API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Feb 18th, 2019
106
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 73.52 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0
  2. [ 0.000000] Initializing cgroup subsys cpuset
  3. [ 0.000000] Initializing cgroup subsys cpu
  4. [ 0.000000] Initializing cgroup subsys cpuacct
  5. [ 0.000000] Linux version 4.4.154-nuumio-sdio-defer-f806786cee (nuumio@b89e317bd563) (gcc version 7.3.0 (Ubuntu/Linaro 7.3.0-27ubuntu1~18.04) ) #1 SMP Sun Feb 17 16:24:15 UTC 2019
  6. [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
  7. [ 0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
  8. [ 0.000000] bootconsole [uart0] enabled
  9. [ 0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
  10. [ 0.000000] On node 0 totalpages: 1015296
  11. [ 0.000000] DMA zone: 15864 pages used for memmap
  12. [ 0.000000] DMA zone: 0 pages reserved
  13. [ 0.000000] DMA zone: 1015296 pages, LIFO batch:31
  14. [ 0.000000] psci: probing for conduit method from DT.
  15. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  16. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  17. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  18. [ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc0f7edd000 s46248 r8192 d31576 u86016
  19. [ 0.000000] pcpu-alloc: s46248 r8192 d31576 u86016 alloc=21*4096
  20. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
  21. [ 0.000000] Detected VIPT I-cache on CPU0
  22. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  23. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 999432
  24. [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=9e:da:8f:ae:43:c3 eth1addr= serial=96ed659a4f7abc3 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 root=LABEL=linux-root rootwait rootfstype=ext4 rkdwmmc_defer_time=950
  25. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  26. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
  27. [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
  28. [ 0.000000] software IO TLB [mem 0xf7e95000-0xf7ed5000] (0MB) mapped at [ffffffc0f7e95000-ffffffc0f7ed4fff]
  29. [ 0.000000] Memory: 3961232K/4061184K available (12158K kernel code, 1726K rwdata, 4388K rodata, 1216K init, 768K bss, 99952K reserved, 0K cma-reserved)
  30. [ 0.000000] Virtual kernel memory layout:
  31. modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
  32. vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB)
  33. .init : 0xffffff80090b0000 - 0xffffff80091e0000 ( 1216 KB)
  34. .text : 0xffffff8008080000 - 0xffffff8008c60000 ( 12160 KB)
  35. .rodata : 0xffffff8008c60000 - 0xffffff80090b0000 ( 4416 KB)
  36. .data : 0xffffff80091e0000 - 0xffffff800938f808 ( 1727 KB)
  37. vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
  38. 0xffffffbdc0008000 - 0xffffffbdc3e00000 ( 61 MB actual)
  39. fixed : 0xffffffbffe7fb000 - 0xffffffbffec00000 ( 4116 KB)
  40. PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB)
  41. memory : 0xffffffc000200000 - 0xffffffc0f8000000 ( 3966 MB)
  42. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  43. [ 0.000000] Hierarchical RCU implementation.
  44. [ 0.000000] Build-time adjustment of leaf fanout to 64.
  45. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
  46. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
  47. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  48. [ 0.000000] GIC: Using split EOI/Deactivate mode
  49. [ 0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
  50. [ 0.000000] ITS: allocated 65536 Devices @f2900000 (psz 64K, shr 0)
  51. [ 0.000000] ITS: using cache flushing for cmd queue
  52. [ 0.000000] GIC: using LPI property table @0x00000000f2890000
  53. [ 0.000000] ITS: Allocated 1792 chunks for LPIs
  54. [ 0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
  55. [ 0.000000] CPU0: using LPI pending table @0x00000000f28a0000
  56. [ 0.000000] GIC: using cache flushing for LPI property table
  57. [ 0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
  58. [ 0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
  59. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  60. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  61. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  62. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  63. [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
  64. [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
  65. [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
  66. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  67. [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  68. [ 0.001991] Console: colour dummy device 80x25
  69. [ 0.002453] console [tty0] enabled
  70. [ 0.002781] bootconsole [uart0] disabled
  71. [ 0.003163] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  72. [ 0.003190] pid_max: default: 32768 minimum: 301
  73. [ 0.003304] Security Framework initialized
  74. [ 0.003320] Yama: becoming mindful.
  75. [ 0.003349] AppArmor: AppArmor disabled by boot time parameter
  76. [ 0.003413] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
  77. [ 0.003433] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
  78. [ 0.004167] Initializing cgroup subsys io
  79. [ 0.004192] Initializing cgroup subsys memory
  80. [ 0.004230] Initializing cgroup subsys devices
  81. [ 0.004250] Initializing cgroup subsys freezer
  82. [ 0.004269] Initializing cgroup subsys net_cls
  83. [ 0.004288] Initializing cgroup subsys perf_event
  84. [ 0.004308] Initializing cgroup subsys net_prio
  85. [ 0.004331] Initializing cgroup subsys hugetlb
  86. [ 0.004348] Initializing cgroup subsys pids
  87. [ 0.004394] ftrace: allocating 45075 entries in 177 pages
  88. [ 0.108818] sched-energy: Sched-energy-costs installed from DT
  89. [ 0.108847] CPU0: update cpu_capacity 401
  90. [ 0.108908] ASID allocator initialised with 32768 entries
  91. [ 0.111906] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
  92. [ 0.112384] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
  93. [ 0.113660] Detected VIPT I-cache on CPU1
  94. [ 0.113689] CPU1: found redistributor 1 region 0:0x00000000fef20000
  95. [ 0.113713] CPU1: using LPI pending table @0x00000000f2b40000
  96. [ 0.113755] CPU1: update cpu_capacity 401
  97. [ 0.113759] CPU1: Booted secondary processor [410fd034]
  98. [ 0.114283] Detected VIPT I-cache on CPU2
  99. [ 0.114303] CPU2: found redistributor 2 region 0:0x00000000fef40000
  100. [ 0.114326] CPU2: using LPI pending table @0x00000000f2b70000
  101. [ 0.114353] CPU2: update cpu_capacity 401
  102. [ 0.114356] CPU2: Booted secondary processor [410fd034]
  103. [ 0.114866] Detected VIPT I-cache on CPU3
  104. [ 0.114886] CPU3: found redistributor 3 region 0:0x00000000fef60000
  105. [ 0.114909] CPU3: using LPI pending table @0x00000000f2bc0000
  106. [ 0.114935] CPU3: update cpu_capacity 401
  107. [ 0.114938] CPU3: Booted secondary processor [410fd034]
  108. [ 0.115446] Detected PIPT I-cache on CPU4
  109. [ 0.115470] CPU4: found redistributor 100 region 0:0x00000000fef80000
  110. [ 0.115504] CPU4: using LPI pending table @0x00000000f2bf0000
  111. [ 0.115540] CPU4: update cpu_capacity 1024
  112. [ 0.115543] CPU4: Booted secondary processor [410fd082]
  113. [ 0.116109] Detected PIPT I-cache on CPU5
  114. [ 0.116128] CPU5: found redistributor 101 region 0:0x00000000fefa0000
  115. [ 0.116160] CPU5: using LPI pending table @0x00000000f2030000
  116. [ 0.116187] CPU5: update cpu_capacity 1024
  117. [ 0.116190] CPU5: Booted secondary processor [410fd082]
  118. [ 0.116272] Brought up 6 CPUs
  119. [ 0.116949] SMP: Total of 6 processors activated.
  120. [ 0.116980] CPU features: detected feature: GIC system register CPU interface
  121. [ 0.117018] CPU: All CPU(s) started at EL2
  122. [ 0.117083] alternatives: patching kernel code
  123. [ 0.118450] devtmpfs: initialized
  124. [ 0.133935] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  125. [ 0.133988] futex hash table entries: 2048 (order: 5, 131072 bytes)
  126. [ 0.134458] xor: measuring software checksum speed
  127. [ 0.171926] 8regs : 2874.000 MB/sec
  128. [ 0.211988] 8regs_prefetch: 2571.000 MB/sec
  129. [ 0.252051] 32regs : 3243.000 MB/sec
  130. [ 0.292114] 32regs_prefetch: 2865.000 MB/sec
  131. [ 0.292133] xor: using function: 32regs (3243.000 MB/sec)
  132. [ 0.292168] pinctrl core: initialized pinctrl subsystem
  133. [ 0.292416] regulator-dummy: no parameters
  134. [ 0.293704] Failed to find legacy iommu devices
  135. [ 0.294089] NET: Registered protocol family 16
  136. [ 0.304430] cpuidle: using governor ladder
  137. [ 0.316452] cpuidle: using governor menu
  138. [ 0.316792] vdso: 2 pages (1 code @ ffffff8008c66000, 1 data @ ffffff80091e4000)
  139. [ 0.316846] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  140. [ 0.317278] DMA: preallocated 1024 KiB pool for atomic allocations
  141. [ 0.331756] gpiochip_add_data: registered GPIOs 0 to 31 on device: gpio0
  142. [ 0.331835] gpiochip_add_data: registered GPIOs 32 to 63 on device: gpio1
  143. [ 0.331907] gpiochip_add_data: registered GPIOs 64 to 95 on device: gpio2
  144. [ 0.331985] gpiochip_add_data: registered GPIOs 96 to 127 on device: gpio3
  145. [ 0.332055] gpiochip_add_data: registered GPIOs 128 to 159 on device: gpio4
  146. [ 0.424372] raid6: int64x1 gen() 474 MB/s
  147. [ 0.492468] raid6: int64x1 xor() 409 MB/s
  148. [ 0.560548] raid6: int64x2 gen() 655 MB/s
  149. [ 0.628657] raid6: int64x2 xor() 598 MB/s
  150. [ 0.696790] raid6: int64x4 gen() 1001 MB/s
  151. [ 0.764895] raid6: int64x4 xor() 677 MB/s
  152. [ 0.833009] raid6: int64x8 gen() 760 MB/s
  153. [ 0.901099] raid6: int64x8 xor() 633 MB/s
  154. [ 0.969220] raid6: neonx1 gen() 995 MB/s
  155. [ 1.037308] raid6: neonx1 xor() 678 MB/s
  156. [ 1.105393] raid6: neonx2 gen() 1330 MB/s
  157. [ 1.173512] raid6: neonx2 xor() 995 MB/s
  158. [ 1.241632] raid6: neonx4 gen() 1802 MB/s
  159. [ 1.309726] raid6: neonx4 xor() 1198 MB/s
  160. [ 1.377832] raid6: neonx8 gen() 1696 MB/s
  161. [ 1.445927] raid6: neonx8 xor() 1266 MB/s
  162. [ 1.445946] raid6: using algorithm neonx4 gen() 1802 MB/s
  163. [ 1.445965] raid6: .... xor() 1198 MB/s, rmw enabled
  164. [ 1.445983] raid6: using intx1 recovery algorithm
  165. [ 1.446832] of_get_named_gpiod_flags: parsed 'rockchip,power-ctrl' property of node '/rockchip-suspend[0]' - status (0)
  166. [ 1.446872] of_get_named_gpiod_flags: parsed 'rockchip,power-ctrl' property of node '/rockchip-suspend[1]' - status (0)
  167. [ 1.447110] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/dc-12v[0]'
  168. [ 1.447132] dc_12v: 12000 mV
  169. [ 1.447303] reg-fixed-voltage dc-12v: dc_12v supplying 12000000uV
  170. [ 1.447460] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc3v3-pcie-regulator[0]' - status (0)
  171. [ 1.447505] reg-fixed-voltage vcc3v3-pcie-regulator: Looking up vin-supply from device tree
  172. [ 1.447544] vcc3v3_pcie: supplied by dc_12v
  173. [ 1.447568] dc_12v: could not add device link regulator.2 err -2
  174. [ 1.447608] vcc3v3_pcie: 3300 mV
  175. [ 1.447758] reg-fixed-voltage vcc3v3-pcie-regulator: vcc3v3_pcie supplying 3300000uV
  176. [ 1.447811] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc1v8-s0[0]'
  177. [ 1.447830] vcc1v8_s0: 1800 mV
  178. [ 1.447985] reg-fixed-voltage vcc1v8-s0: vcc1v8_s0 supplying 1800000uV
  179. [ 1.448035] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-sys[0]'
  180. [ 1.448052] reg-fixed-voltage vcc-sys: Looking up vin-supply from device tree
  181. [ 1.448086] vcc_sys: supplied by dc_12v
  182. [ 1.448108] dc_12v: could not add device link regulator.4 err -2
  183. [ 1.448136] vcc_sys: 5000 mV
  184. [ 1.448283] reg-fixed-voltage vcc-sys: vcc_sys supplying 5000000uV
  185. [ 1.448332] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-phy-regulator[0]'
  186. [ 1.448347] vcc_phy: no parameters
  187. [ 1.448499] reg-fixed-voltage vcc-phy-regulator: vcc_phy supplying 0uV
  188. [ 1.448549] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc3v3-sys[0]'
  189. [ 1.448569] reg-fixed-voltage vcc3v3-sys: Looking up vin-supply from device tree
  190. [ 1.448604] vcc3v3_sys: supplied by vcc_sys
  191. [ 1.448626] vcc_sys: could not add device link regulator.6 err -2
  192. [ 1.448653] vcc3v3_sys: 3300 mV
  193. [ 1.448801] reg-fixed-voltage vcc3v3-sys: vcc3v3_sys supplying 3300000uV
  194. [ 1.448937] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc5v0-host-regulator[0]' - status (0)
  195. [ 1.448978] vcc5v0_host: no parameters
  196. [ 1.449139] reg-fixed-voltage vcc5v0-host-regulator: vcc5v0_host supplying 0uV
  197. [ 1.449736] iommu: Adding device ff8f0000.vop to group 0
  198. [ 1.449819] platform ff8f0000.vop: iommu /iommu@ff8f3f00 not found
  199. [ 1.449839] iommu: Removing device ff8f0000.vop from group 0
  200. [ 1.449912] iommu: Adding device ff900000.vop to group 0
  201. [ 1.451103] SCSI subsystem initialized
  202. [ 1.451283] libata version 3.00 loaded.
  203. [ 1.451448] usbcore: registered new interface driver usbfs
  204. [ 1.451509] usbcore: registered new interface driver hub
  205. [ 1.451599] usbcore: registered new device driver usb
  206. [ 1.451702] media: Linux media interface: v0.10
  207. [ 1.451751] Linux video capture interface: v2.00
  208. [ 1.451829] pps_core: LinuxPPS API ver. 1 registered
  209. [ 1.451849] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  210. [ 1.451896] PTP clock support registered
  211. [ 1.452901] Advanced Linux Sound Architecture Driver Initialized.
  212. [ 1.453413] Bluetooth: Core ver 2.21
  213. [ 1.453453] NET: Registered protocol family 31
  214. [ 1.453472] Bluetooth: HCI device and connection manager initialized
  215. [ 1.453497] Bluetooth: HCI socket layer initialized
  216. [ 1.453519] Bluetooth: L2CAP socket layer initialized
  217. [ 1.453556] Bluetooth: SCO socket layer initialized
  218. [ 1.453951] NetLabel: Initializing
  219. [ 1.453971] NetLabel: domain hash size = 128
  220. [ 1.453988] NetLabel: protocols = UNLABELED CIPSOv4
  221. [ 1.454038] NetLabel: unlabeled traffic allowed by default
  222. [ 1.454833] clocksource: Switched to clocksource arch_sys_counter
  223. [ 1.518876] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
  224. [ 1.519112] NET: Registered protocol family 2
  225. [ 1.519554] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
  226. [ 1.519761] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
  227. [ 1.520529] TCP: Hash tables configured (established 32768 bind 32768)
  228. [ 1.520653] UDP hash table entries: 2048 (order: 5, 196608 bytes)
  229. [ 1.520843] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
  230. [ 1.521253] NET: Registered protocol family 1
  231. [ 1.521553] RPC: Registered named UNIX socket transport module.
  232. [ 1.521575] RPC: Registered udp transport module.
  233. [ 1.521593] RPC: Registered tcp transport module.
  234. [ 1.521612] RPC: Registered tcp NFSv4.1 backchannel transport module.
  235. [ 1.521785] PCI: CLS 0 bytes, default 64
  236. [ 1.522295] Trying to unpack rootfs image as initramfs...
  237. [ 1.836870] Freeing initrd memory: 6372K
  238. [ 1.837444] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  239. [ 1.837557] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
  240. [ 1.838653] kvm [1]: 8-bit VMID
  241. [ 1.838673] kvm [1]: Hyp mode initialized successfully
  242. [ 1.838808] kvm [1]: interrupt-controller@fff20000 IRQ10
  243. [ 1.839048] kvm [1]: timer IRQ12
  244. [ 1.842042] audit: initializing netlink subsys (disabled)
  245. [ 1.842092] audit: type=2000 audit(1.776:1): initialized
  246. [ 1.842905] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  247. [ 1.850121] VFS: Disk quotas dquot_6.6.0
  248. [ 1.850290] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  249. [ 1.851743] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  250. [ 1.852874] NFS: Registering the id_resolver key type
  251. [ 1.852915] Key type id_resolver registered
  252. [ 1.852935] Key type id_legacy registered
  253. [ 1.852966] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  254. [ 1.853622] fuse init (API version 7.23)
  255. [ 1.854387] JFS: nTxBlock = 8192, nTxLock = 65536
  256. [ 1.859569] SGI XFS with ACLs, security attributes, realtime, no debug enabled
  257. [ 1.861698] Key type big_key registered
  258. [ 1.861772]
  259. TEE Core Framework initialization (ver 1:0.1)
  260. [ 1.861814] TEE armv7 Driver initialization
  261. [ 1.862205] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"
  262. [ 1.862230] TEE core: Alloc the misc device "opteearmtz00" (id=0)
  263. [ 1.862438] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=62)
  264. [ 1.866316] NET: Registered protocol family 38
  265. [ 1.866362] Key type asymmetric registered
  266. [ 1.866386] Asymmetric key parser 'x509' registered
  267. [ 1.866579] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  268. [ 1.866747] io scheduler noop registered
  269. [ 1.866774] io scheduler deadline registered (default)
  270. [ 1.866848] io scheduler cfq registered
  271. [ 1.867704] phy phy-ff770000.syscon:usb2-phy@e460.0: Looking up phy-supply from device tree
  272. [ 1.867791] vcc5v0_host: could not add device link phy-ff770000.syscon:usb2-phy@e460.0 err -2
  273. [ 1.868090] phy phy-ff770000.syscon:usb2-phy@e460.1: Looking up phy-supply from device tree
  274. [ 1.868101] phy phy-ff770000.syscon:usb2-phy@e460.1: Looking up phy-supply property in node /syscon@ff770000/usb2-phy@e460/otg-port failed
  275. [ 1.868314] phy phy-ff770000.syscon:usb2-phy@e460.1: Looking up vbus-supply from device tree
  276. [ 1.868325] phy phy-ff770000.syscon:usb2-phy@e460.1: Looking up vbus-supply property in node /syscon@ff770000/usb2-phy@e460/otg-port failed
  277. [ 1.868338] phy phy-ff770000.syscon:usb2-phy@e460.1: Failed to get VBUS supply regulator
  278. [ 1.869520] phy phy-ff770000.syscon:phy@f780.2: Looking up phy-supply from device tree
  279. [ 1.869530] phy phy-ff770000.syscon:phy@f780.2: Looking up phy-supply property in node /syscon@ff770000/phy@f780 failed
  280. [ 1.870517] phy phy-ff800000.phy.3: Looking up phy-supply from device tree
  281. [ 1.870528] phy phy-ff800000.phy.3: Looking up phy-supply property in node /phy@ff800000/dp-port failed
  282. [ 1.870624] phy phy-ff800000.phy.4: Looking up phy-supply from device tree
  283. [ 1.870633] phy phy-ff800000.phy.4: Looking up phy-supply property in node /phy@ff800000/usb3-port failed
  284. [ 1.873829] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
  285. [ 1.873870] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
  286. [ 1.875388] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
  287. [ 1.875425] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
  288. [ 1.876478] pwm-regulator vdd-log: GPIO lookup for consumer enable
  289. [ 1.876487] pwm-regulator vdd-log: using device tree for GPIO lookup
  290. [ 1.876497] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/vdd-log[0]'
  291. [ 1.876507] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/vdd-log[0]'
  292. [ 1.876515] pwm-regulator vdd-log: using lookup tables for GPIO lookup
  293. [ 1.876523] pwm-regulator vdd-log: lookup for GPIO enable failed
  294. [ 1.876546] pwm-regulator vdd-log: Looking up pwm-supply from device tree
  295. [ 1.876601] pwm-regulator: supplied by vcc_sys
  296. [ 1.876625] vcc_sys: could not add device link regulator.8 err -2
  297. [ 1.876691] vdd_log: 800 <--> 1400 mV at 896 mV
  298. [ 1.877258] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
  299. [ 1.878908] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 36, base_baud = 1500000) is a 16550A
  300. [ 1.995092] console [ttyS2] enabled
  301. [ 1.996511] [drm] Initialized drm 1.1.0 20060810
  302. [ 2.000607] [drm] Rockchip DRM driver version: v1.0.1
  303. [ 2.001555] usbcore: registered new interface driver udl
  304. [ 2.003297] Unable to detect cache hierarchy for CPU 0
  305. [ 2.004509] brd: module loaded
  306. [ 2.010138] loop: module loaded
  307. [ 2.010465] lkdtm: No crash points registered, enable through debugfs
  308. [ 2.012458] rockchip-spi ff1d0000.spi: Failed to request TX DMA channel
  309. [ 2.013063] rockchip-spi ff1d0000.spi: Failed to request RX DMA channel
  310. [ 2.013662] rockchip-spi ff1d0000.spi: no high_speed pinctrl state
  311. [ 2.014732] m25p80 spi32766.0: gd25q128 (16384 Kbytes)
  312. [ 2.015245] 3 ofpart partitions found on MTD device spi32766.0
  313. [ 2.015774] Creating 3 MTD partitions on "spi32766.0":
  314. [ 2.016245] 0x000000000000-0x0000003f8000 : "loader"
  315. [ 2.017549] 0x0000003f8000-0x000000400000 : "env"
  316. [ 2.018808] 0x0000007c0000-0x000000800000 : "vendor"
  317. [ 2.021543] force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
  318. [ 2.022143] rk_gmac-dwmac fe300000.ethernet: Looking up phy-supply from device tree
  319. [ 2.022249] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
  320. [ 2.022916] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
  321. [ 2.023433] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20).
  322. [ 2.023963] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
  323. [ 2.024695] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
  324. [ 2.025323] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
  325. [ 2.030881] rk_gmac-dwmac fe300000.ethernet: init for RGMII
  326. [ 2.031507] stmmac - user ID: 0x10, Synopsys ID: 0x35
  327. [ 2.031967] Ring mode enabled
  328. [ 2.032251] DMA HW capability register supported
  329. [ 2.032654] Normal descriptors
  330. [ 2.032974] RX Checksum Offload Engine supported (type 2)
  331. [ 2.033471] Wake-Up On Lan supported
  332. [ 2.033840] Enable RX Mitigation via HW Watchdog Timer
  333. [ 2.034412] of_get_named_gpiod_flags: parsed 'snps,reset-gpio' property of node '/ethernet@fe300000[0]' - status (0)
  334. [ 2.109646] libphy: stmmac: probed
  335. [ 2.109977] eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
  336. [ 2.110561] eth%d: PHY ID 001cc916 at 1 IRQ POLL (stmmac-0:01)
  337. [ 2.112427] Rockchip WiFi SYS interface (V1.00) ...
  338. [ 2.113036] usbcore: registered new interface driver cdc_ether
  339. [ 2.113623] usbcore: registered new interface driver rndis_host
  340. [ 2.116130] rockchip-dwc3 usb0: failed to get drvdata dwc3
  341. [ 2.121522] rockchip-dwc3 usb1: fail to get drvdata hcd
  342. [ 2.123186] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  343. [ 2.123789] ehci-pci: EHCI PCI platform driver
  344. [ 2.124249] ehci-platform: EHCI generic platform driver
  345. [ 2.128575] ehci-platform fe3c0000.usb: EHCI Host Controller
  346. [ 2.129287] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 1
  347. [ 2.130101] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000
  348. [ 2.138852] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
  349. [ 2.139566] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  350. [ 2.140183] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  351. [ 2.140845] usb usb1: Product: EHCI Host Controller
  352. [ 2.141292] usb usb1: Manufacturer: Linux 4.4.154-nuumio-sdio-defer-f806786cee ehci_hcd
  353. [ 2.142022] usb usb1: SerialNumber: fe3c0000.usb
  354. [ 2.142965] hub 1-0:1.0: USB hub found
  355. [ 2.143337] hub 1-0:1.0: 1 port detected
  356. [ 2.144206] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  357. [ 2.144778] ohci-platform: OHCI generic platform driver
  358. [ 2.145717] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
  359. [ 2.146503] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 2
  360. [ 2.147314] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000
  361. [ 2.206999] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  362. [ 2.207615] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  363. [ 2.208275] usb usb2: Product: Generic Platform OHCI controller
  364. [ 2.208813] usb usb2: Manufacturer: Linux 4.4.154-nuumio-sdio-defer-f806786cee ohci_hcd
  365. [ 2.209541] usb usb2: SerialNumber: fe3e0000.usb
  366. [ 2.210548] hub 2-0:1.0: USB hub found
  367. [ 2.211020] hub 2-0:1.0: 1 port detected
  368. [ 2.213820] usbcore: registered new interface driver iforce
  369. [ 2.214415] usbcore: registered new interface driver xpad
  370. [ 2.215304] usbcore: registered new interface driver usbtouchscreen
  371. [ 2.216224] .. rk pwm remotectl v1.1 init
  372. [ 2.216919] input: ff420030.pwm as /devices/platform/ff420030.pwm/input/input0
  373. [ 2.218586] i2c /dev entries driver
  374. [ 2.220002] fan53555-regulator 0-0040: GPIO lookup for consumer vsel
  375. [ 2.220014] fan53555-regulator 0-0040: using device tree for GPIO lookup
  376. [ 2.220056] of_get_named_gpiod_flags: parsed 'vsel-gpios' property of node '/i2c@ff3c0000/syr827@40[0]' - status (0)
  377. [ 2.220441] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
  378. [ 2.221099] fan53555-regulator 0-0040: Looking up vin-supply from device tree
  379. [ 2.221176] fan53555-reg: supplied by vcc_sys
  380. [ 2.221592] vcc_sys: could not add device link regulator.9 err -2
  381. [ 2.223016] vdd_cpu_b: 712 <--> 1500 mV at 1000 mV
  382. [ 2.223724] fan53555-regulator 0-0041: GPIO lookup for consumer vsel
  383. [ 2.223735] fan53555-regulator 0-0041: using device tree for GPIO lookup
  384. [ 2.223773] of_get_named_gpiod_flags: parsed 'vsel-gpios' property of node '/i2c@ff3c0000/syr828@41[0]' - status (0)
  385. [ 2.224159] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
  386. [ 2.224805] fan53555-regulator 0-0041: Looking up vin-supply from device tree
  387. [ 2.224861] fan53555-reg: supplied by vcc_sys
  388. [ 2.225274] vcc_sys: could not add device link regulator.10 err -2
  389. [ 2.226915] vdd_gpu: 712 <--> 1500 mV at 1000 mV
  390. [ 2.227982] rk808 0-001b: Pmic Chip id: 0x0
  391. [ 2.231700] rk808 0-001b: GPIO lookup for consumer dvs
  392. [ 2.231712] rk808 0-001b: using device tree for GPIO lookup
  393. [ 2.231725] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff3c0000/pmic@1b[0]'
  394. [ 2.231737] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff3c0000/pmic@1b[0]'
  395. [ 2.231747] rk808 0-001b: using lookup tables for GPIO lookup
  396. [ 2.231758] rk808 0-001b: lookup for GPIO dvs failed
  397. [ 2.231768] rk808-regulator rk808-regulator: there is no dvs0 gpio
  398. [ 2.232343] rk808 0-001b: GPIO lookup for consumer dvs
  399. [ 2.232352] rk808 0-001b: using device tree for GPIO lookup
  400. [ 2.232363] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff3c0000/pmic@1b[1]'
  401. [ 2.232375] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff3c0000/pmic@1b[1]'
  402. [ 2.232385] rk808 0-001b: using lookup tables for GPIO lookup
  403. [ 2.232394] rk808 0-001b: lookup for GPIO dvs failed
  404. [ 2.232404] rk808-regulator rk808-regulator: there is no dvs1 gpio
  405. [ 2.233019] rk808 0-001b: Looking up vcc1-supply from device tree
  406. [ 2.233095] DCDC_REG1: supplied by vcc_sys
  407. [ 2.233488] vcc_sys: could not add device link regulator.11 err -2
  408. [ 2.233962] vdd_center: 900 mV
  409. [ 2.234306] rk808 0-001b: Looking up vcc2-supply from device tree
  410. [ 2.234365] DCDC_REG2: supplied by vcc_sys
  411. [ 2.234759] vcc_sys: could not add device link regulator.12 err -2
  412. [ 2.235078] vdd_cpu_l: 750 <--> 1350 mV at 900 mV
  413. [ 2.235396] rk808 0-001b: Looking up vcc3-supply from device tree
  414. [ 2.235449] DCDC_REG3: supplied by vcc_sys
  415. [ 2.235842] vcc_sys: could not add device link regulator.13 err -2
  416. [ 2.235885] vcc_ddr: at 5000 mV
  417. [ 2.236157] rk808 0-001b: Looking up vcc4-supply from device tree
  418. [ 2.236206] DCDC_REG4: supplied by vcc_sys
  419. [ 2.236599] vcc_sys: could not add device link regulator.14 err -2
  420. [ 2.236808] vcc_1v8: 1800 mV
  421. [ 2.237108] rk808 0-001b: Looking up vcc6-supply from device tree
  422. [ 2.237158] LDO_REG1: supplied by vcc_sys
  423. [ 2.237543] vcc_sys: could not add device link regulator.15 err -2
  424. [ 2.238419] vcc1v8_dvp: 1800 mV
  425. [ 2.238725] rk808 0-001b: Looking up vcc6-supply from device tree
  426. [ 2.238775] LDO_REG2: supplied by vcc_sys
  427. [ 2.239187] vcc_sys: could not add device link regulator.16 err -2
  428. [ 2.239897] vcc3v0_touch: 3000 mV
  429. [ 2.240229] rk808 0-001b: Looking up vcc7-supply from device tree
  430. [ 2.240280] LDO_REG3: supplied by vcc_sys
  431. [ 2.240665] vcc_sys: could not add device link regulator.17 err -2
  432. [ 2.241376] vcc1v8_pmu: 1800 mV
  433. [ 2.241710] rk808 0-001b: Looking up vcc9-supply from device tree
  434. [ 2.241760] LDO_REG4: supplied by vcc_sys
  435. [ 2.242145] vcc_sys: could not add device link regulator.18 err -2
  436. [ 2.242859] vcc_sd: 1800 <--> 3300 mV at 3300 mV
  437. [ 2.243195] rk808 0-001b: Looking up vcc9-supply from device tree
  438. [ 2.243245] LDO_REG5: supplied by vcc_sys
  439. [ 2.243630] vcc_sys: could not add device link regulator.19 err -2
  440. [ 2.244341] vcca3v0_codec: 3000 mV
  441. [ 2.244675] rk808 0-001b: Looking up vcc10-supply from device tree
  442. [ 2.244725] LDO_REG6: supplied by vcc_sys
  443. [ 2.245110] vcc_sys: could not add device link regulator.20 err -2
  444. [ 2.245822] vcc_1v5: 1500 mV
  445. [ 2.246157] rk808 0-001b: Looking up vcc7-supply from device tree
  446. [ 2.246207] LDO_REG7: supplied by vcc_sys
  447. [ 2.246592] vcc_sys: could not add device link regulator.21 err -2
  448. [ 2.247308] vcca1v8_codec: 1800 mV
  449. [ 2.247626] rk808 0-001b: Looking up vcc11-supply from device tree
  450. [ 2.247676] LDO_REG8: supplied by vcc_sys
  451. [ 2.248061] vcc_sys: could not add device link regulator.22 err -2
  452. [ 2.248795] vcc_3v0: 3000 mV
  453. [ 2.249114] rk808 0-001b: Looking up vcc8-supply from device tree
  454. [ 2.249167] SWITCH_REG1: supplied by vcc3v3_sys
  455. [ 2.249599] vcc3v3_sys: could not add device link regulator.23 err -2
  456. [ 2.249664] vcc3v3_s3: at 3300 mV
  457. [ 2.249951] rk808 0-001b: Looking up vcc12-supply from device tree
  458. [ 2.250001] SWITCH_REG2: supplied by vcc3v3_sys
  459. [ 2.250435] vcc3v3_sys: could not add device link regulator.24 err -2
  460. [ 2.250597] vcc3v3_s0: at 3300 mV
  461. [ 2.254353] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
  462. [ 2.255460] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff80094da000
  463. [ 2.256970] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff80094dc000
  464. [ 2.258646] fusb302 4-0022: GPIO lookup for consumer int-n
  465. [ 2.258658] fusb302 4-0022: using device tree for GPIO lookup
  466. [ 2.258699] of_get_named_gpiod_flags: parsed 'int-n-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]' - status (0)
  467. [ 2.258731] fusb302 4-0022: GPIO lookup for consumer vbus-5v
  468. [ 2.258741] fusb302 4-0022: using device tree for GPIO lookup
  469. [ 2.258774] of_get_named_gpiod_flags: parsed 'vbus-5v-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]' - status (0)
  470. [ 2.258805] fusb302 4-0022: GPIO lookup for consumer vbus-other
  471. [ 2.258815] fusb302 4-0022: using device tree for GPIO lookup
  472. [ 2.258860] of_get_named_gpiod_flags: can't parse 'vbus-other-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]'
  473. [ 2.258871] of_get_named_gpiod_flags: can't parse 'vbus-other-gpio' property of node '/i2c@ff3d0000/fusb30x@22[0]'
  474. [ 2.258881] fusb302 4-0022: using lookup tables for GPIO lookup
  475. [ 2.258892] fusb302 4-0022: lookup for GPIO vbus-other failed
  476. [ 2.258903] fusb302 4-0022: GPIO lookup for consumer discharge
  477. [ 2.258912] fusb302 4-0022: using device tree for GPIO lookup
  478. [ 2.258923] of_get_named_gpiod_flags: can't parse 'discharge-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]'
  479. [ 2.258933] of_get_named_gpiod_flags: can't parse 'discharge-gpio' property of node '/i2c@ff3d0000/fusb30x@22[0]'
  480. [ 2.258943] fusb302 4-0022: using lookup tables for GPIO lookup
  481. [ 2.258953] fusb302 4-0022: lookup for GPIO discharge failed
  482. [ 2.259163] fusb302 4-0022: Can't get property of role, set role to default DRP
  483. [ 2.268268] fusb302 4-0022: port 0 probe success with role ROLE_MODE_DRP, try_role ROLE_MODE_NONE
  484. [ 2.269127] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff80094de000
  485. [ 2.271261] IR NEC protocol handler initialized
  486. [ 2.271697] IR RC5(x/sz) protocol handler initialized
  487. [ 2.272175] IR RC6 protocol handler initialized
  488. [ 2.272606] IR JVC protocol handler initialized
  489. [ 2.273039] IR Sony protocol handler initialized
  490. [ 2.273479] IR SANYO protocol handler initialized
  491. [ 2.273926] IR Sharp protocol handler initialized
  492. [ 2.274375] IR MCE Keyboard/mouse protocol handler initialized
  493. [ 2.274939] IR XMP protocol handler initialized
  494. [ 2.276254] usbcore: registered new interface driver uvcvideo
  495. [ 2.276785] USB Video Class driver (1.1.1)
  496. [ 2.277894] rockchip-iodomain ff320000.syscon:io-domains: Looking up pmu1830-supply from device tree
  497. [ 2.278180] rockchip-iodomain ff770000.syscon:io-domains: Looking up bt656-supply from device tree
  498. [ 2.278352] rockchip-iodomain ff770000.syscon:io-domains: Looking up audio-supply from device tree
  499. [ 2.278448] rockchip-iodomain ff770000.syscon:io-domains: Looking up sdmmc-supply from device tree
  500. [ 2.278528] rockchip-iodomain ff770000.syscon:io-domains: Looking up gpio1830-supply from device tree
  501. [ 2.281290] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
  502. [ 2.282321] rockchip-thermal ff260000.tsadc: tsadc is probed successfully!
  503. [ 2.284441] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
  504. [ 2.285238] Bluetooth: Virtual HCI driver ver 1.5
  505. [ 2.285802] Bluetooth: HCI UART driver ver 2.3
  506. [ 2.286223] Bluetooth: HCI UART protocol H4 registered
  507. [ 2.286703] Bluetooth: HCI UART protocol LL registered
  508. [ 2.287255] Bluetooth: HCI UART protocol ATH3K registered
  509. [ 2.287837] usbcore: registered new interface driver bfusb
  510. [ 2.288412] usbcore: registered new interface driver btusb
  511. [ 2.289494] cpu cpu0: Failed to get leakage
  512. [ 2.289917] cpu cpu0: Looking up cpu-supply from device tree
  513. [ 2.290021] cpu cpu0: Failed to get pvtm
  514. [ 2.290747] cpu cpu4: Failed to get leakage
  515. [ 2.291191] cpu cpu4: Looking up cpu-supply from device tree
  516. [ 2.291262] cpu cpu4: Failed to get pvtm
  517. [ 2.291935] cpu cpu0: Looking up cpu-supply from device tree
  518. [ 2.292300] cpu cpu0: Looking up cpu-supply from device tree
  519. [ 2.293880] cpu cpu4: Looking up cpu-supply from device tree
  520. [ 2.297138] sdhci: Secure Digital Host Controller Interface driver
  521. [ 2.297714] sdhci: Copyright(c) Pierre Ossman
  522. [ 2.298128] Synopsys Designware Multimedia Card Interface Driver
  523. [ 2.300825] sdhci-pltfm: SDHCI platform and OF driver helper
  524. [ 2.301942] sdhci-arasan fe330000.sdhci: GPIO lookup for consumer wp
  525. [ 2.301955] sdhci-arasan fe330000.sdhci: using device tree for GPIO lookup
  526. [ 2.301968] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/sdhci@fe330000[0]'
  527. [ 2.301980] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/sdhci@fe330000[0]'
  528. [ 2.301990] sdhci-arasan fe330000.sdhci: using lookup tables for GPIO lookup
  529. [ 2.302001] sdhci-arasan fe330000.sdhci: lookup for GPIO wp failed
  530. [ 2.303113] sdhci-arasan fe330000.sdhci: Looking up vmmc-supply from device tree
  531. [ 2.303127] sdhci-arasan fe330000.sdhci: Looking up vmmc-supply property in node /sdhci@fe330000 failed
  532. [ 2.303166] sdhci-arasan fe330000.sdhci: Looking up vqmmc-supply from device tree
  533. [ 2.303179] sdhci-arasan fe330000.sdhci: Looking up vqmmc-supply property in node /sdhci@fe330000 failed
  534. [ 2.303201] sdhci-arasan fe330000.sdhci: No vmmc regulator found
  535. [ 2.303760] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
  536. [ 2.338935] mmc0: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
  537. [ 2.340398] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/work-led[0]' - status (0)
  538. [ 2.340590] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/diy-led[0]' - status (0)
  539. [ 2.340884] hidraw: raw HID events driver (C) Jiri Kosina
  540. [ 2.346235] usbcore: registered new interface driver usbhid
  541. [ 2.346763] usbhid: USB HID core driver
  542. [ 2.352319] usbcore: registered new interface driver snd-usb-audio
  543. [ 2.353995] of_get_named_gpiod_flags: can't parse 'spk-con-gpio' property of node '/i2c@ff110000/es8316@10[0]'
  544. [ 2.354011] es8316 1-0010: Can not read property spk_ctl_gpio
  545. [ 2.354598] of_get_named_gpiod_flags: parsed 'hp-det-gpio' property of node '/i2c@ff110000/es8316@10[0]' - status (0)
  546. [ 2.362672] u32 classifier
  547. [ 2.363016] Netfilter messages via NETLINK v0.30.
  548. [ 2.363525] ip_set: protocol 6
  549. [ 2.364053] Initializing XFRM netlink socket
  550. [ 2.365183] NET: Registered protocol family 10
  551. [ 2.366766] NET: Registered protocol family 17
  552. [ 2.367411] NET: Registered protocol family 15
  553. [ 2.367877] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  554. [ 2.369038] Bridge firewalling registered
  555. [ 2.369869] Bluetooth: RFCOMM socket layer initialized
  556. [ 2.370386] Bluetooth: RFCOMM ver 1.11
  557. [ 2.370763] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  558. [ 2.371401] Bluetooth: HIDP socket layer initialized
  559. [ 2.371942] 8021q: 802.1Q VLAN Support v1.8
  560. [ 2.372372] [WLAN_RFKILL]: Enter rfkill_wlan_init
  561. [ 2.373250] [WLAN_RFKILL]: Enter rfkill_wlan_probe
  562. [ 2.373770] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6354
  563. [ 2.374402] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
  564. [ 2.375096] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
  565. [ 2.375796] of_get_named_gpiod_flags: can't parse 'WIFI,poweren_gpio' property of node '/wireless-wlan[0]'
  566. [ 2.375807] of_get_named_gpiod_flags: can't parse 'WIFI,vbat_gpio' property of node '/wireless-wlan[0]'
  567. [ 2.375817] of_get_named_gpiod_flags: can't parse 'WIFI,reset_gpio' property of node '/wireless-wlan[0]'
  568. [ 2.375874] of_get_named_gpiod_flags: parsed 'WIFI,host_wake_irq' property of node '/wireless-wlan[0]' - status (0)
  569. [ 2.375883] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 3, flags = 0.
  570. [ 2.376728] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
  571. [ 2.377415] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
  572. [ 2.377903] [WLAN_RFKILL]: Exit rfkill_wlan_probe
  573. [ 2.378431] [BT_RFKILL]: Enter rfkill_rk_init
  574. [ 2.379345] of_get_named_gpiod_flags: parsed 'uart_rts_gpios' property of node '/wireless-bluetooth[0]' - status (0)
  575. [ 2.379354] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 83.
  576. [ 2.380116] of_get_named_gpiod_flags: can't parse 'BT,power_gpio' property of node '/wireless-bluetooth[0]'
  577. [ 2.380150] of_get_named_gpiod_flags: parsed 'BT,reset_gpio' property of node '/wireless-bluetooth[0]' - status (0)
  578. [ 2.380158] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 9.
  579. [ 2.380923] of_get_named_gpiod_flags: parsed 'BT,wake_gpio' property of node '/wireless-bluetooth[0]' - status (0)
  580. [ 2.380931] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 91.
  581. [ 2.381696] of_get_named_gpiod_flags: parsed 'BT,wake_host_irq' property of node '/wireless-bluetooth[0]' - status (0)
  582. [ 2.381704] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 4.
  583. [ 2.383228] [BT_RFKILL]: Request irq for bt wakeup host
  584. [ 2.383804] [BT_RFKILL]: ** disable irq
  585. [ 2.384357] [BT_RFKILL]: bt_default device registered.
  586. [ 2.384957] Key type dns_resolver registered
  587. [ 2.386258] Registered cp15_barrier emulation handler
  588. [ 2.386859] Registered setend emulation handler
  589. [ 2.388118] registered taskstats version 1
  590. [ 2.393168] Btrfs loaded, integrity-checker=on
  591. [ 2.393674] BTRFS: selftest: Running btrfs free space cache tests
  592. [ 2.394266] BTRFS: selftest: Running extent only tests
  593. [ 2.394762] BTRFS: selftest: Running bitmap only tests
  594. [ 2.395312] BTRFS: selftest: Running bitmap and extent tests
  595. [ 2.395874] BTRFS: selftest: Running space stealing from bitmap to extent
  596. [ 2.397745] BTRFS: selftest: Free space cache tests finished
  597. [ 2.398263] BTRFS: selftest: Running extent buffer operation tests
  598. [ 2.398798] BTRFS: selftest: Running btrfs_split_item tests
  599. [ 2.399398] BTRFS: selftest: Running find delalloc tests
  600. [ 2.644474] BTRFS: selftest: Running btrfs_get_extent tests
  601. [ 2.645122] BTRFS: selftest: Running hole first btrfs_get_extent test
  602. [ 2.645714] BTRFS: selftest: Running outstanding_extents tests
  603. [ 2.646266] BTRFS: selftest: Running qgroup tests
  604. [ 2.646688] BTRFS: selftest: Qgroup basic add
  605. [ 2.647127] BTRFS: selftest: Qgroup multiple refs test
  606. [ 2.699635] Key type encrypted registered
  607. [ 2.702274] phy phy-ff770000.syscon:usb2-phy@e450.5: Looking up phy-supply from device tree
  608. [ 2.702406] vcc5v0_host: could not add device link phy-ff770000.syscon:usb2-phy@e450.5 err -2
  609. [ 2.703128] phy phy-ff770000.syscon:usb2-phy@e450.6: Looking up phy-supply from device tree
  610. [ 2.703152] phy phy-ff770000.syscon:usb2-phy@e450.6: Looking up phy-supply property in node /syscon@ff770000/usb2-phy@e450/otg-port failed
  611. [ 2.703593] phy phy-ff770000.syscon:usb2-phy@e450.6: Looking up vbus-supply from device tree
  612. [ 2.703616] phy phy-ff770000.syscon:usb2-phy@e450.6: Looking up vbus-supply property in node /syscon@ff770000/usb2-phy@e450/otg-port failed
  613. [ 2.703654] phy phy-ff770000.syscon:usb2-phy@e450.6: Failed to get VBUS supply regulator
  614. [ 2.705799] phy phy-ff7c0000.phy.7: Looking up phy-supply from device tree
  615. [ 2.705821] phy phy-ff7c0000.phy.7: Looking up phy-supply property in node /phy@ff7c0000/dp-port failed
  616. [ 2.706037] phy phy-ff7c0000.phy.8: Looking up phy-supply from device tree
  617. [ 2.706055] phy phy-ff7c0000.phy.8: Looking up phy-supply property in node /phy@ff7c0000/usb3-port failed
  618. [ 2.708077] rockchip-drm display-subsystem: devfreq is not set
  619. [ 2.709171] rockchip-vop ff900000.vop: missing rockchip,grf property
  620. [ 2.710265] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8008d31f38)
  621. [ 2.711228] rockchip-vop ff8f0000.vop: missing rockchip,grf property
  622. [ 2.712200] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff8008d31f38)
  623. [ 2.714165] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports
  624. [ 2.714967] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
  625. [ 2.716138] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
  626. [ 2.719744] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xffffff8008d27f40)
  627. [ 2.721760] i2c i2c-10: of_i2c: modalias failure on /dp@fec00000/ports
  628. [ 2.723285] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
  629. [ 2.724206] rockchip-drm display-subsystem: bound fec00000.dp (ops 0xffffff8008d28f18)
  630. [ 2.725005] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  631. [ 2.725646] [drm] No driver support for vblank timestamp query.
  632. [ 2.726641] rockchip-drm display-subsystem: failed to parse loader memory
  633. [ 2.727524] rockchip-drm display-subsystem: No connectors reported connected with modes
  634. [ 2.728441] [drm] Cannot find any crtc or sizes - going 1024x768
  635. [ 2.758082] Console: switching to colour frame buffer device 128x48
  636. [ 2.773612] rockchip-drm display-subsystem: fb0: frame buffer device
  637. [ 2.789083] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
  638. [ 2.790000] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 3
  639. [ 2.791084] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
  640. [ 2.792152] xhci-hcd xhci-hcd.5.auto: irq 224, io mem 0xfe800000
  641. [ 2.793048] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  642. [ 2.793846] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  643. [ 2.794689] usb usb3: Product: xHCI Host Controller
  644. [ 2.795352] usb usb3: Manufacturer: Linux 4.4.154-nuumio-sdio-defer-f806786cee xhci-hcd
  645. [ 2.796285] usb usb3: SerialNumber: xhci-hcd.5.auto
  646. [ 2.797432] hub 3-0:1.0: USB hub found
  647. [ 2.797911] hub 3-0:1.0: 1 port detected
  648. [ 2.798742] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
  649. [ 2.799581] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 4
  650. [ 2.800552] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  651. [ 2.801623] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
  652. [ 2.802420] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  653. [ 2.803331] usb usb4: Product: xHCI Host Controller
  654. [ 2.803908] usb usb4: Manufacturer: Linux 4.4.154-nuumio-sdio-defer-f806786cee xhci-hcd
  655. [ 2.804840] usb usb4: SerialNumber: xhci-hcd.5.auto
  656. [ 2.805984] hub 4-0:1.0: USB hub found
  657. [ 2.806464] hub 4-0:1.0: 1 port detected
  658. [ 2.808641] xhci-hcd xhci-hcd.5.auto: remove, state 1
  659. [ 2.816333] usb usb4: USB disconnect, device number 1
  660. [ 2.847841] xhci-hcd xhci-hcd.5.auto: Host not halted after 16000 microseconds.
  661. [ 2.855565] xhci-hcd xhci-hcd.5.auto: Host controller not halted, aborting reset.
  662. [ 2.863335] xhci-hcd xhci-hcd.5.auto: USB bus 4 deregistered
  663. [ 2.869599] xhci-hcd xhci-hcd.5.auto: remove, state 1
  664. [ 2.875617] usb usb3: USB disconnect, device number 1
  665. [ 2.882010] xhci-hcd xhci-hcd.5.auto: USB bus 3 deregistered
  666. [ 2.892976] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller
  667. [ 2.898214] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 3
  668. [ 2.903561] xhci-hcd xhci-hcd.6.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
  669. [ 2.908880] xhci-hcd xhci-hcd.6.auto: irq 225, io mem 0xfe900000
  670. [ 2.913956] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  671. [ 2.918997] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  672. [ 2.924012] usb usb3: Product: xHCI Host Controller
  673. [ 2.928773] usb usb3: Manufacturer: Linux 4.4.154-nuumio-sdio-defer-f806786cee xhci-hcd
  674. [ 2.933853] usb usb3: SerialNumber: xhci-hcd.6.auto
  675. [ 2.939104] hub 3-0:1.0: USB hub found
  676. [ 2.943687] hub 3-0:1.0: 1 port detected
  677. [ 2.949221] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller
  678. [ 2.955695] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 4
  679. [ 2.960339] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  680. [ 2.966883] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
  681. [ 2.972993] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  682. [ 2.979137] usb usb4: Product: xHCI Host Controller
  683. [ 2.983261] usb usb4: Manufacturer: Linux 4.4.154-nuumio-sdio-defer-f806786cee xhci-hcd
  684. [ 2.987711] usb usb4: SerialNumber: xhci-hcd.6.auto
  685. [ 2.992691] hub 4-0:1.0: USB hub found
  686. [ 2.996693] hub 4-0:1.0: 1 port detected
  687. [ 3.014996] ehci-platform fe380000.usb: EHCI Host Controller
  688. [ 3.028100] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 5
  689. [ 3.041256] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000
  690. [ 3.063158] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
  691. [ 3.068836] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
  692. [ 3.074273] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  693. [ 3.079714] usb usb5: Product: EHCI Host Controller
  694. [ 3.084943] usb usb5: Manufacturer: Linux 4.4.154-nuumio-sdio-defer-f806786cee ehci_hcd
  695. [ 3.090608] usb usb5: SerialNumber: fe380000.usb
  696. [ 3.096538] hub 5-0:1.0: USB hub found
  697. [ 3.101835] hub 5-0:1.0: 1 port detected
  698. [ 3.107099] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
  699. [ 3.111927] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 6
  700. [ 3.116830] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000
  701. [ 3.179463] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
  702. [ 3.192002] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  703. [ 3.204521] usb usb6: Product: Generic Platform OHCI controller
  704. [ 3.216876] usb usb6: Manufacturer: Linux 4.4.154-nuumio-sdio-defer-f806786cee ohci_hcd
  705. [ 3.229806] usb usb6: SerialNumber: fe3a0000.usb
  706. [ 3.244052] hub 6-0:1.0: USB hub found
  707. [ 3.249373] hub 6-0:1.0: 1 port detected
  708. [ 3.255829] dwmmc_rockchip fe310000.dwmmc: no longer waiting for pcie port init
  709. [ 3.258970] usb 3-1: new high-speed USB device number 2 using xhci-hcd
  710. [ 3.267209] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
  711. [ 3.272926] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
  712. [ 3.278544] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
  713. [ 3.284067] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
  714. [ 3.290066] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.
  715. [ 3.295953] dwmmc_rockchip fe310000.dwmmc: Looking up vmmc-supply from device tree
  716. [ 3.295965] dwmmc_rockchip fe310000.dwmmc: Looking up vmmc-supply property in node /dwmmc@fe310000 failed
  717. [ 3.296002] dwmmc_rockchip fe310000.dwmmc: Looking up vqmmc-supply from device tree
  718. [ 3.296012] dwmmc_rockchip fe310000.dwmmc: Looking up vqmmc-supply property in node /dwmmc@fe310000 failed
  719. [ 3.296030] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
  720. [ 3.300813] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
  721. [ 3.305590] dwmmc_rockchip fe310000.dwmmc: GPIO lookup for consumer wp
  722. [ 3.305598] dwmmc_rockchip fe310000.dwmmc: using device tree for GPIO lookup
  723. [ 3.305609] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@fe310000[0]'
  724. [ 3.305616] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@fe310000[0]'
  725. [ 3.305623] dwmmc_rockchip fe310000.dwmmc: using lookup tables for GPIO lookup
  726. [ 3.305631] dwmmc_rockchip fe310000.dwmmc: lookup for GPIO wp failed
  727. [ 3.305870] platform sdio-pwrseq: GPIO lookup for consumer reset
  728. [ 3.305877] platform sdio-pwrseq: using device tree for GPIO lookup
  729. [ 3.305902] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/sdio-pwrseq[0]' - status (0)
  730. [ 3.305944] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
  731. [ 3.323232] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  732. [ 3.343252] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized
  733. [ 3.351430] dwmmc_rockchip fe320000.dwmmc: no longer waiting for pcie port init
  734. [ 3.355902] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
  735. [ 3.368939] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
  736. [ 3.381864] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
  737. [ 3.394799] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
  738. [ 3.408336] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
  739. [ 3.421703] dwmmc_rockchip fe320000.dwmmc: Looking up vmmc-supply from device tree
  740. [ 3.421733] dwmmc_rockchip fe320000.dwmmc: Looking up vmmc-supply property in node /dwmmc@fe320000 failed
  741. [ 3.421803] dwmmc_rockchip fe320000.dwmmc: Looking up vqmmc-supply from device tree
  742. [ 3.423985] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
  743. [ 3.429652] dwmmc_rockchip fe320000.dwmmc: GPIO lookup for consumer cd
  744. [ 3.429661] dwmmc_rockchip fe320000.dwmmc: using device tree for GPIO lookup
  745. [ 3.429674] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/dwmmc@fe320000[0]'
  746. [ 3.429684] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/dwmmc@fe320000[0]'
  747. [ 3.429692] dwmmc_rockchip fe320000.dwmmc: using lookup tables for GPIO lookup
  748. [ 3.429701] dwmmc_rockchip fe320000.dwmmc: lookup for GPIO cd failed
  749. [ 3.429713] dwmmc_rockchip fe320000.dwmmc: GPIO lookup for consumer wp
  750. [ 3.429720] dwmmc_rockchip fe320000.dwmmc: using device tree for GPIO lookup
  751. [ 3.429729] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@fe320000[0]'
  752. [ 3.429738] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@fe320000[0]'
  753. [ 3.429746] dwmmc_rockchip fe320000.dwmmc: using lookup tables for GPIO lookup
  754. [ 3.429773] dwmmc_rockchip fe320000.dwmmc: lookup for GPIO wp failed
  755. [ 3.430032] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
  756. [ 3.430037] usb 3-1: New USB device found, idVendor=2109, idProduct=2813
  757. [ 3.430044] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  758. [ 3.430049] usb 3-1: Product: USB2.0 Hub
  759. [ 3.430054] usb 3-1: Manufacturer: VIA Labs, Inc.
  760. [ 3.439069] mmc_host mmc1: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
  761. [ 3.447244] hub 3-1:1.0: USB hub found
  762. [ 3.452385] hub 3-1:1.0: 4 ports detected
  763. [ 3.474399] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
  764. [ 3.494981] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  765. [ 3.506980] mmc_host mmc1: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
  766. [ 3.516210] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
  767. [ 3.532844] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/es8316-sound[0]'
  768. [ 3.532857] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/es8316-sound[0]'
  769. [ 3.552976] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
  770. [ 3.559335] vcc_sd: ramp_delay not set
  771. [ 3.559366] rockchip-iodomain ff770000.syscon:io-domains: Setting to 1800000 done
  772. [ 3.580569] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd
  773. [ 3.589334] mmc_host mmc2: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
  774. [ 3.626918] usb 6-1: new low-speed USB device number 2 using ohci-platform
  775. [ 3.662446] asoc-simple-card es8316-sound: ES8316 HiFi <-> ff890000.i2s mapping ok
  776. [ 3.676725] asoc-simple-card es8316-sound: ASoC: no source widget found for MICBIAS1
  777. [ 3.690871] asoc-simple-card es8316-sound: ASoC: Failed to add route MICBIAS1 -> direct -> Mic Jack
  778. [ 3.705242] asoc-simple-card es8316-sound: ASoC: no sink widget found for IN1P
  779. [ 3.709727] usb 4-1: New USB device found, idVendor=2109, idProduct=0813
  780. [ 3.709733] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  781. [ 3.709738] usb 4-1: Product: USB3.0 Hub
  782. [ 3.709743] usb 4-1: Manufacturer: VIA Labs, Inc.
  783. [ 3.712827] hub 4-1:1.0: USB hub found
  784. [ 3.713119] hub 4-1:1.0: 4 ports detected
  785. [ 3.726958] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
  786. [ 3.753132] asoc-simple-card es8316-sound: ASoC: Failed to add route Mic Jack -> direct -> IN1P
  787. [ 3.759284] es8316 1-0010: ASoC: Failed to create Left Hp mixer debugfs file
  788. [ 3.764489] es8316 1-0010: ASoC: Failed to create Right Hp mixer debugfs file
  789. [ 3.769702] es8316 1-0010: ASoC: Failed to create HPCP L debugfs file
  790. [ 3.774578] es8316 1-0010: ASoC: Failed to create HPCP R debugfs file
  791. [ 3.779002] es8316 1-0010: ASoC: Failed to create HPVOL L debugfs file
  792. [ 3.783361] es8316 1-0010: ASoC: Failed to create HPVOL R debugfs file
  793. [ 3.791699] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/spdif-sound[0]'
  794. [ 3.791708] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/spdif-sound[0]'
  795. [ 3.791931] rockchip-spdif ff870000.spdif: Missing dma channel for stream: 0
  796. [ 3.796268] rockchip-spdif ff870000.spdif: ASoC: pcm constructor failed: -22
  797. [ 3.800567] asoc-simple-card spdif-sound: ASoC: can't create pcm ff870000.spdif-dit-hifi :-22
  798. [ 3.805086] asoc-simple-card spdif-sound: ASoC: failed to instantiate card -22
  799. [ 3.809570] asoc-simple-card: probe of spdif-sound failed with error -22
  800. [ 3.816958] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 08:50:11 UTC (1358499011)
  801. [ 3.821467] of_cfs_init
  802. [ 3.825398] of_cfs_init: OK
  803. [ 3.842948] usb 3-1.1: new high-speed USB device number 3 using xhci-hcd
  804. [ 3.846481] vcc3v3_pcie: disabling
  805. [ 3.847288] rk-keypad rockchip-key: no io-channels defined
  806. [ 3.847393] of_get_named_gpiod_flags: parsed 'gpios' property of node '/rockchip-key/power-key[0]' - status (0)
  807. [ 3.847410] of_get_named_gpiod_flags: parsed 'gpios' property of node '/rockchip-key/power-key[0]' - status (0)
  808. [ 3.847559] input: rk29-keypad as /devices/platform/rockchip-key/input/input1
  809. [ 3.848595] ALSA device list:
  810. [ 3.848597] #0: rockchip,es8316-codec
  811. [ 3.868143] ttyS2 - failed to request DMA, use interrupt mode
  812. [ 3.872867] Freeing unused kernel memory: 1216K
  813. [ 3.882930] dwmmc_rockchip fe320000.dwmmc: Successfully tuned phase to 232
  814. [ 3.887322] mmc2: new ultra high speed SDR104 SDHC card at address 59b4
  815. [ 3.892382] mmcblk2: mmc2:59b4 SD 7.23 GiB
  816. [ 3.904636] mmcblk2: p1 p2 p3 p4 p5 p6 p7
  817. [ 3.918153] usb 6-1: New USB device found, idVendor=2516, idProduct=0042
  818. [ 3.922483] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  819. [ 3.926746] usb 6-1: Product: MasterKeys Lite L Combo Keyboard(KB)
  820. [ 3.930984] usb 6-1: Manufacturer: Cooler Master Technology Inc.
  821. [ 3.943024] input: Cooler Master Technology Inc. MasterKeys Lite L Combo Keyboard(KB) as /devices/platform/fe3a0000.usb/usb6/6-1/6-1:1.0/0003:2516:0042.0001/input/input2
  822. [ 3.980206] usb 3-1.1: New USB device found, idVendor=2109, idProduct=2813
  823. [ 3.985385] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  824. [ 3.990505] usb 3-1.1: Product: USB2.0 Hub
  825. [ 3.995232] usb 3-1.1: Manufacturer: VIA Labs, Inc.
  826. [ 4.012327] hid-generic 0003:2516:0042.0001: input,hidraw0: USB HID v1.10 Keyboard [Cooler Master Technology Inc. MasterKeys Lite L Combo Keyboard(KB)] on usb-fe3a0000.usb-1/input0
  827. [ 4.025172] hub 3-1.1:1.0: USB hub found
  828. [ 4.031148] hub 3-1.1:1.0: 4 ports detected
  829. [ 4.046915] input: Cooler Master Technology Inc. MasterKeys Lite L Combo Keyboard(KB) as /devices/platform/fe3a0000.usb/usb6/6-1/6-1:1.1/0003:2516:0042.0002/input/input3
  830. [ 4.116100] hid-generic 0003:2516:0042.0002: input,hiddev0,hidraw1: USB HID v1.10 Keyboard [Cooler Master Technology Inc. MasterKeys Lite L Combo Keyboard(KB)] on usb-fe3a0000.usb-1/input1
  831. [ 4.128532] usb 4-1.1: new SuperSpeed USB device number 3 using xhci-hcd
  832. [ 4.202806] rk-hdmi-dp-sound hdmi-dp-sound: control 3:0:0:ELD:0 is already present
  833. [ 4.208157] mali ff9a0000.gpu: Looking up mali-supply from device tree
  834. [ 4.208268] mali ff9a0000.gpu: Failed to get leakage
  835. [ 4.208277] mali ff9a0000.gpu: Looking up mali-supply from device tree
  836. [ 4.208289] vdd_gpu: could not add device link ff9a0000.gpu err -17
  837. [ 4.208293] vdd_gpu: Failed to create debugfs directory
  838. [ 4.208298] mali ff9a0000.gpu: Failed to get pvtm
  839. [ 4.208967] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
  840. [ 4.209200] mali ff9a0000.gpu: Protected mode not available
  841. [ 4.209854] mali ff9a0000.gpu: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
  842. [ 4.209930] I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; [Line] : 414; [Func] : kbase_devfreq_init(); success initing power_model_simple.
  843. [ 4.214276] mali ff9a0000.gpu: Probed as mali0
  844. [ 4.216408] phy phy-pcie-phy.9: Looking up phy-supply from device tree
  845. [ 4.216420] phy phy-pcie-phy.9: Looking up phy-supply property in node /pcie-phy failed
  846. [ 4.227923] usb 4-1.1: New USB device found, idVendor=2109, idProduct=0813
  847. [ 4.227931] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  848. [ 4.227938] usb 4-1.1: Product: USB3.0 Hub
  849. [ 4.227943] usb 4-1.1: Manufacturer: VIA Labs, Inc.
  850. [ 4.241177] hub 4-1.1:1.0: USB hub found
  851. [ 4.241322] hub 4-1.1:1.0: 4 ports detected
  852. [ 4.306699] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: Failed to add ELD: -16
  853. [ 4.312285] rk-hdmi-dp-sound hdmi-dp-sound: multicodec <-> ff8a0000.i2s mapping ok
  854. [ 4.317525] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: Failed to create Playback debugfs file
  855. [ 4.324932] rockchip-pcie f8000000.pcie: GPIO lookup for consumer ep
  856. [ 4.324944] rockchip-pcie f8000000.pcie: using device tree for GPIO lookup
  857. [ 4.324982] of_get_named_gpiod_flags: parsed 'ep-gpios' property of node '/pcie@f8000000[0]' - status (0)
  858. [ 4.325224] rockchip-pcie f8000000.pcie: Looking up vpcie3v3-supply from device tree
  859. [ 4.325368] rockchip-pcie f8000000.pcie: Looking up vpcie1v8-supply from device tree
  860. [ 4.325377] rockchip-pcie f8000000.pcie: Looking up vpcie1v8-supply property in node /pcie@f8000000 failed
  861. [ 4.325406] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
  862. [ 4.330658] rockchip-pcie f8000000.pcie: Looking up vpcie0v9-supply from device tree
  863. [ 4.330693] rockchip-pcie f8000000.pcie: Looking up vpcie0v9-supply property in node /pcie@f8000000 failed
  864. [ 4.330745] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
  865. [ 4.340409] rockchip-pcie f8000000.pcie: invalid power supply
  866. [ 4.362943] PCI host bridge /pcie@f8000000 ranges:
  867. [ 4.369789] MEM 0xfa000000..0xfbdfffff -> 0xfa000000
  868. [ 4.376463] IO 0xfbe00000..0xfbefffff -> 0xfbe00000
  869. [ 4.383581] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
  870. [ 4.389476] pci_bus 0000:00: root bus resource [bus 00-1f]
  871. [ 4.395488] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
  872. [ 4.401411] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff])
  873. [ 4.408113] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400
  874. [ 4.408240] pci 0000:00:00.0: supports D1
  875. [ 4.408253] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  876. [ 4.408703] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  877. [ 4.416612] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-1f] (conflicts with (null) [bus 00-1f])
  878. [ 4.416673] pci 0000:01:00.0: [1b4b:9215] type 00 class 0x010601
  879. [ 4.416743] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00008000 invalid
  880. [ 4.424194] pci 0000:01:00.0: reg 0x10: [io size 0x0008]
  881. [ 4.424227] pci 0000:01:00.0: reg 0x14: initial BAR value 0x00008040 invalid
  882. [ 4.431578] pci 0000:01:00.0: reg 0x14: [io size 0x0004]
  883. [ 4.431609] pci 0000:01:00.0: reg 0x18: initial BAR value 0x00008100 invalid
  884. [ 4.438852] pci 0000:01:00.0: reg 0x18: [io size 0x0008]
  885. [ 4.438881] pci 0000:01:00.0: reg 0x1c: initial BAR value 0x00008140 invalid
  886. [ 4.445904] pci 0000:01:00.0: reg 0x1c: [io size 0x0004]
  887. [ 4.445934] pci 0000:01:00.0: reg 0x20: [io 0x800000-0x80001f]
  888. [ 4.445963] pci 0000:01:00.0: reg 0x24: [mem 0x00900000-0x009007ff]
  889. [ 4.445992] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0003ffff pref]
  890. [ 4.449845] pci 0000:01:00.0: PME# supported from D3hot
  891. [ 4.459029] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  892. [ 4.459113] pci 0000:00:00.0: BAR 8: assigned [mem 0xfa000000-0xfa0fffff]
  893. [ 4.474051] pci 0000:01:00.0: BAR 6: assigned [mem 0xfa000000-0xfa03ffff pref]
  894. [ 4.486999] dwmmc_rockchip fe320000.dwmmc: Unexpected interrupt latency
  895. [ 4.503196] pci 0000:01:00.0: BAR 5: assigned [mem 0xfa040000-0xfa0407ff]
  896. [ 4.517860] pci 0000:01:00.0: BAR 4: no space for [io size 0x0020]
  897. [ 4.532445] pci 0000:01:00.0: BAR 4: failed to assign [io size 0x0020]
  898. [ 4.546754] pci 0000:01:00.0: BAR 0: no space for [io size 0x0008]
  899. [ 4.560762] pci 0000:01:00.0: BAR 0: failed to assign [io size 0x0008]
  900. [ 4.574588] pci 0000:01:00.0: BAR 2: no space for [io size 0x0008]
  901. [ 4.587006] dwmmc_rockchip fe320000.dwmmc: Unexpected interrupt latency
  902. [ 4.602103] pci 0000:01:00.0: BAR 2: failed to assign [io size 0x0008]
  903. [ 4.615084] dwmmc_rockchip fe320000.dwmmc: Unexpected interrupt latency
  904. [ 4.628707] pci 0000:01:00.0: BAR 1: no space for [io size 0x0004]
  905. [ 4.641536] pci 0000:01:00.0: BAR 1: failed to assign [io size 0x0004]
  906. [ 4.654271] pci 0000:01:00.0: BAR 3: no space for [io size 0x0004]
  907. [ 4.666790] pci 0000:01:00.0: BAR 3: failed to assign [io size 0x0004]
  908. [ 4.679193] pci 0000:00:00.0: PCI bridge to [bus 01]
  909. [ 4.691511] pci 0000:00:00.0: bridge window [mem 0xfa000000-0xfa0fffff]
  910. [ 4.697164] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
  911. [ 4.697721] EXT4-fs (mmcblk2p7): mounted filesystem with writeback data mode. Opts: (null)
  912. [ 4.708656] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
  913. [ 4.714209] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
  914. [ 4.719527] pcie_pme 0000:00:00.0:pcie01: service driver pcie_pme loaded
  915. [ 4.719881] aer 0000:00:00.0:pcie02: service driver aer loaded
  916. [ 4.720033] ahci 0000:01:00.0: version 3.0
  917. [ 4.738999] ahci 0000:01:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode
  918. [ 4.743790] ahci 0000:01:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
  919. [ 4.751728] scsi host0: ahci
  920. [ 4.758977] scsi host1: ahci
  921. [ 4.765425] scsi host2: ahci
  922. [ 4.774251] scsi host3: ahci
  923. [ 4.782474] ata1: SATA max UDMA/133 abar m2048@0xfa040000 port 0xfa040100 irq 240
  924. [ 4.791052] ata2: SATA max UDMA/133 abar m2048@0xfa040000 port 0xfa040180 irq 240
  925. [ 4.799432] ata3: SATA max UDMA/133 abar m2048@0xfa040000 port 0xfa040200 irq 240
  926. [ 4.807611] ata4: SATA max UDMA/133 abar m2048@0xfa040000 port 0xfa040280 irq 240
  927. [ 5.131077] ata3: SATA link down (SStatus 0 SControl 300)
  928. [ 5.142207] ata2: SATA link down (SStatus 0 SControl 300)
  929. [ 5.147453] ata4: SATA link down (SStatus 0 SControl 300)
  930. [ 5.168185] systemd[1]: System time before build time, advancing clock.
  931. [ 5.234956] ip_tables: (C) 2000-2006 Netfilter Core Team
  932. [ 5.241597] cgroup: cgroup2: unknown option "nsdelegate"
  933. [ 5.260973] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
  934. [ 5.272663] systemd[1]: Detected architecture arm64.
  935. [ 5.295978] systemd[1]: Set hostname to <rockpro64>.
  936. [ 5.326981] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  937. [ 5.332621] ata1.00: supports DRM functions and may not be fully accessible
  938. [ 5.338578] ata1.00: ATA-11: Samsung SSD 860 EVO 500GB, RVT02B6Q, max UDMA/133
  939. [ 5.344057] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
  940. [ 5.350692] ata1.00: supports DRM functions and may not be fully accessible
  941. [ 5.357183] ata1.00: configured for UDMA/133
  942. [ 5.363252] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 860 2B6Q PQ: 0 ANSI: 5
  943. [ 5.369250] ata1.00: Enabling discard_zeroes_data
  944. [ 5.374191] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
  945. [ 5.379596] sd 0:0:0:0: [sda] Write Protect is off
  946. [ 5.384341] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  947. [ 5.384530] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  948. [ 5.384993] ata1.00: Enabling discard_zeroes_data
  949. [ 5.389396] sda: sda1
  950. [ 5.393821] ata1.00: Enabling discard_zeroes_data
  951. [ 5.394073] sd 0:0:0:0: [sda] Attached SCSI removable disk
  952. [ 5.605774] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
  953. [ 5.615246] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
  954. [ 5.749067] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn
  955. [ 5.921052] random: systemd: uninitialized urandom read (16 bytes read, 92 bits of entropy available)
  956. [ 5.937274] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  957. [ 5.955172] random: systemd: uninitialized urandom read (16 bytes read, 92 bits of entropy available)
  958. [ 5.966213] systemd[1]: Reached target Swap.
  959. [ 5.983008] random: systemd: uninitialized urandom read (16 bytes read, 92 bits of entropy available)
  960. [ 5.990658] systemd[1]: Created slice User and Session Slice.
  961. [ 6.003039] random: systemd: uninitialized urandom read (16 bytes read, 92 bits of entropy available)
  962. [ 6.010086] systemd[1]: Reached target System Time Synchronized.
  963. [ 6.023093] random: systemd: uninitialized urandom read (16 bytes read, 92 bits of entropy available)
  964. [ 6.030805] systemd[1]: Created slice System Slice.
  965. [ 6.043124] random: systemd: uninitialized urandom read (16 bytes read, 93 bits of entropy available)
  966. [ 6.050730] systemd[1]: Listening on udev Control Socket.
  967. [ 6.063322] random: systemd: uninitialized urandom read (16 bytes read, 93 bits of entropy available)
  968. [ 6.071307] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  969. [ 6.087129] random: systemd: uninitialized urandom read (16 bytes read, 93 bits of entropy available)
  970. [ 6.095731] systemd[1]: Created slice system-serial\x2dgetty.slice.
  971. [ 6.111698] random: systemd: uninitialized urandom read (16 bytes read, 93 bits of entropy available)
  972. [ 6.120118] systemd[1]: Listening on Journal Audit Socket.
  973. [ 6.135377] random: systemd: uninitialized urandom read (16 bytes read, 93 bits of entropy available)
  974. [ 6.145817] systemd[1]: Listening on udev Kernel Socket.
  975. [ 6.163525] systemd[1]: Started ntp-systemd-netif.path.
  976. [ 6.179709] systemd[1]: Listening on Syslog Socket.
  977. [ 6.195469] systemd[1]: Reached target Remote File Systems.
  978. [ 6.211639] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  979. [ 6.227795] systemd[1]: Listening on Journal Socket (/dev/log).
  980. [ 6.243429] systemd[1]: Reached target Slices.
  981. [ 6.259667] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  982. [ 6.275080] systemd[1]: Reached target Local Encrypted Volumes.
  983. [ 6.291874] systemd[1]: Listening on Journal Socket.
  984. [ 6.310583] systemd[1]: Mounting Kernel Debug File System...
  985. [ 6.337178] systemd[1]: Starting Remount Root and Kernel File Systems...
  986. [ 6.351508] systemd[1]: Starting Nameserver information manager...
  987. [ 6.376989] systemd[1]: Starting Load Kernel Modules...
  988. [ 6.399636] systemd[1]: Mounting POSIX Message Queue File System...
  989. [ 6.423533] systemd[1]: Starting Set the console keyboard layout...
  990. [ 6.447759] systemd[1]: Starting udev Coldplug all Devices...
  991. [ 6.464531] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  992. [ 6.487381] systemd[1]: Starting Restore / save the current clock...
  993. [ 6.509933] systemd[1]: Starting Journal Service...
  994. [ 6.526402] systemd[1]: Mounting Huge Pages File System...
  995. [ 6.546016] systemd[1]: Mounted Kernel Debug File System.
  996. [ 6.564561] systemd[1]: Started Remount Root and Kernel File Systems.
  997. [ 6.576007] systemd[1]: Started Load Kernel Modules.
  998. [ 6.583703] systemd[1]: Mounted POSIX Message Queue File System.
  999. [ 6.597792] systemd[1]: Started Create list of required static device nodes for the current kernel.
  1000. [ 6.612365] systemd[1]: Started Restore / save the current clock.
  1001. [ 6.628416] systemd[1]: Started Set the console keyboard layout.
  1002. [ 6.643612] systemd[1]: Mounted Huge Pages File System.
  1003. [ 6.651003] systemd[1]: Started Nameserver information manager.
  1004. [ 6.667173] systemd[1]: Reached target Network (Pre).
  1005. [ 6.685592] systemd[1]: Starting Create Static Device Nodes in /dev...
  1006. [ 6.699525] systemd[1]: Mounting FUSE Control File System...
  1007. [ 6.716999] systemd[1]: Mounting Kernel Configuration File System...
  1008. [ 6.732662] systemd[1]: Starting Apply Kernel Variables...
  1009. [ 6.742711] systemd[1]: Starting Load/Save Random Seed...
  1010. [ 6.752140] systemd[1]: Started Journal Service.
  1011. [ 6.870731] systemd-journald[314]: Received request to flush runtime journal from PID 1
  1012. [ 6.881228] systemd-journald[314]: File /var/log/journal/3d943ae181ef4768abd501353dc381db/system.journal corrupted or uncleanly shut down, renaming and replacing.
  1013. [ 7.304009] random: nonblocking pool is initialized
  1014. [ 7.653153] rockchip-saradc ff100000.saradc: Looking up vref-supply from device tree
  1015. [ 7.653162] rockchip-saradc ff100000.saradc: Looking up vref-supply property in node /saradc@ff100000 failed
  1016. [ 7.653181] ff100000.saradc supply vref not found, using dummy regulator
  1017. [ 7.860642] [BT_RFKILL]: bt shut off power
  1018. [ 7.887352] FAT-fs (mmcblk2p6): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
  1019. [ 7.942668] FAT-fs (mmcblk2p6): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  1020. [ 8.766758] zram: Added device: zram0
  1021. [ 8.773375] zram: Added device: zram1
  1022. [ 8.774494] zram: Added device: zram2
  1023. [ 8.776956] zram: Added device: zram3
  1024. [ 8.777934] zram: Added device: zram4
  1025. [ 8.779730] zram: Added device: zram5
  1026. [ 8.833808] zram0: detected capacity change from 0 to 338673664
  1027. [ 8.880419] Adding 330732k swap on /dev/zram0. Priority:5 extents:1 across:330732k SS
  1028. [ 8.881753] zram1: detected capacity change from 0 to 338673664
  1029. [ 8.896911] Adding 330732k swap on /dev/zram1. Priority:5 extents:1 across:330732k SS
  1030. [ 8.898159] zram2: detected capacity change from 0 to 338673664
  1031. [ 8.909103] Adding 330732k swap on /dev/zram2. Priority:5 extents:1 across:330732k SS
  1032. [ 8.910155] zram3: detected capacity change from 0 to 338673664
  1033. [ 8.922978] Adding 330732k swap on /dev/zram3. Priority:5 extents:1 across:330732k SS
  1034. [ 8.924167] zram4: detected capacity change from 0 to 338673664
  1035. [ 8.936512] Adding 330732k swap on /dev/zram4. Priority:5 extents:1 across:330732k SS
  1036. [ 8.937726] zram5: detected capacity change from 0 to 338673664
  1037. [ 8.950999] Adding 330732k swap on /dev/zram5. Priority:5 extents:1 across:330732k SS
  1038. [ 9.775347] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!