sinned6915

m122

Aug 16th, 2019
118
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. 6:08:44 PMM122
  2. === Diagnostics ===
  3. RepRapFirmware for LPC176x based Boards version 2.04RC1 running on LPC176x at 100Mhz
  4. Used output buffers: 4 of 16 (12 max)
  5. === RTOS ===
  6. Static ram: 2940
  7. Dynamic ram: 29192 of which 0 recycled
  8. Exception stack ram used: 344
  9. Never used ram: 260
  10. Main SRAM : 32476/32768 (292 free, 260 never used)
  11. RTOS Dynamic Heap : 40928/46720 (5792 free, 5792 never used)
  12. === LPC PWM ===
  13. HWPWM:250Hz T1:10Hz T2:0Hz T3:250Hz
  14. Tasks: EMAC(blocked,52) NETWORK(ready,460) IP-task(blocked,80) HEAT(blocked,1312) MAIN(running,2268) IDLE(ready,164)
  15. Owned mutexes:
  16. === Platform ===
  17. Last reset 07:07:24 ago, cause: [software]
  18. Flash Slot[114]:
  19. Last software reset at 2019-08-16 11:01, reason: User, spinning module GCodes, available RAM 268 bytes (slot 0)
  20. Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00400000 BFAR 0xe000ed38 SP 0x00000000 Task 0x2007cfc0
  21. Stack: 00000000 00000002 0001860d 20080110 2007ff90 00000000 10003410 10004258 10003450 00000001 000187a7 00000000 10003410 10003d98 00000050 00000007 10003d98 10003410 2007eb94 00000001 a5a5a5a5 000003e7 a5a5a5a5
  22. Error status: 0
  23. Free file entries: 3
  24. SD card 0 detected
  25. SD card longest block write time: 184.4ms, max retries 0
  26. Date/time: 2019-08-16 18:08:43
  27. Slowest loop: 280.62ms; fastest: 0.06ms
  28. === Move ===
  29. Hiccups: 0, FreeDm: 99, MinFreeDm: 63, MaxWait: 24240329ms
  30. Bed compensation in use: mesh, comp offset 0.000
  31. === DDARing ===
  32. Scheduled moves: 18693, completed moves: 18673, StepErrors: 0, LaErrors: 0, Underruns: 0, 0
  33. === Heat ===
  34. Bed heaters = 0, chamberHeaters = -1 -1
  35. Heater 0 is on, I-accum = 0.1
  36. Heater 1 is on, I-accum = 0.4
  37. === GCodes ===
  38. Segments left: 1
  39. Stack records: 2 allocated, 0 in use
  40. Movement lock held by null
  41. http is ready with "M122 " in state(s) 0
  42. file is doing "G1 X159.079 Y175.389 E0.02420 " in state(s) 0
  43. serial is idle in state(s) 0
  44. aux is idle in state(s) 0
  45. daemon is idle in state(s) 0
  46. queue is idle in state(s) 0
  47. lcd is idle in state(s) 0
  48. autopause is idle in state(s) 0
  49. Code queue is empty.
  50. === Network ===
  51. Slowest loop: 492.37ms; fastest: 0.02ms
  52. Responder states: HTTP(2) HTTP(2)
  53. HTTP sessions: 1 of 2
  54. Interface state: active
  55. Socket States: Connected(5ms) Connected(26ms)
  56. NetBuffers: 3 lowest: 1
  57. IP Event Queue lowest: 9
  58. EthDrv: Rejected packets by IPStack (timeout or full): 0
  59. EthDrv: RX IntOverrun Errors: 0
  60. EthDrv: Dropped packets (no buffer): 6
  61. EthDrv RX Errors: none
  62. 6:08:29 PMM122 P200
  63. == Configurable Board Settings ==
  64. leds.diagnostic = 4.28
  65. lpc.internalSDCard.spiFrequencyHz = 25000000
  66. stepper.enablePins = [ 0.10 0.19 0.21 0.4 4.29 ]
  67. stepper.stepPins = [ 2.1 2.2 2.3 2.0 2.8 ]
  68. stepper.directionPins = [ 0.11 0.20 0.22 0.5 2.13 ]
  69. stepper.hasDriverCurrentControl = false
  70. stepper.digipotFactor = 113.33
  71. endstop.pins = [ 1.24 1.26 1.29 1.25 1.27 1.28 ]
  72. zProbe.pin = 1.29
  73. zProbe.modulationPin = NoPin
  74. heat.tempSensePins = [ 0.24 0.23 NoPin ]
  75. heat.heatOnPins = [ 2.5 2.7 NoPin ]
  76. heat.spiTempSensorCSPins = [ NoPin NoPin ]
  77. fan.pins = [ 2.4 1.19 ]
  78. fan.tachoPins = [ NoPin ]
  79. atxPowerPin = 2.12
  80. lpc.slowPWM.frequencyHz = 10
  81. lpc.slowPWM.pins = [ 2.5 NoPin NoPin ]
  82. lpc.fastPWM.frequencyHz = 250
  83. lpc.fastPWM.pins = [ 2.7 NoPin NoPin ]
  84. lpc.servoPins = [ 1.20 1.21 NoPin ]
  85. specialPinMap = [ 1.20 1.21 NoPin NoPin NoPin NoPin NoPin NoPin NoPin NoPin ]
  86. lpc.externalInterruptPins = [ NoPin NoPin NoPin ]
  87. externalSDCard.csPin = 1.23
  88. externalSDCard.cardDetectPin = 1.31
  89. lpc.externalSDCard.spiFrequencyHz = 4000000
  90. lpc.externalSDCard.spiChannel = 0
  91. lcd.lcdCSPin = NoPin
  92. lcd.lcdBeepPin = NoPin
  93. lcd.encoderPinA = NoPin
  94. lcd.encoderPinB = NoPin
  95. lcd.encoderPinSw = NoPin
  96. lcd.lcdDCPin = NoPin
  97. lcd.panelButtonPin = NoPin
  98. lcd.spiChannel = 0
  99. lpc.softwareSPI.pins = [ NoPin NoPin NoPin ]
  100. lpc.uartPanelDueMode = true
  101. 5:51:41 PMConnection established!
  102. 5:51:41 PMPage Load complete!
RAW Paste Data