[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): Start kernel
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): set_task_stack_end_magic
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): smp_setup_processor_id
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): debug_objects_early_init
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): init_vmlinux_build_id
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): cgroup_init_early
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): local_irq_disable
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): boot_cpu_init
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): page_address_init
[    0.000000] Linux version 6.1.82 (lubuntu@lubuntu-20bg001kms) (arm-ostl-linux-gnueabi-gcc (GCC) 12.3.0, GNU ld (GNU Binutils) 2.40.0.20230703) #15 PREEMPT Wed Sep  4 00:12:06 CEST 2024
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): early_security_init
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: STMicroelectronics custom STM32CubeMX board - openstlinux-6.1-yocto-mickledore-mpu-v24.06.26
[    0.000000] Memory policy: Data cache writeback
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created DMA memory pool at 0x10000000, size 0 MiB
[    0.000000] OF: reserved mem: initialized node mcuram2@10000000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x10040000, size 0 MiB
[    0.000000] OF: reserved mem: initialized node vdev0vring0@10040000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x10041000, size 0 MiB
[    0.000000] OF: reserved mem: initialized node vdev0vring1@10041000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x10042000, size 0 MiB
[    0.000000] OF: reserved mem: initialized node vdev0buffer@10042000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x10048000, size 0 MiB
[    0.000000] OF: reserved mem: initialized node mcu-rsc-table@10048000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x30000000, size 0 MiB
[    0.000000] OF: reserved mem: initialized node mcuram@30000000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x38000000, size 0 MiB
[    0.000000] OF: reserved mem: initialized node retram@38000000, compatible id shared-dma-pool
[    0.000000] cma: Reserved 64 MiB at 0xdc000000
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000c0000000-0x00000000dfffffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000c0000000-0x00000000dfffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000c0000000-0x00000000dfffffff]
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.1
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): setup_arch
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): setup_boot_config
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): setup_command_line
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): setup_nr_cpu_ids
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): setup_per_cpu_areas
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): smp_prepare_boot_cpu
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): boot_cpu_hotplug_init
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 129920
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): build_all_zonelists
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): page_alloc_init
[    0.000000] Kernel command line: root=PARTUUID=e91c4e10-16e6-4c0e-bd0e-77becf4a3582 rootwait rw console=ttySTM0,115200 rootwait rw console=ttySTM0,115200 dyndbg="file init/main.c +p" loglevel=8 earlyprintk debug log_buf_len=4M
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): jump_label_init
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): parse_early_param
[    0.000000] Unknown kernel command line parameters "earlyprintk", will be passed to user space.
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): print_unknown_bootoptions
[    0.000000] printk: log_buf_len: 4194304 bytes
[    0.000000] printk: early log buf free: 60596(92%)
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): setup_log_buf
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): vfs_caches_init_early
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): sort_main_extable
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): trap_init
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 410220K/524288K available (12288K kernel code, 1393K rwdata, 3824K rodata, 1024K init, 223K bss, 48532K reserved, 65536K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): mm_init
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): poking_init
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): ftrace_init
[    0.000000] trace event string verifier disabled
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): early_trace_init
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): radix_tree_init
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): maple_tree_init
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): housekeeping_init
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): workqueue_init_early
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): rcu_init
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): trace_init
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): context_tracking_init
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): early_irq_init
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): init_IRQ
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): tick_init
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): rcu_init_nohz
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): init_timers
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): srcu_init
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): hrtimers_init
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): softirq_init
[    0.000000] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): timekeeping_init
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000021] Switching to timer-based delay loop, resolution 41ns
[    0.000854] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): time_init
[    0.000868] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): random_init
[    0.001201] Console: colour dummy device 80x30
[    0.001252] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.001274] CPU: Testing write buffer coherency: ok
[    0.001344] pid_max: default: 32768 minimum: 301
[    0.001655] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.001682] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.002499] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): proc_root_init
[    0.002569] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): cpuset_init
[    0.002889] asmlinkage __visible void __init __no_sanitize_address start_kernel(void): kcsan_init
[    0.003262] static int __ref kernel_init(void *unused):  	wait_for_completion(&kthreadd_done);
[    0.003276] static int __ref kernel_init(void *unused):  kernel_init_freeable();
[    0.004526] cblist_init_generic: Setting adjustable number of callback queues.
[    0.004542] cblist_init_generic: Setting shift to 0 and lim to 1.
[    0.004724] cblist_init_generic: Setting adjustable number of callback queues.
[    0.004734] cblist_init_generic: Setting shift to 0 and lim to 1.
[    0.004913] Fn name = trace_init_flags_sys_exit
[    0.004924] fn not black listed. Let's see if that was good choice
[    0.004929] Made trace init call start on fn. Begin call the function
[    0.004934] Function fn called: 0 = fn();
[    0.004941] Made trace init call stop on fn
[    0.004950] Fn name = trace_init_flags_sys_enter
[    0.004955] fn not black listed. Let's see if that was good choice
[    0.004960] Made trace init call start on fn. Begin call the function
[    0.004964] Function fn called: 0 = fn();
[    0.004969] Made trace init call stop on fn
[    0.004978] Fn name = allocate_overflow_stacks
[    0.004984] fn not black listed. Let's see if that was good choice
[    0.004988] Made trace init call start on fn. Begin call the function
[    0.004997] Function fn called: 0 = fn();
[    0.005003] Made trace init call stop on fn
[    0.005014] Fn name = cpu_suspend_alloc_sp
[    0.005019] fn not black listed. Let's see if that was good choice
[    0.005023] Made trace init call start on fn. Begin call the function
[    0.005030] Function fn called: 0 = fn();
[    0.005035] Made trace init call stop on fn
[    0.005045] Fn name = init_static_idmap
[    0.005050] fn not black listed. Let's see if that was good choice
[    0.005054] Made trace init call start on fn. Begin call the function
[    0.005085] Setting up static identity map for 0xc0100000 - 0xc0100060
[    0.005096] Function fn called: 0 = fn();
[    0.005102] Made trace init call stop on fn
[    0.005113] Fn name = spawn_ksoftirqd
[    0.005119] fn not black listed. Let's see if that was good choice
[    0.005123] Made trace init call start on fn. Begin call the function
[    0.005326] Function fn called: 0 = fn();
[    0.005338] Made trace init call stop on fn
[    0.005354] Fn name = srcu_bootup_announce
[    0.005362] fn not black listed. Let's see if that was good choice
[    0.005366] Made trace init call start on fn. Begin call the function
[    0.005370] rcu: Hierarchical SRCU implementation.
[    0.005375] rcu: 	Max phase no-delay instances is 1000.
[    0.005382] Function fn called: 0 = fn();
[    0.005387] Made trace init call stop on fn
[    0.005400] Fn name = rcu_sysrq_init
[    0.005405] fn not black listed. Let's see if that was good choice
[    0.005409] Made trace init call start on fn. Begin call the function
[    0.005413] Function fn called: 0 = fn();
[    0.005418] Made trace init call stop on fn
[    0.005429] Fn name = check_cpu_stall_init
[    0.005434] fn not black listed. Let's see if that was good choice
[    0.005438] Made trace init call start on fn. Begin call the function
[    0.005444] Function fn called: 0 = fn();
[    0.005450] Made trace init call stop on fn
[    0.005460] Fn name = rcu_spawn_gp_kthread
[    0.005466] fn not black listed. Let's see if that was good choice
[    0.005470] Made trace init call start on fn. Begin call the function
[    0.005634] Function fn called: 0 = fn();
[    0.005645] Made trace init call stop on fn
[    0.005656] Fn name = init_kprobes
[    0.005662] fn not black listed. Let's see if that was good choice
[    0.005666] Made trace init call start on fn. Begin call the function
[    0.005859] Function fn called: 0 = fn();
[    0.005867] Made trace init call stop on fn
[    0.005876] Fn name = init_trace_printk
[    0.005883] fn not black listed. Let's see if that was good choice
[    0.005887] Made trace init call start on fn. Begin call the function
[    0.005892] Function fn called: 0 = fn();
[    0.005898] Made trace init call stop on fn
[    0.005906] Fn name = event_trace_enable_again
[    0.005911] fn not black listed. Let's see if that was good choice
[    0.005915] Made trace init call start on fn. Begin call the function
[    0.005922] Function fn called: 0 = fn();
[    0.005927] Made trace init call stop on fn
[    0.005935] Fn name = irq_work_init_threads
[    0.005940] fn not black listed. Let's see if that was good choice
[    0.005945] Made trace init call s
[    0.037173] fn not black listed. Let's see if that was good choice
[    0.037178] Made trace init call start on fn. Begin call the function
[    0.037215] Function fn called: 0 = fn();
[    0.037222] Made trace init call stop on fn
[    0.037235] Fn name = virtio_init
[    0.037241] fn not black listed. Let's see if that was good choice
[    0.037246] Made trace init call start on fn. Begin call the function
[    0.037297] Function fn called: 0 = fn();
[    0.037305] Made trace init call stop on fn
[    0.037318] Fn name = regulator_init
[    0.037324] fn not black listed. Let's see if that was good choice
[    0.037328] Made trace init call start on fn. Begin call the function
[    0.037866] Function fn called: 0 = fn();
[    0.037878] Made trace init call stop on fn
[    0.037894] Fn name = component_debug_init
[    0.037899] fn not black listed. Let's see if that was good choice
[    0.037903] Made trace init call start on fn. Begin call the function
[    0.037922] Function fn called: 0 = fn();
[    0.037928] Made trace init call stop on fn
[    0.037960] Fn name = genpd_bus_init
[    0.037966] fn not black listed. Let's see if that was good choice
[    0.037970] Made trace init call start on fn. Begin call the function
[    0.038027] Function fn called: 0 = fn();
[    0.038035] Made trace init call stop on fn
[    0.038048] Fn name = soc_bus_register
[    0.038053] fn not black listed. Let's see if that was good choice
[    0.038058] Made trace init call start on fn. Begin call the function
[    0.038102] Function fn called: 0 = fn();
[    0.038110] Made trace init call stop on fn
[    0.038121] Fn name = opp_debug_init
[    0.038126] fn not black listed. Let's see if that was good choice
[    0.038130] Made trace init call start on fn. Begin call the function
[    0.038149] Function fn called: 0 = fn();
[    0.038155] Made trace init call stop on fn
[    0.038165] Fn name = cpufreq_core_init
[    0.038171] fn not black listed. Let's see if that was good choice
[    0.038175] Made trace init call start on fn. Begin call the function
[    0.038190] Function fn called: 0 = fn();
[    0.038197] Made trace init call stop on fn
[    0.038207] Fn name = cpufreq_gov_performance_init
[    0.038213] fn not black listed. Let's see if that was good choice
[    0.038217] Made trace init call start on fn. Begin call the function
[    0.038223] Function fn called: 0 = fn();
[    0.038228] Made trace init call stop on fn
[    0.038238] Fn name = CPU_FREQ_GOV_ONDEMAND_init
[    0.038243] fn not black listed. Let's see if that was good choice
[    0.038247] Made trace init call start on fn. Begin call the function
[    0.038253] Function fn called: 0 = fn();
[    0.038258] Made trace init call stop on fn
[    0.038268] Fn name = cpufreq_dt_platdev_init
[    0.038273] fn not black listed. Let's see if that was good choice
[    0.038277] Made trace init call start on fn. Begin call the function
[    0.038439] Function fn called: -19 = fn();
[    0.038448] Made trace init call stop on fn
[    0.038459] Fn name = cpuidle_init
[    0.038465] fn not black listed. Let's see if that was good choice
[    0.038469] Made trace init call start on fn. Begin call the function
[    0.038498] Function fn called: 0 = fn();
[    0.038505] Made trace init call stop on fn
[    0.038519] Fn name = capsule_reboot_register
[    0.038525] fn not black listed. Let's see if that was good choice
[    0.038529] Made trace init call start on fn. Begin call the function
[    0.038535] Function fn called: 0 = fn();
[    0.038541] Made trace init call stop on fn
[    0.038552] Fn name = arm_dmi_init
[    0.038557] fn not black listed. Let's see if that was good choice
[    0.038561] Made trace init call start on fn. Begin call the function
[    0.038567] DMI not present or invalid.
[    0.038572] Function fn called: 0 = fn();
[    0.038577] Made trace init call stop on fn
[    0.038587] Fn name = sock_init
[    0.038592] fn not black listed. Let's see if that was good choice
[    0.038596] Made trace init call start on fn. Begin call the function
[    0.039043] Function fn called: 0 = fn();
[    0.039056] Made trace init call stop on fn
[    0.039071] Fn name = net_inuse_init
[    0.039078] fn not black listed. Let's see if that was good choice
[    0.039083] Made trace init call start on fn. Begin call the function
[    0.039098] Function fn called: 0 = fn();
[    0.039106] Made trace init call stop on fn
[    0.039115] Fn name = net_defaults_init
[    0.039121] fn not black listed. Let's see if that was good choice
[    0.039125] Made trace init call start on fn. Begin call the function
[    0.039131] Function fn called: 0 = fn();
[    0.039137] Made trace init call stop on fn
[    0.039146] Fn name = init_default_flow_dissectors
[    0.039152] fn not black listed. Let's see if that was good choice
[    0.039157] Made trace init call start on fn. Begin call the function
[    0.039163] Function fn called: 0 = fn();
[    0.039169] Made trace init call stop on fn
[    0.039178] Fn name = netlink_proto_init
[    0.039183] fn not black listed. Let's see if that was good choice
[    0.039187] Made trace init call start on fn. Begin call the function
[    0.040174] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.040259] Function fn called: 0 = fn();
[    0.040270] Made trace init call stop on fn
[    0.040292] Fn name = genl_init
[    0.040298] fn not black listed. Let's see if that was good choice
[    0.040302] Made trace init call start on fn. Begin call the function
[    0.040339] Function fn called: 0 = fn();
[    0.040347] Made trace init call stop on fn
[    0.040513] trace_initcall_level(initcall_level_names[2]);= postcore
[    0.040530] Fn name = atomic_pool_init
[    0.040536] fn not black listed. Let's see if that was good choice
[    0.040540] Made trace init call start on fn. Begin call the function
[    0.043052] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.043075] Function fn called: 0 = fn();
[    0.043083] Made trace init call stop on fn
[    0.043103] Fn name = irq_sysfs_init
[    0.043110] fn not black listed. Let's see if that was good choice
[    0.043115] Made trace init call start on fn. Begin call the function
[    0.043765] Function fn called: 0 = fn();
[    0.043775] Made trace init call stop on fn
[    0.043787] Fn name = release_early_probes
[    0.043793] fn not black listed. Let's see if that was good choice
[    0.043798] Made trace init call start on fn. Begin call the function
[    0.043802] Function fn called: 0 = fn();
[    0.043808] Made trace init call stop on fn
[    0.043818] Fn name = bdi_class_init
[    0.043823] fn not black listed. Let's see if that was good choice
[    0.043827] Made trace init call start on fn. Begin call the function
[    0.043907] Function fn called: 0 = fn();
[    0.043916] Made trace init call stop on fn
[    0.043926] Fn name = mm_sysfs_init
[    0.043932] fn not black listed. Let's see if that was good choice
[    0.043936] Made trace init call start on fn. Begin call the function
[    0.043953] Function fn called: 0 = fn();
[    0.043961] Made trace init call stop on fn
[    0.043970] Fn name = init_per_zone_wmark_min
[    0.043976] fn not black listed. Let's see if that was good choice
[    0.043980] Made trace init call start on fn. Begin call the function
[    0.043997] Function fn called: 0 = fn();
[    0.044003] Made trace init call stop on fn
[    0.044013] Fn name = ramoops_init
[    0.044018] fn not black listed. Let's see if that was good choice
[    0.044022] Made trace init call start on fn. Begin call the function
[    0.044084] Function fn called: 0 = fn();
[    0.044092] Made trace init call stop on fn
[    0.044104] Fn name = mpi_init
[    0.044109] fn not black listed. Let's see if that was good choice
[    0.044113] Made trace init call start on fn. Begin call the function
[    0.044123] Function fn called: 0 = fn();
[    0.044128] Made trace init call stop on fn
[    0.044140] Fn name = backlight_class_init
[    0.044145] fn not black listed. Let's see if that was good choice
[    0.044149] Made trace init call start on fn. Begin call the function
[    0.044187] Function fn called: 0 = fn();
[    0.044194] Made trace init call stop on fn
[    0.044206] Fn name = amba_init
[    0.044212] fn not black listed. Let's see if that was good choice
[    0.044216] Made trace init call start on fn. Begin call the function
[    0.044268] Function fn called: 0 = fn();
[    0.044277] Made trace init call stop on fn
[    0.044288] Fn name = tty_class_init
[    0.044293] fn not black listed. Let's see if that was good choice
[    0.044298] Made trace init call start on fn. Begin call the function
[    0.044322] Function fn called: 0 = fn();
[    0.044329] Made trace init call stop on fn
[    0.044339] Fn name = vtconsole_class_init
[    0.044345] fn not black listed. Let's see if that was good choice
[    0.044349] Made trace init call start on fn. Begin call the function
[    0.044495] Function fn called: 0 = fn();
[    0.044503] Made trace init call stop on fn
[    0.044513] Fn name = serdev_init
[    0.044519] fn not black listed. Let's see if that was good choice
[    0.044523] Made trace init call start on fn. Begin call the function
[    0.044572] Function fn called: 0 = fn();
[    0.044580] Made trace init call stop on fn
[    0.044591] Fn name = mipi_dsi_bus_init
[    0.044597] fn not black listed. Let's see if that was good choice
[    0.044601] Made trace init call start on fn. Begin call the function
[    0.044658] Function fn called: 0 = fn();
[    0.044666] Made trace init call stop on fn
[    0.044677] Fn name = devlink_class_init
[    0.044682] fn not black listed. Let's see if that was good choice
[    0.044686] Made trace init call start on fn. Begin call the function
[    0.044714] Function fn called: 0 = fn();
[    0.044721] Made trace init call stop on fn
[    0.044732] Fn name = software_node_init
[    0.044738] fn not black listed. Let's see if that was good choice
[    0.044743] Made trace init call start on fn. Begin call the function
[    0.044756] Function fn called: 0 = fn();
[    0.044762] Made trace init call stop on fn
[    0.044794] Fn name = wakeup_sources_debugfs_init
[    0.044800] fn not black listed. Let's see if that was good choice
[    0.044804] Made trace init call start on fn. Begin call the function
[    0.044831] Function fn called: 0 = fn();
[    0.044839] Made trace init call stop on fn
[    0.044849] Fn name = wakeup_sources_sysfs_init
[    0.044855] fn not black listed. Let's see if that was good choice
[    0.044859] Made trace init call start on fn. Begin call the function
[    0.044890] Function fn called: 0 = fn();
[    0.044898] Made trace init call stop on fn
[    0.044908] Fn name = regmap_initcall
[    0.044914] fn not black listed. Let's see if that was good choice
[    0.044918] Made trace init call start on fn. Begin call the function
[    0.044937] Function fn called: 0 = fn();
[    0.044944] Made trace init call stop on fn
[    0.044954] Fn name = sram_init
[    0.044959] fn not black listed. Let's see if that was good choice
[    0.044964] Made trace init call start on fn. Begin call the function
[    0.045010] Function fn called: 0 = fn();
[    0.045018] Made trace init call stop on fn
[    0.045029] Fn name = syscon_init
[    0.045034] fn not black listed. Let's see if that was good choice
[    0.045039] Made trace init call start on fn. Begin call the function
[    0.045078] Function fn called: 0 = fn();
[    0.045085] Made trace init call stop on fn
[    0.045098] Fn name = spi_init
[    0.045103] fn not black listed. Let's see if that was good choice
[    0.045108] Made trace init call start on fn. Begin call the function
[    0.045194] Function fn called: 0 = fn();
[    0.045202] Made trace init call stop on fn
[    0.045214] Fn name = spmi_init
[    0.045219] fn not black listed. Let's see if that was good choice
[    0.045224] Made trace init call start on fn. Begin call the function
[    0.045269] Function fn called: 0 = fn();
[    0.045277] Made trace init call stop on fn
[    0.045288] Fn name = i2c_init
[    0.045294] fn not black listed. Let's see if that was good choice
[    0.045299] Made trace init call start on fn. Begin call the function
[    0.045387] Function fn called: 0 = fn();
[    0.045395] Made trace init call stop on fn
[    0.045406] Fn name = thermal_init
[    0.045411] fn not black listed. Let's see if that was good choice
[    0.045415] Made trace init call start on fn. Begin call the function
[    0.045422] thermal_sys: Registered thermal governor 'step_wise'
[    0.045450] Function fn called: 0 = fn();
[    0.045457] Made trace init call stop on fn
[    0.045468] Fn name = init_menu
[    0.045474] fn not black listed. Let's see if that was good choice
[    0.045478] Made trace init call start on fn. Begin call the function
[    0.045579] cpuidle: using governor menu
[    0.045588] Function fn called: 0 = fn();
[    0.045595] Made trace init call stop on fn
[    0.045607] Fn name = stm32_hwspinlock_init
[    0.045613] fn not black listed. Let's see if that was good choice
[    0.045617] Made trace init call start on fn. Begin call the function
[    0.045669] Function fn called: 0 = fn();
[    0.045676] Made trace init call stop on fn
[    0.045686] Fn name = rpmsg_init
[    0.045691] fn not black listed. Let's see if that was good choice
[    0.045695] Made trace init call start on fn. Begin call the function
[    0.045775] Function fn called: 0 = fn();
[    0.045784] Made trace init call stop on fn
[    0.045798] Fn name = rpmsg_ns_init
[    0.045803] fn not black listed. Let's see if that was good choice
[    0.045808] Made trace init call start on fn. Begin call the function
[    0.045846] Function fn called: 0 = fn();
[    0.045853] Made trace init call stop on fn
[    0.045868] Fn name = kobject_uevent_init
[    0.045874] fn not black listed. Let's see if that was good choice
[    0.045878] Made trace init call start on fn. Begin call the function
[    0.045915] Function fn called: 0 = fn();
[    0.045923] Made trace init call stop on fn
[    0.046078] trace_initcall_level(initcall_level_names[3]);= arch
[    0.046092] Fn name = gate_vma_init
[    0.046097] fn not black listed. Let's see if that was good choice
[    0.046101] Made trace init call start on fn. Begin call the function
[    0.046106] Function fn called: 0 = fn();
[    0.046112] Made trace init call stop on fn
[    0.046120] Fn name = customize_machine
[    0.046125] fn not black listed. Let's see if that was good choice
[    0.046130] Made trace init call start on fn. Begin call the function
[    0.046134] Function fn called: 0 = fn();
[    0.046139] Made trace init call stop on fn
[    0.046162] Fn name = arch_hw_breakpoint_init
[    0.046168] fn not black listed. Let's see if that was good choice
[    0.046172] Made trace init call start on fn. Begin call the function
[    0.046191] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.046203] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.046211] Function fn called: 0 = fn();
[    0.046216] Made trace init call stop on fn
[    0.046224] Fn name = vdso_init
[    0.046229] fn not black listed. Let's see if that was good choice
[    0.046233] Made trace init call start on fn. Begin call the function
[    0.046264] Function fn called: 0 = fn();
[    0.046269] Made trace init call stop on fn
[    0.046278] Fn name = exceptions_init
[    0.046283] fn not black listed. Let's see if that was good choice
[    0.046287] Made trace init call start on fn. Begin call the function
[    0.046292] Function fn called: 0 = fn();
[    0.046298] Made trace init call stop on fn
[    0.046310] Fn name = kcmp_cookies_init
[    0.046315] fn not black listed. Let's see if that was good choice
[    0.046319] Made trace init call start on fn. Begin call the function
[    0.046359] Function fn called: 0 = fn();
[    0.046366] Made trace init call stop on fn
[    0.046380] Fn name = cryptomgr_init
[    0.046385] fn not black listed. Let's see if that was good choice
[    0.046389] Made trace init call start on fn. Begin call the function
[    0.046395] Function fn called: 0 = fn();
[    0.046401] Made trace init call stop on fn
[    0.046412] Fn name = stm32_sys_bus_init
[    0.046417] fn not black listed. Let's see if that was good choice
[    0.046421] Made trace init call start on fn. Begin call the function
[    0.046480] Function fn called: 0 = fn();
[    0.046487] Made trace init call stop on fn
[    0.046501] Fn name = stm32mp135_pinctrl_init
[    0.046507] fn not black listed. Let's see if that was good choice
[    0.046511] Made trace init call start on fn. Begin call the function
[    0.046555] Function fn called: 0 = fn();
[    0.046563] Made trace init call stop on fn
[    0.046575] Fn name = stm32mp157_pinctrl_init
[    0.046580] fn not black listed. Let's see if that was good choice
[    0.046585] Made trace init call start on fn. Begin call the function
[    0.046625] Function fn called: 0 = fn();
[    0.046632] Made trace init call stop on fn
[    0.046645] Fn name = dma_bus_init
[    0.046652] fn not black listed. Let's see if that was good choice
[    0.046657] Made trace init call start on fn. Begin call the function
[    0.046737] Function fn called: 0 = fn();
[    0.046745] Made trace init call stop on fn
[    0.046759] Fn name = dma_channel_table_init
[    0.046765] fn not black listed. Let's see if that was good choice
[    0.046769] Made trace init call start on fn. Begin call the function
[    0.046813] Function fn called: 0 = fn();
[    0.046819] Made trace init call stop on fn
[    0.046832] Fn name = stm32_dmamux_init
[    0.046838] fn not black listed. Let's see if that was good choice
[    0.046842] Made trace init call start on fn. Begin call the function
[    0.046890] Function fn called: 0 = fn();
[    0.046898] Made trace init call stop on fn
[    0.046908] Fn name = pl011_init
[    0.046914] fn not black listed. Let's see if that was good choice
[    0.046919] Made trace init call start on fn. Begin call the function
[    0.046923] Serial: AMBA PL011 UART driver
[    0.046982] Function fn called: 0 = fn();
[    0.046990] Made trace init call stop on fn
[    0.047003] Fn name = stm32_pwr_init
[    0.047009] fn not black listed. Let's see if that was good choice
[    0.047014] Made trace init call start on fn. Begin call the function
[    0.047054] Function fn called: 0 = fn();
[    0.047061] Made trace init call stop on fn
[    0.047073] Fn name = dmi_id_init
[    0.047079] fn not black listed. Let's see if that was good choice
[    0.047083] Made trace init call start on fn. Begin call the function
[    0.047088] Function fn called: -19 = fn();
[    0.047093] Made trace init call stop on fn
[    0.047107] Fn name = of_platform_default_populate_init
[    0.047112] fn not black listed. Let's see if that was good choice
[    0.047117] Made trace init call start on fn. Begin call the function
[    0.050110] stm32-pm-domain pm_domain: domain core-ret-power-domain registered
[    0.050147] stm32-pm-domain pm_domain: subdomain core-power-domain registered
[    0.050159] stm32-pm-domain pm_domain: domains probed
[    0.085378] platform 5a001000.display-controller: Fixed dependency cycle(s) with /soc/etzpc@5c007000/i2c@5c002000/hdmi-transmitter@39
[    0.088241] platform 4000b000.audio-controller: Fixed dependency cycle(s) with /soc/etzpc@5c007000/i2c@5c002000/hdmi-transmitter@39
[    0.096532] platform connector: Fixed dependency cycle(s) with /soc/etzpc@5c007000/i2c@5c002000/hdmi-transmitter@39
[    0.097234] Function fn called: 0 = fn();
[    0.097247] Made trace init call stop on fn
[    0.097416] trace_initcall_level(initcall_level_names[4]);= subsys
[    0.097444] Fn name = vfp_kmode_exception_hook_init
[    0.097451] fn not black listed. Let's see if that was good choice
[    0.097456] Made trace init call start on fn. Begin call the function
[    0.097462] Function fn called: 0 = fn();
[    0.097468] Made trace init call stop on fn
[    0.097476] Fn name = topology_init
[    0.097482] fn not black listed. Let's see if that was good choice
[    0.097486] Made trace init call start on fn. Begin call the function
[    0.097680] Function fn called: 0 = fn();
[    0.097690] Made trace init call stop on fn
[    0.097704] Fn name = uid_cache_init
[    0.097710] fn not black listed. Let's see if that was good choice
[    0.097714] Made trace init call start on fn. Begin call the function
[    0.097770] Function fn called: 0 = fn();
[    0.097779] Made trace init call stop on fn
[    0.097790] Fn name = param_sysfs_init
[    0.097797] fn not black listed. Let's see if that was good choice
[    0.097801] Made trace init call start on fn. Begin call the function
[    0.113866] Function fn called: 0 = fn();
[    0.113885] Made trace init call stop on fn
[    0.113909] Fn name = user_namespace_sysctl_init
[    0.113917] fn not black listed. Let's see if that was good choice
[    0.113922] Made trace init call start on fn. Begin call the function
[    0.113985] Function fn called: 0 = fn();
[    0.113993] Made trace init call stop on fn
[    0.114006] Fn name = pm_sysrq_init
[    0.114012] fn not black listed. Let's see if that was good choice
[    0.114016] Made trace init call start on fn. Begin call the function
[    0.114091] Function fn called: 0 = fn();
[    0.114100] Made trace init call stop on fn
[    0.114116] Fn name = create_proc_profile
[    0.114122] fn not black listed. Let's see if that was good choice
[    0.114126] Made trace init call start on fn. Begin call the function
[    0.114131] Function fn called: 0 = fn();
[    0.114136] Made trace init call stop on fn
[    0.114149] Fn name = cgroup_sysfs_init
[    0.114154] fn not black listed. Let's see if that was good choice
[    0.114158] Made trace init call start on fn. Begin call the function
[    0.114186] Function fn called: 0 = fn();
[    0.114193] Made trace init call stop on fn
[    0.114206] Fn name = user_namespaces_init
[    0.114211] fn not black listed. Let's see if that was good choice
[    0.114216] Made trace init call start on fn. Begin call the function
[    0.114271] Function fn called: 0 = fn();
[    0.114279] Made trace init call stop on fn
[    0.114293] Fn name = init_optprobes
[    0.114298] fn not black listed. Let's see if that was good choice
[    0.114303] Made trace init call start on fn. Begin call the function
[    0.114309] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.114314] Function fn called: 0 = fn();
[    0.114320] Made trace init call stop on fn
[    0.114329] Fn name = trace_eval_init
[    0.114334] fn not black listed. Let's see if that was good choice
[    0.114338] Made trace init call start on fn. Begin call the function
[    0.114623] Function fn called: 0 = fn();
[    0.114638] Made trace init call stop on fn
[    0.114652] Fn name = send_signal_irq_work_init
[    0.114658] fn not black listed. Let's see if that was good choice
[    0.114663] Made trace init call start on fn. Begin call the function
[    0.114667] Function fn called: 0 = fn();
[    0.114673] Made trace init call stop on fn
[    0.114682] Fn name = dev_map_init
[    0.114687] fn not black listed. Let's see if that was good choice
[    0.114691] Made trace init call start on fn. Begin call the function
[    0.114701] Function fn called: 0 = fn();
[    0.114706] Made trace init call stop on fn
[    0.114714] Fn name = cpu_map_init
[    0.114719] fn not black listed. Let's see if that was good choice
[    0.114723] Made trace init call start on fn. Begin call the function
[    0.114728] Function fn called: 0 = fn();
[    0.114733] Made trace init call stop on fn
[    0.114742] Fn name = netns_bpf_init
[    0.114747] fn not black listed. Let's see if that was good choice
[    0.114751] Made trace init call start on fn. Begin call the function
[    0.114760] Function fn called: 0 = fn();
[    0.114765] Made trace init call stop on fn
[    0.114775] Fn name = oom_init
[    0.114779] fn not black listed. Let's see if that was good choice
[    0.114784] Made trace init call start on fn. Begin call the function
[    0.114974] Function fn called: 0 = fn();
[    0.114986] Made trace init call stop on fn
[    0.114998] Fn name = cgwb_init
[    0.115004] fn not black listed. Let's see if that was good choice
[    0.115009] Made trace init call start on fn. Begin call the function
[    0.115035] Function fn called: 0 = fn();
[    0.115042] Made trace init call stop on fn
[    0.115053] Fn name = default_bdi_init
[    0.115058] fn not black listed. Let's see if that was good choice
[    0.115062] Made trace init call start on fn. Begin call the function
[    0.122270] Function fn called: 0 = fn();
[    0.122285] Made trace init call stop on fn
[    0.122304] Fn name = percpu_enable_async
[    0.122310] fn not black listed. Let's see if that was good choice
[    0.122315] Made trace init call start on fn. Begin call the function
[    0.122319] Function fn called: 0 = fn();
[    0.122324] Made trace init call stop on fn
[    0.122334] Fn name = kcompactd_init
[    0.122339] fn not black listed. Let's see if that was good choice
[    0.122343] Made trace init call start on fn. Begin call the function
[    0.122569] Function fn called: 0 = fn();
[    0.122581] Made trace init call stop on fn
[    0.122599] Fn name = init_reserve_notifier
[    0.122607] fn not black listed. Let's see if that was good choice
[    0.122611] Made trace init call start on fn. Begin call the function
[    0.122616] Function fn called: 0 = fn();
[    0.122621] Made trace init call stop on fn
[    0.122632] Fn name = init_admin_reserve
[    0.122637] fn not black listed. Let's see if that was good choice
[    0.122641] Made trace init call start on fn. Begin call the function
[    0.122646] Function fn called: 0 = fn();
[    0.122651] Made trace init call stop on fn
[    0.122658] Fn name = init_user_reserve
[    0.122663] fn not black listed. Let's see if that was good choice
[    0.122668] Made trace init call start on fn. Begin call the function
[    0.122672] Function fn called: 0 = fn();
[    0.122677] Made trace init call stop on fn
[    0.122688] Fn name = swap_init_sysfs
[    0.122694] fn not black listed. Let's see if that was good choice
[    0.122698] Made trace init call start on fn. Begin call the function
[    0.122726] Function fn called: 0 = fn();
[    0.122734] Made trace init call stop on fn
[    0.122746] Fn name = swapfile_init
[    0.122751] fn not black listed. Let's see if that was good choice
[    0.122755] Made trace init call start on fn. Begin call the function
[    0.122761] Function fn called: 0 = fn();
[    0.122766] Made trace init call stop on fn
[    0.122777] Fn name = mem_cgroup_swap_init
[    0.122782] fn not black listed. Let's see if that was good choice
[    0.122787] Made trace init call start on fn. Begin call the function
[    0.122808] Function fn called: 0 = fn();
[    0.122814] Made trace init call stop on fn
[    0.122826] Fn name = mem_cgroup_init
[    0.122831] fn not black listed. Let's see if that was good choice
[    0.122835] Made trace init call start on fn. Begin call the function
[    0.122842] Function fn called: 0 = fn();
[    0.122848] Made trace init call stop on fn
[    0.122858] Fn name = rsa_init
[    0.122863] fn not black listed. Let's see if that was good choice
[    0.122868] Made trace init call start on fn. Begin call the function
[    0.122893] Function fn called: 0 = fn();
[    0.122900] Made trace init call stop on fn
[    0.122910] Fn name = hmac_module_init
[    0.122915] fn not black listed. Let's see if that was good choice
[    0.122919] Made trace init call start on fn. Begin call the function
[    0.122924] Function fn called: 0 = fn();
[    0.122930] Made trace init call stop on fn
[    0.122939] Fn name = crypto_null_mod_init
[    0.122944] fn not black listed. Let's see if that was good choice
[    0.122948] Made trace init call start on fn. Begin call the function
[    0.122969] Function fn called: 0 = fn();
[    0.122976] Made trace init call stop on fn
[    0.122985] Fn name = md5_mod_init
[    0.122990] fn not black listed. Let's see if that was good choice
[    0.122995] Made trace init call start on fn. Begin call the function
[    0.123003] Function fn called: 0 = fn();
[    0.123010] Made trace init call stop on fn
[    0.123020] Fn name = sha1_generic_mod_init
[    0.123026] fn not black listed. Let's see if that was good choice
[    0.123031] Made trace init call start on fn. Begin call the function
[    0.123039] Function fn called: 0 = fn();
[    0.123045] Made trace init call stop on fn
[    0.123056] Fn name = sha256_generic_mod_init
[    0.123061] fn not black listed. Let's see if that was good choice
[    0.123065] Made trace init call start on fn. Begin call the function
[    0.123085] Function fn called: 0 = fn();
[    0.123092] Made trace init call stop on fn
[    0.123103] Fn name = deflate_mod_init
[    0.123109] fn not black listed. Let's see if that was good choice
[    0.123114] Made trace init call start on fn. Begin call the function
[    0.123132] Function fn called: 0 = fn();
[    0.123139] Made trace init call stop on fn
[    0.123149] Fn name = crc32c_mod_init
[    0.123154] fn not black listed. Let's see if that was good choice
[    0.123158] Made trace init call start on fn. Begin call the function
[    0.123168] Function fn called: 0 = fn();
[    0.123174] Made trace init call stop on fn
[    0.123198] Fn name = lzo_mod_init
[    0.123204] fn not black listed. Let's see if that was good choice
[    0.123208] Made trace init call start on fn. Begin call the function
[    0.123222] Function fn called: 0 = fn();
[    0.123228] Made trace init call stop on fn
[    0.123238] Fn name = lzorle_mod_init
[    0.123244] fn not black listed. Let's see if that was good choice
[    0.123248] Made trace init call start on fn. Begin call the function
[    0.123270] Function fn called: 0 = fn();
[    0.123277] Made trace init call stop on fn
[    0.123287] Fn name = zstd_mod_init
[    0.123293] fn not black listed. Let's see if that was good choice
[    0.123297] Made trace init call start on fn. Begin call the function
[    0.123314] Function fn called: 0 = fn();
[    0.123320] Made trace init call stop on fn
[    0.123330] Fn name = init_bio
[    0.123335] fn not black listed. Let's see if that was good choice
[    0.123339] Made trace init call start on fn. Begin call the function
[    0.123475] Function fn called: 0 = fn();
[    0.123486] Made trace init call stop on fn
[    0.123499] Fn name = blk_ioc_init
[    0.123505] fn not black listed. Let's see if that was good choice
[    0.123510] Made trace init call start on fn. Begin call the function
[    0.123529] Function fn called: 0 = fn();
[    0.123536] Made trace init call stop on fn
[    0.123546] Fn name = blk_mq_init
[    0.123551] fn not black listed. Let's see if that was good choice
[    0.123555] Made trace init call start on fn. Begin call the function
[    0.123562] Function fn called: 0 = fn();
[    0.123567] Made trace init call stop on fn
[    0.123577] Fn name = genhd_device_init
[    0.123582] fn not black listed. Let's see if that was good choice
[    0.123586] Made trace init call start on fn. Begin call the function
[    0.124019] Function fn called: 0 = fn();
[    0.124036] Made trace init call stop on fn
[    0.124052] Fn name = blkcg_init
[    0.124059] fn not black listed. Let's see if that was good choice
[    0.124064] Made trace init call start on fn. Begin call the function
[    0.132153] Function fn called: 0 = fn();
[    0.132169] Made trace init call stop on fn
[    0.132185] Fn name = io_wq_init
[    0.132191] fn not black listed. Let's see if that was good choice
[    0.132195] Made trace init call start on fn. Begin call the function
[    0.132200] Function fn called: 0 = fn();
[    0.132206] Made trace init call stop on fn
[    0.132216] Fn name = sg_pool_init
[    0.132222] fn not black listed. Let's see if that was good choice
[    0.132226] Made trace init call start on fn. Begin call the function
[    0.132351] Function fn called: 0 = fn();
[    0.132361] Made trace init call stop on fn
[    0.132375] Fn name = mcp23s08_i2c_init
[    0.132381] fn not black listed. Let's see if that was good choice
[    0.132385] Made trace init call start on fn. Begin call the function
[    0.132458] Function fn called: 0 = fn();
[    0.132466] Made trace init call stop on fn
[    0.132480] Fn name = mcp23s08_spi_init
[    0.132485] fn not black listed. Let's see if that was good choice
[    0.132489] Made trace init call start on fn. Begin call the function
[    0.132536] Function fn called: 0 = fn();
[    0.132543] Made trace init call stop on fn
[    0.132555] Fn name = gpiolib_debugfs_init
[    0.132561] fn not black listed. Let's see if that was good choice
[    0.132565] Made trace init call start on fn. Begin call the function
[    0.132599] Function fn called: 0 = fn();
[    0.132606] Made trace init call stop on fn
[    0.132617] Fn name = palmas_gpio_init
[    0.132622] fn not black listed. Let's see if that was good choice
[    0.132626] Made trace init call start on fn. Begin call the function
[    0.132860] Function fn called: 0 = fn();
[    0.132868] Made trace init call stop on fn
[    0.132884] Fn name = tps6586x_gpio_init
[    0.132890] fn not black listed. Let's see if that was good choice
[    0.132895] Made trace init call start on fn. Begin call the function
[    0.132959] Function fn called: 0 = fn();
[    0.132966] Made trace init call stop on fn
[    0.132979] Fn name = tps65910_gpio_init
[    0.132985] fn not black listed. Let's see if that was good choice
[    0.132989] Made trace init call start on fn. Begin call the function
[    0.133048] Function fn called: 0 = fn();
[    0.133055] Made trace init call stop on fn
[    0.133069] Fn name = gpio_twl4030_init
[    0.133075] fn not black listed. Let's see if that was good choice
[    0.133080] Made trace init call start on fn. Begin call the function
[    0.133178] Function fn called: 0 = fn();
[    0.133185] Made trace init call stop on fn
[    0.133198] Fn name = xgpio_init
[    0.133204] fn not black listed. Let's see if that was good choice
[    0.133209] Made trace init call start on fn. Begin call the function
[    0.133303] Function fn called: 0 = fn();
[    0.133310] Made trace init call stop on fn
[    0.133324] Fn name = pwm_debugfs_init
[    0.133330] fn not black listed. Let's see if that was good choice
[    0.133334] Made trace init call start on fn. Begin call the function
[    0.133359] Function fn called: 0 = fn();
[    0.133366] Made trace init call stop on fn
[    0.133377] Fn name = pwm_sysfs_init
[    0.133382] fn not black listed. Let's see if that was good choice
[    0.133386] Made trace init call start on fn. Begin call the function
[    0.133418] Function fn called: 0 = fn();
[    0.133426] Made trace init call stop on fn
[    0.133438] Fn name = fbmem_init
[    0.133444] fn not black listed. Let's see if that was good choice
[    0.133449] Made trace init call start on fn. Begin call the function
[    0.133516] Function fn called: 0 = fn();
[    0.133524] Made trace init call stop on fn
[    0.133539] Fn name = dw_init
[    0.133545] fn not black listed. Let's see if that was good choice
[    0.133549] Made trace init call start on fn. Begin call the function
[    0.133680] Function fn called: 0 = fn();
[    0.133688] Made trace init call stop on fn
[    0.133701] Fn name = fsl_edma_init
[    0.133707] fn not black listed. Let's see if that was good choice
[    0.133711] Made trace init call start on fn. Begin call the function
[    0.133846] Function fn called: 0 = fn();
[    0.133854] Made trace init call stop on fn
[    0.133887] Fn name = stm32_dma_init
[    0.133892] fn not black listed. Let's see if that was good choice
[    0.133897] Made trace init call start on fn. Begin call the function
[    0.134047] Function fn called: 0 = fn();
[    0.134055] Made trace init call stop on fn
[    0.134070] Fn name = stm32_mdma_init
[    0.134076] fn not black listed. Let's see if that was good choice
[    0.134080] Made trace init call start on fn. Begin call the function
[    0.134207] Function fn called: 0 = fn();
[    0.134215] Made trace init call stop on fn
[    0.134225] Fn name = regulator_fixed_voltage_init
[    0.134230] fn not black listed. Let's see if that was good choice
[    0.134234] Made trace init call start on fn. Begin call the function
[    0.134926] Function fn called: 0 = fn();
[    0.134940] Made trace init call stop on fn
[    0.134953] Fn name = as3711_regulator_init
[    0.134959] fn not black listed. Let's see if that was good choice
[    0.134964] Made trace init call start on fn. Begin call the function
[    0.135041] Function fn called: 0 = fn();
[    0.135050] Made trace init call stop on fn
[    0.135061] Fn name = gpio_regulator_init
[    0.135067] fn not black listed. Let's see if that was good choice
[    0.135071] Made trace init call start on fn. Begin call the function
[    0.135179] Function fn called: 0 = fn();
[    0.135187] Made trace init call stop on fn
[    0.135196] Fn name = max8907_regulator_init
[    0.135202] fn not black listed. Let's see if that was good choice
[    0.135206] Made trace init call start on fn. Begin call the function
[    0.135267] Function fn called: 0 = fn();
[    0.135275] Made trace init call stop on fn
[    0.135283] Fn name = max8973_init
[    0.135288] fn not black listed. Let's see if that was good choice
[    0.135292] Made trace init call start on fn. Begin call the function
[    0.135333] Function fn called: 0 = fn();
[    0.135340] Made trace init call stop on fn
[    0.135349] Fn name = palmas_init
[    0.135354] fn not black listed. Let's see if that was good choice
[    0.135359] Made trace init call start on fn. Begin call the function
[    0.135598] Function fn called: 0 = fn();
[    0.135605] Made trace init call stop on fn
[    0.135614] Fn name = tps51632_init
[    0.135619] fn not black listed. Let's see if that was good choice
[    0.135624] Made trace init call start on fn. Begin call the function
[    0.135677] Function fn called: 0 = fn();
[    0.135684] Made trace init call stop on fn
[    0.135693] Fn name = tps62360_init
[    0.135699] fn not black listed. Let's see if that was good choice
[    0.135703] Made trace init call start on fn. Begin call the function
[    0.135744] Function fn called: 0 = fn();
[    0.135752] Made trace init call stop on fn
[    0.135761] Fn name = tps65090_regulator_init
[    0.135767] fn not black listed. Let's see if that was good choice
[    0.135771] Made trace init call start on fn. Begin call the function
[    0.135832] Function fn called: 0 = fn();
[    0.135839] Made trace init call stop on fn
[    0.135848] Fn name = tps65217_regulator_init
[    0.135854] fn not black listed. Let's see if that was good choice
[    0.135858] Made trace init call start on fn. Begin call the function
[    0.135915] Function fn called: 0 = fn();
[    0.135922] Made trace init call stop on fn
[    0.135931] Fn name = tps6586x_regulator_init
[    0.135936] fn not black listed. Let's see if that was good choice
[    0.135940] Made trace init call start on fn. Begin call the function
[    0.135997] Function fn called: 0 = fn();
[    0.136004] Made trace init call stop on fn
[    0.136013] Fn name = tps65910_init
[    0.136018] fn not black listed. Let's see if that was good choice
[    0.136022] Made trace init call start on fn. Begin call the function
[    0.136079] Function fn called: 0 = fn();
[    0.136086] Made trace init call stop on fn
[    0.136095] Fn name = twlreg_init
[    0.136101] fn not black listed. Let's see if that was good choice
[    0.136105] Made trace init call start on fn. Begin call the function
[    0.136533] Function fn called: 0 = fn();
[    0.136540] Made trace init call stop on fn
[    0.136551] Fn name = twlreg_init
[    0.136556] fn not black listed. Let's see if that was good choice
[    0.136561] Made trace init call start on fn. Begin call the function
[    0.137111] Function fn called: 0 = fn();
[    0.137118] Made trace init call stop on fn
[    0.137147] Fn name = misc_init
[    0.137153] fn not black listed. Let's see if that was good choice
[    0.137157] Made trace init call start on fn. Begin call the function
[    0.137213] Function fn called: 0 = fn();
[    0.137221] Made trace init call stop on fn
[    0.137231] Fn name = dp_aux_bus_init
[    0.137236] fn not black listed. Let's see if that was good choice
[    0.137241] Made trace init call start on fn. Begin call the function
[    0.137295] Function fn called: 0 = fn();
[    0.137304] Made trace init call stop on fn
[    0.137316] Fn name = act8945a_i2c_init
[    0.137322] fn not black listed. Let's see if that was good choice
[    0.137326] Made trace init call start on fn. Begin call the function
[    0.137366] Function fn called: 0 = fn();
[    0.137372] Made trace init call stop on fn
[    0.137383] Fn name = stmpe_init
[    0.137389] fn not black listed. Let's see if that was good choice
[    0.137393] Made trace init call start on fn. Begin call the function
[    0.137432] Function fn called: 0 = fn();
[    0.137438] Made trace init call stop on fn
[    0.137449] Fn name = tps65217_init
[    0.137454] fn not black listed. Let's see if that was good choice
[    0.137458] Made trace init call start on fn. Begin call the function
[    0.137509] Function fn called: 0 = fn();
[    0.137517] Made trace init call stop on fn
[    0.137528] Fn name = tps65910_i2c_init
[    0.137535] fn not black listed. Let's see if that was good choice
[    0.137539] Made trace init call start on fn. Begin call the function
[    0.137579] Function fn called: 0 = fn();
[    0.137586] Made trace init call stop on fn
[    0.137597] Fn name = max8907_i2c_init
[    0.137603] fn not black listed. Let's see if that was good choice
[    0.137608] Made trace init call start on fn. Begin call the function
[    0.137647] Function fn called: 0 = fn();
[    0.137653] Made trace init call stop on fn
[    0.137665] Fn name = max8997_i2c_init
[    0.137670] fn not black listed. Let's see if that was good choice
[    0.137675] Made trace init call start on fn. Begin call the function
[    0.137707] Function fn called: 0 = fn();
[    0.137713] Made trace init call stop on fn
[    0.137725] Fn name = max8998_i2c_init
[    0.137730] fn not black listed. Let's see if that was good choice
[    0.137734] Made trace init call start on fn. Begin call the function
[    0.137766] Function fn called: 0 = fn();
[    0.137773] Made trace init call stop on fn
[    0.137784] Fn name = tps6586x_init
[    0.137789] fn not black listed. Let's see if that was good choice
[    0.137794] Made trace init call start on fn. Begin call the function
[    0.137832] Function fn called: 0 = fn();
[    0.137839] Made trace init call stop on fn
[    0.137850] Fn name = pm8xxx_init
[    0.137855] fn not black listed. Let's see if that was good choice
[    0.137860] Made trace init call start on fn. Begin call the function
[    0.138023] Function fn called: 0 = fn();
[    0.138031] Made trace init call stop on fn
[    0.138043] Fn name = tps65090_init
[    0.138049] fn not black listed. Let's see if that was good choice
[    0.138053] Made trace init call start on fn. Begin call the function
[    0.138087] Function fn called: 0 = fn();
[    0.138094] Made trace init call stop on fn
[    0.138105] Fn name = palmas_i2c_init
[    0.138111] fn not black listed. Let's see if that was good choice
[    0.138115] Made trace init call start on fn. Begin call the function
[    0.138153] Function fn called: 0 = fn();
[    0.138160] Made trace init call stop on fn
[    0.138171] Fn name = as3711_i2c_init
[    0.138177] fn not black listed. Let's see if that was good choice
[    0.138181] Made trace init call start on fn. Begin call the function
[    0.138220] Function fn called: 0 = fn();
[    0.138227] Made trace init call stop on fn
[    0.138239] Fn name = dma_buf_init
[    0.138244] fn not black listed. Let's see if that was good choice
[    0.138249] Made trace init call start on fn. Begin call the function
[    0.138370] Function fn called: 0 = fn();
[    0.138380] Made trace init call stop on fn
[    0.138392] Fn name = init_scsi
[    0.138398] fn not black listed. Let's see if that was good choice
[    0.138403] Made trace init call start on fn. Begin call the function
[    0.138759] SCSI subsystem initialized
[    0.138767] Function fn called: 0 = fn();
[    0.138774] Made trace init call stop on fn
[    0.138803] Fn name = ata_init
[    0.138809] fn not black listed. Let's see if that was good choice
[    0.138813] Made trace init call start on fn. Begin call the function
[    0.139246] libata version 3.00 loaded.
[    0.139258] Function fn called: 0 = fn();
[    0.139265] Made trace init call stop on fn
[    0.139283] Fn name = pl022_init
[    0.139290] fn not black listed. Let's see if that was good choice
[    0.139294] Made trace init call start on fn. Begin call the function
[    0.139357] Function fn called: 0 = fn();
[    0.139366] Made trace init call stop on fn
[    0.139379] Fn name = phy_init
[    0.139385] fn not black listed. Let's see if that was good choice
[    0.139389] Made trace init call start on fn. Begin call the function
[    0.139540] Function fn called: 0 = fn();
[    0.139548] Made trace init call stop on fn
[    0.139563] Fn name = usb_common_init
[    0.139569] fn not black listed. Let's see if that was good choice
[    0.139573] Made trace init call start on fn. Begin call the function
[    0.139606] Function fn called: 0 = fn();
[    0.139614] Made trace init call stop on fn
[    0.139626] Fn name = ulpi_init
[    0.139631] fn not black listed. Let's see if that was good choice
[    0.139635] Made trace init call start on fn. Begin call the function
[    0.139700] Function fn called: 0 = fn();
[    0.139708] Made trace init call stop on fn
[    0.139722] Fn name = usb_init
[    0.139728] fn not black listed. Let's see if that was good choice
[    0.139732] Made trace init call start on fn. Begin call the function
[    0.139885] usbcore: registered new interface driver usbfs
[    0.139958] usbcore: registered new interface driver hub
[    0.140036] usbcore: registered new device driver usb
[    0.140046] Function fn called: 0 = fn();
[    0.140052] Made trace init call stop on fn
[    0.140062] Fn name = usb_phy_generic_init
[    0.140068] fn not black listed. Let's see if that was good choice
[    0.140072] Made trace init call start on fn. Begin call the function
[    0.140224] Function fn called: 0 = fn();
[    0.140232] Made trace init call stop on fn
[    0.140245] Fn name = usb_udc_init
[    0.140251] fn not black listed. Let's see if that was good choice
[    0.140255] Made trace init call start on fn. Begin call the function
[    0.140325] Function fn called: 0 = fn();
[    0.140333] Made trace init call stop on fn
[    0.140342] Fn name = usb_roles_init
[    0.140348] fn not black listed. Let's see if that was good choice
[    0.140352] Made trace init call start on fn. Begin call the function
[    0.140378] Function fn called: 0 = fn();
[    0.140386] Made trace init call stop on fn
[    0.140395] Fn name = serio_init
[    0.140401] fn not black listed. Let's see if that was good choice
[    0.140405] Made trace init call start on fn. Begin call the function
[    0.140451] Function fn called: 0 = fn();
[    0.140459] Made trace init call stop on fn
[    0.140468] Fn name = input_init
[    0.140473] fn not black listed. Let's see if that was good choice
[    0.140478] Made trace init call start on fn. Begin call the function
[    0.140522] Function fn called: 0 = fn();
[    0.140531] Made trace init call stop on fn
[    0.140540] Fn name = rtc_init
[    0.140546] fn not black listed. Let's see if that was good choice
[    0.140550] Made trace init call start on fn. Begin call the function
[    0.140577] Function fn called: 0 = fn();
[    0.140584] Made trace init call stop on fn
[    0.140594] Fn name = nmk_i2c_init
[    0.140599] fn not black listed. Let's see if that was good choice
[    0.140604] Made trace init call start on fn. Begin call the function
[    0.140646] Function fn called: 0 = fn();
[    0.140652] Made trace init call stop on fn
[    0.140663] Fn name = cec_devnode_init
[    0.140668] fn not black listed. Let's see if that was good choice
[    0.140673] Made trace init call start on fn. Begin call the function
[    0.140746] Function fn called: 0 = fn();
[    0.140755] Made trace init call stop on fn
[    0.140765] Fn name = pps_init
[    0.140771] fn not black listed. Let's see if that was good choice
[    0.140776] Made trace init call start on fn. Begin call the function
[    0.140804] pps_core: LinuxPPS API ver. 1 registered
[    0.140812] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.140819] Function fn called: 0 = fn();
[    0.140825] Made trace init call stop on fn
[    0.140833] Fn name = ptp_init
[    0.140839] fn not black listed. Let's see if that was good choice
[    0.140843] Made trace init call start on fn. Begin call the function
[    0.140869] PTP clock support registered
[    0.140874] Function fn called: 0 = fn();
[    0.140880] Made trace init call stop on fn
[    0.140908] Fn name = brcmstb_reboot_init
[    0.140913] fn not black listed. Let's see if that was good choice
[    0.140918] Made trace init call start on fn. Begin call the function
[    0.141094] Function fn called: -19 = fn();
[    0.141105] Made trace init call stop on fn
[    0.141117] Fn name = power_supply_class_init
[    0.141124] fn not black listed. Let's see if that was good choice
[    0.141128] Made trace init call start on fn. Begin call the function
[    0.141180] Function fn called: 0 = fn();
[    0.141187] Made trace init call stop on fn
[    0.141197] Fn name = hwmon_init
[    0.141202] fn not black listed. Let's see if that was good choice
[    0.141207] Made trace init call start on fn. Begin call the function
[    0.141232] Function fn called: 0 = fn();
[    0.141239] Made trace init call stop on fn
[    0.141249] Fn name = edac_init
[    0.141254] fn not black listed. Let's see if that was good choice
[    0.141258] Made trace init call start on fn. Begin call the function
[    0.141262] EDAC MC: Ver: 3.0.0
[    0.152034] Function fn called: 0 = fn();
[    0.152051] Made trace init call stop on fn
[    0.152068] Fn name = psci_idle_init_domains
[    0.152075] fn not black listed. Let's see if that was good choice
[    0.152079] Made trace init call start on fn. Begin call the function
[    0.152403] Function fn called: 0 = fn();
[    0.152415] Made trace init call stop on fn
[    0.152429] Fn name = mmc_init
[    0.152436] fn not black listed. Let's see if that was good choice
[    0.152440] Made trace init call start on fn. Begin call the function
[    0.152572] Function fn called: 0 = fn();
[    0.152580] Made trace init call stop on fn
[    0.152592] Fn name = leds_init
[    0.152598] fn not black listed. Let's see if that was good choice
[    0.152602] Made trace init call start on fn. Begin call the function
[    0.152628] Function fn called: 0 = fn();
[    0.152635] Made trace init call stop on fn
[    0.152646] Fn name = dmi_init
[    0.152651] fn not black listed. Let's see if that was good choice
[    0.152655] Made trace init call start on fn. Begin call the function
[    0.152660] Function fn called: 0 = fn();
[    0.152665] Made trace init call stop on fn
[    0.152676] Fn name = scmi_driver_init
[    0.152681] fn not black listed. Let's see if that was good choice
[    0.152685] Made trace init call start on fn. Begin call the function
[    0.152833] Driver 'scmi-optee' was unable to register with bus_type 'tee' because the bus was not initialized.
[    0.152996] Function fn called: 0 = fn();
[    0.153003] Made trace init call stop on fn
[    0.153016] Fn name = efisubsys_init
[    0.153022] fn not black listed. Let's see if that was good choice
[    0.153026] Made trace init call start on fn. Begin call the function
[    0.153032] Function fn called: 0 = fn();
[    0.153037] Made trace init call stop on fn
[    0.153046] Fn name = ipc_init
[    0.153051] fn not black listed. Let's see if that was good choice
[    0.153055] Made trace init call start on fn. Begin call the function
[    0.153119] Function fn called: 0 = fn();
[    0.153126] Made trace init call stop on fn
[    0.153136] Fn name = remoteproc_init
[    0.153141] fn not black listed. Let's see if that was good choice
[    0.153146] Made trace init call start on fn. Begin call the function
[    0.153234] Function fn called: 0 = fn();
[    0.153243] Made trace init call stop on fn
[    0.153253] Fn name = rpmsg_init
[    0.153258] fn not black listed. Let's see if that was good choice
[    0.153262] Made trace init call start on fn. Begin call the function
[    0.153307] Function fn called: 0 = fn();
[    0.153314] Made trace init call stop on fn
[    0.153323] Fn name = devfreq_init
[    0.153329] fn not black listed. Let's see if that was good choice
[    0.153333] Made trace init call start on fn. Begin call the function
[    0.153669] Function fn called: 0 = fn();
[    0.153684] Made trace init call stop on fn
[    0.153698] Fn name = devfreq_event_init
[    0.153703] fn not black listed. Let's see if that was good choice
[    0.153708] Made trace init call start on fn. Begin call the function
[    0.153749] Function fn called: 0 = fn();
[    0.153757] Made trace init call stop on fn
[    0.153767] Fn name = devfreq_simple_ondemand_init
[    0.153773] fn not black listed. Let's see if that was good choice
[    0.153778] Made trace init call start on fn. Begin call the function
[    0.153785] Function fn called: 0 = fn();
[    0.153790] Made trace init call stop on fn
[    0.153798] Fn name = iio_init
[    0.153804] fn not black listed. Let's see if that was good choice
[    0.153808] Made trace init call start on fn. Begin call the function
[    0.153878] Function fn called: 0 = fn();
[    0.153887] Made trace init call stop on fn
[    0.153903] Fn name = arm_pmu_hp_init
[    0.153909] fn not black listed. Let's see if that was good choice
[    0.153913] Made trace init call start on fn. Begin call the function
[    0.153919] Function fn called: 0 = fn();
[    0.153925] Made trace init call stop on fn
[    0.153935] Fn name = ras_init
[    0.153940] fn not black listed. Let's see if that was good choice
[    0.153944] Made trace init call start on fn. Begin call the function
[    0.153969] Function fn called: 0 = fn();
[    0.153975] Made trace init call stop on fn
[    0.153984] Fn name = nvmem_init
[    0.153989] fn not black listed. Let's see if that was good choice
[    0.153994] Made trace init call start on fn. Begin call the function
[    0.154062] Function fn called: 0 = fn();
[    0.154070] Made trace init call stop on fn
[    0.154080] Fn name = tee_init
[    0.154085] fn not black listed. Let's see if that was good choice
[    0.154090] Made trace init call start on fn. Begin call the function
[    0.154161] Function fn called: 0 = fn();
[    0.154169] Made trace init call stop on fn
[    0.154179] Fn name = proto_init
[    0.154185] fn not black listed. Let's see if that was good choice
[    0.154190] Made trace init call start on fn. Begin call the function
[    0.154212] Function fn called: 0 = fn();
[    0.154219] Made trace init call stop on fn
[    0.154228] Fn name = net_dev_init
[    0.154234] fn not black listed. Let's see if that was good choice
[    0.154238] Made trace init call start on fn. Begin call the function
[    0.154822] Function fn called: 0 = fn();
[    0.154836] Made trace init call stop on fn
[    0.154849] Fn name = neigh_init
[    0.154855] fn not black listed. Let's see if that was good choice
[    0.154859] Made trace init call start on fn. Begin call the function
[    0.154871] Function fn called: 0 = fn();
[    0.154877] Made trace init call stop on fn
[    0.154886] Fn name = fib_notifier_init
[    0.154892] fn not black listed. Let's see if that was good choice
[    0.154896] Made trace init call start on fn. Begin call the function
[    0.154910] Function fn called: 0 = fn();
[    0.154917] Made trace init call stop on fn
[    0.154926] Fn name = fib_rules_init
[    0.154932] fn not black listed. Let's see if that was good choice
[    0.154936] Made trace init call start on fn. Begin call the function
[    0.154949] Function fn called: 0 = fn();
[    0.154956] Made trace init call stop on fn
[    0.154980] Fn name = init_cgroup_netprio
[    0.154987] fn not black listed. Let's see if that was good choice
[    0.154991] Made trace init call start on fn. Begin call the function
[    0.154997] Function fn called: 0 = fn();
[    0.155003] Made trace init call stop on fn
[    0.155012] Fn name = bpf_lwt_init
[    0.155017] fn not black listed. Let's see if that was good choice
[    0.155021] Made trace init call start on fn. Begin call the function
[    0.155026] Function fn called: 0 = fn();
[    0.155031] Made trace init call stop on fn
[    0.155040] Fn name = pktsched_init
[    0.155045] fn not black listed. Let's see if that was good choice
[    0.155049] Made trace init call start on fn. Begin call the function
[    0.155074] Function fn called: 0 = fn();
[    0.155081] Made trace init call stop on fn
[    0.155091] Fn name = tc_filter_init
[    0.155096] fn not black listed. Let's see if that was good choice
[    0.155100] Made trace init call start on fn. Begin call the function
[    0.155129] Function fn called: 0 = fn();
[    0.155137] Made trace init call stop on fn
[    0.155146] Fn name = tc_action_init
[    0.155152] fn not black listed. Let's see if that was good choice
[    0.155156] Made trace init call start on fn. Begin call the function
[    0.155163] Function fn called: 0 = fn();
[    0.155169] Made trace init call stop on fn
[    0.155178] Fn name = ethnl_init
[    0.155183] fn not black listed. Let's see if that was good choice
[    0.155187] Made trace init call start on fn. Begin call the function
[    0.155324] Function fn called: 0 = fn();
[    0.155332] Made trace init call stop on fn
[    0.155344] Fn name = nexthop_init
[    0.155350] fn not black listed. Let's see if that was good choice
[    0.155354] Made trace init call start on fn. Begin call the function
[    0.155372] Function fn called: 0 = fn();
[    0.155380] Made trace init call stop on fn
[    0.155392] Fn name = devlink_init
[    0.155398] fn not black listed. Let's see if that was good choice
[    0.155402] Made trace init call start on fn. Begin call the function
[    0.155665] Function fn called: 0 = fn();
[    0.155673] Made trace init call stop on fn
[    0.155687] Fn name = rfkill_init
[    0.155693] fn not black listed. Let's see if that was good choice
[    0.155697] Made trace init call start on fn. Begin call the function
[    0.156068] Function fn called: 0 = fn();
[    0.156081] Made trace init call stop on fn
[    0.156109] Fn name = vsprintf_init_hashval
[    0.156115] fn not black listed. Let's see if that was good choice
[    0.156120] Made trace init call start on fn. Begin call the function
[    0.156132] Function fn called: 0 = fn();
[    0.156138] Made trace init call stop on fn
[    0.156149] Fn name = watchdog_init
[    0.156154] fn not black listed. Let's see if that was good choice
[    0.156158] Made trace init call start on fn. Begin call the function
[    0.156465] Function fn called: 0 = fn();
[    0.156477] Made trace init call stop on fn
[    0.156643] trace_initcall_level(initcall_level_names[5]);= fs
[    0.156662] Fn name = proc_cpu_init
[    0.156668] fn not black listed. Let's see if that was good choice
[    0.156672] Made trace init call start on fn. Begin call the function
[    0.156691] Function fn called: 0 = fn();
[    0.156697] Made trace init call stop on fn
[    0.156708] Fn name = alignment_init
[    0.156713] fn not black listed. Let's see if that was good choice
[    0.156717] Made trace init call start on fn. Begin call the function
[    0.156730] Function fn called: 0 = fn();
[    0.156736] Made trace init call stop on fn
[    0.156746] Fn name = iomem_init_inode
[    0.156752] fn not black listed. Let's see if that was good choice
[    0.156756] Made trace init call start on fn. Begin call the function
[    0.156881] Function fn called: 0 = fn();
[    0.156891] Made trace init call stop on fn
[    0.156907] Fn name = clocksource_done_booting
[    0.156914] fn not black listed. Let's see if that was good choice
[    0.156918] Made trace init call start on fn. Begin call the function
[    0.156943] clocksource: Switched to clocksource arch_sys_counter
[    0.156950] Function fn called: 0 = fn();
[    0.156957] Made trace init call stop on fn
[    0.156966] Fn name = tracer_init_tracefs
[    0.156972] fn not black listed. Let's see if that was good choice
[    0.156977] Made trace init call start on fn. Begin call the function
[    0.157242] Function fn called: 0 = fn();
[    0.157257] Made trace init call stop on fn
[    0.157270] Fn name = init_trace_printk_function_export
[    0.157278] fn not black listed. Let's see if that was good choice
[    0.157282] Made trace init call start on fn. Begin call the function
[    0.157377] Function fn called: 0 = fn();
[    0.157387] Made trace init call stop on fn
[    0.157399] Fn name = bpf_event_init
[    0.157405] fn not black listed. Let's see if that was good choice
[    0.157409] Made trace init call start on fn. Begin call the function
[    0.157416] Function fn called: 0 = fn();
[    0.157422] Made trace init call stop on fn
[    0.157430] Fn name = init_kprobe_trace
[    0.157436] fn not black listed. Let's see if that was good choice
[    0.157440] Made trace init call start on fn. Begin call the function
[    0.157466] Function fn called: 0 = fn();
[    0.157473] Made trace init call stop on fn
[    0.157482] Fn name = init_dynamic_event
[    0.157487] fn not black listed. Let's see if that was good choice
[    0.157492] Made trace init call start on fn. Begin call the function
[    0.157505] Function fn called: 0 = fn();
[    0.157511] Made trace init call stop on fn
[    0.157519] Fn name = init_uprobe_trace
[    0.157525] fn not black listed. Let's see if that was good choice
[    0.157529] Made trace init call start on fn. Begin call the function
[    0.157551] Function fn called: 0 = fn();
[    0.157557] Made trace init call stop on fn
[    0.157565] Fn name = bpf_init
[    0.157570] fn not black listed. Let's see if that was good choice
[    0.157574] Made trace init call start on fn. Begin call the function
[    0.157597] Function fn called: 0 = fn();
[    0.157603] Made trace init call stop on fn
[    0.157617] Fn name = init_fs_stat_sysctls
[    0.157622] fn not black listed. Let's see if that was good choice
[    0.157626] Made trace init call start on fn. Begin call the function
[    0.157649] Function fn called: 0 = fn();
[    0.157655] Made trace init call stop on fn
[    0.157667] Fn name = init_fs_exec_sysctls
[    0.157673] fn not black listed. Let's see if that was good choice
[    0.157677] Made trace init call start on fn. Begin call the function
[    0.157688] Function fn called: 0 = fn();
[    0.157694] Made trace init call stop on fn
[    0.157705] Fn name = init_pipe_fs
[    0.157711] fn not black listed. Let's see if that was good choice
[    0.157715] Made trace init call start on fn. Begin call the function
[    0.157797] Function fn called: 0 = fn();
[    0.157807] Made trace init call stop on fn
[    0.157821] Fn name = init_fs_namei_sysctls
[    0.157828] fn not black listed. Let's see if that was good choice
[    0.157832] Made trace init call start on fn. Begin call the function
[    0.157847] Function fn called: 0 = fn();
[    0.157853] Made trace init call stop on fn
[    0.157865] Fn name = init_fs_dcache_sysctls
[    0.157871] fn not black listed. Let's see if that was good choice
[    0.157875] Made trace init call start on fn. Begin call the function
[    0.157884] Function fn called: 0 = fn();
[    0.157889] Made trace init call stop on fn
[    0.157902] Fn name = init_fs_namespace_sysctls
[    0.157907] fn not black listed. Let's see if that was good choice
[    0.157911] Made trace init call start on fn. Begin call the function
[    0.157920] Function fn called: 0 = fn();
[    0.157926] Made trace init call stop on fn
[    0.157938] Fn name = cgroup_writeback_init
[    0.157944] fn not black listed. Let's see if that was good choice
[    0.157948] Made trace init call start on fn. Begin call the function
[    0.157969] Function fn called: 0 = fn();
[    0.157976] Made trace init call stop on fn
[    0.157989] Fn name = inotify_user_setup
[    0.157995] fn not black listed. Let's see if that was good choice
[    0.157999] Made trace init call start on fn. Begin call the function
[    0.158037] Function fn called: 0 = fn();
[    0.158044] Made trace init call stop on fn
[    0.158057] Fn name = eventpoll_init
[    0.158063] fn not black listed. Let's see if that was good choice
[    0.158067] Made trace init call start on fn. Begin call the function
[    0.158112] Function fn called: 0 = fn();
[    0.158120] Made trace init call stop on fn
[    0.158148] Fn name = anon_inode_init
[    0.158154] fn not black listed. Let's see if that was good choice
[    0.158158] Made trace init call start on fn. Begin call the function
[    0.158220] Function fn called: 0 = fn();
[    0.158229] Made trace init call stop on fn
[    0.158243] Fn name = proc_locks_init
[    0.158249] fn not black listed. Let's see if that was good choice
[    0.158253] Made trace init call start on fn. Begin call the function
[    0.158267] Function fn called: 0 = fn();
[    0.158273] Made trace init call stop on fn
[    0.158282] Fn name = init_fs_coredump_sysctls
[    0.158287] fn not black listed. Let's see if that was good choice
[    0.158291] Made trace init call start on fn. Begin call the function
[    0.158310] Function fn called: 0 = fn();
[    0.158316] Made trace init call stop on fn
[    0.158324] Fn name = iomap_init
[    0.158329] fn not black listed. Let's see if that was good choice
[    0.158333] Made trace init call start on fn. Begin call the function
[    0.158420] Function fn called: 0 = fn();
[    0.158429] Made trace init call stop on fn
[    0.158439] Fn name = proc_cmdline_init
[    0.158444] fn not black listed. Let's see if that was good choice
[    0.158449] Made trace init call start on fn. Begin call the function
[    0.158459] Function fn called: 0 = fn();
[    0.158465] Made trace init call stop on fn
[    0.158472] Fn name = proc_consoles_init
[    0.158478] fn not black listed. Let's see if that was good choice
[    0.158482] Made trace init call start on fn. Begin call the function
[    0.158490] Function fn called: 0 = fn();
[    0.158496] Made trace init call stop on fn
[    0.158503] Fn name = proc_cpuinfo_init
[    0.158508] fn not black listed. Let's see if that was good choice
[    0.158512] Made trace init call start on fn. Begin call the function
[    0.158520] Function fn called: 0 = fn();
[    0.158526] Made trace init call stop on fn
[    0.158533] Fn name = proc_devices_init
[    0.158538] fn not black listed. Let's see if that was good choice
[    0.158542] Made trace init call start on fn. Begin call the function
[    0.158550] Function fn called: 0 = fn();
[    0.158556] Made trace init call stop on fn
[    0.158563] Fn name = proc_interrupts_init
[    0.158568] fn not black listed. Let's see if that was good choice
[    0.158572] Made trace init call start on fn. Begin call the function
[    0.158580] Function fn called: 0 = fn();
[    0.158586] Made trace init call stop on fn
[    0.158593] Fn name = proc_loadavg_init
[    0.158598] fn not black listed. Let's see if that was good choice
[    0.158602] Made trace init call start on fn. Begin call the function
[    0.158610] Function fn called: 0 = fn();
[    0.158615] Made trace init call stop on fn
[    0.158623] Fn name = proc_meminfo_init
[    0.158628] fn not black listed. Let's see if that was good choice
[    0.158632] Made trace init call start on fn. Begin call the function
[    0.158639] Function fn called: 0 = fn();
[    0.158645] Made trace init call stop on fn
[    0.158652] Fn name = proc_stat_init
[    0.158657] fn not black listed. Let's see if that was good choice
[    0.158661] Made trace init call start on fn. Begin call the function
[    0.158670] Function fn called: 0 = fn();
[    0.158675] Made trace init call stop on fn
[    0.158683] Fn name = proc_uptime_init
[    0.158688] fn not black listed. Let's see if that was good choice
[    0.158692] Made trace init call start on fn. Begin call the function
[    0.158700] Function fn called: 0 = fn();
[    0.158706] Made trace init call stop on fn
[    0.158713] Fn name = proc_version_init
[    0.158718] fn not black listed. Let's see if that was good choice
[    0.158722] Made trace init call start on fn. Begin call the function
[    0.158730] Function fn called: 0 = fn();
[    0.158736] Made trace init call stop on fn
[    0.158743] Fn name = proc_softirqs_init
[    0.158748] fn not black listed. Let's see if that was good choice
[    0.158752] Made trace init call start on fn. Begin call the function
[    0.158759] Function fn called: 0 = fn();
[    0.158765] Made trace init call stop on fn
[    0.158772] Fn name = proc_kmsg_init
[    0.158777] fn not black listed. Let's see if that was good choice
[    0.158782] Made trace init call start on fn. Begin call the function
[    0.158789] Function fn called: 0 = fn();
[    0.158795] Made trace init call stop on fn
[    0.158813] Fn name = proc_page_init
[    0.158819] fn not black listed. Let's see if that was good choice
[    0.158823] Made trace init call start on fn. Begin call the function
[    0.158837] Function fn called: 0 = fn();
[    0.158843] Made trace init call stop on fn
[    0.158852] Fn name = init_ramfs_fs
[    0.158857] fn not black listed. Let's see if that was good choice
[    0.158862] Made trace init call start on fn. Begin call the function
[    0.158869] Function fn called: 0 = fn();
[    0.158875] Made trace init call stop on fn
[    0.158887] Fn name = dynamic_debug_init_control
[    0.158892] fn not black listed. Let's see if that was good choice
[    0.158896] Made trace init call start on fn. Begin call the function
[    0.158952] Function fn called: 0 = fn();
[    0.158960] Made trace init call stop on fn
[    0.158970] Fn name = chr_dev_init
[    0.158976] fn not black listed. Let's see if that was good choice
[    0.158980] Made trace init call start on fn. Begin call the function
[    0.183623] Function fn called: 0 = fn();
[    0.183644] Made trace init call stop on fn
[    0.183674] Fn name = hwrng_modinit
[    0.183681] fn not black listed. Let's see if that was good choice
[    0.183686] Made trace init call start on fn. Begin call the function
[    0.183903] Function fn called: 0 = fn();
[    0.183913] Made trace init call stop on fn
[    0.183933] Fn name = firmware_class_init
[    0.183940] fn not black listed. Let's see if that was good choice
[    0.183944] Made trace init call start on fn. Begin call the function
[    0.183955] Function fn called: 0 = fn();
[    0.183961] Made trace init call stop on fn
[    0.183971] Fn name = bcma_init_bus_register
[    0.183977] fn not black listed. Let's see if that was good choice
[    0.183981] Made trace init call start on fn. Begin call the function
[    0.184042] Function fn called: 0 = fn();
[    0.184051] Made trace init call stop on fn
[    0.184062] Fn name = sysctl_core_init
[    0.184068] fn not black listed. Let's see if that was good choice
[    0.184072] Made trace init call start on fn. Begin call the function
[    0.184171] Function fn called: 0 = fn();
[    0.184180] Made trace init call stop on fn
[    0.184192] Fn name = eth_offload_init
[    0.184197] fn not black listed. Let's see if that was good choice
[    0.184202] Made trace init call start on fn. Begin call the function
[    0.184207] Function fn called: 0 = fn();
[    0.184213] Made trace init call stop on fn
[    0.184223] Fn name = inet_init
[    0.184228] fn not black listed. Let's see if that was good choice
[    0.184232] Made trace init call start on fn. Begin call the function
[    0.184338] NET: Registered PF_INET protocol family
[    0.184707] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.187212] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.187263] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.187287] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[    0.187346] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.187438] TCP: Hash tables configured (established 4096 bind 4096)
[    0.187584] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.187622] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.187896] Function fn called: 0 = fn();
[    0.187912] Made trace init call stop on fn
[    0.187938] Fn name = ipv4_offload_init
[    0.187944] fn not black listed. Let's see if that was good choice
[    0.187949] Made trace init call start on fn. Begin call the function
[    0.187956] Function fn called: 0 = fn();
[    0.187961] Made trace init call stop on fn
[    0.187973] Fn name = af_unix_init
[    0.187979] fn not black listed. Let's see if that was good choice
[    0.187983] Made trace init call start on fn. Begin call the function
[    0.188019] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.188063] Function fn called: 0 = fn();
[    0.188072] Made trace init call stop on fn
[    0.188084] Fn name = ipv6_offload_init
[    0.188090] fn not black listed. Let's see if that was good choice
[    0.188094] Made trace init call start on fn. Begin call the function
[    0.188101] Function fn called: 0 = fn();
[    0.188107] Made trace init call stop on fn
[    0.188118] Fn name = init_sunrpc
[    0.188123] fn not black listed. Let's see if that was good choice
[    0.188127] Made trace init call start on fn. Begin call the function
[    0.197264] RPC: Registered named UNIX socket transport module.
[    0.197283] RPC: Registered udp transport module.
[    0.197289] RPC: Registered tcp transport module.
[    0.197295] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.197301] Function fn called: 0 = fn();
[    0.197309] Made trace init call stop on fn
[    0.197329] Fn name = vlan_offload_init
[    0.197336] fn not black listed. Let's see if that was good choice
[    0.197340] Made trace init call start on fn. Begin call the function
[    0.197346] Function fn called: 0 = fn();
[    0.197352] Made trace init call stop on fn
[    0.197367] Fn name = populate_rootfs
[    0.197372] fn not black listed. Let's see if that was good choice
[    0.197376] Made trace init call start on fn. Begin call the function
[    0.197634] Function fn called: 0 = fn();
[    0.197649] Made trace init call stop on fn
[    0.197814] trace_initcall_level(initcall_level_names[6]);= device
[    0.197832] Fn name = armv7_pmu_driver_init
[    0.197838] fn not black listed. Let's see if that was good choice
[    0.197842] Made trace init call start on fn. Begin call the function
[    0.198275] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[    0.198682] Function fn called: 0 = fn();
[    0.198693] Made trace init call stop on fn
[    0.198712] Fn name = arch_uprobes_init
[    0.198718] fn not black listed. Let's see if that was good choice
[    0.198722] Made trace init call start on fn. Begin call the function
[    0.198728] Function fn called: 0 = fn();
[    0.198733] Made trace init call stop on fn
[    0.198745] Fn name = proc_execdomains_init
[    0.198750] fn not black listed. Let's see if that was good choice
[    0.198754] Made trace init call start on fn. Begin call the function
[    0.198768] Function fn called: 0 = fn();
[    0.198774] Made trace init call stop on fn
[    0.198784] Fn name = register_warn_debugfs
[    0.198790] fn not black listed. Let's see if that was good choice
[    0.198794] Made trace init call start on fn. Begin call the function
[    0.198840] Function fn called: 0 = fn();
[    0.198847] Made trace init call stop on fn
[    0.198857] Fn name = ioresources_init
[    0.198863] fn not black listed. Let's see if that was good choice
[    0.198867] Made trace init call start on fn. Begin call the function
[    0.198881] Function fn called: 0 = fn();
[    0.198888] Made trace init call stop on fn
[    0.198900] Fn name = irq_gc_init_ops
[    0.198906] fn not black listed. Let's see if that was good choice
[    0.198910] Made trace init call start on fn. Begin call the function
[    0.198915] Function fn called: 0 = fn();
[    0.198920] Made trace init call stop on fn
[    0.198931] Fn name = irq_pm_init_ops
[    0.198936] fn not black listed. Let's see if that was good choice
[    0.198940] Made trace init call start on fn. Begin call the function
[    0.198945] Function fn called: 0 = fn();
[    0.198950] Made trace init call stop on fn
[    0.198961] Fn name = irq_debugfs_init
[    0.198966] fn not black listed. Let's see if that was good choice
[    0.198970] Made trace init call start on fn. Begin call the function
[    0.199247] Function fn called: 0 = fn();
[    0.199255] Made trace init call stop on fn
[    0.199269] Fn name = proc_modules_init
[    0.199275] fn not black listed. Let's see if that was good choice
[    0.199279] Made trace init call start on fn. Begin call the function
[    0.199291] Function fn called: 0 = fn();
[    0.199297] Made trace init call stop on fn
[    0.199309] Fn name = timekeeping_init_ops
[    0.199315] fn not black listed. Let's see if that was good choice
[    0.199319] Made trace init call start on fn. Begin call the function
[    0.199324] Function fn called: 0 = fn();
[    0.199329] Made trace init call stop on fn
[    0.199340] Fn name = init_clocksource_sysfs
[    0.199346] fn not black listed. Let's see if that was good choice
[    0.199350] Made trace init call start on fn. Begin call the function
[    0.199566] Function fn called: 0 = fn();
[    0.199576] Made trace init call stop on fn
[    0.199590] Fn name = init_timer_list_procfs
[    0.199596] fn not black listed. Let's see if that was good choice
[    0.199600] Made trace init call start on fn. Begin call the function
[    0.199613] Function fn called: 0 = fn();
[    0.199619] Made trace init call stop on fn
[    0.199631] Fn name = alarmtimer_init
[    0.199636] fn not black listed. Let's see if that was good choice
[    0.199640] Made trace init call start on fn. Begin call the function
[    0.199733] Function fn called: 0 = fn();
[    0.199741] Made trace init call stop on fn
[    0.199755] Fn name = init_posix_timers
[    0.199761] fn not black listed. Let's see if that was good choice
[    0.199765] Made trace init call start on fn. Begin call the function
[    0.199813] Function fn called: 0 = fn();
[    0.199821] Made trace init call stop on fn
[    0.199835] Fn name = clockevents_init_sysfs
[    0.199842] fn not black listed. Let's see if that was good choice
[    0.199846] Made trace init call start on fn. Begin call the function
[    0.200047] Function fn called: 0 = fn();
[    0.200057] Made trace init call stop on fn
[    0.200094] Fn name = sched_clock_syscore_init
[    0.200101] fn not black listed. Let's see if that was good choice
[    0.200105] Made trace init call start on fn. Begin call the function
[    0.200109] Function fn called: 0 = fn();
[    0.200116] Made trace init call stop on fn
[    0.200127] Fn name = kallsyms_init
[    0.200132] fn not black listed. Let's see if that was good choice
[    0.200136] Made trace init call start on fn. Begin call the function
[    0.200150] Function fn called: 0 = fn();
[    0.200156] Made trace init call stop on fn
[    0.200168] Fn name = pid_namespaces_init
[    0.200173] fn not black listed. Let's see if that was good choice
[    0.200177] Made trace init call start on fn. Begin call the function
[    0.200208] Function fn called: 0 = fn();
[    0.200215] Made trace init call stop on fn
[    0.200228] Fn name = ikconfig_init
[    0.200233] fn not black listed. Let's see if that was good choice
[    0.200237] Made trace init call start on fn. Begin call the function
[    0.200247] Function fn called: 0 = fn();
[    0.200253] Made trace init call stop on fn
[    0.200260] Fn name = seccomp_sysctl_init
[    0.200265] fn not black listed. Let's see if that was good choice
[    0.200269] Made trace init call start on fn. Begin call the function
[    0.200290] Function fn called: 0 = fn();
[    0.200297] Made trace init call stop on fn
[    0.200305] Fn name = utsname_sysctl_init
[    0.200310] fn not black listed. Let's see if that was good choice
[    0.200315] Made trace init call start on fn. Begin call the function
[    0.200336] Function fn called: 0 = fn();
[    0.200343] Made trace init call stop on fn
[    0.200351] Fn name = init_tracepoints
[    0.200356] fn not black listed. Let's see if that was good choice
[    0.200360] Made trace init call start on fn. Begin call the function
[    0.200368] Function fn called: 0 = fn();
[    0.200373] Made trace init call stop on fn
[    0.200383] Fn name = perf_event_sysfs_init
[    0.200388] fn not black listed. Let's see if that was good choice
[    0.200392] Made trace init call start on fn. Begin call the function
[    0.201033] Function fn called: 0 = fn();
[    0.201042] Made trace init call stop on fn
[    0.201055] Fn name = system_trusted_keyring_init
[    0.201062] fn not black listed. Let's see if that was good choice
[    0.201066] Made trace init call start on fn. Begin call the function
[    0.201071] Initialise system trusted keyrings
[    0.201129] Function fn called: 0 = fn();
[    0.201137] Made trace init call stop on fn
[    0.201151] Fn name = kswapd_init
[    0.201157] fn not black listed. Let's see if that was good choice
[    0.201161] Made trace init call start on fn. Begin call the function
[    0.201790] Trying to unpack rootfs image as initramfs...
[    0.207127] Function fn called: 0 = fn();
[    0.207146] Made trace init call stop on fn
[    0.207168] Fn name = extfrag_debug_init
[    0.207177] fn not black listed. Let's see if that was good choice
[    0.207182] Made trace init call start on fn. Begin call the function
[    0.207243] Function fn called: 0 = fn();
[    0.207252] Made trace init call stop on fn
[    0.207263] Fn name = slab_proc_init
[    0.207269] fn not black listed. Let's see if that was good choice
[    0.207273] Made trace init call start on fn. Begin call the function
[    0.207296] Function fn called: 0 = fn();
[    0.207302] Made trace init call stop on fn
[    0.207312] Fn name = workingset_init
[    0.207318] fn not black listed. Let's see if that was good choice
[    0.207322] Made trace init call start on fn. Begin call the function
[    0.207326] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[    0.207353] Function fn called: 0 = fn();
[    0.207359] Made trace init call stop on fn
[    0.207368] Fn name = proc_vmalloc_init
[    0.207373] fn not black listed. Let's see if that was good choice
[    0.207378] Made trace init call start on fn. Begin call the function
[    0.207387] Function fn called: 0 = fn();
[    0.207393] Made trace init call stop on fn
[    0.207404] Fn name = memblock_init_debugfs
[    0.207409] fn not black listed. Let's see if that was good choice
[    0.207413] Made trace init call start on fn. Begin call the function
[    0.207481] Function fn called: 0 = fn();
[    0.207491] Made trace init call stop on fn
[    0.207502] Fn name = procswaps_init
[    0.207509] fn not black listed. Let's see if that was good choice
[    0.207513] Made trace init call start on fn. Begin call the function
[    0.207524] Function fn called: 0 = fn();
[    0.207530] Made trace init call stop on fn
[    0.207541] Fn name = slab_debugfs_init
[    0.207546] fn not black listed. Let's see if that was good choice
[    0.207550] Made trace init call start on fn. Begin call the function
[    0.207583] Function fn called: 0 = fn();
[    0.207591] Made trace init call stop on fn
[    0.207602] Fn name = slab_sysfs_init
[    0.207608] fn not black listed. Let's see if that was good choice
[    0.207612] Made trace init call start on fn. Begin call the function
[    0.237168] Function fn called: 0 = fn();
[    0.237191] Made trace init call stop on fn
[    0.237217] Fn name = fcntl_init
[    0.237226] fn not black listed. Let's see if that was good choice
[    0.237232] Made trace init call start on fn. Begin call the function
[    0.237263] Function fn called: 0 = fn();
[    0.237271] Made trace init call stop on fn
[    0.237284] Fn name = proc_filesystems_init
[    0.237290] fn not black listed. Let's see if that was good choice
[    0.237294] Made trace init call start on fn. Begin call the function
[    0.237316] Function fn called: 0 = fn();
[    0.237322] Made trace init call stop on fn
[    0.237336] Fn name = start_dirtytime_writeback
[    0.237341] fn not black listed. Let's see if that was good choice
[    0.237345] Made trace init call start on fn. Begin call the function
[    0.237355] Function fn called: 0 = fn();
[    0.237361] Made trace init call stop on fn
[    0.237373] Fn name = dio_init
[    0.237378] fn not black listed. Let's see if that was good choice
[    0.237383] Made trace init call start on fn. Begin call the function
[    0.237580] Function fn called: 0 = fn();
[    0.237591] Made trace init call stop on fn
[    0.237606] Fn name = dnotify_init
[    0.237613] fn not black listed. Let's see if that was good choice
[    0.237617] Made trace init call start on fn. Begin call the function
[    0.237666] Function fn called: 0 = fn();
[    0.237673] Made trace init call stop on fn
[    0.237687] Fn name = aio_setup
[    0.237693] fn not black listed. Let's see if that was good choice
[    0.237697] Made trace init call start on fn. Begin call the function
[    0.237815] Function fn called: 0 = fn();
[    0.237826] Made trace init call stop on fn
[    0.237836] Fn name = mbcache_init
[    0.237842] fn not black listed. Let's see if that was good choice
[    0.237846] Made trace init call start on fn. Begin call the function
[    0.237983] Function fn called: 0 = fn();
[    0.237992] Made trace init call stop on fn
[    0.238029] Fn name = init_grace
[    0.238036] fn not black listed. Let's see if that was good choice
[    0.238040] Made trace init call start on fn. Begin call the function
[    0.238054] Function fn called: 0 = fn();
[    0.238060] Made trace init call stop on fn
[    0.238070] Fn name = init_devpts_fs
[    0.238076] fn not black listed. Let's see if that was good choice
[    0.238080] Made trace init call start on fn. Begin call the function
[    0.238115] Function fn called: 0 = fn();
[    0.238123] Made trace init call stop on fn
[    0.238132] Fn name = ext4_init_fs
[    0.238137] fn not black listed. Let's see if that was good choice
[    0.238142] Made trace init call start on fn. Begin call the function
[    0.238945] Function fn called: 0 = fn();
[    0.238958] Made trace init call stop on fn
[    0.238972] Fn name = journal_init
[    0.238978] fn not black listed. Let's see if that was good choice
[    0.238982] Made trace init call start on fn. Begin call the function
[    0.239386] Function fn called: 0 = fn();
[    0.239396] Made trace init call stop on fn
[    0.239407] Fn name = init_squashfs_fs
[    0.239413] fn not black listed. Let's see if that was good choice
[    0.239417] Made trace init call start on fn. Begin call the function
[    0.239534] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.239540] Function fn called: 0 = fn();
[    0.239547] Made trace init call stop on fn
[    0.239555] Fn name = init_fat_fs
[    0.239561] fn not black listed. Let's see if that was good choice
[    0.239565] Made trace init call start on fn. Begin call the function
[    0.239792] Function fn called: 0 = fn();
[    0.239801] Made trace init call stop on fn
[    0.239811] Fn name = init_vfat_fs
[    0.239816] fn not black listed. Let's see if that was good choice
[    0.239820] Made trace init call start on fn. Begin call the function
[    0.239827] Function fn called: 0 = fn();
[    0.239832] Made trace init call stop on fn
[    0.239841] Fn name = init_msdos_fs
[    0.239846] fn not black listed. Let's see if that was good choice
[    0.239850] Made trace init call start on fn. Begin call the function
[    0.239856] Function fn called: 0 = fn();
[    0.239862] Made trace init call stop on fn
[    0.239870] Fn name = init_nfs_fs
[    0.239875] fn not black listed. Let's see if that was good choice
[    0.239879] Made trace init call start on fn. Begin call the function
[    0.247846] Function fn called: 0 = fn();
[    0.247868] Made trace init call stop on fn
[    0.247891] Fn name = init_nfs_v2
[    0.247899] fn not black listed. Let's see if that was good choice
[    0.247904] Made trace init call start on fn. Begin call the function
[    0.247909] Function fn called: 0 = fn();
[    0.247915] Made trace init call stop on fn
[    0.247924] Fn name = init_nfs_v3
[    0.247929] fn not black listed. Let's see if that was good choice
[    0.247933] Made trace init call start on fn. Begin call the function
[    0.247938] Function fn called: 0 = fn();
[    0.247943] Made trace init call stop on fn
[    0.247952] Fn name = init_nfs_v4
[    0.247957] fn not black listed. Let's see if that was good choice
[    0.247961] Made trace init call start on fn. Begin call the function
[    0.247966] NFS: Registering the id_resolver key type
[    0.248051] Key type id_resolver registered
[    0.248060] Key type id_legacy registered
[    0.248217] Function fn called: 0 = fn();
[    0.248227] Made trace init call stop on fn
[    0.248246] Fn name = nfs4filelayout_init
[    0.248252] fn not black listed. Let's see if that was good choice
[    0.248256] Made trace init call start on fn. Begin call the function
[    0.248260] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.248268] Function fn called: 0 = fn();
[    0.248274] Made trace init call stop on fn
[    0.248282] Fn name = nfs4flexfilelayout_init
[    0.248288] fn not black listed. Let's see if that was good choice
[    0.248292] Made trace init call start on fn. Begin call the function
[    0.248296] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.248303] Function fn called: 0 = fn();
[    0.248308] Made trace init call stop on fn
[    0.248316] Fn name = init_nlm
[    0.248321] fn not black listed. Let's see if that was good choice
[    0.248325] Made trace init call start on fn. Begin call the function
[    0.248368] Function fn called: 0 = fn();
[    0.248376] Made trace init call stop on fn
[    0.248386] Fn name = init_nls_cp437
[    0.248391] fn not black listed. Let's see if that was good choice
[    0.248396] Made trace init call start on fn. Begin call the function
[    0.248401] Function fn called: 0 = fn();
[    0.248406] Made trace init call stop on fn
[    0.248415] Fn name = init_nls_iso8859_1
[    0.248420] fn not black listed. Let's see if that was good choice
[    0.248424] Made trace init call start on fn. Begin call the function
[    0.248429] Function fn called: 0 = fn();
[    0.248434] Made trace init call stop on fn
[    0.248443] Fn name = init_nls_utf8
[    0.248448] fn not black listed. Let's see if that was good choice
[    0.248452] Made trace init call start on fn. Begin call the function
[    0.248457] Function fn called: 0 = fn();
[    0.248463] Made trace init call stop on fn
[    0.248471] Fn name = init_sysv_fs
[    0.248476] fn not black listed. Let's see if that was good choice
[    0.248480] Made trace init call start on fn. Begin call the function
[    0.248622] Function fn called: 0 = fn();
[    0.248632] Made trace init call stop on fn
[    0.248642] Fn name = init_ntfs_fs
[    0.248647] fn not black listed. Let's see if that was good choice
[    0.248652] Made trace init call start on fn. Begin call the function
[    0.248656] ntfs: driver 2.1.32 [Flags: R/O].
[    0.248943] Function fn called: 0 = fn();
[    0.248952] Made trace init call stop on fn
[    0.248962] Fn name = init_jffs2_fs
[    0.248968] fn not black listed. Let's see if that was good choice
[    0.248973] Made trace init call start on fn. Begin call the function
[    0.248977] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.249391] Function fn called: 0 = fn();
[    0.249403] Made trace init call stop on fn
[    0.249416] Fn name = init_autofs_fs
[    0.249423] fn not black listed. Let's see if that was good choice
[    0.249427] Made trace init call start on fn. Begin call the function
[    0.249759] Function fn called: 0 = fn();
[    0.249770] Made trace init call stop on fn
[    0.249793] Fn name = fuse_init
[    0.249800] fn not black listed. Let's see if that was good choice
[    0.249804] Made trace init call start on fn. Begin call the function
[    0.249808] fuse: init (API version 7.37)
[    0.250321] Function fn called: 0 = fn();
[    0.250332] Made trace init call stop on fn
[    0.250351] Fn name = ovl_init
[    0.250358] fn not black listed. Let's see if that was good choice
[    0.250362] Made trace init call start on fn. Begin call the function
[    0.250515] Function fn called: 0 = fn();
[    0.250525] Made trace init call stop on fn
[    0.250536] Fn name = efivarfs_init
[    0.250542] fn not black listed. Let's see if that was good choice
[    0.250546] Made trace init call start on fn. Begin call the function
[    0.250551] Function fn called: -19 = fn();
[    0.250557] Made trace init call stop on fn
[    0.250566] Fn name = ipc_init
[    0.250571] fn not black listed. Let's see if that was good choice
[    0.250575] Made trace init call start on fn. Begin call the function
[    0.250676] Function fn called: 0 = fn();
[    0.250684] Made trace init call stop on fn
[    0.250698] Fn name = ipc_sysctl_init
[    0.250703] fn not black listed. Let's see if that was good choice
[    0.250707] Made trace init call start on fn. Begin call the function
[    0.250776] Function fn called: 0 = fn();
[    0.250783] Made trace init call stop on fn
[    0.250794] Fn name = init_mqueue_fs
[    0.250799] fn not black listed. Let's see if that was good choice
[    0.250803] Made trace init call start on fn. Begin call the function
[    0.251047] Function fn called: 0 = fn();
[    0.251058] Made trace init call stop on fn
[    0.251069] Fn name = key_proc_init
[    0.251075] fn not black listed. Let's see if that was good choice
[    0.251079] Made trace init call start on fn. Begin call the function
[    0.251096] Function fn called: 0 = fn();
[    0.251103] Made trace init call stop on fn
[    0.251113] Fn name = af_alg_init
[    0.251118] fn not black listed. Let's see if that was good choice
[    0.251122] Made trace init call start on fn. Begin call the function
[    0.251130] NET: Registered PF_ALG protocol family
[    0.251136] Function fn called: 0 = fn();
[    0.251142] Made trace init call stop on fn
[    0.251151] Fn name = algif_hash_init
[    0.251156] fn not black listed. Let's see if that was good choice
[    0.251160] Made trace init call start on fn. Begin call the function
[    0.251167] Function fn called: 0 = fn();
[    0.251172] Made trace init call stop on fn
[    0.251182] Fn name = asymmetric_key_init
[    0.251187] fn not black listed. Let's see if that was good choice
[    0.251191] Made trace init call start on fn. Begin call the function
[    0.251199] Key type asymmetric registered
[    0.251204] Function fn called: 0 = fn();
[    0.251210] Made trace init call stop on fn
[    0.251219] Fn name = x509_key_init
[    0.251224] fn not black listed. Let's see if that was good choice
[    0.251228] Made trace init call start on fn. Begin call the function
[    0.251234] Asymmetric key parser 'x509' registered
[    0.251240] Function fn called: 0 = fn();
[    0.251245] Made trace init call stop on fn
[    0.251255] Fn name = blkdev_init
[    0.251259] fn not black listed. Let's see if that was good choice
[    0.251263] Made trace init call start on fn. Begin call the function
[    0.251437] Function fn called: 0 = fn();
[    0.251447] Made trace init call stop on fn
[    0.251459] Fn name = proc_genhd_init
[    0.251465] fn not black listed. Let's see if that was good choice
[    0.251469] Made trace init call start on fn. Begin call the function
[    0.251493] Function fn called: 0 = fn();
[    0.251499] Made trace init call stop on fn
[    0.251510] Fn name = init_emergency_pool
[    0.251515] fn not black listed. Let's see if that was good choice
[    0.251519] Made trace init call start on fn. Begin call the function
[    0.251524] Function fn called: 0 = fn();
[    0.251530] Made trace init call stop on fn
[    0.251539] Fn name = bsg_init
[    0.251544] fn not black listed. Let's see if that was good choice
[    0.251548] Made trace init call start on fn. Begin call the function
[    0.251593] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.251603] Function fn called: 0 = fn();
[    0.251609] Made trace init call stop on fn
[    0.251619] Fn name = deadline_init
[    0.251625] fn not black listed. Let's see if that was good choice
[    0.251629] Made trace init call start on fn. Begin call the function
[    0.251636] io scheduler mq-deadline registered
[    0.251641] Function fn called: 0 = fn();
[    0.251646] Made trace init call stop on fn
[    0.251656] Fn name = kyber_init
[    0.251661] fn not black listed. Let's see if that was good choice
[    0.251665] Made trace init call start on fn. Begin call the function
[    0.251671] io scheduler kyber registered
[    0.251676] Function fn called: 0 = fn();
[    0.251681] Made trace init call stop on fn
[    0.251691] Fn name = io_uring_init
[    0.251696] fn not black listed. Let's see if that was good choice
[    0.251700] Made trace init call start on fn. Begin call the function
[    0.251726] Function fn called: 0 = fn();
[    0.251733] Made trace init call stop on fn
[    0.251744] Fn name = blake2s_mod_init
[    0.251749] fn not black listed. Let's see if that was good choice
[    0.251754] Made trace init call start on fn. Begin call the function
[    0.251758] Function fn called: 0 = fn();
[    0.251763] Made trace init call stop on fn
[    0.251775] Fn name = stm32mp_exti_driver_init
[    0.251780] fn not black listed. Let's see if that was good choice
[    0.251784] Made trace init call start on fn. Begin call the function
[    0.252066] Function fn called: 0 = fn();
[    0.252076] Made trace init call stop on fn
[    0.252107] Fn name = brcm_gisb_driver_init
[    0.252115] fn not black listed. Let's see if that was good choice
[    0.252119] Made trace init call start on fn. Begin call the function
[    0.252362] Function fn called: -19 = fn();
[    0.252372] Made trace init call stop on fn
[    0.252386] Fn name = simple_pm_bus_driver_init
[    0.252392] fn not black listed. Let's see if that was good choice
[    0.252396] Made trace init call start on fn. Begin call the function
[    0.257542] Function fn called: 0 = fn();
[    0.257556] Made trace init call stop on fn
[    0.257579] Fn name = vexpress_syscfg_driver_init
[    0.257586] fn not black listed. Let's see if that was good choice
[    0.257591] Made trace init call start on fn. Begin call the function
[    0.257679] Function fn called: 0 = fn();
[    0.257686] Made trace init call stop on fn
[    0.257699] Fn name = phy_core_init
[    0.257705] fn not black listed. Let's see if that was good choice
[    0.257709] Made trace init call start on fn. Begin call the function
[    0.257740] Function fn called: 0 = fn();
[    0.257747] Made trace init call stop on fn
[    0.257759] Fn name = qcom_usb_hs_phy_driver_init
[    0.257766] fn not black listed. Let's see if that was good choice
[    0.257770] Made trace init call start on fn. Begin call the function
[    0.257809] Function fn called: 0 = fn();
[    0.257816] Made trace init call stop on fn
[    0.257828] Fn name = stm32_usbphyc_driver_init
[    0.257834] fn not black listed. Let's see if that was good choice
[    0.257838] Made trace init call start on fn. Begin call the function
[    0.257989] Function fn called: 0 = fn();
[    0.257998] Made trace init call stop on fn
[    0.258012] Fn name = as3722_pinctrl_driver_init
[    0.258018] fn not black listed. Let's see if that was good choice
[    0.258022] Made trace init call start on fn. Begin call the function
[    0.258144] Function fn called: 0 = fn();
[    0.258153] Made trace init call stop on fn
[    0.258166] Fn name = microchip_sgpio_pinctrl_driver_init
[    0.258172] fn not black listed. Let's see if that was good choice
[    0.258176] Made trace init call start on fn. Begin call the function
[    0.258312] Function fn called: 0 = fn();
[    0.258319] Made trace init call stop on fn
[    0.258333] Fn name = ocelot_pinctrl_driver_init
[    0.258339] fn not black listed. Let's see if that was good choice
[    0.258343] Made trace init call start on fn. Begin call the function
[    0.258541] Function fn called: 0 = fn();
[    0.258549] Made trace init call stop on fn
[    0.258561] Fn name = palmas_pinctrl_driver_init
[    0.258568] fn not black listed. Let's see if that was good choice
[    0.258572] Made trace init call start on fn. Begin call the function
[    0.258707] Function fn called: 0 = fn();
[    0.258714] Made trace init call stop on fn
[    0.258726] Fn name = pcs_driver_init
[    0.258732] fn not black listed. Let's see if that was good choice
[    0.258736] Made trace init call start on fn. Begin call the function
[    0.258942] Function fn called: 0 = fn();
[    0.258949] Made trace init call stop on fn
[    0.258961] Fn name = stmfx_pinctrl_driver_init
[    0.258967] fn not black listed. Let's see if that was good choice
[    0.258971] Made trace init call start on fn. Begin call the function
[    0.259075] Function fn called: 0 = fn();
[    0.259083] Made trace init call stop on fn
[    0.259095] Fn name = stm32_hdp_driver_init
[    0.259100] fn not black listed. Let's see if that was good choice
[    0.259105] Made trace init call start on fn. Begin call the function
[    0.259215] Function fn called: 0 = fn();
[    0.259222] Made trace init call stop on fn
[    0.259235] Fn name = bgpio_driver_init
[    0.259240] fn not black listed. Let's see if that was good choice
[    0.259245] Made trace init call start on fn. Begin call the function
[    0.259380] Function fn called: 0 = fn();
[    0.259386] Made trace init call stop on fn
[    0.259399] Fn name = dwapb_gpio_driver_init
[    0.259405] fn not black listed. Let's see if that was good choice
[    0.259409] Made trace init call start on fn. Begin call the function
[    0.259528] Function fn called: 0 = fn();
[    0.259535] Made trace init call stop on fn
[    0.259548] Fn name = pl061_gpio_driver_init
[    0.259553] fn not black listed. Let's see if that was good choice
[    0.259557] Made trace init call start on fn. Begin call the function
[    0.259602] Function fn called: 0 = fn();
[    0.259608] Made trace init call stop on fn
[    0.259642] Fn name = syscon_gpio_driver_init
[    0.259648] fn not black listed. Let's see if that was good choice
[    0.259652] Made trace init call start on fn. Begin call the function
[    0.259797] Function fn called: 0 = fn();
[    0.259805] Made trace init call stop on fn
[    0.259820] Fn name = as3711_backlight_driver_init
[    0.259827] fn not black listed. Let's see if that was good choice
[    0.259831] Made trace init call start on fn. Begin call the function
[    0.259905] Function fn called: 0 = fn();
[    0.259913] Made trace init call stop on fn
[    0.259927] Fn name = gpio_backlight_driver_init
[    0.259934] fn not black listed. Let's see if that was good choice
[    0.259939] Made trace init call start on fn. Begin call the function
[    0.260038] Function fn called: 0 = fn();
[    0.260045] Made trace init call stop on fn
[    0.260059] Fn name = pwm_backlight_driver_init
[    0.260065] fn not black listed. Let's see if that was good choice
[    0.260070] Made trace init call start on fn. Begin call the function
[    0.260178] Function fn called: 0 = fn();
[    0.260186] Made trace init call stop on fn
[    0.260200] Fn name = of_fixed_factor_clk_driver_init
[    0.260206] fn not black listed. Let's see if that was good choice
[    0.260210] Made trace init call start on fn. Begin call the function
[    0.260311] Function fn called: 0 = fn();
[    0.260318] Made trace init call stop on fn
[    0.260331] Fn name = of_fixed_clk_driver_init
[    0.260337] fn not black listed. Let's see if that was good choice
[    0.260341] Made trace init call start on fn. Begin call the function
[    0.260439] Function fn called: 0 = fn();
[    0.260447] Made trace init call stop on fn
[    0.260460] Fn name = gpio_clk_driver_init
[    0.260465] fn not black listed. Let's see if that was good choice
[    0.260469] Made trace init call start on fn. Begin call the function
[    0.260587] Function fn called: 0 = fn();
[    0.260594] Made trace init call stop on fn
[    0.260607] Fn name = max77686_clk_driver_init
[    0.260613] fn not black listed. Let's see if that was good choice
[    0.260617] Made trace init call start on fn. Begin call the function
[    0.260682] Function fn called: 0 = fn();
[    0.260688] Made trace init call stop on fn
[    0.260701] Fn name = scmi_clocks_driver_init
[    0.260707] fn not black listed. Let's see if that was good choice
[    0.260711] Made trace init call start on fn. Begin call the function
[    0.260802] Function fn called: 0 = fn();
[    0.260810] Made trace init call stop on fn
[    0.260826] Fn name = vexpress_osc_driver_init
[    0.260832] fn not black listed. Let's see if that was good choice
[    0.260836] Made trace init call start on fn. Begin call the function
[    0.260946] Function fn called: 0 = fn();
[    0.260953] Made trace init call stop on fn
[    0.260967] Fn name = pl330_driver_init
[    0.260973] fn not black listed. Let's see if that was good choice
[    0.260977] Made trace init call start on fn. Begin call the function
[    0.261020] Function fn called: 0 = fn();
[    0.261027] Made trace init call stop on fn
[    0.261040] Fn name = virtio_mmio_init
[    0.261045] fn not black listed. Let's see if that was good choice
[    0.261050] Made trace init call start on fn. Begin call the function
[    0.261150] Function fn called: 0 = fn();
[    0.261157] Made trace init call stop on fn
[    0.261166] Fn name = protection_driver_init
[    0.261172] fn not black listed. Let's see if that was good choice
[    0.261176] Made trace init call start on fn. Begin call the function
[    0.261279] Function fn called: 0 = fn();
[    0.261286] Made trace init call stop on fn
[    0.261296] Fn name = cpcap_regulator_driver_init
[    0.261302] fn not black listed. Let's see if that was good choice
[    0.261307] Made trace init call start on fn. Begin call the function
[    0.261444] Function fn called: 0 = fn();
[    0.261451] Made trace init call stop on fn
[    0.261461] Fn name = act8865_pmic_driver_init
[    0.261466] fn not black listed. Let's see if that was good choice
[    0.261470] Made trace init call start on fn. Begin call the function
[    0.261531] Function fn called: 0 = fn();
[    0.261538] Made trace init call stop on fn
[    0.261547] Fn name = act8945a_pmic_driver_init
[    0.261553] fn not black listed. Let's see if that was good choice
[    0.261557] Made trace init call start on fn. Begin call the function
[    0.261622] Function fn called: 0 = fn();
[    0.261629] Made trace init call stop on fn
[    0.261650] Fn name = scmi_drv_init
[    0.261657] fn not black listed. Let's see if that was good choice
[    0.261661] Made trace init call start on fn. Begin call the function
[    0.261728] Function fn called: 0 = fn();
[    0.261736] Made trace init call stop on fn
[    0.261746] Fn name = as3722_regulator_driver_init
[    0.261752] fn not black listed. Let's see if that was good choice
[    0.261756] Made trace init call start on fn. Begin call the function
[    0.261866] Function fn called: 0 = fn();
[    0.261873] Made trace init call stop on fn
[    0.261882] Fn name = axp20x_regulator_driver_init
[    0.261889] fn not black listed. Let's see if that was good choice
[    0.261893] Made trace init call start on fn. Begin call the function
[    0.261956] Function fn called: 0 = fn();
[    0.261963] Made trace init call stop on fn
[    0.261972] Fn name = bcm590xx_regulator_driver_init
[    0.261978] fn not black listed. Let's see if that was good choice
[    0.261982] Made trace init call start on fn. Begin call the function
[    0.262042] Function fn called: 0 = fn();
[    0.262050] Made trace init call stop on fn
[    0.262059] Fn name = da9210_regulator_driver_init
[    0.262064] fn not black listed. Let's see if that was good choice
[    0.262069] Made trace init call start on fn. Begin call the function
[    0.262111] Function fn called: 0 = fn();
[    0.262118] Made trace init call stop on fn
[    0.262127] Fn name = fan53555_regulator_driver_init
[    0.262133] fn not black listed. Let's see if that was good choice
[    0.262137] Made trace init call start on fn. Begin call the function
[    0.262177] Function fn called: 0 = fn();
[    0.262184] Made trace init call stop on fn
[    0.262192] Fn name = lp872x_driver_init
[    0.262198] fn not black listed. Let's see if that was good choice
[    0.262202] Made trace init call start on fn. Begin call the function
[    0.262241] Function fn called: 0 = fn();
[    0.262247] Made trace init call stop on fn
[    0.262257] Fn name = max77686_pmic_driver_init
[    0.262262] fn not black listed. Let's see if that was good choice
[    0.262267] Made trace init call start on fn. Begin call the function
[    0.262330] Function fn called: 0 = fn();
[    0.262337] Made trace init call stop on fn
[    0.262347] Fn name = max77802_pmic_driver_init
[    0.262353] fn not black listed. Let's see if that was good choice
[    0.262358] Made trace init call start on fn. Begin call the function
[    0.262420] Function fn called: 0 = fn();
[    0.262427] Made trace init call stop on fn
[    0.262436] Fn name = qcom_spmi_regulator_driver_init
[    0.262442] fn not black listed. Let's see if that was good choice
[    0.262446] Made trace init call start on fn. Begin call the function
[    0.262776] Function fn called: 0 = fn();
[    0.262784] Made trace init call stop on fn
[    0.262794] Fn name = pwm_regulator_driver_init
[    0.262800] fn not black listed. Let's see if that was good choice
[    0.262804] Made trace init call start on fn. Begin call the function
[    0.262919] Function fn called: 0 = fn();
[    0.262927] Made trace init call stop on fn
[    0.262936] Fn name = rk808_regulator_driver_init
[    0.262942] fn not black listed. Let's see if that was good choice
[    0.262947] Made trace init call start on fn. Begin call the function
[    0.263012] Function fn called: 0 = fn();
[    0.263020] Made trace init call stop on fn
[    0.263029] Fn name = rn5t618_regulator_driver_init
[    0.263035] fn not black listed. Let's see if that was good choice
[    0.263039] Made trace init call start on fn. Begin call the function
[    0.263103] Function fn called: 0 = fn();
[    0.263109] Made trace init call stop on fn
[    0.263119] Fn name = s2mps11_pmic_driver_init
[    0.263125] fn not black listed. Let's see if that was good choice
[    0.263130] Made trace init call start on fn. Begin call the function
[    0.263197] Function fn called: 0 = fn();
[    0.263204] Made trace init call stop on fn
[    0.263213] Fn name = s5m8767_pmic_driver_init
[    0.263219] fn not black listed. Let's see if that was good choice
[    0.263223] Made trace init call start on fn. Begin call the function
[    0.263284] Function fn called: 0 = fn();
[    0.263291] Made trace init call stop on fn
[    0.263301] Fn name = stm32_pwr_driver_init
[    0.263306] fn not black listed. Let's see if that was good choice
[    0.263310] Made trace init call start on fn. Begin call the function
[    0.263453] Function fn called: 0 = fn();
[    0.263461] Made trace init call stop on fn
[    0.263485] Fn name = stpmic1_regulator_driver_init
[    0.263491] fn not black listed. Let's see if that was good choice
[    0.263495] Made trace init call start on fn. Begin call the function
[    0.263608] Function fn called: 0 = fn();
[    0.263614] Made trace init call stop on fn
[    0.263625] Fn name = tps65218_regulator_driver_init
[    0.263630] fn not black listed. Let's see if that was good choice
[    0.263635] Made trace init call start on fn. Begin call the function
[    0.263712] Function fn called: 0 = fn();
[    0.263720] Made trace init call stop on fn
[    0.263730] Fn name = vexpress_regulator_driver_init
[    0.263736] fn not black listed. Let's see if that was good choice
[    0.263740] Made trace init call start on fn. Begin call the function
[    0.263843] Function fn called: 0 = fn();
[    0.263851] Made trace init call stop on fn
[    0.263861] Fn name = scmi_reset_driver_init
[    0.263868] fn not black listed. Let's see if that was good choice
[    0.263872] Made trace init call start on fn. Begin call the function
[    0.263940] Function fn called: 0 = fn();
[    0.263948] Made trace init call stop on fn
[    0.263958] Fn name = reset_simple_driver_init
[    0.263965] fn not black listed. Let's see if that was good choice
[    0.263969] Made trace init call start on fn. Begin call the function
[    0.264269] Function fn called: 0 = fn();
[    0.264277] Made trace init call stop on fn
[    0.264287] Fn name = n_null_init
[    0.264293] fn not black listed. Let's see if that was good choice
[    0.264297] Made trace init call start on fn. Begin call the function
[    0.264302] Function fn called: 0 = fn();
[    0.264308] Made trace init call stop on fn
[    0.264316] Fn name = pty_init
[    0.264320] fn not black listed. Let's see if that was good choice
[    0.264324] Made trace init call start on fn. Begin call the function
[    0.290174] Function fn called: 0 = fn();
[    0.290194] Made trace init call stop on fn
[    0.290222] Fn name = sysrq_init
[    0.290229] fn not black listed. Let's see if that was good choice
[    0.290233] Made trace init call start on fn. Begin call the function
[    0.290283] Function fn called: 0 = fn();
[    0.290291] Made trace init call stop on fn
[    0.290301] Fn name = stm32_usart_init
[    0.290307] fn not black listed. Let's see if that was good choice
[    0.290311] Made trace init call start on fn. Begin call the function
[    0.290316] STM32 USART driver initialized
[    0.290666] Function fn called: 0 = fn();
[    0.290676] Made trace init call stop on fn
[    0.290692] Fn name = random_sysctls_init
[    0.290698] fn not black listed. Let's see if that was good choice
[    0.290703] Made trace init call start on fn. Begin call the function
[    0.290737] Function fn called: 0 = fn();
[    0.290745] Made trace init call stop on fn
[    0.290755] Fn name = stm32_rng_driver_init
[    0.290761] fn not black listed. Let's see if that was good choice
[    0.290765] Made trace init call start on fn. Begin call the function
[    0.290985] Function fn called: 0 = fn();
[    0.290994] Made trace init call stop on fn
[    0.291006] Fn name = optee_rng_mod_init
[    0.291011] fn not black listed. Let's see if that was good choice
[    0.291016] Made trace init call start on fn. Begin call the function
[    0.291058] Function fn called: 0 = fn();
[    0.291065] Made trace init call stop on fn
[    0.291076] Fn name = smccc_trng_driver_init
[    0.291083] fn not black listed. Let's see if that was good choice
[    0.291087] Made trace init call start on fn. Begin call the function
[    0.291155] Function fn called: 0 = fn();
[    0.291162] Made trace init call stop on fn
[    0.291172] Fn name = drm_core_init
[    0.291178] fn not black listed. Let's see if that was good choice
[    0.291182] Made trace init call start on fn. Begin call the function
[    0.291261] Function fn called: 0 = fn();
[    0.291272] Made trace init call stop on fn
[    0.291283] Fn name = drm_display_helper_module_init
[    0.291290] fn not black listed. Let's see if that was good choice
[    0.291295] Made trace init call start on fn. Begin call the function
[    0.291299] Function fn called: 0 = fn();
[    0.291305] Made trace init call stop on fn
[    0.291315] Fn name = dw_mipi_dsi_stm_driver_init
[    0.291320] fn not black listed. Let's see if that was good choice
[    0.291325] Made trace init call start on fn. Begin call the function
[    0.291479] Function fn called: 0 = fn();
[    0.291487] Made trace init call stop on fn
[    0.291499] Fn name = stm_drm_platform_driver_init
[    0.291505] fn not black listed. Let's see if that was good choice
[    0.291509] Made trace init call start on fn. Begin call the function
[    0.291679] Function fn called: 0 = fn();
[    0.291687] Made trace init call stop on fn
[    0.291699] Fn name = panel_simple_init
[    0.291705] fn not black listed. Let's see if that was good choice
[    0.291709] Made trace init call start on fn. Begin call the function
[    0.294169] Function fn called: 0 = fn();
[    0.294178] Made trace init call stop on fn
[    0.294189] Fn name = panel_edp_init
[    0.294195] fn not black listed. Let's see if that was good choice
[    0.294200] Made trace init call start on fn. Begin call the function
[    0.294865] Function fn called: 0 = fn();
[    0.294873] Made trace init call stop on fn
[    0.294885] Fn name = rocktech_hx8394_driver_init
[    0.294891] fn not black listed. Let's see if that was good choice
[    0.294895] Made trace init call start on fn. Begin call the function
[    0.294935] Function fn called: 0 = fn();
[    0.294942] Made trace init call stop on fn
[    0.294952] Fn name = orisetech_otm8009a_driver_init
[    0.294958] fn not black listed. Let's see if that was good choice
[    0.294962] Made trace init call start on fn. Begin call the function
[    0.295001] Function fn called: 0 = fn();
[    0.295008] Made trace init call stop on fn
[    0.295018] Fn name = raydium_rm68200_driver_init
[    0.295025] fn not black listed. Let's see if that was good choice
[    0.295029] Made trace init call start on fn. Begin call the function
[    0.295067] Function fn called: 0 = fn();
[    0.295075] Made trace init call stop on fn
[    0.295085] Fn name = display_connector_driver_init
[    0.295091] fn not black listed. Let's see if that was good choice
[    0.295095] Made trace init call start on fn. Begin call the function
[    0.295576] Function fn called: 0 = fn();
[    0.295586] Made trace init call stop on fn
[    0.295620] Fn name = sii902x_driver_init
[    0.295626] fn not black listed. Let's see if that was good choice
[    0.295631] Made trace init call start on fn. Begin call the function
[    0.295687] Function fn called: 0 = fn();
[    0.295694] Made trace init call stop on fn
[    0.295705] Fn name = adv7511_init
[    0.295710] fn not black listed. Let's see if that was good choice
[    0.295714] Made trace init call start on fn. Begin call the function
[    0.295787] Function fn called: 0 = fn();
[    0.295794] Made trace init call stop on fn
[    0.295805] Fn name = simpledrm_platform_driver_init
[    0.295811] fn not black listed. Let's see if that was good choice
[    0.295816] Made trace init call start on fn. Begin call the function
[    0.295947] Function fn called: 0 = fn();
[    0.295955] Made trace init call stop on fn
[    0.295966] Fn name = topology_sysfs_init
[    0.295972] fn not black listed. Let's see if that was good choice
[    0.295976] Made trace init call start on fn. Begin call the function
[    0.296059] Function fn called: 0 = fn();
[    0.296068] Made trace init call stop on fn
[    0.296079] Fn name = cacheinfo_sysfs_init
[    0.296084] fn not black listed. Let's see if that was good choice
[    0.296088] Made trace init call start on fn. Begin call the function
[    0.296095] Function fn called: -2 = fn();
[    0.296101] Made trace init call stop on fn
[    0.296111] Fn name = devcoredump_init
[    0.296116] fn not black listed. Let's see if that was good choice
[    0.296121] Made trace init call start on fn. Begin call the function
[    0.296159] Function fn called: 0 = fn();
[    0.296166] Made trace init call stop on fn
[    0.296179] Fn name = brd_init
[    0.296185] fn not black listed. Let's see if that was good choice
[    0.296189] Made trace init call start on fn. Begin call the function
[    0.352741] brd: module loaded
[    0.352760] Function fn called: 0 = fn();
[    0.352769] Made trace init call stop on fn
[    0.352804] Fn name = loop_init
[    0.352810] fn not black listed. Let's see if that was good choice
[    0.352815] Made trace init call start on fn. Begin call the function
[    0.382588] loop: module loaded
[    0.382606] Function fn called: 0 = fn();
[    0.382615] Made trace init call stop on fn
[    0.382651] Fn name = virtio_blk_init
[    0.382658] fn not black listed. Let's see if that was good choice
[    0.382663] Made trace init call start on fn. Begin call the function
[    0.382747] Function fn called: 0 = fn();
[    0.382756] Made trace init call stop on fn
[    0.382770] Fn name = ad_dpot_i2c_driver_init
[    0.382776] fn not black listed. Let's see if that was good choice
[    0.382780] Made trace init call start on fn. Begin call the function
[    0.382835] Function fn called: 0 = fn();
[    0.382843] Made trace init call stop on fn
[    0.382855] Fn name = ics932s401_driver_init
[    0.382862] fn not black listed. Let's see if that was good choice
[    0.382866] Made trace init call start on fn. Begin call the function
[    0.382906] Function fn called: 0 = fn();
[    0.382913] Made trace init call stop on fn
[    0.382924] Fn name = apds9802als_driver_init
[    0.382931] fn not black listed. Let's see if that was good choice
[    0.382935] Made trace init call start on fn. Begin call the function
[    0.382977] Function fn called: 0 = fn();
[    0.382983] Made trace init call stop on fn
[    0.382995] Fn name = isl29003_driver_init
[    0.383001] fn not black listed. Let's see if that was good choice
[    0.383006] Made trace init call start on fn. Begin call the function
[    0.383060] Function fn called: 0 = fn();
[    0.383067] Made trace init call stop on fn
[    0.383077] Fn name = at24_init
[    0.383083] fn not black listed. Let's see if that was good choice
[    0.383087] Made trace init call start on fn. Begin call the function
[    0.383128] Function fn called: 0 = fn();
[    0.383136] Made trace init call stop on fn
[    0.383148] Fn name = bcm590xx_i2c_driver_init
[    0.383153] fn not black listed. Let's see if that was good choice
[    0.383158] Made trace init call start on fn. Begin call the function
[    0.383198] Function fn called: 0 = fn();
[    0.383205] Made trace init call stop on fn
[    0.383216] Fn name = tps65218_driver_init
[    0.383221] fn not black listed. Let's see if that was good choice
[    0.383225] Made trace init call start on fn. Begin call the function
[    0.383265] Function fn called: 0 = fn();
[    0.383271] Made trace init call stop on fn
[    0.383282] Fn name = twl_driver_init
[    0.383287] fn not black listed. Let's see if that was good choice
[    0.383292] Made trace init call start on fn. Begin call the function
[    0.383330] Function fn called: 0 = fn();
[    0.383337] Made trace init call stop on fn
[    0.383348] Fn name = twl4030_power_driver_init
[    0.383355] fn not black listed. Let's see if that was good choice
[    0.383359] Made trace init call start on fn. Begin call the function
[    0.383686] Function fn called: 0 = fn();
[    0.383695] Made trace init call stop on fn
[    0.383708] Fn name = cpcap_driver_init
[    0.383714] fn not black listed. Let's see if that was good choice
[    0.383718] Made trace init call start on fn. Begin call the function
[    0.383764] Function fn called: 0 = fn();
[    0.383772] Made trace init call stop on fn
[    0.383784] Fn name = axp20x_i2c_driver_init
[    0.383789] fn not black listed. Let's see if that was good choice
[    0.383793] Made trace init call start on fn. Begin call the function
[    0.383839] Function fn called: 0 = fn();
[    0.383846] Made trace init call stop on fn
[    0.383857] Fn name = max14577_i2c_init
[    0.383863] fn not black listed. Let's see if that was good choice
[    0.383867] Made trace init call start on fn. Begin call the function
[    0.383908] Function fn called: 0 = fn();
[    0.383916] Made trace init call stop on fn
[    0.383928] Fn name = max77686_i2c_driver_init
[    0.383934] fn not black listed. Let's see if that was good choice
[    0.383939] Made trace init call start on fn. Begin call the function
[    0.383980] Function fn called: 0 = fn();
[    0.383988] Made trace init call stop on fn
[    0.384000] Fn name = ssbi_driver_init
[    0.384005] fn not black listed. Let's see if that was good choice
[    0.384010] Made trace init call start on fn. Begin call the function
[    0.384133] Function fn called: 0 = fn();
[    0.384141] Made trace init call stop on fn
[    0.384154] Fn name = atmel_flexcom_driver_init
[    0.384159] fn not black listed. Let's see if that was good choice
[    0.384163] Made trace init call start on fn. Begin call the function
[    0.384271] Function fn called: 0 = fn();
[    0.384279] Made trace init call stop on fn
[    0.384306] Fn name = rk808_i2c_driver_init
[    0.384312] fn not black listed. Let's see if that was good choice
[    0.384316] Made trace init call start on fn. Begin call the function
[    0.384379] Function fn called: 0 = fn();
[    0.384386] Made trace init call stop on fn
[    0.384398] Fn name = rn5t618_i2c_driver_init
[    0.384404] fn not black listed. Let's see if that was good choice
[    0.384408] Made trace init call start on fn. Begin call the function
[    0.384451] Function fn called: 0 = fn();
[    0.384458] Made trace init call stop on fn
[    0.384471] Fn name = sec_pmic_driver_init
[    0.384477] fn not black listed. Let's see if that was good choice
[    0.384481] Made trace init call start on fn. Begin call the function
[    0.384521] Function fn called: 0 = fn();
[    0.384528] Made trace init call stop on fn
[    0.384540] Fn name = vexpress_sysreg_driver_init
[    0.384546] fn not black listed. Let's see if that was good choice
[    0.384550] Made trace init call start on fn. Begin call the function
[    0.384663] Function fn called: 0 = fn();
[    0.384670] Made trace init call stop on fn
[    0.384684] Fn name = as3722_i2c_driver_init
[    0.384691] fn not black listed. Let's see if that was good choice
[    0.384695] Made trace init call start on fn. Begin call the function
[    0.384739] Function fn called: 0 = fn();
[    0.384746] Made trace init call stop on fn
[    0.384759] Fn name = stpmic1_driver_init
[    0.384764] fn not black listed. Let's see if that was good choice
[    0.384768] Made trace init call start on fn. Begin call the function
[    0.384809] Function fn called: 0 = fn();
[    0.384816] Made trace init call stop on fn
[    0.384828] Fn name = stmfx_driver_init
[    0.384834] fn not black listed. Let's see if that was good choice
[    0.384839] Made trace init call start on fn. Begin call the function
[    0.384880] Function fn called: 0 = fn();
[    0.384887] Made trace init call stop on fn
[    0.384899] Fn name = init_sd
[    0.384905] fn not black listed. Let's see if that was good choice
[    0.384909] Made trace init call start on fn. Begin call the function
[    0.385031] Function fn called: 0 = fn();
[    0.385039] Made trace init call stop on fn
[    0.385052] Fn name = init_sr
[    0.385057] fn not black listed. Let's see if that was good choice
[    0.385061] Made trace init call start on fn. Begin call the function
[    0.385100] Function fn called: 0 = fn();
[    0.385107] Made trace init call stop on fn
[    0.385118] Fn name = init_sg
[    0.385124] fn not black listed. Let's see if that was good choice
[    0.385129] Made trace init call start on fn. Begin call the function
[    0.385201] Function fn called: 0 = fn();
[    0.385210] Made trace init call stop on fn
[    0.385223] Fn name = ahci_driver_init
[    0.385229] fn not black listed. Let's see if that was good choice
[    0.385233] Made trace init call start on fn. Begin call the function
[    0.385413] Function fn called: 0 = fn();
[    0.385421] Made trace init call stop on fn
[    0.385434] Fn name = init_mtd
[    0.385440] fn not black listed. Let's see if that was good choice
[    0.385444] Made trace init call start on fn. Begin call the function
[    0.385687] Function fn called: 0 = fn();
[    0.385700] Made trace init call stop on fn
[    0.385715] Fn name = cmdline_parser_init
[    0.385721] fn not black listed. Let's see if that was good choice
[    0.385725] Made trace init call start on fn. Begin call the function
[    0.385730] Function fn called: 0 = fn();
[    0.385736] Made trace init call stop on fn
[    0.385747] Fn name = ofpart_parser_init
[    0.385752] fn not black listed. Let's see if that was good choice
[    0.385756] Made trace init call start on fn. Begin call the function
[    0.385761] Function fn called: 0 = fn();
[    0.385766] Made trace init call stop on fn
[    0.385777] Fn name = mtdblock_tr_init
[    0.385782] fn not black listed. Let's see if that was good choice
[    0.385787] Made trace init call start on fn. Begin call the function
[    0.385799] Function fn called: 0 = fn();
[    0.385805] Made trace init call stop on fn
[    0.385816] Fn name = cfi_probe_init
[    0.385821] fn not black listed. Let's see if that was good choice
[    0.385825] Made trace init call start on fn. Begin call the function
[    0.385830] Function fn called: 0 = fn();
[    0.385835] Made trace init call stop on fn
[    0.385859] Fn name = physmap_init
[    0.385864] fn not black listed. Let's see if that was good choice
[    0.385869] Made trace init call start on fn. Begin call the function
[    0.386086] Function fn called: 0 = fn();
[    0.386094] Made trace init call stop on fn
[    0.386108] Fn name = denali_dt_driver_init
[    0.386113] fn not black listed. Let's see if that was good choice
[    0.386118] Made trace init call start on fn. Begin call the function
[    0.386271] Function fn called: 0 = fn();
[    0.386279] Made trace init call stop on fn
[    0.386292] Fn name = iproc_nand_driver_init
[    0.386298] fn not black listed. Let's see if that was good choice
[    0.386302] Made trace init call start on fn. Begin call the function
[    0.386407] Function fn called: 0 = fn();
[    0.386414] Made trace init call stop on fn
[    0.386427] Fn name = bcm63138_nand_driver_init
[    0.386433] fn not black listed. Let's see if that was good choice
[    0.386438] Made trace init call start on fn. Begin call the function
[    0.386542] Function fn called: 0 = fn();
[    0.386549] Made trace init call stop on fn
[    0.386563] Fn name = brcmstb_nand_driver_init
[    0.386569] fn not black listed. Let's see if that was good choice
[    0.386573] Made trace init call start on fn. Begin call the function
[    0.386675] Function fn called: 0 = fn();
[    0.386683] Made trace init call stop on fn
[    0.386697] Fn name = stm32_fmc2_nfc_driver_init
[    0.386704] fn not black listed. Let's see if that was good choice
[    0.386708] Made trace init call start on fn. Begin call the function
[    0.386881] Function fn called: 0 = fn();
[    0.386889] Made trace init call stop on fn
[    0.386901] Fn name = spinand_drv_init
[    0.386906] fn not black listed. Let's see if that was good choice
[    0.386911] Made trace init call start on fn. Begin call the function
[    0.397075] Function fn called: 0 = fn();
[    0.397089] Made trace init call stop on fn
[    0.397107] Fn name = spi_nor_module_init
[    0.397114] fn not black listed. Let's see if that was good choice
[    0.397118] Made trace init call start on fn. Begin call the function
[    0.397168] Function fn called: 0 = fn();
[    0.397175] Made trace init call stop on fn
[    0.397187] Fn name = spidev_init
[    0.397192] fn not black listed. Let's see if that was good choice
[    0.397196] Made trace init call start on fn. Begin call the function
[    0.397291] Function fn called: 0 = fn();
[    0.397300] Made trace init call stop on fn
[    0.397314] Fn name = cdns_spi_driver_init
[    0.397320] fn not black listed. Let's see if that was good choice
[    0.397324] Made trace init call start on fn. Begin call the function
[    0.397491] Function fn called: 0 = fn();
[    0.397500] Made trace init call stop on fn
[    0.397515] Fn name = stm32_qspi_driver_init
[    0.397521] fn not black listed. Let's see if that was good choice
[    0.397525] Made trace init call start on fn. Begin call the function
[    0.397654] Function fn called: 0 = fn();
[    0.397662] Made trace init call stop on fn
[    0.397675] Fn name = xilinx_spi_driver_init
[    0.397682] fn not black listed. Let's see if that was good choice
[    0.397686] Made trace init call start on fn. Begin call the function
[    0.397829] Function fn called: 0 = fn();
[    0.397836] Made trace init call stop on fn
[    0.397850] Fn name = blackhole_netdev_init
[    0.397856] fn not black listed. Let's see if that was good choice
[    0.397860] Made trace init call start on fn. Begin call the function
[    0.397890] Function fn called: 0 = fn();
[    0.397898] Made trace init call stop on fn
[    0.397909] Fn name = phylink_init
[    0.397915] fn not black listed. Let's see if that was good choice
[    0.397919] Made trace init call start on fn. Begin call the function
[    0.397924] Function fn called: 0 = fn();
[    0.397929] Made trace init call stop on fn
[    0.397940] Fn name = phy_module_init
[    0.397946] fn not black listed. Let's see if that was good choice
[    0.397950] Made trace init call start on fn. Begin call the function
[    0.398306] Function fn called: 0 = fn();
[    0.398314] Made trace init call stop on fn
[    0.398327] Fn name = phy_module_init
[    0.398333] fn not black listed. Let's see if that was good choice
[    0.398338] Made trace init call start on fn. Begin call the function
[    0.398440] Function fn called: 0 = fn();
[    0.398447] Made trace init call stop on fn
[    0.398481] Fn name = phy_module_init
[    0.398487] fn not black listed. Let's see if that was good choice
[    0.398491] Made trace init call start on fn. Begin call the function
[    0.399174] Function fn called: 0 = fn();
[    0.399184] Made trace init call stop on fn
[    0.399197] Fn name = phy_module_init
[    0.399203] fn not black listed. Let's see if that was good choice
[    0.399207] Made trace init call start on fn. Begin call the function
[    0.399247] Function fn called: 0 = fn();
[    0.399254] Made trace init call stop on fn
[    0.399267] Fn name = fixed_mdio_bus_init
[    0.399272] fn not black listed. Let's see if that was good choice
[    0.399276] Made trace init call start on fn. Begin call the function
[    0.400077] Function fn called: 0 = fn();
[    0.400087] Made trace init call stop on fn
[    0.400104] Fn name = phy_module_init
[    0.400111] fn not black listed. Let's see if that was good choice
[    0.400115] Made trace init call start on fn. Begin call the function
[    0.400285] Function fn called: 0 = fn();
[    0.400294] Made trace init call stop on fn
[    0.400308] Fn name = phy_module_init
[    0.400315] fn not black listed. Let's see if that was good choice
[    0.400319] Made trace init call start on fn. Begin call the function
[    0.401021] Function fn called: 0 = fn();
[    0.401030] Made trace init call stop on fn
[    0.401044] Fn name = phy_module_init
[    0.401051] fn not black listed. Let's see if that was good choice
[    0.401055] Made trace init call start on fn. Begin call the function
[    0.401704] Function fn called: 0 = fn();
[    0.401712] Made trace init call stop on fn
[    0.401726] Fn name = phy_module_init
[    0.401732] fn not black listed. Let's see if that was good choice
[    0.401736] Made trace init call start on fn. Begin call the function
[    0.402485] Function fn called: 0 = fn();
[    0.402495] Made trace init call stop on fn
[    0.402510] Fn name = phy_module_init
[    0.402516] fn not black listed. Let's see if that was good choice
[    0.402521] Made trace init call start on fn. Begin call the function
[    0.402567] Function fn called: 0 = fn();
[    0.402575] Made trace init call stop on fn
[    0.402588] Fn name = phy_module_init
[    0.402594] fn not black listed. Let's see if that was good choice
[    0.402598] Made trace init call start on fn. Begin call the function
[    0.402853] Function fn called: 0 = fn();
[    0.402861] Made trace init call stop on fn
[    0.402876] Fn name = virtio_net_driver_init
[    0.402882] fn not black listed. Let's see if that was good choice
[    0.402886] Made trace init call start on fn. Begin call the function
[    0.402933] Function fn called: 0 = fn();
[    0.402940] Made trace init call stop on fn
[    0.402952] Fn name = can_dev_init
[    0.402958] fn not black listed. Let's see if that was good choice
[    0.402962] Made trace init call start on fn. Begin call the function
[    0.402969] CAN device driver interface
[    0.402974] Function fn called: 0 = fn();
[    0.402979] Made trace init call stop on fn
[    0.402991] Fn name = m_can_plat_driver_init
[    0.402997] fn not black listed. Let's see if that was good choice
[    0.403001] Made trace init call start on fn. Begin call the function
[    0.403171] Function fn called: 0 = fn();
[    0.403180] Made trace init call stop on fn
[    0.403195] Fn name = macb_driver_init
[    0.403202] fn not black listed. Let's see if that was good choice
[    0.403206] Made trace init call start on fn. Begin call the function
[    0.403706] Function fn called: 0 = fn();
[    0.403715] Made trace init call stop on fn
[    0.403730] Fn name = hix5hd2_dev_driver_init
[    0.403737] fn not black listed. Let's see if that was good choice
[    0.403741] Made trace init call start on fn. Begin call the function
[    0.403930] Function fn called: 0 = fn();
[    0.403938] Made trace init call stop on fn
[    0.403952] Fn name = orion_mdio_driver_init
[    0.403958] fn not black listed. Let's see if that was good choice
[    0.403962] Made trace init call start on fn. Begin call the function
[    0.404089] Function fn called: 0 = fn();
[    0.404096] Made trace init call stop on fn
[    0.404110] Fn name = ks8851_driver_init
[    0.404115] fn not black listed. Let's see if that was good choice
[    0.404119] Made trace init call start on fn. Begin call the function
[    0.404162] Function fn called: 0 = fn();
[    0.404169] Made trace init call stop on fn
[    0.404203] Fn name = smsc911x_init_module
[    0.404209] fn not black listed. Let's see if that was good choice
[    0.404213] Made trace init call start on fn. Begin call the function
[    0.404342] Function fn called: 0 = fn();
[    0.404349] Made trace init call stop on fn
[    0.404364] Fn name = stmmac_init
[    0.404369] fn not black listed. Let's see if that was good choice
[    0.404373] Made trace init call start on fn. Begin call the function
[    0.404448] Function fn called: 0 = fn();
[    0.404457] Made trace init call stop on fn
[    0.404471] Fn name = stm32_dwmac_driver_init
[    0.404477] fn not black listed. Let's see if that was good choice
[    0.404481] Made trace init call start on fn. Begin call the function
[    0.404743] Function fn called: 0 = fn();
[    0.404752] Made trace init call stop on fn
[    0.404769] Fn name = dwc_eth_dwmac_driver_init
[    0.404775] fn not black listed. Let's see if that was good choice
[    0.404779] Made trace init call start on fn. Begin call the function
[    0.404914] Function fn called: 0 = fn();
[    0.404922] Made trace init call stop on fn
[    0.404936] Fn name = dwmac_generic_driver_init
[    0.404942] fn not black listed. Let's see if that was good choice
[    0.404946] Made trace init call start on fn. Begin call the function
[    0.405256] Function fn called: 0 = fn();
[    0.405264] Made trace init call stop on fn
[    0.405278] Fn name = xemaclite_of_driver_init
[    0.405283] fn not black listed. Let's see if that was good choice
[    0.405288] Made trace init call start on fn. Begin call the function
[    0.405481] Function fn called: 0 = fn();
[    0.405489] Made trace init call stop on fn
[    0.405502] Fn name = pegasus_init
[    0.405508] fn not black listed. Let's see if that was good choice
[    0.405512] Made trace init call start on fn. Begin call the function
[    0.405516] pegasus: Pegasus/Pegasus II USB Ethernet driver
[    0.405593] usbcore: registered new interface driver pegasus
[    0.405602] Function fn called: 0 = fn();
[    0.405609] Made trace init call stop on fn
[    0.405623] Fn name = asix_driver_init
[    0.405629] fn not black listed. Let's see if that was good choice
[    0.405633] Made trace init call start on fn. Begin call the function
[    0.405715] usbcore: registered new interface driver asix
[    0.405723] Function fn called: 0 = fn();
[    0.405729] Made trace init call stop on fn
[    0.405743] Fn name = ax88179_178a_driver_init
[    0.405748] fn not black listed. Let's see if that was good choice
[    0.405752] Made trace init call start on fn. Begin call the function
[    0.405809] usbcore: registered new interface driver ax88179_178a
[    0.405818] Function fn called: 0 = fn();
[    0.405825] Made trace init call stop on fn
[    0.405838] Fn name = cdc_driver_init
[    0.405844] fn not black listed. Let's see if that was good choice
[    0.405849] Made trace init call start on fn. Begin call the function
[    0.405899] usbcore: registered new interface driver cdc_ether
[    0.405907] Function fn called: 0 = fn();
[    0.405914] Made trace init call stop on fn
[    0.405928] Fn name = smsc75xx_driver_init
[    0.405934] fn not black listed. Let's see if that was good choice
[    0.405938] Made trace init call start on fn. Begin call the function
[    0.406006] usbcore: registered new interface driver smsc75xx
[    0.406015] Function fn called: 0 = fn();
[    0.406021] Made trace init call stop on fn
[    0.406034] Fn name = smsc95xx_driver_init
[    0.406039] fn not black listed. Let's see if that was good choice
[    0.406044] Made trace init call start on fn. Begin call the function
[    0.406110] usbcore: registered new interface driver smsc95xx
[    0.406118] Function fn called: 0 = fn();
[    0.406125] Made trace init call stop on fn
[    0.406138] Fn name = net1080_driver_init
[    0.406144] fn not black listed. Let's see if that was good choice
[    0.406149] Made trace init call start on fn. Begin call the function
[    0.406199] usbcore: registered new interface driver net1080
[    0.406207] Function fn called: 0 = fn();
[    0.406213] Made trace init call stop on fn
[    0.406226] Fn name = cdc_subset_driver_init
[    0.406232] fn not black listed. Let's see if that was good choice
[    0.406236] Made trace init call start on fn. Begin call the function
[    0.406286] usbcore: registered new interface driver cdc_subset
[    0.406295] Function fn called: 0 = fn();
[    0.406301] Made trace init call stop on fn
[    0.406314] Fn name = zaurus_driver_init
[    0.406319] fn not black listed. Let's see if that was good choice
[    0.406323] Made trace init call start on fn. Begin call the function
[    0.406383] usbcore: registered new interface driver zaurus
[    0.406391] Function fn called: 0 = fn();
[    0.406397] Made trace init call stop on fn
[    0.406409] Fn name = usbnet_init
[    0.406414] fn not black listed. Let's see if that was good choice
[    0.406418] Made trace init call start on fn. Begin call the function
[    0.406467] Function fn called: 0 = fn();
[    0.406474] Made trace init call stop on fn
[    0.406490] Fn name = cdc_ncm_driver_init
[    0.406495] fn not black listed. Let's see if that was good choice
[    0.406499] Made trace init call start on fn. Begin call the function
[    0.406574] usbcore: registered new interface driver cdc_ncm
[    0.406582] Function fn called: 0 = fn();
[    0.406588] Made trace init call stop on fn
[    0.406601] Fn name = net_failover_init
[    0.406606] fn not black listed. Let's see if that was good choice
[    0.406610] Made trace init call start on fn. Begin call the function
[    0.406615] Function fn called: 0 = fn();
[    0.406620] Made trace init call stop on fn
[    0.406631] Fn name = cdrom_init
[    0.406636] fn not black listed. Let's see if that was good choice
[    0.406640] Made trace init call start on fn. Begin call the function
[    0.406669] Function fn called: 0 = fn();
[    0.406675] Made trace init call stop on fn
[    0.406688] Fn name = usb_conn_driver_init
[    0.406693] fn not black listed. Let's see if that was good choice
[    0.406698] Made trace init call start on fn. Begin call the function
[    0.406833] Function fn called: 0 = fn();
[    0.406841] Made trace init call stop on fn
[    0.406851] Fn name = gpio_vbus_driver_init
[    0.406857] fn not black listed. Let's see if that was good choice
[    0.406861] Made trace init call start on fn. Begin call the function
[    0.427076] Function fn called: 0 = fn();
[    0.427098] Made trace init call stop on fn
[    0.427119] Fn name = isp1301_driver_init
[    0.427128] fn not black listed. Let's see if that was good choice
[    0.427133] Made trace init call start on fn. Begin call the function
[    0.427241] Function fn called: 0 = fn();
[    0.427249] Made trace init call stop on fn
[    0.427261] Fn name = dwc2_platform_driver_init
[    0.427267] fn not black listed. Let's see if that was good choice
[    0.427272] Made trace init call start on fn. Begin call the function
[    0.428032] Function fn called: 0 = fn();
[    0.428042] Made trace init call stop on fn
[    0.428054] Fn name = isp1760_init
[    0.428060] fn not black listed. Let's see if that was good choice
[    0.428065] Made trace init call start on fn. Begin call the function
[    0.428296] Function fn called: 0 = fn();
[    0.428304] Made trace init call stop on fn
[    0.428317] Fn name = ehci_hcd_init
[    0.428322] fn not black listed. Let's see if that was good choice
[    0.428326] Made trace init call start on fn. Begin call the function
[    0.428368] Function fn called: 0 = fn();
[    0.428375] Made trace init call stop on fn
[    0.428384] Fn name = ehci_platform_init
[    0.428389] fn not black listed. Let's see if that was good choice
[    0.428393] Made trace init call start on fn. Begin call the function
[    0.437348] Function fn called: 0 = fn();
[    0.437371] Made trace init call stop on fn
[    0.437393] Fn name = ohci_hcd_mod_init
[    0.437399] fn not black listed. Let's see if that was good choice
[    0.437405] Made trace init call start on fn. Begin call the function
[    0.437443] Function fn called: 0 = fn();
[    0.437450] Made trace init call stop on fn
[    0.437459] Fn name = ohci_platform_init
[    0.437465] fn not black listed. Let's see if that was good choice
[    0.437469] Made trace init call start on fn. Begin call the function
[    0.437726] Function fn called: 0 = fn();
[    0.437737] Made trace init call stop on fn
[    0.437748] Fn name = xhci_hcd_init
[    0.437755] fn not black listed. Let's see if that was good choice
[    0.437759] Made trace init call start on fn. Begin call the function
[    0.437782] Function fn called: 0 = fn();
[    0.437789] Made trace init call stop on fn
[    0.437798] Fn name = xhci_plat_init
[    0.437803] fn not black listed. Let's see if that was good choice
[    0.437807] Made trace init call start on fn. Begin call the function
[    0.438189] Function fn called: 0 = fn();
[    0.438198] Made trace init call stop on fn
[    0.438210] Fn name = usb_storage_driver_init
[    0.438216] fn not black listed. Let's see if that was good choice
[    0.438221] Made trace init call start on fn. Begin call the function
[    0.438326] usbcore: registered new interface driver usb-storage
[    0.438336] Function fn called: 0 = fn();
[    0.438343] Made trace init call stop on fn
[    0.438354] Fn name = usb3503_init
[    0.438360] fn not black listed. Let's see if that was good choice
[    0.438364] Made trace init call start on fn. Begin call the function
[    0.438565] Function fn called: 0 = fn();
[    0.438573] Made trace init call stop on fn
[    0.438585] Fn name = onboard_hub_init
[    0.438592] fn not black listed. Let's see if that was good choice
[    0.438596] Made trace init call start on fn. Begin call the function
[    0.438640] usbcore: registered new device driver onboard-usb-hub
[    0.438952] Function fn called: 0 = fn();
[    0.438960] Made trace init call stop on fn
[    0.438971] Fn name = ci_hdrc_platform_register
[    0.438977] fn not black listed. Let's see if that was good choice
[    0.438982] Made trace init call start on fn. Begin call the function
[    0.439054] Function fn called: 0 = fn();
[    0.439061] Made trace init call stop on fn
[    0.439072] Fn name = ci_hdrc_usb2_driver_init
[    0.439078] fn not black listed. Let's see if that was good choice
[    0.439082] Made trace init call start on fn. Begin call the function
[    0.439224] Function fn called: 0 = fn();
[    0.439231] Made trace init call stop on fn
[    0.439240] Fn name = ci_hdrc_msm_driver_init
[    0.439245] fn not black listed. Let's see if that was good choice
[    0.439249] Made trace init call start on fn. Begin call the function
[    0.439356] Function fn called: 0 = fn();
[    0.439363] Made trace init call stop on fn
[    0.439373] Fn name = ci_hdrc_imx_driver_init
[    0.439379] fn not black listed. Let's see if that was good choice
[    0.439383] Made trace init call start on fn. Begin call the function
[    0.439664] Function fn called: 0 = fn();
[    0.439672] Made trace init call stop on fn
[    0.439682] Fn name = usbmisc_imx_driver_init
[    0.439688] fn not black listed. Let's see if that was good choice
[    0.439692] Made trace init call start on fn. Begin call the function
[    0.439985] Function fn called: 0 = fn();
[    0.439993] Made trace init call stop on fn
[    0.440002] Fn name = tegra_usb_driver_init
[    0.440007] fn not black listed. Let's see if that was good choice
[    0.440012] Made trace init call start on fn. Begin call the function
[    0.440211] Function fn called: 0 = fn();
[    0.440218] Made trace init call stop on fn
[    0.440227] Fn name = udc_plat_driver_init
[    0.440233] fn not black listed. Let's see if that was good choice
[    0.440237] Made trace init call start on fn. Begin call the function
[    0.440383] Function fn called: 0 = fn();
[    0.440391] Made trace init call stop on fn
[    0.440400] Fn name = bdc_driver_init
[    0.440406] fn not black listed. Let's see if that was good choice
[    0.440410] Made trace init call start on fn. Begin call the function
[    0.440534] Function fn called: 0 = fn();
[    0.440541] Made trace init call stop on fn
[    0.440578] Fn name = serport_init
[    0.440585] fn not black listed. Let's see if that was good choice
[    0.440590] Made trace init call start on fn. Begin call the function
[    0.440595] Function fn called: 0 = fn();
[    0.440600] Made trace init call stop on fn
[    0.440608] Fn name = ambakmi_driver_init
[    0.440614] fn not black listed. Let's see if that was good choice
[    0.440618] Made trace init call start on fn. Begin call the function
[    0.440667] Function fn called: 0 = fn();
[    0.440674] Made trace init call stop on fn
[    0.440684] Fn name = input_leds_init
[    0.440689] fn not black listed. Let's see if that was good choice
[    0.440693] Made trace init call start on fn. Begin call the function
[    0.440700] Function fn called: 0 = fn();
[    0.440706] Made trace init call stop on fn
[    0.440713] Fn name = joydev_init
[    0.440718] fn not black listed. Let's see if that was good choice
[    0.440722] Made trace init call start on fn. Begin call the function
[    0.440727] Function fn called: 0 = fn();
[    0.440732] Made trace init call stop on fn
[    0.440740] Fn name = evdev_init
[    0.440745] fn not black listed. Let's see if that was good choice
[    0.440749] Made trace init call start on fn. Begin call the function
[    0.440753] Function fn called: 0 = fn();
[    0.440759] Made trace init call stop on fn
[    0.440766] Fn name = atkbd_init
[    0.440771] fn not black listed. Let's see if that was good choice
[    0.440775] Made trace init call start on fn. Begin call the function
[    0.441028] Function fn called: 0 = fn();
[    0.441040] Made trace init call stop on fn
[    0.441052] Fn name = bcm_kp_device_driver_init
[    0.441059] fn not black listed. Let's see if that was good choice
[    0.441063] Made trace init call start on fn. Begin call the function
[    0.441211] Function fn called: 0 = fn();
[    0.441220] Made trace init call stop on fn
[    0.441232] Fn name = elan_driver_init
[    0.441238] fn not black listed. Let's see if that was good choice
[    0.441242] Made trace init call start on fn. Begin call the function
[    0.441298] Function fn called: 0 = fn();
[    0.441305] Made trace init call stop on fn
[    0.441315] Fn name = psmouse_init
[    0.441320] fn not black listed. Let's see if that was good choice
[    0.441325] Made trace init call start on fn. Begin call the function
[    0.441494] Function fn called: 0 = fn();
[    0.441506] Made trace init call stop on fn
[    0.441519] Fn name = edt_ft5x06_ts_driver_init
[    0.441525] fn not black listed. Let's see if that was good choice
[    0.441530] Made trace init call start on fn. Begin call the function
[    0.441579] Function fn called: 0 = fn();
[    0.441586] Made trace init call stop on fn
[    0.441596] Fn name = goodix_ts_driver_init
[    0.441602] fn not black listed. Let's see if that was good choice
[    0.441606] Made trace init call start on fn. Begin call the function
[    0.441667] Function fn called: 0 = fn();
[    0.441675] Made trace init call stop on fn
[    0.441684] Fn name = stmpe_ts_driver_init
[    0.441689] fn not black listed. Let's see if that was good choice
[    0.441694] Made trace init call start on fn. Begin call the function
[    0.441784] Function fn called: 0 = fn();
[    0.441792] Made trace init call stop on fn
[    0.441802] Fn name = stpmic1_onkey_driver_init
[    0.441808] fn not black listed. Let's see if that was good choice
[    0.441812] Made trace init call start on fn. Begin call the function
[    0.441938] Function fn called: 0 = fn();
[    0.441946] Made trace init call stop on fn
[    0.441958] Fn name = as3722_rtc_driver_init
[    0.441964] fn not black listed. Let's see if that was good choice
[    0.441968] Made trace init call start on fn. Begin call the function
[    0.442053] Function fn called: 0 = fn();
[    0.442062] Made trace init call stop on fn
[    0.442072] Fn name = ds1307_driver_init
[    0.442077] fn not black listed. Let's see if that was good choice
[    0.442082] Made trace init call start on fn. Begin call the function
[    0.442129] Function fn called: 0 = fn();
[    0.442136] Made trace init call stop on fn
[    0.442146] Fn name = em3027_driver_init
[    0.442151] fn not black listed. Let's see if that was good choice
[    0.442156] Made trace init call start on fn. Begin call the function
[    0.442198] Function fn called: 0 = fn();
[    0.442206] Made trace init call stop on fn
[    0.442234] Fn name = max77686_rtc_driver_init
[    0.442241] fn not black listed. Let's see if that was good choice
[    0.442245] Made trace init call start on fn. Begin call the function
[    0.442329] Function fn called: 0 = fn();
[    0.442336] Made trace init call stop on fn
[    0.442348] Fn name = max8907_rtc_driver_init
[    0.442353] fn not black listed. Let's see if that was good choice
[    0.442357] Made trace init call start on fn. Begin call the function
[    0.442427] Function fn called: 0 = fn();
[    0.442433] Made trace init call stop on fn
[    0.442443] Fn name = palmas_rtc_driver_init
[    0.442449] fn not black listed. Let's see if that was good choice
[    0.442453] Made trace init call start on fn. Begin call the function
[    0.442566] Function fn called: 0 = fn();
[    0.442574] Made trace init call stop on fn
[    0.442584] Fn name = pl031_driver_init
[    0.442589] fn not black listed. Let's see if that was good choice
[    0.442593] Made trace init call start on fn. Begin call the function
[    0.442638] Function fn called: 0 = fn();
[    0.442645] Made trace init call stop on fn
[    0.442654] Fn name = stm32_rtc_driver_init
[    0.442660] fn not black listed. Let's see if that was good choice
[    0.442664] Made trace init call start on fn. Begin call the function
[    0.442903] Function fn called: 0 = fn();
[    0.442910] Made trace init call stop on fn
[    0.442922] Fn name = tps6586x_rtc_driver_init
[    0.442928] fn not black listed. Let's see if that was good choice
[    0.442932] Made trace init call start on fn. Begin call the function
[    0.443006] Function fn called: 0 = fn();
[    0.443013] Made trace init call stop on fn
[    0.443023] Fn name = tps65910_rtc_driver_init
[    0.443029] fn not black listed. Let's see if that was good choice
[    0.443033] Made trace init call start on fn. Begin call the function
[    0.443116] Function fn called: 0 = fn();
[    0.443124] Made trace init call stop on fn
[    0.443135] Fn name = twl4030rtc_driver_init
[    0.443141] fn not black listed. Let's see if that was good choice
[    0.443145] Made trace init call start on fn. Begin call the function
[    0.443254] Function fn called: 0 = fn();
[    0.443262] Made trace init call stop on fn
[    0.443274] Fn name = smbalert_driver_init
[    0.443279] fn not black listed. Let's see if that was good choice
[    0.443283] Made trace init call start on fn. Begin call the function
[    0.443330] Function fn called: 0 = fn();
[    0.443337] Made trace init call stop on fn
[    0.443346] Fn name = i2c_dev_init
[    0.443352] fn not black listed. Let's see if that was good choice
[    0.443356] Made trace init call start on fn. Begin call the function
[    0.443361] i2c_dev: i2c /dev entries driver
[    0.443399] Function fn called: 0 = fn();
[    0.443406] Made trace init call stop on fn
[    0.443417] Fn name = stm32f7_i2c_driver_init
[    0.443423] fn not black listed. Let's see if that was good choice
[    0.443427] Made trace init call start on fn. Begin call the function
[    0.443676] Function fn called: 0 = fn();
[    0.443684] Made trace init call stop on fn
[    0.443696] Fn name = i2c_demux_pinctrl_driver_init
[    0.443702] fn not black listed. Let's see if that was good choice
[    0.443707] Made trace init call start on fn. Begin call the function
[    0.443817] Function fn called: 0 = fn();
[    0.443825] Made trace init call stop on fn
[    0.443836] Fn name = i2c_mux_gpio_driver_init
[    0.443841] fn not black listed. Let's see if that was good choice
[    0.443846] Made trace init call start on fn. Begin call the function
[    0.443953] Function fn called: 0 = fn();
[    0.443961] Made trace init call stop on fn
[    0.443972] Fn name = pca954x_driver_init
[    0.443977] fn not black listed. Let's see if that was good choice
[    0.443981] Made trace init call start on fn. Begin call the function
[    0.444027] Function fn called: 0 = fn();
[    0.444034] Made trace init call stop on fn
[    0.444045] Fn name = i2c_mux_pinctrl_driver_init
[    0.444050] fn not black listed. Let's see if that was good choice
[    0.444054] Made trace init call start on fn. Begin call the function
[    0.444164] Function fn called: 0 = fn();
[    0.444171] Made trace init call stop on fn
[    0.444181] Fn name = ptp_kvm_init
[    0.444186] fn not black listed. Let's see if that was good choice
[    0.444191] Made trace init call start on fn. Begin call the function
[    0.444196] Function fn called: -95 = fn();
[    0.444202] Made trace init call stop on fn
[    0.444222] Fn name = as3722_poweroff_driver_init
[    0.444228] fn not black listed. Let's see if that was good choice
[    0.444232] Made trace init call start on fn. Begin call the function
[    0.444320] Function fn called: 0 = fn();
[    0.444328] Made trace init call stop on fn
[    0.444340] Fn name = bcm_kona_reset_driver_init
[    0.444346] fn not black listed. Let's see if that was good choice
[    0.444350] Made trace init call start on fn. Begin call the function
[    0.444459] Function fn called: 0 = fn();
[    0.444467] Made trace init call stop on fn
[    0.444478] Fn name = gpio_poweroff_driver_init
[    0.444484] fn not black listed. Let's see if that was good choice
[    0.444488] Made trace init call start on fn. Begin call the function
[    0.444597] Function fn called: 0 = fn();
[    0.444604] Made trace init call stop on fn
[    0.444615] Fn name = gpio_restart_driver_init
[    0.444620] fn not black listed. Let's see if that was good choice
[    0.444625] Made trace init call start on fn. Begin call the function
[    0.444744] Function fn called: 0 = fn();
[    0.444752] Made trace init call stop on fn
[    0.444763] Fn name = vexpress_reset_driver_init
[    0.444769] fn not black listed. Let's see if that was good choice
[    0.444773] Made trace init call start on fn. Begin call the function
[    0.444914] Function fn called: 0 = fn();
[    0.444921] Made trace init call stop on fn
[    0.444931] Fn name = syscon_reboot_driver_init
[    0.444937] fn not black listed. Let's see if that was good choice
[    0.444941] Made trace init call start on fn. Begin call the function
[    0.445053] Function fn called: 0 = fn();
[    0.445061] Made trace init call stop on fn
[    0.445071] Fn name = syscon_poweroff_register
[    0.445077] fn not black listed. Let's see if that was good choice
[    0.445081] Made trace init call start on fn. Begin call the function
[    0.445192] Function fn called: 0 = fn();
[    0.445199] Made trace init call stop on fn
[    0.445211] Fn name = nvmem_reboot_mode_driver_init
[    0.445217] fn not black listed. Let's see if that was good choice
[    0.445221] Made trace init call start on fn. Begin call the function
[    0.445354] Function fn called: 0 = fn();
[    0.445362] Made trace init call stop on fn
[    0.445373] Fn name = act8945a_charger_driver_init
[    0.445380] fn not black listed. Let's see if that was good choice
[    0.445384] Made trace init call start on fn. Begin call the function
[    0.445455] Function fn called: 0 = fn();
[    0.445463] Made trace init call stop on fn
[    0.445473] Fn name = sbs_battery_driver_init
[    0.445479] fn not black listed. Let's see if that was good choice
[    0.445483] Made trace init call start on fn. Begin call the function
[    0.445530] Function fn called: 0 = fn();
[    0.445536] Made trace init call stop on fn
[    0.445547] Fn name = tps65090_charger_driver_init
[    0.445553] fn not black listed. Let's see if that was good choice
[    0.445557] Made trace init call start on fn. Begin call the function
[    0.445668] Function fn called: 0 = fn();
[    0.445676] Made trace init call stop on fn
[    0.445687] Fn name = scmi_hwmon_drv_init
[    0.445692] fn not black listed. Let's see if that was good choice
[    0.445697] Made trace init call start on fn. Begin call the function
[    0.445774] Function fn called: 0 = fn();
[    0.445782] Made trace init call stop on fn
[    0.445793] Fn name = iio_hwmon_driver_init
[    0.445799] fn not black listed. Let's see if that was good choice
[    0.445803] Made trace init call start on fn. Begin call the function
[    0.445920] Function fn called: 0 = fn();
[    0.445928] Made trace init call stop on fn
[    0.445939] Fn name = lm90_driver_init
[    0.445945] fn not black listed. Let's see if that was good choice
[    0.445949] Made trace init call start on fn. Begin call the function
[    0.445995] Function fn called: 0 = fn();
[    0.446002] Made trace init call stop on fn
[    0.446012] Fn name = lm95245_driver_init
[    0.446017] fn not black listed. Let's see if that was good choice
[    0.446021] Made trace init call start on fn. Begin call the function
[    0.446063] Function fn called: 0 = fn();
[    0.446070] Made trace init call stop on fn
[    0.446081] Fn name = st_mmap_thermal_driver_init
[    0.446087] fn not black listed. Let's see if that was good choice
[    0.446091] Made trace init call start on fn. Begin call the function
[    0.446249] Function fn called: 0 = fn();
[    0.446257] Made trace init call stop on fn
[    0.446279] Fn name = stm_thermal_driver_init
[    0.446286] fn not black listed. Let's see if that was good choice
[    0.446290] Made trace init call start on fn. Begin call the function
[    0.446419] Function fn called: 0 = fn();
[    0.446427] Made trace init call stop on fn
[    0.446438] Fn name = sp805_wdt_driver_init
[    0.446444] fn not black listed. Let's see if that was good choice
[    0.446448] Made trace init call start on fn. Begin call the function
[    0.446491] Function fn called: 0 = fn();
[    0.446498] Made trace init call stop on fn
[    0.446509] Fn name = dw_wdt_driver_init
[    0.446515] fn not black listed. Let's see if that was good choice
[    0.446520] Made trace init call start on fn. Begin call the function
[    0.446634] Function fn called: 0 = fn();
[    0.446642] Made trace init call stop on fn
[    0.446653] Fn name = rn5t618_wdt_driver_init
[    0.446658] fn not black listed. Let's see if that was good choice
[    0.446662] Made trace init call start on fn. Begin call the function
[    0.446735] Function fn called: 0 = fn();
[    0.446742] Made trace init call stop on fn
[    0.446754] Fn name = stm32_iwdg_driver_init
[    0.446759] fn not black listed. Let's see if that was good choice
[    0.446763] Made trace init call start on fn. Begin call the function
[    0.446909] Function fn called: 0 = fn();
[    0.446917] Made trace init call stop on fn
[    0.446928] Fn name = smcwd_driver_init
[    0.467113] fn not black listed. Let's see if that was good choice
[    0.467132] Made trace init call start on fn. Begin call the function
[    0.467431] Function fn called: 0 = fn();
[    0.467444] Made trace init call stop on fn
[    0.467467] Fn name = xwdt_driver_init
[    0.467475] fn not black listed. Let's see if that was good choice
[    0.467479] Made trace init call start on fn. Begin call the function
[    0.467638] Function fn called: 0 = fn();
[    0.467648] Made trace init call stop on fn
[    0.467662] Fn name = stpmic1_wdt_driver_init
[    0.467669] fn not black listed. Let's see if that was good choice
[    0.467673] Made trace init call start on fn. Begin call the function
[    0.467802] Function fn called: 0 = fn();
[    0.467811] Made trace init call stop on fn
[    0.467823] Fn name = dt_cpufreq_platdrv_init
[    0.467830] fn not black listed. Let's see if that was good choice
[    0.467834] Made trace init call start on fn. Begin call the function
[    0.467912] Function fn called: 0 = fn();
[    0.467919] Made trace init call stop on fn
[    0.467930] Fn name = scmi_cpufreq_drv_init
[    0.467935] fn not black listed. Let's see if that was good choice
[    0.467939] Made trace init call start on fn. Begin call the function
[    0.468025] Function fn called: 0 = fn();
[    0.468032] Made trace init call stop on fn
[    0.468044] Fn name = stm32_cpufreq_platdrv_init
[    0.468050] fn not black listed. Let's see if that was good choice
[    0.468054] Made trace init call start on fn. Begin call the function
[    0.468161] Function fn called: 0 = fn();
[    0.468169] Made trace init call stop on fn
[    0.468185] Fn name = stm32_cpufreq_init
[    0.468191] fn not black listed. Let's see if that was good choice
[    0.468195] Made trace init call start on fn. Begin call the function
[    0.468642] Function fn called: 0 = fn();
[    0.468656] Made trace init call stop on fn
[    0.468673] Fn name = psci_idle_init
[    0.468680] fn not black listed. Let's see if that was good choice
[    0.468684] Made trace init call start on fn. Begin call the function
[    0.469056] Function fn called: 0 = fn();
[    0.469071] Made trace init call stop on fn
[    0.469086] Fn name = stm32_cpuidle_driver_init
[    0.469093] fn not black listed. Let's see if that was good choice
[    0.469098] Made trace init call start on fn. Begin call the function
[    0.469252] Function fn called: 0 = fn();
[    0.469260] Made trace init call stop on fn
[    0.469275] Fn name = mmc_pwrseq_simple_driver_init
[    0.469282] fn not black listed. Let's see if that was good choice
[    0.469286] Made trace init call start on fn. Begin call the function
[    0.469409] Function fn called: 0 = fn();
[    0.469418] Made trace init call stop on fn
[    0.469431] Fn name = mmc_pwrseq_emmc_driver_init
[    0.469438] fn not black listed. Let's see if that was good choice
[    0.469442] Made trace init call start on fn. Begin call the function
[    0.469577] Function fn called: 0 = fn();
[    0.469584] Made trace init call stop on fn
[    0.469623] Fn name = mmc_blk_init
[    0.469629] fn not black listed. Let's see if that was good choice
[    0.469633] Made trace init call start on fn. Begin call the function
[    0.469745] Function fn called: 0 = fn();
[    0.469755] Made trace init call stop on fn
[    0.469767] Fn name = mmci_driver_init
[    0.469773] fn not black listed. Let's see if that was good choice
[    0.469777] Made trace init call start on fn. Begin call the function
[    0.469927] Function fn called: 0 = fn();
[    0.469937] Made trace init call stop on fn
[    0.469951] Fn name = sdhci_drv_init
[    0.469956] fn not black listed. Let's see if that was good choice
[    0.469961] Made trace init call start on fn. Begin call the function
[    0.469965] sdhci: Secure Digital Host Controller Interface driver
[    0.469969] sdhci: Copyright(c) Pierre Ossman
[    0.469973] Function fn called: 0 = fn();
[    0.469979] Made trace init call stop on fn
[    0.469988] Fn name = dw_mci_init
[    0.469993] fn not black listed. Let's see if that was good choice
[    0.469997] Made trace init call start on fn. Begin call the function
[    0.470001] Synopsys Designware Multimedia Card Interface Driver
[    0.470006] Function fn called: 0 = fn();
[    0.470011] Made trace init call stop on fn
[    0.470021] Fn name = dw_mci_pltfm_driver_init
[    0.470027] fn not black listed. Let's see if that was good choice
[    0.470031] Made trace init call start on fn. Begin call the function
[    0.470214] Function fn called: 0 = fn();
[    0.470221] Made trace init call stop on fn
[    0.470234] Fn name = dw_mci_exynos_pltfm_driver_init
[    0.470241] fn not black listed. Let's see if that was good choice
[    0.470245] Made trace init call start on fn. Begin call the function
[    0.470480] Function fn called: 0 = fn();
[    0.470487] Made trace init call stop on fn
[    0.470501] Fn name = sdhci_pltfm_drv_init
[    0.470506] fn not black listed. Let's see if that was good choice
[    0.470510] Made trace init call start on fn. Begin call the function
[    0.470515] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.470519] Function fn called: 0 = fn();
[    0.470524] Made trace init call stop on fn
[    0.470535] Fn name = sdhci_arasan_driver_init
[    0.470540] fn not black listed. Let's see if that was good choice
[    0.470544] Made trace init call start on fn. Begin call the function
[    0.470856] Function fn called: 0 = fn();
[    0.470864] Made trace init call stop on fn
[    0.470877] Fn name = sdhci_at91_driver_init
[    0.470883] fn not black listed. Let's see if that was good choice
[    0.470887] Made trace init call start on fn. Begin call the function
[    0.471019] Function fn called: 0 = fn();
[    0.471026] Made trace init call stop on fn
[    0.471038] Fn name = gpio_led_driver_init
[    0.471043] fn not black listed. Let's see if that was good choice
[    0.471047] Made trace init call start on fn. Begin call the function
[    0.471294] Function fn called: 0 = fn();
[    0.471304] Made trace init call stop on fn
[    0.471318] Fn name = led_pwm_driver_init
[    0.471324] fn not black listed. Let's see if that was good choice
[    0.471328] Made trace init call start on fn. Begin call the function
[    0.471451] Function fn called: 0 = fn();
[    0.471459] Made trace init call stop on fn
[    0.471473] Fn name = timer_led_trigger_init
[    0.471479] fn not black listed. Let's see if that was good choice
[    0.471483] Made trace init call start on fn. Begin call the function
[    0.471494] Function fn called: 0 = fn();
[    0.471499] Made trace init call stop on fn
[    0.471510] Fn name = oneshot_led_trigger_init
[    0.471515] fn not black listed. Let's see if that was good choice
[    0.471519] Made trace init call start on fn. Begin call the function
[    0.471526] Function fn called: 0 = fn();
[    0.471531] Made trace init call stop on fn
[    0.471541] Fn name = heartbeat_trig_init
[    0.471546] fn not black listed. Let's see if that was good choice
[    0.471550] Made trace init call start on fn. Begin call the function
[    0.471561] Function fn called: 0 = fn();
[    0.471567] Made trace init call stop on fn
[    0.471576] Fn name = bl_led_trigger_init
[    0.471581] fn not black listed. Let's see if that was good choice
[    0.471585] Made trace init call start on fn. Begin call the function
[    0.471591] Function fn called: 0 = fn();
[    0.471596] Made trace init call stop on fn
[    0.471606] Fn name = gpio_led_trigger_init
[    0.471611] fn not black listed. Let's see if that was good choice
[    0.471616] Made trace init call start on fn. Begin call the function
[    0.471621] Function fn called: 0 = fn();
[    0.471627] Made trace init call stop on fn
[    0.471654] Fn name = ledtrig_cpu_init
[    0.471660] fn not black listed. Let's see if that was good choice
[    0.471664] Made trace init call start on fn. Begin call the function
[    0.471681] ledtrig-cpu: registered to indicate activity on CPUs
[    0.471687] Function fn called: 0 = fn();
[    0.471693] Made trace init call stop on fn
[    0.471703] Fn name = defon_led_trigger_init
[    0.471708] fn not black listed. Let's see if that was good choice
[    0.471712] Made trace init call start on fn. Begin call the function
[    0.471719] Function fn called: 0 = fn();
[    0.471724] Made trace init call stop on fn
[    0.471734] Fn name = transient_trigger_init
[    0.471739] fn not black listed. Let's see if that was good choice
[    0.471743] Made trace init call start on fn. Begin call the function
[    0.471749] Function fn called: 0 = fn();
[    0.471755] Made trace init call stop on fn
[    0.471765] Fn name = ledtrig_camera_init
[    0.471770] fn not black listed. Let's see if that was good choice
[    0.471774] Made trace init call start on fn. Begin call the function
[    0.471783] Function fn called: 0 = fn();
[    0.471789] Made trace init call stop on fn
[    0.471800] Fn name = scmi_power_domain_driver_init
[    0.471806] fn not black listed. Let's see if that was good choice
[    0.471810] Made trace init call start on fn. Begin call the function
[    0.471900] Function fn called: 0 = fn();
[    0.471907] Made trace init call stop on fn
[    0.471921] Fn name = esrt_sysfs_init
[    0.471927] fn not black listed. Let's see if that was good choice
[    0.471931] Made trace init call start on fn. Begin call the function
[    0.471936] Function fn called: -38 = fn();
[    0.471942] Made trace init call stop on fn
[    0.471954] Fn name = smccc_devices_init
[    0.471960] fn not black listed. Let's see if that was good choice
[    0.471964] Made trace init call start on fn. Begin call the function
[    0.471969] Function fn called: 0 = fn();
[    0.471974] Made trace init call stop on fn
[    0.471985] Fn name = smccc_soc_init
[    0.471990] fn not black listed. Let's see if that was good choice
[    0.471994] Made trace init call start on fn. Begin call the function
[    0.471999] Function fn called: 0 = fn();
[    0.472004] Made trace init call stop on fn
[    0.472016] Fn name = stm32_clkevent_lp_driver_init
[    0.472021] fn not black listed. Let's see if that was good choice
[    0.472025] Made trace init call start on fn. Begin call the function
[    0.472208] Function fn called: 0 = fn();
[    0.472215] Made trace init call stop on fn
[    0.472229] Fn name = hid_init
[    0.472234] fn not black listed. Let's see if that was good choice
[    0.472239] Made trace init call start on fn. Begin call the function
[    0.472348] Function fn called: 0 = fn();
[    0.472358] Made trace init call stop on fn
[    0.472371] Fn name = hid_generic_init
[    0.472378] fn not black listed. Let's see if that was good choice
[    0.472382] Made trace init call start on fn. Begin call the function
[    0.472449] Function fn called: 0 = fn();
[    0.472458] Made trace init call stop on fn
[    0.472471] Fn name = hid_init
[    0.472476] fn not black listed. Let's see if that was good choice
[    0.472480] Made trace init call start on fn. Begin call the function
[    0.472563] usbcore: registered new interface driver usbhid
[    0.472572] usbhid: USB HID core driver
[    0.472576] Function fn called: 0 = fn();
[    0.472582] Made trace init call stop on fn
[    0.472591] Fn name = bcma_modinit
[    0.472597] fn not black listed. Let's see if that was good choice
[    0.472601] Made trace init call start on fn. Begin call the function
[    0.472739] Function fn called: 0 = fn();
[    0.472746] Made trace init call stop on fn
[    0.472757] Fn name = stm32_ipcc_driver_init
[    0.472763] fn not black listed. Let's see if that was good choice
[    0.472767] Made trace init call start on fn. Begin call the function
[    0.472900] Function fn called: 0 = fn();
[    0.472908] Made trace init call stop on fn
[    0.472918] Fn name = rproc_virtio_driver_init
[    0.472924] fn not black listed. Let's see if that was good choice
[    0.472928] Made trace init call start on fn. Begin call the function
[    0.473006] Function fn called: 0 = fn();
[    0.473013] Made trace init call stop on fn
[    0.473024] Fn name = rproc_srm_core_driver_init
[    0.473030] fn not black listed. Let's see if that was good choice
[    0.473035] Made trace init call start on fn. Begin call the function
[    0.473149] Function fn called: 0 = fn();
[    0.473157] Made trace init call stop on fn
[    0.473183] Fn name = rproc_srm_dev_driver_init
[    0.473190] fn not black listed. Let's see if that was good choice
[    0.473194] Made trace init call start on fn. Begin call the function
[    0.473315] Function fn called: 0 = fn();
[    0.473322] Made trace init call stop on fn
[    0.473333] Fn name = tee_rproc_fw_mod_init
[    0.473338] fn not black listed. Let's see if that was good choice
[    0.473342] Made trace init call start on fn. Begin call the function
[    0.473382] Function fn called: 0 = fn();
[    0.473390] Made trace init call stop on fn
[    0.473399] Fn name = stm32_rproc_driver_init
[    0.473406] fn not black listed. Let's see if that was good choice
[    0.473410] Made trace init call start on fn. Begin call the function
[    0.473653] Function fn called: 0 = fn();
[    0.473661] Made trace init call stop on fn
[    0.473671] Fn name = extcon_class_init
[    0.473676] fn not black listed. Let's see if that was good choice
[    0.473680] Made trace init call start on fn. Begin call the function
[    0.473714] Function fn called: 0 = fn();
[    0.473721] Made trace init call stop on fn
[    0.473731] Fn name = usb_extcon_driver_init
[    0.473737] fn not black listed. Let's see if that was good choice
[    0.473741] Made trace init call start on fn. Begin call the function
[    0.473874] Function fn called: 0 = fn();
[    0.473882] Made trace init call stop on fn
[    0.473894] Fn name = pl353_smc_driver_init
[    0.473900] fn not black listed. Let's see if that was good choice
[    0.473904] Made trace init call start on fn. Begin call the function
[    0.473967] Function fn called: 0 = fn();
[    0.473975] Made trace init call stop on fn
[    0.473986] Fn name = stm32_fmc2_ebi_driver_init
[    0.473992] fn not black listed. Let's see if that was good choice
[    0.473996] Made trace init call start on fn. Begin call the function
[    0.474161] Function fn called: 0 = fn();
[    0.474169] Made trace init call stop on fn
[    0.474181] Fn name = iio_configfs_init
[    0.474187] fn not black listed. Let's see if that was good choice
[    0.474191] Made trace init call start on fn. Begin call the function
[    0.474314] Function fn called: 0 = fn();
[    0.474325] Made trace init call stop on fn
[    0.474336] Fn name = iio_sw_trigger_init
[    0.474342] fn not black listed. Let's see if that was good choice
[    0.474346] Made trace init call start on fn. Begin call the function
[    0.474365] Function fn called: 0 = fn();
[    0.474372] Made trace init call stop on fn
[    0.474381] Fn name = xadc_driver_init
[    0.474386] fn not black listed. Let's see if that was good choice
[    0.474390] Made trace init call start on fn. Begin call the function
[    0.474564] Function fn called: 0 = fn();
[    0.474572] Made trace init call stop on fn
[    0.474584] Fn name = iio_sd_mod_adc_init
[    0.474590] fn not black listed. Let's see if that was good choice
[    0.474594] Made trace init call start on fn. Begin call the function
[    0.474737] Function fn called: 0 = fn();
[    0.474744] Made trace init call stop on fn
[    0.474755] Fn name = mpu3050_i2c_driver_init
[    0.474760] fn not black listed. Let's see if that was good choice
[    0.474765] Made trace init call start on fn. Begin call the function
[    0.474827] Function fn called: 0 = fn();
[    0.474834] Made trace init call stop on fn
[    0.474843] Fn name = hts221_driver_init
[    0.474849] fn not black listed. Let's see if that was good choice
[    0.474853] Made trace init call start on fn. Begin call the function
[    0.474897] Function fn called: 0 = fn();
[    0.474904] Made trace init call stop on fn
[    0.474914] Fn name = hts221_driver_init
[    0.474920] fn not black listed. Let's see if that was good choice
[    0.474925] Made trace init call start on fn. Begin call the function
[    0.474968] Function fn called: 0 = fn();
[    0.474975] Made trace init call stop on fn
[    0.474984] Fn name = isl29018_driver_init
[    0.474990] fn not black listed. Let's see if that was good choice
[    0.474994] Made trace init call start on fn. Begin call the function
[    0.475037] Function fn called: 0 = fn();
[    0.475044] Made trace init call stop on fn
[    0.475054] Fn name = isl29028_driver_init
[    0.475059] fn not black listed. Let's see if that was good choice
[    0.475064] Made trace init call start on fn. Begin call the function
[    0.475107] Function fn called: 0 = fn();
[    0.475115] Made trace init call stop on fn
[    0.475141] Fn name = ak8975_driver_init
[    0.475148] fn not black listed. Let's see if that was good choice
[    0.475152] Made trace init call start on fn. Begin call the function
[    0.475210] Function fn called: 0 = fn();
[    0.475217] Made trace init call stop on fn
[    0.475228] Fn name = iio_trig_hrtimer_init
[    0.475234] fn not black listed. Let's see if that was good choice
[    0.475238] Made trace init call start on fn. Begin call the function
[    0.475263] Function fn called: 0 = fn();
[    0.475271] Made trace init call stop on fn
[    0.475280] Fn name = stm32_romem_driver_init
[    0.475286] fn not black listed. Let's see if that was good choice
[    0.475290] Made trace init call start on fn. Begin call the function
[    0.476034] Function fn called: 0 = fn();
[    0.476049] Made trace init call stop on fn
[    0.476065] Fn name = stm32_tamp_nvram_driver_init
[    0.476072] fn not black listed. Let's see if that was good choice
[    0.476076] Made trace init call start on fn. Begin call the function
[    0.497491] Function fn called: 0 = fn();
[    0.497512] Made trace init call stop on fn
[    0.497538] Fn name = optee_core_init
[    0.497545] fn not black listed. Let's see if that was good choice
[    0.497549] Made trace init call start on fn. Begin call the function
[    0.497727] optee: probing for conduit method.
[    0.497757] optee: revision 3.19 (0f6e5b02)
[    0.537699] optee: dynamic shared memory is enabled
[    0.607364] optee: initialized driver
[    0.607714] Function fn called: 0 = fn();
[    0.607726] Made trace init call stop on fn
[    0.607778] Fn name = icc_init
[    0.607785] fn not black listed. Let's see if that was good choice
[    0.607790] Made trace init call start on fn. Begin call the function
[    0.608353] Function fn called: 0 = fn();
[    0.608369] Made trace init call stop on fn
[    0.608385] Fn name = sock_diag_init
[    0.608394] fn not black listed. Let's see if that was good choice
[    0.608399] Made trace init call start on fn. Begin call the function
[    0.608469] Function fn called: 0 = fn();
[    0.608480] Made trace init call stop on fn
[    0.608493] Fn name = failover_init
[    0.608499] fn not black listed. Let's see if that was good choice
[    0.608503] Made trace init call start on fn. Begin call the function
[    0.608518] Function fn called: 0 = fn();
[    0.608523] Made trace init call stop on fn
[    0.608534] Fn name = blackhole_init
[    0.608539] fn not black listed. Let's see if that was good choice
[    0.608543] Made trace init call start on fn. Begin call the function
[    0.608551] Function fn called: 0 = fn();
[    0.608556] Made trace init call stop on fn
[    0.608567] Fn name = gre_offload_init
[    0.608572] fn not black listed. Let's see if that was good choice
[    0.608576] Made trace init call start on fn. Begin call the function
[    0.608582] Function fn called: 0 = fn();
[    0.608587] Made trace init call stop on fn
[    0.608598] Fn name = sysctl_ipv4_init
[    0.608603] fn not black listed. Let's see if that was good choice
[    0.608607] Made trace init call start on fn. Begin call the function
[    0.608860] Function fn called: 0 = fn();
[    0.608871] Made trace init call stop on fn
[    0.608883] Fn name = cubictcp_register
[    0.608890] fn not black listed. Let's see if that was good choice
[    0.608894] Made trace init call start on fn. Begin call the function
[    0.608905] Function fn called: 0 = fn();
[    0.608910] Made trace init call stop on fn
[    0.608921] Fn name = packet_init
[    0.608926] fn not black listed. Let's see if that was good choice
[    0.608930] Made trace init call start on fn. Begin call the function
[    0.608961] NET: Registered PF_PACKET protocol family
[    0.608969] Function fn called: 0 = fn();
[    0.608975] Made trace init call stop on fn
[    0.608986] Fn name = can_init
[    0.608991] fn not black listed. Let's see if that was good choice
[    0.608995] Made trace init call start on fn. Begin call the function
[    0.608999] can: controller area network core
[    0.609279] NET: Registered PF_CAN protocol family
[    0.609294] Function fn called: 0 = fn();
[    0.609302] Made trace init call stop on fn
[    0.609318] Fn name = raw_module_init
[    0.609324] fn not black listed. Let's see if that was good choice
[    0.609328] Made trace init call start on fn. Begin call the function
[    0.609332] can: raw protocol
[    0.609342] Function fn called: 0 = fn();
[    0.609348] Made trace init call stop on fn
[    0.609360] Fn name = bcm_module_init
[    0.609365] fn not black listed. Let's see if that was good choice
[    0.609369] Made trace init call start on fn. Begin call the function
[    0.609373] can: broadcast manager protocol
[    0.609387] Function fn called: 0 = fn();
[    0.609393] Made trace init call stop on fn
[    0.609404] Fn name = cgw_module_init
[    0.609409] fn not black listed. Let's see if that was good choice
[    0.609414] Made trace init call start on fn. Begin call the function
[    0.609418] can: netlink gateway - max_hops=1
[    0.609593] Function fn called: 0 = fn();
[    0.609604] Made trace init call stop on fn
[    0.609618] Fn name = init_rpcsec_gss
[    0.609624] fn not black listed. Let's see if that was good choice
[    0.609628] Made trace init call start on fn. Begin call the function
[    0.609688] Function fn called: 0 = fn();
[    0.609696] Made trace init call stop on fn
[    0.609708] Fn name = strp_dev_init
[    0.609714] fn not black listed. Let's see if that was good choice
[    0.609718] Made trace init call start on fn. Begin call the function
[    0.617464] Function fn called: 0 = fn();
[    0.617483] Made trace init call stop on fn
[    0.617505] Fn name = rfkill_gpio_driver_init
[    0.617512] fn not black listed. Let's see if that was good choice
[    0.617517] Made trace init call start on fn. Begin call the function
[    0.617731] Function fn called: 0 = fn();
[    0.617741] Made trace init call stop on fn
[    0.617758] Fn name = dcbnl_init
[    0.617765] fn not black listed. Let's see if that was good choice
[    0.617770] Made trace init call start on fn. Begin call the function
[    0.617787] Function fn called: 0 = fn();
[    0.617794] Made trace init call stop on fn
[    0.617806] Fn name = init_dns_resolver
[    0.617812] fn not black listed. Let's see if that was good choice
[    0.617816] Made trace init call start on fn. Begin call the function
[    0.617913] Key type dns_resolver registered
[    0.617922] Function fn called: 0 = fn();
[    0.617929] Made trace init call stop on fn
[    0.618098] trace_initcall_level(initcall_level_names[7]);= late
[    0.618120] Fn name = kernel_do_mounts_initrd_sysctls_init
[    0.618127] fn not black listed. Let's see if that was good choice
[    0.618131] Made trace init call start on fn. Begin call the function
[    0.618154] Function fn called: 0 = fn();
[    0.618160] Made trace init call stop on fn
[    0.618169] Fn name = init_machine_late
[    0.618175] fn not black listed. Let's see if that was good choice
[    0.618179] Made trace init call start on fn. Begin call the function
[    0.618188] Function fn called: 0 = fn();
[    0.618194] Made trace init call stop on fn
[    0.618202] Fn name = thumbee_init
[    0.618207] fn not black listed. Let's see if that was good choice
[    0.618211] Made trace init call start on fn. Begin call the function
[    0.618216] ThumbEE CPU extension supported.
[    0.618222] Function fn called: 0 = fn();
[    0.618227] Made trace init call stop on fn
[    0.618235] Fn name = swp_emulation_init
[    0.618241] fn not black listed. Let's see if that was good choice
[    0.618245] Made trace init call start on fn. Begin call the function
[    0.618265] Registering SWP/SWPB emulation handler
[    0.618270] Function fn called: 0 = fn();
[    0.618276] Made trace init call stop on fn
[    0.618286] Fn name = kernel_panic_sysfs_init
[    0.618291] fn not black listed. Let's see if that was good choice
[    0.618295] Made trace init call start on fn. Begin call the function
[    0.618313] Function fn called: 0 = fn();
[    0.618319] Made trace init call stop on fn
[    0.618329] Fn name = kernel_panic_sysctls_init
[    0.618335] fn not black listed. Let's see if that was good choice
[    0.618339] Made trace init call start on fn. Begin call the function
[    0.618352] Function fn called: 0 = fn();
[    0.618357] Made trace init call stop on fn
[    0.618368] Fn name = kernel_exit_sysfs_init
[    0.618373] fn not black listed. Let's see if that was good choice
[    0.618377] Made trace init call start on fn. Begin call the function
[    0.618389] Function fn called: 0 = fn();
[    0.618396] Made trace init call stop on fn
[    0.618406] Fn name = kernel_exit_sysctls_init
[    0.618411] fn not black listed. Let's see if that was good choice
[    0.618415] Made trace init call start on fn. Begin call the function
[    0.618427] Function fn called: 0 = fn();
[    0.618433] Made trace init call stop on fn
[    0.618443] Fn name = reboot_ksysfs_init
[    0.618449] fn not black listed. Let's see if that was good choice
[    0.618453] Made trace init call start on fn. Begin call the function
[    0.618488] Function fn called: 0 = fn();
[    0.618496] Made trace init call stop on fn
[    0.618507] Fn name = sched_core_sysctl_init
[    0.618513] fn not black listed. Let's see if that was good choice
[    0.618517] Made trace init call start on fn. Begin call the function
[    0.618524] Function fn called: 0 = fn();
[    0.618531] Made trace init call stop on fn
[    0.618541] Fn name = sched_fair_sysctl_init
[    0.618546] fn not black listed. Let's see if that was good choice
[    0.618550] Made trace init call start on fn. Begin call the function
[    0.618562] Function fn called: 0 = fn();
[    0.618568] Made trace init call stop on fn
[    0.618579] Fn name = sched_dl_sysctl_init
[    0.618584] fn not black listed. Let's see if that was good choice
[    0.618589] Made trace init call start on fn. Begin call the function
[    0.618600] Function fn called: 0 = fn();
[    0.618606] Made trace init call stop on fn
[    0.618617] Fn name = sched_rt_sysctl_init
[    0.618623] fn not black listed. Let's see if that was good choice
[    0.618627] Made trace init call start on fn. Begin call the function
[    0.618641] Function fn called: 0 = fn();
[    0.618647] Made trace init call stop on fn
[    0.618658] Fn name = cpu_latency_qos_init
[    0.618663] fn not black listed. Let's see if that was good choice
[    0.618668] Made trace init call start on fn. Begin call the function
[    0.618992] Function fn called: 0 = fn();
[    0.619003] Made trace init call stop on fn
[    0.619026] Fn name = pm_debugfs_init
[    0.619033] fn not black listed. Let's see if that was good choice
[    0.619037] Made trace init call start on fn. Begin call the function
[    0.619068] Function fn called: 0 = fn();
[    0.619075] Made trace init call stop on fn
[    0.619086] Fn name = printk_late_init
[    0.619092] fn not black listed. Let's see if that was good choice
[    0.619096] Made trace init call start on fn. Begin call the function
[    0.619129] Function fn called: 0 = fn();
[    0.619135] Made trace init call stop on fn
[    0.619148] Fn name = init_srcu_module_notifier
[    0.619155] fn not black listed. Let's see if that was good choice
[    0.619159] Made trace init call start on fn. Begin call the function
[    0.619167] Function fn called: 0 = fn();
[    0.619172] Made trace init call stop on fn
[    0.619185] Fn name = tk_debug_sleep_time_init
[    0.619190] fn not black listed. Let's see if that was good choice
[    0.619194] Made trace init call start on fn. Begin call the function
[    0.619213] Function fn called: 0 = fn();
[    0.619220] Made trace init call stop on fn
[    0.619232] Fn name = bpf_ksym_iter_register
[    0.619238] fn not black listed. Let's see if that was good choice
[    0.619242] Made trace init call start on fn. Begin call the function
[    0.619247] Function fn called: 0 = fn();
[    0.619253] Made trace init call stop on fn
[    0.619265] Fn name = bpf_rstat_kfunc_init
[    0.619270] fn not black listed. Let's see if that was good choice
[    0.619274] Made trace init call start on fn. Begin call the function
[    0.619279] Function fn called: 0 = fn();
[    0.619284] Made trace init call stop on fn
[    0.619296] Fn name = debugfs_kprobe_init
[    0.619302] fn not black listed. Let's see if that was good choice
[    0.619306] Made trace init call start on fn. Begin call the function
[    0.619379] Function fn called: 0 = fn();
[    0.619386] Made trace init call stop on fn
[    0.619396] Fn name = kernel_delayacct_sysctls_init
[    0.619402] fn not black listed. Let's see if that was good choice
[    0.619406] Made trace init call start on fn. Begin call the function
[    0.619418] Function fn called: 0 = fn();
[    0.619424] Made trace init call stop on fn
[    0.619432] Fn name = taskstats_init
[    0.619437] fn not black listed. Let's see if that was good choice
[    0.619441] Made trace init call start on fn. Begin call the function
[    0.619505] registered taskstats version 1
[    0.619514] Function fn called: 0 = fn();
[    0.619519] Made trace init call stop on fn
[    0.619530] Fn name = bpf_key_sig_kfuncs_init
[    0.619535] fn not black listed. Let's see if that was good choice
[    0.619540] Made trace init call start on fn. Begin call the function
[    0.619544] Function fn called: 0 = fn();
[    0.619550] Made trace init call stop on fn
[    0.619558] Fn name = bpf_syscall_sysctl_init
[    0.619563] fn not black listed. Let's see if that was good choice
[    0.619567] Made trace init call start on fn. Begin call the function
[    0.619582] Function fn called: 0 = fn();
[    0.619587] Made trace init call stop on fn
[    0.619596] Fn name = kfunc_init
[    0.619601] fn not black listed. Let's see if that was good choice
[    0.619605] Made trace init call start on fn. Begin call the function
[    0.619610] Function fn called: 0 = fn();
[    0.619615] Made trace init call stop on fn
[    0.619623] Fn name = bpf_map_iter_init
[    0.619629] fn not black listed. Let's see if that was good choice
[    0.619633] Made trace init call start on fn. Begin call the function
[    0.619638] Function fn called: 0 = fn();
[    0.619643] Made trace init call stop on fn
[    0.619651] Fn name = task_iter_init
[    0.619656] fn not black listed. Let's see if that was good choice
[    0.619660] Made trace init call start on fn. Begin call the function
[    0.619667] Function fn called: 0 = fn();
[    0.619672] Made trace init call stop on fn
[    0.619680] Fn name = bpf_prog_iter_init
[    0.619685] fn not black listed. Let's see if that was good choice
[    0.619690] Made trace init call start on fn. Begin call the function
[    0.619694] Function fn called: 0 = fn();
[    0.619700] Made trace init call stop on fn
[    0.619708] Fn name = bpf_link_iter_init
[    0.619713] fn not black listed. Let's see if that was good choice
[    0.619717] Made trace init call start on fn. Begin call the function
[    0.619722] Function fn called: 0 = fn();
[    0.619727] Made trace init call stop on fn
[    0.619748] Fn name = init_trampolines
[    0.619753] fn not black listed. Let's see if that was good choice
[    0.619758] Made trace init call start on fn. Begin call the function
[    0.619765] Function fn called: 0 = fn();
[    0.619770] Made trace init call stop on fn
[    0.619779] Fn name = bpf_cgroup_iter_init
[    0.619785] fn not black listed. Let's see if that was good choice
[    0.619789] Made trace init call start on fn. Begin call the function
[    0.619795] Function fn called: 0 = fn();
[    0.619800] Made trace init call stop on fn
[    0.619809] Fn name = load_system_certificate_list
[    0.619814] fn not black listed. Let's see if that was good choice
[    0.619819] Made trace init call start on fn. Begin call the function
[    0.619823] Loading compiled-in X.509 certificates
[    1.422585] Freeing initrd memory: 6100K
[    1.466692] Loaded X.509 cert 'Build time autogenerated kernel key: 96c9d5901f398595f8d0147113c422cf9d80a5c4'
[    1.466716] Function fn called: 0 = fn();
[    1.466725] Made trace init call stop on fn
[    1.466752] Fn name = fault_around_debugfs
[    1.466758] fn not black listed. Let's see if that was good choice
[    1.466763] Made trace init call start on fn. Begin call the function
[    1.466806] Function fn called: 0 = fn();
[    1.466814] Made trace init call stop on fn
[    1.466827] Fn name = max_swapfiles_check
[    1.466834] fn not black listed. Let's see if that was good choice
[    1.466838] Made trace init call start on fn. Begin call the function
[    1.466842] Function fn called: 0 = fn();
[    1.466848] Made trace init call stop on fn
[    1.466859] Fn name = check_early_ioremap_leak
[    1.466865] fn not black listed. Let's see if that was good choice
[    1.466869] Made trace init call start on fn. Begin call the function
[    1.466874] Function fn called: 0 = fn();
[    1.466879] Made trace init call stop on fn
[    1.466888] Fn name = ubifs_init
[    1.466893] fn not black listed. Let's see if that was good choice
[    1.466897] Made trace init call start on fn. Begin call the function
[    1.479583] Function fn called: 0 = fn();
[    1.479613] Made trace init call stop on fn
[    1.479634] Fn name = pstore_init
[    1.479643] fn not black listed. Let's see if that was good choice
[    1.479647] Made trace init call start on fn. Begin call the function
[    1.479664] Function fn called: 0 = fn();
[    1.479672] Made trace init call stop on fn
[    1.479683] Fn name = init_root_keyring
[    1.479689] fn not black listed. Let's see if that was good choice
[    1.479693] Made trace init call start on fn. Begin call the function
[    1.479920] Function fn called: 0 = fn();
[    1.479930] Made trace init call stop on fn
[    1.479947] Fn name = crypto_algapi_init
[    1.479955] fn not black listed. Let's see if that was good choice
[    1.479959] Made trace init call start on fn. Begin call the function
[    1.497987] Function fn called: 0 = fn();
[    1.498010] Made trace init call stop on fn
[    1.498030] Fn name = blk_timeout_init
[    1.498037] fn not black listed. Let's see if that was good choice
[    1.498042] Made trace init call start on fn. Begin call the function
[    1.498046] Function fn called: 0 = fn();
[    1.498051] Made trace init call stop on fn
[    1.498064] Fn name = clk_debug_init
[    1.498070] fn not black listed. Let's see if that was good choice
[    1.498074] Made trace init call start on fn. Begin call the function
[    1.498668] Function fn called: 0 = fn();
[    1.498679] Made trace init call stop on fn
[    1.498695] Fn name = sync_state_resume_initcall
[    1.498702] fn not black listed. Let's see if that was good choice
[    1.498707] Made trace init call start on fn. Begin call the function
[    1.498713] Function fn called: 0 = fn();
[    1.498719] Made trace init call stop on fn
[    1.498727] Fn name = deferred_probe_initcall
[    1.498733] fn not black listed. Let's see if that was good choice
[    1.498737] Made trace init call start on fn. Begin call the function
[    1.643126] arm-scmi firmware:scmi: Enabled polling mode TX channel - prot_id:16
[    1.643382] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
[    1.712399] arm-scmi firmware:scmi: SCMI Protocol v2.0 'ST:' Firmware version 0x0
[    2.999390] random: crng init done
[    3.098981] stm32-dma 48000000.dma-controller: STM32 DMA driver registered
[    3.107016] 8<--- cut here ---
[    3.107031] Unhandled fault: imprecise external abort (0x1c06) at 0xe0b0c588
[    3.107046] [e0b0c588] *pgd=c3445811, *pte=c344d24f, *ppte=c344d01f
[    3.107085] Internal error: : 1c06 [#1] PREEMPT ARM
[    3.107098] Modules linked in:
[    3.107110] CPU: 0 PID: 9 Comm: kworker/u2:0 Not tainted 6.1.82 #15
[    3.107125] Hardware name: STM32 (Device Tree Support)
[    3.107134] Workqueue: eval_map_wq eval_map_work_func
[    3.107164] PC is at update_event_printk+0x60/0x1c0
[    3.107191] LR is at update_event_printk+0x8c/0x1c0
[    3.107211] pc : [<c01e280c>]    lr : [<c01e2838>]    psr: a0000053
[    3.107221] sp : e0831ee8  ip : 0000002c  fp : 0000014c
[    3.107230] r10: 000002d4  r9 : c13b90cc  r8 : 00000014
[    3.107238] r7 : 00000000  r6 : c123efa4  r5 : c0e4b56c  r4 : c139233e
[    3.107249] r3 : 00000020  r2 : fffffff0  r1 : c139232a  r0 : ffffffff
[    3.107259] Flags: NzCv  IRQs on  FIQs off  Mode SVC_32  ISA ARM  Segment none
[    3.107272] Control: 10c5387d  Table: c2998059  DAC: 00000051
[    3.107279] Register r0 information: non-paged memory
[    3.107294] Register r1 information: non-slab/vmalloc memory
[    3.107307] Register r2 information: non-paged memory
[    3.107317] Register r3 information: non-paged memory
[    3.107326] Register r4 information: non-slab/vmalloc memory
[    3.107337] Register r5 information: non-slab/vmalloc memory
[    3.107348] Register r6 information: non-slab/vmalloc memory
[    3.107358] Register r7 information: NULL pointer
[    3.107368] Register r8 information: non-paged memory
[    3.107378] Register r9 information: non-slab/vmalloc memory
[    3.107388] Register r10 information: non-paged memory
[    3.107399] Register r11 information: non-paged memory
[    3.107409] Register r12 information: non-paged memory
[    3.107420] Process kworker/u2:0 (pid: 9, stack limit = 0x(ptrval))
[    3.107431] Stack: (0xe0831ee8 to 0xe0832000)
[    3.107448] 1ee0:                   0000017d c124cc58 c13b9080 c0d32eb4 c13513f0 c01e6be0
[    3.107464] 1f00: e0831f24 c124c660 c1a3e680 c123c7fc c1803780 c142e560 c180f200 00000000
[    3.107481] 1f20: c18cc200 c180f205 c1805400 c013dc94 c1805444 c18cc200 c1805400 c1803780
[    3.107497] 1f40: c1805400 c1803798 c1805418 c13468e0 c18cc200 00000088 c1805400 c013dfd0
[    3.107513] 1f60: e0811ec0 c13468e0 60000053 c1896940 c1896e80 c18cc200 e0811ec0 c013df8c
[    3.107530] 1f80: c1803780 00000000 00000000 c01450d0 c1896940 c0144ff8 00000000 00000000
[    3.107545] 1fa0: 00000000 00000000 00000000 c010014c 00000000 00000000 00000000 00000000
[    3.107560] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    3.107575] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[    3.107596]  update_event_printk from trace_event_eval_update+0xb4/0xf8
[    3.107634]  trace_event_eval_update from process_one_work+0x1d0/0x4c8
[    3.107667]  process_one_work from worker_thread+0x44/0x580
[    3.107699]  worker_thread from kthread+0xd8/0xf4
[    3.107729]  kthread from ret_from_fork+0x14/0x28
[    3.107752] Exception stack(0xe0831fb0 to 0xe0831ff8)
[    3.107765] 1fa0:                                     00000000 00000000 00000000 00000000
[    3.107781] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    3.107794] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[    3.107812] Code: e30b556c e34c50e4 e3520009 9a000027 (e7d52003)
[    3.107823] ---[ end trace 0000000000000000 ]---
[    3.107830] note: kworker/u2:0[9] exited with irqs disabled
[    3.120201] stm32-mdma 58000000.dma-controller: STM32 MDMA driver registered
[    3.127533] /soc/interrupt-controller@5000d000: bank0
[    3.127567] /soc/interrupt-controller@5000d000: bank1
[    3.127586] /soc/interrupt-controller@5000d000: bank2
[    3.149906] stm32_rtc 5c004000.rtc: registered as rtc0
[    3.149956] stm32_rtc 5c004000.rtc: setting system clock to 2000-01-01T00:00:18 UTC (946684818)
[    3.150231] stm32_rtc 5c004000.rtc: Date/Time must be initialized
[    3.150246] stm32_rtc 5c004000.rtc: registered rev:1.2
[    3.153879] stm32-rproc 10000000.m4: wdg irq registered
[    3.177192] remoteproc remoteproc0: releasing m4
[    3.178999] stm32mp157-pinctrl soc:pinctrl@50002000: GPIOA bank added
[    3.179644] stm32mp157-pinctrl soc:pinctrl@50002000: GPIOB bank added
[    3.180266] stm32mp157-pinctrl soc:pinctrl@50002000: GPIOC bank added
[    3.180877] stm32mp157-pinctrl soc:pinctrl@50002000: GPIOD bank added
[    3.181606] stm32mp157-pinctrl soc:pinctrl@50002000: GPIOE bank added
[    3.182232] stm32mp157-pinctrl soc:pinctrl@50002000: GPIOF bank added
[    3.183005] stm32mp157-pinctrl soc:pinctrl@50002000: GPIOG bank added
[    3.183655] stm32mp157-pinctrl soc:pinctrl@50002000: GPIOH bank added
[    3.184290] stm32mp157-pinctrl soc:pinctrl@50002000: GPIOI bank added
[    3.184340] stm32mp157-pinctrl soc:pinctrl@50002000: Pinctrl STM32 initialized
[    3.197749] stm32mp157-pinctrl soc:pinctrl@54004000: GPIOZ bank added
[    3.197773] stm32mp157-pinctrl soc:pinctrl@54004000: Pinctrl STM32 initialized
[    3.205073] stm32-usart 40010000.serial: interrupt mode for rx (no dma)
[    3.205094] stm32-usart 40010000.serial: interrupt mode for tx (no dma)
[    3.205126] 40010000.serial: ttySTM0 at MMIO 0x40010000 (irq = 33, base_baud = 4000000) is a stm32-usart
[   24.073847] printk: console [ttySTM0] enabled
[   24.083981] stm32-dwmac 5800a000.ethernet: IRQ eth_lpi not found
D/TC:? 1 tee_ta_init_session_with_context:549 Re-open TA 94cf71ad-80e6-40b5-a7c6-3dc501eb2803
F/TC:? 1 bsec_pta_invoke_command:278 bsec.pta command 0 ptypes 0x61
F/TC:? 1 bsec_read_mem:86 Read shadow 57 val: 0
F/TC:? 1 bsec_read_mem:86 Read shadow 58 val: 0
F/TC:? 1 bsec_read_mem:148 Buffer orig 0xdbc03008, size 8
D/TC:? 1 tee_ta_close_session:451 csess 0xde051070 id 2
D/TC:? 1 tee_ta_close_session:470 Destroy session
F/TC:? 0 pta_scmi_ocall:205 Posting MSG message on channel 0u
F/TC:? 0 plat_scmi_clock_set_state:466 SCMI clock 8 enable
[   24.139294] stm32-dwmac 5800a000.ethernet: User ID: 0x40, Synopsys ID: 0x42
[   24.144900] stm32-dwmac 5800a000.ethernet: 	DWMAC4/5
[   24.149935] stm32-dwmac 5800a000.ethernet: DMA HW capability register supported
[   24.157135] stm32-dwmac 5800a000.ethernet: RX Checksum Offload Engine supported
[   24.164512] stm32-dwmac 5800a000.ethernet: TX Checksum insertion supported
[   24.171411] stm32-dwmac 5800a000.ethernet: Wake-Up On Lan supported
[   24.177720] stm32-dwmac 5800a000.ethernet: TSO supported
[   24.182882] stm32-dwmac 5800a000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[   24.190852] stm32-dwmac 5800a000.ethernet: device MAC address 56:a7:29:1d:7d:d6
[   24.198053] stm32-dwmac 5800a000.ethernet: Enabled L3L4 Flow TC (entries=2)
[   24.205030] stm32-dwmac 5800a000.ethernet: Enabled RFS Flow TC (entries=10)
[   24.212028] stm32-dwmac 5800a000.ethernet: TSO feature enabled
[   24.217808] stm32-dwmac 5800a000.ethernet: Using 32/32 bits DMA host/device width
[   24.258792] stm32f7-i2c 40012000.i2c: using dma0chan0 (tx) and dma0chan1 (rx) for DMA transfers
[   24.266781] stm32f7-i2c 40012000.i2c: STM32F7 I2C-0 bus adapter
F/TC:? 0 pta_scmi_ocall:205 Posting MSG message on channel 0u
F/TC:? 0 pta_scmi_ocall:205 Posting MSG message on channel 0u
F/TC:? 0 stm32_etzpc_has_access:393 Check Access 5 - attr 3 - requested 3
F/TC:? 0 plat_scmi_rd_set_state:588 SCMI reset 1 set
F/TC:? 0 pta_scmi_ocall:205 Posting MSG message on channel 0u
F/TC:? 0 stm32_etzpc_has_access:393 Check Access 5 - attr 3 - requested 3
F/TC:? 0 plat_scmi_rd_set_state:591 SCMI reset 1 release
F/TC:? 0 pta_scmi_ocall:205 Posting MSG message on channel 0u
[   24.340455] platform 4000b000.audio-controller: Fixed dependency cycle(s) with /soc/etzpc@5c007000/i2c@5c002000/hdmi-transmitter@39
[   24.351119] platform 5a001000.display-controller: Fixed dependency cycle(s) with /soc/etzpc@5c007000/i2c@5c002000/hdmi-transmitter@39
[   24.363095] i2c 1-0039: Fixed dependency cycle(s) with /soc/etzpc@5c007000/audio-controller@4000b000
[   24.372316] i2c 1-0039: Fixed dependency cycle(s) with /soc/display-controller@5a001000
[   24.381896] stpmic1 1-0033: PMIC Chip Version: 0x21
D/TC:0   pwr_scv_handler:56 PWR service: write 0x100 at offset 0x20
F/TC:0   pwr_scv_handler:72 wrt off 20=100 => 100
D/TC:0   pwr_scv_handler:56 PWR service: set 0x1 at offset 0x28
F/TC:0   pwr_scv_handler:77 set off 28=1 => 1
D/TC:0   pwr_scv_handler:56 PWR service: set 0x1 at offset 0x20
F/TC:0   pwr_scv_handler:77 set off 20=1 => 100
[   24.418050] platform 5c002000.i2c:stpmic@33:regulators: Fixed dependency cycle(s) with /soc/etzpc@5c007000/i2c@5c002000/stpmic@33/regulators/buck4
[   24.429867] platform 5c002000.i2c:stpmic@33:regulators: Fixed dependency cycle(s) with /soc/etzpc@5c007000/i2c@5c002000/stpmic@33/regulators/buck2
[   24.474532] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Failed to create device link (0x180) with 1-0033
[   24.483532] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Failed to create device link (0x180) with 1-0033
[   24.493762] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Failed to create device link (0x180) with 1-0033
[   24.503986] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Failed to create device link (0x180) with 1-0033
[   24.514660] stm32f7-i2c 5c002000.i2c: STM32F7 I2C-1 bus adapter
F/TC:? 0 pta_scmi_ocall:205 Posting MSG message on channel 0u
F/TC:? 0 pta_scmi_ocall:205 Posting MSG message on channel 0u
[   24.538854] stm32-rproc 10000000.m4: wdg irq registered
[   24.547106] mmci-pl18x 58007000.mmc: mmc0: PL180 manf 53 rev2 at 0x58007000 irq 45,0 (pio)
[   24.568267] remoteproc remoteproc0: releasing m4
[   24.584720] i2c i2c-1: Added multiplexed i2c bus 2
[   24.593341] input: pmic_onkey as /devices/platform/soc/5c007000.etzpc/5c002000.i2c/i2c-1/1-0033/5c002000.i2c:stpmic@33:onkey/input/input0
[   24.606407] stm32-rproc 10000000.m4: wdg irq registered
[   24.627215] remoteproc remoteproc0: releasing m4
D/TC:0   pwr_scv_handler:56 PWR service: set 0x40000000 at offset 0xc
F/TC:0   pwr_scv_handler:77 set off c=40000000 => 40000000
D/TC:0   pwr_scv_handler:56 PWR service: set 0x10000000 at offset 0xc
F/TC:0   pwr_scv_handler:77 set off c=10000000 => d0000000
D/TC:0   pwr_scv_handler:56 PWR service: clear 0x10000000 at offset 0xc
F/TC:0   pwr_scv_handler:82 clr off c=10000000 => c0000000
D/TC:0   pwr_scv_handler:56 PWR service: clear 0x40000000 at offset 0xc
F/TC:0   pwr_scv_handler:82 clr off c=40000000 => 0
[   24.680143] stm32-usbphyc 5a006000.usbphyc: registered rev:1.0
[   24.691182] [drm] Initialized stm 1.0.0 20170330 for 5a001000.display-controller on minor 0
[   24.699992] dwc2 49000000.usb-otg: supply vusb_d not found, using dummy regulator
[   24.706328] dwc2 49000000.usb-otg: supply vusb_a not found, using dummy regulator
D/TC:0   pwr_scv_handler:56 PWR service: set 0x40000000 at offset 0xc
F/TC:0   pwr_scv_handler:77 set off c=40000000 => 40000000
D/TC:0   pwr_scv_handler:56 PWR service: set 0x10000000 at offset 0xc
F/TC:0   pwr_scv_handler:77 set off c=10000000 => d0000000
F/TC:? 0 pta_scmi_ocall:205 Posting MSG message on channel 0u
F/TC:? 0 plat_scmi_clock_set_state:472 SCMI clock 13 disable
F/TC:0 0 __clk_disable:1187 Clock 140 has been disabled
[   24.755415] dwc2 49000000.usb-otg: EPs: 9, dedicated fifos, 952 entries in SPRAM
F/TC:? 0 pta_scmi_ocall:205 Posting MSG message on channel 0u
F/TC:? 0 plat_scmi_clock_set_state:466 SCMI clock 13 enable
F/TC:0 0 __clk_enable:1174 Clock 140 has been enabled
D/TC:0   pwr_scv_handler:56 PWR service: clear 0x10000000 at offset 0xc
F/TC:0   pwr_scv_handler:82 clr off c=10000000 => c0000000
D/TC:0   pwr_scv_handler:56 PWR service: clear 0x40000000 at offset 0xc
F/TC:0   pwr_scv_handler:82 clr off c=40000000 => 0
D/TC:0   pwr_scv_handler:56 PWR service: set 0x40000000 at offset 0xc
F/TC:0   pwr_scv_handler:77 set off c=40000000 => 40000000
[   24.820928] mmc0: new DDR MMC card at address 0001
[   24.826063] stm32-rproc 10000000.m4: wdg irq registered
[   24.830723] mmcblk0: mmc0:0001 008GB0 7.28 GiB
D/TC:0   pwr_scv_handler:56 PWR service: set 0x10000000 at offset 0xc
F/TC:0   pwr_scv_handler:77 set off c=10000000 => d0000000
[   24.849129] remoteproc remoteproc0: releasing m4
[   24.854548] stm32-rproc 10000000.m4: wdg irq registered
[   24.862937] remoteproc remoteproc0: releasing m4
[   24.866549] Function fn called: 0 = fn();
[   24.866569] Made trace init call stop on fn
[   24.870471]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
[   24.879042] Fn name = genpd_debug_init
[   24.879054] fn not black listed. Let's see if that was good choice
[   24.882697] Made trace init call start on fn. Begin call the function
[   24.889044] ohci-platform 5800c000.usb: Generic Platform OHCI controller
[   24.904872] ehci-platform 5800d000.usb: EHCI Host Controller
[   24.909873] mmcblk0boot0: mmc0:0001 008GB0 4.00 MiB
[   24.915306] ehci-platform 5800d000.usb: new USB bus registered, assigned bus number 1
[   24.922208] Function fn called: 0 = fn();
[   24.922226] Made trace init call stop on fn
[   24.925993] Fn name = ubi_init
[   24.930266] ohci-platform 5800c000.usb: new USB bus registered, assigned bus number 2
[   24.942545] mmcblk0boot1: mmc0:0001 008GB0 4.00 MiB
[   24.947207] fn not black listed. Let's see if that was good choice
[   24.947231] Made trace init call start on fn. Begin call the function
[   24.953995] mmcblk0rpmb: mmc0:0001 008GB0 4.00 MiB, chardev (244:0)
[   24.965443] Function fn called: 0 = fn();
[   24.965457] Made trace init call stop on fn
[   24.969420] Fn name = gpio_keys_init
[   24.973474] fn not black listed. Let's see if that was good choice
[   24.978684] stm32-rproc 10000000.m4: wdg irq registered
[   24.989332] ohci-platform 5800c000.usb: irq 53, io mem 0x5800c000
[   24.994994] ehci-platform 5800d000.usb: irq 52, io mem 0x5800d000
[   25.000961] Made trace init call start on fn. Begin call the function
[   25.001243] Function fn called: 0 = fn();
[   25.013379] Made trace init call stop on fn
[   25.015947] Fn name = efi_shutdown_init
[   25.020254] fn not black listed. Let's see if that was good choice
F/TC:? 0 pta_scmi_ocall:205 Posting MSG message on channel 0u
[   25.023999] Made trace init call start on fn. Begin call the function
[   25.037067] ehci-platform 5800d000.usb: USB 2.0 started, EHCI 1.00
[   25.048331] Function fn called: -19 = fn();
[   25.048341] Made trace init call stop on fn
[   25.052499] Fn name = psci_debugfs_init
F/TC:? 0 plat_scmi_clock_set_state:472 SCMI clock 13 disable
[   25.056646] fn not black listed. Let's see if that was good choice
[   25.071184] hub 2-0:1.0: USB hub found
F/TC:0 0 __clk_disable:1187 Clock 140 has been disabled
[   25.086677] remoteproc remoteproc0: releasing m4
[   25.090038] Made trace init call start on fn. Begin call the function
[   25.090075] Function fn called: 0 = fn();
[   25.096344] Made trace init call stop on fn
[   25.100626] hub 2-0:1.0: 2 ports detected
[   25.108938] Fn name = of_fdt_raw_init
[   25.108952] fn not black listed. Let's see if that was good choice
[   25.112197] Made trace init call start on fn. Begin call the function
[   25.119918] stm32-rproc 10000000.m4: wdg irq registered
[   25.132079] hub 1-0:1.0: USB hub found
[   25.134601] hub 1-0:1.0: 2 ports detected
[   25.147672] Function fn called: 0 = fn();
[   25.147699] Made trace init call stop on fn
[   25.150268] Fn name = bpf_sockmap_iter_init
[   25.154520] fn not black listed. Let's see if that was good choice
[   25.158988] remoteproc remoteproc0: releasing m4
[   25.171417] stm32-rproc 10000000.m4: wdg irq registered
[   25.181380] Made trace init call start on fn. Begin call the function
[   25.181395] Function fn called: 0 = fn();
[   25.186461] Made trace init call stop on fn
[   25.190496] Fn name = bpf_sk_storage_map_iter_init
[   25.194647] fn not black listed. Let's see if that was good choice
[   25.199662] remoteproc remoteproc0: releasing m4
[   25.210255] Made trace init call start on fn. Begin call the function
[   25.210267] Function fn called: 0 = fn();
[   25.216634] Made trace init call stop on fn
[   25.220874] Fn name = sch_default_qdisc
[   25.224830] fn not black listed. Let's see if that was good choice
[   25.228710] Made trace init call start on fn. Begin call the function
[   25.234876] Function fn called: 0 = fn();
[   25.241267] Made trace init call stop on fn
[   25.245321] Fn name = bpf_prog_test_run_init
[   25.249514] fn not black listed. Let's see if that was good choice
[   25.253763] Made trace init call start on fn. Begin call the function
[   25.259943] Function fn called: 0 = fn();
[   25.266308] Made trace init call stop on fn
[   25.270375] Fn name = tcp_congestion_default
[   25.274524] fn not black listed. Let's see if that was good choice
[   25.278803] Made trace init call start on fn. Begin call the function
[   25.284969] Function fn called: 0 = fn();
[   25.291450] Made trace init call stop on fn
[   25.295403] Fn name = ip_auto_config
[   25.299691] fn not black listed. Let's see if that was good choice
[   25.303234] Made trace init call start on fn. Begin call the function
[   25.309440] Function fn called: 0 = fn();
[   25.315806] Made trace init call stop on fn
[   25.319876] Fn name = tcp_bpf_v4_build_proto
[   25.324023] fn not black listed. Let's see if that was good choice
[   25.328307] Made trace init call start on fn. Begin call the function
[   25.334473] Function fn called: 0 = fn();
[   25.340954] Made trace init call stop on fn
[   25.344907] Fn name = udp_bpf_v4_build_proto
[   25.349088] fn not black listed. Let's see if that was good choice
[   25.353335] Made trace init call start on fn. Begin call the function
[   25.359512] Function fn called: 0 = fn();
[   25.365977] Made trace init call stop on fn
[   25.370070] Fn name = bpf_tcp_ca_kfunc_init
[   25.374119] fn not black listed. Let's see if that was good choice
[   25.378399] Made trace init call start on fn. Begin call the function
[   25.384562] Function fn called: 0 = fn();
[   25.390944] Made trace init call stop on fn
[   25.394994] Fn name = late_trace_init
[   25.399174] fn not black listed. Let's see if that was good choice
[   25.402817] Made trace init call start on fn. Begin call the function
[   25.408999] Function fn called: 0 = fn();
[   25.415464] Made trace init call stop on fn
[   25.419426] Fn name = trace_eval_sync
[   25.423574] fn not black listed. Let's see if that was good choice
[   25.427350] Made trace init call start on fn. Begin call the function
[   35.048412] stm32-rproc 10000000.m4: wdg irq registered
[   35.077183] remoteproc remoteproc0: releasing m4
[   35.080560] platform 10000000.m4: deferred probe pending