Public Pastes
daily pastebin goal
14%
SHARE
TWEET

Untitled

a guest Nov 2nd, 2012 36 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [    0.641414] pci 0000:00:07.0: >Enabling HT MSI Mapping
  2. [    0.641601] pci 0000:00:08.0: >Enabling HT MSI Mapping
  3. [    0.641949] pci 0000:02:00.0: >Boot video device
  4. [    0.641961] PCI: CLS 64 bytes, default 64
  5. [    0.642213] LVT offset 1 assigned for vector 0x400
  6. [    0.642300] IBS: LVT offset 1 assigned
  7. [    0.642396] perf: AMD IBS detected (0x00000007)
  8. [    0.642593] audit: initializing netlink socket (disabled)
  9. [    0.642685] type=2000 audit(1351860851.536:1): initialized
  10. [    0.660166] highmem bounce pool size: 64 pages
  11. [    0.660256] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  12. [    0.662241] VFS: Disk quotas dquot_6.5.2
  13. [    0.662362] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  14. [    0.662861] fuse init (API version 7.19)
  15. [    0.662997] msgmni has been set to 1553
  16. [    0.663308] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  17. [    0.663440] io scheduler noop registered
  18. [    0.665322] io scheduler deadline registered (default)
  19. [    0.665409] io scheduler cfq registered
  20. [    0.666035] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  21. [    0.666135] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  22. [    0.666339] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
  23. [    0.666458] ACPI: Power Button [PWRB]
  24. [    0.666575] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
  25. [    0.666689] ACPI: Power Button [PWRF]
  26. [    0.670970] GHES: HEST is not enabled!
  27. [    0.671107] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
  28. [    0.691544] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  29. [    0.712626] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  30. [    0.712973] Linux agpgart interface v0.103
  31. [    0.714314] brd: module loaded
  32. [    0.714926] loop: module loaded
  33. [    0.715098] ahci 0000:00:09.0: >version 3.0
  34. [    0.715239] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
  35. [    0.715362] ahci 0000:00:09.0: >irq 40 for MSI/MSI-X
  36. [    0.715371] ahci 0000:00:09.0: >controller can't do PMP, turning off CAP_PMP
  37. [    0.715517] ahci 0000:00:09.0: >AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode
  38. [    0.715634] ahci 0000:00:09.0: >flags: 64bit ncq sntf led clo pio
  39. [    0.715723] ahci 0000:00:09.0: >setting latency timer to 64
  40. [    0.716357] scsi0 : ahci
  41. [    0.716488] scsi1 : ahci
  42. [    0.716603] scsi2 : ahci
  43. [    0.716718] scsi3 : ahci
  44. [    0.716830] scsi4 : ahci
  45. [    0.716943] scsi5 : ahci
  46. [    0.717136] ata1: SATA max UDMA/133 abar m8192@0xfbe76000 port 0xfbe76100 irq 40
  47. [    0.717250] ata2: SATA max UDMA/133 abar m8192@0xfbe76000 port 0xfbe76180 irq 40
  48. [    0.717364] ata3: SATA max UDMA/133 abar m8192@0xfbe76000 port 0xfbe76200 irq 40
  49. [    0.717477] ata4: SATA max UDMA/133 abar m8192@0xfbe76000 port 0xfbe76280 irq 40
  50. [    0.717591] ata5: SATA max UDMA/133 abar m8192@0xfbe76000 port 0xfbe76300 irq 40
  51. [    0.717704] ata6: SATA max UDMA/133 abar m8192@0xfbe76000 port 0xfbe76380 irq 40
  52. [    0.717896] pata_acpi 0000:00:06.0: >setting latency timer to 64
  53. [    0.718115] Fixed MDIO Bus: probed
  54. [    0.718229] tun: Universal TUN/TAP device driver, 1.6
  55. [    0.718312] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  56. [    0.718429] PPP generic driver version 2.4.2
  57. [    0.718538] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  58. [    0.718650] ehci_hcd 0000:00:02.1: >setting latency timer to 64
  59. [    0.718652] ehci_hcd 0000:00:02.1: >EHCI Host Controller
  60. [    0.718740] ehci_hcd 0000:00:02.1: >new USB bus registered, assigned bus number 1
  61. [    0.718868] ehci_hcd 0000:00:02.1: >debug port 1
  62. [    0.718956] ehci_hcd 0000:00:02.1: >cache line size of 64 is not supported
  63. [    0.718975] ehci_hcd 0000:00:02.1: >irq 22, io mem 0xfbe7ec00
  64. [    0.719096] isapnp: Scanning for PnP cards...
  65. [    0.768042] ehci_hcd 0000:00:02.1: >USB 2.0 started, EHCI 1.00
  66. [    0.768146] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
  67. [    0.768236] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
  68. [    0.768349] usb usb1: >Product: EHCI Host Controller
  69. [    0.768433] usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
  70. [    0.768520] usb usb1: >SerialNumber: 0000:00:02.1
  71. [    0.812079] hub 1-0:1.0: >USB hub found
  72. [    0.812162] hub 1-0:1.0: >6 ports detected
  73. [    0.812309] ehci_hcd 0000:00:04.1: >setting latency timer to 64
  74. [    0.812311] ehci_hcd 0000:00:04.1: >EHCI Host Controller
  75. [    0.812398] ehci_hcd 0000:00:04.1: >new USB bus registered, assigned bus number 2
  76. [    0.812524] ehci_hcd 0000:00:04.1: >debug port 1
  77. [    0.812612] ehci_hcd 0000:00:04.1: >cache line size of 64 is not supported
  78. [    0.812628] ehci_hcd 0000:00:04.1: >irq 20, io mem 0xfbe7e800
  79. [    0.856120] ehci_hcd 0000:00:04.1: >USB 2.0 started, EHCI 1.00
  80. [    0.856215] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
  81. [    0.856304] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
  82. [    0.856417] usb usb2: >Product: EHCI Host Controller
  83. [    0.856501] usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
  84. [    0.856589] usb usb2: >SerialNumber: 0000:00:04.1
  85. [    0.900133] hub 2-0:1.0: >USB hub found
  86. [    0.900214] hub 2-0:1.0: >6 ports detected
  87. [    0.900349] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  88. [    0.900454] ohci_hcd 0000:00:02.0: >setting latency timer to 64
  89. [    0.900457] ohci_hcd 0000:00:02.0: >OHCI Host Controller
  90. [    0.900543] ohci_hcd 0000:00:02.0: >new USB bus registered, assigned bus number 3
  91. [    0.900676] ohci_hcd 0000:00:02.0: >irq 23, io mem 0xfbe7f000
  92. [    0.989575] usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001
  93. [    0.989665] usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
  94. [    0.989778] usb usb3: >Product: OHCI Host Controller
  95. [    0.989862] usb usb3: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
  96. [    0.989949] usb usb3: >SerialNumber: 0000:00:02.0
  97. [    0.990098] hub 3-0:1.0: >USB hub found
  98. [    0.990181] hub 3-0:1.0: >6 ports detected
  99. [    0.990316] ohci_hcd 0000:00:04.0: >setting latency timer to 64
  100. [    0.990318] ohci_hcd 0000:00:04.0: >OHCI Host Controller
  101. [    0.990405] ohci_hcd 0000:00:04.0: >new USB bus registered, assigned bus number 4
  102. [    0.990539] ohci_hcd 0000:00:04.0: >irq 21, io mem 0xfbe7d000
  103. [    1.077446] isapnp: No Plug & Play device found
  104. [    1.079528] usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
  105. [    1.079618] usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
  106. [    1.079731] usb usb4: >Product: OHCI Host Controller
  107. [    1.079815] usb usb4: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
  108. [    1.079902] usb usb4: >SerialNumber: 0000:00:04.0
  109. [    1.080063] hub 4-0:1.0: >USB hub found
  110. [    1.080146] hub 4-0:1.0: >6 ports detected
  111. [    1.080276] uhci_hcd: USB Universal Host Controller Interface driver
  112. [    1.080414] usbcore: registered new interface driver libusual
  113. [    1.080530] i8042: PNP: No PS/2 controller found. Probing ports directly.
  114. [    1.083721] serio: i8042 KBD port at 0x60,0x64 irq 1
  115. [    1.083807] serio: i8042 AUX port at 0x60,0x64 irq 12
  116. [    1.083963] mousedev: PS/2 mouse device common for all mice
  117. [    1.084142] rtc_cmos 00:07: >RTC can wake from S4
  118. [    1.084453] rtc_cmos 00:07: >rtc core: registered rtc_cmos as rtc0
  119. [    1.084593] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
  120. [    1.084721] device-mapper: uevent: version 1.0.3
  121. [    1.084861] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  122. [    1.084999] EISA: Probing bus 0 at eisa.0
  123. [    1.085080] EISA: Cannot allocate resource for mainboard
  124. [    1.085165] Cannot allocate resource for EISA slot 1
  125. [    1.085248] Cannot allocate resource for EISA slot 2
  126. [    1.085331] Cannot allocate resource for EISA slot 3
  127. [    1.085413] Cannot allocate resource for EISA slot 4
  128. [    1.085496] Cannot allocate resource for EISA slot 5
  129. [    1.085579] Cannot allocate resource for EISA slot 6
  130. [    1.085662] Cannot allocate resource for EISA slot 7
  131. [    1.085745] Cannot allocate resource for EISA slot 8
  132. [    1.085828] EISA: Detected 0 cards.
  133. [    1.085913] cpuidle: using governor ladder
  134. [    1.085994] cpuidle: using governor menu
  135. [    1.086074] EFI Variables Facility v0.08 2004-May-17
  136. [    1.086294] ashmem: initialized
  137. [    1.086463] TCP: cubic registered
  138. [    1.086619] NET: Registered protocol family 10
  139. [    1.086848] NET: Registered protocol family 17
  140. [    1.086939] Key type dns_resolver registered
  141. [    1.087102] Using IPI No-Shortcut mode
  142. [    1.087237] PM: Hibernation image not present or could not be loaded.
  143. [    1.087248] registered taskstats version 1
  144. [    1.296638] ata1: SATA link down (SStatus 0 SControl 300)
  145. [    1.396567] ata2: SATA link down (SStatus 0 SControl 300)
  146. [    1.400567] ata5: SATA link down (SStatus 0 SControl 300)
  147. [    1.400664] ata3: SATA link down (SStatus 0 SControl 300)
  148. [    1.400764] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  149. [    1.400861] ata6: SATA link down (SStatus 0 SControl 300)
  150. [    1.492500] usb 3-1: >new full-speed USB device number 2 using ohci_hcd
  151. [    1.640399] Refined TSC clocksource calibration: 2699.999 MHz.
  152. [    1.640487] Switching to clocksource tsc
  153. [    1.782049] usb 3-1: >New USB device found, idVendor=046d, idProduct=c52b
  154. [    1.782139] usb 3-1: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
  155. [    1.782253] usb 3-1: >Product: USB Receiver
  156. [    1.782334] usb 3-1: >Manufacturer: Logitech
  157. [    2.120069] usb 2-4: >new high-speed USB device number 4 using ehci_hcd
  158. [    2.255617] usb 2-4: >New USB device found, idVendor=03f0, idProduct=3307
  159. [    2.255707] usb 2-4: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
  160. [    2.255821] usb 2-4: >Product: v125w
  161. [    2.255901] usb 2-4: >Manufacturer: HP
  162. [    2.255983] usb 2-4: >SerialNumber: NQF653WI50W077AS
  163. [    2.687674] usb 4-1: >new full-speed USB device number 2 using ohci_hcd
  164. [    2.990237] usb 4-1: >New USB device found, idVendor=046d, idProduct=0a1d
  165. [    2.990326] usb 4-1: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
  166. [    2.990440] usb 4-1: >Product: Logitech Wireless Headset H760
  167. [    2.990525] usb 4-1: >Manufacturer: Logitech
  168. [    3.096806] Freeing initrd memory: 16484k freed
  169. [    3.103594] Initializing USB Mass Storage driver...
  170. [    3.103775] scsi6 : usb-storage 2-4:1.0
  171. [    3.103919] usbcore: registered new interface driver usb-storage
  172. [    3.104006] USB Mass Storage support registered.
  173. [    3.104061] Key type trusted registered
  174. [    3.105577] Key type encrypted registered
  175. [    3.107629]   Magic number: 4:343:935
  176. [    3.107852] rtc_cmos 00:07: >setting system clock to 2012-11-02 12:54:14 UTC (1351860854)
  177. [    3.108013] powernow-k8: Found 1 AMD Athlon(tm) 7750 Dual-Core Processor (2 cpu cores) (version 2.20.00)
  178. [    3.108143] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
  179. [    3.108143] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
  180. [    3.108318] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  181. [    3.108404] EDD information not available.
  182. [    3.303258] usb 4-2: >new full-speed USB device number 3 using ohci_hcd
  183. [    3.506893] usb 4-2: >New USB device found, idVendor=046d, idProduct=08d7
  184. [    3.506984] usb 4-2: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
  185. [    4.104751] scsi 6:0:0:0: >Direct-Access     HP       v125w            4096 PQ: 0 ANSI: 0 CCS
  186. [    4.105405] sd 6:0:0:0: >Attached scsi generic sg0 type 0
  187. [    4.105982] sd 6:0:0:0: >[sda] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB)
  188. [    4.107605] sd 6:0:0:0: >[sda] Write Protect is off
  189. [    4.107689] sd 6:0:0:0: >[sda] Mode Sense: 43 00 00 00
  190. [    4.108604] sd 6:0:0:0: >[sda] No Caching mode page present
  191. [    4.108690] sd 6:0:0:0: >[sda] Assuming drive cache: write through
  192. [    4.112601] sd 6:0:0:0: >[sda] No Caching mode page present
  193. [    4.112687] sd 6:0:0:0: >[sda] Assuming drive cache: write through
  194. [    4.113735]  sda: sda1
  195. [    4.116598] sd 6:0:0:0: >[sda] No Caching mode page present
  196. [    4.116684] sd 6:0:0:0: >[sda] Assuming drive cache: write through
  197. [    4.116771] sd 6:0:0:0: >[sda] Attached SCSI removable disk
  198. [    6.397154] ata4.00: qc timeout (cmd 0xec)
  199. [    6.397238] ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
  200. [    6.716933] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  201. [   16.710221] ata4.00: qc timeout (cmd 0xec)
  202. [   16.710304] ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
  203. [   16.710391] ata4: limiting SATA link speed to 1.5 Gbps
  204. [   17.029877] ata4: SATA link up <unknown> (SStatus 103 SControl 310)
  205. [   47.009388] ata4.00: qc timeout (cmd 0xec)
  206. [   47.009472] ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
  207. [   47.441051] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
  208. [   47.441215] Freeing unused kernel memory: 756k freed
  209. [   47.441572] Write protecting the kernel text: 5960k
  210. [   47.441671] Write protecting the kernel read-only data: 2424k
  211. [   47.441756] NX-protecting the kernel data: 4280k
  212. [   47.456501] udevd[108]: starting version 175
  213. [   47.518783] wmi: Mapper loaded
  214. [   47.546674] pata_amd 0000:00:06.0: >version 0.4.1
  215. [   47.546715] pata_amd 0000:00:06.0: >setting latency timer to 64
  216. [   47.547049] scsi7 : pata_amd
  217. [   47.548213] sky2: driver version 1.30
  218. [   47.548350] sky2 0000:04:00.0: >Yukon-2 EC Ultra chip revision 5
  219. [   47.548533] sky2 0000:04:00.0: >irq 41 for MSI/MSI-X
  220. [   47.548668] scsi8 : pata_amd
  221. [   47.549078] sky2 0000:04:00.0: >eth0: addr 00:e0:61:15:80:66
  222. [   47.549741] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
  223. [   47.549833] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
  224. [   47.552029] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
  225. [   47.554621] [drm] Initialized drm 1.1.0 20060810
  226. [   47.589798] usbcore: registered new interface driver usbhid
  227. [   47.589889] usbhid: USB HID core driver
  228. [   47.647833] logitech-djreceiver 0003:046D:C52B.0003: >hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.0-1/input2
  229. [   47.655845] input: Logitech Unifying Device. Wireless PID:101a as /devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1:1.2/0003:046D:C52B.0003/input/input2
  230. [   47.656052] logitech-djdevice 0003:046D:C52B.0005: >input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101a] on usb-0000:00:02.0-1:1
  231. [   47.657956] input: Logitech Unifying Device. Wireless PID:2010 as /devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1:1.2/0003:046D:C52B.0003/input/input3
  232. [   47.658163] logitech-djdevice 0003:046D:C52B.0006: >input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2010] on usb-0000:00:02.0-1:2
  233. [   47.660733] input: Logitech Logitech Wireless Headset H760 as /devices/pci0000:00/0000:00:04.0/usb4/4-1/4-1:1.3/input/input4
  234. [   47.660959] hid-generic 0003:046D:0A1D.0004: >input,hiddev0,hidraw3: USB HID v1.11 Device [Logitech Logitech Wireless Headset H760] on usb-0000:00:04.0-1/input3
  235. [   47.833090] ata7.01: ATAPI: Hewlett-Packard DVD Writer 200, 1.72, max UDMA/33
  236. [   47.833187] ata7: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc00000) ACPI=0x701f (900:60:0x14)
  237. [   47.849003] ata7.01: configured for UDMA/33
  238. [   47.851787] scsi 7:0:1:0: >CD-ROM            HP       DVD Writer 200j  1.72 PQ: 0 ANSI: 5
  239. [   47.853038] sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
  240. [   47.853128] cdrom: Uniform CD-ROM driver Revision: 3.20
  241. [   47.853310] sr 7:0:1:0: >Attached scsi CD-ROM sr0
  242. [   47.853448] sr 7:0:1:0: >Attached scsi generic sg1 type 5
  243. [   47.853618] ata8: port disabled--ignoring
  244. [   47.854234] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
  245. [   47.854342] megaraid: probe new device 0x1000:0x1960:0x1000:0x4523: bus 1:slot 9:func 0
  246. [   47.854685] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19
  247. [   47.859728] MXM: GUID detected in BIOS
  248. [   47.860844] [drm] nouveau 0000:02:00.0: Detected an NVc0 generation card (0x0ce080a1)
  249. [   47.864669] [drm] nouveau 0000:02:00.0: Checking PRAMIN for VBIOS
  250. [   47.876781] megaraid: fw version:[713G] bios version:[G117]
  251. [   47.916817] scsi9 : LSI Logic MegaRAID driver
  252. [   47.917330] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
  253. [   47.917937] scsi[9]: scanning scsi channel 0 [Phy 0] for non-raid devices
  254. [   47.963252] [drm] nouveau 0000:02:00.0: ... appears to be valid
  255. [   47.963340] [drm] nouveau 0000:02:00.0: Using VBIOS from PRAMIN
  256. [   47.963426] [drm] nouveau 0000:02:00.0: BIT BIOS found
  257. [   47.963511] [drm] nouveau 0000:02:00.0: Bios version 70.24.18.00
  258. [   47.963599] [drm] nouveau 0000:02:00.0: TMDS table version 2.0
  259. [   47.963951] [drm] nouveau 0000:02:00.0: MXM: no VBIOS data, nothing to do
  260. [   47.964042] [drm] nouveau 0000:02:00.0: DCB version 4.0
  261. [   47.964127] [drm] nouveau 0000:02:00.0: DCB outp 00: 02000300 00000000
  262. [   47.964216] [drm] nouveau 0000:02:00.0: DCB outp 01: 01000302 00020030
  263. [   47.964304] [drm] nouveau 0000:02:00.0: DCB outp 02: 04011380 00000000
  264. [   47.964392] [drm] nouveau 0000:02:00.0: DCB outp 03: 08011382 00020030
  265. [   47.964480] [drm] nouveau 0000:02:00.0: DCB outp 04: 02022362 00020010
  266. [   47.964568] [drm] nouveau 0000:02:00.0: DCB conn 00: 00001030
  267. [   47.964728] [drm] nouveau 0000:02:00.0: DCB conn 01: 00010130
  268. [   47.964865] [drm] nouveau 0000:02:00.0: DCB conn 02: 00002261
  269. [   47.964999] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0x6E50
  270. [   47.972726] firewire_ohci 0000:01:08.2: >added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
  271. [   47.985101] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0x7550
  272. [   47.992876] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0x8A4D
  273. [   47.992992] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0x8A57
  274. [   47.993161] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0x8C36
  275. [   47.993275] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0x8C9B
  276. [   48.013220] [drm] nouveau 0000:02:00.0: 0x8C9B: Condition still not met after 20ms, skipping following opcodes
  277. [   48.016726] [TTM] Zone  kernel: Available graphics memory: 406196 kiB
  278. [   48.016814] [TTM] Zone highmem: Available graphics memory: 4143608 kiB
  279. [   48.016901] [TTM] Initializing pool allocator
  280. [   48.016985] [TTM] Initializing DMA pool allocator
  281. [   48.017076] [drm] nouveau 0000:02:00.0: Detected 2048MiB VRAM (GDDR5)
  282. [   48.018190] [drm] nouveau 0000:02:00.0: 512 MiB GART (aperture)
  283. [   48.021960] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
  284. [   48.022055] [drm] No driver support for vblank timestamp query.
  285. [   48.027304] [drm] nouveau 0000:02:00.0: 3 available performance level(s)
  286. [   48.027400] [drm] nouveau 0000:02:00.0: 0: core 50MHz shader 101MHz memory 135MHz voltage 875mV
  287. [   48.027520] [drm] nouveau 0000:02:00.0: 1: core 405MHz shader 810MHz memory 324MHz voltage 912mV
  288. [   48.027643] [drm] nouveau 0000:02:00.0: 3: core 865MHz shader 1730MHz memory 2004MHz voltage 1012mV-1125mV
  289. [   48.027768] [drm] nouveau 0000:02:00.0: c: core 50MHz shader 101MHz memory 135MHz voltage 875mV fanspeed 40%
  290. [   48.030655] [drm] nouveau 0000:02:00.0: MM: using COPY0 for buffer copies
  291. [   48.215920] [drm] nouveau 0000:02:00.0: allocated 1680x1050 fb: 0x140000, bo f7570c00
  292. [   48.216112] fbcon: nouveaufb (fb0) is primary device
  293. [   48.244177] Console: switching to colour frame buffer device 210x65
  294. [   48.254139] fb0: nouveaufb frame buffer device
  295. [   48.254187] drm: registered panic notifier
  296. [   48.254234] [drm] Initialized nouveau 1.0.0 20120316 for 0000:02:00.0 on minor 0
  297. [   48.298729] scsi[9]: scanning scsi channel 1 [virtual] for logical drives
  298. [   48.299453] scsi 9:1:0:0: >Direct-Access     MegaRAID LD 0 RAID5    4G 713G PQ: 0 ANSI: 2
  299. [   48.299943] scsi 9:1:1:0: >Direct-Access     MegaRAID LD 1 RAID5 1000M 713G PQ: 0 ANSI: 2
  300. [   48.300390] scsi 9:1:2:0: >Direct-Access     MegaRAID LD 2 RAID5  605G 713G PQ: 0 ANSI: 2
  301. [   48.306231] sd 9:1:0:0: >[sdb] 8192000 512-byte logical blocks: (4.19 GB/3.90 GiB)
  302. [   48.306255] sd 9:1:0:0: >[sdb] Write Protect is off
  303. [   48.306261] sd 9:1:0:0: >[sdb] Mode Sense: 00 00 00 00
  304. [   48.306268] sd 9:1:0:0: >[sdb] Asking for cache data failed
  305. [   48.306275] sd 9:1:0:0: >[sdb] Assuming drive cache: write through
  306. [   48.306398] sd 9:1:0:0: >Attached scsi generic sg2 type 0
  307. [   48.306474] sd 9:1:0:0: >[sdb] Asking for cache data failed
  308. [   48.306481] sd 9:1:0:0: >[sdb] Assuming drive cache: write through
  309. [   48.306759] sd 9:1:1:0: >[sdc] 2048000 512-byte logical blocks: (1.04 GB/1000 MiB)
  310. [   48.306775] sd 9:1:1:0: >[sdc] Write Protect is off
  311. [   48.306781] sd 9:1:1:0: >[sdc] Mode Sense: 00 00 00 00
  312. [   48.306788] sd 9:1:1:0: >[sdc] Asking for cache data failed
  313. [   48.306794] sd 9:1:1:0: >[sdc] Assuming drive cache: write through
  314. [   48.306898] sd 9:1:1:0: >Attached scsi generic sg3 type 0
  315. [   48.306962] sd 9:1:1:0: >[sdc] Asking for cache data failed
  316. [   48.306968] sd 9:1:1:0: >[sdc] Assuming drive cache: write through
  317. [   48.307104] sd 9:1:2:0: >Attached scsi generic sg4 type 0
  318. [   48.307197] sd 9:1:2:0: >[sdd] 1240027136 512-byte logical blocks: (634 GB/591 GiB)
  319. [   48.307211] sd 9:1:2:0: >[sdd] Write Protect is off
  320. [   48.307217] sd 9:1:2:0: >[sdd] Mode Sense: 00 00 00 00
  321. [   48.307224] sd 9:1:2:0: >[sdd] Asking for cache data failed
  322. [   48.307230] sd 9:1:2:0: >[sdd] Assuming drive cache: write through
  323. [   48.308060] sd 9:1:2:0: >[sdd] Asking for cache data failed
  324. [   48.308069] sd 9:1:2:0: >[sdd] Assuming drive cache: write through
  325. [   48.349014]  sdd: sdd1
  326. [   48.349525] sd 9:1:2:0: >[sdd] Asking for cache data failed
  327. [   48.349540] sd 9:1:2:0: >[sdd] Assuming drive cache: write through
  328. [   48.349547] sd 9:1:2:0: >[sdd] Attached SCSI disk
  329. [   48.354747]  sdb: sdb1
  330. [   48.355345] sd 9:1:0:0: >[sdb] Asking for cache data failed
  331. [   48.355355] sd 9:1:0:0: >[sdb] Assuming drive cache: write through
  332. [   48.355362] sd 9:1:0:0: >[sdb] Attached SCSI disk
  333. [   48.355925]  sdc: sdc1
  334. [   48.356577] sd 9:1:1:0: >[sdc] Asking for cache data failed
  335. [   48.356587] sd 9:1:1:0: >[sdc] Assuming drive cache: write through
  336. [   48.356595] sd 9:1:1:0: >[sdc] Attached SCSI disk
  337. [   48.488417] firewire_core 0000:01:08.2: created device fw0: GUID 00023c0021022934, S400
  338. [   48.511203] xor: automatically using best checksumming function:
  339. [   48.548283]    pIII_sse  : 11051.000 MB/sec
  340. [   48.548867] device-mapper: dm-raid45: initialized v0.2594b
  341. [   49.696156] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  342. [   87.345575] Adding 1020092k swap on /dev/sdc1.  Priority:-1 extents:1 across:1020092k
  343. [   87.359839] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  344. [   87.421946] udevd[3083]: starting version 175
  345. [   87.615621] Bluetooth: Core ver 2.16
  346. [   87.615643] NET: Registered protocol family 31
  347. [   87.615645] Bluetooth: HCI device and connection manager initialized
  348. [   87.615647] Bluetooth: HCI socket layer initialized
  349. [   87.615648] Bluetooth: L2CAP socket layer initialized
  350. [   87.615652] Bluetooth: SCO socket layer initialized
  351. [   87.649912] Bluetooth: RFCOMM TTY layer initialized
  352. [   87.649919] Bluetooth: RFCOMM socket layer initialized
  353. [   87.649920] Bluetooth: RFCOMM ver 1.11
  354. [   87.654813] lp: driver loaded but no devices found
  355. [   87.667376] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  356. [   87.667380] Bluetooth: BNEP filters: protocol multicast
  357. [   87.680084] i2c i2c-12: >nForce2 SMBus adapter at 0x2d00
  358. [   87.680091] ACPI Warning: 0x00002e00-0x00002e3f SystemIO conflicts with Region \SM00 1 (20120320/utaddress-251)
  359. [   87.680096] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  360. [   87.687892] ppdev: user-space parallel port driver
  361. [   87.763869] k10temp 0000:00:18.3: >unreliable CPU thermal sensor; monitoring disabled
  362. [   87.974695] gameport gameport0: >EMU10K1 is pci0000:01:08.1/gameport0, io 0xc880, speed 1065kHz
  363. [   88.022344] microcode: CPU0: patch_level=0x01000065
  364. [   88.037185] Linux video capture interface: v2.00
  365. [   88.042662] gspca_main: v2.14.0 registered
  366. [   88.056209] gspca_main: gspca_zc3xx-2.14.0 probing 046d:08d7
  367. [   88.079449] device-mapper: multipath: version 1.4.0 loaded
  368. [   88.154897] kvm: Nested Virtualization enabled
  369. [   88.154902] kvm: Nested Paging enabled
  370. [   88.170074] init: failsafe main process (3374) killed by TERM signal
  371. [   88.200774] microcode: failed to load file amd-ucode/microcode_amd.bin
  372. [   88.200790] microcode: CPU1: patch_level=0x01000065
  373. [   88.204025] microcode: failed to load file amd-ucode/microcode_amd.bin
  374. [   88.204372] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
  375. [   88.662928] 2:1:1 : no or invalid class specific endpoint descriptor
  376. [   88.673667] 2:2:1 : no or invalid class specific endpoint descriptor
  377. [   88.784054] snd_hda_intel 0000:00:07.0: >power state changed by ACPI to D0
  378. [   88.784060] snd_hda_intel 0000:00:07.0: >power state changed by ACPI to D0
  379. [   88.784209] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
  380. [   88.784213] hda_intel: Disabling MSI
  381. [   88.784237] snd_hda_intel 0000:00:07.0: >setting latency timer to 64
  382. [   88.788836] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 17
  383. [   88.894541] sky2 0000:04:00.0: >eth0: enabling interface
  384. [   88.894996] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  385. [   88.895474] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  386. [   89.566098] input: gspca_zc3xx as /devices/pci0000:00/0000:00:04.0/usb4/4-2/input/input5
  387. [   89.566404] usbcore: registered new interface driver gspca_zc3xx
  388. [   89.570186] usbcore: registered new interface driver snd-usb-audio
  389. [   90.820961] [drm] nouveau 0000:02:00.0: 906e not supported yet
  390. [   91.143219] input: HDA NVidia Line as /devices/pci0000:00/0000:00:07.0/sound/card0/input6
  391. [   91.143353] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input7
  392. [   91.143441] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input8
  393. [   91.143521] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input9
  394. [   91.143598] input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:07.0/sound/card0/input10
  395. [   91.143674] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:07.0/sound/card0/input11
  396. [   91.143752] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:07.0/sound/card0/input12
  397. [   91.143830] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:07.0/sound/card0/input13
  398. [   91.144847] ACPI: PCI Interrupt Link [LN0B] enabled at IRQ 16
  399. [   91.144852] hda_intel: Disabling MSI
  400. [   91.144870] hda-intel: 0000:02:00.1: Handle VGA-switcheroo audio client
  401. [   91.404596] sky2 0000:04:00.0: >eth0: Link is up at 1000 Mbps, full duplex, flow control both
  402. [   91.404789] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  403. [   92.030762] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:10.0/0000:02:00.1/sound/card4/input14
  404. [   92.030902] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:10.0/0000:02:00.1/sound/card4/input15
  405. [   92.031016] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:10.0/0000:02:00.1/sound/card4/input16
  406. [   92.031095] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:10.0/0000:02:00.1/sound/card4/input17
  407. [   92.297830] init: plymouth-stop pre-start process (4731) terminated with status 1
  408. [   99.620612] [drm] nouveau 0000:02:00.0: PMFB0_SUBP0: 0x037f0000
  409. [   99.620619] [drm] nouveau 0000:02:00.0: PMFB0_SUBP1: 0x037f0040
  410. [   99.620624] [drm] nouveau 0000:02:00.0: PMFB1_SUBP0: 0x037f0040
  411. [   99.620628] [drm] nouveau 0000:02:00.0: PMFB1_SUBP1: 0x037f0000
  412. [   99.620631] [drm] nouveau 0000:02:00.0: PMFB2_SUBP0: 0x037f0000
  413. [   99.620635] [drm] nouveau 0000:02:00.0: PMFB2_SUBP1: 0x037f0040
  414. [  112.834872] [drm] nouveau 0000:02:00.0: 906e not supported yet
  415. [  118.546853] [drm] nouveau 0000:02:00.0: PFIFO: unknown status 0x40000000
  416. [  172.641720] kjournald starting.  Commit interval 5 seconds
  417. [  172.641943] EXT3-fs (sdd1): warning: checktime reached, running e2fsck is recommended
  418. [  172.652398] EXT3-fs (sdd1): using internal journal
  419. [  172.652401] EXT3-fs (sdd1): mounted filesystem with ordered data mode
  420. [  326.674833] [drm] nouveau 0000:02:00.0: PFIFO: unknown status 0x40000000
  421. [  326.691155] [drm] nouveau 0000:02:00.0: PFIFO: unknown status 0x40000000
  422. [  665.621488] Btrfs loaded
  423. [  665.648977] JFS: nTxBlock = 8192, nTxLock = 65536
  424. [  665.689308] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
  425. [  758.924254] [drm] nouveau 0000:02:00.0: PFIFO: unknown status 0x40000000
RAW Paste Data
Top