manfromnn

sml-482

Sep 27th, 2020
1,399
1 day
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. BCM97230B2 CFE v3.12 build 335, CFE core v3.28, Endian Mode: Little
  2. Build Date: Thu Apr 25 19:56:45 MSK 2013 (roman@ubuntu)
  3. Copyright (C) Broadcom Corporation.
  4.  
  5. Hit any key to stop autoboot:
  6. MACRONIX SPI flash detected: Size = 8MB, Sector Size 4096, Page Size 256
  7. Enabling NAND flash at CS2.
  8. BCHP_NAND_FLASH_DEVICE_ID =0xecda1095, BCHP_NAND_FLASH_DEVICE_ID_EXT = 0x44ecda10
  9. Auto configuring NAND @ CS2, with ECC LEVEL=1 & SPARE_AREA_SIZE=16
  10. INFO: Configuring LEDs for PCB rev. 5
  11. CPU speed:       742MHz
  12. Total memory(0): 512MB
  13. DDR Freq:        800 MHz
  14. DDR Mode:        DDR3
  15. DEV TECH:        2GBIT
  16. DDR Width:       16
  17. Boot Device:     SPI
  18. Total flash:     8MB
  19.  
  20. Initializing USB.
  21. USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
  22. Saving shmoo values...
  23. Saved shmoo values....
  24.  
  25. CFE initialized.
  26. Trying to start splash screen...
  27. No valid image found in flash0.splash - disabling splash
  28.  
  29. Executing STARTUP...
  30. Invalid command: "cls"
  31. Available commands: show_logo, gui, ts, erase, pvr, rvr, wvr, rr, wr, info, set, loop, reboot, dir, resetmac, macprog, macprog2, flash, memtest, t, f, e, d, u, uk, uc, batch, go, load, save, boot, ephycfg, ping, ifconfig, g, r, sleep, waitusb, show, testenv, incenv, unsetenv, printenv, setenv, help
  32.  
  33. Loader:elf Filesys:raw Dev:nandflash0.kernel File: Options:(null)
  34. Loading: prog_seg: 0x80001000/7873536 bss: 0x80783400/140896 Entry address is 0x80451ff0
  35. Starting program at 0x80451ff0
  36.  
  37. [    0.000000] Linux version 3.3.8-3.3 (root@runner-pa8yaqg3-project-122-concurrent-0) (gcc version 4.9.4 (GCC) ) #1 SMP Thu Jul 23 16:25:51 UTC 2020
  38. [    0.000000] Fetching vars from bootloader...
  39. [    0.000000] Serial number is "31D00885F64133101594"
  40. [    0.000000] Replacing flash type from NAND to SPI
  41. [    0.000000] found 16 vars.
  42. [    0.000000] Options: moca=0 sata=1 pcie=0 usb=1
  43. [    0.000000] Using 512 MB + 0 MB RAM (from CFE)
  44. [    0.000000] bootconsole [early0] enabled
  45. [    0.000000] CPU revision is: 0002a064 (Broadcom BMIPS4380)
  46. [    0.000000] FPU revision is: 00130001
  47. [    0.000000] Determined physical RAM map:
  48. [    0.000000]  memory: 10000000 @ 00000000 (usable)
  49. [    0.000000]  memory: 10000000 @ 20000000 (usable)
  50. [    0.000000] bmem: adding 160 MB RESERVED region at 64 MB (0x0a000000@0x04000000)
  51. [    0.000000] bmem: adding 224 MB RESERVED region at 512 MB (0x0e000000@0x20000000)
  52. [    0.000000] Initrd not found or empty - disabling initrd
  53. [    0.000000] Zone PFN ranges:
  54. [    0.000000]   Normal   0x00000000 -> 0x00030000
  55. [    0.000000] Movable zone start PFN for each node
  56. [    0.000000] Early memory PFN ranges
  57. [    0.000000]     0: 0x00000000 -> 0x00010000
  58. [    0.000000]     0: 0x00020000 -> 0x00030000
  59. [    0.000000] PERCPU: Embedded 7 pages/cpu @81606000 s5120 r8192 d15360 u32768
  60. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129536
  61. [    0.000000] Kernel command line: bmem=160M@64M bmem=224M@512M nandcs=2 panic=5
  62. [    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  63. [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  64. [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  65. [    0.000000] Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
  66. [    0.000000] Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
  67. [    0.000000] Memory: 116612k/524288k available (4513k kernel code, 407676k reserved, 1180k data, 1996k init, 0k highmem)
  68. [    0.000000] Hierarchical RCU implementation.
  69. [    0.000000] NR_IRQS:160
  70. [    0.000000] Measuring MIPS counter frequency...
  71. [    0.000000] Detected MIPS clock frequency: 742 MHz (371.255 MHz counter)
  72. [    0.000000] Console: colour dummy device 80x25
  73. [    0.001000] Calibrating delay loop... 741.37 BogoMIPS (lpj=370688)
  74. [    0.012000] pid_max: default: 32768 minimum: 301
  75. [    0.013000] Mount-cache hash table entries: 512
  76. [    0.015000] SMP: Booting CPU1...
  77. [    0.020000] CPU revision is: 0002a064 (Broadcom BMIPS4380)
  78. [    0.020000] FPU revision is: 00130001
  79. [    0.020000] Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
  80. [    0.020000] Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
  81. [    0.029000] SMP: CPU1 is running
  82. [    0.029000] Brought up 2 CPUs
  83. [    0.033000] NET: Registered protocol family 16
  84. [    0.035000] USB0: power enable is active high; overcurrent is active low
  85. [    0.036000] USB1: power enable is active high; overcurrent is active low
  86. [    0.053000] bio: create slab <bio-0> at 0
  87. [    0.055000] SCSI subsystem initialized
  88. [    0.056000] usbcore: registered new interface driver usbfs
  89. [    0.057000] usbcore: registered new interface driver hub
  90. [    0.058000] usbcore: registered new device driver usb
  91. [    0.060000] cfg80211: Calling CRDA to update world regulatory domain
  92. [    0.061000] Switching to clocksource wktmr
  93. [    0.077000] NET: Registered protocol family 2
  94. [    0.081000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  95. [    0.088000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  96. [    0.096000] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
  97. [    0.103000] TCP: Hash tables configured (established 16384 bind 16384)
  98. [    0.109000] TCP reno registered
  99. [    0.112000] UDP hash table entries: 256 (order: 1, 8192 bytes)
  100. [    0.118000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  101. [    0.125000] NET: Registered protocol family 1
  102. [    0.129000] RPC: Registered named UNIX socket transport module.
  103. [    0.135000] RPC: Registered udp transport module.
  104. [    0.140000] RPC: Registered tcp transport module.
  105. [    0.144000] RPC: Registered tcp NFSv4.1 backchannel transport module.
  106. [    0.169000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  107. [    0.175000] NTFS driver 2.1.30 [Flags: R/O].
  108. [    0.179000] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
  109. [    0.186000] fuse init (API version 7.18)
  110. [    0.189000] fuse init DCACHE_BUG workaround enabled
  111. [    0.195000] msgmni has been set to 227
  112. [    0.207000] io scheduler noop registered
  113. [    0.211000] io scheduler cfq registered (default)
  114. [    0.216000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  115. [    0.223000] serial8250.0: ttyS0 at MMIO 0x10406900 (irq = 65) is a 16550A
  116. [    0.230000] serial8250.0: ttyS1 at MMIO 0x10406940 (irq = 66) is a 16550A
  117. [    0.244000] console [ttyS2] enabled, bootconsole disabled 67) is a 16550A
  118. [    0.244000] console [ttyS2] enabled, bootconsole disabled
  119. [    0.265000] brd: module loaded
  120. [    0.274000] loop: module loaded
  121. [    0.278000] ahci: SSS flag set, parallel bus scan disabled
  122. [    0.294000] ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
  123. [    0.302000] ahci strict-ahci.0: flags: sntf stag clo slum part
  124. [    0.313000] scsi0 : ahci_platform
  125. [    0.317000] scsi1 : ahci_platform
  126. [    0.321000] ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 41
  127. [    0.329000] ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 41
  128. [    0.339000] brcmstb_nand: NAND controller driver is loaded
  129. [    0.347000] All hardware filters disabled
  130. [    0.451000] bcmgenet: configuring instance #0 for internal PHY
  131. [    0.477000] bcmgenet bcmgenet.0: eth0: link down
  132. [    0.484000] All hardware filters disabled
  133. [    0.642000] ata1: SATA link down (SStatus 0 SControl 300)
  134. [    0.808000] No PHY detected, not registering interface:1
  135. [    0.813000] bcmgenet: probe of bcmgenet.1 failed with error -5
  136. [    0.819000] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
  137. [    0.827000] usbcore: registered new interface driver pegasus
  138. [    0.833000] usbcore: registered new interface driver asix
  139. [    0.838000] usbcore: registered new interface driver cdc_ether
  140. [    0.844000] usbcore: registered new interface driver net1080
  141. [    0.850000] usbcore: registered new interface driver cdc_subset
  142. [    0.856000] usbcore: registered new interface driver zaurus
  143. [    0.862000] usbcore: registered new interface driver cdc_ncm
  144. [    0.868000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  145. [    0.875000] ehci-brcm ehci-brcm.0: Broadcom STB EHCI
  146. [    0.880000] ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
  147. [    0.919000] ehci-brcm ehci-brcm.0: irq 69, io mem 0x10480300
  148. [    0.930000] ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
  149. [    0.936000] hub 1-0:1.0: USB hub found
  150. [    0.940000] hub 1-0:1.0: 1 port detected
  151. [    0.944000] ehci-brcm ehci-brcm.1: Broadcom STB EHCI
  152. [    0.950000] ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
  153. [    0.952000] ata2: SATA link down (SStatus 0 SControl 300)
  154. [    0.994000] ehci-brcm ehci-brcm.1: irq 70, io mem 0x10480500
  155. [    1.005000] ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
  156. [    1.011000] hub 2-0:1.0: USB hub found
  157. [    1.015000] hub 2-0:1.0: 1 port detected
  158. [    1.019000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  159. [    1.026000] ohci-brcm ohci-brcm.0: Broadcom STB OHCI
  160. [    1.031000] ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 3
  161. [    1.039000] ohci-brcm ohci-brcm.0: irq 71, io mem 0x10480400
  162. [    1.109000] hub 3-0:1.0: USB hub found
  163. [    1.113000] hub 3-0:1.0: 1 port detected
  164. [    1.118000] ohci-brcm ohci-brcm.1: Broadcom STB OHCI
  165. [    1.123000] ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 4
  166. [    1.130000] ohci-brcm ohci-brcm.1: irq 72, io mem 0x10480600
  167. [    1.201000] hub 4-0:1.0: USB hub found
  168. [    1.205000] hub 4-0:1.0: 1 port detected
  169. [    1.210000] Initializing USB Mass Storage driver...
  170. [    1.215000] usbcore: registered new interface driver usb-storage
  171. [    1.221000] USB Mass Storage support registered.
  172. [    1.226000] mousedev: PS/2 mouse device common for all mice
  173. [    1.232000] lirc_dev: IR Remote Control driver registered, major 253
  174. [    1.238000] IR LIRC bridge handler initialized
  175. [    1.243000] sdhci: Secure Digital Host Controller Interface driver
  176. [    1.249000] sdhci: Copyright(c) Pierre Ossman
  177. [    1.254000] sdhci-pltfm: SDHCI platform and OF driver helper
  178. [    1.259000] sdhci-brcmstb sdhci-brcmstb.0: Enabling controller
  179. [    1.268000] mmc0: SDHCI controller on sdhci-brcmstb.0 [sdhci-brcmstb.0] using ADMA
  180. [    1.276000] usbcore: registered new interface driver usbhid
  181. [    1.282000] usbhid: USB HID core driver
  182. [    1.286000] TCP cubic registered
  183. [    1.289000] NET: Registered protocol family 17
  184. [    1.294000] PM: CP0 COUNT/COMPARE frequency does not depend on divisor
  185. [    1.303000] EBI CS0: setting up SPI flash (primary)
  186. [    1.308000] spi_brcmstb spi_brcmstb.0: 1-lane output, 3-byte address
  187. [    1.315000] m25p80 spi0.0: found mx25l6405d, expected m25p80
  188. [    1.321000] m25p80 spi0.0: mx25l6405d (8192 Kbytes)
  189. [    1.346000] Creating 8 MTD partitions on "spi0.0":
  190. [    1.351000] 0x000000000000-0x000000100000 : "bootldr"
  191. [    1.359000] 0x000000100000-0x000000110000 : "macadr"
  192. [    1.365000] 0x000000110000-0x000000120000 : "nvram"
  193. [    1.372000] 0x000000120000-0x000000180000 : "branding"
  194. [    1.381000] 0x000000180000-0x000000200000 : "splash"
  195. [    1.387000] 0x000000200000-0x000000600000 : "ro_kernel"
  196. [    1.393000] 0x000000600000-0x000000610000 : "env"
  197. [    1.399000] 0x000000610000-0x000000800000 : "bsec"
  198. [    1.405000] EBI CS2: setting up NAND flash
  199. [    1.408000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)
  200. [    1.419000] brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4
  201. [    1.419000]
  202. [    1.429000] Bad block table found at page 131008, version 0x01
  203. [    1.436000] Bad block table found at page 130944, version 0x01
  204. [    1.469000] Creating 3 MTD partitions on "brcmnand.0":
  205. [    1.475000] 0x000000000000-0x000000800000 : "kernel"
  206. [    1.481000] 0x000000800000-0x000001000000 : "backup_kernel"
  207. [    1.488000] 0x000001000000-0x000010000000 : "raw"
  208.  
  209. [    1.499000] Freeing unused kernel memory: 1996k freed
  210. [    1.683000] brcmfb: addr = 0xac800000 offset = 0x0
  211. [    1.689000] fb0: Broadcom frame buffer device
  212. Try to attach UBI ...
  213. [    1.734000] UBI: attaching mtd10 to ubi0
  214. [    1.738000] UBI: physical eraseblock size:   131072 bytes (128 KiB)
  215. [    1.744000] UBI: logical eraseblock size:    126976 bytes
  216. [    1.749000] UBI: smallest flash I/O unit:    2048
  217. [    1.754000] UBI: VID header offset:          2048 (aligned 2048)
  218. [    1.760000] UBI: data offset:                4096
  219.  
  220. (none) login: [    3.264000] UBI: max. sequence number:       37729
  221. [    3.289000] UBI: attached mtd10 to ubi0
  222. [    3.293000] UBI: MTD device name:            "raw"
  223. [    3.298000] UBI: MTD device size:            240 MiB
  224. [    3.303000] UBI: number of good PEBs:        1916
  225. [    3.308000] UBI: number of bad PEBs:         4
  226. [    3.312000] UBI: number of corrupted PEBs:   0
  227. [    3.317000] UBI: max. allowed volumes:       128
  228. [    3.322000] UBI: wear-leveling threshold:    4096
  229. [    3.326000] UBI: number of internal volumes: 1
  230. [    3.331000] UBI: number of user volumes:     2
  231. [    3.336000] UBI: available PEBs:             42
  232. [    3.340000] UBI: total number of reserved PEBs: 1874
  233. [    3.345000] UBI: number of PEBs reserved for bad PEB handling: 19
  234. [    3.351000] UBI: max/mean erase counter: 25/19
  235. [    3.356000] UBI: image sequence number:  1320996868
  236. [    3.361000] UBI: background thread "ubi_bgt0d" started, PID 513
  237. UBI was attached.
  238. [    3.461000] UBIFS: recovery needed
  239. [    3.596000] UBIFS: recovery completed
  240. [    3.600000] UBIFS: mounted UBI device 0, volume 1, name "persistentfs"
  241. [    3.607000] UBIFS: file system size:   133070848 bytes (129952 KiB, 126 MiB, 1048 LEBs)
  242. [    3.615000] UBIFS: journal size:       6602752 bytes (6448 KiB, 6 MiB, 52 LEBs)
  243. [    3.622000] UBIFS: media format:       w4/r0 (latest is w4/r0)
  244. [    3.628000] UBIFS: default compressor: lzo
  245. [    3.632000] UBIFS: reserved for root:  4952683 bytes (4836 KiB)
  246. Mount rootfs: squashfs from /dev/mtdblock11 to /mnt
  247. rootfs /dev/mtdblock11 mount successful
  248. Fastboot enabled
  249. Framebuffer custom resolution 0x0 incorrect
  250. Current framebuffer size is 720x576
  251. Sun Jan  1 01:01:00 UTC 2017
  252. deviceinfo:
  253. mac addr  : E4:27:71:41:32:00
  254. serial num: 31D00885F64133101594
  255. board name: SML-482
  256. hw rev    : 0
  257. features  : cvbs hdmi spdif
  258. board     : sml723x
  259. family    : bcm97230
  260. S/N:31D00885F64133101594 MAC:E4:27:71:41:32:00 FW:7.18.38
  261. Setup networking...
  262. [    3.916000] bcmgenet bcmgenet.0: eth0: link up, 100 Mbps, full duplex
  263. [    3.996000] bcmgenet bcmgenet.0: eth0: link down
  264. Initial network configuration:
  265. 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue
  266.     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
  267.     inet 127.0.0.1/8 scope host lo
  268. 2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
  269.     link/ether e4:27:71:41:32:00 brd ff:ff:ff:ff:ff:ff
  270. Skip DHCP setup for fastboot
  271. Wait for USB devices...
  272. [    5.606000] bcmgenet bcmgenet.0: eth0: link up, 100 Mbps, full duplex
  273. No USB storages found.
  274. Remove address on eth0
  275. Start STB application.
  276. The system is going down NOW!
  277. Sent SIGTERM to all processes
  278. Sent SIGKILL to all processes
  279. vm.min_free_kbytes = 8192
  280. vm.overcommit_memory = 1
  281. net.ipv4.conf.all.force_igmp_version = 2
  282. Starting syslogd ...
  283.  
  284. SML-482 login: [   11.275000] nexus: module license 'Proprietary' taints kernel.
  285. [   11.281000] Disabling lock debugging due to kernel taint
  286. [   11.396000] nexus driver initialized
  287. [   12.143000] ### Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/../magnum/portinginterface/hdm/src/common/bhdm_edid.c:4264
  288. [   13.456000] RTL871X: module init start
  289. [   13.460000] RTL871X: rtl8188eu v4.3.0.8_13968.20150417
  290. [   13.465000] RTL871X: build time: Jul 23 2020 16:07:06
  291. [   13.471000] usbcore: registered new interface driver rtl8188eu
  292. [   13.477000] RTL871X: module init ret=0
  293. [   13.901000] usbcore: registered new interface driver rtl8192eu
  294. [   14.086000] rtw driver version=v2.0.939.20100726
  295. [   14.094000] usbcore: registered new interface driver rtw_usb_drv
  296. [   14.283000] rtusb init rt2870 --->
  297. [   14.288000] usbcore: registered new interface driver rt2870
  298. 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue
  299.     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
  300.     inet 127.0.0.1/8 scope host lo
  301. 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
  302.     link/ether e4:27:71:41:32:00 brd ff:ff:ff:ff:ff:ff
  303.     inet 192.168.0.143/24 brd 192.168.0.255 scope global eth0
  304. [   18.922000] ### Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/../magnum/portinginterface/hdm/src/common/bhdm_edid.c:4264
  305. [   19.984000] ### Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/../magnum/portinginterface/hdm/src/common/bhdm_edid.c:4264
  306. [   20.000000] !!!Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/modules/display/src/nexus_display.c:870
  307. [   20.013000] !!!Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/modules/display/src/nexus_display.c:939
  308. [   20.048000] ### Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/../magnum/portinginterface/hdm/src/common/bhdm_edid.c:4264
  309. [   20.062000] ### Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/modules/display/src/nexus_display.c:1722
  310. [   20.075000] !!!Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/modules/display/src/nexus_display.c:1723
  311. [   20.087000] !!!Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/modules/display/src/nexus_display.c:870
  312. [   20.099000] !!!Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/modules/display/src/nexus_display.c:939
  313. [   20.126000] ### Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/../magnum/portinginterface/hdm/src/common/bhdm_edid.c:4264
  314. [   20.156000] !!!Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/modules/display/src/nexus_display.c:870
  315. [   20.168000] !!!Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/modules/display/src/nexus_display.c:939
  316. [   20.187000] !!!Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/modules/display/src/nexus_display.c:870
  317. [   20.199000] !!!Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/modules/display/src/nexus_display.c:939
  318. [   33.373000] Restarting system.
  319.  
  320. BCM72300012
  321. x
  322. AVS 0.5.5
  323. B1
  324. PV=0000031D
  325. PV=00000330
  326. MV=000003B5
  327.  
  328. M0
  329. SHMOO VER 1.14
  330. MCB
  331.  
  332. PKID 20121012 003B6000 003B0000 041B103F 00001C00
  333.  
  334. S300001A7
  335. 00000D80
  336. +00000004
  337. RDLY W0 00000004
  338.  
  339. RDEN W0 00000022
  340.  
  341. RDQS W0
  342.  
  343.     0000000000111111111122222222223333333333444444444455555555556666
  344.     0123456789012345678901234567890123456789012345678901234567890123
  345.  00 ----------+-++++++++++++++++++X+++++++++++++++++----------------
  346.  01 -------++++++++++++++++++X+++++++++++++++++---------------------
  347.  02 ------------++++++++++++++++++X++++++++++++++++++---------------
  348.  03 ------------+++++++++++++++++X+++++++++++++++++-----------------
  349.  04 -----+-+++++++++++++++++X+++++++++++++++++----------------------
  350.  05 ----+++++++++++++++++++X++++++++++++++++++----------------------
  351.  06 ------+++++++++++++++++X+++++++++++++++++-----------------------
  352.  07 ----------+++++++++++++++++X+++++++++++++++++-------------------
  353.  08 -------++++++++++++++++X++++++++++++++++------------------------
  354.  09 ----------+++++++++++++++++X++++++++++++++++--------------------
  355.  10 ----------+++++++++++++++++X++++++++++++++++--------------------
  356.  11 ---------+++++++++++++++++X+++++++++++++++++--------------------
  357.  12 ---+--+++++++++++++++++X++++++++++++++++------------------------
  358.  13 --+++++++++++++++++X+++++++++++++++++---------------------------
  359.  14 --+--++++++++++++++++X++++++++++++++++--------------------------
  360.  15 ---------+++++++++++++++++X++++++++++++++++---------------------
  361.  
  362.  
  363. P W0
  364.  
  365.     0000000000111111111122222222223333333333444444444455555555556666
  366.     0123456789012345678901234567890123456789012345678901234567890123
  367.  00 -------+-+++++++++++++++++++X+++++++++++++++++++----------------
  368.  01 ----+++++++++++++++++++X+++++++++++++++++++---------------------
  369.  02 -------+++++++++++++++++++++X++++++++++++++++++++---------------
  370.  03 ---------+++++++++++++++++++X++++++++++++++++++-----------------
  371.  04 +-++++++++++++++++++++X+++++++++++++++++++----------------------
  372.  05 +--++++++++++++++++++++X+++++++++++++++++++---------------------
  373.  06 ---+++++++++++++++++++X+++++++++++++++++++----------------------
  374.  07 -----+-+++++++++++++++++++X++++++++++++++++++-------------------
  375.  08 -----+-++++++++++++++++++X++++++++++++++++++--------------------
  376.  09 -----+--++++++++++++++++++X+++++++++++++++++--------------------
  377.  10 --------++++++++++++++++++X++++++++++++++++++-------------------
  378.  11 --------++++++++++++++++++X++++++++++++++++++-------------------
  379.  12 --+++++++++++++++++++X+++++++++++++++++++-----------------------
  380.  13 --+++++++++++++++++++X++++++++++++++++++------------------------
  381.  14 --+++++++++++++++++++X+++++++++++++++++++-----------------------
  382.  15 ------++++++++++++++++++X++++++++++++++++++---------------------
  383.  
  384.  
  385. N W0
  386.  
  387.     0000000000111111111122222222223333333333444444444455555555556666
  388.     0123456789012345678901234567890123456789012345678901234567890123
  389.  00 ----------++++++++++++++++++++X++++++++++++++++++++-------------
  390.  01 -------+-++++++++++++++++++X+++++++++++++++++-------------------
  391.  02 ----------+++++++++++++++++++++X++++++++++++++++++++------------
  392.  03 ----------+++++++++++++++++++++X++++++++++++++++++++------------
  393.  04 -----+-++++++++++++++++++X+++++++++++++++++---------------------
  394.  05 -----+++++++++++++++++++X+++++++++++++++++++--------------------
  395.  06 -----++++++++++++++++++X++++++++++++++++++----------------------
  396.  07 --------+-+++++++++++++++++++X+++++++++++++++++++---------------
  397.  08 ------+-++++++++++++++++X+++++++++++++++------------------------
  398.  09 --------++++++++++++++++++X+++++++++++++++++--------------------
  399.  10 --------+-+++++++++++++++++X++++++++++++++++--------------------
  400.  11 --------+-+++++++++++++++++X++++++++++++++++--------------------
  401.  12 ----+-+++++++++++++++++X++++++++++++++++------------------------
  402.  13 --+-++++++++++++++++X++++++++++++++++---------------------------
  403.  14 ----+++++++++++++++++X+++++++++++++++++-------------------------
  404.  15 ---------+++++++++++++++++X+++++++++++++++++--------------------
  405.  
  406.  
  407. WRDQ W0
  408.  
  409.     0000000000111111111122222222223333333333444444444455555555556666
  410.     0123456789012345678901234567890123456789012345678901234567890123
  411.  00 +++++++++++++++++X++++++++++++++++--------------++++++++++++++++
  412.  01 +++++++++++++++X+++++++++++++++-----------------++++++++++++++++
  413.  02 +++++++++++++++++X++++++++++++++++--------------++++++++++++++++
  414.  03 +++++++++++++++++X+++++++++++++++++------------+++++++++++++++++
  415.  04 +++++++++++++++X+++++++++++++++----------------+++++++++++++++++
  416.  05 ++++++++++++++++X++++++++++++++++--------------+++++++++++++++++
  417.  06 +++++++++++++++X+++++++++++++++-----------------++++++++++++++++
  418.  07 +++++++++++++++++X+++++++++++++++++------------+++++++++++++++++
  419.  08 +++++++++++++++X+++++++++++++++-----------------++++++++++++++++
  420.  09 +++++++++++++++++X++++++++++++++++-------------+-+++++++++++++++
  421.  10 +++++++++++++++++X+++++++++++++++++------------+++++++++++++++++
  422.  11 ++++++++++++++++X++++++++++++++++-----------------++++++++++++++
  423.  12 +++++++++++++++X+++++++++++++++----------------+++++++++++++++++
  424.  13 ++++++++++++++X++++++++++++++------------------+++++++++++++++++
  425.  14 ++++++++++++++++X+++++++++++++++---------------+++++++++++++++++
  426.  15 ++++++++++++++++X+++++++++++++++----------------++++++++++++++++
  427.  
  428.  
  429. WRDM W0 00000010
  430. WRDM W0 0000000F
  431.  
  432.  
  433. ADDR
  434.  
  435.     0000000000111111111122222222223333333333444444444455555555556666
  436.     0123456789012345678901234567890123456789012345678901234567890123
  437.  00 ++++++++++++++++++++++++++S++X+++++++++++++++++++++++++++++-----
  438.  
  439. CZ#@SG
  440.  
  441. BCM97230B2 CFE v3.12 build 335, CFE core v3.28, Endian Mode: Little
  442. Build Date: Thu Apr 25 19:56:45 MSK 2013 (roman@ubuntu)
  443. Copyright (C) Broadcom Corporation.
  444.  
  445. Hit any key to stop autoboot:
  446. MACRONIX SPI flash detected: Size = 8MB, Sector Size 4096, Page Size 256
  447. Enabling NAND flash at CS2.
  448. BCHP_NAND_FLASH_DEVICE_ID =0xecda1095, BCHP_NAND_FLASH_DEVICE_ID_EXT = 0x44ecda10
  449. Auto configuring NAND @ CS2, with ECC LEVEL=1 & SPARE_AREA_SIZE=16
  450. INFO: Configuring LEDs for PCB rev. 5
  451. CPU speed:       742MHz
  452. Total memory(0): 512MB
  453. DDR Freq:        800 MHz
  454. DDR Mode:        DDR3
  455. DEV TECH:        2GBIT
  456. DDR Width:       16
  457. Boot Device:     SPI
  458. Total flash:     8MB
  459.  
  460. Initializing USB.
  461. USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
  462. Saving shmoo values...
  463. Saved shmoo values....
  464.  
  465. CFE initialized.
  466. Trying to start splash screen...
  467. No valid image found in flash0.splash - disabling splash
  468.  
  469. Executing STARTUP...
  470. Invalid command: "cls"
  471. Available commands: show_logo, gui, ts, erase, pvr, rvr, wvr, rr, wr, info, set, loop, reboot, dir, resetmac, macprog, macprog2, flash, memtest, t, f, e, d, u, uk, uc, batch, go, load, save, boot, ephycfg, ping, ifconfig, g, r, sleep, waitusb, show, testenv, incenv, unsetenv, printenv, setenv, help
  472.  
  473. Loader:elf Filesys:raw Dev:nandflash0.kernel File: Options:(null)
  474. Loading: prog_seg: 0x80001000/7873536 bss: 0x80783400/140896 Entry address is 0x80451ff0
  475. Starting program at 0x80451ff0
  476.  
  477. [    0.000000] Linux version 3.3.8-3.3 (root@runner-pa8yaqg3-project-122-concurrent-0) (gcc version 4.9.4 (GCC) ) #1 SMP Thu Jul 23 16:25:51 UTC 2020
  478. [    0.000000] Fetching vars from bootloader...
  479. [    0.000000] Serial number is "31D00885F64133101594"
  480. [    0.000000] Replacing flash type from NAND to SPI
  481. [    0.000000] found 16 vars.
  482. [    0.000000] Options: moca=0 sata=1 pcie=0 usb=1
  483. [    0.000000] Using 512 MB + 0 MB RAM (from CFE)
  484. [    0.000000] bootconsole [early0] enabled
  485. [    0.000000] CPU revision is: 0002a064 (Broadcom BMIPS4380)
  486. [    0.000000] FPU revision is: 00130001
  487. [    0.000000] Determined physical RAM map:
  488. [    0.000000]  memory: 10000000 @ 00000000 (usable)
  489. [    0.000000]  memory: 10000000 @ 20000000 (usable)
  490. [    0.000000] bmem: adding 160 MB RESERVED region at 64 MB (0x0a000000@0x04000000)
  491. [    0.000000] bmem: adding 224 MB RESERVED region at 512 MB (0x0e000000@0x20000000)
  492. [    0.000000] Initrd not found or empty - disabling initrd
  493. [    0.000000] Zone PFN ranges:
  494. [    0.000000]   Normal   0x00000000 -> 0x00030000
  495. [    0.000000] Movable zone start PFN for each node
  496. [    0.000000] Early memory PFN ranges
  497. [    0.000000]     0: 0x00000000 -> 0x00010000
  498. [    0.000000]     0: 0x00020000 -> 0x00030000
  499. [    0.000000] PERCPU: Embedded 7 pages/cpu @81606000 s5120 r8192 d15360 u32768
  500. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129536
  501. [    0.000000] Kernel command line: bmem=160M@64M bmem=224M@512M nandcs=2 panic=5
  502. [    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  503. [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  504. [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  505. [    0.000000] Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
  506. [    0.000000] Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
  507. [    0.000000] Memory: 116612k/524288k available (4513k kernel code, 407676k reserved, 1180k data, 1996k init, 0k highmem)
  508. [    0.000000] Hierarchical RCU implementation.
  509. [    0.000000] NR_IRQS:160
  510. [    0.000000] Measuring MIPS counter frequency...
  511. [    0.000000] Detected MIPS clock frequency: 742 MHz (371.255 MHz counter)
  512. [    0.000000] Console: colour dummy device 80x25
  513. [    0.001000] Calibrating delay loop... 741.37 BogoMIPS (lpj=370688)
  514. [    0.012000] pid_max: default: 32768 minimum: 301
  515. [    0.013000] Mount-cache hash table entries: 512
  516. [    0.015000] SMP: Booting CPU1...
  517. [    0.020000] CPU revision is: 0002a064 (Broadcom BMIPS4380)
  518. [    0.020000] FPU revision is: 00130001
  519. [    0.020000] Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
  520. [    0.020000] Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
  521. [    0.029000] SMP: CPU1 is running
  522. [    0.029000] Brought up 2 CPUs
  523. [    0.033000] NET: Registered protocol family 16
  524. [    0.035000] USB0: power enable is active high; overcurrent is active low
  525. [    0.036000] USB1: power enable is active high; overcurrent is active low
  526. [    0.053000] bio: create slab <bio-0> at 0
  527. [    0.055000] SCSI subsystem initialized
  528. [    0.056000] usbcore: registered new interface driver usbfs
  529. [    0.057000] usbcore: registered new interface driver hub
  530. [    0.058000] usbcore: registered new device driver usb
  531. [    0.060000] cfg80211: Calling CRDA to update world regulatory domain
  532. [    0.061000] Switching to clocksource wktmr
  533. [    0.077000] NET: Registered protocol family 2
  534. [    0.081000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  535. [    0.088000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  536. [    0.096000] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
  537. [    0.103000] TCP: Hash tables configured (established 16384 bind 16384)
  538. [    0.109000] TCP reno registered
  539. [    0.112000] UDP hash table entries: 256 (order: 1, 8192 bytes)
  540. [    0.118000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  541. [    0.125000] NET: Registered protocol family 1
  542. [    0.129000] RPC: Registered named UNIX socket transport module.
  543. [    0.135000] RPC: Registered udp transport module.
  544. [    0.140000] RPC: Registered tcp transport module.
  545. [    0.144000] RPC: Registered tcp NFSv4.1 backchannel transport module.
  546. [    0.168000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  547. [    0.175000] NTFS driver 2.1.30 [Flags: R/O].
  548. [    0.179000] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
  549. [    0.185000] fuse init (API version 7.18)
  550. [    0.189000] fuse init DCACHE_BUG workaround enabled
  551. [    0.194000] msgmni has been set to 227
  552. [    0.207000] io scheduler noop registered
  553. [    0.211000] io scheduler cfq registered (default)
  554. [    0.216000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  555. [    0.223000] serial8250.0: ttyS0 at MMIO 0x10406900 (irq = 65) is a 16550A
  556. [    0.230000] serial8250.0: ttyS1 at MMIO 0x10406940 (irq = 66) is a 16550A
  557. [    0.244000] console [ttyS2] enabled, bootconsole disabled 67) is a 16550A
  558. [    0.244000] console [ttyS2] enabled, bootconsole disabled
  559. [    0.265000] brd: module loaded
  560. [    0.273000] loop: module loaded
  561. [    0.277000] ahci: SSS flag set, parallel bus scan disabled
  562. [    0.294000] ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
  563. [    0.302000] ahci strict-ahci.0: flags: sntf stag clo slum part
  564. [    0.313000] scsi0 : ahci_platform
  565. [    0.317000] scsi1 : ahci_platform
  566. [    0.321000] ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 41
  567. [    0.329000] ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 41
  568. [    0.339000] brcmstb_nand: NAND controller driver is loaded
  569. [    0.347000] All hardware filters disabled
  570. [    0.451000] bcmgenet: configuring instance #0 for internal PHY
  571. [    0.477000] bcmgenet bcmgenet.0: eth0: link down
  572. [    0.484000] All hardware filters disabled
  573. [    0.642000] ata1: SATA link down (SStatus 0 SControl 300)
  574. [    0.808000] No PHY detected, not registering interface:1
  575. [    0.813000] bcmgenet: probe of bcmgenet.1 failed with error -5
  576. [    0.819000] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
  577. [    0.827000] usbcore: registered new interface driver pegasus
  578. [    0.833000] usbcore: registered new interface driver asix
  579. [    0.838000] usbcore: registered new interface driver cdc_ether
  580. [    0.844000] usbcore: registered new interface driver net1080
  581. [    0.850000] usbcore: registered new interface driver cdc_subset
  582. [    0.856000] usbcore: registered new interface driver zaurus
  583. [    0.862000] usbcore: registered new interface driver cdc_ncm
  584. [    0.868000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  585. [    0.875000] ehci-brcm ehci-brcm.0: Broadcom STB EHCI
  586. [    0.880000] ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
  587. [    0.919000] ehci-brcm ehci-brcm.0: irq 69, io mem 0x10480300
  588. [    0.930000] ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
  589. [    0.936000] hub 1-0:1.0: USB hub found
  590. [    0.940000] hub 1-0:1.0: 1 port detected
  591. [    0.944000] ehci-brcm ehci-brcm.1: Broadcom STB EHCI
  592. [    0.950000] ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
  593. [    0.952000] ata2: SATA link down (SStatus 0 SControl 300)
  594. [    0.994000] ehci-brcm ehci-brcm.1: irq 70, io mem 0x10480500
  595. [    1.005000] ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
  596. [    1.011000] hub 2-0:1.0: USB hub found
  597. [    1.015000] hub 2-0:1.0: 1 port detected
  598. [    1.019000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  599. [    1.026000] ohci-brcm ohci-brcm.0: Broadcom STB OHCI
  600. [    1.031000] ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 3
  601. [    1.039000] ohci-brcm ohci-brcm.0: irq 71, io mem 0x10480400
  602. [    1.109000] hub 3-0:1.0: USB hub found
  603. [    1.113000] hub 3-0:1.0: 1 port detected
  604. [    1.117000] ohci-brcm ohci-brcm.1: Broadcom STB OHCI
  605. [    1.123000] ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 4
  606. [    1.130000] ohci-brcm ohci-brcm.1: irq 72, io mem 0x10480600
  607. [    1.201000] hub 4-0:1.0: USB hub found
  608. [    1.205000] hub 4-0:1.0: 1 port detected
  609. [    1.210000] Initializing USB Mass Storage driver...
  610. [    1.215000] usbcore: registered new interface driver usb-storage
  611. [    1.221000] USB Mass Storage support registered.
  612. [    1.226000] mousedev: PS/2 mouse device common for all mice
  613. [    1.232000] lirc_dev: IR Remote Control driver registered, major 253
  614. [    1.238000] IR LIRC bridge handler initialized
  615. [    1.243000] sdhci: Secure Digital Host Controller Interface driver
  616. [    1.249000] sdhci: Copyright(c) Pierre Ossman
  617. [    1.254000] sdhci-pltfm: SDHCI platform and OF driver helper
  618. [    1.259000] sdhci-brcmstb sdhci-brcmstb.0: Enabling controller
  619. [    1.268000] mmc0: SDHCI controller on sdhci-brcmstb.0 [sdhci-brcmstb.0] using ADMA
  620. [    1.276000] usbcore: registered new interface driver usbhid
  621. [    1.282000] usbhid: USB HID core driver
  622. [    1.286000] TCP cubic registered
  623. [    1.289000] NET: Registered protocol family 17
  624. [    1.294000] PM: CP0 COUNT/COMPARE frequency does not depend on divisor
  625. [    1.303000] EBI CS0: setting up SPI flash (primary)
  626. [    1.308000] spi_brcmstb spi_brcmstb.0: 1-lane output, 3-byte address
  627. [    1.315000] m25p80 spi0.0: found mx25l6405d, expected m25p80
  628. [    1.321000] m25p80 spi0.0: mx25l6405d (8192 Kbytes)
  629. [    1.346000] Creating 8 MTD partitions on "spi0.0":
  630. [    1.351000] 0x000000000000-0x000000100000 : "bootldr"
  631. [    1.357000] 0x000000100000-0x000000110000 : "macadr"
  632. [    1.363000] 0x000000110000-0x000000120000 : "nvram"
  633. [    1.370000] 0x000000120000-0x000000180000 : "branding"
  634. [    1.380000] 0x000000180000-0x000000200000 : "splash"
  635. [    1.386000] 0x000000200000-0x000000600000 : "ro_kernel"
  636. [    1.393000] 0x000000600000-0x000000610000 : "env"
  637. [    1.399000] 0x000000610000-0x000000800000 : "bsec"
  638. [    1.405000] EBI CS2: setting up NAND flash
  639. [    1.409000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)
  640. [    1.418000] brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4
  641. [    1.418000]
  642. [    1.429000] Bad block table found at page 131008, version 0x01
  643. [    1.435000] Bad block table found at page 130944, version 0x01
  644. [    1.454000] Creating 3 MTD partitions on "brcmnand.0":
  645. [    1.459000] 0x000000000000-0x000000800000 : "kernel"
  646. [    1.466000] 0x000000800000-0x000001000000 : "backup_kernel"
  647. [    1.473000] 0x000001000000-0x000010000000 : "raw"
  648.  
  649. [    1.489000] Freeing unused kernel memory: 1996k freed
  650. [    1.674000] brcmfb: addr = 0xac800000 offset = 0x0
  651. [    1.681000] fb0: Broadcom frame buffer device
  652. Try to attach UBI ...
  653. [    1.726000] UBI: attaching mtd10 to ubi0
  654. [    1.730000] UBI: physical eraseblock size:   131072 bytes (128 KiB)
  655. [    1.736000] UBI: logical eraseblock size:    126976 bytes
  656. [    1.741000] UBI: smallest flash I/O unit:    2048
  657. [    1.746000] UBI: VID header offset:          2048 (aligned 2048)
  658. [    1.752000] UBI: data offset:                4096
  659.  
  660. (none) login: [    3.236000] UBI: max. sequence number:       37734
  661. [    3.261000] UBI: attached mtd10 to ubi0
  662. [    3.265000] UBI: MTD device name:            "raw"
  663. [    3.270000] UBI: MTD device size:            240 MiB
  664. [    3.275000] UBI: number of good PEBs:        1916
  665. [    3.280000] UBI: number of bad PEBs:         4
  666. [    3.284000] UBI: number of corrupted PEBs:   0
  667. [    3.289000] UBI: max. allowed volumes:       128
  668. [    3.294000] UBI: wear-leveling threshold:    4096
  669. [    3.299000] UBI: number of internal volumes: 1
  670. [    3.303000] UBI: number of user volumes:     2
  671. [    3.308000] UBI: available PEBs:             42
  672. [    3.312000] UBI: total number of reserved PEBs: 1874
  673. [    3.317000] UBI: number of PEBs reserved for bad PEB handling: 19
  674. [    3.324000] UBI: max/mean erase counter: 25/19
  675. [    3.328000] UBI: image sequence number:  1320996868
  676. [    3.333000] UBI: background thread "ubi_bgt0d" started, PID 513
  677. UBI was attached.
  678. [    3.433000] UBIFS: recovery needed
  679. [    3.562000] UBIFS: recovery completed
  680. [    3.565000] UBIFS: mounted UBI device 0, volume 1, name "persistentfs"
  681. [    3.572000] UBIFS: file system size:   133070848 bytes (129952 KiB, 126 MiB, 1048 LEBs)
  682. [    3.580000] UBIFS: journal size:       6602752 bytes (6448 KiB, 6 MiB, 52 LEBs)
  683. [    3.587000] UBIFS: media format:       w4/r0 (latest is w4/r0)
  684. [    3.593000] UBIFS: default compressor: lzo
  685. [    3.597000] UBIFS: reserved for root:  4952683 bytes (4836 KiB)
  686. Mount rootfs: squashfs from /dev/mtdblock11 to /mnt
  687. rootfs /dev/mtdblock11 mount successful
  688. Fastboot enabled
  689. Framebuffer custom resolution 0x0 incorrect
  690. Current framebuffer size is 720x576
  691. Sun Jan  1 01:01:00 UTC 2017
  692. deviceinfo:
  693. mac addr  : E4:27:71:41:32:00
  694. serial num: 31D00885F64133101594
  695. board name: SML-482
  696. hw rev    : 0
  697. features  : cvbs hdmi spdif
  698. board     : sml723x
  699. family    : bcm97230
  700. S/N:31D00885F64133101594 MAC:E4:27:71:41:32:00 FW:7.18.38
  701. Setup networking...
  702. [    3.883000] bcmgenet bcmgenet.0: eth0: link up, 100 Mbps, full duplex
  703. [    3.963000] bcmgenet bcmgenet.0: eth0: link down
  704. Initial network configuration:
  705. 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue
  706.     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
  707.     inet 127.0.0.1/8 scope host lo
  708. 2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
  709.     link/ether e4:27:71:41:32:00 brd ff:ff:ff:ff:ff:ff
  710. Skip DHCP setup for fastboot
  711. Wait for USB devices...
  712. [    5.699000] bcmgenet bcmgenet.0: eth0: link up, 100 Mbps, full duplex
  713. No USB storages found.
  714. Remove address on eth0
  715. Start STB application.
  716. The system is going down NOW!
  717. Sent SIGTERM to all processes
  718. Sent SIGKILL to all processes
  719. vm.min_free_kbytes = 8192
  720. vm.overcommit_memory = 1
  721. net.ipv4.conf.all.force_igmp_version = 2
  722. Starting syslogd ...
  723.  
  724. SML-482 login: [   11.210000] nexus: module license 'Proprietary' taints kernel.
  725. [   11.216000] Disabling lock debugging due to kernel taint
  726. [   11.330000] nexus driver initialized
  727. [   12.079000] ### Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/../magnum/portinginterface/hdm/src/common/bhdm_edid.c:4264
  728. [   13.394000] RTL871X: module init start
  729. [   13.397000] RTL871X: rtl8188eu v4.3.0.8_13968.20150417
  730. [   13.403000] RTL871X: build time: Jul 23 2020 16:07:06
  731. [   13.409000] usbcore: registered new interface driver rtl8188eu
  732. [   13.415000] RTL871X: module init ret=0
  733. [   13.802000] usbcore: registered new interface driver rtl8192eu
  734. [   13.965000] rtw driver version=v2.0.939.20100726
  735. [   13.971000] usbcore: registered new interface driver rtw_usb_drv
  736. [   14.214000] rtusb init rt2870 --->
  737. [   14.219000] usbcore: registered new interface driver rt2870
  738. 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue
  739.     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
  740.     inet 127.0.0.1/8 scope host lo
  741. 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
  742.     link/ether e4:27:71:41:32:00 brd ff:ff:ff:ff:ff:ff
  743.     inet 192.168.0.143/24 brd 192.168.0.255 scope global eth0
  744. [   18.739000] ### Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/../magnum/portinginterface/hdm/src/common/bhdm_edid.c:4264
  745. [   19.347000] ### Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/../magnum/portinginterface/hdm/src/common/bhdm_edid.c:4264
  746. [   19.816000] ### Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/modules/display/src/nexus_display.c:1722
  747. [   19.828000] !!!Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/modules/display/src/nexus_display.c:1723
  748. [   29.881000] ------------[ cut here ]------------
  749. [   29.886000] WARNING: at net/ipv4/tcp.c:1482 tcp_recvmsg+0x15c/0x908()
  750. [   29.893000] recvmsg bug: copied 0 seq 366A3635 rcvnxt 366A4CB5 fl 0
  751. [   29.899000] Modules linked in: rt5572sta(O) 8192cu(O) 8192eu(O) 8188eu(O) nexus(PO) brcmfb(O)
  752. [   29.908000] Call Trace:
  753. [   29.910000] [<8046177c>] dump_stack+0x8/0x34
  754. [   29.914000] [<80020cf4>] warn_slowpath_common+0x78/0xa4
  755. [   29.920000] [<80020d4c>] warn_slowpath_fmt+0x2c/0x38
  756. [   29.925000] [<803c7fe8>] tcp_recvmsg+0x15c/0x908
  757. [   29.929000] [<803e8980>] inet_recvmsg+0x80/0x9c
  758. [   29.934000] [<80381104>] sock_aio_read+0x10c/0x124
  759. [   29.939000] [<800ae3a0>] do_sync_read+0xa8/0xf8
  760. [   29.943000] [<800aeb64>] vfs_read+0xc0/0x14c
  761. [   29.948000] [<800aefcc>] sys_read+0x50/0x8c
  762. [   29.952000] [<8000d0e8>] stack_done+0x20/0x44
  763. [   29.956000]
  764. [   29.958000] ---[ end trace 2b4c6e0470fbc4ab ]---
  765. [   39.235000] Break instruction in kernel code[#1]:
  766. [   39.240000] Cpu 1
  767. [   39.242000] $ 0   : 00000000 10008b00 00000001 0e014c1a
  768. [   39.248000] $ 4   : afc73ed8 3b9aca00 00000027 00000026
  769. [   39.253000] $ 8   : 00008f9e 3fa7145a 25189170 ffffffff
  770. [   39.258000] $12   : 80550000 005075d0 762673d0 004e9b90
  771. [   39.264000] $16   : 8160e630 80782630 805567e8 80780000
  772. [   39.269000] $20   : 00000027 0e014c1a 00000001 00000004
  773. [   39.274000] $24   : 00000000 8004f564
  774. [   39.280000] $28   : afc72000 afc73ec0 80556a5c 80061cf8
  775. [   39.285000] Hi    : 0e014c1a
  776. [   39.288000] Lo    : 00000001
  777. [   39.291000] epc   : 80061d04 tick_nohz_idle_exit+0x90/0x278
  778. [   39.296000]     Tainted: P        W  O
  779. [   39.300000] ra    : 80061cf8 tick_nohz_idle_exit+0x84/0x278
  780. [   39.306000] Status: 10008b02    KERNEL EXL
  781. [   39.310000] Cause : 00800024
  782. [   39.313000] PrId  : 0002a064 (Broadcom BMIPS4380)
  783. [   39.318000] Modules linked in: rt5572sta(O) 8192cu(O) 8192eu(O) 8188eu(O) nexus(PO) brcmfb(O)
  784. [   39.326000] Process swapper/1 (pid: 0, threadinfo=afc72000, task=afc44d68, tls=00000000)
  785. [   39.334000] Stack : 80550000 00411600 afc72000 afc73ef0 80790000 80061bc8 0e014c1a 00000027
  786. [   39.343000]         807857c4 00000002 805567e8 80780000 80554940 00411600 804e0804 804e0818
  787. [   39.351000]         80790000 80005f94 8160f2c0 afc73d38 80790000 00000000 80554940 8160f2c0
  788. [   39.360000]         afc73d38 80790000 00000000 80457ec4 00000000 00000000 00000000 00000000
  789. [   39.368000]         00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  790. [   39.377000]         ...
  791. [   39.379000] Call Trace:
  792. [   39.382000] [<80061d04>] tick_nohz_idle_exit+0x90/0x278
  793. [   39.387000] [<80005f94>] cpu_idle+0xd8/0xe8
  794. [   39.391000] [<80457ec4>] bmips_secondary_reentry+0x0/0x2c
  795. [   39.397000]
  796. [   39.398000]
  797. [   39.398000] Code: 8fb50018  8fb4001c  8e020054 <5040000d> 8e020040  03d7f021  02201021  8fd10000  00518821
  798. [   39.410000] ---[ end trace 2b4c6e0470fbc4ac ]---
  799. [   39.415000] Kernel panic - not syncing: Attempted to kill the idle task!
  800. [   39.421000] Rebooting in 5 seconds..
  801. BCM72300012
  802. x
  803. AVS 0.5.5
  804. B1
  805. PV=0000031E
  806. PV=00000328
  807. MV=000003AE
  808.  
  809. M0
  810. SHMOO VER 1.14
  811. MCB
  812.  
  813. PKID 20121012 003B6000 003B0000 041B103F 00001C00
  814.  
  815. S30000177
  816. 00000E60
  817. +00000004
  818. RDLY W0 00000004
  819.  
  820. RDEN W0 0000001E
  821.  
  822. RDQS W0
  823.  
  824.     0000000000111111111122222222223333333333444444444455555555556666
  825.     0123456789012345678901234567890123456789012345678901234567890123
  826.  00 --------------++++++++++++++++++X+++++++++++++++++--------------
  827.  01 ----------+++++++++++++++++X+++++++++++++++++-------------------
  828.  02 -------------+++++++++++++++++++X++++++++++++++++++-------------
  829.  03 --------------++++++++++++++++++X+++++++++++++++++--------------
  830.  04 ---------+++++++++++++++++X+++++++++++++++++--------------------
  831.  05 --------++++++++++++++++++X++++++++++++++++++-------------------
  832.  06 --------+++++++++++++++++X+++++++++++++++++---------------------
  833.  07 -------------+++++++++++++++++X++++++++++++++++-----------------
  834.  08 ---------++++++++++++++++X++++++++++++++++----------------------
  835.  09 ---------+-+++++++++++++++++X+++++++++++++++++------------------
  836.  10 ------------++++++++++++++++X++++++++++++++++-------------------
  837.  11 -----------+++++++++++++++++X+++++++++++++++++------------------
  838.  12 -------+++++++++++++++++X+++++++++++++++++----------------------
  839.  13 ------++++++++++++++++X++++++++++++++++-------------------------
  840.  14 ------+++++++++++++++++X+++++++++++++++++-----------------------
  841.  15 ----------++++++++++++++++++X+++++++++++++++++------------------
  842.  
  843.  
  844. P W0
  845.  
  846.     0000000000111111111122222222223333333333444444444455555555556666
  847.     0123456789012345678901234567890123456789012345678901234567890123
  848.  00 ---------+-++++++++++++++++++++X+++++++++++++++++++-------------
  849.  01 -----++++++++++++++++++++X+++++++++++++++++++-------------------
  850.  02 ---------+-++++++++++++++++++++X+++++++++++++++++++-------------
  851.  03 -----------+++++++++++++++++++X+++++++++++++++++++--------------
  852.  04 ---+-+++++++++++++++++++X+++++++++++++++++++--------------------
  853.  05 -----++++++++++++++++++++X+++++++++++++++++++-------------------
  854.  06 ------+++++++++++++++++++X++++++++++++++++++--------------------
  855.  07 -------+-+++++++++++++++++++X++++++++++++++++++-----------------
  856.  08 ----------++++++++++++++++++X+++++++++++++++++------------------
  857.  09 -----------+++++++++++++++++X+++++++++++++++++------------------
  858.  10 -----------++++++++++++++++++X+++++++++++++++++-----------------
  859.  11 -----------+-+++++++++++++++++X++++++++++++++++-----------------
  860.  12 ----+-++++++++++++++++++X++++++++++++++++++---------------------
  861.  13 --+---++++++++++++++++++X++++++++++++++++++---------------------
  862.  14 -------+-+++++++++++++++++X++++++++++++++++---------------------
  863.  15 ----------++++++++++++++++++X+++++++++++++++++------------------
  864.  
  865.  
  866. N W0
  867.  
  868.     0000000000111111111122222222223333333333444444444455555555556666
  869.     0123456789012345678901234567890123456789012345678901234567890123
  870.  00 -------------++++++++++++++++++++X+++++++++++++++++++-----------
  871.  01 -----------++++++++++++++++++X+++++++++++++++++-----------------
  872.  02 -------------++++++++++++++++++++X++++++++++++++++++++----------
  873.  03 -----------+-++++++++++++++++++++X++++++++++++++++++++----------
  874.  04 ---------++++++++++++++++++X++++++++++++++++++------------------
  875.  05 -------+-++++++++++++++++++X++++++++++++++++++------------------
  876.  06 -------++++++++++++++++++X++++++++++++++++++--------------------
  877.  07 -----------+-+++++++++++++++++++X++++++++++++++++++-------------
  878.  08 -------+-++++++++++++++++X++++++++++++++++----------------------
  879.  09 ---------++++++++++++++++++X++++++++++++++++++------------------
  880.  10 ---------+-+++++++++++++++++X+++++++++++++++++------------------
  881.  11 ---------+-+++++++++++++++++X+++++++++++++++++------------------
  882.  12 ---+-++++++++++++++++++X++++++++++++++++++----------------------
  883.  13 ---++++++++++++++++++X+++++++++++++++++-------------------------
  884.  14 ---+-+++++++++++++++++X+++++++++++++++++------------------------
  885.  15 --------+-++++++++++++++++++X+++++++++++++++++------------------
  886.  
  887.  
  888. WRDQ W0
  889.  
  890.     0000000000111111111122222222223333333333444444444455555555556666
  891.     0123456789012345678901234567890123456789012345678901234567890123
  892.  00 +++++++++++++++++X++++++++++++++++--------------++++++++++++++++
  893.  01 +++++++++++++++X+++++++++++++++-----------------++++++++++++++++
  894.  02 +++++++++++++++++X++++++++++++++++--------------++++++++++++++++
  895.  03 +++++++++++++++++X+++++++++++++++++------------+++++++++++++++++
  896.  04 +++++++++++++++X++++++++++++++-----------------+++++++++++++++++
  897.  05 ++++++++++++++++X++++++++++++++++---------------++++++++++++++++
  898.  06 ++++++++++++++++X+++++++++++++++----------------++++++++++++++++
  899.  07 +++++++++++++++++X++++++++++++++++--------------++++++++++++++++
  900.  08 +++++++++++++++X+++++++++++++++-----------------++++++++++++++++
  901.  09 +++++++++++++++++X++++++++++++++++-------------+++++++++++++++++
  902.  10 +++++++++++++++++X++++++++++++++++--------------++++++++++++++++
  903.  11 ++++++++++++++++X++++++++++++++++----------------+-+++++++++++++
  904.  12 +++++++++++++++X+++++++++++++++-----------------++++++++++++++++
  905.  13 ++++++++++++++X++++++++++++++------------------+++++++++++++++++
  906.  14 +++++++++++++++X+++++++++++++++----------------+++++++++++++++++
  907.  15 ++++++++++++++++X++++++++++++++++----------------+++++++++++++++
  908.  
  909.  
  910. WRDM W0 00000010
  911. WRDM W0 0000000F
  912.  
  913.  
  914. ADDR
  915.  
  916.     0000000000111111111122222222223333333333444444444455555555556666
  917.     0123456789012345678901234567890123456789012345678901234567890123
  918.  00 +++++++++++++++++++++++++++SX+++++++++++++++++++++++++++++------
  919.  
  920. CZ#@SG
  921.  
  922. BCM97230B2 CFE v3.12 build 335, CFE core v3.28, Endian Mode: Little
  923. Build Date: Thu Apr 25 19:56:45 MSK 2013 (roman@ubuntu)
  924. Copyright (C) Broadcom Corporation.
  925.  
  926. Hit any key to stop autoboot:
  927. MACRONIX SPI flash detected: Size = 8MB, Sector Size 4096, Page Size 256
  928. Enabling NAND flash at CS2.
  929. BCHP_NAND_FLASH_DEVICE_ID =0xecda1095, BCHP_NAND_FLASH_DEVICE_ID_EXT = 0x44ecda10
  930. Auto configuring NAND @ CS2, with ECC LEVEL=1 & SPARE_AREA_SIZE=16
  931. INFO: Configuring LEDs for PCB rev. 5
  932. CPU speed:       742MHz
  933. Total memory(0): 512MB
  934. DDR Freq:        800 MHz
  935. DDR Mode:        DDR3
  936. DEV TECH:        2GBIT
  937. DDR Width:       16
  938. Boot Device:     SPI
  939. Total flash:     8MB
  940.  
  941. Initializing USB.
  942. USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
  943. Saving shmoo values...
  944. Saved shmoo values....
  945.  
  946. CFE initialized.
  947. Trying to start splash screen...
  948. No valid image found in flash0.splash - disabling splash
  949.  
  950. Executing STARTUP...
  951. Invalid command: "cls"
  952. Available commands: show_logo, gui, ts, erase, pvr, rvr, wvr, rr, wr, info, set, loop, reboot, dir, resetmac, macprog, macprog2, flash, memtest, t, f, e, d, u, uk, uc, batch, go, load, save, boot, ephycfg, ping, ifconfig, g, r, sleep, waitusb, show, testenv, incenv, unsetenv, printenv, setenv, help
  953.  
  954. Loader:elf Filesys:raw Dev:nandflash0.kernel File: Options:(null)
  955. Loading: prog_seg: 0x80001000/7873536 bss: 0x80783400/140896 Entry address is 0x80451ff0
  956. Starting program at 0x80451ff0
  957.  
  958. [    0.000000] Linux version 3.3.8-3.3 (root@runner-pa8yaqg3-project-122-concurrent-0) (gcc version 4.9.4 (GCC) ) #1 SMP Thu Jul 23 16:25:51 UTC 2020
  959. [    0.000000] Fetching vars from bootloader...
  960. [    0.000000] Serial number is "31D00885F64133101594"
  961. [    0.000000] Replacing flash type from NAND to SPI
  962. [    0.000000] found 16 vars.
  963. [    0.000000] Options: moca=0 sata=1 pcie=0 usb=1
  964. [    0.000000] Using 512 MB + 0 MB RAM (from CFE)
  965. [    0.000000] bootconsole [early0] enabled
  966. [    0.000000] CPU revision is: 0002a064 (Broadcom BMIPS4380)
  967. [    0.000000] FPU revision is: 00130001
  968. [    0.000000] Determined physical RAM map:
  969. [    0.000000]  memory: 10000000 @ 00000000 (usable)
  970. [    0.000000]  memory: 10000000 @ 20000000 (usable)
  971. [    0.000000] bmem: adding 160 MB RESERVED region at 64 MB (0x0a000000@0x04000000)
  972. [    0.000000] bmem: adding 224 MB RESERVED region at 512 MB (0x0e000000@0x20000000)
  973. [    0.000000] Initrd not found or empty - disabling initrd
  974. [    0.000000] Zone PFN ranges:
  975. [    0.000000]   Normal   0x00000000 -> 0x00030000
  976. [    0.000000] Movable zone start PFN for each node
  977. [    0.000000] Early memory PFN ranges
  978. [    0.000000]     0: 0x00000000 -> 0x00010000
  979. [    0.000000]     0: 0x00020000 -> 0x00030000
  980. [    0.000000] PERCPU: Embedded 7 pages/cpu @81606000 s5120 r8192 d15360 u32768
  981. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129536
  982. [    0.000000] Kernel command line: bmem=160M@64M bmem=224M@512M nandcs=2 panic=5
  983. [    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  984. [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  985. [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  986. [    0.000000] Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
  987. [    0.000000] Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
  988. [    0.000000] Memory: 116612k/524288k available (4513k kernel code, 407676k reserved, 1180k data, 1996k init, 0k highmem)
  989. [    0.000000] Hierarchical RCU implementation.
  990. [    0.000000] NR_IRQS:160
  991. [    0.000000] Measuring MIPS counter frequency...
  992. [    0.000000] Detected MIPS clock frequency: 742 MHz (371.255 MHz counter)
  993. [    0.000000] Console: colour dummy device 80x25
  994. [    0.001000] Calibrating delay loop... 741.37 BogoMIPS (lpj=370688)
  995. [    0.012000] pid_max: default: 32768 minimum: 301
  996. [    0.013000] Mount-cache hash table entries: 512
  997. [    0.015000] SMP: Booting CPU1...
  998. [    0.020000] CPU revision is: 0002a064 (Broadcom BMIPS4380)
  999. [    0.020000] FPU revision is: 00130001
  1000. [    0.020000] Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
  1001. [    0.020000] Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
  1002. [    0.029000] SMP: CPU1 is running
  1003. [    0.029000] Brought up 2 CPUs
  1004. [    0.033000] NET: Registered protocol family 16
  1005. [    0.035000] USB0: power enable is active high; overcurrent is active low
  1006. [    0.036000] USB1: power enable is active high; overcurrent is active low
  1007. [    0.053000] bio: create slab <bio-0> at 0
  1008. [    0.055000] SCSI subsystem initialized
  1009. [    0.056000] usbcore: registered new interface driver usbfs
  1010. [    0.057000] usbcore: registered new interface driver hub
  1011. [    0.058000] usbcore: registered new device driver usb
  1012. [    0.060000] cfg80211: Calling CRDA to update world regulatory domain
  1013. [    0.061000] Switching to clocksource wktmr
  1014. [    0.077000] NET: Registered protocol family 2
  1015. [    0.081000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  1016. [    0.089000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  1017. [    0.096000] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
  1018. [    0.103000] TCP: Hash tables configured (established 16384 bind 16384)
  1019. [    0.109000] TCP reno registered
  1020. [    0.112000] UDP hash table entries: 256 (order: 1, 8192 bytes)
  1021. [    0.118000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  1022. [    0.125000] NET: Registered protocol family 1
  1023. [    0.129000] RPC: Registered named UNIX socket transport module.
  1024. [    0.135000] RPC: Registered udp transport module.
  1025. [    0.140000] RPC: Registered tcp transport module.
  1026. [    0.144000] RPC: Registered tcp NFSv4.1 backchannel transport module.
  1027. [    0.169000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  1028. [    0.175000] NTFS driver 2.1.30 [Flags: R/O].
  1029. [    0.179000] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
  1030. [    0.186000] fuse init (API version 7.18)
  1031. [    0.190000] fuse init DCACHE_BUG workaround enabled
  1032. [    0.195000] msgmni has been set to 227
  1033. [    0.207000] io scheduler noop registered
  1034. [    0.211000] io scheduler cfq registered (default)
  1035. [    0.216000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  1036. [    0.223000] serial8250.0: ttyS0 at MMIO 0x10406900 (irq = 65) is a 16550A
  1037. [    0.231000] serial8250.0: ttyS1 at MMIO 0x10406940 (irq = 66) is a 16550A
  1038. [    0.244000] console [ttyS2] enabled, bootconsole disabled 67) is a 16550A
  1039. [    0.244000] console [ttyS2] enabled, bootconsole disabled
  1040. [    0.265000] brd: module loaded
  1041. [    0.274000] loop: module loaded
  1042. [    0.278000] ahci: SSS flag set, parallel bus scan disabled
  1043. [    0.295000] ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
  1044. [    0.303000] ahci strict-ahci.0: flags: sntf stag clo slum part
  1045. [    0.314000] scsi0 : ahci_platform
  1046. [    0.318000] scsi1 : ahci_platform
  1047. [    0.322000] ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 41
  1048. [    0.330000] ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 41
  1049. [    0.340000] brcmstb_nand: NAND controller driver is loaded
  1050. [    0.348000] All hardware filters disabled
  1051. [    0.452000] bcmgenet: configuring instance #0 for internal PHY
  1052. [    0.478000] bcmgenet bcmgenet.0: eth0: link down
  1053. [    0.485000] All hardware filters disabled
  1054. [    0.643000] ata1: SATA link down (SStatus 0 SControl 300)
  1055. [    0.809000] No PHY detected, not registering interface:1
  1056. [    0.814000] bcmgenet: probe of bcmgenet.1 failed with error -5
  1057. [    0.820000] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
  1058. [    0.828000] usbcore: registered new interface driver pegasus
  1059. [    0.834000] usbcore: registered new interface driver asix
  1060. [    0.839000] usbcore: registered new interface driver cdc_ether
  1061. [    0.845000] usbcore: registered new interface driver net1080
  1062. [    0.851000] usbcore: registered new interface driver cdc_subset
  1063. [    0.857000] usbcore: registered new interface driver zaurus
  1064. [    0.863000] usbcore: registered new interface driver cdc_ncm
  1065. [    0.869000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  1066. [    0.876000] ehci-brcm ehci-brcm.0: Broadcom STB EHCI
  1067. [    0.881000] ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
  1068. [    0.920000] ehci-brcm ehci-brcm.0: irq 69, io mem 0x10480300
  1069. [    0.931000] ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
  1070. [    0.937000] hub 1-0:1.0: USB hub found
  1071. [    0.941000] hub 1-0:1.0: 1 port detected
  1072. [    0.945000] ehci-brcm ehci-brcm.1: Broadcom STB EHCI
  1073. [    0.950000] ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
  1074. [    0.953000] ata2: SATA link down (SStatus 0 SControl 300)
  1075. [    0.995000] ehci-brcm ehci-brcm.1: irq 70, io mem 0x10480500
  1076. [    1.006000] ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
  1077. [    1.012000] hub 2-0:1.0: USB hub found
  1078. [    1.016000] hub 2-0:1.0: 1 port detected
  1079. [    1.020000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  1080. [    1.027000] ohci-brcm ohci-brcm.0: Broadcom STB OHCI
  1081. [    1.032000] ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 3
  1082. [    1.040000] ohci-brcm ohci-brcm.0: irq 71, io mem 0x10480400
  1083. [    1.110000] hub 3-0:1.0: USB hub found
  1084. [    1.114000] hub 3-0:1.0: 1 port detected
  1085. [    1.118000] ohci-brcm ohci-brcm.1: Broadcom STB OHCI
  1086. [    1.124000] ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 4
  1087. [    1.131000] ohci-brcm ohci-brcm.1: irq 72, io mem 0x10480600
  1088. [    1.202000] hub 4-0:1.0: USB hub found
  1089. [    1.206000] hub 4-0:1.0: 1 port detected
  1090. [    1.211000] Initializing USB Mass Storage driver...
  1091. [    1.216000] usbcore: registered new interface driver usb-storage
  1092. [    1.222000] USB Mass Storage support registered.
  1093. [    1.227000] mousedev: PS/2 mouse device common for all mice
  1094. [    1.233000] lirc_dev: IR Remote Control driver registered, major 253
  1095. [    1.239000] IR LIRC bridge handler initialized
  1096. [    1.244000] sdhci: Secure Digital Host Controller Interface driver
  1097. [    1.250000] sdhci: Copyright(c) Pierre Ossman
  1098. [    1.254000] sdhci-pltfm: SDHCI platform and OF driver helper
  1099. [    1.260000] sdhci-brcmstb sdhci-brcmstb.0: Enabling controller
  1100. [    1.269000] mmc0: SDHCI controller on sdhci-brcmstb.0 [sdhci-brcmstb.0] using ADMA
  1101. [    1.277000] usbcore: registered new interface driver usbhid
  1102. [    1.283000] usbhid: USB HID core driver
  1103. [    1.287000] TCP cubic registered
  1104. [    1.290000] NET: Registered protocol family 17
  1105. [    1.295000] PM: CP0 COUNT/COMPARE frequency does not depend on divisor
  1106. [    1.303000] EBI CS0: setting up SPI flash (primary)
  1107. [    1.308000] spi_brcmstb spi_brcmstb.0: 1-lane output, 3-byte address
  1108. [    1.315000] m25p80 spi0.0: found mx25l6405d, expected m25p80
  1109. [    1.321000] m25p80 spi0.0: mx25l6405d (8192 Kbytes)
  1110. [    1.349000] Creating 8 MTD partitions on "spi0.0":
  1111. [    1.354000] 0x000000000000-0x000000100000 : "bootldr"
  1112. [    1.361000] 0x000000100000-0x000000110000 : "macadr"
  1113. [    1.367000] 0x000000110000-0x000000120000 : "nvram"
  1114. [    1.373000] 0x000000120000-0x000000180000 : "branding"
  1115. [    1.379000] 0x000000180000-0x000000200000 : "splash"
  1116. [    1.390000] 0x000000200000-0x000000600000 : "ro_kernel"
  1117. [    1.396000] 0x000000600000-0x000000610000 : "env"
  1118. [    1.402000] 0x000000610000-0x000000800000 : "bsec"
  1119. [    1.418000] EBI CS2: setting up NAND flash
  1120. [    1.423000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)
  1121. [    1.431000] brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4
  1122. [    1.431000]
  1123. [    1.442000] Bad block table found at page 131008, version 0x01
  1124. [    1.448000] Bad block table found at page 130944, version 0x01
  1125. [    1.470000] Creating 3 MTD partitions on "brcmnand.0":
  1126. [    1.475000] 0x000000000000-0x000000800000 : "kernel"
  1127. [    1.486000] 0x000000800000-0x000001000000 : "backup_kernel"
  1128. [    1.493000] 0x000001000000-0x000010000000 : "raw"
  1129.  
  1130. [    1.504000] Freeing unused kernel memory: 1996k freed
  1131. [    1.669000] brcmfb: addr = 0xac800000 offset = 0x0
  1132. [    1.676000] fb0: Broadcom frame buffer device
  1133. Try to attach UBI ...
  1134. [    1.720000] UBI: attaching mtd10 to ubi0
  1135. [    1.724000] UBI: physical eraseblock size:   131072 bytes (128 KiB)
  1136. [    1.731000] UBI: logical eraseblock size:    126976 bytes
  1137. [    1.736000] UBI: smallest flash I/O unit:    2048
  1138. [    1.741000] UBI: VID header offset:          2048 (aligned 2048)
  1139. [    1.747000] UBI: data offset:                4096
  1140.  
  1141. (none) login: [    3.251000] UBI: max. sequence number:       37738
  1142. [    3.276000] UBI: attached mtd10 to ubi0
  1143. [    3.280000] UBI: MTD device name:            "raw"
  1144. [    3.285000] UBI: MTD device size:            240 MiB
  1145. [    3.290000] UBI: number of good PEBs:        1916
  1146. [    3.295000] UBI: number of bad PEBs:         4
  1147. [    3.300000] UBI: number of corrupted PEBs:   0
  1148. [    3.304000] UBI: max. allowed volumes:       128
  1149. [    3.309000] UBI: wear-leveling threshold:    4096
  1150. [    3.314000] UBI: number of internal volumes: 1
  1151. [    3.319000] UBI: number of user volumes:     2
  1152. [    3.323000] UBI: available PEBs:             42
  1153. [    3.328000] UBI: total number of reserved PEBs: 1874
  1154. [    3.333000] UBI: number of PEBs reserved for bad PEB handling: 19
  1155. [    3.339000] UBI: max/mean erase counter: 25/19
  1156. [    3.343000] UBI: image sequence number:  1320996868
  1157. [    3.348000] UBI: background thread "ubi_bgt0d" started, PID 513
  1158. UBI was attached.
  1159. [    3.448000] UBIFS: recovery needed
  1160. [    3.591000] UBIFS: recovery completed
  1161. [    3.594000] UBIFS: mounted UBI device 0, volume 1, name "persistentfs"
  1162. [    3.601000] UBIFS: file system size:   133070848 bytes (129952 KiB, 126 MiB, 1048 LEBs)
  1163. [    3.609000] UBIFS: journal size:       6602752 bytes (6448 KiB, 6 MiB, 52 LEBs)
  1164. [    3.616000] UBIFS: media format:       w4/r0 (latest is w4/r0)
  1165. [    3.622000] UBIFS: default compressor: lzo
  1166. [    3.626000] UBIFS: reserved for root:  4952683 bytes (4836 KiB)
  1167. Mount rootfs: squashfs from /dev/mtdblock11 to /mnt
  1168. rootfs /dev/mtdblock11 mount successful
  1169. Fastboot enabled
  1170. Framebuffer custom resolution 0x0 incorrect
  1171. Current framebuffer size is 720x576
  1172. Sun Jan  1 01:01:00 UTC 2017
  1173. deviceinfo:
  1174. mac addr  : E4:27:71:41:32:00
  1175. serial num: 31D00885F64133101594
  1176. board name: SML-482
  1177. hw rev    : 0
  1178. features  : cvbs hdmi spdif
  1179. board     : sml723x
  1180. family    : bcm97230
  1181. S/N:31D00885F64133101594 MAC:E4:27:71:41:32:00 FW:7.18.38
  1182. Setup networking...
  1183. [    3.911000] bcmgenet bcmgenet.0: eth0: link up, 100 Mbps, full duplex
  1184. [    3.991000] bcmgenet bcmgenet.0: eth0: link down
  1185. Initial network configuration:
  1186. 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue
  1187.     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
  1188.     inet 127.0.0.1/8 scope host lo
  1189. 2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
  1190.     link/ether e4:27:71:41:32:00 brd ff:ff:ff:ff:ff:ff
  1191. Skip DHCP setup for fastboot
  1192. Wait for USB devices...
  1193. [    5.601000] bcmgenet bcmgenet.0: eth0: link up, 100 Mbps, full duplex
  1194. No USB storages found.
  1195. Remove address on eth0
  1196. Start STB application.
  1197. The system is going down NOW!
  1198. Sent SIGTERM to all processes
  1199. Sent SIGKILL to all processes
  1200. vm.min_free_kbytes = 8192
  1201. vm.overcommit_memory = 1
  1202. net.ipv4.conf.all.force_igmp_version = 2
  1203. Starting syslogd ...
  1204.  
  1205. SML-482 login: [   11.271000] nexus: module license 'Proprietary' taints kernel.
  1206. [   11.277000] Disabling lock debugging due to kernel taint
  1207. [   11.392000] nexus driver initialized
  1208. [   12.150000] ### Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/../magnum/portinginterface/hdm/src/common/bhdm_edid.c:4264
  1209. [   13.465000] RTL871X: module init start
  1210. [   13.469000] RTL871X: rtl8188eu v4.3.0.8_13968.20150417
  1211. [   13.474000] RTL871X: build time: Jul 23 2020 16:07:06
  1212. [   13.480000] usbcore: registered new interface driver rtl8188eu
  1213. [   13.486000] RTL871X: module init ret=0
  1214. [   13.946000] usbcore: registered new interface driver rtl8192eu
  1215. [   14.086000] rtw driver version=v2.0.939.20100726
  1216. [   14.091000] usbcore: registered new interface driver rtw_usb_drv
  1217. [   14.286000] rtusb init rt2870 --->
  1218. [   14.291000] usbcore: registered new interface driver rt2870
  1219. 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue
  1220.     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
  1221.     inet 127.0.0.1/8 scope host lo
  1222. 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
  1223.     link/ether e4:27:71:41:32:00 brd ff:ff:ff:ff:ff:ff
  1224.     inet 192.168.0.143/24 brd 192.168.0.255 scope global eth0
  1225. [   18.836000] ### Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/../magnum/portinginterface/hdm/src/common/bhdm_edid.c:4264
  1226. [   19.444000] ### Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/../magnum/portinginterface/hdm/src/common/bhdm_edid.c:4264
  1227. [   19.940000] ### Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/modules/display/src/nexus_display.c:1722
  1228. [   19.952000] !!!Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/modules/display/src/nexus_display.c:1723
  1229. [   29.297000] CPU 1 Unable to handle kernel paging request at virtual address ffffb568, epc == afd49d94, ra == afd49d80
  1230. [   29.308000] Oops[#1]:
  1231. [   29.308000] Cpu 1
  1232. [   29.308000] $ 0   : 00000000 00000001 afb01a48 afd1fb58
  1233. [   29.317000] $ 4   : 00000001 af123c40 fffbde91 00000000
  1234. [   29.323000] $ 8   : 0000e77c fffbde7a 00000001 00000001
  1235. [   29.323000] $12   : 00000001 00000000 00000400 81000000
  1236. [   29.323000] $16   : ffffffff 00000002 00000000 80556a60
  1237. [   29.323000] $20   : 00000000 00000024 8ed1cc00 800e0000
  1238. [   29.323000] $24   : 00000001 0000000c
  1239. [   29.323000] $28   : afb00000 afb01a58 af16d000 afd49d80
  1240. [   29.323000] Hi    : 00000000
  1241. [   29.323000] Lo    : 00000000
  1242. [   29.323000] epc   : afd49d94 0xafd49d94
  1243. [   29.323000]     Tainted: P           O
  1244. [   29.323000] ra    : afd49d80 0xafd49d80
  1245. [   29.323000] Status: 10008b03    KERNEL EXL IE
  1246. [   29.323000] Cause : 00800008
  1247. [   29.323000] BadVA : ffffb568
  1248. [   29.323000] PrId  : 0002a064 (Broadcom BMIPS4380)
  1249. [   29.323000] Modules linked in: rt5572sta(O) 8192cu(O) 8192eu(O) 8188eu(O) nexus(PO) brcmfb(O)
  1250. [   29.323000] Process nc::Thread (pid: 1028, threadinfo=afb00000, task=afd1fb58, tls=59217940)
  1251. [   29.323000] Stack : 00011200 afcc6280 8003f724 8007b798 00000ffe af1a11c0 00000002 8022ebb0
  1252. [   29.323000]         80550000 af972408 00000000 80556a5c 80782b98 00000000 af1a11c0 8022ed00
  1253. [   29.323000]         afcc6280 00000000 00000010 00000024 af1a11c0 800e262c afa07d08 afa07cc8
  1254. [   29.323000]         af972588 af9723c8 0000000f af972448 afa41208 805566c0 805566c0 00000000
  1255. [   29.323000]         afa41208 af1a11c0 805566c0 00000000 00000000 8ed1cc00 800e0000 800db940
  1256. [   29.323000]         ...
  1257. [   29.323000] Call Trace:
  1258. [   29.323000] [<8003f724>] autoremove_wake_function+0x0/0x44
  1259. [   29.323000] [<8007b798>] mempool_alloc+0x60/0x150
  1260. [   29.323000] [<8022ebb0>] generic_make_request+0x14/0xb4
  1261. [   29.323000] [<8022ed00>] submit_bio+0xb0/0x150
  1262. [   29.323000] [<800e262c>] bio_alloc_bioset+0x58/0xfc
  1263. [   29.323000] [<800e0000>] __find_get_block+0x11c/0x360
  1264. [   29.323000] [<800db940>] submit_bh+0x1ec/0x224
  1265. [   29.323000] [<800dcbd8>] end_buffer_read_sync+0x0/0x7c
  1266. [   29.323000] [<800dbb2c>] ll_rw_block+0x1b4/0x1f8
  1267. [   29.323000] [<80005c10>] do_IRQ+0x18/0x28
  1268. [   29.323000] [<800283ec>] irq_exit+0x60/0xc8
  1269. [   29.323000] [<80177d98>] squashfs_read_data+0x5b8/0x810
  1270. [   29.323000] [<8007f024>] __alloc_pages_nodemask+0x110/0x610
  1271. [   29.323000] [<801781f8>] squashfs_cache_get+0x208/0x3f8
  1272. [   29.323000] [<80179c04>] squashfs_readpage+0x7a4/0xbb0
  1273. [   29.323000] [<8007f024>] __alloc_pages_nodemask+0x110/0x610
  1274. [   29.323000] [<800831dc>] __do_page_cache_readahead+0x230/0x28c
  1275. [   29.323000] [<800833a4>] ra_submit+0x28/0x34
  1276. [   29.323000] [<8007a418>] filemap_fault+0x1b0/0x4e8
  1277. [   29.323000] [<8009491c>] __do_fault+0xd4/0x59c
  1278. [   29.323000] [<80043468>] enqueue_hrtimer+0x24/0x6c
  1279. [   29.323000] [<80097e1c>] handle_pte_fault+0x164/0x900
  1280. [   29.323000] [<80098690>] handle_mm_fault+0xd8/0x120
  1281. [   29.323000] [<8000f1b4>] do_page_fault+0x114/0x360
  1282. [   29.323000] [<80027eec>] __do_softirq+0x104/0x1b4
  1283. [   29.323000] [<8002818c>] do_softirq+0x54/0x6c
  1284. [   29.323000] [<80005c10>] do_IRQ+0x18/0x28
  1285. [   29.323000] [<800283ec>] irq_exit+0x60/0xc8
  1286. [   29.323000] [<80003100>] plat_irq_dispatch+0xd4/0xfc
  1287. [   29.323000] [<80003e80>] ret_from_exception+0x0/0x28
  1288. [   29.323000]
  1289. [   29.323000]
  1290. [   29.323000] Code: 00000002  afcc6200  afc15440 <8007b568> 8007b954  00000000  afd49da0  afd49da0  00000000
  1291. [   29.610000] ---[ end trace 285a019508ea5839 ]---
  1292. [   29.615000] ------------[ cut here ]------------
  1293. [   29.620000] WARNING: at kernel/exit.c:878 do_exit+0x6a8/0x6b0()
  1294. [   29.626000] Modules linked in: rt5572sta(O) 8192cu(O) 8192eu(O) 8188eu(O) nexus(PO) brcmfb(O)
  1295. [   29.635000] Call Trace:
  1296. [   29.637000] [<8046177c>] dump_stack+0x8/0x34
  1297. [   29.641000] [<80020cf4>] warn_slowpath_common+0x78/0xa4
  1298. [   29.647000] [<80020da8>] warn_slowpath_null+0x18/0x24
  1299. [   29.652000] [<800259d0>] do_exit+0x6a8/0x6b0
  1300. [   29.656000] [<80009bec>] default_cu2_call+0x0/0x4c
  1301. [   29.661000]
  1302. [   29.662000] ---[ end trace 285a019508ea583a ]---
  1303.  
RAW Paste Data