Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- elonaj@sklave /usr/src/linux-2.6.37-gentoo-r4 $ dmesg
- e window [io 0x0000-0x0cf7]
- pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
- pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
- pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
- pci_root PNP0A03:00: host bridge window [mem 0xc7f00000-0xdfffffff]
- pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
- pci 0000:00:00.0: [1002:5957] type 0 class 0x000600
- pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
- pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
- pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:02.0: PME# disabled
- pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604
- pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:0a.0: PME# disabled
- pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
- pci 0000:00:11.0: reg 10: [io 0xb000-0xb007]
- pci 0000:00:11.0: reg 14: [io 0xa000-0xa003]
- pci 0000:00:11.0: reg 18: [io 0x9000-0x9007]
- pci 0000:00:11.0: reg 1c: [io 0x8000-0x8003]
- pci 0000:00:11.0: reg 20: [io 0x7000-0x700f]
- pci 0000:00:11.0: reg 24: [mem 0xf9dfa000-0xf9dfa3ff]
- pci 0000:00:11.0: set SATA to AHCI mode
- pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
- pci 0000:00:12.0: reg 10: [mem 0xf9df3000-0xf9df3fff]
- pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
- pci 0000:00:12.2: reg 10: [mem 0xf9dfa400-0xf9dfa4ff]
- pci 0000:00:12.2: supports D1 D2
- pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
- pci 0000:00:12.2: PME# disabled
- pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
- pci 0000:00:13.0: reg 10: [mem 0xf9df8000-0xf9df8fff]
- pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
- pci 0000:00:13.2: reg 10: [mem 0xf9dfa800-0xf9dfa8ff]
- pci 0000:00:13.2: supports D1 D2
- pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
- pci 0000:00:13.2: PME# disabled
- pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
- pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
- pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
- pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
- pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
- pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
- pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
- pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
- pci 0000:00:14.2: reg 10: [mem 0xf9df4000-0xf9df7fff 64bit]
- pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
- pci 0000:00:14.2: PME# disabled
- pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
- pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
- pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
- pci 0000:00:14.5: reg 10: [mem 0xf9df9000-0xf9df9fff]
- pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
- pci 0000:00:15.0: supports D1 D2
- pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
- pci 0000:00:16.0: reg 10: [mem 0xf9dfb000-0xf9dfbfff]
- pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
- pci 0000:00:16.2: reg 10: [mem 0xf9dfac00-0xf9dfacff]
- pci 0000:00:16.2: supports D1 D2
- pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
- pci 0000:00:16.2: PME# disabled
- pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
- pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
- pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
- pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
- pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
- pci 0000:04:00.0: [10de:0640] type 0 class 0x000300
- pci 0000:04:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
- pci 0000:04:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
- pci 0000:04:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
- pci 0000:04:00.0: reg 24: [io 0xec00-0xec7f]
- pci 0000:04:00.0: reg 30: [mem 0xfe980000-0xfe9fffff pref]
- pci 0000:00:02.0: PCI bridge to [bus 04-04]
- pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
- pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfe9fffff]
- pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
- pci 0000:03:00.0: [1033:0194] type 0 class 0x000c03
- pci 0000:03:00.0: reg 10: [mem 0xf9ffe000-0xf9ffffff 64bit]
- pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
- pci 0000:03:00.0: PME# disabled
- pci 0000:00:0a.0: PCI bridge to [bus 03-03]
- pci 0000:00:0a.0: bridge window [io 0xf000-0x0000] (disabled)
- pci 0000:00:0a.0: bridge window [mem 0xf9f00000-0xf9ffffff]
- pci 0000:00:0a.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- pci 0000:02:06.0: [168c:0023] type 0 class 0x000280
- pci 0000:02:06.0: reg 10: [mem 0xf9ef0000-0xf9efffff]
- pci 0000:02:07.0: [13f6:0111] type 0 class 0x000401
- pci 0000:02:07.0: reg 10: [io 0xd800-0xd8ff]
- pci 0000:02:07.0: supports D1 D2
- pci 0000:00:14.4: PCI bridge to [bus 02-02] (subtractive decode)
- pci 0000:00:14.4: bridge window [io 0xd000-0xdfff]
- pci 0000:00:14.4: bridge window [mem 0xf9e00000-0xf9efffff]
- pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
- pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
- pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
- pci 0000:00:14.4: bridge window [mem 0xc7f00000-0xdfffffff] (subtractive decode)
- pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
- pci 0000:01:00.0: [10ec:8168] type 0 class 0x000200
- pci 0000:01:00.0: reg 10: [io 0xc800-0xc8ff]
- pci 0000:01:00.0: reg 18: [mem 0xcffff000-0xcfffffff 64bit pref]
- pci 0000:01:00.0: reg 20: [mem 0xcfff8000-0xcfffbfff 64bit pref]
- pci 0000:01:00.0: supports D1 D2
- pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- pci 0000:01:00.0: PME# disabled
- pci 0000:00:15.0: PCI bridge to [bus 01-01]
- pci 0000:00:15.0: bridge window [io 0xc000-0xcfff]
- pci 0000:00:15.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
- pci 0000:00:15.0: bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
- pci_bus 0000:00: on NUMA node 0
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
- pci0000:00: Requesting ACPI _OSC control (0x1d)
- pci0000:00: ACPI _OSC control (0x1d) granted
- ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 14 15)
- ACPI: PCI Interrupt Link [LNKB] (IRQs 4 *7 10 11 14 15)
- ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 14 15)
- ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 14 15)
- ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 14 15)
- ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 14 15)
- ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0, disabled.
- vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
- vgaarb: loaded
- SCSI subsystem initialized
- libata version 3.00 loaded.
- Advanced Linux Sound Architecture Driver Version 1.0.23.
- PCI: Using ACPI for IRQ routing
- PCI: pci_cache_line_size set to 64 bytes
- pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
- reserve RAM buffer: 000000000009f000 - 000000000009ffff
- reserve RAM buffer: 00000000c7e90000 - 00000000c7ffffff
- cfg80211: Calling CRDA to update world regulatory domain
- Switching to clocksource hpet
- Switched to NOHz mode on CPU #3
- Switched to NOHz mode on CPU #2
- Switched to NOHz mode on CPU #1
- Switched to NOHz mode on CPU #0
- pnp: PnP ACPI init
- ACPI: bus type pnp registered
- pnp 00:00: [bus 00-ff]
- pnp 00:00: [io 0x0cf8-0x0cff]
- pnp 00:00: [io 0x0000-0x0cf7 window]
- pnp 00:00: [io 0x0d00-0xffff window]
- pnp 00:00: [mem 0x000a0000-0x000bffff window]
- pnp 00:00: [mem 0x000d0000-0x000dffff window]
- pnp 00:00: [mem 0xc7f00000-0xdfffffff window]
- pnp 00:00: [mem 0xf0000000-0xfebfffff window]
- pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
- pnp 00:01: [dma 4]
- pnp 00:01: [io 0x0000-0x000f]
- pnp 00:01: [io 0x0081-0x0083]
- pnp 00:01: [io 0x0087]
- pnp 00:01: [io 0x0089-0x008b]
- pnp 00:01: [io 0x008f]
- pnp 00:01: [io 0x00c0-0x00df]
- pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
- pnp 00:02: [io 0x0070-0x0071]
- pnp 00:02: [irq 8]
- pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
- pnp 00:03: [io 0x0061]
- pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
- pnp 00:04: [io 0x00f0-0x00ff]
- pnp 00:04: [irq 13]
- pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
- pnp 00:05: [io 0x03f8-0x03ff]
- pnp 00:05: [irq 4]
- pnp 00:05: [dma 0 disabled]
- pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
- pnp 00:06: [mem 0xfed00000-0xfed003ff]
- pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
- pnp 00:07: [io 0x0060]
- pnp 00:07: [io 0x0064]
- pnp 00:07: [mem 0xfec00000-0xfec00fff]
- pnp 00:07: [mem 0xfee00000-0xfee00fff]
- system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
- system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
- system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
- pnp 00:08: [io 0x0010-0x001f]
- pnp 00:08: [io 0x0022-0x003f]
- pnp 00:08: [io 0x0062-0x0063]
- pnp 00:08: [io 0x0065-0x006f]
- pnp 00:08: [io 0x0072-0x007f]
- pnp 00:08: [io 0x0080]
- pnp 00:08: [io 0x0084-0x0086]
- pnp 00:08: [io 0x0088]
- pnp 00:08: [io 0x008c-0x008e]
- pnp 00:08: [io 0x0090-0x009f]
- pnp 00:08: [io 0x00a2-0x00bf]
- pnp 00:08: [io 0x00b1]
- pnp 00:08: [io 0x00e0-0x00ef]
- pnp 00:08: [io 0x04d0-0x04d1]
- pnp 00:08: [io 0x040b]
- pnp 00:08: [io 0x04d6]
- pnp 00:08: [io 0x0c00-0x0c01]
- pnp 00:08: [io 0x0c14]
- pnp 00:08: [io 0x0c50-0x0c51]
- pnp 00:08: [io 0x0c52]
- pnp 00:08: [io 0x0c6c]
- pnp 00:08: [io 0x0c6f]
- pnp 00:08: [io 0x0cd0-0x0cd1]
- pnp 00:08: [io 0x0cd2-0x0cd3]
- pnp 00:08: [io 0x0cd4-0x0cd5]
- pnp 00:08: [io 0x0cd6-0x0cd7]
- pnp 00:08: [io 0x0cd8-0x0cdf]
- pnp 00:08: [io 0x0800-0x089f]
- pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
- pnp 00:08: [io 0x0b00-0x0b1f]
- pnp 00:08: [io 0x0b20-0x0b3f]
- pnp 00:08: [io 0x0900-0x090f]
- pnp 00:08: [io 0x0910-0x091f]
- pnp 00:08: [io 0xfe00-0xfefe]
- pnp 00:08: [io 0x0060]
- pnp 00:08: [io 0x0064]
- pnp 00:08: [mem 0xc7f00000-0xc7ffffff]
- pnp 00:08: [mem 0xffb80000-0xffbfffff]
- pnp 00:08: [mem 0xfec10000-0xfec1001f]
- pnp 00:08: [mem 0xfed80000-0xfed80fff]
- pnp 00:08: [mem 0x00000000-0xffffffffffffffff disabled]
- system 00:08: [io 0x04d0-0x04d1] has been reserved
- system 00:08: [io 0x040b] has been reserved
- system 00:08: [io 0x04d6] has been reserved
- system 00:08: [io 0x0c00-0x0c01] has been reserved
- system 00:08: [io 0x0c14] has been reserved
- system 00:08: [io 0x0c50-0x0c51] has been reserved
- system 00:08: [io 0x0c52] has been reserved
- system 00:08: [io 0x0c6c] has been reserved
- system 00:08: [io 0x0c6f] has been reserved
- system 00:08: [io 0x0cd0-0x0cd1] has been reserved
- system 00:08: [io 0x0cd2-0x0cd3] has been reserved
- system 00:08: [io 0x0cd4-0x0cd5] has been reserved
- system 00:08: [io 0x0cd6-0x0cd7] has been reserved
- system 00:08: [io 0x0cd8-0x0cdf] has been reserved
- system 00:08: [io 0x0800-0x089f] has been reserved
- system 00:08: [io 0x0b00-0x0b1f] has been reserved
- system 00:08: [io 0x0b20-0x0b3f] has been reserved
- system 00:08: [io 0x0900-0x090f] has been reserved
- system 00:08: [io 0x0910-0x091f] has been reserved
- system 00:08: [io 0xfe00-0xfefe] has been reserved
- system 00:08: [mem 0xc7f00000-0xc7ffffff] has been reserved
- system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
- system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
- system 00:08: [mem 0xfed80000-0xfed80fff] has been reserved
- system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
- pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
- pnp 00:09: [io 0x0230-0x023f]
- pnp 00:09: [io 0x0290-0x029f]
- pnp 00:09: [io 0x0f40-0x0f4f]
- pnp 00:09: [io 0x0a30-0x0a3f]
- system 00:09: [io 0x0230-0x023f] has been reserved
- system 00:09: [io 0x0290-0x029f] has been reserved
- system 00:09: [io 0x0f40-0x0f4f] has been reserved
- system 00:09: [io 0x0a30-0x0a3f] has been reserved
- system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
- pnp 00:0a: [mem 0xe0000000-0xefffffff]
- system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
- system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
- pnp 00:0b: [mem 0x00000000-0x0009ffff]
- pnp 00:0b: [mem 0x000c0000-0x000cffff]
- pnp 00:0b: [mem 0x000e0000-0x000fffff]
- pnp 00:0b: [mem 0x00100000-0xc7efffff]
- pnp 00:0b: [mem 0xfec00000-0xffffffff]
- pnp 00:0b: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
- pnp 00:0b: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
- pnp 00:0b: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
- pnp 00:0b: disabling [mem 0x00100000-0xc7efffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
- system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved
- system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
- pnp: PnP ACPI: found 12 devices
- ACPI: ACPI bus type pnp unregistered
- pci 0000:00:02.0: PCI bridge to [bus 04-04]
- pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
- pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfe9fffff]
- pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
- pci 0000:00:0a.0: PCI bridge to [bus 03-03]
- pci 0000:00:0a.0: bridge window [io disabled]
- pci 0000:00:0a.0: bridge window [mem 0xf9f00000-0xf9ffffff]
- pci 0000:00:0a.0: bridge window [mem pref disabled]
- pci 0000:00:14.4: PCI bridge to [bus 02-02]
- pci 0000:00:14.4: bridge window [io 0xd000-0xdfff]
- pci 0000:00:14.4: bridge window [mem 0xf9e00000-0xf9efffff]
- pci 0000:00:14.4: bridge window [mem pref disabled]
- pci 0000:00:15.0: PCI bridge to [bus 01-01]
- pci 0000:00:15.0: bridge window [io 0xc000-0xcfff]
- pci 0000:00:15.0: bridge window [mem disabled]
- pci 0000:00:15.0: bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
- pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- pci 0000:00:02.0: setting latency timer to 64
- pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- pci 0000:00:0a.0: setting latency timer to 64
- pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- pci 0000:00:15.0: setting latency timer to 64
- pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
- pci_bus 0000:00: resource 8 [mem 0xc7f00000-0xdfffffff]
- pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
- pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
- pci_bus 0000:04: resource 1 [mem 0xfa000000-0xfe9fffff]
- pci_bus 0000:04: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
- pci_bus 0000:03: resource 1 [mem 0xf9f00000-0xf9ffffff]
- pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
- pci_bus 0000:02: resource 1 [mem 0xf9e00000-0xf9efffff]
- pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
- pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
- pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
- pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000dffff]
- pci_bus 0000:02: resource 8 [mem 0xc7f00000-0xdfffffff]
- pci_bus 0000:02: resource 9 [mem 0xf0000000-0xfebfffff]
- pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
- pci_bus 0000:01: resource 2 [mem 0xcff00000-0xcfffffff 64bit pref]
- NET: Registered protocol family 2
- IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
- TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
- TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- TCP: Hash tables configured (established 262144 bind 65536)
- TCP reno registered
- UDP hash table entries: 2048 (order: 4, 65536 bytes)
- UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
- NET: Registered protocol family 1
- pci 0000:04:00.0: Boot video device
- PCI: CLS 64 bytes, default 64
- Trying to unpack rootfs image as initramfs...
- Freeing initrd memory: 2788k freed
- PCI-DMA: Disabling AGP.
- PCI-DMA: aperture base @ bc000000 size 65536 KB
- PCI-DMA: using GART IOMMU.
- PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
- SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
- SGI XFS Quota Management subsystem
- msgmni has been set to 7919
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
- io scheduler noop registered
- io scheduler cfq registered (default)
- pcieport 0000:00:02.0: setting latency timer to 64
- pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
- pcieport 0000:00:0a.0: setting latency timer to 64
- pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
- pcieport 0000:00:15.0: setting latency timer to 64
- pcieport 0000:00:15.0: irq 42 for MSI/MSI-X
- pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
- pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
- pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
- pcieport 0000:00:0a.0: Signaling PME through PCIe PME interrupt
- pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
- pcie_pme 0000:00:0a.0:pcie01: service driver pcie_pme loaded
- pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
- pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
- pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
- Non-volatile memory driver v1.3
- vesafb: framebuffer at 0xfb000000, mapped to 0xffffc90010100000, using 3072k, total 14336k
- vesafb: mode is 1024x768x16, linelength=2048, pages=1
- vesafb: scrolling: redraw
- vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
- Console: switching to colour frame buffer device 128x48
- fb0: VESA VGA frame buffer device
- input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
- ACPI: Power Button [PWRB]
- input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- ACPI: Power Button [PWRF]
- ACPI: acpi_idle registered with cpuidle
- ACPI: processor limited to max C-state 1
- Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
- serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- brd: module loaded
- loop: module loaded
- ahci 0000:00:11.0: version 3.0
- ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
- ahci 0000:00:11.0: irq 43 for MSI/MSI-X
- ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
- ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
- scsi0 : ahci
- scsi1 : ahci
- scsi2 : ahci
- scsi3 : ahci
- ata1: SATA max UDMA/133 abar m1024@0xf9dfa000 port 0xf9dfa100 irq 43
- ata2: SATA max UDMA/133 abar m1024@0xf9dfa000 port 0xf9dfa180 irq 43
- ata3: SATA max UDMA/133 abar m1024@0xf9dfa000 port 0xf9dfa200 irq 43
- ata4: SATA max UDMA/133 abar m1024@0xf9dfa000 port 0xf9dfa280 irq 43
- i8042: PNP: No PS/2 controller found. Probing ports directly.
- serio: i8042 KBD port at 0x60,0x64 irq 1
- serio: i8042 AUX port at 0x60,0x64 irq 12
- mousedev: PS/2 mouse device common for all mice
- md: raid1 personality registered for level 1
- device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
- cpuidle: using governor ladder
- cpuidle: using governor menu
- ALSA device list:
- No soundcards found.
- TCP cubic registered
- NET: Registered protocol family 17
- lib80211: common routines for IEEE802.11 drivers
- lib80211_crypt: registered algorithm 'NULL'
- Registering the dns_resolver key type
- ata3: SATA link down (SStatus 0 SControl 300)
- ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- ata4.00: ATA-7: Maxtor 6V160E0, VA111630, max UDMA/133
- ata4.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
- ata2.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
- ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- ata1.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
- ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- ata4.00: configured for UDMA/133
- ata2.00: configured for UDMA/133
- ata1.00: configured for UDMA/133
- scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5
- sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
- scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5
- sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
- sd 1:0:0:0: [sdb] Write Protect is off
- sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- scsi 3:0:0:0: Direct-Access ATA Maxtor 6V160E0 VA11 PQ: 0 ANSI: 5
- sd 3:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB)
- sd 3:0:0:0: [sdc] Write Protect is off
- sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
- sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sdb: unknown partition table
- sd 0:0:0:0: [sda] Write Protect is off
- sd 1:0:0:0: [sdb] Attached SCSI disk
- sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sdc: sdc1
- sd 3:0:0:0: [sdc] Attached SCSI disk
- sda: unknown partition table
- sd 0:0:0:0: [sda] Attached SCSI disk
- Freeing unused kernel memory: 432k freed
- md: md0 stopped.
- md: bind<sdb>
- md: bind<sda>
- bio: create slab <bio-1> at 1
- md/raid1:md0: not clean -- starting background reconstruction
- md/raid1:md0: active with 2 out of 2 mirrors
- md0: detected capacity change from 0 to 2000397746176
- md: resync of RAID array md0
- md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
- md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
- md: using 128k window, over a total of 1953513424 blocks.
- md0: unknown partition table
- EXT4-fs (dm-3): INFO: recovery required on readonly filesystem
- EXT4-fs (dm-3): write access will be enabled during recovery
- Refined TSC clocksource calibration: 2809.346 MHz.
- Switching to clocksource tsc
- EXT4-fs (dm-3): orphan cleanup on readonly fs
- EXT4-fs (dm-3): ext4_orphan_cleanup: deleting unreferenced inode 2659
- EXT4-fs (dm-3): ext4_orphan_cleanup: deleting unreferenced inode 2658
- EXT4-fs (dm-3): ext4_orphan_cleanup: deleting unreferenced inode 2404
- EXT4-fs (dm-3): ext4_orphan_cleanup: deleting unreferenced inode 2060
- EXT4-fs (dm-3): ext4_orphan_cleanup: deleting unreferenced inode 194
- EXT4-fs (dm-3): 5 orphan inodes deleted
- EXT4-fs (dm-3): recovery complete
- EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
- udev[852]: starting version 164
- input: PC Speaker as /devices/platform/pcspkr/input/input2
- r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- r8169 0000:01:00.0: setting latency timer to 64
- r8169 0000:01:00.0: (unregistered net_device): unknown MAC, using family default
- r8169 0000:01:00.0: irq 44 for MSI/MSI-X
- r8169 0000:01:00.0: eth0: RTL8168b/8111b at 0xffffc9000003a000, bc:ae:c5:42:51:a6, XID 0c200000 IRQ 44
- sd 0:0:0:0: Attached scsi generic sg0 type 0
- sd 1:0:0:0: Attached scsi generic sg1 type 0
- sd 3:0:0:0: Attached scsi generic sg2 type 0
- rtc_cmos 00:02: RTC can wake from S4
- udev[874]: renamed network interface eth0 to eth3
- rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
- rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- nvidia: module license 'NVIDIA' taints kernel.
- Disabling lock debugging due to kernel taint
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- ehci_hcd 0000:00:12.2: EHCI Host Controller
- ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
- ehci_hcd 0000:00:12.2: QUIRK: Enable exception for AMD Hudson ASPM
- ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- ehci_hcd 0000:00:12.2: debug port 1
- ehci_hcd 0000:00:12.2: irq 17, io mem 0xf9dfa400
- ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 5 ports detected
- ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- ehci_hcd 0000:00:13.2: EHCI Host Controller
- ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
- ehci_hcd 0000:00:13.2: QUIRK: Enable exception for AMD Hudson ASPM
- ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- ehci_hcd 0000:00:13.2: debug port 1
- ehci_hcd 0000:00:13.2: irq 17, io mem 0xf9dfa800
- ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 5 ports detected
- ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- ehci_hcd 0000:00:16.2: EHCI Host Controller
- ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
- ehci_hcd 0000:00:16.2: QUIRK: Enable exception for AMD Hudson ASPM
- ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- ehci_hcd 0000:00:16.2: debug port 1
- ehci_hcd 0000:00:16.2: irq 17, io mem 0xf9dfac00
- ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
- hub 3-0:1.0: USB hub found
- hub 3-0:1.0: 4 ports detected
- ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- ohci_hcd 0000:00:12.0: OHCI Host Controller
- ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
- ohci_hcd 0000:00:12.0: irq 18, io mem 0xf9df3000
- C-Media PCI 0000:02:07.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- hub 4-0:1.0: USB hub found
- hub 4-0:1.0: 5 ports detected
- ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- ohci_hcd 0000:00:13.0: OHCI Host Controller
- ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
- ohci_hcd 0000:00:13.0: irq 18, io mem 0xf9df8000
- hub 5-0:1.0: USB hub found
- hub 5-0:1.0: 5 ports detected
- ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- ohci_hcd 0000:00:14.5: OHCI Host Controller
- ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
- ohci_hcd 0000:00:14.5: irq 18, io mem 0xf9df9000
- hub 6-0:1.0: USB hub found
- hub 6-0:1.0: 2 ports detected
- ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- ohci_hcd 0000:00:16.0: OHCI Host Controller
- ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
- ohci_hcd 0000:00:16.0: irq 18, io mem 0xf9dfb000
- hub 7-0:1.0: USB hub found
- hub 7-0:1.0: 4 ports detected
- usb 1-4: new high speed USB device using ehci_hcd and address 3
- nvidia 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- nvidia 0000:04:00.0: setting latency timer to 64
- vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
- NVRM: loading NVIDIA UNIX x86_64 Kernel Module 270.41.06 Mon Apr 18 14:53:56 PDT 2011
- usb 4-3: new low speed USB device using ohci_hcd and address 2
- phy0 -> rt73usb_validate_eeprom: EEPROM recovery - NIC: 0xffef
- phy0 -> rt73usb_validate_eeprom: EEPROM recovery - Led: 0xe000
- phy0 -> rt73usb_validate_eeprom: EEPROM recovery - RSSI OFFSET A: 0x0000
- phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 2573, rf: 0002, rev: 000a.
- ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- Registered led device: rt73usb-phy0::radio
- Registered led device: rt73usb-phy0::assoc
- Registered led device: rt73usb-phy0::quality
- usbcore: registered new interface driver rt73usb
- udev[861]: renamed network interface wlan0 to wlan2
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
- input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.0/input/input3
- logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:12.0-3/input0
- logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
- input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.1/input/input4
- logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-3/input1
- vboxdrv: Found 4 processor cores.
- VBoxDrv: dbg - g_abExecMemory=ffffffffa0d17700
- vboxdrv: fAsync=0 offMin=0x42b offMax=0x6516
- vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
- vboxdrv: Successfully loaded version 3.2.12 (interface 0x00140001).
- EXT4-fs (dm-3): re-mounted. Opts: (null)
- EXT4-fs (sdc1): mounted filesystem without journal. Opts: (null)
- EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
- EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
- EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
- XFS mounting filesystem dm-5
- Starting XFS recovery on filesystem: dm-5 (logdev: internal)
- Ending XFS recovery on filesystem: dm-5 (logdev: internal)
- Adding 262140k swap on /dev/mapper/master-swap. Priority:-1 extents:1 across:262140k
- phy0 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'.
- phy0 -> rt2x00lib_request_firmware: Info - Firmware detected - version: 1.7.
- phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 102.
- phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 4, CWmax: 5, Aifs: 2, TXop: 188.
- phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 3, TXop: 0.
- phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 7, TXop: 0.
- ioremap error for 0xc7e90000-0xc7e91000, requested 0x10, got 0x0
- ata1.00: configured for UDMA/133
- ata1: EH complete
- ata2.00: configured for UDMA/133
- ata2: EH complete
- ata4.00: configured for UDMA/133
- ata4: EH complete
- EXT4-fs (dm-3): re-mounted. Opts: commit=0
- EXT4-fs (dm-1): re-mounted. Opts: commit=0
- EXT4-fs (dm-2): re-mounted. Opts: commit=0
- EXT4-fs (dm-4): re-mounted. Opts: commit=0
- warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
- NET: Registered protocol family 10
- ADDRCONF(NETDEV_UP): wlan2: link is not ready
- phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 102.
- phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 4, CWmax: 5, Aifs: 2, TXop: 188.
- phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 3, TXop: 0.
- phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 7, TXop: 0.
- ADDRCONF(NETDEV_UP): wlan2: link is not ready
- wlan2: authenticate with 00:12:bf:47:81:79 (try 1)
- wlan2: authenticated
- wlan2: associate with 00:12:bf:47:81:79 (try 1)
- wlan2: RX AssocResp from 00:12:bf:47:81:79 (capab=0x461 status=0 aid=1)
- wlan2: associated
- phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47.
- phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94.
- phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0.
- phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0.
- ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready
- wlan2: no IPv6 routers present
- phy0 -> rt2x00usb_watchdog_tx_status: Warning - TX queue 0 status timed out, invoke forced tx handler
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement