Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ---<<BOOT>>---
- Copyright (c) 1992-2018 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 12.0-RELEASE-p3 GENERIC amd64
- FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1 )
- VT(vga): resolution 640x480
- CPU: Intel(R) Xeon(R) CPU W3670 @ 3.20GHz (3210.93-MHz K8-class CPU)
- Origin="GenuineIntel" Id=0x206c2 Family=0x6 Model=0x2c Stepping=2
- Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
- Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX1 6,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI>
- AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
- AMD Features2=0x1<LAHF>
- VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
- TSC: P-state invariant, performance statistics
- real memory = 12884901888 (12288 MB)
- avail memory = 12433403904 (11857 MB)
- Event timer "LAPIC" quality 600
- ACPI APIC Table: <080211 APIC1436>
- FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
- FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads
- random: unblocking device.
- ioapic1: Changing APIC ID to 7
- ioapic0 <Version 2.0> irqs 0-23 on motherboard
- ioapic1 <Version 2.0> irqs 24-47 on motherboard
- Launching APs: 1 11 3 6 10 2 9 7 8 5 4
- Timecounter "TSC-low" frequency 1605463454 Hz quality 1000
- random: entropy device external interface
- kbd1 at kbdmux0
- netmap: loaded module
- [ath_hal] loaded
- module_register_init: MOD_LOAD (vesa, 0xffffffff810f9770, 0) error 19
- nexus0
- vtvga0: <VT VGA driver> on motherboard
- cryptosoft0: <software crypto> on motherboard
- acpi0: <080211 XSDT1436> on motherboard
- acpi0: Power Button (fixed)
- cpu0: <ACPI CPU> on acpi0
- attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
- Timecounter "i8254" frequency 1193182 Hz quality 0
- Event timer "i8254" frequency 1193182 Hz quality 100
- atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
- atrtc0: registered as a time-of-day clock, resolution 1.000000s
- Event timer "RTC" frequency 32768 Hz quality 0
- hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
- Timecounter "HPET" frequency 14318180 Hz quality 950
- Event timer "HPET" frequency 14318180 Hz quality 350
- Event timer "HPET1" frequency 14318180 Hz quality 340
- Event timer "HPET2" frequency 14318180 Hz quality 340
- Event timer "HPET3" frequency 14318180 Hz quality 340
- Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
- acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
- pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
- pci0: <ACPI PCI bus> on pcib0
- pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
- pci1: <ACPI PCI bus> on pcib1
- ahci0: <Marvell 88SE912x AHCI SATA controller> port 0xac00-0xac07,0xa880-0xa883, 0xa800-0xa807,0xa480-0xa483,0xa400-0xa40f mem 0xf7eff800-0xf7efffff irq 28 at de vice 0.0 on pci1
- ahci0: AHCI v1.20 with 8 6Gbps ports, Port Multiplier not supported
- ahci0: quirks=0x900<NOBSYRES,ALTSIG>
- ahcich0: <AHCI channel> at channel 0 on ahci0
- ahcich1: <AHCI channel> at channel 1 on ahci0
- ahcich2: <AHCI channel> at channel 2 on ahci0
- ahcich3: <AHCI channel> at channel 3 on ahci0
- ahcich4: <AHCI channel> at channel 4 on ahci0
- ahcich5: <AHCI channel> at channel 5 on ahci0
- ahcich6: <AHCI channel> at channel 6 on ahci0
- ahcich7: <AHCI channel> at channel 7 on ahci0
- pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0
- pci2: <ACPI PCI bus> on pcib2
- xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xf7ffe000-0xf7ffffff irq 29 at de vice 0.0 on pci2
- xhci0: 32 bytes context size, 32-bit DMA
- xhci0: Unable to map MSI-X table
- usbus0 on xhci0
- usbus0: 5.0Gbps Super Speed USB v3.0
- pcib3: <ACPI PCI-PCI bridge> at device 3.0 on pci0
- pci3: <ACPI PCI bus> on pcib3
- vgapci0: <VGA-compatible display> port 0xbc00-0xbc7f mem 0xfa000000-0xfaffffff,0 xd0000000-0xdfffffff,0xf8000000-0xf9ffffff irq 24 at device 0.0 on pci3
- vgapci0: Boot video device
- pcib4: <ACPI PCI-PCI bridge> at device 7.0 on pci0
- pci4: <ACPI PCI bus> on pcib4
- ciss0: <HP Smart Array P410> port 0xc800-0xc8ff mem 0xfba00000-0xfbbfffff,0xfbcf f000-0xfbcfffff irq 30 at device 0.0 on pci4
- ciss0: PERFORMANT Transport
- pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached )
- pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached )
- pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached )
- pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached )
- uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0x9800-0x981f irq 16 at device 26.0 on pci0
- uhci0: LegSup = 0x2f00
- usbus1 on uhci0
- usbus1: 12Mbps Full Speed USB v1.0
- uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0x9880-0x989f irq 21 at device 26.1 on pci0
- uhci1: LegSup = 0x2f00
- usbus2 on uhci1
- usbus2: 12Mbps Full Speed USB v1.0
- uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0x9c00-0x9c1f irq 19 at device 26.2 on pci0
- uhci2: LegSup = 0x2f00
- usbus3 on uhci2
- usbus3: 12Mbps Full Speed USB v1.0
- ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xf7dff000-0xf7dff3f f irq 18 at device 26.7 on pci0
- usbus4: EHCI version 1.0
- usbus4 on ehci0
- usbus4: 480Mbps High Speed USB v2.0
- hdac0: <Intel 82801JI HDA Controller> mem 0xf7df8000-0xf7dfbfff irq 22 at device 27.0 on pci0
- pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
- pcib5: [GIANT-LOCKED]
- pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
- pcib6: [GIANT-LOCKED]
- pci5: <ACPI PCI bus> on pcib6
- atapci0: <JMicron JMB362 SATA300 controller> port 0xdc00-0xdc07,0xd880-0xd883,0x d800-0xd807,0xd480-0xd483,0xd400-0xd40f mem 0xfbdffc00-0xfbdffdff irq 16 at devi ce 0.0 on pci5
- ahci1: <JMicron JMB362 AHCI SATA controller> at channel -1 on atapci0
- ahci1: AHCI v1.10 with 2 3Gbps ports, Port Multiplier supported
- ahcich8: <AHCI channel> at channel 0 on ahci1
- ahcich9: <AHCI channel> at channel 1 on ahci1
- uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0x9080-0x909f irq 23 at device 29.0 on pci0
- uhci3: LegSup = 0x2f00
- usbus5 on uhci3
- usbus5: 12Mbps Full Speed USB v1.0
- uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0x9400-0x941f irq 19 at device 29.1 on pci0
- uhci4: LegSup = 0x2f00
- usbus6 on uhci4
- usbus6: 12Mbps Full Speed USB v1.0
- uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0x9480-0x949f irq 18 at device 29.2 on pci0
- uhci5: LegSup = 0x2f00
- usbus7 on uhci5
- usbus7: 12Mbps Full Speed USB v1.0
- ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xf7dfe000-0xf7dfe3f f irq 23 at device 29.7 on pci0
- usbus8: EHCI version 1.0
- usbus8 on ehci1
- usbus8: 480Mbps High Speed USB v2.0
- pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
- pci6: <ACPI PCI bus> on pcib7
- re0: <RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfbeffc00-0xfbeffcff irq 19 at device 1.0 on pci6
- re0: Chip rev. 0x18000000
- re0: MAC rev. 0x00000000
- miibus0: <MII bus> on re0
- rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
- rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX , 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX- master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
- re0: Using defaults for TSO: 65518/35/2048
- re0: Ethernet address: bc:ae:c5:29:6e:a6
- re0: netmap queues/slots: TX 1/256, RX 1/256
- pci6: <serial bus, FireWire> at device 2.0 (no driver attached)
- isab0: <PCI-ISA bridge> at device 31.0 on pci0
- isa0: <ISA bus> on isab0
- ahci2: <Intel ICH10 AHCI SATA controller> port 0x8c00-0x8c07,0x8880-0x8883,0x880 0-0x8807,0x8480-0x8483,0x8400-0x841f mem 0xf7dfc000-0xf7dfc7ff irq 20 at device 31.2 on pci0
- ahci2: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported
- ahcich10: <AHCI channel> at channel 0 on ahci2
- ahcich11: <AHCI channel> at channel 1 on ahci2
- ahcich12: <AHCI channel> at channel 2 on ahci2
- ahcich13: <AHCI channel> at channel 3 on ahci2
- ahcich14: <AHCI channel> at channel 4 on ahci2
- ahcich15: <AHCI channel> at channel 5 on ahci2
- ahciem0: <AHCI enclosure management bridge> on ahci2
- acpi_button0: <Power Button> on acpi0
- uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
- orm0: <ISA Option ROM> at iomem 0xd2800-0xd57ff pnpid ORM0000 on isa0
- atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
- atkbd0: <AT Keyboard> irq 1 on atkbdc0
- kbd0 at atkbd0
- atkbd0: [GIANT-LOCKED]
- atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
- est0: <Enhanced SpeedStep Frequency Control> on cpu0
- ZFS filesystem version: 5
- ZFS storage pool version: features support (5000)
- Timecounters tick every 1.000 msec
- hdacc0: <Realtek ALC892 HDA CODEC> at cad 0 on hdac0
- hdaa0: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc0
- pcm0: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hda a0
- pcm1: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa0
- pcm2: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa0
- pcm3: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa0
- ugen4.1: <Intel EHCI root HUB> at usbus4
- ugen2.1: <Intel UHCI root HUB> at usbus2
- ugen7.1: <Intel UHCI root HUB> at usbus7
- ugen5.1: <Intel UHCI root HUB> at usbus5
- ugen8.1: <Intel EHCI root HUB> at usbus8
- ugen3.1: <Intel UHCI root HUB> at usbus3
- ugen0.1: <0x1033 XHCI root HUB> at usbus0
- ugen1.1: <Intel UHCI root HUB> at usbus1
- ugen6.1: <Intel UHCI root HUB> at usbus6
- uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
- uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
- uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus8
- uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
- uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
- uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7
- uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
- uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
- uhub8: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
- uhub8: 4 ports with 4 removable, self powered
- uhub1: 2 ports with 2 removable, self powered
- uhub5: 2 ports with 2 removable, self powered
- uhub2: 2 ports with 2 removable, self powered
- uhub3: 2 ports with 2 removable, self powered
- uhub7: 2 ports with 2 removable, self powered
- uhub6: 2 ports with 2 removable, self powered
- ses0 at ahciem0 bus 0 scbus18 target 0 lun 0
- ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
- ses0: SEMB SES Device
- ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
- ada0: <ADATA SP600 6.8E> ACS-2 ATA SATA 3.x device
- ada0: Serial Number 2H1720017286
- ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
- ada0: Command Queueing enabled
- ada0: 122104MB (250069680 512 byte sectors)
- ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
- ada1: <ADATA SP600 6.8E> ACS-2 ATA SATA 3.x device
- ada1: Serial Number 2H1720016836
- ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
- ada1: Command Queueing enabled
- ada1: 122104MB (250069680 512 byte sectors)
- ada2 at ahcich15 bus 0 scbus17 target 0 lun 0
- ada2: <WDC WD3200AAJS-00L7A0 01.03E01> ATA8-ACS SATA 2.x device
- ada2: Serial Number WD-WCAV2M150885
- ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada2: Command Queueing enabled
- ada2: 305245MB (625142448 512 byte sectors)
- pass2 at ahcich7 bus 0 scbus7 target 0 lun 0
- pass2: <Marvell 91xx Config 1.01> Removable Processor SCSI device
- pass2: Serial Number HKDP221516WL
- pass2: 150.000MB/s transfers (SATA 1.x, UDMA4, ATAPI 12bytes, PIO 8192bytes)
- Trying to mount root from zfs:zroot/ROOT/default []...
- Root mount waiting for: usbus8 usbus4
- Root mount waiting for: usbus8 usbus4
- uhub0: 6 ports with 6 removable, self powered
- uhub4: 6 ports with 6 removable, self powered
- Root mount waiting for: usbus8 usbus4
- Setting hostuuid: 80c6001f-c600-0008-6277-bcaec5296ea6.
- Setting hostid: 0x53f3f903.
- Starting file system checks:
- Mounting local filesystems:.
- ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/m ysql /usr/local/lib/mysql/plugin /usr/local/lib/perl5/5.28/mach/CORE /usr/local/ lib/qt5 /usr/local/lib/samba4
- 32-bit compatibility ldconfig path: /usr/lib32
- Setting hostname: DDSERV.
- Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,M OUSE,KEYBOARD,ATTACH,CACHED
- Feeding entropy:
- ugen2.2: <CHICONY HP Basic USB Keyboard> at usbus2
- ukbd0 on uhub1
- ukbd0: <CHICONY HP Basic USB Keyboard, class 0/0, rev 1.10/3.00, addr 2> on usbu s2
- ugen7.2: <INNO TECH USB to Serial> at usbus7
- kbd2 at ukbd0
- .
- lo0: link state changed to UP
- re0: link state changed to UP
- re0: link state changed to DOWN
- Starting Network: lo0 re0.
- lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
- options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
- inet6 ::1 prefixlen 128
- inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
- inet 127.0.0.1 netmask 0xff000000
- groups: lo
- nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
- re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
- options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGI C,LINKSTATE>
- ether bc:ae:c5:29:6e:a6
- media: Ethernet autoselect (none)
- status: no carrier
- nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
- Starting devd.
- re0: link state changed to UP
- Configuring vt: keymap.
- Autoloading module: uhid.ko
- Starting dhclient.
- DHCPREQUEST on re0 to 255.255.255.255 port 67
- DHCPACK from 192.168.1.254
- bound to 192.168.1.72 -- renewal in 43200 seconds.
- Autoloading module: uhid.ko
- add host 127.0.0.1: gateway lo0 fib 0: route already in table
- add host ::1: gateway lo0 fib 0: route already in table
- add net fe80::: gateway ::1
- add net ff02::: gateway ::1
- add net ::ffff:0.0.0.0: gateway ::1
- add net ::0.0.0.0: gateway ::1
- Creating and/or trimming log files.
- Starting syslogd.
- Setting date via ntp.
- 17 Jun 17:50:47 ntpdate[721]: 94.16.115.123 rate limit response from server.
- 17 Jun 17:50:55 ntpdate[721]: step time server 89.109.251.22 offset -0.385725 se c
- Clearing /tmp (X related).
- Recovering vi editor sessions:.
- Updating motd:.
- Mounting late filesystems:.
- Starting ntpd.
- Starting powerd.
- Performing sanity check on Samba configuration: OK
- Starting nmbd.
- Starting smbd.
- Jun 17 17:50:56 DDSERV nmbd[904]: [2019/06/17 17:50:56.290548, 0] ../lib/util/b ecome_daemon.c:138(daemon_ready)
- Jun 17 17:50:56 DDSERV nmbd[904]: daemon_ready: STATUS=daemon 'nmbd' finished starting up and ready to serve connections
- Starting vboxwebsrv.
- Starting qbittorrent.
- Starting mysql.
- Jun 17 17:50:56 DDSERV smbd[908]: [2019/06/17 17:50:56.734758, 0] ../lib/util/b ecome_daemon.c:138(daemon_ready)
- Jun 17 17:50:56 DDSERV smbd[908]: daemon_ready: STATUS=daemon 'smbd' finished starting up and ready to serve connections
- Performing sanity check on sshd configuration.
- Starting sshd.
- Performing sanity check on apache24 configuration:
- Syntax OK
- Starting apache24.
- Configuring vt: keymap blanktime.
- Starting sendmail_submit.
- Starting sendmail_msp_queue.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
