API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Aug 28th, 2018
204
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 15.29 KB | None | 0 0
raw download clone embed print report
  1. 2 TiB)
  2. sd 0:0:0:0: [sda] 0-byte physical blocks
  3. sd 1:0:0:0: [sdb] Sector size 0 reported, assuming 512.
  4. sd 1:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
  5. sd 1:0:0:0: [sdb] 0-byte physical blocks
  6. sd 0:0:0:0: [sda] Write Protect is off
  7. sd 0:0:0:0: [sda] Mode Sense: 23 00 10 00
  8. sd 0:0:0:0: Attached scsi generic sg0 type 0
  9. sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
  10. sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512.
  11. sd 1:0:0:0: Attached scsi generic sg1 type 0
  12. sd 1:0:0:0: [sdb] Write Protect is off
  13. sd 1:0:0:0: [sdb] Mode Sense: 23 00 10 00
  14. Loading Marvell Ethernet Driver:
  15. o Cached descriptors in DRAM
  16. o DRAM SW cache-coherency
  17. o 1 Giga ports supported
  18. o Single RX Queue support - ETH_DEF_RXQ=0
  19. o Single TX Queue support - ETH_DEF_TXQ=0
  20. o TCP segmentation offload (TSO) supported
  21. o Large Receive offload (LRO) supported
  22. o Receive checksum offload supported
  23. o Transmit checksum offload supported
  24. o Network Fast Processing (Routing) supported - (Disabled)
  25. o Driver ERROR statistics enabled
  26. o Proc tool API enabled
  27. o SKB Reuse supported - (Disabled)
  28. o SKB Recycle supported - (Disabled)
  29. o Rx descripors: q0=128
  30. o Tx descripors: q0=532
  31. o Loading network interface(s):
  32. o register under mv88fx_eth platform
  33. sda: o eth0, ifindex = 2, GbE port = 0
  34.  
  35. mvFpRuleDb (d1070000): 16384 entries, 65536 bytes
  36. Counter=0, opIdx=6, overhead=16
  37. Counter=1, opIdx=2, overhead=0
  38. Counter=2, opIdx=1, overhead=18
  39. Counter=3, opIdx=2, overhead=0
  40. sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
  41. sd 1:0:0:0: [sdb] Sector size 0 reported, assuming 512.
  42. NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit)
  43. Scanning device for bad blocks
  44. Bad eraseblock 620 at 0x000004d80000
  45. Bad eraseblock 788 at 0x000006280000
  46. Bad eraseblock 835 at 0x000006860000
  47. 9 cmdlinepart partitions found on MTD device nand_mtd
  48. Using command line partition definition
  49. Creating 9 MTD partitions on "nand_mtd":
  50. 0x000000000000-0x000000100000 : "uboot"
  51. sdb:
  52. 0x000000100000-0x000000180000 : "uboot_env"
  53. 0x000000180000-0x000000200000 : "key_store"
  54. 0x000000200000-0x000000280000 : "info"
  55. 0x000000280000-0x000000c80000 : "etc"
  56. 0x000000c80000-0x000001680000 : "kernel_1"
  57. 0x000001680000-0x000004640000 : "rootfs1"
  58. 0x000004640000-0x000005040000 : "kernel_2"
  59. 0x000005040000-0x000008000000 : "rootfs2"
  60. sda1 sda2
  61. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  62. ehci_marvell ehci_marvell.70059: Marvell Orion EHCI
  63. ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1
  64. sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512.
  65. sdb1 sdb2
  66. sd 1:0:0:0: [sdb] Sector size 0 reported, assuming 512.
  67. sd 0:0:0:0: [sda] Attached SCSI disk
  68. sd 1:0:0:0: [sdb] Attached SCSI disk
  69. ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100
  70. ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00
  71. usb usb1: configuration #1 chosen from 1 choice
  72. hub 1-0:1.0: USB hub found
  73. hub 1-0:1.0: 1 port detected
  74. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  75. uhci_hcd: USB Universal Host Controller Interface driver
  76. usbcore: registered new interface driver usblp
  77. Initializing USB Mass Storage driver...
  78. usbcore: registered new interface driver usb-storage
  79. USB Mass Storage support registered.
  80. usbcore: registered new interface driver ums-datafab
  81. usbcore: registered new interface driver ums-freecom
  82. usbcore: registered new interface driver ums-jumpshot
  83. usbcore: registered new interface driver ums-sddr09
  84. usbcore: registered new interface driver ums-sddr55
  85. usbcore: registered new interface driver ums-usbat
  86. mice: PS/2 mouse device common for all mice
  87. i2c /dev entries driver
  88. rtc-pcf8563 0-0051: chip found, driver version 0.4.3
  89. rtc-pcf8563 0-0051: rtc core: registered rtc-pcf8563 as rtc0
  90. md: linear personality registered for level -1
  91. md: raid0 personality registered for level 0
  92. md: raid1 personality registered for level 1
  93. cpufreq: Setting CPU Frequency to 1200000 KHz
  94. cpufreq: Setting PowerSaveState to off
  95. sdhci: Secure Digital Host Controller Interface driver
  96. sdhci: Copyright(c) Pierre Ossman
  97. mmc0: mvsdio driver initialized, lacking card detect (fall back to polling)
  98. usbcore: registered new interface driver hiddev
  99. usbcore: registered new interface driver usbhid
  100. usbhid: v2.6:USB HID core driver
  101. TCP cubic registered
  102. NET: Registered protocol family 10
  103. lo: Disabled Privacy Extensions
  104. Mobile IPv6
  105. IPv6 over IPv4 tunneling driver
  106. sit0: Disabled Privacy Extensions
  107. ip6tnl0: Disabled Privacy Extensions
  108. NET: Registered protocol family 17
  109. RPC: Registered udp transport module.
  110. RPC: Registered tcp transport module.
  111. rtc-pcf8563 0-0051: setting system clock to 2018-08-28 00:13:04 UTC (1535415184)
  112. Freeing init memory: 2808K
  113. usb 1-1: new high speed USB device using ehci_marvell and address 2
  114. In hub_port_init, and number is 0, retry 0, port 1 .....
  115. usb 1-1: configuration #1 chosen from 1 choice
  116. hub 1-1:1.0: USB hub found
  117. hub 1-1:1.0: 4 ports detected
  118. eth0: mac address changed
  119. egiga0: link down
  120. egiga0: started
  121. ADDRCONF(NETDEV_UP): egiga0: link is not ready
  122. yaffs: dev is 32505862 name is "mtdblock6" ro
  123. yaffs: passed flags ""
  124. yaffs: Attempting MTD mount of 31.6,"mtdblock6"
  125. yaffs: restored from checkpoint
  126. yaffs_read_super: isCheckpointed 1
  127. egiga0: link up, full duplex, speed 1 Gbps
  128. ADDRCONF(NETDEV_CHANGE): egiga0: link becomes ready
  129. yaffs: dev is 32505860 name is "mtdblock4" rw
  130. yaffs: passed flags ""
  131. yaffs: Attempting MTD mount of 31.4,"mtdblock4"
  132. yaffs: restored from checkpoint
  133. yaffs_read_super: isCheckpointed 1
  134. NTFS driver 2.1.29 [Flags: R/O MODULE].
  135. tntfs: module license 'Commercial. For support email ntfs-support@tuxera.com.' taints kernel.
  136. Disabling lock debugging due to kernel taint
  137. Tuxera NTFS driver 3011.12.23 [Flags: R/W MODULE].
  138. PPP generic driver version 2.4.2
  139. PPP MPPE Compression module registered
  140. PPP Deflate Compression module registered
  141. NET: Registered protocol family 24
  142. PPP BSD Compression module registered
  143. egiga0: no IPv6 routers present
  144. md: md0 stopped.
  145. md: bind<sda2>
  146. md0: detected capacity change from 0 to 3000080728064
  147. md0: unknown partition table
  148. EXT4-fs (md0): barriers disabled
  149. kjournald2 starting: pid 1566, dev md0:8, commit interval 5 seconds
  150. EXT4-fs (md0): internal journal on md0:8
  151. EXT4-fs (md0): delayed allocation enabled
  152. EXT4-fs: file extents enabled
  153. EXT4-fs: mballoc enabled
  154. EXT4-fs (md0): recovery complete
  155. EXT4-fs (md0): mounted filesystem with writeback data mode
  156. md: md1 stopped.
  157. md: bind<sdb2>
  158. md1: detected capacity change from 0 to 4000273399808
  159. md1: unknown partition table
  160. EXT4-fs (md1): barriers disabled
  161. kjournald2 starting: pid 1623, dev md1:8, commit interval 5 seconds
  162. EXT4-fs (md1): internal journal on md1:8
  163. EXT4-fs (md1): delayed allocation enabled
  164. EXT4-fs: file extents enabled
  165. EXT4-fs: mballoc enabled
  166. EXT4-fs (md1): mounted filesystem with writeback data mode
  167. ADDRCONF(NETDEV_CHANGE): egiga0: link becomes ready
  168. DisablePowerSaving
  169. TimerState = 1
  170. EnablePowerSaving
  171. PowerSavingTime = 15
  172. Adding 498680k swap on /dev/sdb1. Priority:-1 extents:1 across:498680k
  173. Adding 524280k swap on /i-data/.zyxel/swap_ul6545p. Priority:-2 extents:4 across:315088888k
  174. svc: failed to register lockdv1 RPC service (errno 97).
  175. GbE port 0: TxEnable WA - Enabled, deep=1, tx_en_bk=1
  176.  
  177. Uncached vma c8b084f0 (addr 40b3c000 flags 080000ff phy 08be6000) from pid 3701
  178. Uncached vma c8b08440 (addr 40b3f000 flags 080000ff phy 08be6000) from pid 3701
  179. Uncached vma c8b08440 (addr 406fe000 flags 080000ff phy 08be6000) from pid 1341
  180. Uncached vma c8b08440 (addr 406fe000 flags 080000ff phy 08be6000) from pid 1341
  181. nfsd: last server has exited, flushing export cache
  182. EXT4-fs: mballoc: 0 blocks 0 reqs (0 success)
  183. EXT4-fs: mballoc: 0 extents scanned, 0 goal hits, 0 2^N hits, 0 breaks, 0 lost
  184. EXT4-fs: mballoc: 0 generated and it took 0
  185. EXT4-fs: mballoc: 0 preallocated, 0 discarded
  186. EXT2-fs warning: maximal mount count reached, running e2fsck is recommended
  187. Adding 329796k swap on /zyxel/mnt/sysdisk/swap_ul6545p. Priority:-2 extents:1348 across:491536k
  188. EXT4-fs (md0): barriers disabled
  189. kjournald2 starting: pid 5312, dev md0:8, commit interval 5 seconds
  190. EXT4-fs (md0): internal journal on md0:8
  191. EXT4-fs (md0): delayed allocation enabled
  192. EXT4-fs: file extents enabled
  193. EXT4-fs: mballoc enabled
  194. EXT4-fs (md0): mounted filesystem with writeback data mode
  195. Adding 524280k swap on /i-data/.zyxel/swap_ul6545p. Priority:-2 extents:4 across:315088888k
  196. svc: failed to register lockdv1 RPC service (errno 97).
  197. nfsd: last server has exited, flushing export cache
  198. EXT4-fs: mballoc: 124 blocks 24 reqs (21 success)
  199. EXT4-fs: mballoc: 99 extents scanned, 2 goal hits, 9 2^N hits, 0 breaks, 0 lost
  200. EXT4-fs: mballoc: 13 generated and it took 0
  201. EXT4-fs: mballoc: 567 preallocated, 55 discarded
  202. EXT2-fs warning: maximal mount count reached, running e2fsck is recommended
  203. Adding 329796k swap on /zyxel/mnt/sysdisk/swap_ul6545p. Priority:-2 extents:1348 across:491536k
  204. EXT4-fs (md1): barriers disabled
  205. kjournald2 starting: pid 7587, dev md1:8, commit interval 5 seconds
  206. EXT4-fs (md1): internal journal on md1:8
  207. EXT4-fs (md1): delayed allocation enabled
  208. EXT4-fs: file extents enabled
  209. EXT4-fs: mballoc enabled
  210. EXT4-fs (md1): mounted filesystem with writeback data mode
  211. Adding 524280k swap on /i-data/.zyxel/swap_ul6545p. Priority:-2 extents:4 across:315088888k
  212. svc: failed to register lockdv1 RPC service (errno 97).
  213. svc: 192.24.68.100, port=731: unknown version (4 for prog 100003, nfsd)
  214. svc: 192.24.68.100, port=799: unknown version (4 for prog 100003, nfsd)
  215. sd 0:0:0:0: [sda] Unhandled sense code
  216. sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
  217. sd 0:0:0:0: [sda] Sense Key : 0x3 [current] [descriptor]
  218. Descriptor sense data with sense descriptors (in hex):
  219. 72 03 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
  220. 0a 9a cc 10
  221. sd 0:0:0:0: [sda] ASC=0x0 ASCQ=0x0
  222. end_request: I/O error, dev sda, sector 177916944
  223. sd 0:0:0:0: [sda] Unhandled sense code
  224. sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
  225. sd 0:0:0:0: [sda] Sense Key : 0x3 [current] [descriptor]
  226. Descriptor sense data with sense descriptors (in hex):
  227. 72 03 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
  228. 0a 9a cc 10
  229. sd 0:0:0:0: [sda] ASC=0x0 ASCQ=0x0
  230. end_request: I/O error, dev sda, sector 177916944
  231. sd 0:0:0:0: [sda] Unhandled sense code
  232. sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
  233. sd 0:0:0:0: [sda] Sense Key : 0x3 [current] [descriptor]
  234. Descriptor sense data with sense descriptors (in hex):
  235. 72 03 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
  236. 0a 9a cc 80
  237. sd 0:0:0:0: [sda] ASC=0x0 ASCQ=0x0
  238. end_request: I/O error, dev sda, sector 177917056
  239. sd 0:0:0:0: [sda] Unhandled sense code
  240. sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
  241. sd 0:0:0:0: [sda] Sense Key : 0x3 [current] [descriptor]
  242. Descriptor sense data with sense descriptors (in hex):
  243. 72 03 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
  244. 0a 9a cc 10
  245. sd 0:0:0:0: [sda] ASC=0x0 ASCQ=0x0
  246. end_request: I/O error, dev sda, sector 177916944
  247. sd 0:0:0:0: [sda] Unhandled sense code
  248. sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
  249. sd 0:0:0:0: [sda] Sense Key : 0x3 [current] [descriptor]
  250. Descriptor sense data with sense descriptors (in hex):
  251. 72 03 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
  252. 0a 9a cc 10
  253. sd 0:0:0:0: [sda] ASC=0x0 ASCQ=0x0
  254. end_request: I/O error, dev sda, sector 177916944
  255. sd 0:0:0:0: [sda] Unhandled sense code
  256. sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
  257. sd 0:0:0:0: [sda] Sense Key : 0x3 [current] [descriptor]
  258. Descriptor sense data with sense descriptors (in hex):
  259. 72 03 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
  260. 0a 9a cc 10
  261. sd 0:0:0:0: [sda] ASC=0x0 ASCQ=0x0
  262. end_request: I/O error, dev sda, sector 177916944
  263. sd 0:0:0:0: [sda] Unhandled sense code
  264. sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
  265. sd 0:0:0:0: [sda] Sense Key : 0x3 [current] [descriptor]
  266. Descriptor sense data with sense descriptors (in hex):
  267. 72 03 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
  268. 0a 9a cc 10
  269. sd 0:0:0:0: [sda] ASC=0x0 ASCQ=0x0
  270. end_request: I/O error, dev sda, sector 177916944
  271.  
  272. ***************************************
  273. * HD1 stand by now! *
  274. ***************************************
  275.  
  276. ***************************************
  277. * HD0 stand by now! *
  278. ***************************************
  279.  
  280. #######################################
  281. # HD0 awaked by nfsd ! #
  282. #######################################
  283. ---> HD0 back to green on, off blink
  284.  
  285. #######################################
  286. # HD1 awaked by zyshd ! #
  287. #######################################
  288. ---> HD1 back to green on, off blink
  289.  
  290. ***************************************
  291. * HD0 stand by now! *
  292. ***************************************
  293.  
  294. #######################################
  295. # HD0 awaked by loop0 ! #
  296. #######################################
  297. ---> HD0 back to green on, off blink
  298.  
  299. ***************************************
  300. * HD0 stand by now! *
  301. ***************************************
  302.  
  303. ***************************************
  304. * HD1 stand by now! *
  305. ***************************************
  306.  
  307. #######################################
  308. # HD0 awaked by loop0 ! #
  309. #######################################
  310. ---> HD0 back to green on, off blink
  311.  
  312. #######################################
  313. # HD1 awaked by zyfw_downloader ! #
  314. #######################################
  315. ---> HD1 back to green on, off blink
  316.  
  317. ***************************************
  318. * HD0 stand by now! *
  319. ***************************************
  320.  
  321. ***************************************
  322. * HD1 stand by now! *
  323. ***************************************
  324.  
  325. #######################################
  326. # HD0 awaked by loop0 ! #
  327. #######################################
  328. ---> HD0 back to green on, off blink
  329.  
  330. #######################################
  331. # HD1 awaked by cp ! #
  332. #######################################
  333. ---> HD1 back to green on, off blink
  334.  
  335. ***************************************
  336. * HD0 stand by now! *
  337. ***************************************
  338.  
  339. ***************************************
  340. * HD1 stand by now! *
  341. ***************************************
  342.  
  343. #######################################
  344. # HD1 awaked by kjournald2 ! #
  345. #######################################
  346. ---> HD1 back to green on, off blink
  347.  
  348. ***************************************
  349. * HD1 stand by now! *
  350. ***************************************
  351.  
  352. #######################################
  353. # HD1 awaked by nfsd ! #
  354. #######################################
  355. ---> HD1 back to green on, off blink
  356.  
  357. #######################################
  358. # HD0 awaked by loop0 ! #
  359. #######################################
  360. ---> HD0 back to green on, off blink
  361. Uncached vma c9b85700 (addr 40b3c000 flags 080000ff phy 08be6000) from pid 31179
  362. Uncached vma c9b85808 (addr 40b3f000 flags 080000ff phy 08be6000) from pid 31179
  363. Uncached vma c9b85808 (addr 406fe000 flags 080000ff phy 08be6000) from pid 1341
  364. Uncached vma c9b85808 (addr 406fe000 flags 080000ff phy 08be6000) from pid 1341
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!