Guest User

12.09 kernel Log

a guest
Apr 19th, 2019
50
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [ 0.000000] Linux version 3.3.8 (blogic@Debian-60-squeeze-64-minimal) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Sat Mar 23 16:49:30 UTC 2013
  2. [ 0.000000] MyLoader: sysp=01000000, boardp=00000000, parts=00000000
  3. [ 0.000000] bootconsole [early0] enabled
  4. [ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
  5. [ 0.000000] SoC: Atheros AR9132 rev 2
  6. [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:100.000MHz, Ref:5.000MHz
  7. [ 0.000000] Determined physical RAM map:
  8. [ 0.000000] memory: 02000000 @ 00000000 (usable)
  9. [ 0.000000] Initrd not found or empty - disabling initrd
  10. [ 0.000000] Zone PFN ranges:
  11. [ 0.000000] Normal 0x00000000 -> 0x00002000
  12. [ 0.000000] Movable zone start PFN for each node
  13. [ 0.000000] Early memory PFN ranges
  14. [ 0.000000] 0: 0x00000000 -> 0x00002000
  15. [ 0.000000] On node 0 totalpages: 8192
  16. [ 0.000000] free_area_init_node: node 0, pgdat 802f1100, node_mem_map 81000000
  17. [ 0.000000] Normal zone: 64 pages used for memmap
  18. [ 0.000000] Normal zone: 0 pages reserved
  19. [ 0.000000] Normal zone: 8128 pages, LIFO batch:0
  20. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  21. [ 0.000000] pcpu-alloc: [0] 0
  22. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
  23. [ 0.000000] Kernel command line: board=TL-WR941ND console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
  24. [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
  25. [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  26. [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  27. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  28. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  29. [ 0.000000] Writing ErrCtl register=00000000
  30. [ 0.000000] Readback ErrCtl register=00000000
  31. [ 0.000000] Memory: 29000k/32768k available (2211k kernel code, 3768k reserved, 418k data, 212k init, 0k highmem)
  32. [ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  33. [ 0.000000] NR_IRQS:51
  34. [ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
  35. [ 0.080000] pid_max: default: 32768 minimum: 301
  36. [ 0.080000] Mount-cache hash table entries: 512
  37. [ 0.090000] NET: Registered protocol family 16
  38. [ 0.090000] gpiochip_add: registered GPIOs 0 to 21 on device: ath79
  39. [ 0.100000] MIPS: machine is TP-LINK TL-WR941ND
  40. [ 0.330000] bio: create slab <bio-0> at 0
  41. [ 0.340000] Switching to clocksource MIPS
  42. [ 0.350000] NET: Registered protocol family 2
  43. [ 0.350000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  44. [ 0.350000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
  45. [ 0.360000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  46. [ 0.360000] TCP: Hash tables configured (established 1024 bind 1024)
  47. [ 0.370000] TCP reno registered
  48. [ 0.370000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  49. [ 0.380000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  50. [ 0.390000] NET: Registered protocol family 1
  51. [ 0.390000] PCI: CLS 0 bytes, default 32
  52. [ 0.410000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  53. [ 0.410000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  54. [ 0.420000] msgmni has been set to 56
  55. [ 0.430000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
  56. [ 0.440000] io scheduler noop registered
  57. [ 0.440000] io scheduler deadline registered (default)
  58. [ 0.440000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  59. [ 0.480000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
  60. [ 0.480000] console [ttyS0] enabled, bootconsole disabled
  61. [ 0.500000] m25p80 spi0.0: found 320s33b, expected m25p80
  62. [ 0.500000] m25p80 spi0.0: 320s33b (4096 Kbytes)
  63. [ 0.510000] 5 tp-link partitions found on MTD device spi0.0
  64. [ 0.510000] Creating 5 MTD partitions on "spi0.0":
  65. [ 0.520000] 0x000000000000-0x000000020000 : "u-boot"
  66. [ 0.530000] 0x000000020000-0x00000010bc00 : "kernel"
  67. [ 0.530000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  68. [ 0.540000] 0x00000010bc00-0x0000003f0000 : "rootfs"
  69. [ 0.550000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  70. [ 0.560000] mtd: partition "rootfs" set to be root filesystem
  71. [ 0.570000] mtd: partition "rootfs_data" created automatically, ofs=2E0000, len=110000
  72. [ 0.580000] 0x0000002e0000-0x0000003f0000 : "rootfs_data"
  73. [ 0.580000] 0x0000003f0000-0x000000400000 : "art"
  74. [ 0.590000] 0x000000020000-0x0000003f0000 : "firmware"
  75. [ 0.610000] ag71xx_mdio: probed
  76. [ 0.620000] eth0: Atheros AG71xx at 0xb9000000, irq 4
  77. [ 0.920000] TCP cubic registered
  78. [ 0.930000] NET: Registered protocol family 17
  79. [ 0.930000] Bridge firewalling registered
  80. [ 0.940000] Distributed Switch Architecture driver version 0.1
  81. [ 0.940000] eth0[0]: detected a Marvell 88E6060 switch
  82. [ 0.970000] dsa slave smi: probed
  83. [ 0.980000] 8021q: 802.1Q VLAN Support v1.8
  84. [ 0.990000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  85. [ 1.000000] Freeing unused kernel memory: 212k freed
  86. [ 3.260000] ar71xx: pll_reg 0xb8050014: 0x13000a44
  87. [ 3.260000] eth0: link up (100Mbps/Full duplex)
  88. [ 3.300000] Registered led device: tp-link:green:system
  89. [ 3.300000] Registered led device: tp-link:red:qss
  90. [ 3.300000] Registered led device: tp-link:green:qss
  91. [ 3.300000] Registered led device: tp-link:green:wlan
  92. [ 6.600000] JFFS2 notice: (521) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 31 of xref (0 dead, 21 orphan) found.
  93. [ 6.800000] eth0: link down
  94. [ 8.630000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
  95. [ 8.640000] Backport based on wireless-testing.git master-2012-09-07
  96. [ 8.650000] compat.git: wireless-testing.git
  97. [ 8.670000] cfg80211: Calling CRDA to update world regulatory domain
  98. [ 8.680000] cfg80211: World regulatory domain updated:
  99. [ 8.680000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  100. [ 8.690000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  101. [ 8.700000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  102. [ 8.710000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  103. [ 8.720000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  104. [ 8.720000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  105. [ 9.090000] usbcore: registered new interface driver usbfs
  106. [ 9.090000] usbcore: registered new interface driver hub
  107. [ 9.100000] usbcore: registered new device driver usb
  108. [ 9.730000] ath: EEPROM regdomain: 0x0
  109. [ 9.730000] ath: EEPROM indicates default country code should be used
  110. [ 9.730000] ath: doing EEPROM country->regdmn map search
  111. [ 9.730000] ath: country maps to regdmn code: 0x3a
  112. [ 9.730000] ath: Country alpha2 being used: US
  113. [ 9.730000] ath: Regpair used: 0x3a
  114. [ 9.730000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  115. [ 9.730000] ieee80211 phy0: Atheros AR9100 MAC/BB Rev:7 AR2133 RF Rev:a2 mem=0xb80c0000, irq=2
  116. [ 9.740000] cfg80211: Calling CRDA for country: US
  117. [ 9.750000] cfg80211: Regulatory domain changed to country: US
  118. [ 9.750000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  119. [ 9.760000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  120. [ 9.770000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
  121. [ 9.780000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  122. [ 9.790000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  123. [ 9.790000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  124. [ 9.800000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
  125. [ 9.860000] PPP generic driver version 2.4.2
  126. [ 10.100000] ip_tables: (C) 2000-2006 Netfilter Core Team
  127. [ 10.310000] NET: Registered protocol family 24
  128. [ 10.330000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  129. [ 10.350000] nf_conntrack version 0.5.0 (456 buckets, 1824 max)
  130. [ 10.560000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  131. [ 14.180000] ar71xx: pll_reg 0xb8050014: 0x13000a44
  132. [ 14.190000] eth0: link up (100Mbps/Full duplex)
  133. [ 14.190000] device lan1 entered promiscuous mode
  134. [ 14.200000] device eth0 entered promiscuous mode
  135. [ 14.210000] device lan2 entered promiscuous mode
  136. [ 14.240000] device lan3 entered promiscuous mode
  137. [ 14.260000] device lan4 entered promiscuous mode
  138. [ 19.110000] cfg80211: Calling CRDA for country: BO
  139. [ 19.110000] cfg80211: Regulatory domain changed to country: BO
  140. [ 19.120000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  141. [ 19.130000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 3000 mBm)
  142. [ 19.130000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
  143. [ 22.130000] device wlan0 entered promiscuous mode
  144. [ 22.530000] br-lan: port 5(wlan0) entered forwarding state
  145. [ 22.530000] br-lan: port 5(wlan0) entered forwarding state
  146. [ 24.530000] br-lan: port 5(wlan0) entered forwarding state
  147. [ 26.480000] br-lan: port 5(wlan0) entered disabled state
  148. [ 27.270000] wlan0-1: authenticate with bc:98:89:53:05:c3
  149. [ 27.280000] wlan0-1: send auth to bc:98:89:53:05:c3 (try 1/3)
  150. [ 27.300000] wlan0-1: authenticated
  151. [ 27.320000] wlan0-1: associate with bc:98:89:53:05:c3 (try 1/3)
  152. [ 27.330000] wlan0-1: RX AssocResp from bc:98:89:53:05:c3 (capab=0x431 status=0 aid=6)
  153. [ 27.340000] wlan0-1: associated
  154. [ 28.320000] br-lan: port 5(wlan0) entered forwarding state
  155. [ 28.320000] br-lan: port 5(wlan0) entered forwarding state
  156. [ 30.320000] br-lan: port 5(wlan0) entered forwarding state
RAW Paste Data Copied