daily pastebin goal
66%
SHARE
TWEET

boot error msg on Arch SError: { CommWake DevExch }

a guest Feb 8th, 2017 131 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [    0.000000] Linux version 4.9.7-1-ARCH (builduser@tobias) (gcc version 6.3.1 20170109 (GCC) ) #1 SMP PREEMPT Wed Feb 1 19:33:40 CET 2017
  2. [    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=b89067e7-88a8-4b11-b22a-ef45fef0b9fd rw cryptdevice=/dev/disk/by-uuid/fab56a3f-0224-4830-a216-a7ff33cc89c5:cryptAntergos quiet resume=UUID=1faf6dd3-8afe-4707-b0f6-00d35832d024
  3. [    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
  4. [    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
  5. [    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
  6. [    0.000000] x86/fpu: Using 'eager' FPU context switches.
  7. [    0.000000] e820: BIOS-provided physical RAM map:
  8. [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
  9. [    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
  10. [    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
  11. [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
  12. [    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
  13. [    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
  14. [    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
  15. [    0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000caabefff] usable
  16. [    0.000000] BIOS-e820: [mem 0x00000000caabf000-0x00000000caebefff] reserved
  17. [    0.000000] BIOS-e820: [mem 0x00000000caebf000-0x00000000cafbefff] ACPI NVS
  18. [    0.000000] BIOS-e820: [mem 0x00000000cafbf000-0x00000000caffefff] ACPI data
  19. [    0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable
  20. [    0.000000] BIOS-e820: [mem 0x00000000cb000000-0x00000000cf9fffff] reserved
  21. [    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
  22. [    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
  23. [    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
  24. [    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
  25. [    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
  26. [    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
  27. [    0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
  28. [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012f5fffff] usable
  29. [    0.000000] NX (Execute Disable) protection: active
  30. [    0.000000] SMBIOS 2.7 present.
  31. [    0.000000] DMI: LENOVO 20150/Product Name, BIOS 5ECN42WW(V4.01) 03/14/2013
  32. [    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
  33. [    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
  34. [    0.000000] e820: last_pfn = 0x12f600 max_arch_pfn = 0x400000000
  35. [    0.000000] MTRR default type: uncachable
  36. [    0.000000] MTRR fixed ranges enabled:
  37. [    0.000000]   00000-9FFFF write-back
  38. [    0.000000]   A0000-BFFFF uncachable
  39. [    0.000000]   C0000-E7FFF write-protect
  40. [    0.000000]   E8000-EFFFF write-combining
  41. [    0.000000]   F0000-FFFFF write-protect
  42. [    0.000000] MTRR variable ranges enabled:
  43. [    0.000000]   0 base 000000000 mask F80000000 write-back
  44. [    0.000000]   1 base 080000000 mask FC0000000 write-back
  45. [    0.000000]   2 base 0C0000000 mask FF0000000 write-back
  46. [    0.000000]   3 base 0CB000000 mask FFF000000 uncachable
  47. [    0.000000]   4 base 0CC000000 mask FFC000000 uncachable
  48. [    0.000000]   5 base 0FFC00000 mask FFFC00000 write-protect
  49. [    0.000000]   6 base 100000000 mask FE0000000 write-back
  50. [    0.000000]   7 base 120000000 mask FF0000000 write-back
  51. [    0.000000]   8 base 12F600000 mask FFFE00000 uncachable
  52. [    0.000000]   9 base 12F800000 mask FFF800000 uncachable
  53. [    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
  54. [    0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000
  55. [    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
  56. [    0.000000] Scanning 1 areas for low memory corruption
  57. [    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
  58. [    0.000000] BRK [0x01d57000, 0x01d57fff] PGTABLE
  59. [    0.000000] BRK [0x01d58000, 0x01d58fff] PGTABLE
  60. [    0.000000] BRK [0x01d59000, 0x01d59fff] PGTABLE
  61. [    0.000000] BRK [0x01d5a000, 0x01d5afff] PGTABLE
  62. [    0.000000] BRK [0x01d5b000, 0x01d5bfff] PGTABLE
  63. [    0.000000] BRK [0x01d5c000, 0x01d5cfff] PGTABLE
  64. [    0.000000] RAMDISK: [mem 0x37005000-0x377f9fff]
  65. [    0.000000] ACPI: Early table checksum verification disabled
  66. [    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
  67. [    0.000000] ACPI: XSDT 0x00000000CAFFE210 00008C (v01 LENOVO CB-01    00000001      01000013)
  68. [    0.000000] ACPI: FACP 0x00000000CAFFB000 0000F4 (v04 LENOVO CB-01    00000001 ACPI 00040000)
  69. [    0.000000] ACPI: DSDT 0x00000000CAFEE000 0099A4 (v01 LENOVO CB-01    00000001 ACPI 00040000)
  70. [    0.000000] ACPI: FACS 0x00000000CAFBB000 000040
  71. [    0.000000] ACPI: FACS 0x00000000CAFBB000 000040
  72. [    0.000000] ACPI: UEFI 0x00000000CAFFD000 000236 (v01 LENOVO CB-01    00000001 ACPI 00040000)
  73. [    0.000000] ACPI: ASF! 0x00000000CAFFC000 0000A5 (v32 LENOVO CB-01    00000001 ACPI 00040000)
  74. [    0.000000] ACPI: HPET 0x00000000CAFFA000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
  75. [    0.000000] ACPI: APIC 0x00000000CAFF9000 00008C (v02 LENOVO CB-01    00000001 ACPI 00040000)
  76. [    0.000000] ACPI: MCFG 0x00000000CAFF8000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
  77. [    0.000000] ACPI: SLIC 0x00000000CAFED000 000176 (v01 LENOVO CB-01    00000001 ACPI 00040000)
  78. [    0.000000] ACPI: SSDT 0x00000000CAFEC000 0006FE (v01 LENOVO CB-01    00001000 ACPI 00040000)
  79. [    0.000000] ACPI: BOOT 0x00000000CAFEA000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
  80. [    0.000000] ACPI: ASPT 0x00000000CAFE5000 000034 (v07 LENOVO CB-01    00000001 ACPI 00040000)
  81. [    0.000000] ACPI: FPDT 0x00000000CAFE3000 000044 (v01 LENOVO CB-01    00000001 ACPI 00040000)
  82. [    0.000000] ACPI: SSDT 0x00000000CAFE2000 000758 (v01 LENOVO CB-01    00003000 ACPI 00040000)
  83. [    0.000000] ACPI: SSDT 0x00000000CAFE1000 000A92 (v01 LENOVO CB-01    00003000 ACPI 00040000)
  84. [    0.000000] ACPI: Local APIC address 0xfee00000
  85. [    0.000000] No NUMA configuration found
  86. [    0.000000] Faking a node at [mem 0x0000000000000000-0x000000012f5fffff]
  87. [    0.000000] NODE_DATA(0) allocated [mem 0x12f5f7000-0x12f5fbfff]
  88. [    0.000000] Zone ranges:
  89. [    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  90. [    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  91. [    0.000000]   Normal   [mem 0x0000000100000000-0x000000012f5fffff]
  92. [    0.000000]   Device   empty
  93. [    0.000000] Movable zone start for each node
  94. [    0.000000] Early memory node ranges
  95. [    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
  96. [    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
  97. [    0.000000]   node   0: [mem 0x0000000020200000-0x0000000040003fff]
  98. [    0.000000]   node   0: [mem 0x0000000040005000-0x00000000caabefff]
  99. [    0.000000]   node   0: [mem 0x00000000cafff000-0x00000000caffffff]
  100. [    0.000000]   node   0: [mem 0x0000000100000000-0x000000012f5fffff]
  101. [    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000012f5fffff]
  102. [    0.000000] On node 0 totalpages: 1023579
  103. [    0.000000]   DMA zone: 64 pages used for memmap
  104. [    0.000000]   DMA zone: 21 pages reserved
  105. [    0.000000]   DMA zone: 3996 pages, LIFO batch:0
  106. [    0.000000]   DMA32 zone: 12899 pages used for memmap
  107. [    0.000000]   DMA32 zone: 825535 pages, LIFO batch:31
  108. [    0.000000]   Normal zone: 3032 pages used for memmap
  109. [    0.000000]   Normal zone: 194048 pages, LIFO batch:31
  110. [    0.000000] Reserving Intel graphics memory at 0x00000000cba00000-0x00000000cf9fffff
  111. [    0.000000] ACPI: PM-Timer IO Port: 0x408
  112. [    0.000000] ACPI: Local APIC address 0xfee00000
  113. [    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
  114. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  115. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  116. [    0.000000] ACPI: IRQ0 used by override.
  117. [    0.000000] ACPI: IRQ9 used by override.
  118. [    0.000000] Using ACPI (MADT) for SMP configuration information
  119. [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
  120. [    0.000000] smpboot: Allowing 8 CPUs, 6 hotplug CPUs
  121. [    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
  122. [    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
  123. [    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
  124. [    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
  125. [    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
  126. [    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
  127. [    0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
  128. [    0.000000] PM: Registered nosave memory: [mem 0xcaabf000-0xcaebefff]
  129. [    0.000000] PM: Registered nosave memory: [mem 0xcaebf000-0xcafbefff]
  130. [    0.000000] PM: Registered nosave memory: [mem 0xcafbf000-0xcaffefff]
  131. [    0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcf9fffff]
  132. [    0.000000] PM: Registered nosave memory: [mem 0xcfa00000-0xefffffff]
  133. [    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
  134. [    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfeafffff]
  135. [    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
  136. [    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
  137. [    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
  138. [    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
  139. [    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
  140. [    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
  141. [    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
  142. [    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
  143. [    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
  144. [    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
  145. [    0.000000] PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
  146. [    0.000000] e820: [mem 0xcfa00000-0xefffffff] available for PCI devices
  147. [    0.000000] Booting paravirtualized kernel on bare hardware
  148. [    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
  149. [    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
  150. [    0.000000] percpu: Embedded 35 pages/cpu @ffff88012f200000 s103512 r8192 d31656 u262144
  151. [    0.000000] pcpu-alloc: s103512 r8192 d31656 u262144 alloc=1*2097152
  152. [    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
  153. [    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1007563
  154. [    0.000000] Policy zone: Normal
  155. [    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=b89067e7-88a8-4b11-b22a-ef45fef0b9fd rw cryptdevice=/dev/disk/by-uuid/fab56a3f-0224-4830-a216-a7ff33cc89c5:cryptAntergos quiet resume=UUID=1faf6dd3-8afe-4707-b0f6-00d35832d024
  156. [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  157. [    0.000000] Calgary: detecting Calgary via BIOS EBDA area
  158. [    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
  159. [    0.000000] Memory: 3939692K/4094316K available (6205K kernel code, 1071K rwdata, 1944K rodata, 1280K init, 1032K bss, 154624K reserved, 0K cma-reserved)
  160. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  161. [    0.000000] Preemptible hierarchical RCU implementation.
  162. [    0.000000]  Build-time adjustment of leaf fanout to 64.
  163. [    0.000000]  RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
  164. [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
  165. [    0.000000] NR_IRQS:8448 nr_irqs:488 16
  166. [    0.000000] Console: colour dummy device 80x25
  167. [    0.000000] console [tty0] enabled
  168. [    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
  169. [    0.000000] hpet clockevent registered
  170. [    0.000000] tsc: Fast TSC calibration using PIT
  171. [    0.000000] tsc: Detected 1795.756 MHz processor
  172. [    0.000036] Calibrating delay loop (skipped), value calculated using timer frequency.. 3592.15 BogoMIPS (lpj=5985853)
  173. [    0.000039] pid_max: default: 32768 minimum: 301
  174. [    0.000051] ACPI: Core revision 20160831
  175. [    0.008743] ACPI: 4 ACPI AML tables successfully acquired and loaded
  176. [    0.008780] Security Framework initialized
  177. [    0.008781] Yama: becoming mindful.
  178. [    0.009047] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
  179. [    0.010416] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
  180. [    0.011036] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
  181. [    0.011041] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
  182. [    0.011358] CPU: Physical Processor ID: 0
  183. [    0.011359] CPU: Processor Core ID: 0
  184. [    0.011365] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
  185. [    0.011365] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
  186. [    0.011369] mce: CPU supports 7 MCE banks
  187. [    0.011378] CPU0: Thermal monitoring enabled (TM1)
  188. [    0.011391] process: using mwait in idle threads
  189. [    0.011395] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
  190. [    0.011396] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
  191. [    0.011958] Freeing SMP alternatives memory: 24K (ffffffff81c4d000 - ffffffff81c53000)
  192. [    0.026967] ftrace: allocating 24613 entries in 97 pages
  193. [    0.046419] smpboot: Max logical packages: 4
  194. [    0.046495] x2apic: IRQ remapping doesn't support X2APIC mode
  195. [    0.046955] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  196. [    0.079964] TSC deadline timer enabled
  197. [    0.079968] smpboot: CPU0: Intel(R) Celeron(R) CPU 1000M @ 1.80GHz (family: 0x6, model: 0x3a, stepping: 0x9)
  198. [    0.079973] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
  199. [    0.079999] ... version:                3
  200. [    0.080000] ... bit width:              48
  201. [    0.080001] ... generic registers:      8
  202. [    0.080002] ... value mask:             0000ffffffffffff
  203. [    0.080002] ... max period:             00007fffffffffff
  204. [    0.080003] ... fixed-purpose events:   3
  205. [    0.080003] ... event mask:             00000007000000ff
  206. [    0.113538] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
  207. [    0.146734] x86: Booting SMP configuration:
  208. [    0.146736] .... node  #0, CPUs:      #1
  209. [    0.232149] x86: Booted up 1 node, 2 CPUs
  210. [    0.232152] smpboot: Total of 2 processors activated (7186.45 BogoMIPS)
  211. [    0.233657] devtmpfs: initialized
  212. [    0.233742] x86/mm: Memory block size: 128MB
  213. [    0.236710] PM: Registering ACPI NVS region [mem 0xcaebf000-0xcafbefff] (1048576 bytes)
  214. [    0.236783] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
  215. [    0.236821] pinctrl core: initialized pinctrl subsystem
  216. [    0.236876] RTC time: 15:52:32, date: 02/08/17
  217. [    0.236975] NET: Registered protocol family 16
  218. [    0.245466] cpuidle: using governor ladder
  219. [    0.258805] cpuidle: using governor menu
  220. [    0.258850] Simple Boot Flag at 0x44 set to 0x1
  221. [    0.258860] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
  222. [    0.258861] ACPI: bus type PCI registered
  223. [    0.258863] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
  224. [    0.258938] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
  225. [    0.258941] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
  226. [    0.258948] PCI: Using configuration type 1 for base access
  227. [    0.259149] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
  228. [    0.259166] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
  229. [    0.272317] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  230. [    0.272563] ACPI: Added _OSI(Module Device)
  231. [    0.272564] ACPI: Added _OSI(Processor Device)
  232. [    0.272565] ACPI: Added _OSI(3.0 _SCP Extensions)
  233. [    0.272566] ACPI: Added _OSI(Processor Aggregator Device)
  234. [    0.272773] ACPI: Executed 1 blocks of module-level executable AML code
  235. [    0.280285] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
  236. [    0.286626] ACPI: Dynamic OEM Table Load:
  237. [    0.286637] ACPI: SSDT 0xFFFF880129DA1000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20100121)
  238. [    0.287052] ACPI: Dynamic OEM Table Load:
  239. [    0.287060] ACPI: SSDT 0xFFFF880129E15000 000303 (v01 PmRef  ApIst    00003000 INTL 20100121)
  240. [    0.287350] ACPI: Dynamic OEM Table Load:
  241. [    0.287356] ACPI: SSDT 0xFFFF880129CEDA00 000119 (v01 PmRef  ApCst    00003000 INTL 20100121)
  242. [    0.287818] ACPI : EC: EC started
  243. [    0.288393] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
  244. [    0.288395] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
  245. [    0.288397] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
  246. [    0.288397] ACPI: Interpreter enabled
  247. [    0.288425] ACPI: (supports S0 S3 S4 S5)
  248. [    0.288426] ACPI: Using IOAPIC for interrupt routing
  249. [    0.288456] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  250. [    0.457351] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
  251. [    0.457357] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
  252. [    0.457503] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
  253. [    0.458043] PCI host bridge to bus 0000:00
  254. [    0.458045] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
  255. [    0.458047] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
  256. [    0.458048] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
  257. [    0.458050] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff window]
  258. [    0.458052] pci_bus 0000:00: root bus resource [bus 00-3e]
  259. [    0.458060] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
  260. [    0.458174] pci 0000:00:02.0: [8086:0156] type 00 class 0x030000
  261. [    0.458186] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
  262. [    0.458193] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
  263. [    0.458198] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
  264. [    0.458344] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
  265. [    0.458368] pci 0000:00:14.0: reg 0x10: [mem 0xe0600000-0xe060ffff 64bit]
  266. [    0.458449] pci 0000:00:14.0: PME# supported from D3hot D3cold
  267. [    0.458502] pci 0000:00:14.0: System wakeup disabled by ACPI
  268. [    0.458552] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
  269. [    0.458576] pci 0000:00:16.0: reg 0x10: [mem 0xe0614000-0xe061400f 64bit]
  270. [    0.458659] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
  271. [    0.458766] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
  272. [    0.459022] pci 0000:00:1a.0: reg 0x10: [mem 0xe0619000-0xe06193ff]
  273. [    0.460426] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
  274. [    0.460507] pci 0000:00:1a.0: System wakeup disabled by ACPI
  275. [    0.460558] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
  276. [    0.460578] pci 0000:00:1b.0: reg 0x10: [mem 0xe0610000-0xe0613fff 64bit]
  277. [    0.460662] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
  278. [    0.460719] pci 0000:00:1b.0: System wakeup disabled by ACPI
  279. [    0.460767] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
  280. [    0.460855] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
  281. [    0.460956] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
  282. [    0.461042] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
  283. [    0.461154] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
  284. [    0.461390] pci 0000:00:1d.0: reg 0x10: [mem 0xe0618000-0xe06183ff]
  285. [    0.462798] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
  286. [    0.462877] pci 0000:00:1d.0: System wakeup disabled by ACPI
  287. [    0.462927] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
  288. [    0.463125] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
  289. [    0.463143] pci 0000:00:1f.2: reg 0x10: [io  0x3088-0x308f]
  290. [    0.463152] pci 0000:00:1f.2: reg 0x14: [io  0x3094-0x3097]
  291. [    0.463161] pci 0000:00:1f.2: reg 0x18: [io  0x3080-0x3087]
  292. [    0.463170] pci 0000:00:1f.2: reg 0x1c: [io  0x3090-0x3093]
  293. [    0.463178] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
  294. [    0.463188] pci 0000:00:1f.2: reg 0x24: [mem 0xe0617000-0xe06177ff]
  295. [    0.463235] pci 0000:00:1f.2: PME# supported from D3hot
  296. [    0.463323] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
  297. [    0.463341] pci 0000:00:1f.3: reg 0x10: [mem 0xe0615000-0xe06150ff 64bit]
  298. [    0.463365] pci 0000:00:1f.3: reg 0x20: [io  0x3040-0x305f]
  299. [    0.463605] pci 0000:01:00.0: [1969:1090] type 00 class 0x020000
  300. [    0.463715] pci 0000:01:00.0: reg 0x10: [mem 0xe0500000-0xe053ffff 64bit]
  301. [    0.463765] pci 0000:01:00.0: reg 0x18: [io  0x2000-0x207f]
  302. [    0.464301] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  303. [    0.464494] pci 0000:01:00.0: System wakeup disabled by ACPI
  304. [    0.475816] pci 0000:00:1c.0: PCI bridge to [bus 01]
  305. [    0.475820] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
  306. [    0.475825] pci 0000:00:1c.0:   bridge window [mem 0xe0500000-0xe05fffff]
  307. [    0.475951] pci 0000:02:00.0: [14e4:4727] type 00 class 0x028000
  308. [    0.475986] pci 0000:02:00.0: reg 0x10: [mem 0xe0400000-0xe0403fff 64bit]
  309. [    0.476165] pci 0000:02:00.0: supports D1 D2
  310. [    0.476166] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
  311. [    0.476223] pci 0000:02:00.0: System wakeup disabled by ACPI
  312. [    0.485825] pci 0000:00:1c.1: PCI bridge to [bus 02]
  313. [    0.485832] pci 0000:00:1c.1:   bridge window [mem 0xe0400000-0xe04fffff]
  314. [    0.566140] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
  315. [    0.566202] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
  316. [    0.566261] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
  317. [    0.566323] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
  318. [    0.566382] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
  319. [    0.566442] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
  320. [    0.566500] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
  321. [    0.566559] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
  322. [    0.566687] ACPI: Enabled 5 GPEs in block 00 to 3F
  323. [    0.566751] ACPI : EC: event unblocked
  324. [    0.566771] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
  325. [    0.566773] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
  326. [    0.566965] vgaarb: setting as boot device: PCI:0000:00:02.0
  327. [    0.566966] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
  328. [    0.566969] vgaarb: loaded
  329. [    0.566970] vgaarb: bridge control possible 0000:00:02.0
  330. [    0.567063] PCI: Using ACPI for IRQ routing
  331. [    0.568976] PCI: pci_cache_line_size set to 64 bytes
  332. [    0.569070] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
  333. [    0.569072] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
  334. [    0.569073] e820: reserve RAM buffer [mem 0xcaabf000-0xcbffffff]
  335. [    0.569074] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
  336. [    0.569076] e820: reserve RAM buffer [mem 0x12f600000-0x12fffffff]
  337. [    0.569201] NetLabel: Initializing
  338. [    0.569202] NetLabel:  domain hash size = 128
  339. [    0.569202] NetLabel:  protocols = UNLABELED CIPSOv4
  340. [    0.569218] NetLabel:  unlabeled traffic allowed by default
  341. [    0.569284] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
  342. [    0.569291] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
  343. [    0.571317] clocksource: Switched to clocksource hpet
  344. [    0.578418] VFS: Disk quotas dquot_6.6.0
  345. [    0.578442] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  346. [    0.578537] pnp: PnP ACPI init
  347. [    0.578702] system 00:00: [io  0x0680-0x069f] has been reserved
  348. [    0.578704] system 00:00: [io  0x1000-0x100f] has been reserved
  349. [    0.578706] system 00:00: [io  0xffff] has been reserved
  350. [    0.578707] system 00:00: [io  0xffff] has been reserved
  351. [    0.578709] system 00:00: [io  0x0400-0x0453] has been reserved
  352. [    0.578711] system 00:00: [io  0x0458-0x047f] has been reserved
  353. [    0.578712] system 00:00: [io  0x0500-0x057f] has been reserved
  354. [    0.578714] system 00:00: [io  0x164e-0x164f] has been reserved
  355. [    0.578715] system 00:00: [io  0xfd60-0xfd63] has been reserved
  356. [    0.578720] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
  357. [    0.578754] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
  358. [    0.578812] system 00:02: [io  0x0454-0x0457] has been reserved
  359. [    0.578815] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
  360. [    0.578846] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
  361. [    0.578891] pnp 00:04: Plug and Play ACPI device, IDs SYN073b SYN0700 SYN0002 PNP0f13 (active)
  362. [    0.658173] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
  363. [    0.658175] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
  364. [    0.658176] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
  365. [    0.658178] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
  366. [    0.658180] system 00:05: [mem 0xf0000000-0xf3ffffff] has been reserved
  367. [    0.658181] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
  368. [    0.658183] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
  369. [    0.658185] system 00:05: [mem 0xff000000-0xff000fff] has been reserved
  370. [    0.658186] system 00:05: [mem 0xff010000-0xffffffff] could not be reserved
  371. [    0.658188] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
  372. [    0.658190] system 00:05: [mem 0xcfa00000-0xcfa00fff] has been reserved
  373. [    0.658193] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
  374. [    0.658566] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
  375. [    0.658568] system 00:06: [mem 0x40004000-0x40004fff] has been reserved
  376. [    0.658570] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
  377. [    0.658590] pnp: PnP ACPI: found 7 devices
  378. [    0.665220] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
  379. [    0.665250] pci 0000:00:1c.0: PCI bridge to [bus 01]
  380. [    0.665254] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
  381. [    0.665261] pci 0000:00:1c.0:   bridge window [mem 0xe0500000-0xe05fffff]
  382. [    0.665272] pci 0000:00:1c.1: PCI bridge to [bus 02]
  383. [    0.665278] pci 0000:00:1c.1:   bridge window [mem 0xe0400000-0xe04fffff]
  384. [    0.665287] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
  385. [    0.665289] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
  386. [    0.665291] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
  387. [    0.665292] pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xfeafffff window]
  388. [    0.665294] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
  389. [    0.665295] pci_bus 0000:01: resource 1 [mem 0xe0500000-0xe05fffff]
  390. [    0.665297] pci_bus 0000:02: resource 1 [mem 0xe0400000-0xe04fffff]
  391. [    0.665419] NET: Registered protocol family 2
  392. [    0.665599] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
  393. [    0.665678] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
  394. [    0.665768] TCP: Hash tables configured (established 32768 bind 32768)
  395. [    0.665795] UDP hash table entries: 2048 (order: 4, 65536 bytes)
  396. [    0.665811] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
  397. [    0.665871] NET: Registered protocol family 1
  398. [    0.665886] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
  399. [    0.698120] pci 0000:01:00.0: set MSI_INTX_DISABLE_BUG flag
  400. [    0.698161] PCI: CLS 64 bytes, default 64
  401. [    0.698218] Unpacking initramfs...
  402. [    0.865626] Freeing initrd memory: 8148K (ffff880037005000 - ffff8800377fa000)
  403. [    0.865631] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  404. [    0.865633] software IO TLB [mem 0xc6abf000-0xcaabf000] (64MB) mapped at [ffff8800c6abf000-ffff8800caabefff]
  405. [    0.865846] Scanning for low memory corruption every 60 seconds
  406. [    0.866186] futex hash table entries: 2048 (order: 5, 131072 bytes)
  407. [    0.866674] Initialise system trusted keyrings
  408. [    0.866766] workingset: timestamp_bits=40 max_order=20 bucket_order=0
  409. [    0.868640] zbud: loaded
  410. [    0.869132] Key type asymmetric registered
  411. [    0.869171] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  412. [    0.869197] io scheduler noop registered
  413. [    0.869198] io scheduler deadline registered
  414. [    0.869207] io scheduler cfq registered (default)
  415. [    0.869628] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  416. [    0.869634] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  417. [    0.869645] vesafb: mode is 1366x768x32, linelength=5504, pages=0
  418. [    0.869646] vesafb: scrolling: redraw
  419. [    0.869648] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
  420. [    0.869658] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90001000000, using 4160k, total 4160k
  421. [    0.960500] Console: switching to colour frame buffer device 170x48
  422. [    1.050949] fb0: VESA VGA frame buffer device
  423. [    1.050965] intel_idle: MWAIT substates: 0x120
  424. [    1.050966] intel_idle: v0.4.1 model 0x3A
  425. [    1.051036] intel_idle: lapic_timer_reliable_states 0xffffffff
  426. [    1.051158] GHES: HEST is not enabled!
  427. [    1.051244] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  428. [    1.051771] Linux agpgart interface v0.103
  429. [    1.051991] rtc_cmos 00:01: RTC can wake from S4
  430. [    1.052143] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
  431. [    1.052173] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
  432. [    1.052185] intel_pstate: Intel P-state driver initializing
  433. [    1.052304] ledtrig-cpu: registered to indicate activity on CPUs
  434. [    1.052667] NET: Registered protocol family 10
  435. [    1.053035] NET: Registered protocol family 17
  436. [    1.053297] microcode: sig=0x306a9, pf=0x10, revision=0x15
  437. [    1.053382] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
  438. [    1.053631] registered taskstats version 1
  439. [    1.053641] Loading compiled-in X.509 certificates
  440. [    1.053659] zswap: loaded using pool lzo/zbud
  441. [    1.054190]   Magic number: 5:505:891
  442. [    1.054200] event_source msr: hash matches
  443. [    1.054292] rtc_cmos 00:01: setting system clock to 2017-02-08 15:52:33 UTC (1486569153)
  444. [    1.054392] PM: Checking hibernation image partition UUID=1faf6dd3-8afe-4707-b0f6-00d35832d024
  445. [    1.054396] PM: Hibernation image not present or could not be loaded.
  446. [    1.056276] Freeing unused kernel memory: 1280K (ffffffff81b0d000 - ffffffff81c4d000)
  447. [    1.056278] Write protecting the kernel read-only data: 10240k
  448. [    1.057131] Freeing unused kernel memory: 1972K (ffff880001613000 - ffff880001800000)
  449. [    1.057632] Freeing unused kernel memory: 104K (ffff8800019e6000 - ffff880001a00000)
  450. [    1.071061] random: systemd-tmpfile: uninitialized urandom read (16 bytes read)
  451. [    1.071193] random: systemd-tmpfile: uninitialized urandom read (16 bytes read)
  452. [    1.074254] random: systemd-udevd: uninitialized urandom read (16 bytes read)
  453. [    1.074326] random: systemd-udevd: uninitialized urandom read (16 bytes read)
  454. [    1.074344] random: systemd-udevd: uninitialized urandom read (16 bytes read)
  455. [    1.076565] device-mapper: uevent: version 1.0.3
  456. [    1.076585] random: systemd-udevd: uninitialized urandom read (16 bytes read)
  457. [    1.076613] random: systemd-udevd: uninitialized urandom read (16 bytes read)
  458. [    1.076622] random: systemd-udevd: uninitialized urandom read (16 bytes read)
  459. [    1.076683] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
  460. [    1.076935] random: systemd-udevd: uninitialized urandom read (16 bytes read)
  461. [    1.076958] random: systemd-udevd: uninitialized urandom read (16 bytes read)
  462. [    1.129648] ACPI: bus type USB registered
  463. [    1.129676] usbcore: registered new interface driver usbfs
  464. [    1.129687] usbcore: registered new interface driver hub
  465. [    1.129719] usbcore: registered new device driver usb
  466. [    1.131044] xhci_hcd 0000:00:14.0: xHCI Host Controller
  467. [    1.131051] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
  468. [    1.132157] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
  469. [    1.132165] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
  470. [    1.132464] hub 1-0:1.0: USB hub found
  471. [    1.132475] hub 1-0:1.0: 4 ports detected
  472. [    1.132929] xhci_hcd 0000:00:14.0: xHCI Host Controller
  473. [    1.132934] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
  474. [    1.133108] hub 2-0:1.0: USB hub found
  475. [    1.133119] hub 2-0:1.0: 4 ports detected
  476. [    1.135548] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
  477. [    1.145971] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  478. [    1.154121] ehci-pci: EHCI PCI platform driver
  479. [    1.154288] ehci-pci 0000:00:1a.0: EHCI Host Controller
  480. [    1.154298] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
  481. [    1.154313] ehci-pci 0000:00:1a.0: debug port 2
  482. [    1.159743] SCSI subsystem initialized
  483. [    1.161921] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
  484. [    1.161939] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe0619000
  485. [    1.162865] serio: i8042 KBD port at 0x60,0x64 irq 1
  486. [    1.162936] libata version 3.00 loaded.
  487. [    1.163803] serio: i8042 AUX port at 0x60,0x64 irq 12
  488. [    1.174805] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
  489. [    1.175010] hub 3-0:1.0: USB hub found
  490. [    1.175151] hub 3-0:1.0: 2 ports detected
  491. [    1.175604] ehci-pci 0000:00:1d.0: EHCI Host Controller
  492. [    1.175610] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
  493. [    1.175625] ehci-pci 0000:00:1d.0: debug port 2
  494. [    1.179538] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
  495. [    1.179556] ehci-pci 0000:00:1d.0: irq 23, io mem 0xe0618000
  496. [    1.191399] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
  497. [    1.191656] hub 4-0:1.0: USB hub found
  498. [    1.191665] hub 4-0:1.0: 2 ports detected
  499. [    1.191824] ahci 0000:00:1f.2: version 3.0
  500. [    1.192051] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
  501. [    1.202162] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
  502. [    1.202165] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
  503. [    1.203041] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
  504. [    1.212155] scsi host0: ahci
  505. [    1.212304] scsi host1: ahci
  506. [    1.212417] scsi host2: ahci
  507. [    1.212517] scsi host3: ahci
  508. [    1.212611] scsi host4: ahci
  509. [    1.212703] scsi host5: ahci
  510. [    1.212758] ata1: SATA max UDMA/133 abar m2048@0xe0617000 port 0xe0617100 irq 25
  511. [    1.212759] ata2: DUMMY
  512. [    1.212762] ata3: SATA max UDMA/133 abar m2048@0xe0617000 port 0xe0617200 irq 25
  513. [    1.212763] ata4: DUMMY
  514. [    1.212764] ata5: DUMMY
  515. [    1.212765] ata6: DUMMY
  516. [    1.494758] usb 3-1: new high-speed USB device number 2 using ehci-pci
  517. [    1.514758] usb 4-1: new high-speed USB device number 2 using ehci-pci
  518. [    1.528172] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  519. [    1.529114] ata1.00: ATA-8: HITACHI HTS723232A7A364, EC2ZB70R, max UDMA/100
  520. [    1.529117] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
  521. [    1.530153] ata1.00: configured for UDMA/100
  522. [    1.530494] scsi 0:0:0:0: Direct-Access     ATA      HITACHI HTS72323 B70R PQ: 0 ANSI: 5
  523. [    1.632076] hub 3-1:1.0: USB hub found
  524. [    1.632645] hub 3-1:1.0: 6 ports detected
  525. [    1.652087] hub 4-1:1.0: USB hub found
  526. [    1.652153] hub 4-1:1.0: 6 ports detected
  527. [    1.881474] tsc: Refined TSC clocksource calibration: 1795.920 MHz
  528. [    1.881482] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19e31b7216c, max_idle_ns: 440795249889 ns
  529. [    1.911486] usb 3-1.2: new low-speed USB device number 3 using ehci-pci
  530. [    1.931468] usb 4-1.6: new high-speed USB device number 3 using ehci-pci
  531. [    2.013987] hidraw: raw HID events driver (C) Jiri Kosina
  532. [    2.016777] usbcore: registered new interface driver usbhid
  533. [    2.016778] usbhid: USB HID core driver
  534. [    2.084840] usb 3-1.3: new full-speed USB device number 4 using ehci-pci
  535. [    2.261519] usb 3-1.4: new high-speed USB device number 5 using ehci-pci
  536. [    2.362958] usbcore: registered new interface driver rtsx_usb
  537. [    2.371723] random: fast init done
  538. [    2.895003] clocksource: Switched to clocksource tsc
  539. [    3.773869] ata3: SATA link down (SStatus 1 SControl 300)
  540. [    3.774069] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  541. [    3.775466] ata3: irq_stat 0x00000040, connection status changed
  542. [    3.776589] ata3: SError: { CommWake DevExch }
  543. [    3.777426] ata3: hard resetting link
  544. [    3.779095] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
  545. [    3.779159] sd 0:0:0:0: [sda] Write Protect is off
  546. [    3.779162] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  547. [    3.779189] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  548. [    3.839528]  sda: sda1 sda2 sda3 sda4 < sda5 >
  549. [    3.840326] sd 0:0:0:0: [sda] Attached SCSI disk
  550. [    5.985175] ata3: SATA link down (SStatus 1 SControl 300)
  551. [    5.985188] ata3: EH complete
  552. [    5.985319] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  553. [    5.986700] ata3: irq_stat 0x00000040, connection status changed
  554. [    5.987819] ata3: SError: { CommWake DevExch }
  555. [    5.988661] ata3: limiting SATA link speed to 1.5 Gbps
  556. [    5.988663] ata3: hard resetting link
  557. [    8.195368] ata3: SATA link down (SStatus 1 SControl 310)
  558. [    8.195377] ata3: EH complete
  559. [    8.195622] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  560. [    8.197001] ata3: irq_stat 0x00000040, connection status changed
  561. [    8.198120] ata3: SError: { CommWake DevExch }
  562. [    8.198959] ata3: limiting SATA link speed to 1.5 Gbps
  563. [    8.198961] ata3: hard resetting link
  564. [   10.405573] ata3: SATA link down (SStatus 1 SControl 310)
  565. [   10.405583] ata3: EH complete
  566. [   10.405936] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  567. [   10.407316] ata3: irq_stat 0x00000040, connection status changed
  568. [   10.408434] ata3: SError: { CommWake DevExch }
  569. [   10.409273] ata3: limiting SATA link speed to 1.5 Gbps
  570. [   10.409275] ata3: hard resetting link
  571. [   12.615775] ata3: SATA link down (SStatus 1 SControl 310)
  572. [   12.615784] ata3: EH complete
  573. [   12.616246] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  574. [   12.617625] ata3: irq_stat 0x00000040, connection status changed
  575. [   12.618744] ata3: SError: { CommWake DevExch }
  576. [   12.619582] ata3: limiting SATA link speed to 1.5 Gbps
  577. [   12.619584] ata3: hard resetting link
  578. [   14.825978] ata3: SATA link down (SStatus 1 SControl 310)
  579. [   14.825989] ata3: EH complete
  580. [   14.826560] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  581. [   14.827939] ata3: irq_stat 0x00000040, connection status changed
  582. [   14.829057] ata3: SError: { CommWake DevExch }
  583. [   14.829897] ata3: limiting SATA link speed to 1.5 Gbps
  584. [   14.829899] ata3: hard resetting link
  585. [   17.036177] ata3: SATA link down (SStatus 1 SControl 310)
  586. [   17.036186] ata3: EH complete
  587. [   17.036872] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  588. [   17.038250] ata3: irq_stat 0x00000040, connection status changed
  589. [   17.039369] ata3: SError: { CommWake DevExch }
  590. [   17.040209] ata3: limiting SATA link speed to 1.5 Gbps
  591. [   17.040211] ata3: hard resetting link
  592. [   19.246379] ata3: SATA link down (SStatus 1 SControl 310)
  593. [   19.246388] ata3: EH complete
  594. [   19.247180] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  595. [   19.248570] ata3: irq_stat 0x00000040, connection status changed
  596. [   19.249705] ata3: SError: { CommWake DevExch }
  597. [   19.250544] ata3: limiting SATA link speed to 1.5 Gbps
  598. [   19.250546] ata3: hard resetting link
  599. [   20.041716] random: crng init done
  600. [   21.456574] ata3: SATA link down (SStatus 1 SControl 310)
  601. [   21.456582] ata3: EH complete
  602. [   21.457401] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  603. [   21.458349] ata3: irq_stat 0x00000040, connection status changed
  604. [   21.459118] ata3: SError: { CommWake DevExch }
  605. [   21.459690] ata3: limiting SATA link speed to 1.5 Gbps
  606. [   21.459692] ata3: hard resetting link
  607. [   22.592283] NET: Registered protocol family 38
  608. [   23.216653] PM: Starting manual resume from disk
  609. [   23.216657] PM: Hibernation image partition 8:5 present
  610. [   23.216658] PM: Looking for hibernation image.
  611. [   23.244272] PM: Image not found (code -22)
  612. [   23.244283] PM: Hibernation image not present or could not be loaded.
  613. [   23.466963] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
  614. [   23.666797] ata3: SATA link down (SStatus 1 SControl 310)
  615. [   23.666810] ata3: EH complete
  616. [   23.667568] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  617. [   23.668695] ata3: irq_stat 0x00000040, connection status changed
  618. [   23.669606] ata3: SError: { CommWake DevExch }
  619. [   23.670292] ata3: limiting SATA link speed to 1.5 Gbps
  620. [   23.670295] ata3: hard resetting link
  621. [   24.492150] ip_tables: (C) 2000-2006 Netfilter Core Team
  622. [   24.544142] systemd[1]: systemd 232 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
  623. [   24.544326] systemd[1]: Detected architecture x86-64.
  624. [   24.563514] systemd[1]: Set hostname to <Durachok>.
  625. [   25.638290] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  626. [   25.638406] systemd[1]: Listening on Journal Socket.
  627. [   25.638478] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  628. [   25.638502] systemd[1]: Reached target Remote File Systems.
  629. [   25.639034] systemd[1]: Created slice User and Session Slice.
  630. [   25.639092] systemd[1]: Listening on Journal Socket (/dev/log).
  631. [   25.639159] systemd[1]: Listening on udev Kernel Socket.
  632. [   25.854192] sd 0:0:0:0: Attached scsi generic sg0 type 0
  633. [   25.880331] ata3: SATA link down (SStatus 1 SControl 310)
  634. [   25.880343] ata3: EH complete
  635. [   25.880878] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  636. [   25.881942] ata3: irq_stat 0x00000040, connection status changed
  637. [   25.882801] ata3: SError: { CommWake DevExch }
  638. [   25.883440] ata3: limiting SATA link speed to 1.5 Gbps
  639. [   25.883442] ata3: hard resetting link
  640. [   26.019030] EXT4-fs (dm-0): re-mounted. Opts: data=ordered
  641. [   26.120431] vboxdrv: loading out-of-tree module taints kernel.
  642. [   26.124397] vboxdrv: Found 2 processor cores
  643. [   26.143877] vboxdrv: TSC mode is Invariant, tentative frequency 1795919195 Hz
  644. [   26.143879] vboxdrv: Successfully loaded version 5.1.14 (interface 0x00280000)
  645. [   26.164224] VBoxPciLinuxInit
  646. [   26.284985] vboxpci: IOMMU not found (not registered)
  647. [   26.340387] VBoxNetAdp: Successfully started.
  648. [   26.381183] VBoxNetFlt: Successfully started.
  649. [   28.074402] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  650. [   28.087591] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input2
  651. [   28.087596] ACPI: Power Button [PWRB]
  652. [   28.088023] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input3
  653. [   28.088026] ACPI: Sleep Button [SLPB]
  654. [   28.088144] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
  655. [   28.088166] ACPI: Lid Switch [LID0]
  656. [   28.088222] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
  657. [   28.088225] ACPI: Power Button [PWRF]
  658. [   28.094968] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160831/utaddress-247)
  659. [   28.094976] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  660. [   28.094979] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
  661. [   28.094983] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  662. [   28.094984] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
  663. [   28.094988] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  664. [   28.094988] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
  665. [   28.094992] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  666. [   28.094992] lpc_ich: Resource conflict(s) found affecting gpio_ich
  667. [   28.107197] ata3: SATA link down (SStatus 1 SControl 310)
  668. [   28.107208] ata3: EH complete
  669. [   28.107303] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  670. [   28.108256] ata3: irq_stat 0x00000040, connection status changed
  671. [   28.109026] ata3: SError: { CommWake DevExch }
  672. [   28.109601] ata3: limiting SATA link speed to 1.5 Gbps
  673. [   28.109603] ata3: hard resetting link
  674. [   28.159834] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
  675. [   28.175925] thermal LNXTHERM:00: registered as thermal_zone0
  676. [   28.175928] ACPI: Thermal Zone [TZ00] (28 C)
  677. [   28.187488] wmi: Mapper loaded
  678. [   28.330804] alx 0000:01:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [20:89:84:90:8a:71]
  679. [   28.396449] [drm] Initialized
  680. [   28.437342] ACPI: Battery Slot [BAT1] (battery present)
  681. [   28.437475] ACPI: AC Adapter [ACAD] (on-line)
  682. [   28.540108] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input6
  683. [   28.582464] input: PC Speaker as /devices/platform/pcspkr/input/input7
  684. [   28.604278] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
  685. [   28.627609] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
  686. [   28.627612] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
  687. [   28.627613] RAPL PMU: hw unit of domain package 2^-16 Joules
  688. [   28.627614] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
  689. [   29.088184] [drm] Memory usable by graphics device = 2048M
  690. [   29.088188] checking generic (d0000000 410000) vs hw (d0000000 10000000)
  691. [   29.088189] fb: switching to inteldrmfb from VESA VGA
  692. [   29.088218] Console: switching to colour dummy device 80x25
  693. [   29.088322] [drm] Replacing VGA console driver
  694. [   29.093988] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  695. [   29.093989] [drm] Driver supports precise vblank timestamp query.
  696. [   29.096381] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
  697. [   29.121742] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
  698. [   29.121860] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:02/input/input9
  699. [   29.121932] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
  700. [   29.144369] fbcon: inteldrmfb (fb0) is primary device
  701. [   29.698315] snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing.
  702. [   29.698766] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
  703. [   29.698768] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
  704. [   29.698770] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
  705. [   29.698771] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
  706. [   29.698772] snd_hda_codec_conexant hdaudioC0D0:    inputs:
  707. [   29.698774] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x1b
  708. [   29.698775] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x1a
  709. [   29.699873] systemd[1]: Found device HITACHI_HTS723232A7A364 AntergosBoot.
  710. [   29.699961] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
  711. [   29.719803] psmouse serio1: synaptics: queried max coordinates: x [..5728], y [..4902]
  712. [   29.767381] systemd[1]: Mounting /boot...
  713. [   29.821912] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400/0x0, board id: 1695, fw id: 739436
  714. [   29.887862] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
  715. [   30.041888] Console: switching to colour frame buffer device 170x48
  716. [   30.086576] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
  717. [   30.174676] iTCO_vendor_support: vendor-support=0
  718. [   30.183812] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
  719. [   30.183858] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
  720. [   30.184543] intel_rapl: Found RAPL domain package
  721. [   30.184545] intel_rapl: Found RAPL domain core
  722. [   30.184546] intel_rapl: Found RAPL domain uncore
  723. [   30.184551] intel_rapl: RAPL package 0 domain package locked by BIOS
  724. [   30.187446] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
  725. [   30.355000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered
  726. [   30.368217] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops vgt_balloon_space [i915])
  727. [   30.371110] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
  728. [   30.371382] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
  729. [   30.371453] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
  730. [   30.371519] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
  731. [   30.412179] alx 0000:01:00.0 enp1s0: renamed from eth0
  732. [   30.536230] systemd[1]: Mounted /boot.
  733. [   30.538438] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
  734. [   30.539426] systemd[1]: Starting Load/Save RF Kill Switch Status...
  735. [   30.560763] ata3: SATA link down (SStatus 1 SControl 310)
  736. [   30.560781] ata3: EH complete
  737. [   30.561534] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  738. [   30.561597] ata3: irq_stat 0x00000040, connection status changed
  739. [   30.561637] ata3: SError: { CommWake DevExch }
  740. [   30.561672] ata3: limiting SATA link speed to 1.5 Gbps
  741. [   30.561675] ata3: hard resetting link
  742. [   30.710181] wl: module license 'Mixed/Proprietary' taints kernel.
  743. [   30.710183] Disabling lock debugging due to kernel taint
  744. [   30.752161] wlan0: Broadcom BCM4727 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334)
  745.  
  746. [   30.860186] systemd[1]: Found device HITACHI_HTS723232A7A364 AntergosSwap.
  747. [   30.860969] systemd[1]: Activating swap /dev/disk/by-uuid/1faf6dd3-8afe-4707-b0f6-00d35832d024...
  748. [   31.202773] systemd[1]: Found device HITACHI_HTS723232A7A364 3.
  749. [   31.203620] systemd[1]: Starting Cryptography Setup for cryptAntergosHome...
  750. [   31.271058] Adding 3951956k swap on /dev/sda5.  Priority:-1 extents:1 across:3951956k FS
  751. [   31.275296] systemd[1]: Activated swap /dev/disk/by-uuid/1faf6dd3-8afe-4707-b0f6-00d35832d024.
  752. [   31.738335] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:192F:0916.0001/input/input14
  753. [   31.738427] hid-generic 0003:192F:0916.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.0-1.2/input0
  754. [   31.792548] media: Linux media interface: v0.10
  755. [   31.812942] Linux video capture interface: v2.00
  756. [   31.832728] Bluetooth: Core ver 2.22
  757. [   31.832918] NET: Registered protocol family 31
  758. [   31.832919] Bluetooth: HCI device and connection manager initialized
  759. [   31.832924] Bluetooth: HCI socket layer initialized
  760. [   31.832926] Bluetooth: L2CAP socket layer initialized
  761. [   31.832933] Bluetooth: SCO socket layer initialized
  762. [   31.871519] mousedev: PS/2 mouse device common for all mice
  763. [   31.883730] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (04f2:b2e1)
  764. [   31.884775] uvcvideo 4-1.6:1.0: Entity type for entity Processing 2 was not initialized!
  765. [   31.884778] uvcvideo 4-1.6:1.0: Entity type for entity Camera 1 was not initialized!
  766. [   31.884780] uvcvideo 4-1.6:1.0: Entity type for entity Extension 4 was not initialized!
  767. [   31.885008] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/input/input15
  768. [   31.885330] usbcore: registered new interface driver uvcvideo
  769. [   31.885330] USB Video Class driver (1.1.1)
  770. [   31.885920] usbcore: registered new interface driver btusb
  771. [   31.894837] Bluetooth: hci0: BCM: chip id 63
  772. [   31.910835] Bluetooth: hci0: BCM20702A
  773. [   31.911840] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
  774. [   32.045944] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0489-e032.hcd failed with error -2
  775. [   32.045949] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0489-e032.hcd not found
  776. [   32.447677] wl 0000:02:00.0 wlp2s0: renamed from wlan0
  777. [   32.794290] ata3: SATA link down (SStatus 1 SControl 310)
  778. [   32.794302] ata3: EH complete
  779. [   32.794459] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  780. [   32.794512] ata3: irq_stat 0x00000040, connection status changed
  781. [   32.794548] ata3: SError: { CommWake DevExch }
  782. [   32.794579] ata3: limiting SATA link speed to 1.5 Gbps
  783. [   32.794581] ata3: hard resetting link
  784. [   33.443588] systemd-journald[198]: Received request to flush runtime journal from PID 1
  785. [   35.001158] ata3: SATA link down (SStatus 1 SControl 310)
  786. [   35.001176] ata3: EH complete
  787. [   35.001556] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  788. [   35.001624] ata3: irq_stat 0x00000040, connection status changed
  789. [   35.001674] ata3: SError: { CommWake DevExch }
  790. [   35.001720] ata3: limiting SATA link speed to 1.5 Gbps
  791. [   35.001723] ata3: hard resetting link
  792. [   37.274712] ata3: SATA link down (SStatus 1 SControl 310)
  793. [   37.274725] ata3: EH complete
  794. [   37.275454] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  795. [   37.275530] ata3: irq_stat 0x00000040, connection status changed
  796. [   37.275580] ata3: SError: { CommWake DevExch }
  797. [   37.275625] ata3: limiting SATA link speed to 1.5 Gbps
  798. [   37.275628] ata3: hard resetting link
  799. [   37.771604] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
  800. [   39.484893] ata3: SATA link down (SStatus 1 SControl 310)
  801. [   39.484910] ata3: EH complete
  802. [   39.485252] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  803. [   39.485305] ata3: irq_stat 0x00000040, connection status changed
  804. [   39.485339] ata3: SError: { CommWake DevExch }
  805. [   39.485371] ata3: limiting SATA link speed to 1.5 Gbps
  806. [   39.485373] ata3: hard resetting link
  807. [   41.564394] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
  808. [   41.567400] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
  809. [   41.592293] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
  810. [   41.701756] ata3: SATA link down (SStatus 1 SControl 310)
  811. [   41.701767] ata3: EH complete
  812. [   41.702119] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  813. [   41.702170] ata3: irq_stat 0x00000040, connection status changed
  814. [   41.702204] ata3: SError: { CommWake DevExch }
  815. [   41.702235] ata3: limiting SATA link speed to 1.5 Gbps
  816. [   41.702237] ata3: hard resetting link
  817. [   43.249308] ERROR @wl_cfg80211_scan :
  818. [   43.249313] WLC_SCAN error (-22)
  819. [   43.911975] ata3: SATA link down (SStatus 1 SControl 310)
  820. [   43.911989] ata3: EH complete
  821. [   43.913926] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  822. [   43.913930] ata3: irq_stat 0x00000040, connection status changed
  823. [   43.913932] ata3: SError: { CommWake DevExch }
  824. [   43.913938] ata3: limiting SATA link speed to 1.5 Gbps
  825. [   43.913940] ata3: hard resetting link
  826. [   46.122178] ata3: SATA link down (SStatus 1 SControl 310)
  827. [   46.122195] ata3: EH complete
  828. [   46.122737] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  829. [   46.122752] ata3: irq_stat 0x00000040, connection status changed
  830. [   46.122756] ata3: SError: { CommWake DevExch }
  831. [   46.122767] ata3: limiting SATA link speed to 1.5 Gbps
  832. [   46.122770] ata3: hard resetting link
  833. [   46.794622] fuse init (API version 7.26)
  834. [   48.335718] ata3: SATA link down (SStatus 1 SControl 310)
  835. [   48.335729] ata3: EH complete
  836. [   48.335954] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  837. [   48.335968] ata3: irq_stat 0x00000040, connection status changed
  838. [   48.335971] ata3: SError: { CommWake DevExch }
  839. [   48.335988] ata3: limiting SATA link speed to 1.5 Gbps
  840. [   48.335990] ata3: hard resetting link
  841. [   50.549265] ata3: SATA link down (SStatus 1 SControl 310)
  842. [   50.549278] ata3: EH complete
  843. [   50.550126] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  844. [   50.550131] ata3: irq_stat 0x00000040, connection status changed
  845. [   50.550133] ata3: SError: { CommWake DevExch }
  846. [   50.550141] ata3: limiting SATA link speed to 1.5 Gbps
  847. [   50.550143] ata3: hard resetting link
  848. [   52.759501] ata3: SATA link down (SStatus 1 SControl 310)
  849. [   52.759515] ata3: EH complete
  850. [   52.759682] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  851. [   52.759688] ata3: irq_stat 0x00000040, connection status changed
  852. [   52.759691] ata3: SError: { CommWake DevExch }
  853. [   52.759699] ata3: limiting SATA link speed to 1.5 Gbps
  854. [   52.759701] ata3: hard resetting link
  855. [   54.966313] ata3: SATA link down (SStatus 1 SControl 310)
  856. [   54.966329] ata3: EH complete
  857. [   54.966619] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  858. [   54.966626] ata3: irq_stat 0x00000040, connection status changed
  859. [   54.966629] ata3: SError: { CommWake DevExch }
  860. [   54.966640] ata3: limiting SATA link speed to 1.5 Gbps
  861. [   54.966643] ata3: hard resetting link
  862. [   57.173190] ata3: SATA link down (SStatus 1 SControl 310)
  863. [   57.173204] ata3: EH complete
  864. [   57.173615] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  865. [   57.173631] ata3: irq_stat 0x00000040, connection status changed
  866. [   57.173634] ata3: SError: { CommWake DevExch }
  867. [   57.173642] ata3: limiting SATA link speed to 1.5 Gbps
  868. [   57.173645] ata3: hard resetting link
  869. [   59.380076] ata3: SATA link down (SStatus 1 SControl 310)
  870. [   59.380090] ata3: EH complete
  871. [   59.380588] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  872. [   59.380602] ata3: irq_stat 0x00000040, connection status changed
  873. [   59.380605] ata3: SError: { CommWake DevExch }
  874. [   59.380615] ata3: limiting SATA link speed to 1.5 Gbps
  875. [   59.380617] ata3: hard resetting link
  876. [   61.586919] ata3: SATA link down (SStatus 1 SControl 310)
  877. [   61.586937] ata3: EH complete
  878. [   61.587615] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  879. [   61.587621] ata3: irq_stat 0x00000040, connection status changed
  880. [   61.587625] ata3: SError: { CommWake DevExch }
  881. [   61.587635] ata3: limiting SATA link speed to 1.5 Gbps
  882. [   61.587638] ata3: hard resetting link
  883. [   63.793797] ata3: SATA link down (SStatus 1 SControl 310)
  884. [   63.793813] ata3: EH complete
  885. [   63.794617] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  886. [   63.794623] ata3: irq_stat 0x00000040, connection status changed
  887. [   63.794626] ata3: SError: { CommWake DevExch }
  888. [   63.794633] ata3: limiting SATA link speed to 1.5 Gbps
  889. [   63.794635] ata3: hard resetting link
  890. [   66.000653] ata3: SATA link down (SStatus 1 SControl 310)
  891. [   66.000684] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen t4
  892. [   66.000691] ata3: irq_stat 0x00000040, connection status changed
  893. [   66.000694] ata3: SError: { CommWake DevExch }
  894. [   66.000701] ata3: limiting SATA link speed to 1.5 Gbps
  895. [   66.000704] ata3: hard resetting link
  896. [   68.207527] ata3: SATA link down (SStatus 1 SControl 310)
  897. [   68.207543] ata3: EH complete
  898. [   68.207708] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  899. [   68.207713] ata3: irq_stat 0x00000040, connection status changed
  900. [   68.207716] ata3: SError: { CommWake DevExch }
  901. [   68.207726] ata3: limiting SATA link speed to 1.5 Gbps
  902. [   68.207729] ata3: hard resetting link
  903. [   70.403339] ata3: SATA link down (SStatus 1 SControl 310)
  904. [   70.403357] ata3: EH complete
  905. [   70.404044] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  906. [   70.404051] ata3: irq_stat 0x00000040, connection status changed
  907. [   70.404064] ata3: SError: { CommWake DevExch }
  908. [   70.404073] ata3: limiting SATA link speed to 1.5 Gbps
  909. [   70.404076] ata3: hard resetting link
  910. [   72.603466] ata3: SATA link down (SStatus 1 SControl 310)
  911. [   72.603482] ata3: EH complete
  912. [   72.603946] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  913. [   72.603953] ata3: irq_stat 0x00000040, connection status changed
  914. [   72.603956] ata3: SError: { CommWake DevExch }
  915. [   72.603964] ata3: limiting SATA link speed to 1.5 Gbps
  916. [   72.603966] ata3: hard resetting link
  917. [   74.798259] ata3: SATA link down (SStatus 1 SControl 310)
  918. [   74.798278] ata3: EH complete
  919. [   74.798497] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  920. [   74.798504] ata3: irq_stat 0x00000040, connection status changed
  921. [   74.798508] ata3: SError: { CommWake DevExch }
  922. [   74.798518] ata3: limiting SATA link speed to 1.5 Gbps
  923. [   74.798521] ata3: hard resetting link
  924. [   76.995914] ata3: SATA link down (SStatus 1 SControl 310)
  925. [   76.995931] ata3: EH complete
  926. [   76.996617] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  927. [   76.996624] ata3: irq_stat 0x00000040, connection status changed
  928. [   76.996627] ata3: SError: { CommWake DevExch }
  929. [   76.996639] ata3: limiting SATA link speed to 1.5 Gbps
  930. [   76.996641] ata3: hard resetting link
  931. [   79.199300] ata3: SATA link down (SStatus 1 SControl 310)
  932. [   79.199314] ata3: EH complete
  933.  
  934. *****
  935.  
  936. [  775.936797] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  937. [  775.936802] ata3: irq_stat 0x00000040, connection status changed
  938. [  775.936805] ata3: SError: { CommWake DevExch }
  939. [  775.936813] ata3: limiting SATA link speed to 1.5 Gbps
  940. [  775.936816] ata3: hard resetting link
  941. [  778.143547] ata3: SATA link down (SStatus 1 SControl 310)
  942. [  778.143566] ata3: EH complete
  943. [  778.143808] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  944. [  778.143815] ata3: irq_stat 0x00000040, connection status changed
  945. [  778.143818] ata3: SError: { CommWake DevExch }
  946. [  778.143830] ata3: limiting SATA link speed to 1.5 Gbps
  947. [  778.143832] ata3: hard resetting link
  948. [  780.353735] ata3: SATA link down (SStatus 1 SControl 310)
  949. [  780.353750] ata3: EH complete
  950. [  780.354392] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  951. [  780.354398] ata3: irq_stat 0x00000040, connection status changed
  952. [  780.354401] ata3: SError: { CommWake DevExch }
  953. [  780.354411] ata3: limiting SATA link speed to 1.5 Gbps
  954. [  780.354413] ata3: hard resetting link
  955. [  782.560570] ata3: SATA link down (SStatus 1 SControl 310)
  956. [  782.560588] ata3: EH complete
  957. [  782.561377] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  958. [  782.561384] ata3: irq_stat 0x00000040, connection status changed
  959. [  782.561388] ata3: SError: { CommWake DevExch }
  960. [  782.561398] ata3: limiting SATA link speed to 1.5 Gbps
  961. [  782.561401] ata3: hard resetting link
  962. [  784.767375] ata3: SATA link down (SStatus 1 SControl 310)
  963. [  784.767389] ata3: EH complete
  964. [  784.767567] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  965. [  784.767573] ata3: irq_stat 0x00000040, connection status changed
  966. [  784.767576] ata3: SError: { CommWake DevExch }
  967. [  784.767586] ata3: limiting SATA link speed to 1.5 Gbps
  968. [  784.767589] ata3: hard resetting link
  969. [  786.977525] ata3: SATA link down (SStatus 1 SControl 310)
  970. [  786.977541] ata3: EH complete
  971. [  786.978150] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  972. [  786.978157] ata3: irq_stat 0x00000040, connection status changed
  973. [  786.978160] ata3: SError: { CommWake DevExch }
  974. [  786.978170] ata3: limiting SATA link speed to 1.5 Gbps
  975. [  786.978173] ata3: hard resetting link
  976. [  789.187688] ata3: SATA link down (SStatus 1 SControl 310)
  977. [  789.187702] ata3: EH complete
  978. [  789.187832] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  979. [  789.187838] ata3: irq_stat 0x00000040, connection status changed
  980. [  789.187842] ata3: SError: { CommWake DevExch }
  981. [  789.187853] ata3: limiting SATA link speed to 1.5 Gbps
  982. [  789.187856] ata3: hard resetting link
  983. [  791.397885] ata3: SATA link down (SStatus 1 SControl 310)
  984. [  791.397897] ata3: EH complete
  985. [  791.398317] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  986. [  791.398322] ata3: irq_stat 0x00000040, connection status changed
  987. [  791.398325] ata3: SError: { CommWake DevExch }
  988. [  791.398335] ata3: limiting SATA link speed to 1.5 Gbps
  989. [  791.398337] ata3: hard resetting link
  990. [  793.604681] ata3: SATA link down (SStatus 1 SControl 310)
  991. [  793.604695] ata3: EH complete
  992. [  793.605328] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  993. [  793.605334] ata3: irq_stat 0x00000040, connection status changed
  994. [  793.605338] ata3: SError: { CommWake DevExch }
  995. [  793.605349] ata3: limiting SATA link speed to 1.5 Gbps
  996. [  793.605352] ata3: hard resetting link
  997. [  795.811513] ata3: SATA link down (SStatus 1 SControl 310)
  998. [  795.811526] ata3: EH complete
  999. [  795.812357] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  1000. [  795.812364] ata3: irq_stat 0x00000040, connection status changed
  1001. [  795.812368] ata3: SError: { CommWake DevExch }
  1002. [  795.812377] ata3: limiting SATA link speed to 1.5 Gbps
  1003. [  795.812380] ata3: hard resetting link
  1004. [  798.018366] ata3: SATA link down (SStatus 1 SControl 310)
  1005. [  798.018385] ata3: EH complete
  1006. [  798.018446] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  1007. [  798.018452] ata3: irq_stat 0x00000040, connection status changed
  1008. [  798.018455] ata3: SError: { CommWake DevExch }
  1009. [  798.018464] ata3: limiting SATA link speed to 1.5 Gbps
  1010. [  798.018467] ata3: hard resetting link
  1011. [  800.225194] ata3: SATA link down (SStatus 1 SControl 310)
  1012. [  800.225212] ata3: EH complete
  1013. [  800.225447] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  1014. [  800.225454] ata3: irq_stat 0x00000040, connection status changed
  1015. [  800.225457] ata3: SError: { CommWake DevExch }
  1016. [  800.225468] ata3: limiting SATA link speed to 1.5 Gbps
  1017. [  800.225471] ata3: hard resetting link
  1018. [  802.431994] ata3: SATA link down (SStatus 1 SControl 310)
  1019. [  802.432010] ata3: EH complete
  1020. [  802.432473] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  1021. [  802.432480] ata3: irq_stat 0x00000040, connection status changed
  1022. [  802.432484] ata3: SError: { CommWake DevExch }
  1023. [  802.432494] ata3: limiting SATA link speed to 1.5 Gbps
  1024. [  802.432497] ata3: hard resetting link
  1025. [  804.642164] ata3: SATA link down (SStatus 1 SControl 310)
  1026. [  804.642181] ata3: EH complete
  1027. [  804.643062] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
  1028. [  804.643068] ata3: irq_stat 0x00000040, connection status changed
  1029. [  804.643072] ata3: SError: { CommWake DevExch }
  1030. [  804.643083] ata3: limiting SATA link speed to 1.5 Gbps
  1031. [  804.643085] ata3: hard resetting link
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top