Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 3.18.0-031800-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201412071935 SMP Mon Dec 8 00:36:34 UTC 2014
- [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.18.0-031800-generic root=UUID=27b2a16f-f40c-4fef-bc7f-65368fd0f5f8 ro quiet splash crashkernel=384M-:128M crashkernel=384M-:128M crashkernel=384M-:128M crashkernel=384M-:128M vt.handoff=7
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007c9a173f] usable
- [ 0.000000] BIOS-e820: [mem 0x000000007c9a1740-0x000000007c9a379f] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x000000007c9a37a0-0x000000007effffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fed3ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed45000-0x00000000ffffffff] reserved
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] SMBIOS 2.6 present.
- [ 0.000000] DMI: Hewlett-Packard HP Compaq 6000 Pro SFF PC/3048h, BIOS 786G2 v01.09 08/25/2009
- [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] AGP: No AGP bridge found
- [ 0.000000] e820: last_pfn = 0x7c9a1 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-E3FFF write-protect
- [ 0.000000] E4000-EFFFF write-back
- [ 0.000000] F0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000 mask F80000000 write-back
- [ 0.000000] 1 base 07CA00000 mask FFFE00000 uncachable
- [ 0.000000] 2 base 07CC00000 mask FFFC00000 uncachable
- [ 0.000000] 3 base 07D000000 mask FFF000000 uncachable
- [ 0.000000] 4 base 07E000000 mask FFE000000 uncachable
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] original variable MTRRs
- [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
- [ 0.000000] reg 1, base: 1994MB, range: 2MB, type UC
- [ 0.000000] reg 2, base: 1996MB, range: 4MB, type UC
- [ 0.000000] reg 3, base: 2000MB, range: 16MB, type UC
- [ 0.000000] reg 4, base: 2016MB, range: 32MB, type UC
- [ 0.000000] total RAM covered: 1994M
- [ 0.000000] Found optimal setting for mtrr clean up
- [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 5 lose cover RAM: 0G
- [ 0.000000] New variable MTRRs
- [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
- [ 0.000000] reg 1, base: 1994MB, range: 2MB, type UC
- [ 0.000000] reg 2, base: 1996MB, range: 4MB, type UC
- [ 0.000000] reg 3, base: 2000MB, range: 16MB, type UC
- [ 0.000000] reg 4, base: 2016MB, range: 32MB, type UC
- [ 0.000000] found SMP MP-table at [mem 0x000f9bf0-0x000f9bff] mapped at [ffff8800000f9bf0]
- [ 0.000000] Scanning 1 areas for low memory corruption
- [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
- [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
- [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
- [ 0.000000] BRK [0x01fd1000, 0x01fd1fff] PGTABLE
- [ 0.000000] BRK [0x01fd2000, 0x01fd2fff] PGTABLE
- [ 0.000000] BRK [0x01fd3000, 0x01fd3fff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0x7c600000-0x7c7fffff]
- [ 0.000000] [mem 0x7c600000-0x7c7fffff] page 2M
- [ 0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7c5fffff]
- [ 0.000000] [mem 0x7c000000-0x7c5fffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff]
- [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
- [ 0.000000] [mem 0x00200000-0x7bffffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x7c800000-0x7c9a0fff]
- [ 0.000000] [mem 0x7c800000-0x7c9a0fff] page 4k
- [ 0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE
- [ 0.000000] RAMDISK: [mem 0x35bc0000-0x36dd7fff]
- [ 0.000000] ACPI: Early table checksum verification disabled
- [ 0.000000] ACPI: RSDP 0x00000000000E5810 000014 (v00 COMPAQ)
- [ 0.000000] ACPI: RSDT 0x000000007C9C5840 000040 (v01 HPQOEM SLIC-BPC 20090825 00000000)
- [ 0.000000] ACPI: FACP 0x000000007C9C58E8 000074 (v01 COMPAQ EAGLLAKE 00000001 00000000)
- [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000050/0x0 (20140926/tbfadt-649)
- [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 0, using default 8 (20140926/tbfadt-699)
- [ 0.000000] ACPI: DSDT 0x000000007C9C5C5F 009F6C (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E)
- [ 0.000000] ACPI: FACS 0x000000007C9C5800 000040
- [ 0.000000] ACPI: APIC 0x000000007C9C595C 000084 (v01 COMPAQ EAGLLAKE 00000001 00000000)
- [ 0.000000] ACPI: ASF! 0x000000007C9C59E0 000063 (v32 COMPAQ EAGLLAKE 00000001 00000000)
- [ 0.000000] ACPI: MCFG 0x000000007C9C5A43 00003C (v01 COMPAQ EAGLLAKE 00000001 00000000)
- [ 0.000000] ACPI: TCPA 0x000000007C9C5A7F 000032 (v01 COMPAQ EAGLLAKE 00000001 00000000)
- [ 0.000000] ACPI: SLIC 0x000000007C9C5AB1 000176 (v01 HPQOEM SLIC-BPC 00000001 00000000)
- [ 0.000000] ACPI: HPET 0x000000007C9C5C27 000038 (v01 COMPAQ EAGLLAKE 00000001 00000000)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007c9a0fff]
- [ 0.000000] NODE_DATA(0) allocated [mem 0x7c99c000-0x7c9a0fff]
- [ 0.000000] Reserving 128MB of memory at 720MB for crashkernel (System RAM: 1993MB)
- [ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007a000000-ffff88007bffffff] on node 0
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
- [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00001000-0x0009efff]
- [ 0.000000] node 0: [mem 0x00100000-0x7c9a0fff]
- [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x7c9a0fff]
- [ 0.000000] On node 0 totalpages: 510271
- [ 0.000000] DMA zone: 64 pages used for memmap
- [ 0.000000] DMA zone: 21 pages reserved
- [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 7911 pages used for memmap
- [ 0.000000] DMA32 zone: 506273 pages, LIFO batch:31
- [ 0.000000] Reserving Intel graphics stolen memory at 0x7d000000-0x7effffff
- [ 0.000000] ACPI: PM-Timer IO Port: 0xf808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
- [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
- [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e7fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000e8000-0x000fffff]
- [ 0.000000] e820: [mem 0x7f000000-0xf3ffffff] available for PCI devices
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88007c600000 s82880 r8192 d31808 u524288
- [ 0.000000] pcpu-alloc: s82880 r8192 d31808 u524288 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3
- [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 502275
- [ 0.000000] Policy zone: DMA32
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.18.0-031800-generic root=UUID=27b2a16f-f40c-4fef-bc7f-65368fd0f5f8 ro quiet splash crashkernel=384M-:128M crashkernel=384M-:128M crashkernel=384M-:128M crashkernel=384M-:128M vt.handoff=7
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240 using standard form
- [ 0.000000] AGP: Checking aperture...
- [ 0.000000] AGP: No AGP bridge found
- [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
- [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- [ 0.000000] Memory: 1841660K/2041084K available (7904K kernel code, 1156K rwdata, 3792K rodata, 1392K init, 1316K bss, 199424K reserved)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
- [ 0.000000] NR_IRQS:16640 nr_irqs:456 0
- [ 0.000000] Offload RCU callbacks from all CPUs
- [ 0.000000] Offload RCU callbacks from CPUs: 0-3.
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] allocated 8388608 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] hpet clockevent registered
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.000000] tsc: Detected 2792.931 MHz processor
- [ 0.008014] Calibrating delay loop (skipped), value calculated using timer frequency.. 5585.86 BogoMIPS (lpj=11171724)
- [ 0.008017] pid_max: default: 32768 minimum: 301
- [ 0.008027] ACPI: Core revision 20140926
- [ 0.010869] ACPI: All ACPI Tables successfully acquired
- [ 0.012032] Security Framework initialized
- [ 0.012051] AppArmor: AppArmor initialized
- [ 0.012053] Yama: becoming mindful.
- [ 0.012237] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.013058] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.013579] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.013583] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.016107] Initializing cgroup subsys memory
- [ 0.016116] Initializing cgroup subsys devices
- [ 0.016120] Initializing cgroup subsys freezer
- [ 0.016123] Initializing cgroup subsys net_cls
- [ 0.016126] Initializing cgroup subsys blkio
- [ 0.016128] Initializing cgroup subsys perf_event
- [ 0.016131] Initializing cgroup subsys net_prio
- [ 0.016134] Initializing cgroup subsys hugetlb
- [ 0.016160] CPU: Physical Processor ID: 0
- [ 0.016161] CPU: Processor Core ID: 0
- [ 0.016164] mce: CPU supports 6 MCE banks
- [ 0.016171] CPU0: Thermal monitoring enabled (TM2)
- [ 0.016179] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
- [ 0.016179] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
- [ 0.016280] Freeing SMP alternatives memory: 28K (ffffffff81e7f000 - ffffffff81e86000)
- [ 0.017639] ftrace: allocating 32477 entries in 127 pages
- [ 0.024456] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.067616] smpboot: CPU0: Intel Pentium(R) Dual-Core CPU E6300 @ 2.80GHz (fam: 06, model: 17, stepping: 0a)
- [ 0.068000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
- [ 0.068000] ... version: 2
- [ 0.068000] ... bit width: 40
- [ 0.068000] ... generic registers: 2
- [ 0.068000] ... value mask: 000000ffffffffff
- [ 0.068000] ... max period: 000000007fffffff
- [ 0.068000] ... fixed-purpose events: 3
- [ 0.068000] ... event mask: 0000000700000003
- [ 0.068000] x86: Booting SMP configuration:
- [ 0.068000] .... node #0, CPUs: #1
- [ 0.078781] x86: Booted up 1 node, 2 CPUs
- [ 0.078786] smpboot: Total of 2 processors activated (11171.72 BogoMIPS)
- [ 0.078848] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
- [ 0.080106] devtmpfs: initialized
- [ 0.081286] evm: security.selinux
- [ 0.081288] evm: security.SMACK64
- [ 0.081289] evm: security.SMACK64EXEC
- [ 0.081290] evm: security.SMACK64TRANSMUTE
- [ 0.081291] evm: security.SMACK64MMAP
- [ 0.081292] evm: security.ima
- [ 0.081293] evm: security.capability
- [ 0.084041] PM: Registering ACPI NVS region [mem 0x7c9a1740-0x7c9a379f] (8288 bytes)
- [ 0.084049] reboot: HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
- [ 0.085080] pinctrl core: initialized pinctrl subsystem
- [ 0.085080] regulator-dummy: no parameters
- [ 0.085080] RTC time: 19:22:56, date: 09/11/15
- [ 0.085080] NET: Registered protocol family 16
- [ 0.088009] cpuidle: using governor ladder
- [ 0.092010] cpuidle: using governor menu
- [ 0.092113] ACPI: bus type PCI registered
- [ 0.092117] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- [ 0.092222] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
- [ 0.092225] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
- [ 0.092324] PCI: Using configuration type 1 for base access
- [ 0.096098] ACPI: Added _OSI(Module Device)
- [ 0.096098] ACPI: Added _OSI(Processor Device)
- [ 0.096098] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.096098] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.112061] ACPI: Dynamic OEM Table Load:
- [ 0.112070] ACPI: SSDT 0xFFFF880078E6A800 0003AC (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E)
- [ 0.124017] ACPI: Dynamic OEM Table Load:
- [ 0.124024] ACPI: SSDT 0xFFFF880078E6AC00 0002B0 (v01 COMPAQ CST 00000001 MSFT 0100000E)
- [ 0.136212] ACPI: Interpreter enabled
- [ 0.136218] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
- [ 0.136222] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
- [ 0.136235] ACPI: (supports S0 S3 S4 S5)
- [ 0.136237] ACPI: Using IOAPIC for interrupt routing
- [ 0.136259] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.143391] acpi LNXCPU:00: Invalid PBLK length [7]
- [ 0.143402] acpi LNXCPU:01: Invalid PBLK length [7]
- [ 0.144213] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.144219] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
- [ 0.144223] ACPI BIOS Error (bug): \_SB_.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20140926/nsarguments-189)
- [ 0.144262] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20140926/dsfield-211)
- [ 0.144267] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff880079c28de8), AE_ALREADY_EXISTS (20140926/psparse-536)
- [ 0.144275] acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM
- [ 0.144531] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
- [ 0.144679] PCI host bridge to bus 0000:00
- [ 0.144682] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 0.144684] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfebfffff]
- [ 0.144686] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
- [ 0.144688] pci_bus 0000:00: root bus resource [io 0x1000-0x2fff]
- [ 0.144690] pci_bus 0000:00: root bus resource [io 0x3000-0x6fff]
- [ 0.144691] pci_bus 0000:00: root bus resource [io 0x7000-0xafff]
- [ 0.144693] pci_bus 0000:00: root bus resource [io 0xb000-0xffff]
- [ 0.144695] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
- [ 0.144697] pci_bus 0000:00: root bus resource [mem 0x7f000000-0xf3ffffff]
- [ 0.144698] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
- [ 0.144707] pci 0000:00:00.0: [8086:2e10] type 00 class 0x060000
- [ 0.144727] DMAR: Forcing write-buffer flush capability
- [ 0.144728] DMAR: Disabling IOMMU for graphics on this chipset
- [ 0.144801] pci 0000:00:02.0: [8086:2e12] type 00 class 0x030000
- [ 0.144811] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
- [ 0.144817] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
- [ 0.144822] pci 0000:00:02.0: reg 0x20: [io 0x1230-0x1237]
- [ 0.144905] pci 0000:00:02.1: [8086:2e13] type 00 class 0x038000
- [ 0.144913] pci 0000:00:02.1: reg 0x10: [mem 0xf0400000-0xf04fffff 64bit]
- [ 0.145004] pci 0000:00:03.0: [8086:2e14] type 00 class 0x078000
- [ 0.145027] pci 0000:00:03.0: reg 0x10: [mem 0xf0527100-0xf052710f 64bit]
- [ 0.145109] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
- [ 0.145181] pci 0000:00:03.2: [8086:2e16] type 00 class 0x010185
- [ 0.145195] pci 0000:00:03.2: reg 0x10: [io 0x1238-0x123f]
- [ 0.145202] pci 0000:00:03.2: reg 0x14: [io 0x1260-0x1263]
- [ 0.145209] pci 0000:00:03.2: reg 0x18: [io 0x1240-0x1247]
- [ 0.145215] pci 0000:00:03.2: reg 0x1c: [io 0x1264-0x1267]
- [ 0.145222] pci 0000:00:03.2: reg 0x20: [io 0x1220-0x122f]
- [ 0.145312] pci 0000:00:03.3: [8086:2e17] type 00 class 0x070002
- [ 0.145330] pci 0000:00:03.3: reg 0x10: [io 0x1248-0x124f]
- [ 0.145339] pci 0000:00:03.3: reg 0x14: [mem 0xf0524000-0xf0524fff]
- [ 0.145511] pci 0000:00:19.0: [8086:10de] type 00 class 0x020000
- [ 0.145527] pci 0000:00:19.0: reg 0x10: [mem 0xf0500000-0xf051ffff]
- [ 0.145535] pci 0000:00:19.0: reg 0x14: [mem 0xf0525000-0xf0525fff]
- [ 0.145542] pci 0000:00:19.0: reg 0x18: [io 0x1100-0x111f]
- [ 0.145598] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
- [ 0.145636] pci 0000:00:19.0: System wakeup disabled by ACPI
- [ 0.145682] pci 0000:00:1a.0: [8086:3a67] type 00 class 0x0c0300
- [ 0.145720] pci 0000:00:1a.0: reg 0x20: [io 0x1120-0x113f]
- [ 0.145786] pci 0000:00:1a.0: System wakeup disabled by ACPI
- [ 0.145829] pci 0000:00:1a.1: [8086:3a68] type 00 class 0x0c0300
- [ 0.145867] pci 0000:00:1a.1: reg 0x20: [io 0x1140-0x115f]
- [ 0.145932] pci 0000:00:1a.1: System wakeup disabled by ACPI
- [ 0.145976] pci 0000:00:1a.2: [8086:3a69] type 00 class 0x0c0300
- [ 0.146013] pci 0000:00:1a.2: reg 0x20: [io 0x1160-0x117f]
- [ 0.146079] pci 0000:00:1a.2: System wakeup disabled by ACPI
- [ 0.146131] pci 0000:00:1a.7: [8086:3a6c] type 00 class 0x0c0320
- [ 0.146149] pci 0000:00:1a.7: reg 0x10: [mem 0xf0526800-0xf0526bff]
- [ 0.146231] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
- [ 0.146269] pci 0000:00:1a.7: System wakeup disabled by ACPI
- [ 0.146315] pci 0000:00:1b.0: [8086:3a6e] type 00 class 0x040300
- [ 0.146330] pci 0000:00:1b.0: reg 0x10: [mem 0xf0520000-0xf0523fff 64bit]
- [ 0.146395] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.146470] pci 0000:00:1c.0: [8086:3a70] type 01 class 0x060400
- [ 0.146537] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.146576] pci 0000:00:1c.0: System wakeup disabled by ACPI
- [ 0.146620] pci 0000:00:1c.1: [8086:3a72] type 01 class 0x060400
- [ 0.146686] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
- [ 0.146725] pci 0000:00:1c.1: System wakeup disabled by ACPI
- [ 0.146773] pci 0000:00:1d.0: [8086:3a64] type 00 class 0x0c0300
- [ 0.146810] pci 0000:00:1d.0: reg 0x20: [io 0x1180-0x119f]
- [ 0.146876] pci 0000:00:1d.0: System wakeup disabled by ACPI
- [ 0.146922] pci 0000:00:1d.1: [8086:3a65] type 00 class 0x0c0300
- [ 0.146959] pci 0000:00:1d.1: reg 0x20: [io 0x11a0-0x11bf]
- [ 0.147027] pci 0000:00:1d.1: System wakeup disabled by ACPI
- [ 0.147071] pci 0000:00:1d.2: [8086:3a66] type 00 class 0x0c0300
- [ 0.147108] pci 0000:00:1d.2: reg 0x20: [io 0x11c0-0x11df]
- [ 0.147174] pci 0000:00:1d.2: System wakeup disabled by ACPI
- [ 0.147225] pci 0000:00:1d.7: [8086:3a6a] type 00 class 0x0c0320
- [ 0.147244] pci 0000:00:1d.7: reg 0x10: [mem 0xf0526c00-0xf0526fff]
- [ 0.147325] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
- [ 0.147364] pci 0000:00:1d.7: System wakeup disabled by ACPI
- [ 0.147406] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
- [ 0.147479] pci 0000:00:1e.0: System wakeup disabled by ACPI
- [ 0.147525] pci 0000:00:1f.0: [8086:3a1a] type 00 class 0x060100
- [ 0.147687] pci 0000:00:1f.2: [8086:3a02] type 00 class 0x010601
- [ 0.147703] pci 0000:00:1f.2: reg 0x10: [io 0x1250-0x1257]
- [ 0.147710] pci 0000:00:1f.2: reg 0x14: [io 0x1268-0x126b]
- [ 0.147717] pci 0000:00:1f.2: reg 0x18: [io 0x1258-0x125f]
- [ 0.147724] pci 0000:00:1f.2: reg 0x1c: [io 0x126c-0x126f]
- [ 0.147731] pci 0000:00:1f.2: reg 0x20: [io 0x11e0-0x11ff]
- [ 0.147738] pci 0000:00:1f.2: reg 0x24: [mem 0xf0526000-0xf05267ff]
- [ 0.147779] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.147938] pci 0000:20:00.0: [14f1:8852] type 00 class 0x040000
- [ 0.147969] pci 0000:20:00.0: reg 0x10: [mem 0xf0600000-0xf07fffff 64bit]
- [ 0.148142] pci 0000:20:00.0: supports D1 D2
- [ 0.148144] pci 0000:20:00.0: PME# supported from D0 D1 D2 D3hot
- [ 0.148207] pci 0000:20:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
- [ 0.148217] pci 0000:00:1c.0: PCI bridge to [bus 20]
- [ 0.148222] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf07fffff]
- [ 0.148296] pci 0000:00:1c.1: PCI bridge to [bus 30]
- [ 0.148424] pci 0000:00:1e.0: PCI bridge to [bus 10] (subtractive decode)
- [ 0.148433] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfebfffff] (subtractive decode)
- [ 0.148435] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
- [ 0.148437] pci 0000:00:1e.0: bridge window [io 0x1000-0x2fff] (subtractive decode)
- [ 0.148438] pci 0000:00:1e.0: bridge window [io 0x3000-0x6fff] (subtractive decode)
- [ 0.148440] pci 0000:00:1e.0: bridge window [io 0x7000-0xafff] (subtractive decode)
- [ 0.148444] pci 0000:00:1e.0: bridge window [io 0xb000-0xffff] (subtractive decode)
- [ 0.148446] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- [ 0.148448] pci 0000:00:1e.0: bridge window [mem 0x7f000000-0xf3ffffff] (subtractive decode)
- [ 0.148449] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
- [ 0.148861] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
- [ 0.148911] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 14 15)
- [ 0.148959] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
- [ 0.149007] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15)
- [ 0.149055] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15)
- [ 0.149104] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 14 15)
- [ 0.149152] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 14 15)
- [ 0.149200] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
- [ 0.149333] ACPI: Enabled 1 GPEs in block 00 to 3F
- [ 0.149410] vgaarb: setting as boot device: PCI:0000:00:02.0
- [ 0.149410] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.149410] vgaarb: loaded
- [ 0.149410] vgaarb: bridge control possible 0000:00:02.0
- [ 0.149410] SCSI subsystem initialized
- [ 0.149410] libata version 3.00 loaded.
- [ 0.149410] ACPI: bus type USB registered
- [ 0.149410] usbcore: registered new interface driver usbfs
- [ 0.149410] usbcore: registered new interface driver hub
- [ 0.149410] usbcore: registered new device driver usb
- [ 0.149410] PCI: Using ACPI for IRQ routing
- [ 0.149410] PCI: pci_cache_line_size set to 64 bytes
- [ 0.149410] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
- [ 0.149410] e820: reserve RAM buffer [mem 0x7c9a1740-0x7fffffff]
- [ 0.149410] NetLabel: Initializing
- [ 0.149410] NetLabel: domain hash size = 128
- [ 0.149410] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.149410] NetLabel: unlabeled traffic allowed by default
- [ 0.149410] HPET: 8 timers in total, 4 timers will be used for per-cpu timer
- [ 0.149410] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 0, 0
- [ 0.149410] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
- [ 0.152016] hpet: hpet2 irq 24 for MSI
- [ 0.152027] hpet: hpet3 irq 25 for MSI
- [ 0.152035] Switched to clocksource hpet
- [ 0.159400] AppArmor: AppArmor Filesystem Enabled
- [ 0.159446] pnp: PnP ACPI init
- [ 0.159539] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.159570] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
- [ 0.159604] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
- [ 0.159821] pnp 00:03: [dma 3]
- [ 0.159874] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active)
- [ 0.160100] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
- [ 0.160158] pnp 00:05: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
- [ 0.160349] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.160399] system 00:07: [io 0x04d0-0x04d1] has been reserved
- [ 0.160402] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.160454] system 00:08: [io 0x0400-0x041f] has been reserved
- [ 0.160456] system 00:08: [io 0x0420-0x043f] has been reserved
- [ 0.160458] system 00:08: [io 0x0440-0x045f] has been reserved
- [ 0.160463] system 00:08: [io 0x0460-0x047f] has been reserved
- [ 0.160465] system 00:08: [io 0x0800-0x087f] has been reserved
- [ 0.160467] system 00:08: [io 0x0880-0x08ff] has been reserved
- [ 0.160469] system 00:08: [io 0xf800-0xf81f] has been reserved
- [ 0.160471] system 00:08: [io 0xf820-0xf83f] has been reserved
- [ 0.160473] system 00:08: [io 0xf840-0xf85f] has been reserved
- [ 0.160475] system 00:08: [io 0xf860-0xf87f] has been reserved
- [ 0.160477] system 00:08: [io 0xfa00-0xfa3f] has been reserved
- [ 0.160479] system 00:08: [io 0xfc00-0xfc7f] has been reserved
- [ 0.160481] system 00:08: [io 0xfc80-0xfcff] has been reserved
- [ 0.160483] system 00:08: [io 0xfe00-0xfe7f] has been reserved
- [ 0.160485] system 00:08: [io 0xfe80-0xfeff] has been reserved
- [ 0.160488] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.164099] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
- [ 0.164104] system 00:09: [mem 0x00100000-0x7effffff] could not be reserved
- [ 0.164108] system 00:09: [mem 0x000e4000-0x000fffff] could not be reserved
- [ 0.164112] system 00:09: [mem 0xfec01000-0xfecfffff] has been reserved
- [ 0.164116] system 00:09: [mem 0xfed00400-0xfed3ffff] has been reserved
- [ 0.164119] system 00:09: [mem 0xfed45000-0xffffffff] has been reserved
- [ 0.164123] system 00:09: [mem 0xf4000000-0xf7ffffff] has been reserved
- [ 0.164127] system 00:09: [mem 0x000ce600-0x000e3fff] has been reserved
- [ 0.164132] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.164151] pnp: PnP ACPI: found 10 devices
- [ 0.171154] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 20] add_size 1000
- [ 0.171157] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 20] add_size 200000
- [ 0.171164] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 30] add_size 1000
- [ 0.171166] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 30] add_size 200000
- [ 0.171169] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 30] add_size 200000
- [ 0.171179] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
- [ 0.171181] pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
- [ 0.171184] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
- [ 0.171186] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
- [ 0.171188] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
- [ 0.171195] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8000000-0xf81fffff 64bit pref]
- [ 0.171197] pci 0000:00:1c.1: BAR 14: assigned [mem 0xf8200000-0xf83fffff]
- [ 0.171201] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf8400000-0xf85fffff 64bit pref]
- [ 0.171204] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
- [ 0.171206] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
- [ 0.171209] pci 0000:00:1c.0: PCI bridge to [bus 20]
- [ 0.171212] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
- [ 0.171216] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf07fffff]
- [ 0.171219] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf81fffff 64bit pref]
- [ 0.171224] pci 0000:00:1c.1: PCI bridge to [bus 30]
- [ 0.171227] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
- [ 0.171231] pci 0000:00:1c.1: bridge window [mem 0xf8200000-0xf83fffff]
- [ 0.171234] pci 0000:00:1c.1: bridge window [mem 0xf8400000-0xf85fffff 64bit pref]
- [ 0.171239] pci 0000:00:1e.0: PCI bridge to [bus 10]
- [ 0.171249] pci_bus 0000:00: resource 4 [mem 0xf8000000-0xfebfffff]
- [ 0.171251] pci_bus 0000:00: resource 5 [io 0x0000-0x0cf7]
- [ 0.171252] pci_bus 0000:00: resource 6 [io 0x1000-0x2fff]
- [ 0.171254] pci_bus 0000:00: resource 7 [io 0x3000-0x6fff]
- [ 0.171256] pci_bus 0000:00: resource 8 [io 0x7000-0xafff]
- [ 0.171258] pci_bus 0000:00: resource 9 [io 0xb000-0xffff]
- [ 0.171259] pci_bus 0000:00: resource 10 [mem 0x000a0000-0x000bffff]
- [ 0.171261] pci_bus 0000:00: resource 11 [mem 0x7f000000-0xf3ffffff]
- [ 0.171263] pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed44fff]
- [ 0.171265] pci_bus 0000:20: resource 0 [io 0x2000-0x2fff]
- [ 0.171267] pci_bus 0000:20: resource 1 [mem 0xf0600000-0xf07fffff]
- [ 0.171269] pci_bus 0000:20: resource 2 [mem 0xf8000000-0xf81fffff 64bit pref]
- [ 0.171271] pci_bus 0000:30: resource 0 [io 0x3000-0x3fff]
- [ 0.171272] pci_bus 0000:30: resource 1 [mem 0xf8200000-0xf83fffff]
- [ 0.171274] pci_bus 0000:30: resource 2 [mem 0xf8400000-0xf85fffff 64bit pref]
- [ 0.171276] pci_bus 0000:10: resource 4 [mem 0xf8000000-0xfebfffff]
- [ 0.171278] pci_bus 0000:10: resource 5 [io 0x0000-0x0cf7]
- [ 0.171280] pci_bus 0000:10: resource 6 [io 0x1000-0x2fff]
- [ 0.171281] pci_bus 0000:10: resource 7 [io 0x3000-0x6fff]
- [ 0.171283] pci_bus 0000:10: resource 8 [io 0x7000-0xafff]
- [ 0.171285] pci_bus 0000:10: resource 9 [io 0xb000-0xffff]
- [ 0.171287] pci_bus 0000:10: resource 10 [mem 0x000a0000-0x000bffff]
- [ 0.171289] pci_bus 0000:10: resource 11 [mem 0x7f000000-0xf3ffffff]
- [ 0.171290] pci_bus 0000:10: resource 12 [mem 0xfed40000-0xfed44fff]
- [ 0.171319] NET: Registered protocol family 2
- [ 0.171505] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.171565] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
- [ 0.171647] TCP: Hash tables configured (established 16384 bind 16384)
- [ 0.171685] TCP: reno registered
- [ 0.171691] UDP hash table entries: 1024 (order: 3, 32768 bytes)
- [ 0.171705] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
- [ 0.171760] NET: Registered protocol family 1
- [ 0.171776] pci 0000:00:02.0: Video device with shadowed ROM
- [ 0.173240] PCI: CLS 64 bytes, default 64
- [ 0.173304] Trying to unpack rootfs image as initramfs...
- [ 0.474013] Freeing initrd memory: 18528K (ffff880035bc0000 - ffff880036dd8000)
- [ 0.474299] microcode: CPU0 sig=0x1067a, pf=0x1, revision=0xa07
- [ 0.474304] microcode: CPU1 sig=0x1067a, pf=0x1, revision=0xa07
- [ 0.474392] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 0.474421] Scanning for low memory corruption every 60 seconds
- [ 0.474740] futex hash table entries: 1024 (order: 4, 65536 bytes)
- [ 0.474777] Initialise system trusted keyring
- [ 0.474800] audit: initializing netlink subsys (disabled)
- [ 0.474823] audit: type=2000 audit(1441999376.472:1): initialized
- [ 0.475152] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.477020] zpool: loaded
- [ 0.477023] zbud: loaded
- [ 0.477191] VFS: Disk quotas dquot_6.5.2
- [ 0.477232] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.477765] fuse init (API version 7.23)
- [ 0.477861] msgmni has been set to 3633
- [ 0.477926] Key type big_key registered
- [ 0.478278] Key type asymmetric registered
- [ 0.478282] Asymmetric key parser 'x509' registered
- [ 0.478323] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- [ 0.478357] io scheduler noop registered
- [ 0.478360] io scheduler deadline registered (default)
- [ 0.478397] io scheduler cfq registered
- [ 0.478625] pcieport 0000:00:1c.0: irq 28 for MSI/MSI-X
- [ 0.478786] pcieport 0000:00:1c.1: irq 29 for MSI/MSI-X
- [ 0.478870] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.478887] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 0.478943] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
- [ 0.478945] vesafb: scrolling: redraw
- [ 0.478946] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
- [ 0.478965] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004400000, using 5120k, total 5120k
- [ 0.518773] Console: switching to colour frame buffer device 160x64
- [ 0.558489] fb0: VESA VGA frame buffer device
- [ 0.558516] intel_idle: does not run on family 6 model 23
- [ 0.558602] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
- [ 0.558606] ACPI: Power Button [PBTN]
- [ 0.558649] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- [ 0.558652] ACPI: Power Button [PWRF]
- [ 0.558739] Monitor-Mwait will be used to enter C-1 state
- [ 0.558744] Monitor-Mwait will be used to enter C-2 state
- [ 0.558747] Monitor-Mwait will be used to enter C-3 state
- [ 0.558750] tsc: Marking TSC unstable due to TSC halts in idle
- [ 0.558762] ACPI: acpi_idle registered with cpuidle
- [ 0.559014] GHES: HEST is not enabled!
- [ 0.559110] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
- [ 0.579455] serial 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
- [ 0.601246] serial 0000:00:03.3: ttyS4 at I/O 0x1248 (irq = 17, base_baud = 115200) is a 16550A
- [ 0.601506] Linux agpgart interface v0.103
- [ 0.601580] agpgart-intel 0000:00:00.0: Intel Q45/Q43 Chipset
- [ 0.601594] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
- [ 0.602028] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
- [ 0.602163] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
- [ 0.602952] tpm_tis 00:05: 1.2 TPM (device-id 0xB, rev-id 16)
- [ 0.852102] tpm_tis 00:05: TPM is disabled/deactivated (0x7)
- [ 0.853702] brd: module loaded
- [ 0.854485] loop: module loaded
- [ 0.855168] scsi host0: ata_generic
- [ 0.855321] scsi host1: ata_generic
- [ 0.855368] ata1: PATA max UDMA/100 cmd 0x1238 ctl 0x1260 bmdma 0x1220 irq 18
- [ 0.855369] ata2: PATA max UDMA/100 cmd 0x1240 ctl 0x1264 bmdma 0x1228 irq 18
- [ 0.855449] libphy: Fixed MDIO Bus: probed
- [ 0.855452] tun: Universal TUN/TAP device driver, 1.6
- [ 0.855453] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 0.855508] PPP generic driver version 2.4.2
- [ 0.855574] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.855580] ehci-pci: EHCI PCI platform driver
- [ 0.855709] ehci-pci 0000:00:1a.7: EHCI Host Controller
- [ 0.855716] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
- [ 0.855728] ehci-pci 0000:00:1a.7: debug port 1
- [ 0.859626] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
- [ 0.859640] ehci-pci 0000:00:1a.7: irq 22, io mem 0xf0526800
- [ 0.868023] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
- [ 0.868084] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.868087] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.868091] usb usb1: Product: EHCI Host Controller
- [ 0.868094] usb usb1: Manufacturer: Linux 3.18.0-031800-generic ehci_hcd
- [ 0.868097] usb usb1: SerialNumber: 0000:00:1a.7
- [ 0.868262] hub 1-0:1.0: USB hub found
- [ 0.868269] hub 1-0:1.0: 6 ports detected
- [ 0.868517] ehci-pci 0000:00:1d.7: EHCI Host Controller
- [ 0.868522] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
- [ 0.868533] ehci-pci 0000:00:1d.7: debug port 1
- [ 0.872440] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
- [ 0.872452] ehci-pci 0000:00:1d.7: irq 20, io mem 0xf0526c00
- [ 0.884081] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- [ 0.884261] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.884264] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.884266] usb usb2: Product: EHCI Host Controller
- [ 0.884267] usb usb2: Manufacturer: Linux 3.18.0-031800-generic ehci_hcd
- [ 0.884269] usb usb2: SerialNumber: 0000:00:1d.7
- [ 0.884387] hub 2-0:1.0: USB hub found
- [ 0.884401] hub 2-0:1.0: 6 ports detected
- [ 0.884597] ehci-platform: EHCI generic platform driver
- [ 0.884611] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.884615] ohci-pci: OHCI PCI platform driver
- [ 0.884629] ohci-platform: OHCI generic platform driver
- [ 0.884637] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.884757] uhci_hcd 0000:00:1a.0: UHCI Host Controller
- [ 0.884762] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
- [ 0.884768] uhci_hcd 0000:00:1a.0: detected 2 ports
- [ 0.884786] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001120
- [ 0.884866] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.884869] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.884870] usb usb3: Product: UHCI Host Controller
- [ 0.884872] usb usb3: Manufacturer: Linux 3.18.0-031800-generic uhci_hcd
- [ 0.884874] usb usb3: SerialNumber: 0000:00:1a.0
- [ 0.884988] hub 3-0:1.0: USB hub found
- [ 0.884999] hub 3-0:1.0: 2 ports detected
- [ 0.885206] uhci_hcd 0000:00:1a.1: UHCI Host Controller
- [ 0.885211] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
- [ 0.885218] uhci_hcd 0000:00:1a.1: detected 2 ports
- [ 0.885244] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001140
- [ 0.885328] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.885330] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.885332] usb usb4: Product: UHCI Host Controller
- [ 0.885333] usb usb4: Manufacturer: Linux 3.18.0-031800-generic uhci_hcd
- [ 0.885335] usb usb4: SerialNumber: 0000:00:1a.1
- [ 0.885441] hub 4-0:1.0: USB hub found
- [ 0.885455] hub 4-0:1.0: 2 ports detected
- [ 0.885661] uhci_hcd 0000:00:1a.2: UHCI Host Controller
- [ 0.885668] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
- [ 0.885674] uhci_hcd 0000:00:1a.2: detected 2 ports
- [ 0.885691] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00001160
- [ 0.885775] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.885777] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.885779] usb usb5: Product: UHCI Host Controller
- [ 0.885781] usb usb5: Manufacturer: Linux 3.18.0-031800-generic uhci_hcd
- [ 0.885783] usb usb5: SerialNumber: 0000:00:1a.2
- [ 0.885897] hub 5-0:1.0: USB hub found
- [ 0.885907] hub 5-0:1.0: 2 ports detected
- [ 0.886109] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [ 0.886115] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
- [ 0.886121] uhci_hcd 0000:00:1d.0: detected 2 ports
- [ 0.886137] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001180
- [ 0.886223] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.886226] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.886227] usb usb6: Product: UHCI Host Controller
- [ 0.886229] usb usb6: Manufacturer: Linux 3.18.0-031800-generic uhci_hcd
- [ 0.886231] usb usb6: SerialNumber: 0000:00:1d.0
- [ 0.886333] hub 6-0:1.0: USB hub found
- [ 0.886339] hub 6-0:1.0: 2 ports detected
- [ 0.886517] uhci_hcd 0000:00:1d.1: UHCI Host Controller
- [ 0.886523] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
- [ 0.886529] uhci_hcd 0000:00:1d.1: detected 2 ports
- [ 0.886545] uhci_hcd 0000:00:1d.1: irq 21, io base 0x000011a0
- [ 0.886584] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.886586] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.886588] usb usb7: Product: UHCI Host Controller
- [ 0.886590] usb usb7: Manufacturer: Linux 3.18.0-031800-generic uhci_hcd
- [ 0.886592] usb usb7: SerialNumber: 0000:00:1d.1
- [ 0.886691] hub 7-0:1.0: USB hub found
- [ 0.886700] hub 7-0:1.0: 2 ports detected
- [ 0.886878] uhci_hcd 0000:00:1d.2: UHCI Host Controller
- [ 0.886883] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
- [ 0.886889] uhci_hcd 0000:00:1d.2: detected 2 ports
- [ 0.886905] uhci_hcd 0000:00:1d.2: irq 22, io base 0x000011c0
- [ 0.886945] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.886947] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.886949] usb usb8: Product: UHCI Host Controller
- [ 0.886951] usb usb8: Manufacturer: Linux 3.18.0-031800-generic uhci_hcd
- [ 0.886953] usb usb8: SerialNumber: 0000:00:1d.2
- [ 0.887050] hub 8-0:1.0: USB hub found
- [ 0.887057] hub 8-0:1.0: 2 ports detected
- [ 0.887190] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
- [ 0.890076] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.890080] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 0.890225] mousedev: PS/2 mouse device common for all mice
- [ 0.890384] rtc_cmos 00:00: RTC can wake from S4
- [ 0.890510] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
- [ 0.890533] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- [ 0.890621] device-mapper: uevent: version 1.0.3
- [ 0.890694] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
- [ 0.890711] ledtrig-cpu: registered to indicate activity on CPUs
- [ 0.890811] TCP: cubic registered
- [ 0.890932] NET: Registered protocol family 10
- [ 0.891173] NET: Registered protocol family 17
- [ 0.891185] Key type dns_resolver registered
- [ 0.891505] Loading compiled-in X.509 certificates
- [ 0.892389] Loaded X.509 cert 'Magrathea: Glacier signing key: 8f968a5835659d60e54716914793fc205eb59ec0'
- [ 0.892407] registered taskstats version 1
- [ 0.894196] Key type trusted registered
- [ 0.895653] Key type encrypted registered
- [ 0.897271] AppArmor: AppArmor sha1 policy hashing enabled
- [ 0.944105] tpm_tis 00:05: A TPM error (7) occurred attempting to read a pcr value
- [ 0.944476] ima: No TPM chip found, activating TPM-bypass!
- [ 0.944505] evm: HMAC attrs: 0x1
- [ 0.944830] Magic number: 15:682:394
- [ 0.944949] rtc_cmos 00:00: setting system clock to 2015-09-11 19:22:57 UTC (1441999377)
- [ 1.004275] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 1.004276] EDD information not available.
- [ 1.004335] PM: Hibernation image not present or could not be loaded.
- [ 1.183033] usb 1-5: new high-speed USB device number 2 using ehci-pci
- [ 1.184390] Freeing unused kernel memory: 1392K (ffffffff81d23000 - ffffffff81e7f000)
- [ 1.184393] Write protecting the kernel read-only data: 12288k
- [ 1.185237] Freeing unused kernel memory: 276K (ffff8800017bb000 - ffff880001800000)
- [ 1.186029] Freeing unused kernel memory: 304K (ffff880001bb4000 - ffff880001c00000)
- [ 1.196579] systemd-udevd[110]: starting version 204
- [ 1.215554] pps_core: LinuxPPS API ver. 1 registered
- [ 1.215558] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 1.217515] PTP clock support registered
- [ 1.221502] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
- [ 1.221505] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
- [ 1.221713] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
- [ 1.221730] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
- [ 1.312935] usb 1-5: New USB device found, idVendor=4971, idProduct=1011
- [ 1.312941] usb 1-5: New USB device strings: Mfr=10, Product=11, SerialNumber=3
- [ 1.312944] usb 1-5: Product: Touro Desk
- [ 1.312947] usb 1-5: Manufacturer: HitachiGST
- [ 1.312950] usb 1-5: SerialNumber: E3011340172B
- [ 1.416450] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:23:24:0e:93:41
- [ 1.416453] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
- [ 1.416486] e1000e 0000:00:19.0 eth0: MAC: 8, PHY: 8, PBA No: FFFFFF-0FF
- [ 1.416514] ahci 0000:00:1f.2: version 3.0
- [ 1.416676] ahci 0000:00:1f.2: irq 31 for MSI/MSI-X
- [ 1.416732] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0xf impl SATA mode
- [ 1.416735] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
- [ 1.417733] scsi host2: ahci
- [ 1.417862] scsi host3: ahci
- [ 1.418021] scsi host4: ahci
- [ 1.418112] scsi host5: ahci
- [ 1.418204] scsi host6: ahci
- [ 1.418298] scsi host7: ahci
- [ 1.418352] ata3: SATA max UDMA/133 abar m2048@0xf0526000 port 0xf0526100 irq 31
- [ 1.418354] ata4: SATA max UDMA/133 abar m2048@0xf0526000 port 0xf0526180 irq 31
- [ 1.418356] ata5: SATA max UDMA/133 abar m2048@0xf0526000 port 0xf0526200 irq 31
- [ 1.418358] ata6: SATA max UDMA/133 abar m2048@0xf0526000 port 0xf0526280 irq 31
- [ 1.418360] ata7: DUMMY
- [ 1.418361] ata8: DUMMY
- [ 1.528079] usb 7-1: new low-speed USB device number 2 using uhci_hcd
- [ 1.703041] usb-storage 1-5:1.0: USB Mass Storage device detected
- [ 1.703140] scsi host8: usb-storage 1-5:1.0
- [ 1.703221] usbcore: registered new interface driver usb-storage
- [ 1.704585] usbcore: registered new interface driver uas
- [ 1.719131] usb 7-1: New USB device found, idVendor=04d9, idProduct=2517
- [ 1.719136] usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.736076] ata6: SATA link down (SStatus 0 SControl 300)
- [ 1.740076] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.740096] ata5: SATA link down (SStatus 0 SControl 300)
- [ 1.740120] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 1.740600] ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
- [ 1.740604] ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
- [ 1.740662] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
- [ 1.740817] ata3.00: ACPI cmd e3/00:00:00:00:00:a0 (IDLE) succeeded
- [ 1.740822] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
- [ 1.740825] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
- [ 1.740829] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
- [ 1.741396] ata3.00: ATA-7: WDC WD800JD-75MSA3, 10.01E04, max UDMA/133
- [ 1.741400] ata3.00: 156250000 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 1.741949] ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
- [ 1.741954] ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
- [ 1.742025] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
- [ 1.742157] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
- [ 1.742161] ata4.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
- [ 1.742165] ata4.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
- [ 1.742169] ata4.00: ATAPI: hp DVD-ROM TS-H353C, H430, max UDMA/100
- [ 1.742178] ata3.00: ACPI cmd e3/00:00:00:00:00:a0 (IDLE) succeeded
- [ 1.742182] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
- [ 1.742186] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
- [ 1.742189] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
- [ 1.742744] ata3.00: configured for UDMA/133
- [ 1.742885] scsi 2:0:0:0: Direct-Access ATA WDC WD800JD-75MS 1E04 PQ: 0 ANSI: 5
- [ 1.743141] sd 2:0:0:0: Attached scsi generic sg0 type 0
- [ 1.743143] sd 2:0:0:0: [sda] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB)
- [ 1.743194] sd 2:0:0:0: [sda] Write Protect is off
- [ 1.743197] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.743218] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.745367] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
- [ 1.745373] ata4.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
- [ 1.745376] ata4.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
- [ 1.745382] ata4.00: configured for UDMA/100
- [ 1.748429] scsi 3:0:0:0: CD-ROM hp DVD-ROM TS-H353C H430 PQ: 0 ANSI: 5
- [ 1.761186] sr 3:0:0:0: [sr0] scsi3-mmc drive: 16x/40x cd/rw xa/form2 cdda tray
- [ 1.761190] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 1.761373] sr 3:0:0:0: Attached scsi CD-ROM sr0
- [ 1.761434] sr 3:0:0:0: Attached scsi generic sg1 type 5
- [ 1.778381] hidraw: raw HID events driver (C) Jiri Kosina
- [ 1.787428] sda: sda1 sda2 < sda5 >
- [ 1.787852] sd 2:0:0:0: [sda] Attached SCSI disk
- [ 1.812048] usb 5-2: new full-speed USB device number 2 using uhci_hcd
- [ 1.885557] usbcore: registered new interface driver usbhid
- [ 1.885559] usbhid: USB HID core driver
- [ 1.887160] input: HID 04d9:2517 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/0003:04D9:2517.0001/input/input5
- [ 1.887313] hid-generic 0003:04D9:2517.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 04d9:2517] on usb-0000:00:1d.1-1/input0
- [ 1.887764] input: HID 04d9:2517 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.1/0003:04D9:2517.0002/input/input6
- [ 1.887861] hid-generic 0003:04D9:2517.0002: input,hidraw1: USB HID v1.10 Mouse [HID 04d9:2517] on usb-0000:00:1d.1-1/input1
- [ 1.981118] usb 5-2: New USB device found, idVendor=0609, idProduct=031d
- [ 1.981125] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 1.981129] usb 5-2: Product: eHome Infrared Transceiver
- [ 1.981132] usb 5-2: Manufacturer: SMK
- [ 1.981134] usb 5-2: SerialNumber: SM002rbj
- [ 2.439435] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
- [ 3.156810] random: nonblocking pool is initialized
- [ 4.699981] scsi 8:0:0:0: Direct-Access Hitachi HDS723020BLA642 PQ: 0 ANSI: 2 CCS
- [ 4.700248] sd 8:0:0:0: Attached scsi generic sg2 type 0
- [ 5.315923] init: ureadahead main process (184) terminated with status 5
- [ 6.918533] Adding 2039804k swap on /dev/sda5. Priority:-1 extents:1 across:2039804k FS
- [ 8.636479] systemd-udevd[293]: starting version 204
- [ 9.992586] sd 8:0:0:0: [sdb] 3907028992 512-byte logical blocks: (2.00 TB/1.81 TiB)
- [ 9.993576] sd 8:0:0:0: [sdb] Write Protect is off
- [ 9.993581] sd 8:0:0:0: [sdb] Mode Sense: 28 00 00 00
- [ 9.994569] sd 8:0:0:0: [sdb] No Caching mode page found
- [ 9.994841] sd 8:0:0:0: [sdb] Assuming drive cache: write through
- [ 10.012377] sdb: sdb1
- [ 10.015329] sd 8:0:0:0: [sdb] Attached SCSI disk
- [ 12.070768] lp: driver loaded but no devices found
- [ 12.207550] ppdev: user-space parallel port driver
- [ 12.270521] parport_pc 00:03: reported by Plug and Play ACPI
- [ 12.270589] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
- [ 12.368223] lp0: using parport0 (interrupt-driven).
- [ 13.869874] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
- [ 16.963655] wmi: Mapper loaded
- [ 16.974459] e1000e 0000:00:19.0 eth2: renamed from eth0
- [ 16.984129] systemd-udevd[400]: renamed network interface eth0 to eth2
- [ 17.119277] mei_me 0000:00:03.0: irq 32 for MSI/MSI-X
- [ 17.582889] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 18.455140] [drm] Initialized drm 1.1.0 20060810
- [ 19.054868] kvm: disabled by bios
- [ 19.060911] kvm: disabled by bios
- [ 19.568400] input: HP WMI hotkeys as /devices/virtual/input/input7
- [ 19.573940] gpio_ich: GPIO from 440 to 511 on gpio_ich
- [ 20.342403] media: Linux media interface: v0.10
- [ 20.449642] [drm] Memory usable by graphics device = 2048M
- [ 20.449649] checking generic (e0000000 500000) vs hw (e0000000 10000000)
- [ 20.449651] fb: switching to inteldrmfb from VESA VGA
- [ 20.449710] Console: switching to colour dummy device 80x25
- [ 20.449797] [drm] Replacing VGA console driver
- [ 20.450473] [drm] ACPI BIOS requests an excessive sleep of 3548118767 ms, using 1500 ms instead
- [ 20.450518] i915 0000:00:02.0: irq 33 for MSI/MSI-X
- [ 20.450526] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 20.450527] [drm] Driver supports precise vblank timestamp query.
- [ 20.450591] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
- [ 20.453070] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20140926/video-1198)
- [ 20.453077] ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no)
- [ 20.453173] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
- [ 20.453247] [drm] Initialized i915 1.6.0 20140905 for 0000:00:02.0 on minor 0
- [ 20.518628] Linux video capture interface: v2.00
- [ 20.565182] fbcon: inteldrmfb (fb0) is primary device
- [ 20.588802] Console: switching to colour frame buffer device 160x64
- [ 20.591503] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
- [ 20.591504] i915 0000:00:02.0: registered panic notifier
- [ 20.910467] snd_hda_intel 0000:00:1b.0: irq 34 for MSI/MSI-X
- [ 21.084037] Registered IR keymap rc-rc6-mce
- [ 21.084192] input: Media Center Ed. eHome Infrared Remote Transceiver (0609:031d) as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/rc/rc0/input9
- [ 21.084258] rc0: Media Center Ed. eHome Infrared Remote Transceiver (0609:031d) as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/rc/rc0
- [ 21.271750] IR NEC protocol handler initialized
- [ 21.296030] mceusb 5-2:1.0: Registered SMK eHome Infrared Transceiver with mce emulator interface version 1
- [ 21.296035] mceusb 5-2:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x1 active)
- [ 21.296070] usbcore: registered new interface driver mceusb
- [ 21.300522] IR RC5(x/sz) protocol handler initialized
- [ 21.300523] IR RC6 protocol handler initialized
- [ 21.309259] IR JVC protocol handler initialized
- [ 21.312856] IR Sony protocol handler initialized
- [ 21.313736] IR SANYO protocol handler initialized
- [ 21.314045] IR Sharp protocol handler initialized
- [ 21.315026] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input10
- [ 21.315178] IR MCE Keyboard/mouse protocol handler initialized
- [ 21.315541] lirc_dev: IR Remote Control driver registered, major 246
- [ 21.316934] IR XMP protocol handler initialized
- [ 21.349642] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
- [ 21.349647] sound hdaudioC0D0: speaker_outs=1 (0x15/0x0/0x0/0x0/0x0)
- [ 21.349649] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
- [ 21.349651] sound hdaudioC0D0: mono: mono_out=0x0
- [ 21.349652] sound hdaudioC0D0: inputs:
- [ 21.349654] sound hdaudioC0D0: Mic=0x19
- [ 21.349656] sound hdaudioC0D0: Line=0x18
- [ 21.357338] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
- [ 21.357418] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
- [ 21.357490] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
- [ 21.357559] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
- [ 21.451871] rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
- [ 21.451875] IR LIRC bridge handler initialized
- [ 22.595574] cx23885 driver version 0.0.4 loaded
- [ 22.595702] CORE cx23885[0]: subsystem: 0070:7911, board: Hauppauge WinTV-HVR1250 [card=3,autodetected]
- [ 22.722366] tveeprom 7-0050: Hauppauge model 79661, rev D2D9, serial# 6684256
- [ 22.722370] tveeprom 7-0050: MAC address is 00:0d:fe:65:fe:60
- [ 22.722372] tveeprom 7-0050: tuner model is Microtune MT2131 (idx 139, type 4)
- [ 22.722373] tveeprom 7-0050: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88)
- [ 22.722375] tveeprom 7-0050: audio processor is CX23885 (idx 39)
- [ 22.722377] tveeprom 7-0050: decoder processor is CX23885B (idx 41)
- [ 22.722378] tveeprom 7-0050: has no radio
- [ 22.722379] cx23885[0]: warning: unknown hauppauge model #79661
- [ 22.722381] cx23885[0]: hauppauge eeprom: model=79661
- [ 23.071390] cx25840 9-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0])
- [ 23.501623] audit: type=1400 audit(1441999400.053:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=418 comm="apparmor_parser"
- [ 23.501630] audit: type=1400 audit(1441999400.053:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=418 comm="apparmor_parser"
- [ 23.501633] audit: type=1400 audit(1441999400.053:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=418 comm="apparmor_parser"
- [ 23.501640] audit: type=1400 audit(1441999400.053:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=416 comm="apparmor_parser"
- [ 23.501647] audit: type=1400 audit(1441999400.053:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=416 comm="apparmor_parser"
- [ 23.501651] audit: type=1400 audit(1441999400.053:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=416 comm="apparmor_parser"
- [ 23.501988] audit: type=1400 audit(1441999400.053:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=418 comm="apparmor_parser"
- [ 23.501992] audit: type=1400 audit(1441999400.053:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=418 comm="apparmor_parser"
- [ 23.502004] audit: type=1400 audit(1441999400.053:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=416 comm="apparmor_parser"
- [ 23.502009] audit: type=1400 audit(1441999400.053:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=416 comm="apparmor_parser"
- [ 24.585066] cx25840 9-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)
- [ 24.860936] cx23885[0]: registered device video0 [v4l2]
- [ 24.860995] cx23885[0]: registered device vbi0
- [ 24.861147] cx23885[0]: registered ALSA audio device
- [ 24.861149] cx23885_dvb_register() allocating 1 frontend(s)
- [ 24.861152] cx23885[0]: cx23885 based dvb card
- [ 25.806812] MT2131: successfully identified at address 0x61
- [ 25.806820] DVB: registering new adapter (cx23885[0])
- [ 25.806825] cx23885 0000:20:00.0: DVB: registering adapter 0 frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)...
- [ 25.807233] cx23885_dev_checkrevision() Hardware revision = 0xb0
- [ 25.807239] cx23885[0]/0: found at 0000:20:00.0, rev: 2, irq: 16, latency: 0, mmio: 0xf0600000
- [ 25.984905] init: failsafe main process (575) killed by TERM signal
- [ 29.930200] audit_printk_skb: 6 callbacks suppressed
- [ 29.930204] audit: type=1400 audit(1441999406.481:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=709 comm="apparmor_parser"
- [ 29.930209] audit: type=1400 audit(1441999406.481:15): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=709 comm="apparmor_parser"
- [ 29.930590] audit: type=1400 audit(1441999406.481:16): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=709 comm="apparmor_parser"
- [ 30.298880] init: cups main process (725) killed by HUP signal
- [ 30.298891] init: cups main process ended, respawning
- [ 30.448489] Bluetooth: Core ver 2.19
- [ 30.448524] NET: Registered protocol family 31
- [ 30.448526] Bluetooth: HCI device and connection manager initialized
- [ 30.448538] Bluetooth: HCI socket layer initialized
- [ 30.448541] Bluetooth: L2CAP socket layer initialized
- [ 30.448549] Bluetooth: SCO socket layer initialized
- [ 30.864196] Bluetooth: RFCOMM TTY layer initialized
- [ 30.864210] Bluetooth: RFCOMM socket layer initialized
- [ 30.864215] Bluetooth: RFCOMM ver 1.11
- [ 31.192625] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 31.192628] Bluetooth: BNEP filters: protocol multicast
- [ 31.192638] Bluetooth: BNEP socket layer initialized
- [ 37.722264] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
- [ 37.824067] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
- [ 37.824169] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
- [ 39.332878] e1000e: eth2 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
- [ 39.332988] e1000e 0000:00:19.0 eth2: 10/100 speed: disabling TSO
- [ 39.333017] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
- [ 41.325863] audit: type=1400 audit(1441999417.877:17): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=887 comm="apparmor_parser"
- [ 41.325871] audit: type=1400 audit(1441999417.877:18): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=887 comm="apparmor_parser"
- [ 41.325875] audit: type=1400 audit(1441999417.877:19): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=887 comm="apparmor_parser"
- [ 41.326233] audit: type=1400 audit(1441999417.877:20): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=887 comm="apparmor_parser"
- [ 41.326237] audit: type=1400 audit(1441999417.877:21): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=887 comm="apparmor_parser"
- [ 41.326413] audit: type=1400 audit(1441999417.877:22): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=887 comm="apparmor_parser"
- [ 41.901674] audit: type=1400 audit(1441999418.453:23): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=886 comm="apparmor_parser"
- [ 41.901680] audit: type=1400 audit(1441999418.453:24): apparmor="STATUS" operation="profile_load" name="chromium" pid=886 comm="apparmor_parser"
- [ 41.901872] audit: type=1400 audit(1441999418.453:25): apparmor="STATUS" operation="profile_replace" name="chromium" pid=886 comm="apparmor_parser"
- [ 42.226719] audit: type=1400 audit(1441999418.777:26): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=891 comm="apparmor_parser"
- [ 56.755689] cx23885 0000:20:00.0: DVB: adapter 0 frontend 0 frequency 0 out of range (54000000..858000000)
- [ 60.664903] audit_printk_skb: 123 callbacks suppressed
- [ 60.664907] audit: type=1400 audit(1441999437.216:68): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1385 comm="apparmor_parser"
- [ 60.664913] audit: type=1400 audit(1441999437.216:69): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1385 comm="apparmor_parser"
- [ 60.665283] audit: type=1400 audit(1441999437.216:70): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1385 comm="apparmor_parser"
- [ 80.714318] init: plymouth-upstart-bridge main process ended, respawning
- [ 105.430342] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
- [ 2910.717831] perf interrupt took too long (2509 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
- [17601.887617] sd 8:0:0:0: [sdb]
- [17601.887623] Sense Key : No Sense [current] [descriptor]
- [17601.887628] Descriptor sense data with sense descriptors (in hex):
- [17601.887630] 72 00 00 1d 00 00 00 0e 09 0c 00 e0 00 00 00 00
- [17601.887642] 00 00 00 00 e0 d0
- [17601.887648] sd 8:0:0:0: [sdb]
- [17601.887651] Add. Sense: ATA pass through information available
- [17905.916515] systemd-hostnamed[2858]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
- [18236.700148] systemd-hostnamed[2887]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
- [18755.033116] systemd-hostnamed[2935]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
- [23890.328035] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
- [123448.459234] init: anacron main process (4555) killed by TERM signal
- [123448.792322] PM: Syncing filesystems ... done.
- [123449.097233] PM: Preparing system for mem sleep
- [123449.252685] Freezing user space processes ... (elapsed 0.268 seconds) done.
- [123449.520887] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
- [123449.522061] PM: Entering mem sleep
- [123449.522082] Suspending console(s) (use no_console_suspend to debug)
- [123449.522597] mceusb 5-2:1.0: suspend
- [123449.522618] sd 2:0:0:0: [sda] Synchronizing SCSI cache
- [123449.526073] sd 2:0:0:0: [sda] Stopping disk
- [123449.632118] serial 00:04: disabled
- [123449.632152] serial 00:04: System wakeup disabled by ACPI
- [123449.632200] parport_pc 00:03: disabled
- [123449.632356] e1000e: EEE TX LPI TIMER: 00000000
- [123449.956057] PM: suspend of devices complete after 433.607 msecs
- [123449.972116] PM: late suspend of devices complete after 16.053 msecs
- [123449.972514] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
- [123449.972523] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
- [123449.972547] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
- [123449.972570] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
- [123449.972662] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
- [123449.972704] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
- [123449.972714] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
- [123449.972748] e1000e 0000:00:19.0: System wakeup enabled by ACPI
- [123449.972803] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
- [123449.988052] PM: noirq suspend of devices complete after 15.933 msecs
- [123449.988400] ACPI: Preparing to enter system sleep state S3
- [123449.990665] PM: Saving platform NVS memory
- [123449.990683] Disabling non-boot CPUs ...
- [123449.990884] Broke affinity for irq 25
- [123449.991896] smpboot: CPU 1 is now offline
- [123449.992153] ACPI: Low-level resume complete
- [123449.992153] PM: Restoring platform NVS memory
- [123449.992153] Enabling non-boot CPUs ...
- [123449.992153] x86: Booting SMP configuration:
- [123449.992153] smpboot: Booting Node 0 Processor 1 APIC 0x1
- [123450.003962] hpet: hpet3 irq 25 for MSI
- [123450.003969] CPU1 is up
- [123450.005123] ACPI: Waking up from system sleep state S3
- [123450.005339] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
- [123450.005368] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
- [123450.005389] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
- [123450.005511] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
- [123450.005514] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
- [123450.005537] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
- [123450.020078] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
- [123450.020194] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
- [123450.020415] PM: noirq resume of devices complete after 15.189 msecs
- [123450.020642] PM: early resume of devices complete after 0.199 msecs
- [123450.024046] mei_me 0000:00:03.0: irq 30 for MSI/MSI-X
- [123450.024233] e1000e 0000:00:19.0: System wakeup disabled by ACPI
- [123450.026151] e1000e 0000:00:19.0 eth2: MAC Wakeup cause - Magic Packet
- [123450.026271] usb usb3: root hub lost power or was reset
- [123450.026384] usb usb4: root hub lost power or was reset
- [123450.026493] usb usb5: root hub lost power or was reset
- [123450.026690] snd_hda_intel 0000:00:1b.0: irq 32 for MSI/MSI-X
- [123450.026829] usb usb6: root hub lost power or was reset
- [123450.026936] usb usb7: root hub lost power or was reset
- [123450.027042] usb usb8: root hub lost power or was reset
- [123450.027290] rtc_cmos 00:00: System wakeup disabled by ACPI
- [123450.027655] parport_pc 00:03: activated
- [123450.027857] serial 00:04: activated
- [123450.028547] sd 2:0:0:0: [sda] Starting disk
- [123450.098032] e1000e 0000:00:19.0: irq 34 for MSI/MSI-X
- [123450.352038] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [123450.352055] ata5: SATA link down (SStatus 0 SControl 300)
- [123450.352068] ata6: SATA link down (SStatus 0 SControl 300)
- [123450.354087] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
- [123450.354090] ata4.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
- [123450.354093] ata4.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
- [123450.356054] usb 5-2: reset full-speed USB device number 2 using uhci_hcd
- [123450.374084] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
- [123450.374087] ata4.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
- [123450.374090] ata4.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
- [123450.374094] ata4.00: configured for UDMA/100
- [123450.432059] tpm_tis 00:05: TPM is disabled/deactivated (0x7)
- [123450.496061] usb 7-1: reset low-speed USB device number 2 using uhci_hcd
- [123450.716074] mceusb 5-2:1.0: resume
- [123450.943895] PM: resume of devices complete after 923.250 msecs
- [123450.944197] PM: Finishing wakeup.
- [123450.944198] Restarting tasks ... done.
- [123451.848870] e1000e: eth2 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
- [123451.848980] e1000e 0000:00:19.0 eth2: 10/100 speed: disabling TSO
- [123454.272081] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [123454.280132] ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
- [123454.280138] ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
- [123454.280209] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
- [123454.280362] ata3.00: ACPI cmd e3/00:00:00:00:00:a0 (IDLE) succeeded
- [123454.280366] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
- [123454.280370] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
- [123454.280374] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
- [123454.281447] ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
- [123454.281452] ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
- [123454.281511] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
- [123454.281666] ata3.00: ACPI cmd e3/00:00:00:00:00:a0 (IDLE) succeeded
- [123454.281671] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
- [123454.281674] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
- [123454.281678] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
- [123454.282229] ata3.00: configured for UDMA/133
- [123461.808023] ------------[ cut here ]------------
- [123461.808037] WARNING: CPU: 1 PID: 0 at /home/apw/COD/linux/net/sched/sch_generic.c:303 dev_watchdog+0x247/0x250()
- [123461.808040] NETDEV WATCHDOG: eth2 (e1000e): transmit queue 0 timed out
- [123461.808042] Modules linked in: bnep rfcomm bluetooth mt2131 s5h1409 tuner cx25840 cx23885 altera_ci tda18271 altera_stapl videobuf2_dvb tveeprom cx2341x ir_lirc_codec videobuf2_dma_sg snd_hda_codec_realtek ir_xmp_decoder lirc_dev ir_mce_kbd_decoder ir_sharp_decoder ir_sanyo_decoder ir_sony_decoder ir_jvc_decoder ir_rc6_decoder ir_rc5_decoder dvb_core ir_nec_decoder snd_hda_codec_generic videobuf2_memops rc_rc6_mce snd_hda_intel videobuf2_core snd_hda_controller v4l2_common snd_hda_codec videodev mceusb i915 snd_hwdep media rc_core snd_pcm joydev snd_seq_midi snd_seq_midi_event coretemp gpio_ich hp_wmi snd_rawmidi sparse_keymap snd_seq kvm snd_seq_device drm_kms_helper snd_timer drm snd soundcore serio_raw i2c_algo_bit shpchp lpc_ich 8250_fintek mei_me wmi mei video tpm_infineon mac_hid parport_pc ppdev lp parport hid_generic usbhid hid uas usb_storage psmouse ahci libahci e1000e ptp pata_acpi pps_core
- [123461.808126] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.18.0-031800-generic #201412071935
- [123461.808128] Hardware name: Hewlett-Packard HP Compaq 6000 Pro SFF PC/3048h, BIOS 786G2 v01.09 08/25/2009
- [123461.808131] 000000000000012f ffff88007c683d08 ffffffff817a5a29 0000000000000007
- [123461.808135] ffff88007c683d58 ffff88007c683d48 ffffffff81074b0c ffff88007c68d880
- [123461.808139] ffff880036b44000 ffff880036b443a0 ffff880036a97600 0000000000000001
- [123461.808143] Call Trace:
- [123461.808146] <IRQ> [<ffffffff817a5a29>] dump_stack+0x46/0x58
- [123461.808157] [<ffffffff81074b0c>] warn_slowpath_common+0x8c/0xc0
- [123461.808161] [<ffffffff81074bf6>] warn_slowpath_fmt+0x46/0x50
- [123461.808168] [<ffffffff816b82b7>] dev_watchdog+0x247/0x250
- [123461.808173] [<ffffffff8108bd70>] ? __queue_work+0x3c0/0x3c0
- [123461.808178] [<ffffffff816b8070>] ? dequeue_skb+0x110/0x110
- [123461.808182] [<ffffffff810db5d5>] call_timer_fn+0x45/0x160
- [123461.808187] [<ffffffff810de955>] ? hrtimer_interrupt+0x145/0x260
- [123461.808191] [<ffffffff810dcd48>] run_timer_softirq+0x2c8/0x340
- [123461.808195] [<ffffffff816b8070>] ? dequeue_skb+0x110/0x110
- [123461.808199] [<ffffffff8107884f>] __do_softirq+0xef/0x330
- [123461.808203] [<ffffffff81078d9e>] irq_exit+0x11e/0x140
- [123461.808207] [<ffffffff817b6047>] do_IRQ+0x67/0x110
- [123461.808211] [<ffffffff817b3eed>] common_interrupt+0x6d/0x6d
- [123461.808213] <EOI> [<ffffffff8162b751>] ? cpuidle_enter_state+0x71/0x190
- [123461.808222] [<ffffffff8162b73f>] ? cpuidle_enter_state+0x5f/0x190
- [123461.808226] [<ffffffff8162b937>] cpuidle_enter+0x17/0x20
- [123461.808230] [<ffffffff810b5062>] cpuidle_idle_call+0x102/0x1c0
- [123461.808234] [<ffffffff810b5305>] cpu_idle_loop+0x1e5/0x200
- [123461.808238] [<ffffffff810b537b>] cpu_startup_entry+0x5b/0x60
- [123461.808243] [<ffffffff810496bd>] start_secondary+0xcd/0xd0
- [123461.808247] ---[ end trace e58f896b23bb9648 ]---
- [123461.808268] e1000e 0000:00:19.0 eth2: Reset adapter unexpectedly
- [123463.816906] e1000e: eth2 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
- [123463.817016] e1000e 0000:00:19.0 eth2: 10/100 speed: disabling TSO
- [125479.296953] audit: type=1400 audit(1442159405.849:71): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=5280 comm="apparmor_parser"
- [125479.296960] audit: type=1400 audit(1442159405.849:72): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=5280 comm="apparmor_parser"
- [125479.297330] audit: type=1400 audit(1442159405.849:73): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=5280 comm="apparmor_parser"
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement