0.352940] [c7] vdd_ldo6: 1000 mV
  275. [ 0.354361] [c7] vdd_ldo7: 1800 mV
  276. [ 0.355772] [c7] vdd_ldo8: 1800 mV
  277. [ 0.357231] [c7] vdd_ldo9: 3300 mV
  278. [ 0.358651] [c7] vdd_ldo10: 1800 mV
  279. [ 0.360076] [c7] vdd_ldo11: 1000 mV
  280. [ 0.361185] [c7] vdd_ldo13: 1800 <--> 3300 mV at 3300 mV
  281. [ 0.362617] [c7] vdd_ldo15: 3300 mV
  282. [ 0.364092] [c7] vdd_eth: 3300 mV
  283. [ 0.365635] [c7] vdd_ldo18: 1850 mV
  284. [ 0.366781] [c7] vdd_ldo19: 2800 <--> 3300 mV at 3300 mV
  285. [ 0.367913] [c7] vdd_mifs: 800 <--> 1100 mV at 1100 mV
  286. [ 0.369335] [c7] vdd_ldo26: 3000 mV
  287. [ 0.370446] [c7] vdd_g3ds: 800 <--> 1100 mV at 1000 mV
  288. [ 0.371930] [c7] vdd_ldo28: 3300 mV
  289. [ 0.373472] [c7] vdd_ldo30: 3300 mV
  290. [ 0.376434] [c7] of_get_named_gpio_flags exited with status 177
  291. [ 0.376465] [c7] of_get_named_gpio_flags exited with status 178
  292. [ 0.377377] [c4] i2c-gpio i2c_gpio.8: using pins 177 (SDA) and 178 (SCL)
  293. [ 0.377543] [c4] media: Linux media interface: v0.10
  294. [ 0.377658] [c4] Linux video capture interface: v2.00
  295. [ 0.379705] [c5] IOVMMU: Created debugfs entry at debugfs/iovmm
  296. [ 0.380326] [c5] Advanced Linux Sound Architecture Driver Initialized.
  297. [ 0.380978] [c5] PM DOMAIN: pd-maudio, Device : 3810000.lpass Registered
  298. [ 0.381040] [c5] Samsung Low Power Audio Subsystem driver, (c)2013 Samsung Electronics
  299. [ 0.383039] [c5] Loading modules backported from Linux version next-20150222-0-g53e418f1
  300. [ 0.383087] [c5] Backport integrated by backports.git backports-20150222-0-g2745ccd
  301. [ 0.384897] [c5] Switching to clocksource mct-frc
  302. [ 0.462606] [c5] NET: Registered protocol family 2
  303. [ 0.464400] [c5] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  304. [ 0.464901] [c5] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
  305. [ 0.466932] [c5] TCP: Hash tables configured (established 8192 bind 8192)
  306. [ 0.467072] [c5] TCP: reno registered
  307. [ 0.467119] [c5] UDP hash table entries: 512 (order: 3, 40960 bytes)
  308. [ 0.467418] [c5] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
  309. [ 0.468492] [c5] NET: Registered protocol family 1
  310. [ 0.469021] [c5] Unpacking initramfs...
  311. [ 0.767555] [c7] Freeing initrd memory: 3928K (c2001000 - c23d7000)
  312. [ 0.781069] [c7] bounce pool size: 64 pages
  313. [ 0.789680] [c7] VFS: Disk quotas dquot_6.5.2
  314. [ 0.790311] [c7] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  315. [ 0.793149] [c7] ROMFS MTD (C) 2007 Red Hat, Inc.
  316. [ 0.793682] [c7] msgmni has been set to 1448
  317. [ 0.797861] [c7] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  318. [ 0.798290] [c7] io scheduler noop registered
  319. [ 0.798326] [c7] io scheduler deadline registered
  320. [ 0.798584] [c7] io scheduler cfq registered (default)
  321. [ 0.814173] [c7] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330
  322. [ 0.814224] [c7] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
  323. [ 0.820248] [c7] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330
  324. [ 0.820298] [c7] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  325. [ 0.826117] [c7] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330
  326. [ 0.826166] [c7] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  327. [ 0.829240] [c7] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330
  328. [ 0.829288] [c7] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6
  329. [ 0.973637] [c7] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  330. [ 0.976509] [c7] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 83) is a S3C6400/10
  331. [ 0.977329] [c7] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 84) is a S3C6400/10
  332. [ 0.978094] [c7] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 85) is a S3C6400/10
  333. [ 0.978837] [c7] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 86) is a S3C6400/10
  334. [ 0.982202] [c7] [drm] Initialized drm 1.1.0 20060810
  335. [ 0.985563] [c7] of_get_named_gpio_flags exited with status 39
  336. [ 0.989630] [c7] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  337. [ 0.989675] [c7] [drm] No driver support for vblank timestamp query.
  338. [ 0.989722] [c7] exynos-mixer 14450000.mixer: probe start
  339. [ 0.990018] [c7] exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops)
  340. [ 0.990418] [c7] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_component_ops)
  341. [ 0.990495] [c7] [drm] Initialized exynos 1.0.0 20110530 on minor 0
  342. [ 0.991125] [c7] mali 11800000.mali: Continuing without Mali clock control
  343. [ 0.994740] [c7] hrtimer: interrupt took 121042 ns
  344. [ 0.995127] [c7] mali 11800000.mali: GPU identified as 0x0620 r0p1 status 0
  345. [ 1.001094] mali 11800000.mali: Probed as mali0
  346. [ 1.009438] [c5] loop: module loaded
  347. [ 1.014553] [c5] of_get_named_gpio_flags exited with status 48
  348. [ 1.014580] [c5] of_get_named_gpio_flags exited with status 37
  349. [ 1.217308] [c5] of_get_named_gpio_flags exited with status 17
  350. [ 1.217334] [c5] of_get_named_gpio_flags exited with status 36
  351. [ 1.418858] [c5] dwc3 12400000.dwc3: dwc3_otg address space is not supported
  352. [ 1.419918] [c5] dwc3 12400000.dwc3: Binding gadget dwc3-gadget
  353. [ 1.420814] [c6] dwc3 12400000.dwc3: Turn on host
  354. [ 1.621956] [c6] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  355. [ 1.621998] [c6] ehci-s5p: EHCI s5p driver
  356. [ 1.622359] [c6] of_get_named_gpio_flags exited with status 121
  357. [ 1.622629] [c6] s5p-ehci 12110000.usb: EHCI Host Controller
  358. [ 1.622778] [c6] s5p-ehci 12110000.usb: new USB bus registered, assigned bus number 1
  359. [ 1.623032] [c6] s5p-ehci 12110000.usb: irq 103, io mem 0x12110000
  360. [ 1.630156] [c6] s5p-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
  361. [ 1.631614] [c6] hub 1-0:1.0: USB hub found
  362. [ 1.631675] [c6] hub 1-0:1.0: 3 ports detected
  363. [ 1.633032] [c6] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  364. [ 1.633466] [c6] exynos-ohci 12120000.usb: EXYNOS OHCI Host Controller
  365. [ 1.633541] [c6] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2
  366. [ 1.633642] [c6] exynos-ohci 12120000.usb: irq 103, io mem 0x12120000
  367. [ 1.690464] [c6] hub 2-0:1.0: USB hub found
  368. [ 1.690525] [c6] hub 2-0:1.0: 3 ports detected
  369. [ 1.692128] [c6] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
  370. [ 1.692200] [c6] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3
  371. [ 1.692501] [c6] xhci-hcd xhci-hcd.2.auto: irq 104, io mem 0x12000000
  372. [ 1.693418] [c6] xHCI xhci_add_endpoint called for root hub
  373. [ 1.693436] [c6] xHCI xhci_check_bandwidth called for root hub
  374. [ 1.693712] [c6] hub 3-0:1.0: USB hub found
  375. [ 1.693806] [c6] hub 3-0:1.0: 1 port detected
  376. [ 1.694402] [c6] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
  377. [ 1.694467] [c6] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4
  378. [ 1.695546] [c6] xHCI xhci_add_endpoint called for root hub
  379. [ 1.695562] [c6] xHCI xhci_check_bandwidth called for root hub
  380. [ 1.695847] [c6] hub 4-0:1.0: USB hub found
  381. [ 1.695908] [c6] hub 4-0:1.0: 1 port detected
  382. [ 1.696605] [c6] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
  383. [ 1.696677] [c6] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 5
  384. [ 1.696986] [c6] xhci-hcd xhci-hcd.5.auto: irq 105, io mem 0x12400000
  385. [ 1.697919] [c6] xHCI xhci_add_endpoint called for root hub
  386. [ 1.697936] [c6] xHCI xhci_check_bandwidth called for root hub
  387. [ 1.698207] [c6] hub 5-0:1.0: USB hub found
  388. [ 1.698266] [c6] hub 5-0:1.0: 1 port detected
  389. [ 1.698854] [c6] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
  390. [ 1.698918] [c6] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 6
  391. [ 1.699881] [c6] xHCI xhci_add_endpoint called for root hub
  392. [ 1.699897] [c6] xHCI xhci_check_bandwidth called for root hub
  393. [ 1.700251] [c6] hub 6-0:1.0: USB hub found
  394. [ 1.700310] [c6] hub 6-0:1.0: 1 port detected
  395. [ 1.701182] [c6] usbcore: registered new interface driver usb-storage
  396. [ 1.701418] [c6] usbcore: registered new interface driver usbserial
  397. [ 1.701542] [c6] usbcore: registered new interface driver usbserial_generic
  398. [ 1.701663] [c6] usbserial: USB Serial support registered for generic
  399. [ 1.702463] [c6] of_get_named_gpio_flags: can't parse gpios property
  400. [ 1.702484] [c6] exynos-usb-switch usb-switch.10: host detect gpio is not available
  401. [ 1.702528] [c6] of_get_named_gpio_flags: can't parse gpios property
  402. [ 1.702546] [c6] exynos-usb-switch usb-switch.10: device detect gpio is not available
  403. [ 1.702590] [c6] of_get_named_gpio_flags: can't parse gpios property
  404. [ 1.702607] [c6] exynos-usb-switch usb-switch.10: vbus control gpio is not available
  405. [ 1.702675] [c6] exynos-usb-switch usb-switch.10: failed to configure pins
  406. [ 1.702911] [c6] exynos-usb-switch usb-switch.10: udc device is not available
  407. [ 1.702952] [c6] exynos-usb-switch usb-switch.10: Disable device detect IRQ
  408. [ 1.702998] [c6] usb cable = 1
  409. [ 1.703992] [c6] mousedev: PS/2 mouse device common for all mice
  410. [ 1.707626] [c6] s2m-rtc s2m-rtc: s2m_rtc_enable_wtsr: enable WTSR
  411. [ 1.707965] [c6] s2m-rtc s2m-rtc: s2m_rtc_enable_smpl: enable SMPL
  412. [ 1.708458] [c6] s2m_rtc_enable_smpl: WTSR_SMPL(0xc7)
  413. [ 1.712867] [c6] s2m-rtc s2m-rtc: rtc core: registered s2m-rtc as rtc0
  414. [ 1.713765] [c6] i2c /dev entries driver
  415. [ 1.715143] [c6] IR NEC protocol handler initialized
  416. [ 1.715182] [c6] IR RC5(x) protocol handler initialized
  417. [ 1.715217] [c6] IR RC6 protocol handler initialized
  418. [ 1.715250] [c6] IR JVC protocol handler initialized
  419. [ 1.715283] [c6] IR Sony protocol handler initialized
  420. [ 1.715317] [c6] IR RC5 (streamzap) protocol handler initialized
  421. [ 1.715352] [c6] IR SANYO protocol handler initialized
  422. [ 1.715386] [c6] IR MCE Keyboard/mouse protocol handler initialized
  423. [ 1.715948] [c6] PM DOMAIN: pd-mfc, Device : 11000000.mfc Registered
  424. [ 1.716009] [c6] s5p-mfc 11000000.mfc: exynos-iommu gpd_dev_ops inserted!
  425. [ 1.716072] [c6] s5p-mfc 11000000.mfc: s5p_mfc_probe()
  426. [ 1.716100] [c6] s5p-mfc 11000000.mfc: of alias get id : mfc-0
  427. [ 1.716855] [c6] s5p-mfc 11000000.mfc: decoder registered as /dev/video6
  428. [ 1.717219] [c6] s5p-mfc 11000000.mfc: encoder registered as /dev/video7
  429. [ 1.717620] [c6] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
  430. [ 1.717689] [c6] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x50000000.
  431. [ 1.717748] [c6] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0x70000000.
  432. [ 1.717812] [c6] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x80000000.
  433. [ 1.717875] [c6] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0xb0000000.
  434. [ 1.717932] [c6] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
  435. [ 1.718955] [c6] ion_cma ion_mfc_nfw: Alread isolated!
  436. [ 1.718992] [c6] s5p_mfc_probe--
  437. [ 1.719320] [c6] S5P CEC for Exynos4 Driver, (c) 2009 Samsung Electronics
  438. [ 1.720232] [c6] of_get_named_gpio_flags exited with status 38
  439. [ 1.720351] [c6] s5p-tvout-cec 101b0000.cec: success request GPIO for hdmi-cec
  440. [ 1.720449] s5p-tvout-cec 101b0000.cec: probe successful
  441. [ 1.721992] [c6] TRIMINFO[0] = 0x80682f
  442. [ 1.722026] [c6] TMU_CONTROL[0] = 0x10609803
  443. [ 1.722057] [c6] CURRENT_TEMP[0] = 0x0
  444. [ 1.722086] [c6] THRESHOLD_TEMP_RISE[0] = 0x847f7a75
  445. [ 1.722118] [c6] THRESHOLD_TEMP_FALL[0] = 0x827d7873
  446. [ 1.722150] [c6] INTEN[0] = 0x11111111
  447. [ 1.722178] [c6] INTCLEAR[0] = 0x0
  448. [ 1.722237] [c6] TRIMINFO[1] = 0x805e23
  449. [ 1.722266] [c6] TMU_CONTROL[1] = 0x10609803
  450. [ 1.722296] [c6] CURRENT_TEMP[1] = 0x0
  451. [ 1.722324] [c6] THRESHOLD_TEMP_RISE[1] = 0x78736e69
  452. [ 1.722356] [c6] THRESHOLD_TEMP_FALL[1] = 0x76716c67
  453. [ 1.722387] [c6] INTEN[1] = 0x11111111
  454. [ 1.722414] [c6] INTCLEAR[1] = 0x0
  455. [ 1.722473] [c6] TRIMINFO[2] = 0x806a32
  456. [ 1.722502] [c6] TMU_CONTROL[2] = 0x10609803
  457. [ 1.722531] [c6] CURRENT_TEMP[2] = 0x0
  458. [ 1.722559] [c6] THRESHOLD_TEMP_RISE[2] = 0x87827d78
  459. [ 1.722590] [c6] THRESHOLD_TEMP_FALL[2] = 0x85807b76
  460. [ 1.722622] [c6] INTEN[2] = 0x11111111
  461. [ 1.722649] [c6] INTCLEAR[2] = 0x0
  462. [ 1.722708] [c6] TRIMINFO[3] = 0x806b32
  463. [ 1.722736] [c6] TMU_CONTROL[3] = 0x10609803
  464. [ 1.722766] [c6] CURRENT_TEMP[3] = 0x0
  465. [ 1.722794] [c6] THRESHOLD_TEMP_RISE[3] = 0x85807b76
  466. [ 1.722825] [c6] THRESHOLD_TEMP_FALL[3] = 0x837e7974
  467. [ 1.722856] [c6] INTEN[3] = 0x11111111
  468. [ 1.722883] [c6] INTCLEAR[3] = 0x0
  469. [ 1.722942] [c6] TRIMINFO[4] = 0x806930
  470. [ 1.722970] [c6] TMU_CONTROL[4] = 0x10609803
  471. [ 1.722999] [c6] CURRENT_TEMP[4] = 0x0
  472. [ 1.723027] [c6] THRESHOLD_TEMP_RISE[4] = 0x87827d78
  473. [ 1.723058] [c6] THRESHOLD_TEMP_FALL[4] = 0x85807b76
  474. [ 1.723089] [c6] INTEN[4] = 0x11111111
  475. [ 1.723116] [c6] INTCLEAR[4] = 0x0
  476. [ 1.724559] [c6] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled
  477. [ 1.725527] [c6] device-mapper: uevent: version 1.0.3
  478. [ 1.726161] [c6] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
  479. [ 1.727104] [c6] cpuidle: using governor ladder
  480. [ 1.728793] [c6] cpuidle: using governor menu
  481. [ 1.728882] [c6] Synopsys Designware Multimedia Card Interface Driver
  482. [ 1.729997] [c6] dwmmc_exynos 12200000.dwmmc0: Clock pin control Pin:gpc0-0 Addr:13410000.pinctrl Val:3 Num:4
  483. [ 1.730386] of_get_named_gpio_flags exited with status 69
  484. [ 1.730434] [c6] dwmmc_exynos 12200000.dwmmc0: dw_mci_parse_dt : emmc h/w reset gpio[69] notifier registered.
  485. [ 1.730606] [c6] dwmmc_exynos 12200000.dwmmc0: Using internal DMA controller.
  486. [ 1.730660] [c6] dwmmc_exynos 12200000.dwmmc0: FIFOTH: 0x 300f0030
  487. [ 1.730706] dwmmc_exynos 12200000.dwmmc0: Version ID is 250a
  488. [ 1.731236] [c7] dwmmc_exynos 12200000.dwmmc0: DW MMC controller at irq 107, 64 bit host data width, 64 deep fifo
  489. [ 1.750205] [c7] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 400000Hz, actual 385416HZ div = 27)
  490. [ 1.765366] [c7] dwmmc_exynos 12200000.dwmmc0: 1 slots initialized
  491. [ 1.765988] [c7] dwmmc_exynos 12220000.dwmmc2: Clock pin control Pin:gpc2-0 Addr:13410000.pinctrl Val:3 Num:3
  492. [ 1.766104] of_get_named_gpio_flags: can't parse gpios property
  493. [ 1.766210] [c7] dwmmc_exynos 12220000.dwmmc2: Using internal DMA controller.
  494. [ 1.766257] [c7] dwmmc_exynos 12220000.dwmmc2: FIFOTH: 0x 300f0030
  495. [ 1.766294] dwmmc_exynos 12220000.dwmmc2: Version ID is 250a
  496. [ 1.766738] [c7] dwmmc_exynos 12220000.dwmmc2: DW MMC controller at irq 109, 64 bit host data width, 64 deep fifo
  497. [ 1.767145] [c7] mmc1: vmmc regulator found
  498. [ 1.767318] [c7] mmc1: vqmmc regulator found
  499. [ 1.785190] [c7] mmc_host mmc1: Bus speed (slot 0) = 20812500Hz (slot req 400000Hz, actual 385416HZ div = 27)
  500. [ 1.800359] [c7] dwmmc_exynos 12220000.dwmmc2: 1 slots initialized
  501. [ 1.801560] [c7] leds-gpio leds.15: pins are not configured from the driver
  502. [ 1.801625] [c7] of_get_named_gpio_flags exited with status 205
  503. [ 1.801651] [c7] of_get_named_gpio_flags exited with status 204
  504. [ 1.801675] [c7] of_get_named_gpio_flags exited with status 27
  505. [ 1.801704] [c7] of_get_named_gpio_flags exited with status 205
  506. [ 1.802028] [c7] of_get_named_gpio_flags exited with status 204
  507. [ 1.802271] [c7] of_get_named_gpio_flags exited with status 27
  508. [ 1.802906] [c7] ledtrig-cpu: registered to indicate activity on CPUs
  509. [ 1.802996] [c7] S5P ACE Driver(SLIMSSS), (c) 2013 Samsung Electronics
  510. [ 1.803793] [c7] ACE: ecb-aes-s5p-ace
  511. [ 1.804116] [c7] ACE: cbc-aes-s5p-ace
  512. [ 1.804432] [c7] ACE: ctr-aes-s5p-ace
  513. [ 1.804731] [c7] ACE: xts-aes-s5p-ace
  514. [ 1.805049] [c7] ACE: sha1-s5p-ace
  515. [ 1.805446] [c4] ACE: sha256-s5p-ace
  516. [ 1.805480] [c4] ACE driver is initialized
  517. [ 1.805826] [c4] hidraw: raw HID events driver (C) Jiri Kosina
  518. [ 1.806258] [c4] usbcore: registered new interface driver usbhid
  519. [ 1.806295] [c4] usbhid: USB HID core driver
  520. [ 1.807283] [c4] exynos-adc 12d10000.adc: operating without regulator vdd[-19]
  521. [ 1.807871] [c4] exynos-adc 12d10000.adc: Probed successfully driver.
  522. [ 1.808794] [c4] odroid-fan odroid_fan.14: unable to request PWM, trying legacy API
  523. [ 1.808976] [c4] pwm-samsung: tin parent at 66600000
  524. [ 1.811135] [c4] of_get_named_gpio_flags exited with status 34
  525. [ 1.813021] [c4] lpass_register_subip: i2s(de36dc10) registered
  526. [ 2.000201] [c5] usb 3-1: new high-speed USB device number 2 using xhci-hcd
  527. [ 2.005195] [c5] mmc0: BKOPS_EN bit is not set
  528. [ 2.023212] [c5] mmc_host mmc0: Bus speed (slot 0) = 166500000Hz (slot req 400000Hz, actual 398325HZ div = 209)
  529. [ 2.023310] [c5] mmc_host mmc0: Bus speed (slot 0) = 166500000Hz (slot req 166500000Hz, actual 166500000HZ div = 0)
  530. [ 2.023460] [c5] mmc_host mmc0: Bus speed (slot 0) = 333000000Hz (slot req 166500000Hz, actual 166500000HZ div = 1)
  531. [ 2.023545] [c5] mmc_host mmc0: Bus speed (slot 0) = 333000000Hz (slot req 200000000Hz, actual 166500000HZ div = 1)
  532. [ 2.024346] [c0] dwmmc_exynos 12200000.dwmmc0: End bit error
  533. [ 2.024521] [c5] mmc_host mmc0: Tuning error: cmd.error:0, data.error:-5
  534. [ 2.024677] [c0] dwmmc_exynos 12200000.dwmmc0: End bit error
  535. [ 2.024842] [c5] mmc_host mmc0: Tuning error: cmd.error:0, data.error:-5
  536. [ 2.025489] [c5] dwmmc_exynos 12200000.dwmmc0: sample_good: 0x cf best_sample: 0x 00
  537. [ 2.026385] [c5] mmc_host mmc0: Bus speed (slot 0) = 41625000Hz (slot req 200000000Hz, actual 41625000HZ div = 0)
  538. [ 2.026483] [c5] mmc_host mmc0: Bus speed (slot 0) = 41625000Hz (slot req 41625000Hz, actual 41625000HZ div = 0)
  539. [ 2.027847] [c5] mmc_host mmc0: Bus speed (slot 0) = 333000000Hz (slot req 41625000Hz, actual 41625000HZ div = 4)
  540. [ 2.027943] [c5] mmc_host mmc0: Bus speed (slot 0) = 333000000Hz (slot req 200000000Hz, actual 166500000HZ div = 1)
  541. [ 2.028919] [c5] mmc0: new HS200-DDR MMC card at address 0001
  542. [ 2.030151] [c5] mmcblk0: mmc0:0001 SDW32G 29.1 GiB
  543. [ 2.030727] [c5] mmcblk0boot0: mmc0:0001 SDW32G partition 1 4.00 MiB
  544. [ 2.031303] [c5] mmcblk0boot1: mmc0:0001 SDW32G partition 2 4.00 MiB
  545. [ 2.033493] [c5] mmcblk0: p1 p2
  546. [ 2.036846] [c5] mmcblk0boot1: unknown partition table
  547. [ 2.039098] [c5] mmcblk0boot0: unknown partition table
  548. [ 2.047389] [c6] hub 3-1:1.0: USB hub found
  549. [ 2.047888] [c6] hub 3-1:1.0: 2 ports detected
  550. [ 2.245465] [c6] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd
  551. [ 2.261674] [c6] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted.
  552. [ 2.271569] [c6] hub 4-1:1.0: USB hub found
  553. [ 2.272018] [c6] hub 4-1:1.0: 2 ports detected
  554. [ 2.380445] [c6] usb 6-1: new SuperSpeed USB device number 2 using xhci-hcd
  555. [ 2.395735] [c6] usb 6-1: Parent hub missing LPM exit latency info. Power management will be impacted.
  556. [ 2.541625] [c7] usb 4-1.1: new SuperSpeed USB device number 3 using xhci-hcd
  557. [ 2.556441] [c7] usb 4-1.1: Parent hub missing LPM exit latency info. Power management will be impacted.
  558. [ 2.560176] [c7] usb-storage 4-1.1:1.0: USB Mass Storage device detected
  559. [ 2.560843] [c7] scsi0 : usb-storage 4-1.1:1.0
  560. [ 2.631650] [c7] usb 4-1.2: new SuperSpeed USB device number 4 using xhci-hcd
  561. [ 2.646512] [c7] usb 4-1.2: Parent hub missing LPM exit latency info. Power management will be impacted.
  562. [ 2.650493] [c7] usb-storage 4-1.2:1.0: USB Mass Storage device detected
  563. [ 2.651095] [c7] scsi1 : usb-storage 4-1.2:1.0
  564. [ 2.810139] [c4] exynos5-hsi2c 12cb0000.hsi2c: Register dump(suspended : 0)
  565. : CTL 0x00000089
  566. : FIFO_CTL 0x00200203
  567. : TRAILING_CTL 0x0000000f
  568. : CLK_CTL 0x00000000
  569. : CLK_SLOT 0x00000000
  570. : INT_EN 0x00000000
  571. : INT_STAT 0x00000000
  572. : ERR_STAT 0x00000000
  573. : FIFO_STAT 0x01000002
  574. : TXDATA 0xdeadbeaf
  575. : RXDATA 0x00000000
  576. : CONF 0xb00300ff
  577. : AUTO_CONF 0x00020002
  578. : TIMEOUT 0x000000ff
  579. : MANUAL_CMD 0x00000000
  580. : TRANS_STAT 0x00000000
  581. : TIMING_HS1 0x4b4b4b00
  582. : TIMING_HS2 0x25004b4b
  583. : TIMING_HS3 0x00000096
  584. : TIMING_FS1 0x4b4b4b00
  585. : TIMING_FS2 0x25004b4b
  586. : TIMING_FS3 0x00000096
  587. : TIMING_SLA 0x00000025
  588. : ADDR 0x00004000
  589. [ 2.810500] [c4] exynos5-hsi2c 12cb0000.hsi2c: tx timeout
  590. [ 3.651321] [c7] scsi 1:0:0:0: Direct-Access INTEL SS DSC2BW120A4 1003 PQ: 0 ANSI: 6
  591. [ 3.653293] [c7] sd 1:0:0:0: Attached scsi generic sg0 type 0
  592. [ 3.653519] [c5] sd 1:0:0:0: [sda] 234441632 512-byte logical blocks: (120 GB/111 GiB)
  593. [ 3.654643] [c5] sd 1:0:0:0: [sda] Write Protect is off
  594. [ 3.654693] [c5] sd 1:0:0:0: [sda] Mode Sense: 5f 00 10 08
  595. [ 3.655787] [c5] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
  596. [ 3.672908] [c5] sda: sda1
  597. [ 3.677559] [c5] sd 1:0:0:0: [sda] Attached SCSI disk
  598. [ 3.698774] [c7] scsi 0:0:0:0: Direct-Access SRT USB 3.0 JET 16G 1100 PQ: 0 ANSI: 6
  599. [ 3.700444] [c7] sd 0:0:0:0: Attached scsi generic sg1 type 0
  600. [ 3.701328] [c7] sd 0:0:0:0: [sdb] 31457280 512-byte logical blocks: (16.1 GB/15.0 GiB)
  601. [ 3.701924] [c7] sd 0:0:0:0: [sdb] Write Protect is off
  602. [ 3.701970] [c7] sd 0:0:0:0: [sdb] Mode Sense: 22 00 00 00
  603. [ 3.702525] [c7] sd 0:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
  604. [ 3.707765] [c7] sdb: sdb1
  605. [ 3.710889] [c7] sd 0:0:0:0: [sdb] Attached SCSI removable disk
  606. [ 3.810135] [c4] exynos5-hsi2c 12cb0000.hsi2c: Register dump(suspended : 0)
  607. : CTL 0x00000089
  608. : FIFO_CTL 0x00200203
  609. : TRAILING_CTL 0x0000000f
  610. : CLK_CTL 0x00000000
  611. : CLK_SLOT 0x00000000
  612. : INT_EN 0x00000000
  613. : INT_STAT 0x00000000
  614. : ERR_STAT 0x00000000
  615. : FIFO_STAT 0x01000002
  616. : TXDATA 0xdeadbeaf
  617. : RXDATA 0x00000000
  618. : CONF 0xb00300ff
  619. : AUTO_CONF 0x00020002
  620. : TIMEOUT 0x000000ff
  621. : MANUAL_CMD 0x00000000
  622. : TRANS_STAT 0x00000000
  623. : TIMING_HS1 0x4b4b4b00
  624. : TIMING_HS2 0x25004b4b
  625. : TIMING_HS3 0x00000096
  626. : TIMING_FS1 0x4b4b4b00
  627. : TIMING_FS2 0x25004b4b
  628. : TIMING_FS3 0x00000096
  629. : TIMING_SLA 0x00000025
  630. : ADDR 0x00004000
  631. [ 3.810499] [c4] exynos5-hsi2c 12cb0000.hsi2c: tx timeout
  632. [ 3.810640] [c4] exynos5-hsi2c 12cb0000.hsi2c: xfer message failed
  633. [ 3.810707] [c4] max98090 1-0010: Failed to reset codec: -5
  634. [ 3.810749] [c4] max98090 1-0010: Failed to device reset : -5
  635. [ 3.810791] [c4] max98090 1-0010: ASoC: failed to probe CODEC -5
  636. [ 3.811057] [c4] odroid-audio sound.13: ASoC: failed to instantiate card -5
  637. [ 3.811436] [c4] odroid-audio sound.13: snd_soc_register_card() failed(max98090): -5
  638. [ 3.812383] [c4] dummy-codec dummy-codec.11: ASoC: Failed to create Capture debugfs file
  639. [ 3.812458] [c4] dummy-codec dummy-codec.11: ASoC: Failed to create Playback debugfs file
  640. [ 3.812523] [c4] dummy-codec dummy-codec.11: ASoC: Failed to create Capture debugfs file
  641. [ 3.812586] [c4] dummy-codec dummy-codec.11: ASoC: Failed to create Playback debugfs file
  642. [ 3.812649] [c4] dummy-codec dummy-codec.11: ASoC: Failed to create Capture debugfs file
  643. [ 3.812712] [c4] dummy-codec dummy-codec.11: ASoC: Failed to create Playback debugfs file
  644. [ 3.813455] [c4] odroid-audio sound.13: dummy-aif1 <-> samsung-i2s-sec mapping ok
  645. [ 3.814508] [c4] odroid-audio sound.13: dummy-aif2 <-> 3830000.i2s mapping ok
  646. [ 3.817803] [c4] Netfilter messages via NETLINK v0.30.
  647. [ 3.818549] [c4] arp_tables: (C) 2002 David S. Miller
  648. [ 3.818759] [c4] TCP: cubic registered
  649. [ 3.818799] [c4] Initializing XFRM netlink socket
  650. [ 3.819601] [c4] NET: Registered protocol family 10
  651. [ 3.821422] [c4] NET: Registered protocol family 17
  652. [ 3.821509] [c4] NET: Registered protocol family 15
  653. [ 3.821587] [c4] NET: Registered protocol family 35
  654. [ 3.822103] [c4] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
  655. [ 3.822223] [c4] Registering SWP/SWPB emulation handler
  656. [ 3.822264] [c4] SRAM ASV group [5] : MIF(925000), G3D(950000)
  657. [ 3.828695] [c4] registered taskstats version 1
  658. [ 3.828912] [c4] hdmi-en: disabling
  659. [ 3.828946] [c4] MAIN_DC: disabling
  660. [ 3.828980] [c4] regulator-dummy: disabling
  661. [ 3.829970] [c4] of_get_named_gpio_flags exited with status 11
  662. [ 3.830178] [c4] gpiod_set_debounce: gpio-11 status -22
  663. [ 3.830680] [c4] input: gpio_keys.7 as /devices/gpio_keys.7/input/input0
  664. [ 3.833253] [c4] s2m-rtc s2m-rtc: setting system clock to 2016-11-07 07:46:37 UTC (1478504797)
  665. [ 3.833307] [c4] CPUFREQ of CA7 L0 : 1300000 uV
  666. [ 3.833339] [c4] CPUFREQ of CA7 L0 : ABB 8
  667. [ 3.833368] [c4] CPUFREQ of CA7 L1 : 1287500 uV
  668. [ 3.833398] [c4] CPUFREQ of CA7 L1 : ABB 255
  669. [ 3.833427] [c4] CPUFREQ of CA7 L2 : 1212500 uV
  670. [ 3.833456] [c4] CPUFREQ of CA7 L2 : ABB 255
  671. [ 3.833485] [c4] CPUFREQ of CA7 L3 : 1162500 uV
  672. [ 3.833514] [c4] CPUFREQ of CA7 L3 : ABB 255
  673. [ 3.833542] [c4] CPUFREQ of CA7 L4 : 1112500 uV
  674. [ 3.833571] [c4] CPUFREQ of CA7 L4 : ABB 255
  675. [ 3.833599] [c4] CPUFREQ of CA7 L5 : 1075000 uV
  676. [ 3.833628] [c4] CPUFREQ of CA7 L5 : ABB 255
  677. [ 3.833656] [c4] CPUFREQ of CA7 L6 : 1037500 uV
  678. [ 3.833685] [c4] CPUFREQ of CA7 L6 : ABB 255
  679. [ 3.833714] [c4] CPUFREQ of CA7 L7 : 1000000 uV
  680. [ 3.833742] [c4] CPUFREQ of CA7 L7 : ABB 255
  681. [ 3.833771] [c4] CPUFREQ of CA7 L8 : 962500 uV
  682. [ 3.833800] [c4] CPUFREQ of CA7 L8 : ABB 255
  683. [ 3.833828] [c4] CPUFREQ of CA7 L9 : 925000 uV
  684. [ 3.833856] [c4] CPUFREQ of CA7 L9 : ABB 255
  685. [ 3.833885] [c4] CPUFREQ of CA7 L10 : 900000 uV
  686. [ 3.833914] [c4] CPUFREQ of CA7 L10 : ABB 255
  687. [ 3.833943] [c4] CPUFREQ of CA7 L11 : 900000 uV
  688. [ 3.833972] [c4] CPUFREQ of CA7 L11 : ABB 255
  689. [ 3.834000] [c4] CPUFREQ of CA7 L12 : 900000 uV
  690. [ 3.834029] [c4] CPUFREQ of CA7 L12 : ABB 255
  691. [ 3.834058] [c4] CPUFREQ of CA7 L13 : 900000 uV
  692. [ 3.834087] [c4] CPUFREQ of CA7 L13 : ABB 255
  693. [ 3.834115] [c4] CPUFREQ of CA7 L14 : 900000 uV
  694. [ 3.834144] [c4] CPUFREQ of CA7 L14 : ABB 255
  695. [ 3.834434] [c4] kfc clock[800000], mx_mspll clock[666000]
  696. [ 3.834478] [c4] [SET_EMA_TEST] volt : 887500 value : 0x44
  697. [ 3.834510] [c4] [SET_EMA_TEST] volt : 937500 value : 0x44
  698. [ 3.834542] [c4] [SET_EMA_TEST] volt : 1032500 value : 0x33
  699. [ 3.834574] [c4] [SET_EMA_TEST] volt : 1142500 value : 0x11
  700. [ 3.834605] [c4] [SET_EMA_TEST] volt : 1167500 value : 0x11
  701. [ 3.834639] [c4] CPUFREQ of CA15 L0 : 1362500 uV
  702. [ 3.834669] [c4] CPUFREQ of CA15 L0 : ABB 8
  703. [ 3.834697] [c4] CPUFREQ of CA15 L1 : 1362500 uV
  704. [ 3.834726] [c4] CPUFREQ of CA15 L1 : ABB 8
  705. [ 3.834754] [c4] CPUFREQ of CA15 L2 : 1362500 uV
  706. [ 3.834782] [c4] CPUFREQ of CA15 L2 : ABB 8
  707. [ 3.834810] [c4] CPUFREQ of CA15 L3 : 1312500 uV
  708. [ 3.834840] [c4] CPUFREQ of CA15 L3 : ABB 255
  709. [ 3.834868] [c4] CPUFREQ of CA15 L4 : 1262500 uV
  710. [ 3.834897] [c4] CPUFREQ of CA15 L4 : ABB 255
  711. [ 3.834925] [c4] CPUFREQ of CA15 L5 : 1187500 uV
  712. [ 3.834954] [c4] CPUFREQ of CA15 L5 : ABB 255
  713. [ 3.834982] [c4] CPUFREQ of CA15 L6 : 1137500 uV
  714. [ 3.835011] [c4] CPUFREQ of CA15 L6 : ABB 255
  715. [ 3.835040] [c4] CPUFREQ of CA15 L7 : 1100000 uV
  716. [ 3.835128] [c4] CPUFREQ of CA15 L7 : ABB 255
  717. [ 3.835160] [c4] CPUFREQ of CA15 L8 : 1062500 uV
  718. [ 3.835190] [c4] CPUFREQ of CA15 L8 : ABB 255
  719. [ 3.835219] [c4] CPUFREQ of CA15 L9 : 1025000 uV
  720. [ 3.835248] [c4] CPUFREQ of CA15 L9 : ABB 255
  721. [ 3.835277] [c4] CPUFREQ of CA15 L10 : 1000000 uV
  722. [ 3.835306] [c4] CPUFREQ of CA15 L10 : ABB 255
  723. [ 3.835335] [c4] CPUFREQ of CA15 L11 : 987500 uV
  724. [ 3.835364] [c4] CPUFREQ of CA15 L11 : ABB 255
  725. [ 3.835393] [c4] CPUFREQ of CA15 L12 : 962500 uV
  726. [ 3.835422] [c4] CPUFREQ of CA15 L12 : ABB 255
  727. [ 3.835451] [c4] CPUFREQ of CA15 L13 : 937500 uV
  728. [ 3.835479] [c4] CPUFREQ of CA15 L13 : ABB 255
  729. [ 3.835508] [c4] CPUFREQ of CA15 L14 : 912500 uV
  730. [ 3.835537] [c4] CPUFREQ of CA15 L14 : ABB 255
  731. [ 3.835566] [c4] CPUFREQ of CA15 L15 : 900000 uV
  732. [ 3.835595] [c4] CPUFREQ of CA15 L15 : ABB 255
  733. [ 3.835624] [c4] CPUFREQ of CA15 L16 : 900000 uV
  734. [ 3.835652] [c4] CPUFREQ of CA15 L16 : ABB 255
  735. [ 3.835681] [c4] CPUFREQ of CA15 L17 : 900000 uV
  736. [ 3.835710] [c4] CPUFREQ of CA15 L17 : ABB 255
  737. [ 3.835738] [c4] CPUFREQ of CA15 L18 : 900000 uV
  738. [ 3.835767] [c4] CPUFREQ of CA15 L18 : ABB 255
  739. [ 3.835796] [c4] CPUFREQ of CA15 L19 : 900000 uV
  740. [ 3.835825] [c4] CPUFREQ of CA15 L19 : ABB 255
  741. [ 3.835854] [c4] CPUFREQ of CA15 L20 : 900000 uV
  742. [ 3.835883] [c4] CPUFREQ of CA15 L20 : ABB 255
  743. [ 3.835911] [c4] CPUFREQ of CA15 L21 : 900000 uV
  744. [ 3.835940] [c4] CPUFREQ of CA15 L21 : ABB 255
  745. [ 3.835969] [c4] CPUFREQ of CA15 L22 : 900000 uV
  746. [ 3.835998] [c4] CPUFREQ of CA15 L22 : ABB 255
  747. [ 3.836339] [c4] eagle clock[800000], mpll clock[800000]
  748. [ 3.840645] [c4] Exynos: Kernel Thermal management registered
  749. [ 3.841123] [c4] ### dt-test ### No testcase data in device tree; not running tests
  750. [ 3.878156] [c4] MIF 825000Khz ASV is 937500uV
  751. [ 3.878234] [c4] DEVFREQ(MIF) : 825000Khz, ABB 14
  752. [ 3.878250] [c4] MIF 728000Khz ASV is 900000uV
  753. [ 3.878266] [c4] DEVFREQ(MIF) : 728000Khz, ABB 14
  754. [ 3.878280] [c4] MIF 633000Khz ASV is 862500uV
  755. [ 3.878296] [c4] DEVFREQ(MIF) : 633000Khz, ABB 14
  756. [ 3.878309] [c4] MIF 543000Khz ASV is 837500uV
  757. [ 3.878325] [c4] DEVFREQ(MIF) : 543000Khz, ABB 14
  758. [ 3.878338] [c4] MIF 413000Khz ASV is 800000uV
  759. [ 3.878354] [c4] DEVFREQ(MIF) : 413000Khz, ABB 14
  760. [ 3.878367] [c4] MIF 275000Khz ASV is 787500uV
  761. [ 3.878383] [c4] DEVFREQ(MIF) : 275000Khz, ABB 14
  762. [ 3.878396] [c4] MIF 206000Khz ASV is 787500uV
  763. [ 3.878411] [c4] DEVFREQ(MIF) : 206000Khz, ABB 14
  764. [ 3.878425] [c4] MIF 165000Khz ASV is 787500uV
  765. [ 3.878440] [c4] DEVFREQ(MIF) : 165000Khz, ABB 14
  766. [ 3.878453] [c4] MIF 138000Khz ASV is 787500uV
  767. [ 3.878469] [c4] DEVFREQ(MIF) : 138000Khz, ABB 14
  768. [ 3.879768] [c4] MIF: set ASV freq 825000, voltage 937500
  769. [ 3.880397] [c4] INT 600000Khz ASV is 925000uV
  770. [ 3.880422] [c4] DEVFREQ(INT) : 600000Khz, ABB 255
  771. [ 4.880092] [c4] PM DOMAIN: Power off unused power domains.
  772. [ 4.880615] [c4] ALSA device list:
  773. [ 4.880630] [c4] #0: odroid-audio
  774. [ 4.881071] [c4] Freeing unused kernel memory: 424K (c08ad000 - c0917000)
  775. [ 4.915397] [c7] systemd-udevd[147]: starting version 215
  776. [ 5.871337] [c4] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  777. [ 6.028653] [c5] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
  778. [ 6.028931] [c5] systemd[1]: Detected architecture 'arm'.
  779. [ 6.036402] [c5] systemd[1]: Set hostname to <odroid>.
  780. [ 6.265556] [c6] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
  781. [ 6.267019] [c6] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
  782. [ 6.267340] [c6] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  783. [ 6.267383] [c6] systemd[1]: Starting Remote File Systems (Pre).
  784. [ 6.267828] [c6] systemd[1]: Reached target Remote File Systems (Pre).
  785. [ 6.267897] [c6] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
  786. [ 6.268134] [c6] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  787. [ 6.268174] [c6] systemd[1]: Starting Paths.
  788. [ 6.268478] [c6] systemd[1]: Reached target Paths.
  789. [ 6.268586] [c6] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
  790. [ 6.269407] [c6] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  791. [ 6.269462] [c6] systemd[1]: Starting Encrypted Volumes.
  792. [ 6.269775] [c6] systemd[1]: Reached target Encrypted Volumes.
  793. [ 6.269813] [c6] systemd[1]: Starting Swap.
  794. [ 6.270171] [c6] systemd[1]: Reached target Swap.
  795. [ 6.270210] [c6] systemd[1]: Expecting device dev-disk-by\x2duuid-219a7a4a\x2d196b\x2d4156\x2da176\x2df52e6b11c9c3.device...
  796. [ 6.270511] [c6] systemd[1]: Starting mnt-usb_2.automount.
  797. [ 6.274061] [c6] systemd[1]: Set up automount mnt-usb_2.automount.
  798. [ 6.274111] [c6] systemd[1]: Expecting device dev-disk-by\x2duuid-96C3\x2d9298.device...
  799. [ 6.274402] [c6] systemd[1]: Expecting device dev-disk-by\x2duuid-923cb99c\x2da4fd\x2d47e7\x2d99ca\x2deb260494eea7.device...
  800. [ 6.274701] [c6] systemd[1]: Starting Root Slice.
  801. [ 6.275210] [c6] systemd[1]: Created slice Root Slice.
  802. [ 6.275246] [c6] systemd[1]: Starting User and Session Slice.
  803. [ 6.275820] [c6] systemd[1]: Created slice User and Session Slice.
  804. [ 6.275857] [c6] systemd[1]: Starting Delayed Shutdown Socket.
  805. [ 6.276280] [c6] systemd[1]: Listening on Delayed Shutdown Socket.
  806. [ 6.276317] [c6] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
  807. [ 6.276784] [c6] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  808. [ 6.276823] [c6] systemd[1]: Starting Journal Socket (/dev/log).
  809. [ 6.277286] [c6] systemd[1]: Listening on Journal Socket (/dev/log).
  810. [ 6.277341] [c6] systemd[1]: Starting udev Control Socket.
  811. [ 6.277724] [c6] systemd[1]: Listening on udev Control Socket.
  812. [ 6.277775] [c6] systemd[1]: Starting udev Kernel Socket.
  813. [ 6.278138] [c6] systemd[1]: Listening on udev Kernel Socket.
  814. [ 6.278180] [c6] systemd[1]: Starting Journal Socket.
  815. [ 6.278630] [c6] systemd[1]: Listening on Journal Socket.
  816. [ 6.278690] [c6] systemd[1]: Starting System Slice.
  817. [ 6.279204] [c6] systemd[1]: Created slice System Slice.
  818. [ 6.279257] [c6] systemd[1]: Started File System Check on Root Device.
  819. [ 6.279290] [c6] systemd[1]: Starting system-systemd\x2dfsck.slice.
  820. [ 6.279857] [c6] systemd[1]: Created slice system-systemd\x2dfsck.slice.
  821. [ 6.279894] [c6] systemd[1]: Starting system-getty.slice.
  822. [ 6.280543] [c6] systemd[1]: Created slice system-getty.slice.
  823. [ 6.280679] [c6] systemd[1]: Starting Increase datagram queue length...
  824. [ 6.283816] [c6] systemd[1]: Starting Restore / save the current clock...
  825. [ 6.288532] [c6] systemd[1]: Starting Nameserver information manager...
  826. [ 6.292159] [c6] systemd[1]: Starting udev Coldplug all Devices...
  827. [ 6.296144] [c6] systemd[1]: Mounting Debug File System...
  828. [ 6.305019] [c5] systemd[1]: Starting Load Kernel Modules...
  829. [ 6.308828] [c5] systemd[1]: Mounting POSIX Message Queue File System...
  830. [ 6.314718] [c5] systemd[1]: Started Set Up Additional Binary Formats.
  831. [ 6.315019] [c5] systemd[1]: Mounted Huge Pages File System.
  832. [ 6.326980] [c5] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  833. [ 6.331465] [c5] systemd[1]: Starting LSB: Set keymap...
  834. [ 6.336198] [c6] systemd[1]: Starting Slices.
  835. [ 6.336670] [c6] systemd[1]: Reached target Slices.
  836. [ 6.343807] [c6] systemd[1]: Mounted POSIX Message Queue File System.
  837. [ 6.344633] [c6] systemd[1]: Mounted Debug File System.
  838. [ 6.348762] [c6] systemd[1]: Started Increase datagram queue length.
  839. [ 6.360455] [c6] systemd[1]: Started Restore / save the current clock.
  840. [ 6.362417] [c5] fuse init (API version 7.22)
  841. [ 6.371619] [c5] systemd[1]: Started Create list of required static device nodes for the current kernel.
  842. [ 6.373718] [c5] systemd[1]: Started LSB: Set keymap.
  843. [ 6.374929] [c4] of_get_named_gpio_flags exited with status 190
  844. [ 6.374951] [c4] of_get_named_gpio_flags exited with status 25
  845. [ 6.378185] [c5] systemd[1]: Started Nameserver information manager.
  846. [ 6.383004] [c4] of_get_named_gpio_flags exited with status 190
  847. [ 6.391061] [c6] systemd[1]: Time has been changed
  848. [ 6.398010] [c5] of_get_named_gpio_flags exited with status 25
  849. [ 6.398372] [c5] of_get_named_gpio_flags exited with status 174
  850. [ 6.399433] [c5] ads7846 spi1.1: touchscreen, irq 534
  851. [ 6.400683] [c5] input: ADS7846 Touchscreen as /devices/12d30000.spi/spi_master/spi1/spi1.1/input/input1
  852. [ 6.402272] [c5] PM DOMAIN: pd-isp, Device : 131a0000.spi Registered
  853. [ 6.402320] [c5] s3c64xx-spi 131a0000.spi: spi bus clock parent not specified, using clock at index 0 as parent
  854. [ 6.402347] [c5] s3c64xx-spi 131a0000.spi: number of chip select lines not specified, assuming 1 chip select line
  855. [ 6.402742] [c5] PM DOMAIN: pd-isp, Device : 131b0000.spi Registered
  856. [ 6.402784] [c5] s3c64xx-spi 131b0000.spi: spi bus clock parent not specified, using clock at index 0 as parent
  857. [ 6.402811] [c5] s3c64xx-spi 131b0000.spi: number of chip select lines not specified, assuming 1 chip select line
  858. [ 6.413737] [c6] fbtft_device: SPI devices registered:
  859. [ 6.413771] [c6] fbtft_device: spidev spi1.0 1000kHz 8 bits mode=0x00
  860. [ 6.413792] [c6] fbtft_device: ads7846 spi1.1 1000kHz 8 bits mode=0x00
  861. [ 6.413810] [c6] fbtft_device: 'fb' Platform devices registered:
  862. [ 6.414017] [c6] fbtft_device: Deleting spi1.0
  863. [ 6.415810] [c6] fbtft_device: GPIOS used by 'hktft9340':
  864. [ 6.415832] [c6] fbtft_device: 'reset' = GPIO21
  865. [ 6.415847] [c6] fbtft_device: 'dc' = GPIO22
  866. [ 6.415863] [c6] fbtft_device: 'led' = GPIO18
  867. [ 6.415879] [c6] fbtft_device: SPI devices registered:
  868. [ 6.415900] [c6] fbtft_device: ads7846 spi1.1 1000kHz 8 bits mode=0x00
  869. [ 6.415921] [c6] fbtft_device: fb_ili9340 spi1.0 40000kHz 8 bits mode=0x00
  870. [ 6.419694] [c5] systemd[1]: Started Load Kernel Modules.
  871. [ 6.455862] [c5] systemd[1]: Starting Apply Kernel Variables...
  872. [ 6.460364] [c5] systemd[1]: Mounting Configuration File System...
  873. [ 6.465190] [c5] systemd[1]: Mounting FUSE Control File System...
  874. [ 6.469738] [c6] systemd[1]: Starting Create Static Device Nodes in /dev...
  875. [ 6.474159] [c7] systemd[1]: Starting Syslog Socket.
  876. [ 6.474706] [c7] systemd[1]: Listening on Syslog Socket.
  877. [ 6.474884] [c7] systemd[1]: Starting Journal Service...
  878. [ 6.479413] [c5] systemd[1]: Started Journal Service.
  879. [ 6.543599] [c6] systemd-udevd[284]: starting version 215
  880. [ 6.854124] [c6] [d:0, c:0] s5p_mfc_open:1629: NORMAL instance is opened [0:1]
  881. [ 6.856615] [c6] [d:0] s5p_mfc_alloc_firmware:122: Port for DRM F/W : 0xafc00000
  882. [ 6.862217] [c6] [d:0] s5p_mfc_init_memctrl:304: [1] Base Address : 10000000
  883. [ 6.862928] [c6] [d:0] mfc_init_hw:426: MFC v8.0, F/W: 14yy, 01mm, 13dd (D)
  884. [ 6.863176] [c6] [d:0, c:0] s5p_mfc_open:1725: MFC open completed [0:1] dev = de2c3010, ctx = de2c5800
  885. [ 6.863605] [c6] [d:0, c:0] s5p_mfc_release:1883: MFC driver release is called [0:1], is_drm(0)
  886. [ 6.863740] [c6] s5p_mfc_dev_release:1801: power off
  887. [ 6.865194] [c6] [d:0] s5p_mfc_release:2037: mfc driver release finished [0:0], dev = de2c3010
  888. [ 6.882324] [c6] [d:0, c:0] s5p_mfc_open:1629: NORMAL instance is opened [0:1]
  889. [ 6.883623] [c6] [d:0] s5p_mfc_alloc_firmware:122: Port for DRM F/W : 0xafc00000
  890. [ 6.889539] [c6] [d:0] s5p_mfc_init_memctrl:304: [1] Base Address : 10000000
  891. [ 6.890490] [c6] [d:0] mfc_init_hw:426: MFC v8.0, F/W: 14yy, 01mm, 13dd (D)
  892. [ 6.894016] [c4] [d:0, c:0] s5p_mfc_open:1725: MFC open completed [0:1] dev = de2c3010, ctx = de2c5800
  893. [ 6.894434] [c4] [d:0, c:0] s5p_mfc_release:1883: MFC driver release is called [0:1], is_drm(0)
  894. [ 6.894516] [c4] s5p_mfc_dev_release:1801: power off
  895. [ 6.897618] [c4] [d:0] s5p_mfc_release:2037: mfc driver release finished [0:0], dev = de2c3010
  896. [ 6.919964] [c4] s3c-i2c 12c60000.i2c: slave address 0x00
  897. [ 6.945539] [c5] i2c-core: driver [INA231] using legacy suspend method
  898. [ 6.945585] [c5] i2c-core: driver [INA231] using legacy resume method
  899. [ 6.948683] [c6] INA231 3-0040: I2C write error: (-6) reg: 0x0
  900. [ 6.948722] [c6] INA231 3-0040: ============= Probe INA231 Fail! : sensor_arm (0xFFFFFFFA) =============
  901. [ 6.969734] [c3] INA231 3-0041: I2C write error: (-6) reg: 0x0
  902. [ 6.969782] [c3] INA231 3-0041: ============= Probe INA231 Fail! : sensor_mem (0xFFFFFFFA) =============
  903. [ 7.006843] [c3] INA231 3-0044: I2C write error: (-6) reg: 0x0
  904. [ 7.006891] [c3] INA231 3-0044: ============= Probe INA231 Fail! : sensor_g3d (0xFFFFFFFA) =============
  905. [ 7.031947] [c6] EXT4-fs (mmcblk0p2): re-mounted. Opts: discard
  906. [ 7.038224] [c7] INA231 3-0045: I2C write error: (-6) reg: 0x0
  907. [ 7.038267] [c7] INA231 3-0045: ============= Probe INA231 Fail! : sensor_kfc (0xFFFFFFFA) =============
  908. [ 7.038383] [c7] s3c-i2c 12c60000.i2c: i2c-3: S3C I2C adapter
  909. [ 7.038862] [c7] s3c-i2c 12c70000.i2c: slave address 0x00
  910. [ 7.039878] [c7] s3c-i2c 12c70000.i2c: i2c-4: S3C I2C adapter
  911. [ 7.285633] [c5] Console: switching to colour frame buffer device 40x30
  912. [ 7.286495] [c5] graphics fb0: fb_ili9340 frame buffer, 320x240, 150 KiB video memory, 4 KiB DMA buffer memory, fps=20, spi1.0 at 40 MHz
  913. [ 7.387596] [c6] usbcore: registered new interface driver r8152
  914. [ 7.394905] [c7] usbcore: registered new interface driver cdc_ether
  915. [ 7.523342] [c6] usb 6-1: reset SuperSpeed USB device number 2 using xhci-hcd
  916. [ 7.535942] [c6] usb 6-1: Parent hub missing LPM exit latency info. Power management will be impacted.
  917. [ 7.537022] [c6] xhci-hcd xhci-hcd.5.auto: xHCI xhci_drop_endpoint called with disabled ep dd99d3c0
  918. [ 7.537821] [c6] xhci-hcd xhci-hcd.5.auto: xHCI xhci_drop_endpoint called with disabled ep dd99d3ec
  919. [ 7.538637] [c6] xhci-hcd xhci-hcd.5.auto: xHCI xhci_drop_endpoint called with disabled ep dd99d418
  920. [ 7.628253] [c6] r8152 6-1:1.0 eth0: v2.07.0 (2016/06/14)
  921. [ 7.628868] [c6] r8152 6-1:1.0 eth0: This product is covered by one or more of the following patents:
  922. US6,570,884, US6,115,776, and US6,327,625.
  923.  
  924. [ 7.885442] [c4] systemd-udevd[310]: renamed network interface eth0 to eth1
  925. [ 8.189736] [c4] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
  926. [ 8.223571] [c4] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
  927. [ 8.418434] [c5] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
  928. [ 8.515591] [c7] Key type dns_resolver registered
  929. [ 8.529886] [c7] RPC: Registered named UNIX socket transport module.
  930. [ 8.530500] [c7] RPC: Registered udp transport module.
  931. [ 8.530968] [c7] RPC: Registered tcp transport module.
  932. [ 8.531449] [c7] RPC: Registered tcp NFSv4.1 backchannel transport module.
  933. [ 8.565474] [c4] NFS: Registering the id_resolver key type
  934. [ 8.566073] [c4] Key type id_resolver registered
  935. [ 8.566576] [c4] Key type id_legacy registered
  936. [ 8.785979] [c6] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  937. [ 11.092604] [c0] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
  938. [ 12.462638] [c7] systemd-journald[276]: Received request to flush runtime journal from PID 1
  939. [ 31.998214] [c4] Adding 2047456k swap on /home/john/.swapfile. Priority:-1 extents:135 across:11755516k SS
RAW Paste Data