Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 4.14.94-gfc4856387a88 (mangd1ng@mesl) (Android (5166481 based on r346389b) clang version 8.0.6 (https://android.googlesource.com/toolchain/clang b55f2d4ebfd35bf643d27dbca1bb228957008617) (https://android.googlesource.com/toolchain/llvm dfe553c721f995b34e6608bd6039cce877e7bb1b) (based on LLVM 8.0.6svn)) #1 SMP PREEMPT Thu Apr 2 18:20:59 KST 2020
- [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
- [ 0.000000] Machine model: HiKey960
- [ 0.000000] efi: Getting EFI parameters from FDT:
- [ 0.000000] efi: EFI v2.60 by EDK II
- [ 0.000000] efi: MEMATTR=0xbe31a698
- [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000016c00000, size 64 MiB
- [ 0.000000] OF: reserved mem: initialized node fastboot-cma-mem, compatible id shared-dma-pool
- [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000020c00000, size 64 MiB
- [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
- [ 0.000000] On node 0 totalpages: 1038903
- [ 0.000000] DMA zone: 14185 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 907831 pages, LIFO batch:31
- [ 0.000000] Normal zone: 2048 pages used for memmap
- [ 0.000000] Normal zone: 131072 pages, LIFO batch:31
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.1 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: Trusted OS migration not required
- [ 0.000000] psci: SMC Calling Convention v1.1
- [ 0.000000] random: get_random_bytes called from start_kernel+0x8c/0x46c with crng_init=0
- [ 0.000000] percpu: Embedded 23 pages/cpu @ffffffc21fee2000 s55960 r8192 d30056 u94208
- [ 0.000000] pcpu-alloc: s55960 r8192 d30056 u94208 alloc=23*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
- [ 0.000000] Speculative Store Bypass Disable mitigation not required
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1022670
- [ 0.000000] Kernel command line: androidboot.hardware=hikey960 firmware_class.path=/vendor/firmware loglevel=15 efi=noruntime overlay_mgr.overlay_dt_entry=hardware_cfg_enable_android_fstab buildvariant=userdebug console=ttyAMA6 androidboot.serialno=3BE06D8D0062652D initrd=0x7C00000,0x17E214
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.000000] software IO TLB: mapped [mem 0xdbfff000-0xdffff000] (64MB)
- [ 0.000000] Memory: 3837704K/4155612K available (13948K kernel code, 1384K rwdata, 4572K rodata, 3136K init, 910K bss, 186836K reserved, 131072K cma-reserved)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
- [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
- [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008e20000 ( 13952 KB)
- [ 0.000000] .rodata : 0xffffff8008e20000 - 0xffffff80092a0000 ( 4608 KB)
- [ 0.000000] .init : 0xffffff80092a0000 - 0xffffff80095b0000 ( 3136 KB)
- [ 0.000000] .data : 0xffffff80095b0000 - 0xffffff800970a200 ( 1385 KB)
- [ 0.000000] .bss : 0xffffff800970a200 - 0xffffff80097eddf8 ( 911 KB)
- [ 0.000000] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB)
- [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
- [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
- [ 0.000000] 0xffffffbf00000000 - 0xffffffbf08800000 ( 136 MB actual)
- [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc220000000 ( 8704 MB)
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] \x09RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
- [ 0.000000] \x09Tasks RCU enabled.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GIC: Using split EOI/Deactivate mode
- [ 0.000000] arch_timer: cp15 timer(s) running at 1.92MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1c570327e, max_idle_ns: 1763180809505 ns
- [ 0.000004] sched_clock: 56 bits at 1920kHz, resolution 520ns, wraps every 4398046510977ns
- [ 0.000097] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58334160866034 ns
- [ 0.000704] Console: colour dummy device 80x25
- [ 0.000734] Calibrating delay loop (skipped), value calculated using timer frequency.. 3.84 BogoMIPS (lpj=7680)
- [ 0.000746] pid_max: default: 32768 minimum: 301
- [ 0.000868] Security Framework initialized
- [ 0.000879] SELinux: Initializing.
- [ 0.000928] SELinux: Starting in permissive mode
- [ 0.001028] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.001046] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.016048] ASID allocator initialised with 32768 entries
- [ 0.024025] Hierarchical SRCU implementation.
- [ 0.032873] EFI runtime services will be disabled.
- [ 0.040065] smp: Bringing up secondary CPUs ...
- [ 0.080592] Detected VIPT I-cache on CPU1
- [ 0.080681] CPU1: Booted secondary processor [410fd034]
- [ 0.120508] Detected VIPT I-cache on CPU2
- [ 0.120541] CPU2: Booted secondary processor [410fd034]
- [ 0.160523] Detected VIPT I-cache on CPU3
- [ 0.160546] CPU3: Booted secondary processor [410fd034]
- [ 0.214326] CPU features: enabling workaround for ARM erratum 858921
- [ 0.214332] Detected VIPT I-cache on CPU4
- [ 0.214339] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU4: 0x00000000101122
- [ 0.214346] CPU features: Unsupported CPU feature variation detected.
- [ 0.214357] arch_timer: Enabling local workaround for ARM erratum 858921
- [ 0.214366] arch_timer: CPU4: Trapping CNTVCT access
- [ 0.214372] CPU4: Booted secondary processor [410fd091]
- [ 0.264787] Detected VIPT I-cache on CPU5
- [ 0.264792] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU5: 0x00000000101122
- [ 0.264802] arch_timer: Enabling local workaround for ARM erratum 858921
- [ 0.264807] arch_timer: CPU5: Trapping CNTVCT access
- [ 0.264811] CPU5: Booted secondary processor [410fd091]
- [ 0.316846] Detected VIPT I-cache on CPU6
- [ 0.316852] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU6: 0x00000000101122
- [ 0.316861] arch_timer: Enabling local workaround for ARM erratum 858921
- [ 0.316866] arch_timer: CPU6: Trapping CNTVCT access
- [ 0.316870] CPU6: Booted secondary processor [410fd091]
- [ 0.368900] Detected VIPT I-cache on CPU7
- [ 0.368905] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU7: 0x00000000101122
- [ 0.368914] arch_timer: Enabling local workaround for ARM erratum 858921
- [ 0.368919] arch_timer: CPU7: Trapping CNTVCT access
- [ 0.368923] CPU7: Booted secondary processor [410fd091]
- [ 0.368995] smp: Brought up 1 node, 8 CPUs
- [ 0.369045] SMP: Total of 8 processors activated.
- [ 0.369053] CPU features: detected feature: 32-bit EL0 Support
- [ 0.369057] CPU features: detected feature: Kernel page table isolation (KPTI)
- [ 0.372941] CPU: All CPU(s) started at EL2
- [ 0.372971] alternatives: patching kernel code
- [ 0.373245] CPU7: update max cpu_capacity 1024
- [ 0.379692] Registered cp15_barrier emulation handler
- [ 0.379706] Registered setend emulation handler
- [ 0.379801] CPU4: update max cpu_capacity 1024
- [ 0.379890] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.379902] futex hash table entries: 2048 (order: 6, 262144 bytes)
- [ 0.381395] xor: measuring software checksum speed
- [ 0.420759] 8regs : 5022.000 MB/sec
- [ 0.460803] 8regs_prefetch: 3530.000 MB/sec
- [ 0.500839] 32regs : 4338.000 MB/sec
- [ 0.540852] 32regs_prefetch: 5340.000 MB/sec
- [ 0.540856] xor: using function: 32regs_prefetch (5340.000 MB/sec)
- [ 0.540869] pinctrl core: initialized pinctrl subsystem
- [ 0.541559] DMI not present or invalid.
- [ 0.541783] NET: Registered protocol family 16
- [ 0.542007] schedtune: configured to support 5 boost groups
- [ 0.542954] cpuidle: using governor ladder
- [ 0.542984] cpuidle: using governor menu
- [ 0.543082] vdso: 2 pages (1 code @ ffffff8008e27000, 1 data @ ffffff80095b4000)
- [ 0.543090] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.543727] DMA: preallocated 256 KiB pool for atomic allocations
- [ 0.543820] Serial: AMBA PL011 UART driver
- [ 0.544379] pstore: using zlib compression
- [ 0.544793] console [pstore-1] enabled
- [ 0.544798] pstore: Registered ramoops as persistent store backend
- [ 0.544805] ramoops: attached 0x100000@0x20a00000, ecc: 0/0
- [ 0.567525] hi3660-mbox e896b000.mailbox: Mailbox enabled
- [ 0.568236] uart-pl011 ffd74000.serial: could not find pctldev for node /soc/pinmux@e896c000/uart3_pmx_func, deferring probe
- [ 0.568365] uart-pl011 fdf01000.serial: could not find pctldev for node /soc/pinmux@e896c000/uart4_pmx_func, deferring probe
- [ 0.568485] uart-pl011 fff32000.serial: could not find pctldev for node /soc/pinmux@e896c000/uart6_pmx_func, deferring probe
- [ 0.585518] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.653048] raid6: int64x1 gen() 1380 MB/s
- [ 0.721068] raid6: int64x1 xor() 759 MB/s
- [ 0.789105] raid6: int64x2 gen() 1692 MB/s
- [ 0.857175] raid6: int64x2 xor() 1001 MB/s
- [ 0.925232] raid6: int64x4 gen() 1881 MB/s
- [ 0.993268] raid6: int64x4 xor() 1092 MB/s
- [ 1.061351] raid6: int64x8 gen() 1764 MB/s
- [ 1.129386] raid6: int64x8 xor() 1040 MB/s
- [ 1.197452] raid6: neonx1 gen() 2025 MB/s
- [ 1.265492] raid6: neonx1 xor() 1920 MB/s
- [ 1.333554] raid6: neonx2 gen() 2980 MB/s
- [ 1.401596] raid6: neonx2 xor() 2801 MB/s
- [ 1.469654] raid6: neonx4 gen() 4036 MB/s
- [ 1.537704] raid6: neonx4 xor() 3637 MB/s
- [ 1.605749] raid6: neonx8 gen() 4435 MB/s
- [ 1.673810] raid6: neonx8 xor() 3478 MB/s
- [ 1.673815] raid6: using algorithm neonx8 gen() 4435 MB/s
- [ 1.673820] raid6: .... xor() 3478 MB/s, rmw enabled
- [ 1.673826] raid6: using neon recovery algorithm
- [ 1.674017] ACPI: Interpreter disabled.
- [ 1.674530] vgaarb: loaded
- [ 1.674842] SCSI subsystem initialized
- [ 1.674983] libata version 3.00 loaded.
- [ 1.675050] ssp-pl022 ffd68000.spi: could not find pctldev for node /soc/pinmux@fff11000/spi2_pmx_func, deferring probe
- [ 1.675073] ssp-pl022 ff3b3000.spi: could not find pctldev for node /soc/pinmux@ff3b6000/spi3_pmx_func, deferring probe
- [ 1.675237] usbcore: registered new interface driver usbfs
- [ 1.675266] usbcore: registered new interface driver hub
- [ 1.675326] usbcore: registered new device driver usb
- [ 1.675369] tcpc_class_init_1.1.1_G
- [ 1.675411] TCPC class init OK
- [ 1.675421] Init Richtek RegMap
- [ 1.675594] i2c_designware ffd71000.i2c: could not find pctldev for node /soc/pinmux@fff11000/i2c0_pmx_func, deferring probe
- [ 1.675615] i2c_designware ffd72000.i2c: could not find pctldev for node /soc/pinmux@fff11000/i2c1_pmx_func, deferring probe
- [ 1.675635] i2c_designware fdf0b000.i2c: could not find pctldev for node /soc/pinmux@fff11000/i2c7_pmx_func, deferring probe
- [ 1.675705] Linux video capture interface: v2.00
- [ 1.676019] dmi: Firmware registration failed.
- [ 1.676028] Registered efivars operations
- [ 1.676105] overlay_mgr: apply hardware_cfg_enable_android_fstab dt entry
- [ 1.676177] overlay_mgr: overlay_0 overlay applied
- [ 1.676528] Advanced Linux Sound Architecture Driver Initialized.
- [ 1.676766] Bluetooth: Core ver 2.22
- [ 1.676791] NET: Registered protocol family 31
- [ 1.676796] Bluetooth: HCI device and connection manager initialized
- [ 1.676804] Bluetooth: HCI socket layer initialized
- [ 1.676811] Bluetooth: L2CAP socket layer initialized
- [ 1.676829] Bluetooth: SCO socket layer initialized
- [ 1.677036] NetLabel: Initializing
- [ 1.677042] NetLabel: domain hash size = 128
- [ 1.677046] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
- [ 1.677080] NetLabel: unlabeled traffic allowed by default
- [ 1.677340] clocksource: Switched to clocksource arch_sys_counter
- [ 1.722230] VFS: Disk quotas dquot_6.6.0
- [ 1.722284] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 1.722543] pnp: PnP ACPI: disabled
- [ 1.727285] NET: Registered protocol family 2
- [ 1.727595] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
- [ 1.727713] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
- [ 1.727997] TCP: Hash tables configured (established 32768 bind 32768)
- [ 1.728075] UDP hash table entries: 2048 (order: 4, 65536 bytes)
- [ 1.728124] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
- [ 1.728302] NET: Registered protocol family 1
- [ 1.728322] PCI: CLS 0 bytes, default 128
- [ 1.728457] Trying to unpack rootfs image as initramfs...
- [ 1.768191] Freeing initrd memory: 1528K
- [ 1.769054] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
- [ 1.769383] kvm [1]: 8-bit VMID
- [ 1.770238] kvm [1]: vgic interrupt IRQ1
- [ 1.770390] kvm [1]: Hyp mode initialized successfully
- [ 1.773158] audit: initializing netlink subsys (disabled)
- [ 1.773265] audit: type=2000 audit(1.763:1): state=initialized audit_enabled=0 res=1
- [ 1.773677] Initialise system trusted keyrings
- [ 1.773771] workingset: timestamp_bits=46 max_order=20 bucket_order=0
- [ 1.774279] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 1.774296] Registering sdcardfs 0.1
- [ 1.774422] fuse init (API version 7.26)
- [ 1.774636] 9p: Installing v9fs 9p2000 file system support
- [ 1.774773] SELinux: Registering netfilter hooks
- [ 1.777382] Key type asymmetric registered
- [ 1.777389] Asymmetric key parser 'x509' registered
- [ 1.777402] io scheduler noop registered
- [ 1.777433] io scheduler cfq registered (default)
- [ 1.777439] io scheduler mq-deadline registered
- [ 1.777444] io scheduler kyber registered
- [ 1.778279] pinctrl-single e896c000.pinmux: 124 pins at pa ffffff800997d000 size 496
- [ 1.778563] pinctrl-single ff37e000.pinmux: 6 pins at pa ffffff8009985000 size 24
- [ 1.778711] pinctrl-single ff3b6000.pinmux: 12 pins at pa ffffff800998d000 size 48
- [ 1.778855] pinctrl-single ff3fd000.pinmux: 6 pins at pa ffffff8009995000 size 24
- [ 1.779033] pinctrl-single fff11000.pinmux: 42 pins at pa ffffff800999d000 size 168
- [ 1.779281] pinctrl-single e896c800.pinmux: 128 pins at pa ffffff80099a5800 size 512
- [ 1.779422] pinctrl-single ff3b6800.pinmux: 6 pins at pa ffffff80099ad800 size 24
- [ 1.779563] pinctrl-single ff3fd800.pinmux: 6 pins at pa ffffff80099b5800 size 24
- [ 1.779701] pinctrl-single ff37e800.pinmux: 6 pins at pa ffffff80099bd800 size 24
- [ 1.779877] pinctrl-single fff11800.pinmux: 47 pins at pa ffffff80099c5800 size 188
- [ 1.780372] pl061_gpio e8a0b000.gpio: PL061 GPIO chip @0x00000000e8a0b000 registered
- [ 1.780622] pl061_gpio e8a0c000.gpio: PL061 GPIO chip @0x00000000e8a0c000 registered
- [ 1.780869] pl061_gpio e8a0d000.gpio: PL061 GPIO chip @0x00000000e8a0d000 registered
- [ 1.781109] pl061_gpio e8a0e000.gpio: PL061 GPIO chip @0x00000000e8a0e000 registered
- [ 1.781370] pl061_gpio e8a0f000.gpio: PL061 GPIO chip @0x00000000e8a0f000 registered
- [ 1.781615] pl061_gpio e8a10000.gpio: PL061 GPIO chip @0x00000000e8a10000 registered
- [ 1.781864] pl061_gpio e8a11000.gpio: PL061 GPIO chip @0x00000000e8a11000 registered
- [ 1.782106] pl061_gpio e8a12000.gpio: PL061 GPIO chip @0x00000000e8a12000 registered
- [ 1.782344] pl061_gpio e8a13000.gpio: PL061 GPIO chip @0x00000000e8a13000 registered
- [ 1.782582] pl061_gpio e8a14000.gpio: PL061 GPIO chip @0x00000000e8a14000 registered
- [ 1.782817] pl061_gpio e8a15000.gpio: PL061 GPIO chip @0x00000000e8a15000 registered
- [ 1.783047] pl061_gpio e8a16000.gpio: PL061 GPIO chip @0x00000000e8a16000 registered
- [ 1.783283] pl061_gpio e8a17000.gpio: PL061 GPIO chip @0x00000000e8a17000 registered
- [ 1.783518] pl061_gpio e8a18000.gpio: PL061 GPIO chip @0x00000000e8a18000 registered
- [ 1.783753] pl061_gpio e8a19000.gpio: PL061 GPIO chip @0x00000000e8a19000 registered
- [ 1.783992] pl061_gpio e8a1a000.gpio: PL061 GPIO chip @0x00000000e8a1a000 registered
- [ 1.784226] pl061_gpio e8a1b000.gpio: PL061 GPIO chip @0x00000000e8a1b000 registered
- [ 1.784455] pl061_gpio e8a1c000.gpio: PL061 GPIO chip @0x00000000e8a1c000 registered
- [ 1.784707] pl061_gpio ff3b4000.gpio: PL061 GPIO chip @0x00000000ff3b4000 registered
- [ 1.784945] pl061_gpio ff3b5000.gpio: PL061 GPIO chip @0x00000000ff3b5000 registered
- [ 1.785178] pl061_gpio e8a1f000.gpio: PL061 GPIO chip @0x00000000e8a1f000 registered
- [ 1.785391] pl061_gpio e8a20000.gpio: PL061 GPIO chip @0x00000000e8a20000 registered
- [ 1.785546] pl061_gpio fff0b000.gpio: PL061 GPIO chip @0x00000000fff0b000 registered
- [ 1.785687] pl061_gpio fff0c000.gpio: PL061 GPIO chip @0x00000000fff0c000 registered
- [ 1.785815] pl061_gpio fff0d000.gpio: PL061 GPIO chip @0x00000000fff0d000 registered
- [ 1.785955] pl061_gpio fff0e000.gpio: PL061 GPIO chip @0x00000000fff0e000 registered
- [ 1.786082] pl061_gpio fff0f000.gpio: PL061 GPIO chip @0x00000000fff0f000 registered
- [ 1.786210] pl061_gpio fff10000.gpio: PL061 GPIO chip @0x00000000fff10000 registered
- [ 1.786331] pl061_gpio fff1d000.gpio: PL061 GPIO chip @0x00000000fff1d000 registered
- [ 1.821387] OF: PCI: host bridge /soc/pcie@f4000000 ranges:
- [ 1.821400] OF: PCI: MEM 0xf6000000..0xf7ffffff -> 0x00000000
- [ 2.827448] kirin-pcie f4000000.pcie: Link Fail
- [ 2.827559] kirin-pcie f4000000.pcie: PCI host bridge to bus 0000:00
- [ 2.827569] pci_bus 0000:00: root bus resource [bus 00-01]
- [ 2.827578] pci_bus 0000:00: root bus resource [mem 0xf6000000-0xf7ffffff] (bus address [0x00000000-0x01ffffff])
- [ 2.827611] pci 0000:00:00.0: [19e5:3660] type 01 class 0x060400
- [ 2.827659] pci 0000:00:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit]
- [ 2.827753] pci 0000:00:00.0: supports D1 D2
- [ 2.827759] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
- [ 2.828032] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-01] (conflicts with (null) [bus 00-01])
- [ 2.828075] pci 0000:00:00.0: BAR 0: assigned [mem 0xf6000000-0xf6ffffff 64bit]
- [ 2.828094] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
- [ 2.828334] pcieport 0000:00:00.0: Signaling PME with IRQ 69
- [ 2.828486] pcieport 0000:00:00.0: AER enabled with IRQ 69
- [ 2.831393] k3-dma fdf30000.dma: initialized
- [ 2.831482] k3-dma e804b000.dma-controller: dma-avail-chan doesn't exist, considering all as available.
- [ 2.833315] k3-dma e804b000.dma-controller: initialized
- [ 2.833661] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- [ 2.834745] [drm] +.
- [ 2.834761] [drm] wait for external HDMI bridge driver.
- [ 2.834956] mali e82c0000.mali: Continuing without Mali regulator control
- [ 2.835255] mali e82c0000.mali: GPU identified as 0x0 arch 6.0.10 r0p0 status 2
- [ 2.835787] mali e82c0000.mali: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
- [ 2.835887] Error reading temperature for gpu thermal zone: -22
- [ 2.836070] mali e82c0000.mali: Probed as mali0
- [ 2.841490] brd: module loaded
- [ 2.845598] loop: module loaded
- [ 2.845840] [I/GPIO_HUB] gpio_hub_probe: step in
- [ 2.846001] [I/GPIO_HUB] gpio_hub_init:gpio hub init status:0
- [ 2.847402] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
- [ 2.847411] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vcc-supply regulator, assuming enabled
- [ 2.847419] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
- [ 2.847426] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled
- [ 2.868885] scsi host0: ufshcd
- [ 2.878075] libphy: Fixed MDIO Bus: probed
- [ 2.878082] tun: Universal TUN/TAP device driver, 1.6
- [ 2.878320] PPP generic driver version 2.4.2
- [ 2.878369] PPP BSD Compression module registered
- [ 2.878375] PPP Deflate Compression module registered
- [ 2.878404] PPP MPPE Compression module registered
- [ 2.878456] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
- [ 2.878511] usbcore: registered new interface driver pegasus
- [ 2.878535] usbcore: registered new interface driver rtl8150
- [ 2.878560] usbcore: registered new interface driver r8152
- [ 2.878586] usbcore: registered new interface driver asix
- [ 2.878611] usbcore: registered new interface driver ax88179_178a
- [ 2.878634] usbcore: registered new interface driver cdc_ether
- [ 2.878655] usbcore: registered new interface driver dm9601
- [ 2.878681] usbcore: registered new interface driver CoreChips
- [ 2.878707] usbcore: registered new interface driver smsc75xx
- [ 2.878732] usbcore: registered new interface driver smsc95xx
- [ 2.878755] usbcore: registered new interface driver net1080
- [ 2.878783] usbcore: registered new interface driver plusb
- [ 2.878805] usbcore: registered new interface driver cdc_subset
- [ 2.878828] usbcore: registered new interface driver zaurus
- [ 2.878849] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
- [ 2.878878] usbcore: registered new interface driver cdc_ncm
- [ 2.879085] [USB3][hisi_dwc3_probe]+
- [ 2.879229] [USB3][get_phy_param]eye diagram param: 0x1c466e3
- [ 2.879235] [USB3][get_phy_param]eye diagram host param: 0x1c466e3
- [ 2.879242] [USB3][get_phy_param]usb3_phy_cr_param: 0xb80
- [ 2.879246] [USB3][get_phy_param]usb3_phy_host_cr_param: 0x980
- [ 2.879252] [USB3][get_phy_param]usb3_phy_tx_vboost_lvl: 5
- [ 2.879272] [USB3][get_resource]this is asic platform (fpga flag 0)
- [ 2.879277] [USB3][create_attr_file]+
- [ 2.879318] [USB3][create_attr_file]-
- [ 2.879325] [USB3][hi3660_usb3phy_init]+
- [ 2.905472] [USB3][config_femtophy_param]set hs phy param 0x1c466e3 for device
- [ 2.906128] [USB3][config_femtophy_param]set ss phy rx equalization 0xb80
- [ 2.907032] [USB3][config_femtophy_param]set ss RX_SCOPE_VDCC 0x1
- [ 2.907039] [USB3][config_femtophy_param]set ss phy tx vboost lvl 0x5
- [ 2.907044] [USB3][set_hisi_dwc3_power_flag]set hisi_dwc3_power_flag 1
- [ 2.907048] [USB3][hi3660_usb3phy_init]-
- [ 2.907448] [dwc3_otg_init]+
- [ 2.907457] DWC3_OCFG:\x090x0
- [ 2.907462] DWC3_OCTL:\x090x40
- [ 2.907467] DWC3_OEVT:\x090x80000000
- [ 2.907471] DWC3_OEVTEN:\x090x0
- [ 2.907476] DWC3_OSTS:\x090x19
- [ 2.907480] DWC3_BCFG:\x090x0
- [ 2.907484] DWC3_BCEVT:\x090x0
- [ 2.907489] DWC3_BCEVTEN:\x090x0
- [ 2.907493] [dwc3_otg_init]-
- [ 2.907516] dwc3 ff100000.dwc3: dwc3_host_init if otg, otg will do device_add.
- [ 2.909257] [USB3][hisi_dwc3_wake_lock]usb otg wake lock
- [ 2.909265] [USB3][hisi_dwc3_probe]init state: OFF
- [ 2.909270] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:1
- [ 2.909275] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:1
- [ 2.909280] [USB3][hisi_usb_otg_event]event: 1
- [ 2.909291] [USB3][hisi_dwc3_probe]-
- [ 2.909295] [USB3][event_work]+
- [ 2.909298] [USB3][handle_event][handle_event] type: 1
- [ 2.909300] [dwc3_otg_work]+\x0a evt = 4
- [ 2.909303] [dwc3_otg_stop_peripheral]+
- [ 2.909313] [dwc3_otg_stop_peripheral]-
- [ 2.909317] [dwc3_suspend_device] +
- [ 2.909356] [dwc3_suspend_device] -
- [ 2.909361] [dwc3_otg_work]-
- [ 2.909367] [USB3][hisi_dwc3_wake_unlock]usb otg wake unlock
- [ 2.909373] [USB3][handle_event]hisi usb status: DEVICE -> OFF
- [ 2.909378] [USB3][event_work]-
- [ 2.909614] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 2.909620] ehci-pci: EHCI PCI platform driver
- [ 2.909646] ehci-platform: EHCI generic platform driver
- [ 2.909721] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 2.909733] ohci-pci: OHCI PCI platform driver
- [ 2.909760] ohci-platform: OHCI generic platform driver
- [ 2.909985] usbcore: registered new interface driver cdc_acm
- [ 2.909991] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 2.910021] usbcore: registered new interface driver usb-storage
- [ 2.910072] usbcore: registered new interface driver usbserial
- [ 2.910097] usbcore: registered new interface driver usbserial_generic
- [ 2.910116] usbserial: USB Serial support registered for generic
- [ 2.910141] usbcore: registered new interface driver ftdi_sio
- [ 2.910159] usbserial: USB Serial support registered for FTDI USB Serial Device
- [ 2.910181] usbcore: registered new interface driver option
- [ 2.910201] usbserial: USB Serial support registered for GSM modem (1-port)
- [ 2.910223] usbcore: registered new interface driver pl2303
- [ 2.910243] usbserial: USB Serial support registered for pl2303
- [ 2.910265] usbcore: registered new interface driver qcserial
- [ 2.910283] usbserial: USB Serial support registered for Qualcomm USB modem
- [ 2.910308] usbcore: registered new interface driver usb_serial_simple
- [ 2.910331] usbserial: USB Serial support registered for carelink
- [ 2.910351] usbserial: USB Serial support registered for zio
- [ 2.910369] usbserial: USB Serial support registered for funsoft
- [ 2.910386] usbserial: USB Serial support registered for flashloader
- [ 2.910404] usbserial: USB Serial support registered for google
- [ 2.910422] usbserial: USB Serial support registered for libtransistor
- [ 2.910439] usbserial: USB Serial support registered for vivopay
- [ 2.910457] usbserial: USB Serial support registered for moto_modem
- [ 2.910476] usbserial: USB Serial support registered for motorola_tetra
- [ 2.910493] usbserial: USB Serial support registered for novatel_gps
- [ 2.910510] usbserial: USB Serial support registered for hp4x
- [ 2.910530] usbserial: USB Serial support registered for suunto
- [ 2.910550] usbserial: USB Serial support registered for siemens_mpi
- [ 2.910601] gadgetfs: USB Gadget filesystem, version 24 Aug 2004
- [ 2.910606] [I/hisi_pd] pd_dpm_init
- [ 2.910669] [I/hisi_pd] pd_dpm_probe : +++++++++
- [ 2.910705] [I/hisi_pd] pd_dpm_probe ++++\x0d\x0a\x0d
- [ 2.910877] rt1711h_init (1.1.8_G): initializing...
- [ 2.910893] rt1711h node found...
- [ 2.911029] usbcore: registered new interface driver xpad
- [ 2.911057] usbcore: registered new interface driver usb_acecad
- [ 2.911079] usbcore: registered new interface driver aiptek
- [ 2.911102] usbcore: registered new interface driver gtco
- [ 2.911128] usbcore: registered new interface driver hanwang
- [ 2.911150] usbcore: registered new interface driver kbtab
- [ 2.911565] rtc-pl031 fff04000.rtc: rtc core: registered pl031 as rtc0
- [ 2.911689] i2c /dev entries driver
- [ 2.911859] IR NEC protocol handler initialized
- [ 2.911865] IR RC5(x/sz) protocol handler initialized
- [ 2.911870] IR RC6 protocol handler initialized
- [ 2.911875] IR JVC protocol handler initialized
- [ 2.911879] IR Sony protocol handler initialized
- [ 2.911884] IR SANYO protocol handler initialized
- [ 2.911888] IR Sharp protocol handler initialized
- [ 2.911893] IR MCE Keyboard/mouse protocol handler initialized
- [ 2.911897] IR XMP protocol handler initialized
- [ 2.912764] sp805-wdt e8a06000.watchdog: registration successful
- [ 2.912854] sp805-wdt e8a07000.watchdog: registration successful
- [ 2.912930] device-mapper: uevent: version 1.0.3
- [ 2.912992] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
- [ 2.913113] Bluetooth: HCI UART driver ver 2.3
- [ 2.913121] Bluetooth: HCI UART protocol H4 registered
- [ 2.913151] Bluetooth: HCI UART protocol LL registered
- [ 2.914083] sched-energy: Sched-energy-costs installed from DT
- [ 2.914242] WARN: cpu=4, domain=DIE: incr. energy eff 3915[0]->5078[1]
- [ 2.914252] WARN: cpu=0, domain=DIE: incr. energy eff 11349[0]->11636[1]
- [ 2.915621] sdhci: Secure Digital Host Controller Interface driver
- [ 2.915627] sdhci: Copyright(c) Pierre Ossman
- [ 2.915643] Synopsys Designware Multimedia Card Interface Driver
- [ 2.916182] dwmmc_k3 ff37f000.dwmmc1: 'num-slots' was deprecated.
- [ 2.916195] dwmmc_k3 ff37f000.dwmmc1: fifo-depth property not found, using value of FIFOTH register as default
- [ 2.918485] dwmmc_k3 ff37f000.dwmmc1: IDMAC supports 64-bit address mode.
- [ 2.918579] dwmmc_k3 ff37f000.dwmmc1: Using internal DMA controller.
- [ 2.918592] dwmmc_k3 ff37f000.dwmmc1: Version ID is 270a
- [ 2.918635] dwmmc_k3 ff37f000.dwmmc1: DW MMC controller at irq 59,32 bit host data width,256 deep fifo
- [ 2.918850] dwmmc_k3 ff37f000.dwmmc1: Got CD GPIO
- [ 2.919172] CPU1: update max cpu_capacity 462
- [ 2.937996] CPU5: update max cpu_capacity 1024
- [ 2.940154] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
- [ 2.959752] dwmmc_k3 ff3ff000.dwmmc2: 'num-slots' was deprecated.
- [ 2.959766] dwmmc_k3 ff3ff000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
- [ 2.961402] dwmmc_k3 ff3ff000.dwmmc2: IDMAC supports 64-bit address mode.
- [ 2.961469] dwmmc_k3 ff3ff000.dwmmc2: Using internal DMA controller.
- [ 2.961482] dwmmc_k3 ff3ff000.dwmmc2: Version ID is 270a
- [ 2.961516] dwmmc_k3 ff3ff000.dwmmc2: DW MMC controller at irq 60,32 bit host data width,256 deep fifo
- [ 2.961686] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 2.963222] ledtrig-cpu: registered to indicate activity on CPUs
- [ 2.963331] hidraw: raw HID events driver (C) Jiri Kosina
- [ 2.964822] usbcore: registered new interface driver usbhid
- [ 2.964831] usbhid: USB HID core driver
- [ 2.965110] ashmem: initialized
- [ 2.965473] hisi_ddr_devfreq ddr_devfreq: init success
- [ 2.967240] ufshcd-hi3660 ff3b0000.ufs: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
- [ 2.968262] coresight-etm4x ecc40000.etm: CPU0: ETM v4.0 initialized
- [ 2.968557] coresight-etm4x ecd40000.etm: CPU1: ETM v4.0 initialized
- [ 2.968905] coresight-etm4x ece40000.etm: CPU2: ETM v4.0 initialized
- [ 2.969188] coresight-etm4x ecf40000.etm: CPU3: ETM v4.0 initialized
- [ 2.969497] coresight-etm4x ed440000.etm: CPU4: ETM v4.0 initialized
- [ 2.969848] coresight-etm4x ed540000.etm: CPU5: ETM v4.0 initialized
- [ 2.970141] coresight-etm4x ed640000.etm: CPU6: ETM v4.0 initialized
- [ 2.970426] coresight-etm4x ed740000.etm: CPU7: ETM v4.0 initialized
- [ 2.970645] optee: probing for conduit method from DT.
- [ 2.974297] optee: dynamic shared memory is enabled
- [ 2.974306] optee: initialized driver
- [ 2.974502] usbcore: registered new interface driver snd-usb-audio
- [ 2.975348] hisi_i2s e804f800.hisi_i2s: Registered as hisi_i2s
- [ 2.975535] u32 classifier
- [ 2.975543] Actions configured
- [ 2.975555] Netfilter messages via NETLINK v0.30.
- [ 2.975672] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 2.975781] ctnetlink v0.93: registering with nfnetlink.
- [ 2.976039] xt_time: kernel timezone is -0000
- [ 2.976151] IPv4 over IPsec tunneling driver
- [ 2.976534] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 2.977080] arp_tables: arp_tables: (C) 2002 David S. Miller
- [ 2.977148] Initializing XFRM netlink socket
- [ 2.977227] NET: Registered protocol family 10
- [ 2.978071] Segment Routing with IPv6
- [ 2.978133] mip6: Mobile IPv6
- [ 2.978152] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 2.978792] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
- [ 2.979444] NET: Registered protocol family 17
- [ 2.979464] NET: Registered protocol family 15
- [ 2.979500] Bridge firewalling registered
- [ 2.979686] Bluetooth: RFCOMM TTY layer initialized
- [ 2.979699] Bluetooth: RFCOMM socket layer initialized
- [ 2.979719] Bluetooth: RFCOMM ver 1.11
- [ 2.979733] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 2.979744] Bluetooth: HIDP socket layer initialized
- [ 2.979752] 8021q: 802.1Q VLAN Support v1.8
- [ 2.979870] 9pnet: Installing 9P2000 support
- [ 2.980379] registered taskstats version 1
- [ 2.980388] Loading compiled-in X.509 certificates
- [ 2.982192] Loaded X.509 cert 'Android: 7e4333f9bba00adfe0ede979e28ed1920492b40f'
- [ 2.982560] Btrfs loaded, crc32c=crc32c-generic
- [ 2.989725] ffd74000.serial: ttyAMA3 at MMIO 0xffd74000 (irq = 21, base_baud = 0) is a PL011 rev2
- [ 2.990314] fdf01000.serial: ttyAMA4 at MMIO 0xfdf01000 (irq = 22, base_baud = 0) is a PL011 rev2
- [ 2.990397] serial serial0: tty port ttyAMA4 registered
- [ 2.990607] fff32000.serial: ttyAMA6 at MMIO 0xfff32000 (irq = 23, base_baud = 0) is a PL011 rev2
- [ 2.991755] uart-pl011 fdf01000.serial: DMA channel TX dma0chan7
- [ 2.995299] console [ttyAMA6] enabled
- [ 3.027950] uart-pl011 fdf01000.serial: DMA channel RX dma0chan6
- [ 3.033094] ssp-pl022 ffd68000.spi: ARM PL022 driver, device ID: 0x00041022
- [ 3.074581] ufs final power mode: gear = 3, lane = 2, pwr = 1, rate = 2
- [ 3.080806] ssp-pl022 ffd68000.spi: mapped registers from 0x00000000ffd68000 to ffffff8009e9d000
- [ 3.084810] ufshcd-hi3660 ff3b0000.ufs: set TX_EQUALIZER 3.5db
- [ 3.089675] ssp-pl022 ffd68000.spi: setup for DMA on RX dma0chan0, TX dma0chan1
- [ 3.090206] ssp-pl022 ff3b3000.spi: ARM PL022 driver, device ID: 0x00041022
- [ 3.093661] ufs flash device must set VS_DebugSaveConfigTime 0x10
- [ 3.098531] ssp-pl022 ff3b3000.spi: mapped registers from 0x00000000ff3b3000 to ffffff8009ea5000
- [ 3.106313] ufshcd-hi3660 ff3b0000.ufs: check TX_EQUALIZER DB value lane0 = 0x1
- [ 3.108803] ssp-pl022 ff3b3000.spi: setup for DMA on RX dma0chan2, TX dma0chan3
- [ 3.113822] ufshcd-hi3660 ff3b0000.ufs: TX_EQUALIZER DB value lane1 = 0x1
- [ 3.119828] rt1711_i2c_probe
- [ 3.123661] ufshcd-hi3660 ff3b0000.ufs: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
- [ 3.128511] I2C functionality : OK...
- [ 3.172403] rt_parse_dt
- [ 3.179015] hci-ti serial0-0: Direct firmware load for ti-connectivity/TIInit_11.8.32.bts failed with error -2
- [ 3.179456] ufshcd-hi3660 ff3b0000.ufs: ufshcd_find_max_sup_active_icc_level: Regulator capability was not set, actvIccLevel=0
- [ 3.181189] scsi 0:0:0:49488: Well-known LUN SKhynix H28U62301AMR H109 PQ: 0 ANSI: 6
- [ 3.183204] scsi 0:0:0:49456: Well-known LUN SKhynix H28U62301AMR H109 PQ: 0 ANSI: 6
- [ 3.185475] rt1711h_chipID = 0x2171
- [ 3.185492] regmap_device_register: name = rt1711-4e
- [ 3.185794] scsi 0:0:0:49476: Well-known LUN SKhynix H28U62301AMR H109 PQ: 0 ANSI: 6
- [ 3.188734] scsi 0:0:0:0: Direct-Access SKhynix H28U62301AMR H109 PQ: 0 ANSI: 6
- [ 3.192323] scsi 0:0:0:1: Direct-Access SKhynix H28U62301AMR H109 PQ: 0 ANSI: 6
- [ 3.195095] scsi 0:0:0:2: Direct-Access SKhynix H28U62301AMR H109 PQ: 0 ANSI: 6
- [ 3.197042] scsi 0:0:0:3: Direct-Access SKhynix H28U62301AMR H109 PQ: 0 ANSI: 6
- [ 3.202031] sd 0:0:0:0: [sda] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
- [ 3.202368] sd 0:0:0:0: [sda] Write Protect is off
- [ 3.202374] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10
- [ 3.203053] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 3.210049] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 3.210220] sd 0:0:0:2: [sdc] 2048 4096-byte logical blocks: (8.39 MB/8.00 MiB)
- [ 3.210237] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
- [ 3.210289] sd 0:0:0:2: [sdc] Write Protect is off
- [ 3.210293] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10
- [ 3.210310] sd 0:0:0:1: [sdb] Write Protect is off
- [ 3.210318] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10
- [ 3.210403] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 3.210441] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 3.211158] sd 0:0:0:3: [sdd] 7805952 4096-byte logical blocks: (32.0 GB/29.8 GiB)
- [ 3.211234] hci-ti serial0-0: Falling back to user helper
- [ 3.211640] sd 0:0:0:3: [sdd] Write Protect is off
- [ 3.211647] sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10
- [ 3.212381] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 3.212672] Alternate GPT is invalid, using primary GPT.
- [ 3.212684] sdc: sdc1
- [ 3.213180] random: fast init done
- [ 3.213616] sd 0:0:0:2: [sdc] Attached SCSI disk
- [ 3.214033] sd 0:0:0:1: [sdb] Attached SCSI disk
- [ 3.215216] Alternate GPT is invalid, using primary GPT.
- [ 3.215259] sdd: sdd1 sdd2 sdd3 sdd4 sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 sdd11 sdd12 sdd13
- [ 3.217280] rt_regmap_rt1711-4e: rt register cache data init
- [ 3.218137] sd 0:0:0:3: [sdd] Attached SCSI disk
- [ 6.291921] rt_regmap_rt1711-4e: cache cata init successfully
- [ 6.297807] tcpc_device_register register tcpc device (type_c_port0)
- [ 6.304206] [I/hisi_pd] tcpc_device_register register_pd_wake_unlock_notifier OK
- [ 6.311601] PD Timer number = 37
- [ 6.315511] tcpci_timer_init : init OK
- [ 6.319721] pd_parse_pdata
- [ 6.322444] pd_parse_pdata src pdo data =
- [ 6.326454] pd_parse_pdata 0: 0x00019064
- [ 6.330378] pd_parse_pdata snk pdo data =
- [ 6.334386] pd_parse_pdata 0: 0x000190c8
- [ 6.338306] pd_parse_pdata 1: 0x0002d0c8
- [ 6.342229] pd_parse_pdata id vdos data =
- [ 6.346236] pd_parse_pdata 0: 0xd00029cf
- [ 6.350157] pd_parse_pdata 1: 0x00000000
- [ 6.354078] pd_parse_pdata 2: 0x00010000
- [ 6.358000] dpm_caps: local_dr_power
- [ 6.361573] dpm_caps: local_dr_data
- [ 6.365056] dpm_caps: local_ext_power
- [ 6.368717] dpm_caps: local_usb_comm
- [ 6.372290] dpm_caps: local_usb_suspend
- [ 6.376123] dpm_caps: local_high_cap
- [ 6.379696] dpm_caps: local_give_back
- [ 6.383356] dpm_caps: local_no_suspend
- [ 6.387103] dpm_caps: local_vconn_supply
- [ 6.391024] dpm_caps: attemp_discover_cable_dfp
- [ 6.395552] dpm_caps: attemp_enter_dp_mode
- [ 6.399646] dpm_caps: attemp_discover_cable
- [ 6.403827] dpm_caps: attemp_discover_id
- [ 6.407748] dpm_caps: pr_reject_as_source
- [ 6.411755] dpm_caps: pr_reject_as_sink
- [ 6.415589] dpm_caps: pr_check_gp_source
- [ 6.419509] dpm_caps: pr_check_gp_sink
- [ 6.423256] dpm_caps: dr_reject_as_dfp
- [ 6.427002] dpm_caps: dr_reject_as_ufp
- [ 6.430749] dpm_caps: snk_prefer_low_voltage
- [ 6.435016] dpm_caps: snk_ignore_mismatch_current
- [ 6.439719] dpm_caps = 0xc010c10b
- [ 6.443032] [I/hisi_pd] PE:pd_core_init\x0d
- [ 6.451477] rt1711_init_alert name = type_c_port0
- [ 6.456217] rt1711_init_alert gpio # = 291
- [ 6.460328] GPIO requested...
- [ 6.463331] rt1711_init_alert : IRQ number = 105
- [ 6.467949] rt1711_init_alert : irq initialized...
- [ 6.473633] IRQF_NO_THREAD Test\x0d
- [ 6.510070] [I/hisi_pd] TPC-I:typec_init: DRP\x0d
- [ 6.516758] [I/GPIO_HUB] gpio_hub_change_typec_power: set typec vbus gpio to 0
- [ 6.524012] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:1
- [ 6.529770] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:1
- [ 6.535873] [E/GPIO_HUB] gpio_hub_switch_to_hub: switch to hub
- [ 6.541715] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:2
- [ 6.547504] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:2
- [ 6.553599] [USB3][hisi_usb_otg_event]event: 2
- [ 6.558076] [I/hisi_pd] TPC-I:** Unattached.SNK\x0d
- [ 6.558286] [USB3][event_work]+
- [ 6.562700] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!+++++++++++
- [ 6.562703] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!-----------
- [ 6.564065] tcpc_device_irq_enable : tcpc irq enable OK!
- [ 6.565084] [I/hisi_pd] TPC-I:[CC_Alert] 5/0\x0d
- [ 6.565095] [I/hisi_pd] TPC-I:** AttachWait.SNK\x0d
- [ 6.565894] [USB3][handle_event][handle_event] type: 2
- [ 6.573314] rt1711_i2c_probe probe OK!
- [ 6.580686] [USB3][set_vbus_power]set port power 1
- [ 6.586598] adv7511 1-0039: 1-0039 supply avdd not found, using dummy regulator
- [ 6.590357] [dwc3_otg_work]+\x0a evt = 2
- [ 6.590361] [dwc3_resume_device] +
- [ 6.595094] adv7511 1-0039: 1-0039 supply dvdd not found, using dummy regulator
- [ 6.600315] [dwc3_resume_device] -
- [ 6.603888] adv7511 1-0039: 1-0039 supply pvdd not found, using dummy regulator
- [ 6.608658] [dwc3_otg_start_host]+
- [ 6.608928] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 6.616001] adv7511 1-0039: 1-0039 supply a2vdd not found, using dummy regulator
- [ 6.621040] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
- [ 6.624495] adv7511 1-0039: 1-0039 supply v3p3 not found, using dummy regulator
- [ 6.632615] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000000000010010
- [ 6.683175] xhci-hcd xhci-hcd.0.auto: irq 102, io mem 0xff100000
- [ 6.685655] [I/hisi_pd] TPC-I:[CC_Change] 5/0\x0d
- [ 6.689284] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 6.693667] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!+++++++++++
- [ 6.693674] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!-----------
- [ 6.693689] [I/GPIO_HUB] gpio_hub_power_off: gpio hub hub vbus no power set success
- [ 6.693700] [I/GPIO_HUB] gpio_hub_change_typec_power: typec power no change
- [ 6.700567] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 6.701741] [drm] +.
- [ 6.702181] [drm] +.
- [ 6.702306] [drm] +.
- [ 6.702346] [drm] +.
- [ 6.702455] [drm] dss irq = 68.
- [ 6.702479] [drm] dss_pri_clk:[400000000]->[400000000].
- [ 6.702549] [drm] dss_pxl0_clk:[144000000]->[144000000].
- [ 6.702579] [drm] -.
- [ 6.702581] [drm] +.
- [ 6.702649] [drm] host attach, client name=[adv7533], id=0
- [ 6.702768] [drm] -.
- [ 6.702790] kirin-drm e8600000.dpe: bound e8601000.dsi (ops dsi_ops)
- [ 6.702793] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 6.702795] [drm] No driver support for vblank timestamp query.
- [ 6.703217] [drm] client change to HDMI
- [ 6.703218] [drm] cma_init!!!!!!
- [ 6.703220] [drm] -.
- [ 6.703383] [drm] Initialized kirin 1.0.0 20170309 for e8600000.dpe on minor 0
- [ 6.703386] [drm] Initialized kirin 1.0.0 20170309 on minor 0
- [ 6.703387] [drm] -.
- [ 6.703388] [drm] -.
- [ 6.703672] dwmmc_k3 ff3ff000.dwmmc2: 'num-slots' was deprecated.
- [ 6.703676] dwmmc_k3 ff3ff000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
- [ 6.705358] dwmmc_k3 ff3ff000.dwmmc2: IDMAC supports 64-bit address mode.
- [ 6.705404] dwmmc_k3 ff3ff000.dwmmc2: Using internal DMA controller.
- [ 6.705411] dwmmc_k3 ff3ff000.dwmmc2: Version ID is 270a
- [ 6.705425] dwmmc_k3 ff3ff000.dwmmc2: DW MMC controller at irq 60,32 bit host data width,128 deep fifo
- [ 6.705534] mmc_host mmc1: card is non-removable.
- [ 6.707942] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:3
- [ 6.715730] usb usb1: Product: xHCI Host Controller
- [ 6.722996] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:3
- [ 6.729959] usb usb1: Manufacturer: Linux 4.14.94-gfc4856387a88 xhci-hcd
- [ 6.729965] usb usb1: SerialNumber: xhci-hcd.0.auto
- [ 6.730286] hub 1-0:1.0: USB hub found
- [ 6.737229] [USB3][hisi_usb_otg_event]event: 3
- [ 6.739509] hub 1-0:1.0: 1 port detected
- [ 6.741798] [E/GPIO_HUB] gpio_hub_switch_to_typec: switch to typec
- [ 6.744110] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 6.746146] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:0
- [ 6.749279] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
- [ 6.754508] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:0
- [ 6.759813] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
- [ 6.762005] [USB3][hisi_usb_otg_event]event: 0
- [ 6.764283] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 6.769739] [USB3][hisi_dwc3_wake_lock]usb otg wake lock
- [ 6.769744] [USB3][hisi_usb_otg_event]schedule event_work wait:0]
- [ 6.769764] [I/hisi_pd] TPC-I:** Attached.SNK\x0d
- [ 6.772052] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
- [ 6.778372] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!+++++++++++
- [ 6.784977] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 6.784980] usb usb2: Product: xHCI Host Controller
- [ 6.790901] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!-----------
- [ 6.792715] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=3,+++
- [ 6.794988] usb usb2: Manufacturer: Linux 4.14.94-gfc4856387a88 xhci-hcd
- [ 6.798043] [I/hisi_pd] pd_dpm_report_pd_sink_vbus : Sink 5000 mV, 500 mA
- [ 6.800216] usb usb2: SerialNumber: xhci-hcd.0.auto
- [ 6.807441] [E/hisi_pd] pd_dpm_vbus_notifier_call: pd_dpm_vbus_notifier_call!!!,++++
- [ 6.807444] [I/hisi_pd] TPC-I:Attached-> SINK\x0d
- [ 6.807447] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=7,+++
- [ 6.807450] [I/hisi_pd] pd_dpm_set_typec_state = 2
- [ 6.807453] [I/hisi_pd] pd_dpm_set_cc_orientation cc_orientation =0
- [ 6.807463] [I/hisi_pd] [TCPC-I]usb_port_attached\x0d
- [ 6.813532] hub 2-0:1.0: USB hub found
- [ 6.815518] [I/hisi_pd] pd_dpm_report_device_attach \x0d
- [ 6.817771] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
- [ 6.824310] hub 2-0:1.0: 1 port detected
- [ 6.854066] hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: no source widget found for Playback
- [ 6.861779] [dwc3_otg_start_host]-
- [ 6.866363] hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: Failed to add route Playback -> direct -> TX
- [ 6.872103] [dwc3_otg_work]-
- [ 6.872107] [USB3][handle_event]hisi usb_status: OFF -> HOST
- [ 6.872113] [USB3][handle_event][handle_event] type: 3
- [ 6.877346] hisi_i2s e804f800.hisi_i2s: Failed to get DMA channel capabilities, falling back to period counting: -6
- [ 6.883088] [USB3][set_vbus_power]set port power 0
- [ 6.889802] asoc-simple-card soc:sound: i2s-hifi <-> e804f800.hisi_i2s mapping ok
- [ 6.894665] [I/hisi_pd] pd_dpm_report_bc12 : PD_WAKE_UNLOCK
- [ 6.898424] asoc-simple-card soc:sound: ASoC: no DMI vendor name!
- [ 6.902846] [I/hisi_pd] pd_dpm_report_bc12 : event (4)
- [ 6.907401] otg_wakelock_init: No USB transceiver found
- [ 6.912941] [E/hisi_pd] pd_dpm_vbus_notifier_call: pd_dpm_vbus_notifier_call!!!,++++
- [ 6.912944] [dwc3_otg_work]+\x0a evt = 1
- [ 6.912946] [dwc3_otg_stop_host]+
- [ 6.913007] dwmmc_k3 ff3ff000.dwmmc2: card claims to support voltages below defined range
- [ 6.918731] input: keys as /devices/platform/keys/input/input0
- [ 6.924200] xhci-hcd xhci-hcd.0.auto: remove, state 1
- [ 6.924717] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
- [ 6.927563] mmc1: new SDIO card at address 0001
- [ 6.927983] wl18xx_driver wl18xx.2.auto: Direct firmware load for ti-connectivity/wl1271-nvs.bin failed with error -2
- [ 6.927985] wl18xx_driver wl18xx.2.auto: Falling back to user helper
- [ 6.937922] rtc-pl031 fff04000.rtc: setting system clock to 1970-01-01 00:19:14 UTC (1154)
- [ 6.944533] usb usb2: USB disconnect, device number 1
- [ 6.949153] ALSA device list:
- [ 6.957215] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered
- [ 6.962367] #0: hikey-hdmi
- [ 7.191811] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=6,+++
- [ 7.196904] xhci-hcd xhci-hcd.0.auto: remove, state 4
- [ 7.201793] [I/hisi_pd] pd_dpm_handle_pe_event unkonw event \x0d
- [ 7.202079] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=5,+++
- [ 7.211547] usb usb1: USB disconnect, device number 1
- [ 7.211840] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered
- [ 7.216138] Pending event is same --> ignore this event 2
- [ 7.226841] [dwc3_otg_stop_host]-
- [ 7.233281] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=3,+++
- [ 7.241455] [dwc3_suspend_device] +
- [ 7.309321] [dwc3_suspend_device] -
- [ 7.309323] [dwc3_otg_work]-
- [ 7.309325] [USB3][hisi_dwc3_wake_unlock]usb otg wake unlock
- [ 7.309327] [USB3][handle_event]hiusb_status: HOST -> OFF
- [ 7.309333] [USB3][handle_event][handle_event] type: 0
- [ 7.332817] uart-pl011 fff32000.serial: no DMA platform data
- [ 7.339423] Freeing unused kernel memory: 3136K
- [ 7.347613] init: init first stage started!
- [ 7.351865] init: Using Android DT directory /proc/device-tree/firmware/android/
- [ 7.360675] init: [libfs_mgr]fs_mgr_read_fstab_default(): failed to find device default fstab
- [ 7.413314] EXT4-fs (sdd10): mounted filesystem without journal. Opts: (null)
- [ 7.420541] init: [libfs_mgr]__mount(source=/dev/block/platform/soc/ff3b0000.ufs/by-name/system,target=/system,type=ext4)=0: Success
- [ 7.434284] EXT4-fs (sdd11): mounted filesystem without journal. Opts: (null)
- [ 7.441516] init: [libfs_mgr]__mount(source=/dev/block/platform/soc/ff3b0000.ufs/by-name/vendor,target=/vendor,type=ext4)=0: Success
- [ 7.453655] init: Skipped setting INIT_AVB_VERSION (not in recovery mode)
- [ 7.460542] init: Loading SELinux policy
- [ 7.475659] SELinux: 8192 avtab hash slots, 17084 rules.
- [ 7.484166] SELinux: 8192 avtab hash slots, 17084 rules.
- [ 7.489485] SELinux: 1 users, 4 roles, 1250 types, 0 bools, 1 sens, 1024 cats
- [ 7.496716] SELinux: 93 classes, 17084 rules
- [ 7.502050] SELinux: Class process2 not defined in policy.
- [ 7.507932] SELinux: Class infiniband_pkey not defined in policy.
- [ 7.514114] SELinux: Class infiniband_endport not defined in policy.
- [ 7.520556] SELinux: the above unknown classes and permissions will be denied
- [ 7.527700] SELinux: policy capability network_peer_controls=1
- [ 7.533617] SELinux: policy capability open_perms=1
- [ 7.538578] SELinux: policy capability extended_socket_class=1
- [ 7.544494] SELinux: policy capability always_check_network=0
- [ 7.550335] SELinux: policy capability cgroup_seclabel=0
- [ 7.555738] SELinux: policy capability nnp_nosuid_transition=0
- [ 7.561690] SELinux: Completing initialization.
- [ 7.566306] SELinux: Setting up existing superblocks.
- [ 7.625067] selinux: SELinux: Loaded policy from /vendor/etc/selinux/precompiled_sepolicy\x0a
- [ 7.625200] audit: type=1403 audit(1155.187:2): policy loaded auid=4294967295 ses=4294967295
- [ 7.643310] [USB3][detect_charger_type]DCD done
- [ 7.647909] audit: type=1404 audit(1155.199:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
- [ 7.673557] selinux: SELinux: Loaded file_contexts\x0a
- [ 7.673598] [USB3][detect_charger_type]Primary Detection done
- [ 7.681567] random: init: uninitialized urandom read (40 bytes read)
- [ 7.685622] [USB3][detect_charger_type]Secondary Detection done
- [ 7.695138] init: init second stage started!
- [ 7.710088] init: Using Android DT directory /proc/device-tree/firmware/android/
- [ 7.720488] selinux: SELinux: Loaded file_contexts\x0a
- [ 7.726804] init: Running restorecon...
- [ 7.729658] [USB3][detect_charger_type]type: 0
- [ 7.734268] init: waitid failed: No child processes
- [ 7.735165] [I/hisi_pd] pd_dpm_report_bc12 : event (0)
- [ 7.743776] init: Couldn't load property file '/odm/default.prop': open() failed: No such file or directory: No such file or directory
- [ 7.745198] [E/hisi_pd] pd_dpm_vbus_notifier_call: pd_dpm_vbus_notifier_call!!!,++++
- [ 7.758058] init: Created socket '/dev/socket/property_service', mode 666, user 0, group 0
- [ 7.765083] [dwc3_otg_work]+\x0a evt = 3
- [ 7.773389] [dwc3_resume_device] +
- [ 7.774908] init: Forked subcontext for 'u:r:vendor_init:s0' with pid 1984
- [ 7.777313] random: init: uninitialized urandom read (40 bytes read)
- [ 7.778844] [dwc3_resume_device] -
- [ 7.783993] init: Forked subcontext for 'u:r:vendor_init:s0' with pid 1985
- [ 7.785309] random: init: uninitialized urandom read (40 bytes read)
- [ 7.788832] [dwc3_otg_start_peripheral]+
- [ 7.788839] [dwc3_otg_start_peripheral]-
- [ 7.788842] [dwc3_otg_work]-
- [ 7.788848] [USB3][hisi_dwc3_wake_lock]usb otg wake lock
- [ 7.795371] init: Parsing file /init.rc...
- [ 7.798647] [USB3][handle_event]hisi usb status: OFF -> DEVICE
- [ 7.798657] [USB3][event_work]-
- [ 7.824806] audit: type=1400 audit(1155.387:4): avc: denied { dac_read_search } for pid=1 comm="init" capability=2 scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=capability permissive=0
- [ 7.828064] [USB3][event_work]+
- [ 7.828067] [USB3][event_work]-
- [ 7.828429] ueventd: ueventd started!
- [ 7.832508] audit: type=1400 audit(1155.395:5): avc: denied { dac_read_search } for pid=1 comm="init" capability=2 scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=capability permissive=0
- [ 7.839038] selinux: SELinux: Loaded file_contexts\x0a
- [ 7.841171] audit: type=1400 audit(1155.395:6): avc: denied { dac_read_search } for pid=1 comm="init" capability=2 scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=capability permissive=0
- [ 7.858293] ueventd: Parsing file /ueventd.rc...
- [ 7.861586] audit: type=1400 audit(1155.395:7): avc: denied { dac_read_search } for pid=1 comm="init" capability=2 scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=capability permissive=0
- [ 7.865164] ueventd: Parsing file /vendor/ueventd.rc...
- [ 7.936267] ueventd: Parsing file /odm/ueventd.rc...
- [ 7.941304] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory
- [ 7.951127] ueventd: Parsing file /ueventd.hikey960.rc...
- [ 7.956568] ueventd: Unable to read config file '/ueventd.hikey960.rc': open() failed: No such file or directory
- [ 7.982124] ueventd: firmware: loading 'ti-connectivity/wl1271-nvs.bin' for '/devices/platform/soc/ff3ff000.dwmmc2/mmc_host/mmc1/mmc1:0001/mmc1:0001:2/wl18xx.2.auto/firmware/ti-connectivity!wl1271-nvs.bin'
- [ 7.987280] ueventd: firmware: loading 'ti-connectivity/TIInit_11.8.32.bts' for '/devices/platform/soc/fdf01000.serial/serial0/serial0-0/firmware/ti-connectivity!TIInit_11.8.32.bts'
- [ 8.018702] Bluetooth: hci0: change remote baud rate command in firmware
- [ 8.079110] Registered swp emulation handler
- [ 8.090515] audit: type=1400 audit(1155.655:8): avc: denied { dac_read_search } for pid=1 comm="init" capability=2 scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=capability permissive=0
- [ 8.093627] watchdogd: watchdogd started (interval 10, margin 20)!
- [ 8.107701] audit: type=1400 audit(1155.655:9): avc: denied { dac_read_search } for pid=1 comm="init" capability=2 scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=capability permissive=0
- [ 8.110642] EXT4-fs (sdd5): mounted filesystem with ordered data mode. Opts: discard,noauto_da_alloc,data=ordered,user_xattr,barrier=1
- [ 8.143160] audit: type=1400 audit(1155.655:10): avc: denied { dac_read_search } for pid=1 comm="init" capability=2 scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=capability permissive=0
- [ 8.151012] fsck.f2fs: Info: Fix the reported corruption.\x0a
- [ 8.160411] audit: type=1400 audit(1155.655:11): avc: denied { dac_read_search } for pid=1 comm="init" capability=2 scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=capability permissive=0
- [ 8.167936] fsck.f2fs: \x09Error: Failed to open the device!\x0a
- [ 8.191410] fsck.f2fs: fsck.f2fs terminated by exit(255)\x0a
- [ 8.199751] F2FS-fs (sdd13): Magic Mismatch, valid(0xf2f52010) - read(0x1813f0)
- [ 8.207151] F2FS-fs (sdd13): Can't find valid F2FS filesystem in 1th superblock
- [ 8.214736] F2FS-fs (sdd13): Magic Mismatch, valid(0xf2f52010) - read(0x100000)
- [ 8.222165] F2FS-fs (sdd13): Can't find valid F2FS filesystem in 2th superblock
- [ 8.229613] F2FS-fs (sdd13): Magic Mismatch, valid(0xf2f52010) - read(0x1813f0)
- [ 8.236982] F2FS-fs (sdd13): Can't find valid F2FS filesystem in 1th superblock
- [ 8.244340] F2FS-fs (sdd13): Magic Mismatch, valid(0xf2f52010) - read(0x100000)
- [ 8.251828] F2FS-fs (sdd13): Can't find valid F2FS filesystem in 2th superblock
- [ 8.272883] fsck.f2fs: Info: Fix the reported corruption.\x0a
- [ 8.279915] fsck.f2fs: \x09Error: Failed to open the device!\x0a
- [ 8.286875] fsck.f2fs: fsck.f2fs terminated by exit(255)\x0a
- [ 8.295481] F2FS-fs (sdd13): Magic Mismatch, valid(0xf2f52010) - read(0x1813f0)
- [ 8.302882] F2FS-fs (sdd13): Can't find valid F2FS filesystem in 1th superblock
- [ 8.310509] F2FS-fs (sdd13): Magic Mismatch, valid(0xf2f52010) - read(0x100000)
- [ 8.317864] F2FS-fs (sdd13): Can't find valid F2FS filesystem in 2th superblock
- [ 8.325364] F2FS-fs (sdd13): Magic Mismatch, valid(0xf2f52010) - read(0x1813f0)
- [ 8.332727] F2FS-fs (sdd13): Can't find valid F2FS filesystem in 1th superblock
- [ 8.340073] F2FS-fs (sdd13): Magic Mismatch, valid(0xf2f52010) - read(0x100000)
- [ 8.347440] F2FS-fs (sdd13): Can't find valid F2FS filesystem in 2th superblock
- [ 8.361315] EXT4-fs (sdd13): mounted filesystem with ordered data mode. Opts: discard,noauto_da_alloc,data=ordered,user_xattr,barrier=1
- [ 8.428931] logd.auditd: start
- [ 8.432048] logd.klogd: 8426708852
- [ 8.465418] type=1400 audit(1155.995:57): avc: denied { dac_read_search } for pid=1 comm="init" capability=2 scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=capability permissive=0
- [ 8.553806] vdc: Waited 0ms for vold
- [ 8.861266] logd.daemon: reinit
- [ 8.883193] file system registered
- [ 8.909953] wl18xx_driver wl18xx.2.auto: loading /vendor/firmware/ti-connectivity/wl18xx-conf.bin failed with error -13
- [ 8.911807] healthd: No battery devices found
- [ 8.926868] hisi_thermal fff30000.tsensor: THERMAL ALARM: 65780 > 65000
- [ 8.938410] read descriptors
- [ 8.941452] read strings
- [ 8.945217] hisi_ddr_devfreq ddr_devfreq: ddr bandwdith request: 0 / 28472
- [ 8.949679] wl18xx_driver wl18xx.2.auto: Direct firmware load for ti-connectivity/wl18xx-conf.bin failed with error -2
- [ 8.964101] wl18xx_driver wl18xx.2.auto: Falling back to user helper
- [ 8.964636] hisi_ddr_devfreq ddr_devfreq: set down threshold:400000000
- [ 8.979381] healthd: battery none chg=
- [ 9.053355] CPU5: update max cpu_capacity 782
- [ 9.085363] CPU7: update max cpu_capacity 915
- [ 9.121357] CPU7: update max cpu_capacity 782
- [ 9.157366] CPU7: update max cpu_capacity 915
- [ 9.189357] CPU6: update max cpu_capacity 1024
- [ 9.225011] CPU6: update max cpu_capacity 782
- [ 9.253350] CPU5: update max cpu_capacity 915
- [ 9.260431] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
- [ 9.270321] wlcore: loaded
- [ 9.308313] CPU6: update max cpu_capacity 1024
- [ 9.325817] android_work: sent uevent USB_STATE=CONNECTED
- [ 10.413125] capability: warning: `main' uses 32-bit capabilities (legacy support in use)
- [ 10.446007] hisi_thermal fff30000.tsensor: THERMAL ALARM stopped: 60860 < 65000
- [ 10.483489] [drm] mode->clock(org) = 148500
- [ 10.487705] [drm] dss_pxl0_clk = 144000
- [ 10.569809] [drm] Expected : lane_clock = 864 M
- [ 10.574364] [drm] Config : lane_clock = 864000000
- [ 10.579075] [drm] PHY clock_lane and data_lane config : \x0arg_vrefsel_vcm=85\x0aclk_pre_delay=0\x0aclk_post_delay=41\x0aclk_t_hs_prepare=10\x0aclk_t_lpx=13\x0aclk_t_hs_zero=27\x0aclk_t_hs_trial=10\x0adata_pre_delay=61\x0adata_post_delay=0\x0adata_t_hs_prepare=9\x0adata_t_lpx=13\x0adata_t_hs_zero=12\x0adata_t_hs_trial=12\x0adata_t_ta_go=4\x0adata_t_ta_get=5
- [ 10.627659] [drm] clk_lane_lp2hs_time=63\x0aclk_lane_hs2lp_time=58\x0adata_lane_lp2hs_time=104\x0adata_lane_hs2lp_time=19\x0aphy_stop_wait_time=53
- [ 10.645576] [drm] hsa_time=33, hbp_time=111, hline_time=1650
- [ 10.651240] [drm] lane_byte_clk=108000000, pixel_clk=144000000
- [ 10.657095] [drm] dsi_mipi_init ok
- [ 11.359051] hisi_thermal fff30000.tsensor: THERMAL ALARM: 65575 > 65000
- [ 11.632723] type=1400 audit(1157.527:522): avc: denied { dac_read_search } for pid=1 comm="init" capability=2 scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=capability permissive=0 duplicate messages suppressed
- [ 11.651852] type=1400 audit(1159.195:523): avc: denied { dac_read_search } for pid=2679 comm="Binder:2679_1" capability=2 scontext=u:r:installd:s0 tcontext=u:r:installd:s0 tclass=capability permissive=0
- [ 11.751847] hisi_thermal fff30000.tsensor: THERMAL ALARM stopped: 61065 < 65000
- [ 11.839404] healthd: battery none chg=
- [ 11.843471] healthd: battery none chg=
- [ 11.868726] healthd: battery none chg=
- [ 11.948821] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=6,+++
- [ 11.954719] [I/hisi_pd] pd_dpm_handle_pe_event unkonw event \x0d
- [ 11.960613] hisi_thermal fff30000.tsensor: THERMAL ALARM: 66600 > 65000
- [ 11.967618] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=5,+++
- [ 11.973601] Pending event is same --> ignore this event 2
- [ 11.979299] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=3,+++
- [ 12.485693] hisi_thermal fff30000.tsensor: THERMAL ALARM stopped: 61065 < 65000
- [ 13.090589] random: crng init done
- [ 13.094022] random: 7 urandom warning(s) missed due to ratelimiting
- [ 13.112620] type=1400 audit(1159.199:528): avc: denied { dac_read_search } for pid=2679 comm="Binder:2679_1" capability=2 scontext=u:r:installd:s0 tcontext=u:r:installd:s0 tclass=capability permissive=0 duplicate messages suppressed
- [ 13.133369] type=1400 audit(1160.675:5149): avc: denied { read } for pid=2851 comm="system_server" name="hctosys" dev="sysfs" ino=14602 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=0
- [ 13.174357] init: processing action (sys.sysctl.extra_free_kbytes=*) from (/init.rc:725)
- [ 13.231245] [drm] mode->clock(org) = 148352
- [ 13.235515] [drm] dss_pxl0_clk = 145454
- [ 13.270334] hisi_thermal fff30000.tsensor: THERMAL ALARM: 65370 > 65000
- [ 13.316644] [drm] Expected : lane_clock = 872 M
- [ 13.321202] [drm] Config : lane_clock = 870400000
- [ 13.325931] [drm] PHY clock_lane and data_lane config : \x0arg_vrefsel_vcm=85\x0aclk_pre_delay=0\x0aclk_post_delay=41\x0aclk_t_hs_prepare=10\x0aclk_t_lpx=13\x0aclk_t_hs_zero=27\x0aclk_t_hs_trial=10\x0adata_pre_delay=61\x0adata_post_delay=0\x0adata_t_hs_prepare=10\x0adata_t_lpx=13\x0adata_t_hs_zero=12\x0adata_t_hs_trial=12\x0adata_t_ta_go=4\x0adata_t_ta_get=5
- [ 13.330260] hisi_thermal fff30000.tsensor: THERMAL ALARM stopped: 61065 < 65000
- [ 13.374605] [drm] clk_lane_lp2hs_time=63\x0aclk_lane_hs2lp_time=58\x0adata_lane_lp2hs_time=105\x0adata_lane_hs2lp_time=19\x0aphy_stop_wait_time=53
- [ 13.374832] [drm] hsa_time=32, hbp_time=110, hline_time=1646
- [ 13.401841] read descriptors
- [ 13.405253] [drm] lane_byte_clk=108800000, pixel_clk=145454000
- [ 13.408158] read strings
- [ 13.413953] [drm] dsi_mipi_init ok
- [ 13.416514] read descriptors
- [ 13.422801] read strings
- [ 13.433677] acc_open
- [ 13.435878] acc_release
- [ 13.551932] hisi_thermal fff30000.tsensor: THERMAL ALARM: 66600 > 65000
- [ 13.579421] type=1400 audit(1160.675:5149): avc: denied { read } for pid=2851 comm="system_server" name="hctosys" dev="sysfs" ino=14602 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=0
- [ 13.588869] audit_log_lost: 49 callbacks suppressed
- [ 13.588872] audit: audit_lost=5074 audit_rate_limit=5 audit_backlog_limit=64
- [ 13.599072] type=1400 audit(1585820645.463:5150): avc: denied { dac_read_search } for pid=2963 comm="main" capability=2 scontext=u:r:zygote:s0 tcontext=u:r:zygote:s0 tclass=capability permissive=0
- [ 13.604760] audit: rate limit exceeded
- [ 13.646290] sdcardfs version 2.0
- [ 13.649529] sdcardfs: dev_name -> /data/media
- [ 13.654092] sdcardfs: options -> fsuid=1023,fsgid=1023,multiuser,derive_gid,default_normal,mask=6,userid=0,gid=1015
- [ 13.665153] sdcardfs: mnt -> ffffffc2196d8aa0
- [ 13.669683] sdcardfs: mounted on top of /data/media type ext4
- [ 13.676032] Remount options were mask=23,gid=9997 for vfsmnt ffffffc0ce20c020.
- [ 13.683290] sdcardfs : options - debug:1
- [ 13.687230] sdcardfs : options - gid:9997
- [ 13.691266] sdcardfs : options - mask:23
- [ 13.695618] Remount options were mask=7,gid=9997 for vfsmnt ffffffc0d61513a0.
- [ 13.702779] sdcardfs : options - debug:1
- [ 13.706719] sdcardfs : options - gid:9997
- [ 13.710742] sdcardfs : options - mask:7
- [ 13.979034] hisi_thermal fff30000.tsensor: THERMAL ALARM stopped: 61065 < 65000
- [ 14.115140] hisi_thermal fff30000.tsensor: THERMAL ALARM: 65985 > 65000
- [ 14.129057] type=1400 audit(1585820645.463:5153): avc: denied { dac_read_search } for pid=2963 comm="main" capability=2 scontext=u:r:zygote:s0 tcontext=u:r:zygote:s0 tclass=capability permissive=0 duplicate messages suppressed
- [ 14.149718] type=1400 audit(1585820646.011:5182): avc: denied { dac_read_search } for pid=3159 comm="main" capability=2 scontext=u:r:zygote:s0 tcontext=u:r:zygote:s0 tclass=capability permissive=0
- [ 14.222343] type=1400 audit(1585820646.015:5185): avc: denied { dac_read_search } for pid=3159 comm="main" capability=2 scontext=u:r:zygote:s0 tcontext=u:r:zygote:s0 tclass=capability permissive=0 duplicate messages suppressed
- [ 14.242930] type=1400 audit(1585820646.107:5186): avc: denied { dac_read_search } for pid=3217 comm="main" capability=2 scontext=u:r:zygote:s0 tcontext=u:r:zygote:s0 tclass=capability permissive=0
- [ 15.316156] init: Service 'bootanim' (pid 2832) exited with status 0
- [ 15.333783] hisi_ddr_devfreq ddr_devfreq: ddr bandwdith request: 0 / 28472
- [ 15.341322] hisi_ddr_devfreq ddr_devfreq: set down threshold:685000000
- [ 15.343090] init: processing action (sys.boot_completed=1) from (/init.rc:719)
- [ 15.355872] init: processing action (sys.boot_completed=1 && sys.logbootcomplete=1) from (/system/etc/init/bootstat.rc:70)
- [ 15.361289] type=1400 audit(1585820646.107:5186): avc: denied { dac_read_search } for pid=3217 comm="main" capability=2 scontext=u:r:zygote:s0 tcontext=u:r:zygote:s0 tclass=capability permissive=0
- [ 15.368771] init: starting service 'exec 13 (/system/bin/bootstat --set_system_boot_reason --record_boot_complete --record_boot_reason --record_time_since_factory_reset -l)'...
- [ 15.381267] android_work: sent uevent USB_STATE=DISCONNECTED
- [ 15.386410] audit: audit_lost=5105 audit_rate_limit=5 audit_backlog_limit=64
- [ 15.387142] type=1400 audit(1585820647.243:5190): avc: denied { dac_read_search } for pid=2582 comm="Binder:2582_4" capability=2 scontext=u:r:vold:s0 tcontext=u:r:vold:s0 tclass=capability permissive=0
- [ 15.387328] type=1400 audit(1585820647.247:5193): avc: denied { dac_read_search } for pid=2582 comm="Binder:2582_4" capability=2 scontext=u:r:vold:s0 tcontext=u:r:vold:s0 tclass=capability permissive=0 duplicate messages suppressed
- [ 15.387334] type=1400 audit(1585820647.271:5194): avc: denied { dac_read_search } for pid=3344 comm="main" capability=2 scontext=u:r:zygote:s0 tcontext=u:r:zygote:s0 tclass=capability permissive=0
- [ 15.401639] init: processing action (sys.boot_completed=1 && sys.wifitracing.started=0) from (/system/etc/init/wifi-events.rc:20)
- [ 15.406445] audit: rate limit exceeded
- [ 15.425452] android_work: sent uevent USB_STATE=CONNECTED
- [ 15.442134] selinux: SELinux: Skipping restorecon_recursive(/data/system_ce/0)\x0a
- [ 15.452290] android_work: sent uevent USB_STATE=DISCONNECTED
- [ 15.515536] android_work: sent uevent USB_STATE=CONNECTED
- [ 15.525477] init: Command 'write /sys/kernel/debug/tracing/instances/wifi/buffer_size_kb 1' action=sys.boot_completed=1 && sys.wifitracing.started=0 (/system/etc/init/wifi-events.rc:25) took 83ms and succeeded
- [ 15.546003] init: Async property child exited with status 0
- [ 15.554111] init: Service 'exec 13 (/system/bin/bootstat --set_system_boot_reason --record_boot_complete --record_boot_reason --record_time_since_factory_reset -l)' (pid 3349) exited with status 0
- [ 15.691600] configfs-gadget gadget: high-speed config #1: b
- [ 15.697522] android_work: sent uevent USB_STATE=CONFIGURED
- [ 16.686086] audit: audit_lost=6221 audit_rate_limit=5 audit_backlog_limit=64
- [ 16.686619] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=6,+++
- [ 16.693211] audit: rate limit exceeded
- [ 16.699190] [I/hisi_pd] pd_dpm_handle_pe_event unkonw event \x0d
- [ 16.709228] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=5,+++
- [ 16.715201] Pending event is same --> ignore this event 2
- [ 16.720804] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=3,+++
- [ 17.057570] hisi_ddr_devfreq ddr_devfreq: ddr bandwdith request: 0 / 28472
- [ 17.064485] hisi_ddr_devfreq ddr_devfreq: set down threshold:400000000
- [ 17.588639] hisi_thermal fff30000.tsensor: THERMAL ALARM stopped: 61065 < 65000
- [ 21.427272] [I/hisi_pd] PE:TYPE-C Only Charger!\x0d
- [ 21.431951] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=3,+++
- [ 21.437893] [I/hisi_pd] pd_dpm_report_pd_sink_vbus : Sink 5000 mV, 500 mA
- [ 21.444694] [E/hisi_pd] pd_dpm_vbus_notifier_call: pd_dpm_vbus_notifier_call!!!,++++
- [ 21.452517] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=8,+++
- [ 44.371636] android_work: sent uevent USB_STATE=DISCONNECTED
- [ 44.378705] init: Service 'adbd' (pid 2672) exited with status 1
- [ 44.384917] init: Sending signal 9 to service 'adbd' (pid 2672) process group...
- [ 44.393186] type=1400 audit(1585820648.571:6315): avc: denied { dac_read_search } for pid=3653 comm="main" capability=2 scontext=u:r:zygote:s0 tcontext=u:r:zygote:s0 tclass=capability permissive=0
- [ 44.393272] libprocessgroup: Successfully killed process cgroup uid 0 pid 2672 in 0ms
- [ 44.410727] type=1400 audit(1585820676.275:6335): avc: denied { dac_read_search } for pid=1 comm="init" capability=2 scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=capability permissive=0
- [ 44.419907] init: starting service 'adbd'...
- [ 44.440885] audit: audit_lost=6240 audit_rate_limit=5 audit_backlog_limit=64
- [ 44.441650] init: Created socket '/dev/socket/adbd', mode 660, user 1000, group 1000
- [ 44.448006] audit: rate limit exceeded
- [ 44.460606] read descriptors
- [ 44.463515] read strings
- [ 44.467013] init: processing action (sys.usb.config=adb && sys.usb.configfs=1 && sys.usb.ffs.ready=1) from (/init.usb.configfs.rc:20)
- [ 44.793309] android_work: did not send uevent (0 0 (null))
- [ 44.841936] android_work: sent uevent USB_STATE=CONNECTED
- [ 44.985742] android_work: sent uevent USB_STATE=DISCONNECTED
- [ 45.029488] android_work: sent uevent USB_STATE=CONNECTED
- [ 45.035260] android_work: sent uevent USB_STATE=DISCONNECTED
- [ 45.088455] android_work: sent uevent USB_STATE=CONNECTED
- [ 45.263991] configfs-gadget gadget: high-speed config #1: b
- [ 45.270147] android_work: sent uevent USB_STATE=CONFIGURED
Add Comment
Please, Sign In to add comment