Advertisement
Guest User

Untitled

a guest
Feb 20th, 2021
24
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1.  
  2. U-Boot 1.1.4 (Aug 4 2010 - 20:06:51)
  3.  
  4. AP83 (ar9100) U-boot 0.0.11
  5. DRAM:
  6. sri
  7. 32 MB
  8. id read 0x100000ff
  9. flash size 8MB, sector count = 128
  10. Flash: 8 MB
  11. Using default environment
  12.  
  13. In: serial
  14. Out: serial
  15. Err: serial
  16. Net: ag7100_enet_initialize...
  17. No valid address in Flash. Using fixed address
  18. : cfg1 0xf cfg2 0x7114
  19. eth0: 00:03:7f:09:0b:ad
  20. eth0 up
  21. eth0
  22. Autobooting in 1 seconds## Booting image at bf020000 ...
  23. Uncompressing Kernel Image ... OK
  24.  
  25. Starting kernel ...
  26.  
  27.  
  28.  
  29. OpenWrt kernel loader for AR7XXX/AR9XXX
  30. Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
  31. Looking for OpenWrt image... found at 0xbf022000
  32. Decompressing kernel... done!
  33. Starting kernel at 80060000...
  34.  
  35. [ 0.000000] Linux version 4.14.221 (builder@buildhost) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11306-c4a6851c72)) #0 Mon Feb 15 15:22:37 2021
  36. [ 0.000000] bootconsole [early0] enabled
  37. [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
  38. [ 0.000000] MIPS: machine is TP-Link TL-WR1043ND v1
  39. [ 0.000000] SoC: Atheros AR9132 rev 2
  40. [ 0.000000] Determined physical RAM map:
  41. [ 0.000000] memory: 02000000 @ 00000000 (usable)
  42. [ 0.000000] Initrd not found or empty - disabling initrd
  43. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  44. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  45. [ 0.000000] Zone ranges:
  46. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000001ffffff]
  47. [ 0.000000] Movable zone start for each node
  48. [ 0.000000] Early memory node ranges
  49. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000001ffffff]
  50. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff]
  51. [ 0.000000] random: get_random_bytes called from 0x80501740 with crng_init=0
  52. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 8128
  53. [ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
  54. [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
  55. [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  56. [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  57. [ 0.000000] Writing ErrCtl register=00000000
  58. [ 0.000000] Readback ErrCtl register=00000000
  59. [ 0.000000] Memory: 25852K/32768K available (4037K kernel code, 163K rwdata, 532K rodata, 1212K init, 212K bss, 6916K reserved, 0K cma-reserved)
  60. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  61. [ 0.000000] NR_IRQS: 51
  62. [ 0.000000] CPU clock: 400.000 MHz
  63. [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
  64. [ 0.000013] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
  65. [ 0.007917] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
  66. [ 0.094165] pid_max: default: 32768 minimum: 301
  67. [ 0.099064] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  68. [ 0.105671] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  69. [ 0.117774] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  70. [ 0.127636] futex hash table entries: 256 (order: -1, 3072 bytes)
  71. [ 0.133803] pinctrl core: initialized pinctrl subsystem
  72. [ 0.141875] NET: Registered protocol family 16
  73. [ 0.172341] clocksource: Switched to clocksource MIPS
  74. [ 0.178677] NET: Registered protocol family 2
  75. [ 0.184285] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  76. [ 0.191260] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  77. [ 0.197677] TCP: Hash tables configured (established 1024 bind 1024)
  78. [ 0.204239] UDP hash table entries: 256 (order: 0, 4096 bytes)
  79. [ 0.210081] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  80. [ 0.216690] NET: Registered protocol family 1
  81. [ 0.224704] Crashlog allocated RAM at address 0x1f00000
  82. [ 0.231439] workingset: timestamp_bits=30 max_order=13 bucket_order=0
  83. [ 0.245223] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  84. [ 0.251042] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  85. [ 0.272253] io scheduler noop registered
  86. [ 0.276242] io scheduler deadline registered (default)
  87. [ 0.281794] ar7200-usb-phy usb-phy: phy reset is missing
  88. [ 0.288233] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  89. [ 0.297902] console [ttyS0] disabled
  90. [ 0.301524] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 12500000) is a 8250
  91. [ 0.310101] console [ttyS0] enabled
  92. [ 0.310101] console [ttyS0] enabled
  93. [ 0.317129] bootconsole [early0] disabled
  94. [ 0.317129] bootconsole [early0] disabled
  95. [ 0.335541] m25p80 spi0.0: s25sl064p (8192 Kbytes)
  96. [ 0.340418] 3 fixed-partitions partitions found on MTD device spi0.0
  97. [ 0.346881] Creating 3 MTD partitions on "spi0.0":
  98. [ 0.351714] 0x000000000000-0x000000020000 : "u-boot"
  99. [ 0.357787] 0x000000020000-0x0000007f0000 : "firmware"
  100. [ 0.364269] 2 tplink-fw partitions found on MTD device firmware
  101. [ 0.370231] Creating 2 MTD partitions on "firmware":
  102. [ 0.375295] 0x000000000000-0x000000188623 : "kernel"
  103. [ 0.381251] 0x000000188624-0x0000007d0000 : "rootfs"
  104. [ 0.387236] mtd: device 3 (rootfs) set to be root filesystem
  105. [ 0.393033] 1 squashfs-split partitions found on MTD device rootfs
  106. [ 0.399262] 0x0000003f0000-0x0000007d0000 : "rootfs_data"
  107. [ 0.405676] 0x0000007f0000-0x000000800000 : "art"
  108. [ 0.412123] Realtek RTL8366RB ethernet switch driver version 0.2.4
  109. [ 0.418485] rtl8366rb rtl8366rb: cannot find mdio node phandle
  110. [ 0.542366] rtl8366rb rtl8366rb: using GPIO pins 18 (SDA) and 19 (SCK)
  111. [ 0.549109] rtl8366rb rtl8366rb: RTL5937 ver. 3 chip found
  112. [ 0.788833] libphy: rtl8366rb: probed
  113. [ 0.793490] libphy: Fixed MDIO Bus: probed
  114. [ 1.134217] ag71xx 19000000.eth: connected to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY]
  115. [ 1.144104] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: rgmii
  116. [ 1.153343] NET: Registered protocol family 10
  117. [ 1.164041] Segment Routing with IPv6
  118. [ 1.167855] NET: Registered protocol family 17
  119. [ 1.172454] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  120. [ 1.185506] 8021q: 802.1Q VLAN Support v1.8
  121. [ 1.192443] hctosys: unable to open rtc device (rtc0)
  122. [ 1.204246] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
  123. [ 1.218670] Freeing unused kernel memory: 1212K
  124. [ 1.223264] This architecture does not have kernel memory protection.
  125. [ 2.222650] init: Console is alive
  126. [ 2.226355] init: - watchdog -
  127. [ 2.522366] random: fast init done
  128. [ 3.408819] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  129. [ 3.531138] usbcore: registered new interface driver usbfs
  130. [ 3.536828] usbcore: registered new interface driver hub
  131. [ 3.542284] usbcore: registered new device driver usb
  132. [ 3.554765] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  133. [ 3.563487] ehci-platform: EHCI generic platform driver
  134. [ 3.569033] ehci-platform 1b000100.usb: EHCI Host Controller
  135. [ 3.574849] ehci-platform 1b000100.usb: new USB bus registered, assigned bus number 1
  136. [ 3.582884] ehci-platform 1b000100.usb: irq 3, io mem 0x1b000100
  137. [ 3.612400] ehci-platform 1b000100.usb: USB 2.0 started, EHCI 1.00
  138. [ 3.619762] hub 1-0:1.0: USB hub found
  139. [ 3.624039] hub 1-0:1.0: 1 port detected
  140. [ 3.630005] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  141. [ 3.640082] init: - preinit -
  142. [ 4.956925] random: jshn: uninitialized urandom read (4 bytes read)
  143. [ 5.283509] random: jshn: uninitialized urandom read (4 bytes read)
  144. [ 5.572076] random: jshn: uninitialized urandom read (4 bytes read)
  145. [ 6.792497] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  146. [ 6.798468] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
  147. Press the [f] key and hit [enter] to enter failsafe mode
  148. Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
  149. [ 6.891527] urandom_read: 4 callbacks suppressed
  150. [ 6.891539] random: procd: uninitialized urandom read (4 bytes read)
  151. [ 7.852719] eth0: link up (1000Mbps/Full duplex)
  152. [ 7.857407] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  153. [ 7.864341] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
  154. [ 10.221100] jffs2: notice: (467) jffs2_build_xattr_subsystem: complete building xattr subsystem, 36 of xdatum (0 unchecked, 34 orphan) and 84 of xref (28 dead, 44 orphan) found.
  155. [ 10.238578] mount_root: switching to jffs2 overlay
  156. [ 10.276172] overlayfs: upper fs does not support tmpfile.
  157. [ 10.291476] urandom-seed: Seeding with /etc/urandom.seed
  158. [ 10.458813] eth0: link down
  159. [ 10.486360] procd: - early -
  160. [ 10.489400] procd: - watchdog -
  161. [ 11.266523] procd: - watchdog -
  162. [ 11.270078] procd: - ubus -
  163. [ 11.379908] random: ubusd: uninitialized urandom read (4 bytes read)
  164. [ 11.490542] random: ubusd: uninitialized urandom read (4 bytes read)
  165. [ 11.498801] procd: - init -
  166. Please press Enter to activate this console.
  167. [ 12.373433] kmodloader: loading kernel modules from /etc/modules.d/*
  168. [ 12.608015] ip6_tables: (C) 2000-2006 Netfilter Core Team
  169. [ 12.634559] Loading modules backported from Linux version v4.19.161-0-gdaefdc9eb24b
  170. [ 12.642270] Backport generated by backports.git v4.19.161-1-0-g4bb568fe
  171. [ 12.675276] ip_tables: (C) 2000-2006 Netfilter Core Team
  172. [ 12.702652] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
  173. [ 12.852564] xt_time: kernel timezone is -0000
  174. [ 12.988866] PPP generic driver version 2.4.2
  175. [ 13.003851] NET: Registered protocol family 24
  176. [ 13.195964] ieee80211 phy0: Atheros AR9100 MAC/BB Rev:7 AR2133 RF Rev:a2 mem=0xb80c0000, irq=2
  177. [ 13.562854] kmodloader: done loading kernel modules from /etc/modules.d/*
  178. [ 13.620855] urngd: v1.0.2 started.
  179. [ 14.538516] random: crng init done
  180. [ 31.917779] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  181. [ 31.924117] eth0: link up (1000Mbps/Full duplex)
  182. [ 31.928783] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  183. [ 31.957329] br-lan: port 1(eth0.1) entered blocking state
  184. [ 31.962851] br-lan: port 1(eth0.1) entered disabled state
  185. [ 31.968702] device eth0.1 entered promiscuous mode
  186. [ 31.973600] device eth0 entered promiscuous mode
  187. [ 31.998197] br-lan: port 1(eth0.1) entered blocking state
  188. [ 32.003715] br-lan: port 1(eth0.1) entered forwarding state
  189. [ 32.009587] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  190. [ 32.972950] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  191. ^A
  192.  
  193.  
  194. BusyBox v1.30.1 () built-in shell (ash)
  195.  
  196. _______ ________ __
  197. | |.-----.-----.-----.| | | |.----.| |_
  198. | - || _ | -__| || | | || _|| _|
  199. |_______|| __|_____|__|__||________||__| |____|
  200. |__| W I R E L E S S F R E E D O M
  201. -----------------------------------------------------
  202. OpenWrt 19.07.7, r11306-c4a6851c72
  203. -----------------------------------------------------
  204. === WARNING! =====================================
  205. There is no root password defined on this device!
  206. Use the "passwd" command to set up a new password
  207. in order to prevent unauthorized SSH logins.
  208. --------------------------------------------------
  209. root@OpenWrt:/#
Advertisement
RAW Paste Data Copied
Advertisement