Advertisement
Guest User

Untitled

a guest
Apr 22nd, 2017
110
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 56.76 KB | None | 0 0
  1. [ 0.000000] 3 base 07C000000 mask FFC000000 uncachable
  2. [ 0.000000] 4 base 07BC00000 mask FFFC00000 uncachable
  3. [ 0.000000] 5 base 100000000 mask F00000000 write-back
  4. [ 0.000000] 6 base 200000000 mask F80000000 write-back
  5. [ 0.000000] 7 disabled
  6. [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
  7. [ 0.000000] e820: last_pfn = 0x78000 max_arch_pfn = 0x400000000
  8. [ 0.000000] Scanning 1 areas for low memory corruption
  9. [ 0.000000] Base memory trampoline at [ffff9c0c40098000] 98000 size 24576
  10. [ 0.000000] BRK [0x0d628000, 0x0d628fff] PGTABLE
  11. [ 0.000000] BRK [0x0d629000, 0x0d629fff] PGTABLE
  12. [ 0.000000] BRK [0x0d62a000, 0x0d62afff] PGTABLE
  13. [ 0.000000] BRK [0x0d62b000, 0x0d62bfff] PGTABLE
  14. [ 0.000000] BRK [0x0d62c000, 0x0d62cfff] PGTABLE
  15. [ 0.000000] BRK [0x0d62d000, 0x0d62dfff] PGTABLE
  16. [ 0.000000] BRK [0x0d62e000, 0x0d62efff] PGTABLE
  17. [ 0.000000] BRK [0x0d62f000, 0x0d62ffff] PGTABLE
  18. [ 0.000000] BRK [0x0d630000, 0x0d630fff] PGTABLE
  19. [ 0.000000] BRK [0x0d631000, 0x0d631fff] PGTABLE
  20. [ 0.000000] BRK [0x0d632000, 0x0d632fff] PGTABLE
  21. [ 0.000000] BRK [0x0d633000, 0x0d633fff] PGTABLE
  22. [ 0.000000] RAMDISK: [mem 0x32dcb000-0x356dcfff]
  23. [ 0.000000] ACPI: Early table checksum verification disabled
  24. [ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
  25. [ 0.000000] ACPI: XSDT 0x0000000077FFE120 000094 (v01 ACRSYS ACRPRDCT 00000003 01000013)
  26. [ 0.000000] ACPI: FACP 0x0000000077FF5000 00010C (v05 ACRSYS ACRPRDCT 00000003 1025 00040000)
  27. [ 0.000000] ACPI: DSDT 0x0000000077FE3000 00C541 (v02 ACRSYS ACRPRDCT 00000003 1025 00040000)
  28. [ 0.000000] ACPI: FACS 0x0000000077F3F000 000040
  29. [ 0.000000] ACPI: UEFI 0x0000000077FFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
  30. [ 0.000000] ACPI: MSDM 0x0000000077FFC000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
  31. [ 0.000000] ACPI: UEFI 0x0000000077FFB000 000042 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
  32. [ 0.000000] ACPI: SSDT 0x0000000077FF6000 0041CE (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
  33. [ 0.000000] ACPI: MCFG 0x0000000077FF3000 00003C (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
  34. [ 0.000000] ACPI: SLIC 0x0000000077FF2000 000176 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
  35. [ 0.000000] ACPI: SSDT 0x0000000077FF1000 0005AC (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
  36. [ 0.000000] ACPI: SSDT 0x0000000077FF0000 000D41 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
  37. [ 0.000000] ACPI: SSDT 0x0000000077FE2000 000763 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
  38. [ 0.000000] ACPI: SSDT 0x0000000077FE1000 000290 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
  39. [ 0.000000] ACPI: SSDT 0x0000000077FE0000 00017A (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
  40. [ 0.000000] ACPI: APIC 0x0000000077FF4000 000084 (v03 ACRSYS ACRPRDCT 00000003 1025 00040000)
  41. [ 0.000000] ACPI: FPDT 0x0000000077FDF000 000044 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
  42. [ 0.000000] ACPI: Local APIC address 0xfee00000
  43. [ 0.000000] No NUMA configuration found
  44. [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
  45. [ 0.000000] NODE_DATA(0) allocated [mem 0x27ffd2000-0x27fffcfff]
  46. [ 0.000000] Zone ranges:
  47. [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
  48. [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
  49. [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff]
  50. [ 0.000000] Device empty
  51. [ 0.000000] Movable zone start for each node
  52. [ 0.000000] Early memory node ranges
  53. [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
  54. [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
  55. [ 0.000000] node 0: [mem 0x0000000020200000-0x00000000712b1fff]
  56. [ 0.000000] node 0: [mem 0x0000000071bb2000-0x000000007657efff]
  57. [ 0.000000] node 0: [mem 0x0000000077fff000-0x0000000077ffffff]
  58. [ 0.000000] node 0: [mem 0x0000000100000000-0x000000027fffffff]
  59. [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff]
  60. [ 0.000000] On node 0 totalpages: 2054685
  61. [ 0.000000] DMA zone: 64 pages used for memmap
  62. [ 0.000000] DMA zone: 21 pages reserved
  63. [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
  64. [ 0.000000] DMA32 zone: 7466 pages used for memmap
  65. [ 0.000000] DMA32 zone: 477824 pages, LIFO batch:31
  66. [ 0.000000] Normal zone: 24576 pages used for memmap
  67. [ 0.000000] Normal zone: 1572864 pages, LIFO batch:31
  68. [ 0.000000] Reserving Intel graphics memory at 0x000000007c800000-0x000000007e7fffff
  69. [ 0.000000] ACPI: PM-Timer IO Port: 0x408
  70. [ 0.000000] ACPI: Local APIC address 0xfee00000
  71. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
  72. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
  73. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
  74. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
  75. [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
  76. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  77. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  78. [ 0.000000] ACPI: IRQ0 used by override.
  79. [ 0.000000] ACPI: IRQ9 used by override.
  80. [ 0.000000] Using ACPI (MADT) for SMP configuration information
  81. [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
  82. [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
  83. [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
  84. [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
  85. [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
  86. [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
  87. [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
  88. [ 0.000000] PM: Registered nosave memory: [mem 0x712b2000-0x71bb1fff]
  89. [ 0.000000] PM: Registered nosave memory: [mem 0x7657f000-0x76ebefff]
  90. [ 0.000000] PM: Registered nosave memory: [mem 0x76ebf000-0x77fbefff]
  91. [ 0.000000] PM: Registered nosave memory: [mem 0x77fbf000-0x77ffefff]
  92. [ 0.000000] PM: Registered nosave memory: [mem 0x78000000-0x7bbfffff]
  93. [ 0.000000] PM: Registered nosave memory: [mem 0x7bc00000-0x7bffffff]
  94. [ 0.000000] PM: Registered nosave memory: [mem 0x7c000000-0x7c3fffff]
  95. [ 0.000000] PM: Registered nosave memory: [mem 0x7c400000-0x7fffffff]
  96. [ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
  97. [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
  98. [ 0.000000] PM: Registered nosave memory: [mem 0xe4000000-0xfe7fffff]
  99. [ 0.000000] PM: Registered nosave memory: [mem 0xfe800000-0xfe80ffff]
  100. [ 0.000000] PM: Registered nosave memory: [mem 0xfe810000-0xfe9fffff]
  101. [ 0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfeafffff]
  102. [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
  103. [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
  104. [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
  105. [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
  106. [ 0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xfed02fff]
  107. [ 0.000000] PM: Registered nosave memory: [mem 0xfed03000-0xfed03fff]
  108. [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed07fff]
  109. [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed09fff]
  110. [ 0.000000] PM: Registered nosave memory: [mem 0xfed0a000-0xfed1bfff]
  111. [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1cfff]
  112. [ 0.000000] PM: Registered nosave memory: [mem 0xfed1d000-0xfed7ffff]
  113. [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfedbffff]
  114. [ 0.000000] PM: Registered nosave memory: [mem 0xfedc0000-0xfedfffff]
  115. [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
  116. [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
  117. [ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
  118. [ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
  119. [ 0.000000] Booting paravirtualized kernel on bare hardware
  120. [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
  121. [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
  122. [ 0.000000] percpu: Embedded 36 pages/cpu @ffff9c0ebfc00000 s107800 r8192 d31464 u524288
  123. [ 0.000000] pcpu-alloc: s107800 r8192 d31464 u524288 alloc=1*2097152
  124. [ 0.000000] pcpu-alloc: [0] 0 1 2 3
  125. [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2022558
  126. [ 0.000000] Policy zone: Normal
  127. [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-19-generic root=UUID=b4c6be25-d8fc-474f-b601-47a4792aa746 ro quiet splash vt.handoff=7
  128. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  129. [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
  130. [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
  131. [ 0.000000] Memory: 7960112K/8218740K available (9061K kernel code, 1666K rwdata, 3816K rodata, 2228K init, 2364K bss, 258628K reserved, 0K cma-reserved)
  132. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  133. [ 0.000000] Hierarchical RCU implementation.
  134. [ 0.000000] Build-time adjustment of leaf fanout to 64.
  135. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
  136. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
  137. [ 0.000000] NR_IRQS:524544 nr_irqs:1024 16
  138. [ 0.000000] vt handoff: transparent VT on vt#7
  139. [ 0.000000] Console: colour dummy device 80x25
  140. [ 0.000000] console [tty0] enabled
  141. [ 0.000000] tsc: Detected 1600.000 MHz processor
  142. [ 0.000036] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.00 BogoMIPS (lpj=6400000)
  143. [ 0.000040] pid_max: default: 32768 minimum: 301
  144. [ 0.000067] ACPI: Core revision 20160930
  145. [ 0.019673] ACPI: 7 ACPI AML tables successfully acquired and loaded
  146. [ 0.019746] Security Framework initialized
  147. [ 0.019749] Yama: becoming mindful.
  148. [ 0.019784] AppArmor: AppArmor initialized
  149. [ 0.020990] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
  150. [ 0.025132] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
  151. [ 0.026991] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
  152. [ 0.027014] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
  153. [ 0.027562] CPU: Physical Processor ID: 0
  154. [ 0.027565] CPU: Processor Core ID: 0
  155. [ 0.027570] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
  156. [ 0.027572] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
  157. [ 0.027582] mce: CPU supports 6 MCE banks
  158. [ 0.027591] CPU0: Thermal monitoring enabled (TM1)
  159. [ 0.027598] process: using mwait in idle threads
  160. [ 0.027603] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
  161. [ 0.027605] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
  162. [ 0.027917] Freeing SMP alternatives memory: 32K
  163. [ 0.030237] ftrace: allocating 34175 entries in 134 pages
  164. [ 0.060065] smpboot: Max logical packages: 2
  165. [ 0.062299] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  166. [ 0.102294] TSC deadline timer enabled
  167. [ 0.102298] smpboot: CPU0: Intel(R) Celeron(R) CPU N3060 @ 1.60GHz (family: 0x6, model: 0x4c, stepping: 0x4)
  168. [ 0.102449] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
  169. [ 0.102469] ... version: 3
  170. [ 0.102470] ... bit width: 40
  171. [ 0.102471] ... generic registers: 2
  172. [ 0.102472] ... value mask: 000000ffffffffff
  173. [ 0.102474] ... max period: 0000007fffffffff
  174. [ 0.102475] ... fixed-purpose events: 3
  175. [ 0.102476] ... event mask: 0000000700000003
  176. [ 0.104205] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
  177. [ 0.104247] smp: Bringing up secondary CPUs ...
  178. [ 0.104509] x86: Booting SMP configuration:
  179. [ 0.104512] .... node #0, CPUs: #1
  180. [ 0.104749] smp: Brought up 1 node, 2 CPUs
  181. [ 0.104753] smpboot: Total of 2 processors activated (6400.00 BogoMIPS)
  182. [ 0.106738] devtmpfs: initialized
  183. [ 0.106881] x86/mm: Memory block size: 128MB
  184. [ 0.115562] evm: security.selinux
  185. [ 0.115564] evm: security.SMACK64
  186. [ 0.115565] evm: security.SMACK64EXEC
  187. [ 0.115566] evm: security.SMACK64TRANSMUTE
  188. [ 0.115567] evm: security.SMACK64MMAP
  189. [ 0.115568] evm: security.ima
  190. [ 0.115569] evm: security.capability
  191. [ 0.115698] PM: Registering ACPI NVS region [mem 0x76ebf000-0x77fbefff] (17825792 bytes)
  192. [ 0.116669] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  193. [ 0.116689] futex hash table entries: 1024 (order: 4, 65536 bytes)
  194. [ 0.116796] pinctrl core: initialized pinctrl subsystem
  195. [ 0.117044] RTC time: 18:59:52, date: 04/22/17
  196. [ 0.117270] NET: Registered protocol family 16
  197. [ 0.126369] cpuidle: using governor ladder
  198. [ 0.138386] cpuidle: using governor menu
  199. [ 0.138390] PCCT header not found.
  200. [ 0.138465] ACPI: bus type PCI registered
  201. [ 0.138467] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
  202. [ 0.138617] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
  203. [ 0.138723] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
  204. [ 0.138735] PCI: Using configuration type 1 for base access
  205. [ 0.150736] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  206. [ 0.151346] ACPI: Added _OSI(Module Device)
  207. [ 0.151348] ACPI: Added _OSI(Processor Device)
  208. [ 0.151349] ACPI: Added _OSI(3.0 _SCP Extensions)
  209. [ 0.151351] ACPI: Added _OSI(Processor Aggregator Device)
  210. [ 0.158817] ACPI Error: No handler for Region [RAM_] (ffff9c0eb74ca708) [EmbeddedControl] (20160930/evregion-166)
  211. [ 0.158831] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160930/exfldio-299)
  212. [ 0.158839] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC0._REG] (Node ffff9c0eb74cbaa0), AE_NOT_EXIST (20160930/psparse-543)
  213. [ 0.158946] ACPI Error: No handler for Region [RAM_] (ffff9c0eb74ca708) [EmbeddedControl] (20160930/evregion-166)
  214. [ 0.158954] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160930/exfldio-299)
  215. [ 0.158961] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC0._REG] (Node ffff9c0eb74cbaa0), AE_NOT_EXIST (20160930/psparse-543)
  216. [ 0.162334] ACPI: Dynamic OEM Table Load:
  217. [ 0.162348] ACPI: SSDT 0xFFFF9C0EB602D000 00056E (v01 PmRef Cpu0Ist 00003000 INTL 20130117)
  218. [ 0.162827] ACPI: Dynamic OEM Table Load:
  219. [ 0.162838] ACPI: SSDT 0xFFFF9C0EB606D400 0003A5 (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
  220. [ 0.163719] ACPI: Dynamic OEM Table Load:
  221. [ 0.163729] ACPI: SSDT 0xFFFF9C0EB60B8E00 00015F (v01 PmRef ApIst 00003000 INTL 20130117)
  222. [ 0.164346] ACPI: Dynamic OEM Table Load:
  223. [ 0.164356] ACPI: SSDT 0xFFFF9C0EB60BAF00 00008D (v01 PmRef ApCst 00003000 INTL 20130117)
  224. [ 0.165643] ACPI : EC: EC started
  225. [ 0.290757] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
  226. [ 0.290761] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
  227. [ 0.290764] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
  228. [ 0.290765] ACPI: Interpreter enabled
  229. [ 0.290812] ACPI: (supports S0 S3 S4 S5)
  230. [ 0.290814] ACPI: Using IOAPIC for interrupt routing
  231. [ 0.290880] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  232. [ 0.294787] ACPI: Power Resource [USBC] (on)
  233. [ 0.302537] ACPI: Power Resource [CLK0] (on)
  234. [ 0.303003] ACPI: Power Resource [CLK0] (on)
  235. [ 0.303101] ACPI: Power Resource [CLK1] (on)
  236. [ 0.309236] ACPI: Power Resource [ID3C] (off)
  237. [ 0.351927] ACPI: Power Resource [FN00] (off)
  238. [ 0.353076] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  239. [ 0.353088] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
  240. [ 0.353179] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
  241. [ 0.353203] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
  242. [ 0.353915] PCI host bridge to bus 0000:00
  243. [ 0.353920] pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
  244. [ 0.353923] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
  245. [ 0.353926] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
  246. [ 0.353928] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
  247. [ 0.353931] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
  248. [ 0.353934] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
  249. [ 0.353937] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
  250. [ 0.353939] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
  251. [ 0.353942] pci_bus 0000:00: root bus resource [mem 0xfe800000-0xfe80ffff window]
  252. [ 0.353946] pci_bus 0000:00: root bus resource [bus 00-ff]
  253. [ 0.353959] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
  254. [ 0.354238] pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000
  255. [ 0.354264] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
  256. [ 0.354278] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
  257. [ 0.354288] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f]
  258. [ 0.354540] pci 0000:00:0b.0: [8086:22dc] type 00 class 0x118000
  259. [ 0.354562] pci 0000:00:0b.0: reg 0x10: [mem 0x91418000-0x91418fff 64bit]
  260. [ 0.354845] pci 0000:00:13.0: [8086:22a3] type 00 class 0x010601
  261. [ 0.354908] pci 0000:00:13.0: reg 0x20: [io 0x2060-0x207f]
  262. [ 0.354921] pci 0000:00:13.0: reg 0x24: [mem 0x9141f000-0x9141f7ff]
  263. [ 0.354987] pci 0000:00:13.0: PME# supported from D3hot
  264. [ 0.355193] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
  265. [ 0.355222] pci 0000:00:14.0: reg 0x10: [mem 0x91400000-0x9140ffff 64bit]
  266. [ 0.355328] pci 0000:00:14.0: PME# supported from D3hot D3cold
  267. [ 0.355475] pci 0000:00:14.0: System wakeup disabled by ACPI
  268. [ 0.355572] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
  269. [ 0.355595] pci 0000:00:1a.0: reg 0x10: [mem 0x91300000-0x913fffff]
  270. [ 0.355607] pci 0000:00:1a.0: reg 0x14: [mem 0x91200000-0x912fffff]
  271. [ 0.355706] pci 0000:00:1a.0: PME# supported from D0 D3hot
  272. [ 0.355976] pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300
  273. [ 0.356009] pci 0000:00:1b.0: reg 0x10: [mem 0x91410000-0x91413fff 64bit]
  274. [ 0.356335] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
  275. [ 0.356464] pci 0000:00:1b.0: System wakeup disabled by ACPI
  276. [ 0.356562] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
  277. [ 0.356676] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
  278. [ 0.356798] pci 0000:00:1c.0: System wakeup disabled by ACPI
  279. [ 0.356884] pci 0000:00:1c.1: [8086:22ca] type 01 class 0x060400
  280. [ 0.356996] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
  281. [ 0.357118] pci 0000:00:1c.1: System wakeup disabled by ACPI
  282. [ 0.357217] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
  283. [ 0.357535] pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500
  284. [ 0.357589] pci 0000:00:1f.3: reg 0x10: [mem 0x91419000-0x9141901f]
  285. [ 0.357706] pci 0000:00:1f.3: reg 0x20: [io 0x2040-0x205f]
  286. [ 0.358158] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
  287. [ 0.358185] pci 0000:01:00.0: reg 0x10: [io 0x1000-0x10ff]
  288. [ 0.358225] pci 0000:01:00.0: reg 0x18: [mem 0x91104000-0x91104fff 64bit]
  289. [ 0.358249] pci 0000:01:00.0: reg 0x20: [mem 0x91100000-0x91103fff 64bit]
  290. [ 0.358388] pci 0000:01:00.0: supports D1 D2
  291. [ 0.358391] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  292. [ 0.358483] pci 0000:01:00.0: System wakeup disabled by ACPI
  293. [ 0.366796] pci 0000:00:1c.0: PCI bridge to [bus 01]
  294. [ 0.366803] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
  295. [ 0.366808] pci 0000:00:1c.0: bridge window [mem 0x91100000-0x911fffff]
  296. [ 0.367043] pci 0000:02:00.0: [8086:3165] type 00 class 0x028000
  297. [ 0.367230] pci 0000:02:00.0: reg 0x10: [mem 0x91000000-0x91001fff 64bit]
  298. [ 0.368012] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
  299. [ 0.368204] pci 0000:02:00.0: System wakeup disabled by ACPI
  300. [ 0.378857] pci 0000:00:1c.1: PCI bridge to [bus 02]
  301. [ 0.378866] pci 0000:00:1c.1: bridge window [mem 0x91000000-0x910fffff]
  302. [ 1.419146] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
  303. [ 1.419289] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *7
  304. [ 1.419430] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
  305. [ 1.419570] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
  306. [ 1.419713] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
  307. [ 1.419854] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15)
  308. [ 1.420007] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
  309. [ 1.420154] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
  310. [ 1.430016] ACPI: Enabled 5 GPEs in block 00 to 3F
  311. [ 1.430185] ACPI : EC: event unblocked
  312. [ 1.430220] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
  313. [ 1.430224] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
  314. [ 1.430954] SCSI subsystem initialized
  315. [ 1.431038] libata version 3.00 loaded.
  316. [ 1.431130] pci 0000:00:02.0: vgaarb: setting as boot VGA device
  317. [ 1.431134] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
  318. [ 1.431144] pci 0000:00:02.0: vgaarb: bridge control possible
  319. [ 1.431145] vgaarb: loaded
  320. [ 1.431193] ACPI: bus type USB registered
  321. [ 1.431233] usbcore: registered new interface driver usbfs
  322. [ 1.431260] usbcore: registered new interface driver hub
  323. [ 1.431292] usbcore: registered new device driver usb
  324. [ 1.431552] PCI: Using ACPI for IRQ routing
  325. [ 1.434237] PCI: pci_cache_line_size set to 64 bytes
  326. [ 1.434339] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
  327. [ 1.434342] e820: reserve RAM buffer [mem 0x712b2000-0x73ffffff]
  328. [ 1.434344] e820: reserve RAM buffer [mem 0x7657f000-0x77ffffff]
  329. [ 1.434566] NetLabel: Initializing
  330. [ 1.434569] NetLabel: domain hash size = 128
  331. [ 1.434570] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  332. [ 1.434609] NetLabel: unlabeled traffic allowed by default
  333. [ 1.434857] clocksource: Switched to clocksource refined-jiffies
  334. [ 1.454103] VFS: Disk quotas dquot_6.6.0
  335. [ 1.454169] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  336. [ 1.454415] AppArmor: AppArmor Filesystem Enabled
  337. [ 1.454552] pnp: PnP ACPI init
  338. [ 1.454761] system 00:00: [io 0x0400-0x047f] has been reserved
  339. [ 1.454766] system 00:00: [io 0x0500-0x05fe] has been reserved
  340. [ 1.454770] system 00:00: [mem 0xfe800000-0xfe80ffff] has been reserved
  341. [ 1.454779] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
  342. [ 1.455270] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
  343. [ 1.458201] system 00:02: [mem 0x91422000-0x91422fff] has been reserved
  344. [ 1.458206] system 00:02: [mem 0x91420000-0x91420fff] has been reserved
  345. [ 1.458209] system 00:02: [mem 0x9141e000-0x9141efff] has been reserved
  346. [ 1.458213] system 00:02: [mem 0x9141c000-0x9141cfff] has been reserved
  347. [ 1.458216] system 00:02: [mem 0x9141a000-0x9141afff] has been reserved
  348. [ 1.458223] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
  349. [ 1.458428] system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved
  350. [ 1.458432] system 00:03: [mem 0xfea00000-0xfeafffff] has been reserved
  351. [ 1.458436] system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved
  352. [ 1.458439] system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved
  353. [ 1.458442] system 00:03: [mem 0xfed06000-0xfed06fff] has been reserved
  354. [ 1.458446] system 00:03: [mem 0xfed08000-0xfed09fff] has been reserved
  355. [ 1.458450] system 00:03: [mem 0xfed80000-0xfedbffff] could not be reserved
  356. [ 1.458453] system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved
  357. [ 1.458456] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
  358. [ 1.458463] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
  359. [ 1.458828] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
  360. [ 1.459297] pnp: PnP ACPI: found 5 devices
  361. [ 1.468393] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
  362. [ 1.468418] clocksource: Switched to clocksource acpi_pm
  363. [ 1.468463] pci 0000:00:1c.0: PCI bridge to [bus 01]
  364. [ 1.468469] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
  365. [ 1.468477] pci 0000:00:1c.0: bridge window [mem 0x91100000-0x911fffff]
  366. [ 1.468490] pci 0000:00:1c.1: PCI bridge to [bus 02]
  367. [ 1.468497] pci 0000:00:1c.1: bridge window [mem 0x91000000-0x910fffff]
  368. [ 1.468511] pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
  369. [ 1.468514] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
  370. [ 1.468517] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
  371. [ 1.468520] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
  372. [ 1.468523] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
  373. [ 1.468527] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
  374. [ 1.468530] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
  375. [ 1.468533] pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff window]
  376. [ 1.468536] pci_bus 0000:00: resource 12 [mem 0xfe800000-0xfe80ffff window]
  377. [ 1.468539] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
  378. [ 1.468542] pci_bus 0000:01: resource 1 [mem 0x91100000-0x911fffff]
  379. [ 1.468545] pci_bus 0000:02: resource 1 [mem 0x91000000-0x910fffff]
  380. [ 1.468822] NET: Registered protocol family 2
  381. [ 1.469198] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  382. [ 1.469538] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  383. [ 1.469924] TCP: Hash tables configured (established 65536 bind 65536)
  384. [ 1.470027] UDP hash table entries: 4096 (order: 5, 131072 bytes)
  385. [ 1.470117] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
  386. [ 1.470342] NET: Registered protocol family 1
  387. [ 1.470387] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
  388. [ 1.472339] PCI: CLS 64 bytes, default 64
  389. [ 1.472503] Unpacking initramfs...
  390. [ 2.819428] Freeing initrd memory: 42056K
  391. [ 2.819436] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  392. [ 2.819441] software IO TLB [mem 0x7257f000-0x7657f000] (64MB) mapped at [ffff9c0cb257f000-ffff9c0cb657efff]
  393. [ 2.819598] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns
  394. [ 2.819625] clocksource: Switched to clocksource tsc
  395. [ 2.819761] Scanning for low memory corruption every 60 seconds
  396. [ 2.820544] audit: initializing netlink subsys (disabled)
  397. [ 2.820628] audit: type=2000 audit(1492887594.811:1): initialized
  398. [ 2.821262] Initialise system trusted keyrings
  399. [ 2.821426] workingset: timestamp_bits=36 max_order=21 bucket_order=0
  400. [ 2.825178] zbud: loaded
  401. [ 2.826286] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  402. [ 2.826781] fuse init (API version 7.26)
  403. [ 2.830003] Key type asymmetric registered
  404. [ 2.830006] Asymmetric key parser 'x509' registered
  405. [ 2.830109] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  406. [ 2.830174] io scheduler noop registered
  407. [ 2.830176] io scheduler deadline registered
  408. [ 2.830196] io scheduler cfq registered (default)
  409. [ 2.831057] efifb: probing for efifb
  410. [ 2.831065] efifb: framebuffer at 0xa0000, using 64k, total 64k
  411. [ 2.831067] efifb: mode is 640x480x1, linelength=80, pages=1
  412. [ 2.831067] efifb: scrolling: redraw
  413. [ 2.831070] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
  414. [ 2.831263] Console: switching to colour frame buffer device 80x30
  415. [ 2.831284] fb0: EFI VGA frame buffer device
  416. [ 2.831300] intel_idle: MWAIT substates: 0x33000020
  417. [ 2.831302] intel_idle: v0.4.1 model 0x4C
  418. [ 2.831504] intel_idle: lapic_timer_reliable_states 0xffffffff
  419. [ 2.831702] ACPI: AC Adapter [ADP1] (on-line)
  420. [ 2.831947] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
  421. [ 2.831994] ACPI: Lid Switch [LID0]
  422. [ 2.832086] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
  423. [ 2.832092] ACPI: Sleep Button [SLPB]
  424. [ 2.832180] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
  425. [ 2.832184] ACPI: Power Button [PWRF]
  426. [ 2.836415] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
  427. [ 2.836871] thermal LNXTHERM:00: registered as thermal_zone0
  428. [ 2.836873] ACPI: Thermal Zone [TZ01] (57 C)
  429. [ 2.836943] GHES: HEST is not enabled!
  430. [ 2.837194] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
  431. [ 2.838382] ACPI: Battery Slot [BAT0] (battery present)
  432. [ 2.857806] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
  433. [ 2.861563] Linux agpgart interface v0.103
  434. [ 2.868399] loop: module loaded
  435. [ 2.868879] libphy: Fixed MDIO Bus: probed
  436. [ 2.868881] tun: Universal TUN/TAP device driver, 1.6
  437. [ 2.868883] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  438. [ 2.868973] PPP generic driver version 2.4.2
  439. [ 2.869089] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  440. [ 2.869095] ehci-pci: EHCI PCI platform driver
  441. [ 2.869130] ehci-platform: EHCI generic platform driver
  442. [ 2.869166] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  443. [ 2.869171] ohci-pci: OHCI PCI platform driver
  444. [ 2.869191] ohci-platform: OHCI generic platform driver
  445. [ 2.869209] uhci_hcd: USB Universal Host Controller Interface driver
  446. [ 2.869568] xhci_hcd 0000:00:14.0: xHCI Host Controller
  447. [ 2.869582] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
  448. [ 2.870735] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x01509810
  449. [ 2.870744] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
  450. [ 2.870945] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  451. [ 2.870949] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  452. [ 2.870952] usb usb1: Product: xHCI Host Controller
  453. [ 2.870954] usb usb1: Manufacturer: Linux 4.10.0-19-generic xhci-hcd
  454. [ 2.870957] usb usb1: SerialNumber: 0000:00:14.0
  455. [ 2.871231] hub 1-0:1.0: USB hub found
  456. [ 2.871263] hub 1-0:1.0: 7 ports detected
  457. [ 2.873737] xhci_hcd 0000:00:14.0: xHCI Host Controller
  458. [ 2.873747] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
  459. [ 2.873845] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  460. [ 2.873850] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  461. [ 2.873853] usb usb2: Product: xHCI Host Controller
  462. [ 2.873857] usb usb2: Manufacturer: Linux 4.10.0-19-generic xhci-hcd
  463. [ 2.873859] usb usb2: SerialNumber: 0000:00:14.0
  464. [ 2.874145] hub 2-0:1.0: USB hub found
  465. [ 2.874172] hub 2-0:1.0: 6 ports detected
  466. [ 2.875170] usb: port power management may be unreliable
  467. [ 2.876476] i8042: PNP: PS/2 Controller [PNP0303:KBD0] at 0x60,0x64 irq 1
  468. [ 2.876478] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
  469. [ 2.877599] serio: i8042 KBD port at 0x60,0x64 irq 1
  470. [ 2.877877] mousedev: PS/2 mouse device common for all mice
  471. [ 2.878320] rtc_cmos 00:04: RTC can wake from S4
  472. [ 2.878556] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
  473. [ 2.878604] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram
  474. [ 2.878616] i2c /dev entries driver
  475. [ 2.878771] device-mapper: uevent: version 1.0.3
  476. [ 2.878953] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
  477. [ 2.878962] intel_pstate: Intel P-state driver initializing
  478. [ 2.879449] ledtrig-cpu: registered to indicate activity on CPUs
  479. [ 2.880118] NET: Registered protocol family 10
  480. [ 2.887061] Segment Routing with IPv6
  481. [ 2.887101] NET: Registered protocol family 17
  482. [ 2.887123] Key type dns_resolver registered
  483. [ 2.887554] microcode: sig=0x406c4, pf=0x1, revision=0x408
  484. [ 2.887647] microcode: Microcode Update Driver: v2.2.
  485. [ 2.887885] registered taskstats version 1
  486. [ 2.887902] Loading compiled-in X.509 certificates
  487. [ 2.893034] Loaded X.509 cert 'Build time autogenerated kernel key: 8e99ee5b0fead84880b7849b477f2b92957907bc'
  488. [ 2.893084] zswap: loaded using pool lzo/zbud
  489. [ 2.915674] Key type big_key registered
  490. [ 2.915684] Key type trusted registered
  491. [ 2.918301] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
  492. [ 2.920005] Key type encrypted registered
  493. [ 2.920013] AppArmor: AppArmor sha1 policy hashing enabled
  494. [ 2.920018] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
  495. [ 2.920066] evm: HMAC attrs: 0x1
  496. [ 2.920699] Magic number: 13:991:999
  497. [ 2.920768] i8042 kbd 00:01: hash matches
  498. [ 2.920769] pnp0: hash matches
  499. [ 2.921083] rtc_cmos 00:04: setting system clock to 2017-04-22 18:59:55 UTC (1492887595)
  500. [ 2.921405] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  501. [ 2.921406] EDD information not available.
  502. [ 2.921528] PM: Hibernation image not present or could not be loaded.
  503. [ 2.925262] Freeing unused kernel memory: 2228K
  504. [ 2.925265] Write protecting the kernel read-only data: 14336k
  505. [ 2.926462] Freeing unused kernel memory: 1164K
  506. [ 2.927705] Freeing unused kernel memory: 280K
  507. [ 2.942713] x86/mm: Checked W+X mappings: passed, no W+X pages found.
  508. [ 2.974933] random: systemd-udevd: uninitialized urandom read (16 bytes read)
  509. [ 2.975089] random: systemd-udevd: uninitialized urandom read (16 bytes read)
  510. [ 2.975112] random: systemd-udevd: uninitialized urandom read (16 bytes read)
  511. [ 2.975982] random: udevadm: uninitialized urandom read (16 bytes read)
  512. [ 2.976054] random: udevadm: uninitialized urandom read (16 bytes read)
  513. [ 2.980165] random: udevadm: uninitialized urandom read (16 bytes read)
  514. [ 2.980202] random: udevadm: uninitialized urandom read (16 bytes read)
  515. [ 2.980407] random: udevadm: uninitialized urandom read (16 bytes read)
  516. [ 2.980527] random: udevadm: uninitialized urandom read (16 bytes read)
  517. [ 2.980656] random: udevadm: uninitialized urandom read (16 bytes read)
  518. [ 3.054173] sdhci: Secure Digital Host Controller Interface driver
  519. [ 3.054175] sdhci: Copyright(c) Pierre Ossman
  520. [ 3.066244] FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
  521. [ 3.076656] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
  522. [ 3.076868] hidraw: raw HID events driver (C) Jiri Kosina
  523. [ 3.099058] wmi: Mapper loaded
  524. [ 3.145594] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  525. [ 3.145608] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
  526. [ 3.152885] [drm] Initialized
  527. [ 3.158117] r8169 0000:01:00.0 eth0: RTL8168h/8111h at 0xffffbcdb40c99000, 30:65:ec:b8:8b:f2, XID 14100880 IRQ 307
  528. [ 3.158120] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
  529. [ 3.208427] usb 1-1: new low-speed USB device number 2 using xhci_hcd
  530. [ 3.337252] r8169 0000:01:00.0 enp1s0: renamed from eth0
  531. [ 3.363301] usb 1-1: New USB device found, idVendor=1bcf, idProduct=0005
  532. [ 3.363305] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
  533. [ 3.363310] usb 1-1: Product: USB Optical Mouse
  534. [ 3.484839] usb 1-3: new high-speed USB device number 3 using xhci_hcd
  535. [ 3.635357] usb 1-3: New USB device found, idVendor=04f2, idProduct=b520
  536. [ 3.635362] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  537. [ 3.635365] usb 1-3: Product: HD WebCam
  538. [ 3.635367] usb 1-3: Manufacturer: SunplusIT Inc
  539. [ 3.756679] usb 1-4: new full-speed USB device number 4 using xhci_hcd
  540. [ 3.900966] usb 1-4: New USB device found, idVendor=2386, idProduct=0401
  541. [ 3.900972] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  542. [ 3.900976] usb 1-4: Product: Raydium Touch System
  543. [ 3.900979] usb 1-4: Manufacturer: Raydium Corporation
  544. [ 4.020679] usb 1-5: new full-speed USB device number 5 using xhci_hcd
  545. [ 4.138108] mmc1: SDHCI controller on ACPI [80860F14:01] using ADMA
  546. [ 4.138405] ahci 0000:00:13.0: version 3.0
  547. [ 4.138824] ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
  548. [ 4.138829] ahci 0000:00:13.0: flags: 64bit ncq led clo only pio slum part deso sadm sds apst
  549. [ 4.141930] scsi host0: ahci
  550. [ 4.142489] scsi host1: ahci
  551. [ 4.142585] ata1: SATA max UDMA/133 abar m2048@0x9141f000 port 0x9141f100 irq 308
  552. [ 4.142588] ata2: SATA max UDMA/133 abar m2048@0x9141f000 port 0x9141f180 irq 308
  553. [ 4.143266] [drm] Memory usable by graphics device = 2048M
  554. [ 4.143270] checking generic (a0000 10000) vs hw (80000000 10000000)
  555. [ 4.143272] fb: switching to inteldrmfb from EFI VGA
  556. [ 4.143311] Console: switching to colour dummy device 80x25
  557. [ 4.144225] [drm] Replacing VGA console driver
  558. [ 4.144409] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  559. [ 4.144411] [drm] Driver supports precise vblank timestamp query.
  560. [ 4.154375] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
  561. [ 4.166649] usb 1-5: New USB device found, idVendor=8087, idProduct=0a2a
  562. [ 4.166656] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  563. [ 4.181855] usbcore: registered new interface driver usbhid
  564. [ 4.181857] usbhid: USB HID core driver
  565. [ 4.185876] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:1BCF:0005.0001/input/input4
  566. [ 4.186122] hid-generic 0003:1BCF:0005.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:14.0-1/input0
  567. [ 4.242892] random: fast init done
  568. [ 4.291149] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
  569. [ 4.291582] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
  570. [ 4.291706] [drm] Initialized i915 1.6.0 20161121 for 0000:00:02.0 on minor 0
  571. [ 4.394568] fbcon: inteldrmfb (fb0) is primary device
  572. [ 4.394671] Console: switching to colour frame buffer device 170x48
  573. [ 4.394704] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
  574. [ 4.452837] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  575. [ 4.454601] ata1.00: ATA-9: WDC WD5000LPVX-22V0TT0, 01.01A01, max UDMA/133
  576. [ 4.454606] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
  577. [ 4.456452] ata1.00: configured for UDMA/133
  578. [ 4.456763] ata2: SATA link down (SStatus 0 SControl 300)
  579. [ 4.457222] scsi 0:0:0:0: Direct-Access ATA WDC WD5000LPVX-2 1A01 PQ: 0 ANSI: 5
  580. [ 4.489142] sd 0:0:0:0: Attached scsi generic sg0 type 0
  581. [ 4.489458] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
  582. [ 4.489462] sd 0:0:0:0: [sda] 4096-byte physical blocks
  583. [ 4.489499] sd 0:0:0:0: [sda] Write Protect is off
  584. [ 4.489503] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  585. [ 4.489563] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  586. [ 4.503443] sda: sda1
  587. [ 4.504209] sd 0:0:0:0: [sda] Attached SCSI disk
  588. [ 9.856583] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
  589. [ 11.127030] ip_tables: (C) 2000-2006 Netfilter Core Team
  590. [ 11.249709] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
  591. [ 11.249941] systemd[1]: Detected architecture x86-64.
  592. [ 11.263807] systemd[1]: Set hostname to <lavinho-NC-R3-131T-C043>.
  593. [ 12.266462] random: crng init done
  594. [ 12.332821] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  595. [ 12.333022] systemd[1]: Listening on Journal Socket.
  596. [ 12.333058] systemd[1]: Reached target Remote File Systems.
  597. [ 12.333337] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  598. [ 12.333614] systemd[1]: Created slice User and Session Slice.
  599. [ 12.333681] systemd[1]: Listening on udev Kernel Socket.
  600. [ 12.333762] systemd[1]: Listening on udev Control Socket.
  601. [ 13.116789] lp: driver loaded but no devices found
  602. [ 13.267829] ppdev: user-space parallel port driver
  603. [ 15.809007] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
  604. [ 20.730117] Adding 2097148k swap on /swapfile. Priority:-1 extents:6 across:2260988k FS
  605. [ 20.748527] systemd-journald[223]: Received request to flush runtime journal from PID 1
  606. [ 21.204595] Bluetooth: Core ver 2.22
  607. [ 21.204621] NET: Registered protocol family 31
  608. [ 21.204623] Bluetooth: HCI device and connection manager initialized
  609. [ 21.204628] Bluetooth: HCI socket layer initialized
  610. [ 21.204631] Bluetooth: L2CAP socket layer initialized
  611. [ 21.204641] Bluetooth: SCO socket layer initialized
  612. [ 21.244846] Bluetooth: HCI UART driver ver 2.3
  613. [ 21.244849] Bluetooth: HCI UART protocol H4 registered
  614. [ 21.244850] Bluetooth: HCI UART protocol BCSP registered
  615. [ 21.244851] Bluetooth: HCI UART protocol LL registered
  616. [ 21.244852] Bluetooth: HCI UART protocol ATH3K registered
  617. [ 21.244853] Bluetooth: HCI UART protocol Three-wire (H5) registered
  618. [ 21.244924] Bluetooth: HCI UART protocol Intel registered
  619. [ 21.244956] Bluetooth: HCI UART protocol Broadcom registered
  620. [ 21.244957] Bluetooth: HCI UART protocol QCA registered
  621. [ 21.244958] Bluetooth: HCI UART protocol AG6XX registered
  622. [ 21.244958] Bluetooth: HCI UART protocol Marvell registered
  623. [ 21.372718] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
  624. [ 21.381564] nfc: nfc_init: NFC Core ver 0.1
  625. [ 21.381596] NET: Registered protocol family 39
  626. [ 21.409562] input: Intel Virtual Button driver as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input6
  627. [ 21.479916] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
  628. [ 21.480006] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
  629. [ 21.656963] usbcore: registered new interface driver btusb
  630. [ 21.679373] Bluetooth: hci0: read Intel version: 370810011003110e25
  631. [ 21.679376] Bluetooth: hci0: Intel device is already patched. patch num: 25
  632. [ 21.680944] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  633. [ 21.737886] input: Raydium Corporation Raydium Touch System as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:2386:0401.0002/input/input10
  634. [ 21.738141] hid-multitouch 0003:2386:0401.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [Raydium Corporation Raydium Touch System] on usb-0000:00:14.0-4/input0
  635. [ 21.748013] media: Linux media interface: v0.10
  636. [ 21.753776] hid-multitouch 0018:04F3:3010.0004: Ignoring the extra HID_DG_INPUTMODE
  637. [ 21.753891] input: ELAN0501:00 04F3:3010 Touchpad as /devices/pci0000:00/808622C1:05/i2c-10/i2c-ELAN0501:00/0018:04F3:3010.0004/input/input19
  638. [ 21.754066] hid-multitouch 0018:04F3:3010.0004: input,hidraw2: I2C HID v1.00 Mouse [ELAN0501:00 04F3:3010] on i2c-ELAN0501:00
  639. [ 21.847454] Linux video capture interface: v2.00
  640. [ 21.908465] Intel(R) Wireless WiFi driver for Linux
  641. [ 21.908466] Copyright(c) 2003- 2015 Intel Corporation
  642. [ 21.957931] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-26.ucode failed with error -2
  643. [ 21.957962] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-25.ucode failed with error -2
  644. [ 21.957986] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-24.ucode failed with error -2
  645. [ 21.958014] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-23.ucode failed with error -2
  646. [ 21.981181] iwlwifi 0000:02:00.0: loaded firmware version 22.391740.0 op_mode iwlmvm
  647. [ 22.045867] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3165, REV=0x210
  648. [ 22.047985] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
  649. [ 22.048211] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
  650. [ 22.055510] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b520)
  651. [ 22.067036] uvcvideo 1-3:1.0: Entity type for entity Extension 4 was not initialized!
  652. [ 22.067041] uvcvideo 1-3:1.0: Entity type for entity Extension 3 was not initialized!
  653. [ 22.067043] uvcvideo 1-3:1.0: Entity type for entity Processing 2 was not initialized!
  654. [ 22.067046] uvcvideo 1-3:1.0: Entity type for entity Camera 1 was not initialized!
  655. [ 22.067178] input: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input20
  656. [ 22.067296] usbcore: registered new interface driver uvcvideo
  657. [ 22.067297] USB Video Class driver (1.1.1)
  658. [ 22.081143] SSE version of gcm_enc/dec engaged.
  659. [ 22.130131] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
  660. [ 22.407911] acer_wmi: Acer Laptop ACPI-WMI Extras
  661. [ 22.407930] acer_wmi: Function bitmap for Communication Button: 0x801
  662. [ 22.424605] acer_wmi: Enabling Launch Manager failed: 0xe4 - 0x0
  663. [ 22.424730] input: Acer WMI hotkeys as /devices/virtual/input/input21
  664. [ 22.425633] input: Acer BMA150 accelerometer as /devices/virtual/input/input22
  665. [ 22.591043] audit: type=1400 audit(1492887615.164:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=395 comm="apparmor_parser"
  666. [ 22.591999] audit: type=1400 audit(1492887615.164:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=395 comm="apparmor_parser"
  667. [ 22.592850] audit: type=1400 audit(1492887615.168:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=395 comm="apparmor_parser"
  668. [ 22.595286] audit: type=1400 audit(1492887615.168:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=395 comm="apparmor_parser"
  669. [ 22.616174] intel_rapl: Found RAPL domain package
  670. [ 22.616177] intel_rapl: Found RAPL domain core
  671. [ 22.740820] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
  672. [ 22.782705] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
  673. [ 22.875966] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
  674. [ 22.875969] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
  675. [ 22.875972] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
  676. [ 22.875973] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
  677. [ 22.875975] snd_hda_codec_realtek hdaudioC0D0: inputs:
  678. [ 22.875977] snd_hda_codec_realtek hdaudioC0D0: Mic=0x12
  679. [ 22.956599] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
  680. [ 22.956711] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24
  681. [ 23.171715] audit: type=1400 audit(1492887615.744:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=398 comm="apparmor_parser"
  682. [ 23.177143] audit: type=1400 audit(1492887615.752:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=398 comm="apparmor_parser"
  683. [ 23.709396] audit: type=1400 audit(1492887616.284:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=641 comm="apparmor_parser"
  684. [ 23.709999] audit: type=1400 audit(1492887616.284:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=641 comm="apparmor_parser"
  685. [ 24.603271] audit: type=1400 audit(1492887617.176:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=643 comm="apparmor_parser"
  686. [ 24.604832] audit: type=1400 audit(1492887617.180:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=643 comm="apparmor_parser"
  687. [ 29.860050] kauditd_printk_skb: 6 callbacks suppressed
  688. [ 29.860055] audit: type=1400 audit(1492887622.432:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=588 comm="apparmor_parser"
  689. [ 29.861622] audit: type=1400 audit(1492887622.436:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=588 comm="apparmor_parser"
  690. [ 29.864165] audit: type=1400 audit(1492887622.436:16): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=588 comm="apparmor_parser"
  691. [ 29.865589] audit: type=1400 audit(1492887622.440:17): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=588 comm="apparmor_parser"
  692. [ 29.867888] audit: type=1400 audit(1492887622.440:18): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=588 comm="apparmor_parser"
  693. [ 29.868973] audit: type=1400 audit(1492887622.444:19): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=588 comm="apparmor_parser"
  694. [ 30.087702] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  695. [ 30.087705] Bluetooth: BNEP filters: protocol multicast
  696. [ 30.087711] Bluetooth: BNEP socket layer initialized
  697. [ 30.256269] systemd[1]: motd-news.timer: Adding 3min 39.551542s random time.
  698. [ 30.256676] systemd[1]: apt-daily.timer: Adding 2h 51min 42.858367s random time.
  699. [ 30.257774] systemd[1]: snapd.refresh.timer: Adding 3h 8min 42.037064s random time.
  700. [ 30.257790] systemd[1]: snapd.refresh.timer: Adding 3h 52min 28.146089s random time.
  701. [ 30.505724] systemd[1]: motd-news.timer: Adding 55min 6.658705s random time.
  702. [ 30.505923] systemd[1]: apt-daily.timer: Adding 9h 33min 36.207353s random time.
  703. [ 30.507005] systemd[1]: snapd.refresh.timer: Adding 1h 38min 47.848952s random time.
  704. [ 30.507022] systemd[1]: snapd.refresh.timer: Adding 4h 21min 36.139846s random time.
  705. [ 32.689329] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
  706. [ 32.747534] r8169 0000:01:00.0 enp1s0: link down
  707. [ 32.747567] r8169 0000:01:00.0 enp1s0: link down
  708. [ 32.747795] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
  709. [ 32.755192] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
  710. [ 32.756893] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
  711. [ 32.757125] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
  712. [ 32.824109] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
  713. [ 32.824329] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
  714. [ 32.839474] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
  715. [ 32.847528] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
  716. [ 32.847756] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
  717. [ 32.916167] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
  718. [ 32.916462] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
  719. [ 32.938399] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
  720. [ 33.168572] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
  721. [ 34.331388] r8169 0000:01:00.0 enp1s0: link up
  722. [ 34.331421] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
  723. [ 36.775439] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
  724. [ 36.841346] wlp2s0: authenticate with f0:f2:49:d8:f6:f8
  725. [ 36.846509] wlp2s0: send auth to f0:f2:49:d8:f6:f8 (try 1/3)
  726. [ 36.848934] wlp2s0: authenticated
  727. [ 36.852562] wlp2s0: associate with f0:f2:49:d8:f6:f8 (try 1/3)
  728. [ 36.869197] wlp2s0: RX AssocResp from f0:f2:49:d8:f6:f8 (capab=0x431 status=0 aid=1)
  729. [ 36.871564] wlp2s0: associated
  730. [ 36.871683] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
  731. [ 41.406723] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
  732. [ 41.406772] mce: [Hardware Error]: Machine check events logged
  733. [ 41.406852] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 128: 00000000882003cf
  734. [ 41.406866] mce: [Hardware Error]: TSC 17216c2824
  735. [ 41.406925] mce: [Hardware Error]: PROCESSOR 0:406c4 TIME 1492887633 SOCKET 0 APIC 0 microcode 408
  736. [ 41.408169] CPU0: Core temperature/speed normal
  737. [ 41.408185] mce: [Hardware Error]: Machine check events logged
  738. [ 41.409748] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 128: 00000000882003ca
  739. [ 41.409762] mce: [Hardware Error]: TSC 17218f09d4
  740. [ 41.409779] mce: [Hardware Error]: PROCESSOR 0:406c4 TIME 1492887633 SOCKET 0 APIC 0 microcode 408
  741. [ 45.188722] systemd[1]: motd-news.timer: Adding 40min 6.162150s random time.
  742. [ 45.189169] systemd[1]: apt-daily.timer: Adding 3h 28min 14.728907s random time.
  743. [ 45.191344] systemd[1]: snapd.refresh.timer: Adding 1h 9min 48.682555s random time.
  744. [ 45.191361] systemd[1]: snapd.refresh.timer: Adding 2h 59min 59.462558s random time.
  745. [ 55.481216] systemd[1]: motd-news.timer: Adding 45min 47.861368s random time.
  746. [ 55.481767] systemd[1]: apt-daily.timer: Adding 8h 10min 37.724627s random time.
  747. [ 55.484532] systemd[1]: snapd.refresh.timer: Adding 32min 49.888028s random time.
  748. [ 55.484554] systemd[1]: snapd.refresh.timer: Adding 5h 22min 40.491523s random time.
  749. [ 64.125634] wlp2s0: deauthenticating from f0:f2:49:d8:f6:f8 by local choice (Reason: 3=DEAUTH_LEAVING)
  750. [ 64.140193] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
  751. [ 65.786246] systemd[1]: motd-news.timer: Adding 27.060916s random time.
  752. [ 65.786677] systemd[1]: apt-daily.timer: Adding 3h 41min 56.937432s random time.
  753. [ 65.788826] systemd[1]: snapd.refresh.timer: Adding 2h 26min 48.471313s random time.
  754. [ 65.788844] systemd[1]: snapd.refresh.timer: Adding 3h 32min 54.886560s random time.
  755. [ 76.053120] systemd[1]: apt-daily.timer: Adding 5h 14min 12.281393s random time.
  756. [ 76.055183] systemd[1]: snapd.refresh.timer: Adding 55min 54.418046s random time.
  757. [ 76.055201] systemd[1]: snapd.refresh.timer: Adding 3h 14min 23.037640s random time.
  758. [ 87.088618] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
  759. [ 91.087892] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
  760. [ 91.092273] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
  761. [ 91.105666] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
  762. [ 91.901191] wlp2s0: authenticate with f0:f2:49:d8:f6:f8
  763. [ 91.904755] wlp2s0: send auth to f0:f2:49:d8:f6:f8 (try 1/3)
  764. [ 91.910675] wlp2s0: authenticated
  765. [ 92.518997] iwlwifi 0000:02:00.0: No association and the time event is over already...
  766. [ 92.519113] wlp2s0: Connection to AP f0:f2:49:d8:f6:f8 lost
  767. [ 96.908743] wlp2s0: aborting authentication with f0:f2:49:d8:f6:f8 by local choice (Reason: 3=DEAUTH_LEAVING)
  768. [ 97.857445] wlp2s0: authenticate with f0:f2:49:d8:f6:f8
  769. [ 97.863383] wlp2s0: send auth to f0:f2:49:d8:f6:f8 (try 1/3)
  770. [ 97.865961] wlp2s0: authenticated
  771. [ 98.477517] iwlwifi 0000:02:00.0: No association and the time event is over already...
  772. [ 98.477594] wlp2s0: Connection to AP f0:f2:49:d8:f6:f8 lost
  773. [ 102.868712] wlp2s0: aborting authentication with f0:f2:49:d8:f6:f8 by local choice (Reason: 3=DEAUTH_LEAVING)
  774. [ 106.861855] wlp2s0: authenticate with f0:f2:49:d8:f6:f8
  775. [ 106.868800] wlp2s0: send auth to f0:f2:49:d8:f6:f8 (try 1/3)
  776. [ 106.876508] wlp2s0: authenticated
  777. [ 107.482697] iwlwifi 0000:02:00.0: No association and the time event is over already...
  778. [ 107.482778] wlp2s0: Connection to AP f0:f2:49:d8:f6:f8 lost
  779. [ 111.872501] wlp2s0: aborting authentication with f0:f2:49:d8:f6:f8 by local choice (Reason: 3=DEAUTH_LEAVING)
  780. [ 113.720570] wlp2s0: authenticate with f0:f2:49:d8:f6:f8
  781. [ 113.729702] wlp2s0: send auth to f0:f2:49:d8:f6:f8 (try 1/3)
  782. [ 113.735103] wlp2s0: authenticated
  783. [ 114.343994] iwlwifi 0000:02:00.0: No association and the time event is over already...
  784. [ 114.344035] wlp2s0: Connection to AP f0:f2:49:d8:f6:f8 lost
  785. [ 116.014436] wlp2s0: aborting authentication with f0:f2:49:d8:f6:f8 by local choice (Reason: 3=DEAUTH_LEAVING)
  786. [ 116.021175] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
  787. [ 116.025891] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
  788. [ 116.260302] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
  789. [ 116.322137] wlp2s0: authenticate with f0:f2:49:d8:f6:f8
  790. [ 116.326361] wlp2s0: send auth to f0:f2:49:d8:f6:f8 (try 1/3)
  791. [ 116.328898] wlp2s0: authenticated
  792. [ 116.332565] wlp2s0: associate with f0:f2:49:d8:f6:f8 (try 1/3)
  793. [ 116.348687] wlp2s0: RX AssocResp from f0:f2:49:d8:f6:f8 (capab=0x431 status=0 aid=1)
  794. [ 116.350090] wlp2s0: associated
  795. [ 116.350165] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
  796. [ 127.555635] systemd[1]: apt-daily.timer: Adding 11h 31min 55.980939s random time.
  797. [ 127.557723] systemd[1]: snapd.refresh.timer: Adding 1h 15min 44.823247s random time.
  798. [ 127.557741] systemd[1]: snapd.refresh.timer: Adding 2h 15min 11.815313s random time.
  799. [ 137.884190] systemd[1]: apt-daily.timer: Adding 9h 12min 2.131283s random time.
  800. [ 137.886526] systemd[1]: snapd.refresh.timer: Adding 2h 18min 7.583054s random time.
  801. [ 137.886544] systemd[1]: snapd.refresh.timer: Adding 1h 18min 48.231310s random time.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement