SHARE
TWEET

Fresh boot

a guest Jul 25th, 2014 13 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. Booting Linux on physical CPU 0x0
  2. Initializing cgroup subsys cpu
  3. Linux version 3.10.36 (root@samnazarko-compiler) (gcc version 4.7.1 20120402 (prerelease) (crosstool-NG 1.15.2) ) #4 PREEMPT Sun Apr 13 21:25:32 UTC 2014
  4. CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
  5. CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  6. Machine: BCM2708
  7. Memory policy: ECC disabled, Data cache writeback
  8. On node 0 totalpages: 98304
  9. free_area_init_node: node 0, pgdat c09c9d90, node_mem_map c0a1b000
  10.   Normal zone: 768 pages used for memmap
  11.   Normal zone: 0 pages reserved
  12.   Normal zone: 98304 pages, LIFO batch:31
  13. pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  14. pcpu-alloc: [0] 0
  15. Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 97536
  16. Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708.boardrev=0xf bcm2708.serial=0xfc28dd63 smsc95xx.macaddr=B8:27:EB:28:DD:63 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000  dwc_otg.lpm_enable=0 root=/dev/mmcblk0p2 rootfstype=ext4 noatime quiet rootwait loglevel=1 sdhci-bcm2708.enable_llm=1 dwc_otg.microframe_schedule=1 dwc_otg.fiq_fix_enable=0 dwc_otg.fiq_split_enable=0 dwc_otg.trans_backoff=3000
  17. PID hash table entries: 2048 (order: 1, 8192 bytes)
  18. Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  19. Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  20. Memory: 384MB = 384MB total
  21. Memory: 379340k/379340k available, 13876k reserved, 0K highmem
  22. Virtual kernel memory layout:
  23.     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  24.     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  25.     vmalloc : 0xd8800000 - 0xff000000   ( 616 MB)
  26.     lowmem  : 0xc0000000 - 0xd8000000   ( 384 MB)
  27.     modules : 0xbf000000 - 0xc0000000   (  16 MB)
  28.       .text : 0xc0008000 - 0xc054bffc   (5392 kB)
  29.       .init : 0xc054c000 - 0xc0992c74   (4380 kB)
  30.       .data : 0xc0994000 - 0xc09ca480   ( 218 kB)
  31.        .bss : 0xc09ca480 - 0xc0a1a409   ( 320 kB)
  32. NR_IRQS:460
  33. sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
  34. Switching to timer-based delay loop
  35. Console: colour dummy device 80x30
  36. console [tty0] enabled
  37. Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
  38. pid_max: default: 32768 minimum: 301
  39. Mount-cache hash table entries: 512
  40. Initializing cgroup subsys bfqio
  41. CPU: Testing write buffer coherency: ok
  42. Setting up static identity map for 0xc04b5b40 - 0xc04b5b9c
  43. devtmpfs: initialized
  44. NET: Registered protocol family 16
  45. DMA: preallocated 4096 KiB pool for atomic coherent allocations
  46. bcm2708.uart_clock = 0
  47. mailbox: Broadcom VideoCore Mailbox driver
  48. bcm2708_vcio: mailbox at f200b880
  49. bcm_power: Broadcom power driver
  50. bcm_power_open() -> 0
  51. bcm_power_request(0, 8)
  52. bcm_mailbox_read -> 00000080, 0
  53. bcm_power_request -> 0
  54. Serial: AMBA PL011 UART driver
  55. dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
  56. bio: create slab <bio-0> at 0
  57. SCSI subsystem initialized
  58. usbcore: registered new interface driver usbfs
  59. usbcore: registered new interface driver hub
  60. usbcore: registered new device driver usb
  61. Switching to clocksource stc
  62. FS-Cache: Loaded
  63. CacheFiles: Loaded
  64. NET: Registered protocol family 2
  65. TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  66. TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
  67. TCP: Hash tables configured (established 4096 bind 4096)
  68. TCP: reno registered
  69. UDP hash table entries: 256 (order: 0, 4096 bytes)
  70. UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  71. NET: Registered protocol family 1
  72. RPC: Registered named UNIX socket transport module.
  73. RPC: Registered udp transport module.
  74. RPC: Registered tcp transport module.
  75. RPC: Registered tcp NFSv4.1 backchannel transport module.
  76. bcm2708_dma: DMA manager at f2007000
  77. bcm2708_gpio: bcm2708_gpio_probe c09a0180
  78. vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
  79. major device number 252
  80. vma list size 12, page list size 2008, page size 4096
  81. allocated dma channel 2 (f2007200), initial state 00000008
  82. post-reset 00000008
  83. VFS: Disk quotas dquot_6.5.2
  84. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  85. FS-Cache: Netfs 'nfs' registered for caching
  86. NFS: Registering the id_resolver key type
  87. Key type id_resolver registered
  88. Key type id_legacy registered
  89. msgmni has been set to 740
  90. Key type asymmetric registered
  91. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
  92. io scheduler noop registered
  93. io scheduler deadline registered
  94. io scheduler cfq registered
  95. io scheduler bfq registered (default)
  96. BCM2708FB: allocated DMA memory 56ea0000
  97. BCM2708FB: allocated DMA channel 0 @ f2007000
  98. Console: switching to colour frame buffer device 240x67
  99. uart-pl011 dev:f1: no DMA platform data
  100. brd: module loaded
  101. loop: module loaded
  102. vchiq: vchiq_init_state: slot_zero = 0xd8804000, is_master = 0
  103. bcm2708_spi bcm2708_spi.0: master is unqueued, this is deprecated
  104. bcm2708_spi bcm2708_spi.0: SPI Controller at 0x20204000 (irq 80)
  105. usbcore: registered new interface driver ax88179_178a
  106. usbcore: registered new interface driver smsc95xx
  107. usbcore: registered new interface driver cdc_ncm
  108. dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  109. Core Release: 2.80a
  110. Setting default values for core params
  111. Finished setting default values for core params
  112. Using Buffer DMA mode
  113. Periodic Transfer Interrupt Enhancement - disabled
  114. Multiprocessor Interrupt Enhancement - disabled
  115. OTG VER PARAM: 0, OTG VER FLAG: 0
  116. Dedicated Tx FIFOs mode
  117. dwc_otg: Microframe scheduler enabled
  118. dwc_otg bcm2708_usb: DWC OTG Controller
  119. dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
  120. dwc_otg bcm2708_usb: irq 75, io mem 0x00000000
  121. Init: Port Power? op_state=1
  122. Init: Power Port (0)
  123. usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  124. usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  125. usb usb1: Product: DWC OTG Controller
  126. usb usb1: Manufacturer: Linux 3.10.36 dwc_otg_hcd
  127. usb usb1: SerialNumber: bcm2708_usb
  128. hub 1-0:1.0: USB hub found
  129. hub 1-0:1.0: 1 port detected
  130. dwc_otg: FIQ disabled
  131. dwc_otg: NAK holdoff enabled
  132. dwc_otg: FIQ split fix disabled
  133. Module dwc_common_port init
  134. usbcore: registered new interface driver usb-storage
  135. mousedev: PS/2 mouse device common for all mice
  136. i2c /dev entries driver
  137. device-mapper: uevent: version 1.0.3
  138. device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
  139. bcm2835-cpufreq: min=850000 max=850000 cur=850000
  140. bcm2835-cpufreq: switching to governor ondemand
  141. bcm2835-cpufreq: switching to governor ondemand
  142. cpuidle: using governor ladder
  143. cpuidle: using governor menu
  144. sdhci: Secure Digital Host Controller Interface driver
  145. sdhci: Copyright(c) Pierre Ossman
  146. sdhci: Enable low-latency mode
  147. mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
  148. mmc0: BCM2708 SDHC host at 0x20300000 DMA 4 IRQ 20
  149. sdhci-pltfm: SDHCI platform and OF driver helper
  150. usbcore: registered new interface driver usbhid
  151. usbhid: USB HID core driver
  152. zram: Created 1 device(s) ...
  153. TCP: westwood registered
  154. Initializing XFRM netlink socket
  155. NET: Registered protocol family 17
  156. Key type dns_resolver registered
  157. VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
  158. drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  159. Freeing unused kernel memory: 4376K (c054c000 - c0992000)
  160. mmc0: new high speed SDHC card at address e624
  161. mmcblk0: mmc0:e624 SU04G 3.69 GiB
  162.  mmcblk0: p1 p2
  163. Indeed it is in host mode hprt0 = 00021501
  164. usb 1-1: new high-speed USB device number 2 using dwc_otg
  165. Indeed it is in host mode hprt0 = 00001101
  166. usb 1-1: New USB device found, idVendor=0424, idProduct=9512
  167. usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  168. hub 1-1:1.0: USB hub found
  169. hub 1-1:1.0: 3 ports detected
  170. usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  171. usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  172. usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  173. smsc95xx v1.0.4
  174. smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:28:dd:63
  175. usb 1-1.2: new low-speed USB device number 4 using dwc_otg
  176. usb 1-1.2: New USB device found, idVendor=20a0, idProduct=0001
  177. usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  178. usb 1-1.2: Product: flirc
  179. usb 1-1.2: Manufacturer: flirc.tv
  180. input: flirc.tv flirc as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.0/input/input0
  181. hid-generic 0003:20A0:0001.0001: input: USB HID v1.01 Keyboard [flirc.tv flirc] on usb-bcm2708_usb-1.2/input0
  182. EXT4-fs (mmcblk0p2): ext4_orphan_cleanup: deleting unreferenced inode 1633
  183. EXT4-fs (mmcblk0p2): ext4_orphan_cleanup: deleting unreferenced inode 1623
  184. EXT4-fs (mmcblk0p2): ext4_orphan_cleanup: deleting unreferenced inode 1679
  185. EXT4-fs (mmcblk0p2): ext4_orphan_cleanup: deleting unreferenced inode 1736
  186. EXT4-fs (mmcblk0p2): ext4_orphan_cleanup: deleting unreferenced inode 1760
  187. EXT4-fs (mmcblk0p2): ext4_orphan_cleanup: deleting unreferenced inode 1765
  188. EXT4-fs (mmcblk0p2): ext4_orphan_cleanup: deleting unreferenced inode 1749
  189. EXT4-fs (mmcblk0p2): ext4_orphan_cleanup: deleting unreferenced inode 1764
  190. EXT4-fs (mmcblk0p2): ext4_orphan_cleanup: deleting unreferenced inode 1737
  191. EXT4-fs (mmcblk0p2): ext4_orphan_cleanup: deleting unreferenced inode 1823
  192. EXT4-fs (mmcblk0p2): 10 orphan inodes deleted
  193. EXT4-fs (mmcblk0p2): recovery complete
  194. EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  195. udevd[124]: starting version 175
  196. bcm2708_i2c_init_pinmode(0,0)
  197. bcm2708_i2c_init_pinmode(0,1)
  198. bcm2708_i2c bcm2708_i2c.0: BSC0 Controller at 0x20205000 (irq 79) (baudrate 100000)
  199. bcm2708_i2c_init_pinmode(1,2)
  200. bcm2708_i2c_init_pinmode(1,3)
  201. bcm2708_i2c bcm2708_i2c.1: BSC1 Controller at 0x20804000 (irq 79) (baudrate 100000)
  202. bcm2708-i2s bcm2708-i2s.0: Failed to create debugfs directory
  203. pcm512x 1-004c: Failed to reset device: -5
  204. pcm512x: probe of 1-004c failed with error -5
  205. bcm2835-cpufreq: switching to governor performance
  206. bcm2835-cpufreq: switching to governor performance
  207. EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  208. ip_tables: (C) 2000-2006 Netfilter Core Team
  209. nf_conntrack version 0.5.0 (5995 buckets, 23980 max)
  210. FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  211. Console: switching to colour dummy device 80x30
  212. NET: Registered protocol family 10
  213. smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  214. IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  215. smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x5DE1
  216. IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top