API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Nov 16th, 2021
28
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.63 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Linux version 5.10.79 (matto@flatline) (mips-openwrt-linux-musl-gcc (OpenWrt GCC 11.2.0 r18096-53247d3cb4) 11.2.0, GNU ld (GNU Binutils) 2.37) 1
  2. [ 0.000000] RTL838X model is 0
  3. [ 0.000000] RTL839X model is 0
  4. [ 0.000000] RTL93XX model is 93030001
  5. [ 0.000000] SoC Type: DEFAULT
  6. [ 0.000000] Kernel command line: console=ttyS0,115200 init=/init mem=131008K ramoops.mem_address=0x7FF0000 ramoops.mem_size=65536 ramoops.ecc=1 ramoops.rec
  7. [ 0.000000] printk: bootconsole [early0] enabled
  8. [ 0.000000] CPU0 revision is: 00019555 (MIPS 34Kc)
  9. [ 0.000000] MIPS: machine is Zyxel XGS1210-12 Switch
  10. [ 0.000000] Initrd not found or empty - disabling initrd
  11. [ 0.000000] Using appended Device Tree.
  12. [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  13. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  14. [ 0.000000] Zone ranges:
  15. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
  16. [ 0.000000] Movable zone start for each node
  17. [ 0.000000] Early memory node ranges
  18. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
  19. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
  20. [ 0.000000] On node 0 totalpages: 32768
  21. [ 0.000000] Normal zone: 288 pages used for memmap
  22. [ 0.000000] Normal zone: 0 pages reserved
  23. [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
  24. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  25. [ 0.000000] pcpu-alloc: [0] 0
  26. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480
  27. [ 0.000000] Kernel command line: console=ttyS0,115200
  28. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
  29. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
  30. [ 0.000000] Writing ErrCtl register=000643e6
  31. [ 0.000000] Readback ErrCtl register=000643e6
  32. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  33. [ 0.000000] Memory: 114708K/131072K available (5528K kernel code, 614K rwdata, 1188K rodata, 7508K init, 203K bss, 16364K reserved, 0K cma-reserved)
  34. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  35. [ 0.000000] NR_IRQS: 256
  36. [ 0.000000] random: get_random_bytes called from start_kernel+0x31c/0x50c with crng_init=0
  37. [ 0.000000] rtl9300_timer_init: setting up timer
  38. [ 0.000000] Frequency in dts: 175000000, my rate is 87500000, period 1750000
  39. [ 0.000000] With base b8003200 IRQ: 8
  40. [ 0.000000] clocksource: timer: mask: 0xfffffff max_cycles: 0xfffffff, max_idle_ns: 1365186028 ns
  41. [ 0.000008] sched_clock: 28 bits at 87MHz, resolution 11ns, wraps every 1533916858ns
  42. [ 0.008442] CPU frequency from device tree: 800MHz
  43. [ 0.008471] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4778151116 ns
  44. [ 0.023355] sched_clock: 32 bits at 400MHz, resolution 2ns, wraps every 5368709118ns
  45. [ 0.031841] Calibrating delay loop... 1064.96 BogoMIPS (lpj=5324800)
  46. [ 0.115329] pid_max: default: 32768 minimum: 301
  47. [ 0.120510] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  48. [ 0.128372] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  49. [ 0.138991] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
  50. [ 0.149382] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  51. [ 0.160008] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
  52. [ 0.167516] pinctrl core: initialized pinctrl subsystem
  53. [ 0.173761] NET: Registered protocol family 16
  54. [ 0.221755] clocksource: Switched to clocksource MIPS
  55. [ 0.228352] NET: Registered protocol family 2
  56. [ 0.233262] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
  57. [ 0.241586] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
  58. [ 0.250724] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
  59. [ 0.258973] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
  60. [ 0.266627] TCP: Hash tables configured (established 1024 bind 1024)
  61. [ 0.273719] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
  62. [ 0.280771] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
  63. [ 0.288671] NET: Registered protocol family 1
  64. [ 0.445165] workingset: timestamp_bits=14 max_order=15 bucket_order=1
  65. [ 0.456171] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  66. [ 0.462437] jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  67. [ 0.513940] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
  68. [ 0.521844] printk: console [ttyS0] disabled
  69. [ 0.526485] 18002000.uart: ttyS0 at MMIO 0x18002000 (irq = 30, base_baud = 10937500) is a 16550A
  70. [ 0.536039] printk: console [ttyS0] enabled
  71. [ 0.536039] printk: console [ttyS0] enabled
  72. [ 0.545224] printk: bootconsole [early0] disabled
  73. [ 0.545224] printk: bootconsole [early0] disabled
  74. [ 0.776701] brd: module loaded
  75. [ 0.783703] spi-nor spi0.0: mx25l12805d (16384 Kbytes)
  76. [ 0.789549] 7 fixed-partitions partitions found on MTD device spi0.0
  77. [ 0.796614] Creating 7 MTD partitions on "spi0.0":
  78. [ 0.801937] 0x000000000000-0x000000040000 : "u-boot"
  79. [ 0.809734] 0x000000040000-0x000000050000 : "u-boot-env"
  80. [ 0.816687] 0x000000050000-0x000000060000 : "u-boot-env2"
  81. [ 0.825459] 0x000000060000-0x000000160000 : "jffs"
  82. [ 0.831817] 0x000000160000-0x000000260000 : "jffs2"
  83. [ 0.839997] 0x000000260000-0x000000930000 : "firmware"
  84. [ 0.852286] 0x000000930000-0x000001000000 : "runtime2"
  85. [ 0.863162] libphy: Fixed MDIO Bus: probed
  86. [ 0.869782] Probing RTL838X eth device pdev: 8146c400, dev: 8146c410
  87. [ 0.890708] Found SoC ID: 9303: DEFAULT, family 0
  88. [ 0.895944] SoC family fixup applied!
  89. [ 0.900005] rtl8380_init_mac
  90. [ 0.903212] Using MAC 000000e04c000000
  91. [ 0.908066] c45_mask: 00000000
  92. [ 0.911516] libphy: rtl930x-eth-mdio: probed
  93. [ 0.916335] mdio_bus mdio-bus: MDIO device at address 16 is missing.
  94. [ 0.923526] mdio_bus mdio-bus: MDIO device at address 17 is missing.
  95. [ 0.930729] mdio_bus mdio-bus: MDIO device at address 18 is missing.
  96. [ 0.937918] mdio_bus mdio-bus: MDIO device at address 19 is missing.
  97. [ 0.945114] mdio_bus mdio-bus: MDIO device at address 20 is missing.
  98. [ 0.952318] mdio_bus mdio-bus: MDIO device at address 21 is missing.
  99. [ 0.959506] mdio_bus mdio-bus: MDIO device at address 22 is missing.
  100. [ 0.966702] mdio_bus mdio-bus: MDIO device at address 23 is missing.
  101. [ 0.975484] NET: Registered protocol family 10
  102. [ 1.012136] Segment Routing with IPv6
  103. [ 1.016311] NET: Registered protocol family 17
  104. [ 1.021564] 8021q: 802.1Q VLAN Support v1.8
  105. [ 1.031570] libphy: rtl838x slave mii: probed
  106. [ 1.036494] CPU 0 Unable to handle kernel paging request at virtual address 00000010, epc == 80740adc, ra == 80740ac8
  107. [ 1.048282] Oops[#1]:
  108. [ 1.050804] CPU: 0 PID: 122 Comm: kworker/0:1 Not tainted 5.10.79 #0
  109. [ 1.057878] Workqueue: events deferred_probe_work_func
  110. [ 1.063585] $ 0 : 00000000 00000001 00000000 00000000
  111. [ 1.069394] $ 4 : 00000000 00000000 0000002f 00000001
  112. [ 1.075205] $ 8 : ffffefff 00000000 00000000 ffffffea
  113. [ 1.081017] $12 : 00000067 81523b24 00000067 8069f9a8
  114. [ 1.086826] $16 : 814ac080 00000000 00000000 80639dac
  115. [ 1.092637] $20 : 8063be6c 8062612c 80640000 80640000
  116. [ 1.098447] $24 : 00000018 80307380
  117. [ 1.104259] $28 : 81522000 81523cf8 806a0000 80740ac8
  118. [ 1.110069] Hi : 00000214
  119. [ 1.113254] Lo : 7beb0000
  120. [ 1.116458] epc : 80740adc rtl83xx_mdio_probe+0x29c/0x358
  121. [ 1.122641] ra : 80740ac8 rtl83xx_mdio_probe+0x288/0x358
  122. [ 1.128826] Status: 1100be03 KERNEL EXL IE
  123. [ 1.133478] Cause : 00800008 (ExcCode 02)
  124. [ 1.137927] BadVA : 00000010
  125. [ 1.141115] PrId : 00019555 (MIPS 34Kc)
  126. [ 1.145466] Modules linked in:
  127. [ 1.148860] Process kworker/0:1 (pid: 122, threadinfo=(ptrval), task=(ptrval), tls=00000000)
  128. [ 1.158228] Stack : 8146d000 824f6c00 80722864 8063be48 00000000 8146c610 8146c600 00000017
  129. [ 1.167532] 80eb0000 814ac080 8063cfb0 8146c610 8146c600 80e82078 80eb0000 00000001
  130. [ 1.176836] fffffffe 80740e9c 806298a4 8146d000 8151ef78 801f3d80 8146c610 80722864
  131. [ 1.186138] 00000000 8146c610 80722864 00000000 80eb0000 80722864 80eb0000 80319348
  132. [ 1.195443] 8146c610 00000000 00000000 80eb0000 80722864 8146c610 00000000 80317050
  133. [ 1.204747] ...
  134. [ 1.207461] Call Trace:
  135. [ 1.210178] [<80740adc>] rtl83xx_mdio_probe+0x29c/0x358
  136. [ 1.215984] [<80740e9c>] rtl83xx_sw_probe+0x304/0x724
  137. [ 1.221607] [<80319348>] platform_drv_probe+0x40/0x94
  138. [ 1.227214] [<80317050>] really_probe+0x108/0x4d8
  139. [ 1.232437] [<80314c5c>] bus_for_each_drv+0x70/0xb0
  140. [ 1.237854] [<80317624>] __device_attach+0xe4/0x15c
  141. [ 1.243277] [<80315f60>] bus_probe_device+0x9c/0xb8
  142. [ 1.248693] [<8031649c>] deferred_probe_work_func+0x90/0xd0
  143. [ 1.254888] [<8003f4e0>] process_one_work+0x1f0/0x460
  144. [ 1.260498] [<8003faa0>] worker_thread+0x350/0x5c4
  145. [ 1.265829] [<80045c0c>] kthread+0x13c/0x144
  146. [ 1.270576] [<80001bb8>] ret_from_kernel_thread+0x14/0x1c
  147. [ 1.276576]
  148. [ 1.278220] Code: 8e020760 00002825 00002025 <8c430010> 0060f809 8c460044 9602000a 34038380 1443000d
  149. [ 1.289077]
  150. [ 1.290767] ---[ end trace a5d5d2067987ce90 ]---
  151. [ 1.295893] Kernel panic - not syncing: Fatal exception
  152. [ 1.301697] Rebooting in 1 seconds..
  153. [ 3.302517] System restart.
  154. [ 3.305610] PLL control register: 0, applying reset value 0
  155. [ 5.308652] Reboot failed -- System halted
  156.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!