daily pastebin goal
66%
SHARE
TWEET

Untitled

a guest Mar 15th, 2018 105 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. RomBOOT
  2.  
  3. AT91Bootstrap 3.8.10-rc1 (Fri Mar  9 14:24:18 CET 2018)
  4.  
  5. NAND: ONFI flash detected
  6. NAND: Manufacturer ID: 0x2c Chip ID: 0xda
  7. NAND: Page Bytes: 2048, Spare Bytes: 64
  8. NAND: ECC Correctability Bits: 4, ECC Sector Bytes: 512
  9. NAND: Disable On-Die ECC
  10. NAND: Initialize PMECC params, cap: 4, sector: 512
  11. NAND: Image: Copy 0xa0000 bytes from 0x40000 to 0x26f00000
  12. NAND: Done to load image
  13. <debug_uart>
  14.  
  15. U-Boot 2017.03-linux4sam_5.7 (Mar 13 2018 - 11:21:11 +0100)
  16.  
  17. CPU: SAMA5D36
  18. Crystal frequency:       12 MHz
  19. CPU clock        :      528 MHz
  20. Master clock     :      132 MHz
  21. DRAM:  256 MiB
  22. NAND:  256 MiB
  23. MMC:   Atmel mci: 0, Atmel mci: 1
  24. *** Warning - bad CRC, using default environment
  25.  
  26. In:    serial@ffffee00
  27. Out:   serial@ffffee00
  28. Err:   serial@ffffee00
  29. Net:   Net Initialization Skipped
  30. No ethernet found.
  31. Hit any key to stop autoboot:  3  2  1  0
  32. ubi0: attaching mtd1
  33. ubi0: scanning is finished
  34. ubi0: volume 5 ("data") re-sized from 166 to 1002 LEBs
  35. ubi0: attached mtd1 (name "mtd=4", size 254 MiB)
  36. ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  37. ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  38. ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  39. ubi0: good PEBs: 2038, bad PEBs: 0, corrupted PEBs: 0
  40. ubi0: user volume: 5, internal volumes: 1, max. volumes count: 128
  41. ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 318608396
  42. ubi0: available PEBs: 0, total reserved PEBs: 2038, PEBs reserved for bad PEB handling: 40
  43. Read 0 bytes from volume kernel1 to 22000000
  44. No size specified -> Using max size (10539008)
  45. ## Loading kernel from FIT Image at 22000000 ...
  46.    Using 'conf@1' configuration
  47.    Trying 'kernel@1' kernel subimage
  48.      Description:  Linux kernel
  49.      Type:         Kernel Image
  50.      Compression:  uncompressed
  51.      Data Start:   0x2200010c
  52.      Data Size:    3743568 Bytes = 3.6 MiB
  53.      Architecture: ARM
  54.      OS:           Linux
  55.      Load Address: 0x20008000
  56.      Entry Point:  0x20008000
  57.      Hash algo:    sha1
  58.      Hash value:   901a398c4ad4b549bb6a0cb474f800804fcee0ca
  59.    Verifying Hash Integrity ... sha1+ OK
  60. ## Loading fdt from FIT Image at 22000000 ...
  61.    Using 'conf@1' configuration
  62.    Trying 'fdt@1' fdt subimage
  63.      Description:  Flattened Device Tree blob
  64.      Type:         Flat Device Tree
  65.      Compression:  uncompressed
  66.      Data Start:   0x22392150
  67.      Data Size:    33921 Bytes = 33.1 KiB
  68.      Architecture: ARM
  69.      Hash algo:    sha1
  70.      Hash value:   9786a5aca7567a6d4bcfb0300f68adcbfe4cf80d
  71.    Verifying Hash Integrity ... sha1+ OK
  72.    Booting using the fdt blob at 0x22392150
  73.    Loading Kernel Image ... OK
  74.    Loading Device Tree to 2fb6d000, end 2fb78480 ... OK
  75.  
  76. Starting kernel ...
  77.  
  78. Booting Linux on physical CPU 0x0
  79. Linux version 4.9.52-linux4sam_5.7 (arek@arek-neon) (gcc version 6.2.0 (GCC) ) #1 Wed Mar 14 14:40:59 CET 2018
  80. CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c53c7d
  81. CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  82. OF: fdt:Machine model: SAMA5D3 Xplained
  83. cma: Reserved 64 MiB at 0x28000000
  84. Memory policy: Data cache writeback
  85. CPU: All CPU(s) started in SVC mode.
  86. Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 65024
  87. Kernel command line: ubi.mtd=4 root=ubi0:root1 rootfstype=ubifs console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env1),256k(env2),-(sys)
  88. PID hash table entries: 1024 (order: 0, 4096 bytes)
  89. Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  90. Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  91. Memory: 184432K/262144K available (6144K kernel code, 192K rwdata, 1416K rodata, 1024K init, 169K bss, 12176K reserved, 65536K cma-reserved)
  92. Virtual kernel memory layout:
  93.     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  94.     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
  95.     vmalloc : 0xd0800000 - 0xff800000   ( 752 MB)
  96.     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
  97.     modules : 0xbf000000 - 0xc0000000   (  16 MB)
  98.       .text : 0xc0008000 - 0xc0700000   (7136 kB)
  99.       .init : 0xc0900000 - 0xc0a00000   (1024 kB)
  100.       .data : 0xc0a00000 - 0xc0a30350   ( 193 kB)
  101.        .bss : 0xc0a30350 - 0xc0a5ab40   ( 170 kB)
  102. NR_IRQS:16 nr_irqs:16 16
  103. clocksource: pit: mask: 0xfffffff max_cycles: 0xfffffff, max_idle_ns: 14479245754 ns
  104. sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 21474836475000000ns
  105. Console: colour dummy device 80x30
  106. Calibrating delay loop... 351.43 BogoMIPS (lpj=1757184)
  107. pid_max: default: 32768 minimum: 301
  108. Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  109. Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  110. CPU: Testing write buffer coherency: ok
  111. Setting up static identity map for 0x20100000 - 0x20100058
  112. devtmpfs: initialized
  113. VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
  114. clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  115. futex hash table entries: 256 (order: -1, 3072 bytes)
  116. pinctrl core: initialized pinctrl subsystem
  117. NET: Registered protocol family 16
  118. DMA: preallocated 256 KiB pool for atomic coherent allocations
  119. cpuidle: using governor ladder
  120. AT91: PM: standby: standby, suspend: ulp0
  121. gpio-at91 fffff200.gpio: at address d0814200
  122. gpio-at91 fffff400.gpio: at address d0816400
  123. gpio-at91 fffff600.gpio: at address d0818600
  124. gpio-at91 fffff800.gpio: at address d081a800
  125. gpio-at91 fffffa00.gpio: at address d081ca00
  126. pinctrl-at91 ahb:apb:pinctrl@fffff200: initialized AT91 pinctrl driver
  127. clocksource: tcb_clksrc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 115833966437 ns
  128. at_hdmac ffffe600.dma-controller: Atmel AHB DMA Controller ( cpy set slave sg-cpy ), 8 channels
  129. at_hdmac ffffe800.dma-controller: Atmel AHB DMA Controller ( cpy set slave sg-cpy ), 8 channels
  130. AT91: Detected SoC family: sama5d3
  131. AT91: Detected SoC: sama5d36, revision 2
  132. SCSI subsystem initialized
  133. usbcore: registered new interface driver usbfs
  134. usbcore: registered new interface driver hub
  135. usbcore: registered new device driver usb
  136. at91_i2c f0018000.i2c: using dma0chan0 (tx) and dma0chan1 (rx) for DMA transfers
  137. at91_i2c f0018000.i2c: AT91 i2c bus driver (hw version: 0x402).
  138. clocksource: Switched to clocksource tcb_clksrc
  139. NET: Registered protocol family 2
  140. TCP established hash table entries: 2048 (order: 1, 8192 bytes)
  141. TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
  142. TCP: Hash tables configured (established 2048 bind 2048)
  143. UDP hash table entries: 256 (order: 0, 4096 bytes)
  144. UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  145. NET: Registered protocol family 1
  146. RPC: Registered named UNIX socket transport module.
  147. RPC: Registered udp transport module.
  148. RPC: Registered tcp transport module.
  149. RPC: Registered tcp NFSv4.1 backchannel transport module.
  150. workingset: timestamp_bits=30 max_order=16 bucket_order=0
  151. squashfs: version 4.0 (2009/01/31) Phillip Lougher
  152. io scheduler noop registered (default)
  153. f001c000.serial: ttyS1 at MMIO 0xf001c000 (irq = 21, base_baud = 4125000) is a ATMEL_SERIAL
  154. f0020000.serial: ttyS2 at MMIO 0xf0020000 (irq = 22, base_baud = 4125000) is a ATMEL_SERIAL
  155. f0024000.serial: ttyS5 at MMIO 0xf0024000 (irq = 23, base_baud = 4125000) is a ATMEL_SERIAL
  156. f8020000.serial: ttyS3 at MMIO 0xf8020000 (irq = 25, base_baud = 4125000) is a ATMEL_SERIAL
  157. f8024000.serial: ttyS4 at MMIO 0xf8024000 (irq = 26, base_baud = 4125000) is a ATMEL_SERIAL
  158. ffffee00.serial: ttyS0 at MMIO 0xffffee00 (irq = 33, base_baud = 8250000) is a ATMEL_SERIAL
  159. console [ttyS0] enabled
  160. [drm] Initialized
  161. brd: module loaded
  162. loop: module loaded
  163. atmel_nand_nfc 70000000.nfc: NFC is probed.
  164. atmel_nand 60000000.nand: Using dma0chan2 for DMA transfers.
  165. nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
  166. nand: Micron MT29F2G08ABAEAH4
  167. nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  168. atmel_nand 60000000.nand: Use On Flash BBT
  169. atmel_nand 60000000.nand: minimum ECC: 4 bits in 512 bytes
  170. atmel_nand 60000000.nand: Initialize PMECC params, cap: 4, sector: 512
  171. atmel_nand 60000000.nand: Using NFC Sram read
  172. Bad block table not found for chip 0
  173. Bad block table not found for chip 0
  174. Scanning device for bad blocks
  175. random: fast init done
  176. Bad block table written to 0x00000ffe0000, version 0x01
  177. Bad block table written to 0x00000ffc0000, version 0x01
  178. 5 cmdlinepart partitions found on MTD device atmel_nand
  179. Creating 5 MTD partitions on "atmel_nand":
  180. 0x000000000000-0x000000040000 : "bootstrap"
  181. 0x000000040000-0x0000000c0000 : "uboot"
  182. 0x0000000c0000-0x000000100000 : "env1"
  183. 0x000000100000-0x000000140000 : "env2"
  184. 0x000000140000-0x000010000000 : "sys"
  185. atmel_spi f8008000.spi: Using dma1chan0 (tx) and dma1chan1 (rx) for DMA transfers
  186. spidev spi32766.0: buggy DT: spidev listed directly in DT
  187. ------------[ cut here ]------------
  188. WARNING: CPU: 0 PID: 1 at /media/arek/personal/yocto/poky/build-agb2000/tmp/work-shared/agb2000/kernel-source/drivers/spi/spidev.c:757 spidev_probe+0x1a4/0x1c4
  189. Modules linked in:
  190. CPU: 0 PID: 1 Comm: swapper Not tainted 4.9.52-linux4sam_5.7 #1
  191. Hardware name: Atmel SAMA5
  192. [<c010c9d4>] (unwind_backtrace) from [<c010a714>] (show_stack+0x10/0x14)
  193. [<c010a714>] (show_stack) from [<c0115dcc>] (__warn+0xe4/0xfc)
  194. [<c0115dcc>] (__warn) from [<c0115e94>] (warn_slowpath_null+0x20/0x28)
  195. [<c0115e94>] (warn_slowpath_null) from [<c040dfe0>] (spidev_probe+0x1a4/0x1c4)
  196. [<c040dfe0>] (spidev_probe) from [<c040b374>] (spi_drv_probe+0x7c/0xac)
  197. [<c040b374>] (spi_drv_probe) from [<c03aa56c>] (driver_probe_device+0x204/0x2b0)
  198. [<c03aa56c>] (driver_probe_device) from [<c03a89f8>] (bus_for_each_drv+0x60/0x94)
  199. [<c03a89f8>] (bus_for_each_drv) from [<c03aa288>] (__device_attach+0xb0/0x114)
  200. [<c03aa288>] (__device_attach) from [<c03a97d4>] (bus_probe_device+0x84/0x8c)
  201. [<c03a97d4>] (bus_probe_device) from [<c03a7be4>] (device_add+0x3f4/0x580)
  202. [<c03a7be4>] (device_add) from [<c040c0a4>] (spi_add_device+0x98/0x130)
  203. [<c040c0a4>] (spi_add_device) from [<c040c8e8>] (spi_register_master+0x478/0x754)
  204. [<c040c8e8>] (spi_register_master) from [<c040cbfc>] (devm_spi_register_master+0x38/0x70)
  205. [<c040cbfc>] (devm_spi_register_master) from [<c0410618>] (atmel_spi_probe+0x4c0/0x630)
  206. [<c0410618>] (atmel_spi_probe) from [<c03abd24>] (platform_drv_probe+0x50/0xb0)
  207. [<c03abd24>] (platform_drv_probe) from [<c03aa56c>] (driver_probe_device+0x204/0x2b0)
  208. [<c03aa56c>] (driver_probe_device) from [<c03aa6d0>] (__driver_attach+0xb8/0xbc)
  209. [<c03aa6d0>] (__driver_attach) from [<c03a8950>] (bus_for_each_dev+0x68/0x9c)
  210. [<c03a8950>] (bus_for_each_dev) from [<c03a99e0>] (bus_add_driver+0x100/0x20c)
  211. [<c03a99e0>] (bus_add_driver) from [<c03aadcc>] (driver_register+0x78/0xf4)
  212. [<c03aadcc>] (driver_register) from [<c01016b4>] (do_one_initcall+0x44/0x16c)
  213. [<c01016b4>] (do_one_initcall) from [<c0900d64>] (kernel_init_freeable+0x130/0x1bc)
  214. [<c0900d64>] (kernel_init_freeable) from [<c062f918>] (kernel_init+0x8/0x110)
  215. [<c062f918>] (kernel_init) from [<c0107498>] (ret_from_fork+0x14/0x3c)
  216. ---[ end trace 759d06766aeecf54 ]---
  217. atmel_spi f8008000.spi: Atmel SPI Controller version 0x213 at 0xf8008000 (irq 24)
  218. libphy: Fixed MDIO Bus: probed
  219. macb f802c000.ethernet: invalid hw address, using random
  220. libphy: MACB_mii_bus: probed
  221. Micrel KSZ8081 or KSZ8091 f802c000.etherne:01: attached PHY driver [Micrel KSZ8081 or KSZ8091] (mii_bus:phy_addr=f802c000.etherne:01, irq=-1)
  222. macb f802c000.ethernet eth0: Cadence MACB rev 0x0001010c at 0xf802c000 irq 40 (a2:44:57:43:90:41)
  223. PPP generic driver version 2.4.2
  224. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  225. ehci-atmel: EHCI Atmel driver
  226. atmel-ehci 700000.ehci: EHCI Host Controller
  227. atmel-ehci 700000.ehci: new USB bus registered, assigned bus number 1
  228. atmel-ehci 700000.ehci: irq 43, io mem 0x00700000
  229. atmel-ehci 700000.ehci: USB 2.0 started, EHCI 1.00
  230. usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  231. usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  232. usb usb1: Product: EHCI Host Controller
  233. usb usb1: Manufacturer: Linux 4.9.52-linux4sam_5.7 ehci_hcd
  234. usb usb1: SerialNumber: 700000.ehci
  235. hub 1-0:1.0: USB hub found
  236. hub 1-0:1.0: 3 ports detected
  237. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  238. ohci-atmel: OHCI Atmel driver
  239. at91_ohci 600000.ohci: failed to find sfr node
  240. at91_ohci 600000.ohci: USB Host Controller
  241. at91_ohci 600000.ohci: new USB bus registered, assigned bus number 2
  242. at91_ohci 600000.ohci: irq 43, io mem 0x00600000
  243. usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  244. usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  245. usb usb2: Product: USB Host Controller
  246. usb usb2: Manufacturer: Linux 4.9.52-linux4sam_5.7 ohci_hcd
  247. usb usb2: SerialNumber: at91
  248. hub 2-0:1.0: USB hub found
  249. hub 2-0:1.0: 3 ports detected
  250. usbcore: registered new interface driver cdc_acm
  251. cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  252. usbcore: registered new interface driver usb-storage
  253. usbcore: registered new interface driver usbserial
  254. usbcore: registered new interface driver usbserial_generic
  255. usbserial: USB Serial support registered for generic
  256. usbcore: registered new interface driver ftdi_sio
  257. usbserial: USB Serial support registered for FTDI USB Serial Device
  258. usbcore: registered new interface driver pl2303
  259. usbserial: USB Serial support registered for pl2303
  260. rtc rtc0: alarm rollover not handled
  261. rtc rtc0: invalid alarm value: 1900-1-1 0:0:0
  262. at91_rtc fffffeb0.rtc: rtc core: registered fffffeb0.rtc as rtc0
  263. at91_rtc fffffeb0.rtc: AT91 Real Time Clock driver.
  264. i2c /dev entries driver
  265. AT91: Starting after wakeup
  266. sdhci: Secure Digital Host Controller Interface driver
  267. sdhci: Copyright(c) Pierre Ossman
  268. atmel_mci f0000000.mmc: version: 0x505
  269. atmel_mci f0000000.mmc: using dma0chan3 for DMA transfers
  270. atmel_mci f0000000.mmc: Atmel MCI controller at 0xf0000000 irq 18, 1 slots
  271. sdhci-pltfm: SDHCI platform and OF driver helper
  272. atmel_aes f8038000.aes: version: 0x135
  273. atmel_aes f8038000.aes: Atmel AES - Using dma1chan2, dma1chan3 for DMA transfers
  274. atmel_sha f8034000.sha: version: 0x410
  275. atmel_sha f8034000.sha: using dma1chan4 for DMA transfers
  276. atmel_sha f8034000.sha: Atmel SHA1/SHA256/SHA224/SHA384/SHA512
  277. atmel_tdes f803c000.tdes: version: 0x701
  278. atmel_tdes f803c000.tdes: using dma1chan5, dma1chan6 for DMA transfers
  279. atmel_tdes f803c000.tdes: Atmel DES/TDES
  280. usbcore: registered new interface driver usbhid
  281. usbhid: USB HID core driver
  282. nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
  283. ip_tables: (C) 2000-2006 Netfilter Core Team
  284. NET: Registered protocol family 10
  285. sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  286. NET: Registered protocol family 17
  287. ubi0: attaching mtd4
  288. atmel_nand 60000000.nand: PMECC: Too many errors
  289. ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 2:0, read only 64 bytes, retry
  290. atmel_nand 60000000.nand: PMECC: Too many errors
  291. ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 2:0, read only 64 bytes, retry
  292. atmel_nand 60000000.nand: PMECC: Too many errors
  293. ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 2:0, read only 64 bytes, retry
  294. atmel_nand 60000000.nand: PMECC: Too many errors
  295. ubi0 error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 2:0, read 64 bytes
  296. CPU: 0 PID: 1 Comm: swapper Tainted: G        W       4.9.52-linux4sam_5.7 #1
  297. Hardware name: Atmel SAMA5
  298. [<c010c9d4>] (unwind_backtrace) from [<c010a714>] (show_stack+0x10/0x14)
  299. [<c010a714>] (show_stack) from [<c0401cc8>] (ubi_io_read+0x144/0x328)
  300. [<c0401cc8>] (ubi_io_read) from [<c04020bc>] (ubi_io_read_ec_hdr+0x44/0x1f8)
  301. [<c04020bc>] (ubi_io_read_ec_hdr) from [<c0406b60>] (ubi_attach+0x1a4/0x1414)
  302. [<c0406b60>] (ubi_attach) from [<c03fc19c>] (ubi_attach_mtd_dev+0x3c8/0xbe4)
  303. [<c03fc19c>] (ubi_attach_mtd_dev) from [<c091c434>] (ubi_init+0x1ec/0x28c)
  304. [<c091c434>] (ubi_init) from [<c01016b4>] (do_one_initcall+0x44/0x16c)
  305. [<c01016b4>] (do_one_initcall) from [<c0900d64>] (kernel_init_freeable+0x130/0x1bc)
  306. [<c0900d64>] (kernel_init_freeable) from [<c062f918>] (kernel_init+0x8/0x110)
  307. [<c062f918>] (kernel_init) from [<c0107498>] (ret_from_fork+0x14/0x3c)
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top